summaryrefslogtreecommitdiff
path: root/net/can
AgeCommit message (Collapse)AuthorFilesLines
2022-01-22proc: remove PDE_DATA() completelyMuchun Song2-2/+2
Remove PDE_DATA() completely and replace it with pde_data(). [akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c] [akpm@linux-foundation.org: now fix it properly] Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-05can: isotp: convert struct tpcon::{idx,len} to unsigned intMarc Kleine-Budde1-2/+2
In isotp_rcv_ff() 32 bit of data received over the network is assigned to struct tpcon::len. Later in that function the length is checked for the maximal supported length against MAX_MSG_LENGTH. As struct tpcon::len is an "int" this check does not work, if the provided length overflows the "int". Later on struct tpcon::idx is compared against struct tpcon::len. To fix this problem this patch converts both struct tpcon::{idx,len} to unsigned int. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/20220105132429.1170627-1-mkl@pengutronix.de Cc: stable@vger.kernel.org Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Reported-by: syzbot+4c63f36709a642f801c5@syzkaller.appspotmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-11-06can: j1939: j1939_tp_cmd_recv(): check the dst address of TP.CM_BAMZhang Changzhong1-0/+5
The TP.CM_BAM message must be sent to the global address [1], so add a check to drop TP.CM_BAM sent to a non-global address. Without this patch, the receiver will treat the following packets as normal RTS/CTS transport: 18EC0102#20090002FF002301 18EB0102#0100000000000000 18EB0102#020000FFFFFFFFFF [1] SAE-J1939-82 2015 A.3.3 Row 1. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1635431907-15617-4-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-11-06can: j1939: j1939_can_recv(): ignore messages with invalid source addressZhang Changzhong1-0/+7
According to SAE-J1939-82 2015 (A.3.6 Row 2), a receiver should never send TP.CM_CTS to the global address, so we can add a check in j1939_can_recv() to drop messages with invalid source address. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1635431907-15617-3-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-11-06can: j1939: j1939_tp_cmd_recv(): ignore abort message in the BAM transportZhang Changzhong1-0/+6
This patch prevents BAM transport from being closed by receiving abort message, as specified in SAE-J1939-82 2015 (A.3.3 Row 4). Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1635431907-15617-2-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-24can: bcm: Use hrtimer_forward_now()Thomas Gleixner1-1/+1
hrtimer_forward_now() provides the same functionality as the open coded hrimer_forward() invocation. Prepares for removal of hrtimer_forward() from the public interfaces. Link: https://lore.kernel.org/all/20210923153339.684546907@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-can@vger.kernel.org Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: netdev@vger.kernel.org Cc: Jakub Kicinski <kuba@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-19can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX pathMarc Kleine-Budde1-0/+3
When the a large chunk of data send and the receiver does not send a Flow Control frame back in time, the sendmsg() does not return a error code, but the number of bytes sent corresponding to the size of the packet. If a timeout occurs the isotp_tx_timer_handler() is fired, sets sk->sk_err and calls the sk->sk_error_report() function. It was wrongly expected that the error would be propagated to user space in every case. For isotp_sendmsg() blocking on wait_event_interruptible() this is not the case. This patch fixes the problem by checking if sk->sk_err is set and returning the error to user space. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://github.com/hartkopp/can-isotp/issues/42 Link: https://github.com/hartkopp/can-isotp/pull/43 Link: https://lore.kernel.org/all/20210507091839.1366379-1-mkl@pengutronix.de Cc: stable@vger.kernel.org Reported-by: Sottas Guillaume (LMB) <Guillaume.Sottas@liebherr.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()Ziyang Xuan1-15/+31
When isotp_sendmsg() concurrent, tx.state of all TX processes can be ISOTP_IDLE. The conditions so->tx.state != ISOTP_IDLE and wq_has_sleeper(&so->wait) can not protect TX buffer from being accessed by multiple TX processes. We can use cmpxchg() to try to modify tx.state to ISOTP_SENDING firstly. If the modification of the previous process succeed, the later process must wait tx.state to ISOTP_IDLE firstly. Thus, we can ensure TX buffer is accessed by only one process at the same time. And we should also restore the original tx.state at the subsequent error processes. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/c2517874fbdf4188585cf9ddf67a8fa74d5dbde5.1633764159.git.william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible()Ziyang Xuan1-1/+3
Using wait_event_interruptible() to wait for complete transmission, but do not check the result of wait_event_interruptible() which can be interrupted. It will result in TX buffer has multiple accessors and the later process interferes with the previous process. Following is one of the problems reported by syzbot. ============================================================= WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0 Call Trace: <IRQ> ? isotp_setsockopt+0x390/0x390 __hrtimer_run_queues+0xb8/0x610 hrtimer_run_softirq+0x91/0xd0 ? rcu_read_lock_sched_held+0x4d/0x80 __do_softirq+0xe8/0x553 irq_exit_rcu+0xf8/0x100 sysvec_apic_timer_interrupt+0x9e/0xc0 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 Add result check for wait_event_interruptible() in isotp_sendmsg() to avoid multiple accessers for tx buffer. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/10ca695732c9dd267c76a3c30f37aefe1ff7e32f.1633764159.git.william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Reported-by: syzbot+78bab6958a614b0c80b9@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: j1939: j1939_xtp_rx_rts_session_new(): abort TP less than 9 bytesZhang Changzhong2-0/+3
The receiver should abort TP if 'total message size' in TP.CM_RTS and TP.CM_BAM is less than 9 or greater than 1785 [1], but currently the j1939 stack only checks the upper bound and the receiver will accept the following broadcast message: vcan1 18ECFF00 [8] 20 08 00 02 FF 00 23 01 vcan1 18EBFF00 [8] 01 00 00 00 00 00 00 00 vcan1 18EBFF00 [8] 02 00 FF FF FF FF FF FF This patch adds check for the lower bound and abort illegal TP. [1] SAE-J1939-82 A.3.4 Row 2 and A.3.6 Row 6. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1634203601-3460-1-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: j1939: j1939_xtp_rx_dat_one(): cancel session if receive TP.DT with ↵Zhang Changzhong1-2/+5
error length According to SAE-J1939-21, the data length of TP.DT must be 8 bytes, so cancel session when receive unexpected TP.DT message. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1632972800-45091-1-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_privZiyang Xuan1-2/+5
It will trigger UAF for rx_kref of j1939_priv as following. cpu0 cpu1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start j1939_priv_set j1939_priv_get_by_ndev_locked j1939_jsk_add ..... j1939_netdev_stop kref_put_lock(&priv->rx_kref, ...) kref_get(&priv->rx_kref, ...) REFCOUNT_WARN("addition on 0;...") ==================================================== refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0 RIP: 0010:refcount_warn_saturate+0x169/0x1e0 Call Trace: j1939_netdev_start+0x68b/0x920 j1939_sk_bind+0x426/0xeb0 ? security_socket_bind+0x83/0xb0 The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to protect. Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/20210926104757.2021540-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Reported-by: syzbot+85d9878b19c94f9019ad@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: j1939: j1939_tp_rxtimer(): fix errant alert in j1939_tp_rxtimerZiyang Xuan1-3/+2
When the session state is J1939_SESSION_DONE, j1939_tp_rxtimer() will give an alert "rx timeout, send abort", but do nothing actually. Move the alert into session active judgment condition, it is more reasonable. One of the scenarios is that j1939_tp_rxtimer() execute followed by j1939_xtp_rx_abort_one(). After j1939_xtp_rx_abort_one(), the session state is J1939_SESSION_DONE, then j1939_tp_rxtimer() give an alert. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/20210906094219.95924-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-05net: Remove redundant if statementsYajun Deng1-6/+2
The 'if (dev)' statement already move into dev_{put , hold}, so remove redundant if statements. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04can: j1939: extend UAPI to notify about RX statusOleksij Rempel3-34/+127
To be able to create applications with user friendly feedback, we need be able to provide receive status information. Typical ETP transfer may take seconds or even hours. To give user some clue or show a progress bar, the stack should push status updates. Same as for the TX information, the socket error queue will be used with following new signals: - J1939_EE_INFO_RX_RTS - received and accepted request to send signal. - J1939_EE_INFO_RX_DPO - received data package offset signal - J1939_EE_INFO_RX_ABORT - RX session was aborted Instead of completion signal, user will get data package. To activate this signals, application should set SOF_TIMESTAMPING_RX_SOFTWARE to the SO_TIMESTAMPING socket option. This will avoid unpredictable application behavior for the old software. Link: https://lore.kernel.org/r/20210707094854.30781-3-o.rempel@pengutronix.de Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-04can: j1939: rename J1939_ERRQUEUE_* to J1939_ERRQUEUE_TX_*Oleksij Rempel3-10/+10
Prepare the world for the J1939_ERRQUEUE_RX_ version Link: https://lore.kernel.org/r/20210707094854.30781-2-o.rempel@pengutronix.de Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-03can: j1939: j1939_session_tx_dat(): fix typoMarc Kleine-Budde1-1/+1
This patch fixes a typo in the j1939_session_tx_dat() function. Link: https://lore.kernel.org/r/20210729113917.1655492-1-mkl@pengutronix.de Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-5/+26
Conflicting commits, all resolutions pretty trivial: drivers/bus/mhi/pci_generic.c 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU") 56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean") drivers/nfc/s3fwrn5/firmware.c a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label") 46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") 801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") MAINTAINERS 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") 8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-25can: j1939: j1939_xtp_rx_dat_one(): use separate pointer for session skb ↵Marc Kleine-Budde1-4/+4
control buffer In the j1939_xtp_rx_dat_one() function, there are 2 variables (skb and se_skb) holding a skb. The control buffer of the skbs is accessed one after the other, but using the same "skcb" variable. To avoid confusion introduce a new variable "se_skcb" to access the se_skb's control buffer as done in the rest of this file, too. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-6-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: j1939_session_tx_dat(): use consistent name se_skcb for session ↵Marc Kleine-Budde1-4/+4
skb control buffer This patch changes the name of the "skcb" variable in j1939_session_tx_dat() to "se_skcb" as it's the session skb's control buffer. The same name is used in other functions for the session skb's control buffer. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: j1939_session_completed(): use consistent name se_skb for the ↵Marc Kleine-Budde1-4/+4
session skb This patch changes the name of the "skb" variable in j1939_session_completed() to "se_skb" as it's the session skb. The same name is used in other functions for the session skb. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: replace fall through comment by fallthrough pseudo-keywordMarc Kleine-Budde1-5/+10
Replace the existing /* fall through */ comments the new pseudo-keyword macro fallthrough. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: fix checkpatch warningsMarc Kleine-Budde1-2/+3
This patch fixes a checkpatch warning about a long line and wrong indention. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: j1939_sk_sock_destruct(): correct a grammatical errorgushengxian1-1/+1
Correct a grammatical error. Link: https://lore.kernel.org/r/20210611043933.17047-1-13145886936@163.com Signed-off-by: gushengxian <gushengxian@yulong.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-24can: j1939: j1939_xtp_rx_dat_one(): fix rxtimer value between consecutive ↵Zhang Changzhong1-1/+1
TP.DT to 750ms For receive side, the max time interval between two consecutive TP.DT should be 750ms. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/1625569210-47506-1-git-send-email-zhangchangzhong@huawei.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-24can: j1939: j1939_session_deactivate(): clarify lifetime of session objectOleksij Rempel1-2/+7
The j1939_session_deactivate() is decrementing the session ref-count and potentially can free() the session. This would cause use-after-free situation. However, the code calling j1939_session_deactivate() does always hold another reference to the session, so that it would not be free()ed in this code path. This patch adds a comment to make this clear and a WARN_ON, to ensure that future changes will not violate this requirement. Further this patch avoids dereferencing the session pointer as a precaution to avoid use-after-free if the session is actually free()ed. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/20210714111602.24021-1-o.rempel@pengutronix.de Reported-by: Xiaochen Zou <xzou017@ucr.edu> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-24can: raw: raw_setsockopt(): fix raw_rcv panic for sock UAFZiyang Xuan1-2/+18
We get a bug during ltp can_filter test as following. =========================================== [60919.264984] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [60919.265223] PGD 8000003dda726067 P4D 8000003dda726067 PUD 3dda727067 PMD 0 [60919.265443] Oops: 0000 [#1] SMP PTI [60919.265550] CPU: 30 PID: 3638365 Comm: can_filter Kdump: loaded Tainted: G W 4.19.90+ #1 [60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200 [60919.293289] RSP: 0018:ffff8d53bfc03cf8 EFLAGS: 00010246 [60919.307140] RAX: 0000000000000000 RBX: 000000000000001d RCX: 0000000000000007 [60919.320756] RDX: 0000000000000001 RSI: ffff8d5104a8ed00 RDI: ffff8d53bfc03d30 [60919.334319] RBP: ffff8d9338056800 R08: ffff8d53bfc29d80 R09: 0000000000000001 [60919.347969] R10: ffff8d53bfc03ec0 R11: ffffb8526ef47c98 R12: ffff8d53bfc03d30 [60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000 [60919.361148] R13: 0000000000000001 R14: ffff8d53bcf90000 R15: 0000000000000000 [60919.361151] FS: 00007fb78b6b3600(0000) GS:ffff8d53bfc00000(0000) knlGS:0000000000000000 [60919.400812] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [60919.413730] CR2: 0000000000000010 CR3: 0000003e3f784006 CR4: 00000000007606e0 [60919.426479] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [60919.439339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [60919.451608] PKRU: 55555554 [60919.463622] Call Trace: [60919.475617] <IRQ> [60919.487122] ? update_load_avg+0x89/0x5d0 [60919.498478] ? update_load_avg+0x89/0x5d0 [60919.509822] ? account_entity_enqueue+0xc5/0xf0 [60919.520709] security_sock_rcv_skb+0x2a/0x40 [60919.531413] sk_filter_trim_cap+0x47/0x1b0 [60919.542178] ? kmem_cache_alloc+0x38/0x1b0 [60919.552444] sock_queue_rcv_skb+0x17/0x30 [60919.562477] raw_rcv+0x110/0x190 [can_raw] [60919.572539] can_rcv_filter+0xbc/0x1b0 [can] [60919.582173] can_receive+0x6b/0xb0 [can] [60919.591595] can_rcv+0x31/0x70 [can] [60919.600783] __netif_receive_skb_one_core+0x5a/0x80 [60919.609864] process_backlog+0x9b/0x150 [60919.618691] net_rx_action+0x156/0x400 [60919.627310] ? sched_clock_cpu+0xc/0xa0 [60919.635714] __do_softirq+0xe8/0x2e9 [60919.644161] do_softirq_own_stack+0x2a/0x40 [60919.652154] </IRQ> [60919.659899] do_softirq.part.17+0x4f/0x60 [60919.667475] __local_bh_enable_ip+0x60/0x70 [60919.675089] __dev_queue_xmit+0x539/0x920 [60919.682267] ? finish_wait+0x80/0x80 [60919.689218] ? finish_wait+0x80/0x80 [60919.695886] ? sock_alloc_send_pskb+0x211/0x230 [60919.702395] ? can_send+0xe5/0x1f0 [can] [60919.708882] can_send+0xe5/0x1f0 [can] [60919.715037] raw_sendmsg+0x16d/0x268 [can_raw] It's because raw_setsockopt() concurrently with unregister_netdevice_many(). Concurrent scenario as following. cpu0 cpu1 raw_bind raw_setsockopt unregister_netdevice_many unlist_netdevice dev_get_by_index raw_notifier raw_enable_filters ...... can_rx_register can_rcv_list_find(..., net->can.rx_alldev_list) ...... sock_close raw_release(sock_a) ...... can_receive can_rcv_filter(net->can.rx_alldev_list, ...) raw_rcv(skb, sock_a) BUG After unlist_netdevice(), dev_get_by_index() return NULL in raw_setsockopt(). Function raw_enable_filters() will add sock and can_filter to net->can.rx_alldev_list. Then the sock is closed. Followed by, we sock_sendmsg() to a new vcan device use the same can_filter. Protocol stack match the old receiver whose sock has been released on net->can.rx_alldev_list in can_rcv_filter(). Function raw_rcv() uses the freed sock. UAF BUG is triggered. We can find that the key issue is that net_device has not been protected in raw_setsockopt(). Use rtnl_lock to protect net_device in raw_setsockopt(). Fixes: c18ce101f2e4 ("[CAN]: Add raw protocol") Link: https://lore.kernel.org/r/20210722070819.1048263-1-william.xuanziyang@huawei.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-5/+21
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-29net: sock: introduce sk_error_reportAlexander Aring4-17/+17
This patch introduces a function wrapper to call the sk_error_report callback. That will prepare to add additional handling whenever sk_error_report is called, for example to trace socket errors. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24can: j1939: j1939_sk_setsockopt(): prevent allocation of j1939 filter for ↵Norbert Slusarek1-1/+1
optlen == 0 If optval != NULL and optlen == 0 are specified for SO_J1939_FILTER in j1939_sk_setsockopt(), memdup_sockptr() will return ZERO_PTR for 0 size allocation. The new filter will be mistakenly assigned ZERO_PTR. This patch checks for optlen != 0 and filter will be assigned NULL in case of optlen == 0. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/20210620123842.117975-1-nslusarek@gmx.net Signed-off-by: Norbert Slusarek <nslusarek@gmx.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-20can: j1939: j1939_sk_init(): set SOCK_RCU_FREE to call sk_destruct() after ↵Oleksij Rempel2-0/+7
RCU is done Set SOCK_RCU_FREE to let RCU to call sk_destruct() on completion. Without this patch, we will run in to j1939_can_recv() after priv was freed by j1939_sk_release()->j1939_sk_sock_destruct() Fixes: 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") Link: https://lore.kernel.org/r/20210617130623.12705-1-o.rempel@pengutronix.de Cc: linux-stable <stable@vger.kernel.org> Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reported-by: syzbot+bdf710cfc41c186fdff3@syzkaller.appspotmail.com Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-20can: isotp: isotp_release(): omit unintended hrtimer restart on socket releaseOliver Hartkopp1-3/+4
When closing the isotp socket, the potentially running hrtimers are canceled before removing the subscription for CAN identifiers via can_rx_unregister(). This may lead to an unintended (re)start of a hrtimer in isotp_rcv_cf() and isotp_rcv_fc() in the case that a CAN frame is received by isotp_rcv() while the subscription removal is processed. However, isotp_rcv() is called under RCU protection, so after calling can_rx_unregister, we may call synchronize_rcu in order to wait for any RCU read-side critical sections to finish. This prevents the reception of CAN frames after hrtimer_cancel() and therefore the unintended (re)start of the hrtimers. Link: https://lore.kernel.org/r/20210618173713.2296-1-socketcan@hartkopp.net Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-20can: gw: synchronize rcu operations before removing gw job entryOliver Hartkopp1-0/+3
can_can_gw_rcv() is called under RCU protection, so after calling can_rx_unregister(), we have to call synchronize_rcu in order to wait for any RCU read-side critical sections to finish before removing the kmem_cache entry with the referenced gw job entry. Link: https://lore.kernel.org/r/20210618173645.2238-1-socketcan@hartkopp.net Fixes: c1aabdf379bc ("can-gw: add netlink based CAN routing") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-20can: bcm: delay release of struct bcm_op after synchronize_rcu()Thadeu Lima de Souza Cascardo1-1/+6
can_rx_register() callbacks may be called concurrently to the call to can_rx_unregister(). The callbacks and callback data, though, are protected by RCU and the struct sock reference count. So the callback data is really attached to the life of sk, meaning that it should be released on sk_destruct. However, bcm_remove_op() calls tasklet_kill(), and RCU callbacks may be called under RCU softirq, so that cannot be used on kernels before the introduction of HRTIMER_MODE_SOFT. However, bcm_rx_handler() is called under RCU protection, so after calling can_rx_unregister(), we may call synchronize_rcu() in order to wait for any RCU read-side critical sections to finish. That is, bcm_rx_handler() won't be called anymore for those ops. So, we only free them, after we do that synchronize_rcu(). Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Link: https://lore.kernel.org/r/20210619161813.2098382-1-cascardo@canonical.com Cc: linux-stable <stable@vger.kernel.org> Reported-by: syzbot+0f7e7e5e2f4f40fa89c0@syzkaller.appspotmail.com Reported-by: Norbert Slusarek <nslusarek@gmx.net> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-54/+185
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-16can: bcm: fix infoleak in struct bcm_msg_headNorbert Slusarek1-0/+3
On 64-bit systems, struct bcm_msg_head has an added padding of 4 bytes between struct members count and ival1. Even though all struct members are initialized, the 4-byte hole will contain data from the kernel stack. This patch zeroes out struct bcm_msg_head before usage, preventing infoleaks to userspace. Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Link: https://lore.kernel.org/r/trinity-7c1b2e82-e34f-4885-8060-2cd7a13769ce-1623532166177@3c-app-gmx-bs52 Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Norbert Slusarek <nslusarek@gmx.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-16can: bcm/raw/isotp: use per module netdevice notifierTetsuo Handa3-40/+142
syzbot is reporting hung task at register_netdevice_notifier() [1] and unregister_netdevice_notifier() [2], for cleanup_net() might perform time consuming operations while CAN driver's raw/bcm/isotp modules are calling {register,unregister}_netdevice_notifier() on each socket. Change raw/bcm/isotp modules to call register_netdevice_notifier() from module's __init function and call unregister_netdevice_notifier() from module's __exit function, as with gw/j1939 modules are doing. Link: https://syzkaller.appspot.com/bug?id=391b9498827788b3cc6830226d4ff5be87107c30 [1] Link: https://syzkaller.appspot.com/bug?id=1724d278c83ca6e6df100a2e320c10d991cf2bce [2] Link: https://lore.kernel.org/r/54a5f451-05ed-f977-8534-79e7aa2bcc8f@i-love.sakura.ne.jp Cc: linux-stable <stable@vger.kernel.org> Reported-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+0f1827363a305f74996f@syzkaller.appspotmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-16can: j1939: fix Use-after-Free, hold skb ref while in useOleksij Rempel1-14/+40
This patch fixes a Use-after-Free found by the syzbot. The problem is that a skb is taken from the per-session skb queue, without incrementing the ref count. This leads to a Use-after-Free if the skb is taken concurrently from the session queue due to a CTS. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/20210521115720.7533-1-o.rempel@pengutronix.de Cc: Hillf Danton <hdanton@sina.com> Cc: linux-stable <stable@vger.kernel.org> Reported-by: syzbot+220c1a29987a9a490903@syzkaller.appspotmail.com Reported-by: syzbot+45199c1b73b4013525cf@syzkaller.appspotmail.com Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-28Merge tag 'linux-can-next-for-5.14-20210527' of ↵Jakub Kicinski2-14/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== can-next 2021-05-27 The first 2 patches are by Geert Uytterhoeven and convert the rcan_can and rcan_canfd device tree bindings to yaml. The next 2 patches are by Oliver Hartkopp and me and update the CAN uapi headers. zuoqilin's patch removes an unnecessary variable from the CAN proc code. Patrick Menschel contributes 3 patches for CAN ISOTP to enhance the error messages. Jiapeng Chong's patch removes two dead stores from the softing driver. The next 4 patches are by me and silence several warnings found by clang compiler. Jimmy Assarsson's patches for the kvaser_usb driver add support for the Kvaser hydra devices. Dario Binacchi provides 2 patches for the c_can driver, first removing an unused variable, then adding basic ethtool support to query driver and ring parameter info. The last 4 patches are by Torin Cooper-Bennun and clean up the m_can driver. * tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (21 commits) can: m_can: fix whitespace in a few comments can: m_can: make TXESC, RXESC config more explicit can: m_can: clean up CCCR reg defs, order by revs can: m_can: use bits.h macros for all regmasks can: c_can: add ethtool support can: c_can: remove unused variable struct c_can_priv::rxmasked can: kvaser_usb: Add new Kvaser hydra devices can: kvaser_usb: Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID can: at91_can: silence clang warning can: mcp251xfd: silence clang warning can: mcp251x: mcp251x_can_probe(): silence clang warning can: hi311x: hi3110_can_probe(): silence clang warning can: softing: Remove redundant variable ptr can: isotp: Add error message if txqueuelen is too small can: isotp: add symbolic error message to isotp_module_init() can: isotp: change error format from decimal to symbolic error names can: proc: remove unnecessary variables can: uapi: introduce CANFD_FDF flag for mixed content in struct canfd_frame can: uapi: update CAN-FD frame description dt-bindings: can: rcar_canfd: Convert to json-schema ... ==================== Link: https://lore.kernel.org/r/20210527084532.1384031-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27can: isotp: Add error message if txqueuelen is too smallPatrick Menschel1-2/+4
This patch adds an additional error message in case that txqueuelen is set too small and advices the user to increase txqueuelen. This is likely to happen even with small transfers if txqueuelen is at default value 10 frames. Link: https://lore.kernel.org/r/20210427052150.2308-4-menschel.p@posteo.de Signed-off-by: Patrick Menschel <menschel.p@posteo.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-27can: isotp: add symbolic error message to isotp_module_init()Patrick Menschel1-1/+1
This patch adds the value of err with format %pe to the already existing error message. Link: https://lore.kernel.org/r/20210427052150.2308-3-menschel.p@posteo.de Signed-off-by: Patrick Menschel <menschel.p@posteo.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-27can: isotp: change error format from decimal to symbolic error namesPatrick Menschel1-6/+6
This patch changes the format string for errors from decimal %d to symbolic error names %pe to achieve more comprehensive log messages. Link: https://lore.kernel.org/r/20210427052150.2308-2-menschel.p@posteo.de Signed-off-by: Patrick Menschel <menschel.p@posteo.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-27can: proc: remove unnecessary variableszuoqilin1-5/+1
There is no need to define the variable "rate" to receive, just return directly. Link: https://lore.kernel.org/r/20210514100806.792-1-zuoqilin1@163.com Signed-off-by: zuoqilin <zuoqilin@yulong.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-12can: isotp: prevent race between isotp_bind() and isotp_setsockopt()Norbert Slusarek1-16/+33
A race condition was found in isotp_setsockopt() which allows to change socket options after the socket was bound. For the specific case of SF_BROADCAST support, this might lead to possible use-after-free because can_rx_unregister() is not called. Checking for the flag under the socket lock in isotp_bind() and taking the lock in isotp_setsockopt() fixes the issue. Fixes: 921ca574cd38 ("can: isotp: add SF_BROADCAST support for functional addressing") Link: https://lore.kernel.org/r/trinity-e6ae9efa-9afb-4326-84c0-f3609b9b8168-1620773528307@3c-app-gmx-bs06 Reported-by: Norbert Slusarek <nslusarek@gmx.net> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Norbert Slusarek <nslusarek@gmx.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-25can: proc: fix rcvlist_* header alignment on 64-bit systemErik Flodin1-2/+4
Before this fix, the function and userdata columns weren't aligned: device can_id can_mask function userdata matches ident vcan0 92345678 9fffffff 0000000000000000 0000000000000000 0 raw vcan0 123 00000123 0000000000000000 0000000000000000 0 raw After the fix they are: device can_id can_mask function userdata matches ident vcan0 92345678 9fffffff 0000000000000000 0000000000000000 0 raw vcan0 123 00000123 0000000000000000 0000000000000000 0 raw Link: Link: https://lore.kernel.org/r/20210425141440.229653-1-erik@flodin.me Signed-off-by: Erik Flodin <erik@flodin.me> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-29can: isotp: fix msg_namelen values depending on CAN_REQUIRED_SIZEOliver Hartkopp1-4/+7
Since commit f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") the sockaddr_can has been extended in size and a new CAN_REQUIRED_SIZE macro has been introduced to calculate the protocol specific needed size. The ABI for the msg_name and msg_namelen has not been adapted to the new CAN_REQUIRED_SIZE macro for the other CAN protocols which leads to a problem when an existing binary reads the (increased) struct sockaddr_can in msg_name. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Reported-by: Richard Weinberger <richard@nod.at> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Link: https://lore.kernel.org/linux-can/1135648123.112255.1616613706554.JavaMail.zimbra@nod.at/T/#t Link: https://lore.kernel.org/r/20210325125850.1620-2-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-29can: bcm/raw: fix msg_namelen values depending on CAN_REQUIRED_SIZEOliver Hartkopp2-10/+14
Since commit f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") the sockaddr_can has been extended in size and a new CAN_REQUIRED_SIZE macro has been introduced to calculate the protocol specific needed size. The ABI for the msg_name and msg_namelen has not been adapted to the new CAN_REQUIRED_SIZE macro for the other CAN protocols which leads to a problem when an existing binary reads the (increased) struct sockaddr_can in msg_name. Fixes: f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") Reported-by: Richard Weinberger <richard@nod.at> Tested-by: Richard Weinberger <richard@nod.at> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Link: https://lore.kernel.org/linux-can/1135648123.112255.1616613706554.JavaMail.zimbra@nod.at/T/#t Link: https://lore.kernel.org/r/20210325125850.1620-1-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-20can: isotp: tx-path: zero initialize outgoing CAN framesOliver Hartkopp1-3/+3
Commit d4eb538e1f48 ("can: isotp: TX-path: ensure that CAN frame flags are initialized") ensured the TX flags to be properly set for outgoing CAN frames. In fact the root cause of the issue results from a missing initialization of outgoing CAN frames created by isotp. This is no problem on the CAN bus as the CAN driver only picks the correctly defined content from the struct can(fd)_frame. But when the outgoing frames are monitored (e.g. with candump) we potentially leak some bytes in the unused content of struct can(fd)_frame. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Cc: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20210319100619.10858-1-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: isotp: TX-path: ensure that CAN frame flags are initializedMarc Kleine-Budde1-6/+3
The previous patch ensures that the TX flags (struct can_isotp_ll_options::tx_flags) are 0 for classic CAN frames or a user configured value for CAN-FD frames. This patch sets the CAN frames flags unconditionally to the ISO-TP TX flags, so that they are initialized to a proper value. Otherwise when running "candump -x" on a classical CAN ISO-TP stream shows wrongly set "B" and "E" flags. | $ candump any,0:0,#FFFFFFFF -extA | [...] | can0 TX B E 713 [8] 2B 0A 0B 0C 0D 0E 0F 00 | can0 TX B E 713 [8] 2C 01 02 03 04 05 06 07 | can0 TX B E 713 [8] 2D 08 09 0A 0B 0C 0D 0E | can0 TX B E 713 [8] 2E 0F 00 01 02 03 04 05 Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: isotp: isotp_setsockopt(): only allow to set low level TX flags for CAN-FDMarc Kleine-Budde1-1/+2
CAN-FD frames have struct canfd_frame::flags, while classic CAN frames don't. This patch refuses to set TX flags (struct can_isotp_ll_options::tx_flags) on non CAN-FD isotp sockets. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 00:45:31 +0300