| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Both NetLabel and SELinux (other LSMs may grow to use it as well) rely
on the 'iif' field to determine the receiving network interface of
inbound packets. Unfortunately, at present this field is not
preserved across a skb clone operation which can lead to garbage
values if the cloned skb is sent back through the network stack. This
patch corrects this problem by properly copying the 'iif' field in
__skb_clone() and removing the 'iif' field assignment from
skb_act_clone() since it is no longer needed.
Also, while we are here, put the assignments in the same order as the
offsets to reduce cacheline bounces.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This finally adds the code in net_rx_action() to break out of the
->poll()'ing loop when a napi_disable() is found to be pending.
Now, even if a device is being flooded with packets it can be cleanly
brought down.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When used function put_cmsg() to copy kernel information to user
application memory, if the memory length given by user application is
not enough, by the bad length calculate of msg.msg_controllen,
put_cmsg() function may cause the msg.msg_controllen to be a large
value, such as 0xFFFFFFF0, so the following put_cmsg() can also write
data to usr application memory even usr has no valid memory to store
this. This may cause usr application memory overflow.
int put_cmsg(struct msghdr * msg, int level, int type, int len, void *data)
{
struct cmsghdr __user *cm
= (__force struct cmsghdr __user *)msg->msg_control;
struct cmsghdr cmhdr;
int cmlen = CMSG_LEN(len);
~~~~~~~~~~~~~~~~~~~~~
int err;
if (MSG_CMSG_COMPAT & msg->msg_flags)
return put_cmsg_compat(msg, level, type, len, data);
if (cm==NULL || msg->msg_controllen < sizeof(*cm)) {
msg->msg_flags |= MSG_CTRUNC;
return 0; /* XXX: return error? check spec. */
}
if (msg->msg_controllen < cmlen) {
~~~~~~~~~~~~~~~~~~~~~~~~
msg->msg_flags |= MSG_CTRUNC;
cmlen = msg->msg_controllen;
}
cmhdr.cmsg_level = level;
cmhdr.cmsg_type = type;
cmhdr.cmsg_len = cmlen;
err = -EFAULT;
if (copy_to_user(cm, &cmhdr, sizeof cmhdr))
goto out;
if (copy_to_user(CMSG_DATA(cm), data, cmlen - sizeof(struct cmsghdr)))
goto out;
cmlen = CMSG_SPACE(len);
~~~~~~~~~~~~~~~~~~~~~~~~~~~
If MSG_CTRUNC flags is set, msg->msg_controllen is less than
CMSG_SPACE(len), "msg->msg_controllen -= cmlen" will cause unsinged int
type msg->msg_controllen to be a large value.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
msg->msg_control += cmlen;
msg->msg_controllen -= cmlen;
~~~~~~~~~~~~~~~~~~~~~
err = 0;
out:
return err;
}
The same promble exists in put_cmsg_compat(). This patch can fix this
problem.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are some return value comments for void functions.
Fixed it.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The skb_morph function only freed the data part of the dst skb, but leaked
the auxiliary data such as the netfilter fields. This patch fixes this by
moving the relevant parts from __kfree_skb to skb_release_all and calling
it in skb_morph.
It also makes kfree_skbmem static since it's no longer called anywhere else
and it now no longer does skb_release_data.
Thanks to Yasuyuki KOZAKAI for finding this problem and posting a patch for
it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The pktgen_output_ipsec() function can unlock this lock twice
due to merged error and plain paths. Remove one of the calls
to spin_unlock.
Other possible solution would be to place "return 0" right
after the first unlock, but at this place the err is known
to be 0, so these solutions are the same except for this one
makes the code shorter.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The request_sock_queue's listen_opt is either vmalloc-ed or
kmalloc-ed depending on the number of table entries. Thus it
is expected to be handled properly on free, which is done in
the reqsk_queue_destroy().
However the error path in inet_csk_listen_start() calls
the lite version of reqsk_queue_destroy, called
__reqsk_queue_destroy, which calls the kfree unconditionally.
Fix this and move the __reqsk_queue_destroy into a .c file as
it looks too big to be inline.
As David also noticed, this is an error recovery path only,
so no locking is required and the lopt is known to be not NULL.
reqsk_queue_yank_listen_sk is also now only used in
net/core/request_sock.c so we should move it there too.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit fcc5a03ac42564e9e255c1134dda47442289e466:
[NET]: Allow netdev REGISTER/CHANGENAME events to fail
makes the register_netdevice_notifier() handle the error from the
NETDEV_REGISTER event, sent to the registering block.
The bad news is that in this case the notifier block is
not removed from the list, but the error is returned to the
caller. In case the caller is in module init function and
handles this error this can abort the module loading. The
notifier block will be then removed from the kernel, but
will be left in the list. Oops :(
I think that the notifier block should be removed from the
chain in case of error, regardless whether this error is
handled by the caller or not. In the worst case (the error
is _not_ handled) module will not receive the events any
longer.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch reverts Eric's commit 2b008b0a8e96b726c603c5e1a5a7a509b5f61e35
It diets .text & .data section of the kernel if CONFIG_NET_NS is not set.
This is safe after list operations cleanup.
Signed-of-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If CONFIG_NET_NS is not set, the only namespace is possible.
This patch removes list of pernet_operations and cleanups code a bit.
This list is not needed if there are no namespaces. We should just call
->init method.
Additionally, the ->exit will be called on module unloading only. This
case is safe - the code is not discarded. For the in/kernel code, ->exit
should never be called.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sysctl_{r,w}mem_max can now be unexported.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes a small memory leak. Default fib rules can be deleted by
the user if the rule does not carry FIB_RULE_PERMANENT flag, f.e. by
ip rule flush
Such a rule will not be freed as the ref-counter has 2 on start and becomes
clearly unreachable after removal.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* it already statically initialized
* reinitializing live global spinlock every time netns is
setup is also wrong
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
From: Joe Perches <joe@perches.com>
Based upon an initial patch and report by Luis R. Rodriguez.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The struct proto has the per-cpu "inuse" counter, which is handled
with a special care. All the handling code hides under the ifdef
CONFIG_SMP and it introduces some code duplication and makes it
look worse than it could.
Clean this.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Because net_free is called by copy_net_ns before its declaration, the
compiler gives an error. This patch puts net_free before copy_net_ns
to fix this.
The compiler error:
net/core/net_namespace.c: In function 'copy_net_ns':
net/core/net_namespace.c:97: error: implicit declaration of function 'net_free'
net/core/net_namespace.c: At top level:
net/core/net_namespace.c:104: warning: conflicting types for 'net_free'
net/core/net_namespace.c:104: error: static declaration of 'net_free' follows non-static declaration
net/core/net_namespace.c:97: error: previous implicit declaration of 'net_free' was here
The error was introduced by the '[NET]: Hide the dead code in the
net_namespace.c' patch (6a1a3b9f686bb04820a232cc1657ef2c45670709).
Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removing duplicit #includes for net/
Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
way.
"struct proto" currently uses an array stats[NR_CPUS] to track change on
'inuse' sockets per protocol.
If NR_CPUS is big, this means we use a big memory area for this.
Moreover, all this memory area is located on a single node on NUMA
machines, increasing memory pressure on the boot node.
In this patch, I tried to :
- Keep a fast !CONFIG_SMP implementation
- Keep a fast CONFIG_SMP implementation for often used protocols
(tcp,udp,raw,...)
- Introduce a NUMA efficient implementation
Some helper macros are defined in include/net/sock.h
These macros take into account CONFIG_SMP
If a "struct proto" is declared without using DEFINE_PROTO_INUSE /
REF_PROTO_INUSE
macros, it will automatically use a default implementation, using a
dynamically allocated percpu zone.
This default implementation will be NUMA efficient, but might use 32/64
bytes per possible cpu
because of current alloc_percpu() implementation.
However it still should be better than previous implementation based on
stats[NR_CPUS] field.
When a "struct proto" is changed to use the new macros, we use a single
static "int" percpu variable,
lowering the memory and cpu costs, still preserving NUMA efficiency.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
neigh_table_init_no_netlink() creates them, but they aren't removed anywhere.
Steps to reproduce:
modprobe clip
rmmod clip
cat /proc/net/stat/clip_arp_cache
BUG: unable to handle kernel paging request at virtual address f89d7758
printing eip: c05a99da *pdpt = 0000000000004001 *pde = 0000000004408067 *pte = 0000000000000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: atm af_packet ipv6 binfmt_misc sbs sbshc fan dock battery backlight ac power_supply parport loop rtc_cmos rtc_core rtc_lib serio_raw button k8temp hwmon amd_rng sr_mod cdrom shpchp pci_hotplug ehci_hcd ohci_hcd uhci_hcd usbcore
Pid: 2082, comm: cat Not tainted (2.6.24-rc1-b1d08ac064268d0ae2281e98bf5e82627e0f0c56-bloat #4)
EIP: 0060:[<c05a99da>] EFLAGS: 00210256 CPU: 0
EIP is at neigh_stat_seq_next+0x26/0x3f
EAX: 00000001 EBX: f89d7600 ECX: c587bf40 EDX: 00000000
ESI: 00000000 EDI: 00000001 EBP: 00000400 ESP: c587bf1c
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process cat (pid: 2082, ti=c587b000 task=c5984e10 task.ti=c587b000)
Stack: c06228cc c5313790 c049e5c0 0804f000 c45a7b00 c53137b0 00000000 00000000
00000082 00000001 00000000 00000000 00000000 fffffffb c58d6780 c049e437
c45a7b00 c04b1f93 c587bfa0 00000400 0804f000 00000400 0804f000 c04b1f2f
Call Trace:
[<c049e5c0>] seq_read+0x189/0x281
[<c049e437>] seq_read+0x0/0x281
[<c04b1f93>] proc_reg_read+0x64/0x77
[<c04b1f2f>] proc_reg_read+0x0/0x77
[<c048907e>] vfs_read+0x80/0xd1
[<c0489491>] sys_read+0x41/0x67
[<c04080fa>] sysenter_past_esp+0x6b/0xc1
=======================
Code: e9 ec 8d 05 00 56 8b 11 53 8b 40 70 8b 58 3c eb 29 0f a3 15 80 91 7b c0 19 c0 85 c0 8d 42 01 74 17 89 c6 c1 fe 1f 89 01 89 71 04 <8b> 83 58 01 00 00 f7 d0 8b 04 90 eb 09 89 c2 83 fa 01 7e d2 31
EIP: [<c05a99da>] neigh_stat_seq_next+0x26/0x3f SS:ESP 0068:c587bf1c
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sg_mark_end() overwrites the page_link information, but all users want
__sg_mark_end() behaviour where we just set the end bit. That is the most
natural way to use the sg list, since you'll fill it in and then mark the
end point.
So change sg_mark_end() to only set the termination bit. Add a sg_magic
debug check as well, and clear a chain pointer if it is set.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Documentation updates for network interfaces.
1. Add doc for netif_napi_add
2. Remove doc for unused returns from netif_rx
3. Add doc for netif_receive_skb
[ Incorporated minor mods from Randy Dunlap -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This cache is only required to create new namespaces,
but we won't have them in CONFIG_NET_NS=n case.
Hide it under the appropriate ifdef.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The setup_net is called for the init net namespace
only (int the CONFIG_NET_NS=n of course) from the __init
function, so mark it as __net_init to disappear with the
caller after the boot.
Yet again, in the perfect world this has to be under
#ifdef CONFIG_NET_NS, but it isn't guaranteed that every
subsystem is registered *after* the init_net_ns is set
up. After we are sure, that we don't start registering
them before the init net setup, we'll be able to move
this code under the ifdef.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The namespace creation/destruction code is never called
if the CONFIG_NET_NS is n, so it's OK to move it under
appropriate ifdef.
The copy_net_ns() in the "n" case checks for flags and
returns -EINVAL when new net ns is requested. In a perfect
world this stub must be in net_namespace.h, but this
function need to know the CLONE_NEWNET value and thus
requires sched.h. On the other hand this header is to be
injected into almost every .c file in the networking code,
and making all this code depend on the sched.h is a
suicidal attempt.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the new pernet something (subsys, device or operations) is
being registered, the init callback is to be called for each
namespace, that currently exitst in the system. During the
unregister, the same is to be done with the exit callback.
However, not every pernet something has both calls, but the
check for the appropriate pointer to be not NULL is performed
inside the for_each_net() loop.
This is (at least) strange, so tune this.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Finally, the zero_it argument can be completely removed from
the callers and from the function prototype.
Besides, fix the checkpatch.pl warnings about using the
assignments inside if-s.
This patch is rather big, and it is a part of the previous one.
I splitted it wishing to make the patches more readable. Hope
this particular split helped.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At this point nobody calls the sk_alloc(() with zero_it == 0,
so remove unneeded checks from it.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sk_prot_alloc() already performs all the stuff needed by the
sk_clone(). Besides, the sk_prot_alloc() requires almost twice
less arguments than the sk_alloc() does, so call the sk_prot_alloc()
saving the stack a bit.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The security_sk_alloc() and the module_get is a part of the
object allocations - move it in the proper place.
Note, that since we do not reset the newly allocated sock
in the sk_alloc() (memset() is removed with the previous
patch) we can safely do this.
Also fix the error path in sk_prot_alloc() - release the security
context if needed.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have a __GFP_ZERO flag that allocates a zeroed chunk of memory.
Use it in the sk_alloc() and avoid a hand-made memset().
This is a temporary patch that will help us in the nearest future :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sock object is allocated either from the generic cache with
the kmalloc, or from the proc->slab cache.
Move this logic into an isolated set of helpers and make the
sk_alloc/sk_free look a bit nicer.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sock_copy() is supposed to just clone the socket. In a perfect
world it has to be just memcpy, but we have to handle the security
mark correctly. All the extra setup must be performed in sk_clone()
call, so move the get_net() into more proper place.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sock_copy() call is not used outside the sock.c file,
so just move it into a sock.c
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes scatterlist corruptions added by
commit 68e3f5dd4db62619fdbe520d36c9ebf62e672256
[CRYPTO] users: Fix up scatterlist conversion errors
The issue is that the code calls sg_mark_end() which clobbers the
sg_page() pointer of the final scatterlist entry.
The first part fo the fix makes skb_to_sgvec() do __sg_mark_end().
After considering all skb_to_sgvec() call sites the most correct
solution is to call __sg_mark_end() in skb_to_sgvec() since that is
what all of the callers would end up doing anyways.
I suspect this might have fixed some problems in virtio_net which is
the sole non-crypto user of skb_to_sgvec().
Other similar sg_mark_end() cases were converted over to
__sg_mark_end() as well.
Arguably sg_mark_end() is a poorly named function because it doesn't
just "mark", it clears out the page pointer as a side effect, which is
what led to these bugs in the first place.
The one remaining plain sg_mark_end() call is in scsi_alloc_sgtable()
and arguably it could be converted to __sg_mark_end() if only so that
we can delete this confusing interface from linux/scatterlist.h
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a network namespace reference is held by a network subsystem,
and when this reference is decremented in a rcu update callback, we
must ensure that there is no more outstanding rcu update before
trying to free the network namespace.
In the normal case, the rcu_barrier is called when the network namespace
is exiting in the cleanup_net function.
But when a network namespace creation fails, and the subsystems are
undone (like the cleanup), the rcu_barrier is missing.
This patch adds the missing rcu_barrier.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Point 1:
The unregistering of a network device schedule a netdev_run_todo.
This function calls dev->destructor when it is set and the
destructor calls free_netdev.
Point 2:
In the case of an initialization of a network device the usual code
is:
* alloc_netdev
* register_netdev
-> if this one fails, call free_netdev and exit with error.
Point 3:
In the register_netdevice function at the later state, when the device
is at the registered state, a call to the netdevice_notifiers is made.
If one of the notification falls into an error, a rollback to the
registered state is done using unregister_netdevice.
Conclusion:
When a network device fails to register during initialization because
one network subsystem returned an error during a notification call
chain, the network device is freed twice because of fact 1 and fact 2.
The second free_netdev will be done with an invalid pointer.
Proposed solution:
The following patch move all the code of unregister_netdevice *except*
the call to net_set_todo, to a new function "rollback_registered".
The following functions are changed in this way:
* register_netdevice: calls rollback_registered when a notification fails
* unregister_netdevice: calls rollback_register + net_set_todo, the call
order to net_set_todo is changed because it is the
latest now. Since it justs add an element to a list
that should not break anything.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netpoll_poll_lock() synchronizes the ->poll() invocation
code paths, but once we have the lock we have to make
sure that NAPI_STATE_SCHED is still set. Otherwise we
get:
cpu 0 cpu 1
net_rx_action() poll_napi()
netpoll_poll_lock() ... spin on ->poll_lock
->poll()
netif_rx_complete
netpoll_poll_unlock() acquire ->poll_lock()
->poll()
netif_rx_complete()
CRASH
Based upon a bug report from Tina Yang.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The pid namespace patches changed the semantics of
find_task_by_pid without breaking the compile resulting
in get_net_ns_by_pid doing the wrong thing.
So switch to using the intended find_task_by_vpid.
Combined with Denis' earlier patch to make netlink traffic
fully synchronous the inadvertent race I introduced with
accessing current is actually removed.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not safe to to place struct pernet_operations in a special section.
We need struct pernet_operations to last until we call unregister_pernet_subsys.
Which doesn't happen until module unload.
So marking struct pernet_operations is a disaster for modules in two ways.
- We discard it before we call the exit method it points to.
- Because I keep struct pernet_operations on a linked list discarding
it for compiled in code removes elements in the middle of a linked
list and does horrible things for linked insert.
So this looks safe assuming __exit_refok is not discarded
for modules.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sock_enable_timestamp() no longer has any modular users.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prevent error/backtrace from dev_rename() when changing
name of network device to the same name. This is a common
situation with udev and other scripts that bind addr to device.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
clean skb_clone of any signs of CONFIG_NET_CLS_ACT and
have mirred us skb_act_clone()
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
[IPV4]: Explicitly call fib_get_table() in fib_frontend.c
[NET]: Use BUILD_BUG_ON in net/core/flowi.c
[NET]: Remove in-code externs for some functions from net/core/dev.c
[NET]: Don't declare extern variables in net/core/sysctl_net_core.c
[TCP]: Remove unneeded implicit type cast when calling tcp_minshall_update()
[NET]: Treat the sign of the result of skb_headroom() consistently
[9P]: Fix missing unlock before return in p9_mux_poll_start
[PKT_SCHED]: Fix sch_prio.c build with CONFIG_NETDEVICES_MULTIQUEUE
[IPV4] ip_gre: sendto/recvfrom NBMA address
[SCTP]: Consolidate sctp_ulpq_renege_xxx functions
[NETLINK]: Fix ACK processing after netlink_dump_start
[VLAN]: MAINTAINERS update
[DCCP]: Implement SIOCINQ/FIONREAD
[NET]: Validate device addr prior to interface-up
|
|
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.
Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Instead of ugly extern not-existing function.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Inconsistent prototype and real type for functions may have worse
consequences, than those for variables, so move them into a header.
Since they are used privately in net/core, make this file reside in
the same place.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some are already declared in include/linux/netdevice.h, while
some others (xfrm ones) need to be declared.
The driver/net/rrunner.c just uses same extern as well, so
cleanup it also.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
[IPSEC] IPV6: Fix to add tunnel mode SA correctly.
[NET]: Cut off the queue_mapping field from sk_buff
[NET]: Hide the queue_mapping field inside netif_subqueue_stopped
[NET]: Make and use skb_get_queue_mapping
[NET]: Use the skb_set_queue_mapping where appropriate
[INET]: Use MODULE_ALIAS_NET_PF_PROTO_TYPE where possible.
[INET]: Let inet_diag and friends autoload
[NIU]: Cleanup PAGE_SIZE checks a bit
[NET]: Fix SKB_WITH_OVERHEAD calculation
[ATM]: Fix clip module reload crash.
[TG3]: Update version to 3.85
[TG3]: PCI command adjustment
[TG3]: Add management FW version to ethtool report
[TG3]: Add 5723 support
[Bluetooth] Convert RFCOMM to use kthread API
[Bluetooth] Add constant for Bluetooth socket options level
[Bluetooth] Add support for handling simple eSCO links
[Bluetooth] Add address and channel attribute to RFCOMM TTY device
[Bluetooth] Fix wrong argument in debug code of HIDP
[Bluetooth] Add generic driver for Bluetooth USB devices
...
|
