summaryrefslogtreecommitdiff
path: root/net/bridge
AgeCommit message (Collapse)AuthorFilesLines
2022-11-10bridge: switchdev: Allow device drivers to install locked FDB entriesHans J. Schultz4-4/+27
When the bridge is offloaded to hardware, FDB entries are learned and aged-out by the hardware. Some device drivers synchronize the hardware and software FDBs by generating switchdev events towards the bridge. When a port is locked, the hardware must not learn autonomously, as otherwise any host will blindly gain authorization. Instead, the hardware should generate events regarding hosts that are trying to gain authorization and their MAC addresses should be notified by the device driver as locked FDB entries towards the bridge driver. Allow device drivers to notify the bridge driver about such entries by extending the 'switchdev_notifier_fdb_info' structure with the 'locked' bit. The bit can only be set by device drivers and not by the bridge driver. Prevent a locked entry from being installed if MAB is not enabled on the bridge port. If an entry already exists in the bridge driver, reject the locked entry if the current entry does not have the "locked" flag set or if it points to a different port. The same semantics are implemented in the software data path. Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-10bridge: switchdev: Let device drivers determine FDB offload indicationIdo Schimmel1-1/+1
Currently, FDB entries that are notified to the bridge via 'SWITCHDEV_FDB_ADD_TO_BRIDGE' are always marked as offloaded. With MAB enabled, this will no longer be universally true. Device drivers will report locked FDB entries to the bridge to let it know that the corresponding hosts required authorization, but it does not mean that these entries are necessarily programmed in the underlying hardware. Solve this by determining the offload indication based of the 'offloaded' bit in the FDB notification. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-04bridge: Add MAC Authentication Bypass (MAB) supportHans J. Schultz4-4/+65
Hosts that support 802.1X authentication are able to authenticate themselves by exchanging EAPOL frames with an authenticator (Ethernet bridge, in this case) and an authentication server. Access to the network is only granted by the authenticator to successfully authenticated hosts. The above is implemented in the bridge using the "locked" bridge port option. When enabled, link-local frames (e.g., EAPOL) can be locally received by the bridge, but all other frames are dropped unless the host is authenticated. That is, unless the user space control plane installed an FDB entry according to which the source address of the frame is located behind the locked ingress port. The entry can be dynamic, in which case learning needs to be enabled so that the entry will be refreshed by incoming traffic. There are deployments in which not all the devices connected to the authenticator (the bridge) support 802.1X. Such devices can include printers and cameras. One option to support such deployments is to unlock the bridge ports connecting these devices, but a slightly more secure option is to use MAB. When MAB is enabled, the MAC address of the connected device is used as the user name and password for the authentication. For MAB to work, the user space control plane needs to be notified about MAC addresses that are trying to gain access so that they will be compared against an allow list. This can be implemented via the regular learning process with the sole difference that learned FDB entries are installed with a new "locked" flag indicating that the entry cannot be used to authenticate the device. The flag cannot be set by user space, but user space can clear the flag by replacing the entry, thereby authenticating the device. Locked FDB entries implement the following semantics with regards to roaming, aging and forwarding: 1. Roaming: Locked FDB entries can roam to unlocked (authorized) ports, in which case the "locked" flag is cleared. FDB entries cannot roam to locked ports regardless of MAB being enabled or not. Therefore, locked FDB entries are only created if an FDB entry with the given {MAC, VID} does not already exist. This behavior prevents unauthenticated devices from disrupting traffic destined to already authenticated devices. 2. Aging: Locked FDB entries age and refresh by incoming traffic like regular entries. 3. Forwarding: Locked FDB entries forward traffic like regular entries. If user space detects an unauthorized MAC behind a locked port and wishes to prevent traffic with this MAC DA from reaching the host, it can do so using tc or a different mechanism. Enable the above behavior using a new bridge port option called "mab". It can only be enabled on a bridge port that is both locked and has learning enabled. Locked FDB entries are flushed from the port once MAB is disabled. A new option is added because there are pure 802.1X deployments that are not interested in notifications about locked FDB entries. Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-2/+2
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03bridge: Fix flushing of dynamic FDB entriesIdo Schimmel2-2/+2
The following commands should result in all the dynamic FDB entries being flushed, but instead all the non-local (non-permanent) entries are flushed: # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic # ip link set dev br0 type bridge fdb_flush # bridge fdb show brport dummy1 00:00:00:00:00:01 master br0 permanent 33:33:00:00:00:01 self permanent 01:00:5e:00:00:01 self permanent This is because br_fdb_flush() works with FDB flags and not the corresponding enumerator values. Fix by passing the FDB flag instead. After the fix: # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic # ip link set dev br0 type bridge fdb_flush # bridge fdb show brport dummy1 00:aa:bb:cc:dd:ee master br0 static 00:00:00:00:00:01 master br0 permanent 33:33:00:00:00:01 self permanent 01:00:5e:00:00:01 self permanent Fixes: 1f78ee14eeac ("net: bridge: fdb: add support for fine-grained flushing") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20221101185753.2120691-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-29net: Remove the obsolte u64_stats_fetch_*_irq() users (net).Thomas Gleixner2-4/+4
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-19bridge: mcast: Simplify MDB entry creationIdo Schimmel1-8/+3
Before creating a new MDB entry, br_multicast_new_group() will call br_mdb_ip_get() to see if one exists and return it if so. Therefore, simply call br_multicast_new_group() and omit the call to br_mdb_ip_get(). Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19bridge: mcast: Use spin_lock() instead of spin_lock_bh()Ido Schimmel1-4/+4
IGMPv3 / MLDv2 Membership Reports are only processed from the data path with softIRQ disabled, so there is no need to call spin_lock_bh(). Use spin_lock() instead. This is consistent with how other IGMP / MLD packets are processed. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30net: bridge: assign path_cost for 2.5G and 5G link speedSteven Hsieh1-1/+10
As 2.5G, 5G ethernet ports are more common and affordable, these ports are being used in LAN bridge devices. STP port_cost() is missing path_cost assignment for these link speeds, causes highest cost 100 being used. This result in lower speed port being picked when there is loop between 5G and 1G ports. Original path_cost: 10G=2, 1G=4, 100m=19, 10m=100 Adjusted path_cost: 10G=2, 5G=3, 2.5G=4, 1G=5, 100m=19, 10m=100 speed greater than 10G = 1 Signed-off-by: Steven Hsieh <steven.hsieh@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+3
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21netfilter: ebtables: fix memory leak when blob is malformedFlorian Westphal1-1/+3
The bug fix was incomplete, it "replaced" crash with a memory leak. The old code had an assignment to "ret" embedded into the conditional, restore this. Fixes: 7997eff82828 ("netfilter: ebtables: reject blobs that don't provide all entry points") Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni2-0/+3
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-31netfilter: br_netfilter: Drop dst references before setting.Harsh Modi2-0/+3
The IPv6 path already drops dst in the daddr changed case, but the IPv4 path does not. This change makes the two code paths consistent. Further, it is possible that there is already a metadata_dst allocated from ingress that might already be attached to skbuff->dst while following the bridge path. If it is not released before setting a new metadata_dst, it will be leaked. This is similar to what is done in bpf_set_tunnel_key() or ip6_route_input(). It is important to note that the memory being leaked is not the dst being set in the bridge code, but rather memory allocated from some other code path that is not being freed correctly before the skb dst is overwritten. An example of the leakage fixed by this commit found using kmemleak: unreferenced object 0xffff888010112b00 (size 256): comm "softirq", pid 0, jiffies 4294762496 (age 32.012s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 80 16 f1 83 ff ff ff ff ................ e1 4e f6 82 ff ff ff ff 00 00 00 00 00 00 00 00 .N.............. backtrace: [<00000000d79567ea>] metadata_dst_alloc+0x1b/0xe0 [<00000000be113e13>] udp_tun_rx_dst+0x174/0x1f0 [<00000000a36848f4>] geneve_udp_encap_recv+0x350/0x7b0 [<00000000d4afb476>] udp_queue_rcv_one_skb+0x380/0x560 [<00000000ac064aea>] udp_unicast_rcv_skb+0x75/0x90 [<000000009a8ee8c5>] ip_protocol_deliver_rcu+0xd8/0x230 [<00000000ef4980bb>] ip_local_deliver_finish+0x7a/0xa0 [<00000000d7533c8c>] __netif_receive_skb_one_core+0x89/0xa0 [<00000000a879497d>] process_backlog+0x93/0x190 [<00000000e41ade9f>] __napi_poll+0x28/0x170 [<00000000b4c0906b>] net_rx_action+0x14f/0x2a0 [<00000000b20dd5d4>] __do_softirq+0xf4/0x305 [<000000003a7d7e15>] __irq_exit_rcu+0xc3/0x140 [<00000000968d39a2>] sysvec_apic_timer_interrupt+0x9e/0xc0 [<000000009e920794>] asm_sysvec_apic_timer_interrupt+0x16/0x20 [<000000008942add0>] native_safe_halt+0x13/0x20 Florian Westphal says: "Original code was likely fine because nothing ever did set a skb->dst entry earlier than bridge in those days." Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Harsh Modi <harshmodi@google.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-31/+1
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23netfilter: ebtables: reject blobs that don't provide all entry pointsFlorian Westphal4-31/+1
Harshit Mogalapalli says: In ebt_do_table() function dereferencing 'private->hook_entry[hook]' can lead to NULL pointer dereference. [..] Kernel panic: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [..] RIP: 0010:ebt_do_table+0x1dc/0x1ce0 Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 5c 16 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 6c df 08 48 8d 7d 2c 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 88 [..] Call Trace: nf_hook_slow+0xb1/0x170 __br_forward+0x289/0x730 maybe_deliver+0x24b/0x380 br_flood+0xc6/0x390 br_dev_xmit+0xa2e/0x12c0 For some reason ebtables rejects blobs that provide entry points that are not supported by the table, but what it should instead reject is the opposite: blobs that DO NOT provide an entry point supported by the table. t->valid_hooks is the bitmask of hooks (input, forward ...) that will see packets. Providing an entry point that is not support is harmless (never called/used), but the inverse isn't: it results in a crash because the ebtables traverser doesn't expect a NULL blob for a location its receiving packets for. Instead of fixing all the individual checks, do what iptables is doing and reject all blobs that differ from the expected hooks. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2022-08-23net: bridge: move DSA master bridging restriction to DSAVladimir Oltean1-20/+0
When DSA gains support for multiple CPU ports in a LAG, it will become mandatory to monitor the changeupper events for the DSA master. In fact, there are already some restrictions to be imposed in that area, namely that a DSA master cannot be a bridge port except in some special circumstances. Centralize the restrictions at the level of the DSA layer as a preliminary step. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-23bridge: move from strlcpy with unused retval to strscpyWolfram Sang3-7/+7
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220818210212.8347-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+6
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26bridge: Do not send empty IFLA_AF_SPEC attributeBenjamin Poirier1-2/+6
After commit b6c02ef54913 ("bridge: Netlink interface fix."), br_fill_ifinfo() started to send an empty IFLA_AF_SPEC attribute when a bridge vlan dump is requested but an interface does not have any vlans configured. iproute2 ignores such an empty attribute since commit b262a9becbcb ("bridge: Fix output with empty vlan lists") but older iproute2 versions as well as other utilities have their output changed by the cited kernel commit, resulting in failed test cases. Regardless, emitting an empty attribute is pointless and inefficient. Avoid this change by canceling the attribute if no AF_SPEC data was added. Fixes: b6c02ef54913 ("bridge: Netlink interface fix.") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220725001236.95062-1-bpoirier@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-11netfilter: nf_tables: add and use BE register load-store helpersFlorian Westphal1-1/+1
Same as the existing ones, no conversions. This is just for sparse sake only so that we no longer mix be16/u16 and be32/u32 types. Alternative is to add __force __beX in various places, but this seems nicer. objdiff shows no changes. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+18
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c 9c5de246c1db ("net: sparx5: mdb add/del handle non-sparx5 devices") fbb89d02e33a ("net: sparx5: Allow mdb entries to both CPU and ports") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27netfilter: br_netfilter: do not skip all hooks with 0 priorityFlorian Westphal1-3/+18
When br_netfilter module is loaded, skbs may be diverted to the ipv4/ipv6 hooks, just like as if we were routing. Unfortunately, bridge filter hooks with priority 0 may be skipped in this case. Example: 1. an nftables bridge ruleset is loaded, with a prerouting hook that has priority 0. 2. interface is added to the bridge. 3. no tcp packet is ever seen by the bridge prerouting hook. 4. flush the ruleset 5. load the bridge ruleset again. 6. tcp packets are processed as expected. After 1) the only registered hook is the bridge prerouting hook, but its not called yet because the bridge hasn't been brought up yet. After 2), hook order is: 0 br_nf_pre_routing // br_netfilter internal hook 0 chain bridge f prerouting // nftables bridge ruleset The packet is diverted to br_nf_pre_routing. If call-iptables is off, the nftables bridge ruleset is called as expected. But if its enabled, br_nf_hook_thresh() will skip it because it assumes that all 0-priority hooks had been called previously in bridge context. To avoid this, check for the br_nf_pre_routing hook itself, we need to resume directly after it, even if this hook has a priority of 0. Unfortunately, this still results in different packet flow. With this fix, the eval order after in 3) is: 1. br_nf_pre_routing 2. ip(6)tables (if enabled) 3. nftables bridge but after 5 its the much saner: 1. nftables bridge 2. br_nf_pre_routing 3. ip(6)tables (if enabled) Unfortunately I don't see a solution here: It would be possible to move br_nf_pre_routing to a higher priority so that it will be called later in the pipeline, but this also impacts ebtables evaluation order, and would still result in this very ordering problem for all nftables-bridge hooks with the same priority as the br_nf_pre_routing one. Searching back through the git history I don't think this has ever behaved in any other way, hence, no fixes-tag. Reported-by: Radim Hrazdil <rhrazdil@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-06-15net: bridge: allow add/remove permanent mdb entries on disabled portsCasper Andersson1-6/+9
Adding mdb entries on disabled ports allows you to do setup before accepting any traffic, avoiding any time where the port is not in the multicast group. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-10net: adopt u64_stats_t in struct pcpu_sw_netstatsEric Dumazet2-20/+24
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type") we should use u64_stats_t and related accessors to avoid load/store tearing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-10net: rename reference+tracking helpersJakub Kicinski1-5/+5
Netdev reference helpers have a dev_ prefix for historic reasons. Renaming the old helpers would be too much churn but we can rename the tracking ones which are relatively recent and should be the default for new code. Rename: dev_hold_track() -> netdev_hold() dev_put_track() -> netdev_put() dev_replace_track() -> netdev_ref_replace() Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+7
drivers/net/ethernet/mellanox/mlx5/core/main.c b33886971dbc ("net/mlx5: Initialize flow steering during driver probe") 40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support") f2b41b32cde8 ("net/mlx5: Remove ipsec_ops function table") https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/ 16d42d313350 ("net/mlx5: Drain fw_reset when removing device") 8324a02c342a ("net/mlx5: Add exit route when waiting for FW") https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh e274f7154008 ("selftests: mptcp: add subflow limits test-cases") b6e074e171bc ("selftests: mptcp: add infinite map testcase") 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type") https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/ net/mptcp/options.c ba2c89e0ea74 ("mptcp: fix checksum byte order") 1e39e5a32ad7 ("mptcp: infinite mapping sending") ea66758c1795 ("tcp: allow MPTCP to update the announced window") https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/ net/mptcp/pm.c 95d686517884 ("mptcp: fix subflow accounting on close") 4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs") https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/ net/mptcp/subflow.c ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure") 0348c690ed37 ("mptcp: add the fallback check") f8d4bcacff3b ("mptcp: infinite mapping receiving") https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.Andrew Lunn1-0/+7
It is possible to stack bridges on top of each other. Consider the following which makes use of an Ethernet switch: br1 / \ / \ / \ br0.11 wlan0 | br0 / | \ p1 p2 p3 br0 is offloaded to the switch. Above br0 is a vlan interface, for vlan 11. This vlan interface is then a slave of br1. br1 also has a wireless interface as a slave. This setup trunks wireless lan traffic over the copper network inside a VLAN. A frame received on p1 which is passed up to the bridge has the skb->offload_fwd_mark flag set to true, indicating that the switch has dealt with forwarding the frame out ports p2 and p3 as needed. This flag instructs the software bridge it does not need to pass the frame back down again. However, the flag is not getting reset when the frame is passed upwards. As a result br1 sees the flag, wrongly interprets it, and fails to forward the frame to wlan0. When passing a frame upwards, clear the flag. This is the Rx equivalent of br_switchdev_frame_unmark() in br_dev_xmit(). Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-09rtnetlink: add extack support in fdb del handlersAlaa Mohamed2-2/+4
Add extack support to .ndo_fdb_del in netdevice.h and all related methods. Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski1-6/+6
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+2
include/linux/netdevice.h net/core/dev.c 6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats") 794c24e9921f ("net-core: rx_otherhost_dropped to core_stats") https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/ drivers/net/wan/cosa.c d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()") 89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards") https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-23net: bridge: switchdev: check br_vlan_group() return valueClément Léger1-0/+2
br_vlan_group() can return NULL and thus return value must be checked to avoid dereferencing a NULL pointer. Fixes: 6284c723d9b9 ("net: bridge: mst: Notify switchdev drivers of VLAN MSTI migrations") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220421101247.121896-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-13net: bridge: fdb: add support for flush filtering based on ifindex and vlanNikolay Aleksandrov1-1/+44
Add support for fdb flush filtering based on destination ifindex and vlan id. The ifindex must either match a port's device ifindex or the bridge's. The vlan support is trivial since it's already validated by rtnl_fdb_del, we just need to fill it in. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: bridge: fdb: add support for flush filtering based on ndm flags and stateNikolay Aleksandrov2-3/+60
Add support for fdb flush filtering based on ndm flags and state. NDM state and flags are mapped to bridge-specific flags and matched according to the specified masks. NTF_USE is used to represent added_by_user flag since it sets it on fdb add and we don't have a 1:1 mapping for it. Only allowed bits can be set, NTF_SELF and NTF_MASTER are ignored. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: bridge: fdb: add support for fine-grained flushingNikolay Aleksandrov4-12/+54
Add the ability to specify exactly which fdbs to be flushed. They are described by a new structure - net_bridge_fdb_flush_desc. Currently it can match on port/bridge ifindex, vlan id and fdb flags. It is used to describe the existing dynamic fdb flush operation. Note that this flush operation doesn't treat permanent entries in a special way (fdb_delete vs fdb_delete_local), it will delete them regardless if any port is using them, so currently it can't directly replace deletes which need to handle that case, although we can extend it later for that too. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: bridge: fdb: add ndo_fdb_del_bulkNikolay Aleksandrov3-0/+27
Add a minimal ndo_fdb_del_bulk implementation which flushes all entries. Support for more fine-grained filtering will be added in the following patches. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-12net: bridge: add support for host l2 mdb entriesJoachim Wiberg1-5/+7
This patch expands on the earlier work on layer-2 mdb entries by adding support for host entries. Due to the fact that host joined entries do not have any flag field, we infer the permanent flag when reporting the entries to userspace, which otherwise would be listed as 'temp'. Before patch: ~# bridge mdb add dev br0 port br0 grp 01:00:00:c0:ff:ee permanent Error: bridge: Flags are not allowed for host groups. ~# bridge mdb add dev br0 port br0 grp 01:00:00:c0:ff:ee Error: bridge: Only permanent L2 entries allowed. After patch: ~# bridge mdb add dev br0 port br0 grp 01:00:00:c0:ff:ee permanent ~# bridge mdb show dev br0 port br0 grp 01:00:00:c0:ff:ee permanent vid 1 Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12net: bridge: offload BR_HAIRPIN_MODE, BR_ISOLATED, BR_MULTICAST_TO_UNICASTArınç ÜNAL1-1/+2
Add BR_HAIRPIN_MODE, BR_ISOLATED and BR_MULTICAST_TO_UNICAST port flags to BR_PORT_FLAGS_HW_OFFLOAD so that switchdev drivers which have an offloaded data plane have a chance to reject these bridge port flags if they don't support them yet. It makes the code path go through the SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS driver handlers, which return -EINVAL for everything they don't recognize. For drivers that don't catch SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS at all, switchdev will return -EOPNOTSUPP for those which is then ignored, but those are in the minority. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220410134227.18810-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-23net: bridge: mst: Restrict info size queries to bridge portsTobias Waldekranz1-1/+1
Ensure that no bridge masters are ever considered for MST info dumping. MST states are only supported on bridge ports, not bridge masters - which br_mst_info_size relies on. Fixes: 122c29486e1f ("net: bridge: mst: Support setting and reporting MST port states") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Link: https://lore.kernel.org/r/20220322133001.16181-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22net: bridge: mst: prevent NULL deref in br_mst_info_size()Eric Dumazet1-1/+1
Call br_mst_info_size() only if vg pointer is not NULL. general protection fault, probably for non-canonical address 0xdffffc0000000058: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000002c0-0x00000000000002c7] CPU: 0 PID: 975 Comm: syz-executor.0 Tainted: G W 5.17.0-next-20220321-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:br_mst_info_size+0x97/0x270 net/bridge/br_mst.c:242 Code: 00 00 31 c0 e8 ba 10 53 f9 31 c0 b9 40 00 00 00 4c 8d 6c 24 30 4c 89 ef f3 48 ab 48 8d 83 c0 02 00 00 48 89 04 24 48 c1 e8 03 <80> 3c 28 00 0f 85 ae 01 00 00 48 8b 83 c0 02 00 00 41 bf 04 00 00 RSP: 0018:ffffc900153770a8 EFLAGS: 00010202 RAX: 0000000000000058 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff88259876 RDI: ffffc900153772d8 RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffffff8db68957 R10: ffffffff881f737b R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900153770d8 R14: 00000000000002a0 R15: 00000000ffffffff FS: 00007f18bbb6f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020001a80 CR3: 000000001a7d9000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 00000000000000d8 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> br_get_link_af_size_filtered+0x6e9/0xc00 net/bridge/br_netlink.c:123 rtnl_link_get_af_size net/core/rtnetlink.c:598 [inline] if_nlmsg_size+0x40c/0xa50 net/core/rtnetlink.c:1040 rtnl_calcit.isra.0+0x25f/0x460 net/core/rtnetlink.c:3780 rtnetlink_rcv_msg+0xa65/0xb80 net/core/rtnetlink.c:5937 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f18baa89049 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f18bbb6f168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f18bab9bf60 RCX: 00007f18baa89049 RDX: 0000000000000000 RSI: 0000000020001a80 RDI: 0000000000000004 RBP: 00007f18baae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffeedb2be2f R14: 00007f18bbb6f300 R15: 0000000000022000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:br_mst_info_size+0x97/0x270 net/bridge/br_mst.c:242 Code: 00 00 31 c0 e8 ba 10 53 f9 31 c0 b9 40 00 00 00 4c 8d 6c 24 30 4c 89 ef f3 48 ab 48 8d 83 c0 02 00 00 48 89 04 24 48 c1 e8 03 <80> 3c 28 00 0f 85 ae 01 00 00 48 8b 83 c0 02 00 00 41 bf 04 00 00 RSP: 0018:ffffc900153770a8 EFLAGS: 00010202 RAX: 0000000000000058 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff88259876 RDI: ffffc900153772d8 RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffffff8db68957 R10: ffffffff881f737b R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900153770d8 R14: 00000000000002a0 R15: 00000000ffffffff FS: 00007f18bbb6f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2ca22000 CR3: 000000001a7d9000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 00000000000000d8 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 122c29486e1f ("net: bridge: mst: Support setting and reporting MST port states") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tobias Waldekranz <tobias@waldekranz.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220322012314.795187-1-eric.dumazet@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-20netfilter: nft_meta: extend reduce support to bridge familyFlorian Westphal1-0/+1
its enough to export the meta get reduce helper and then call it from nft_meta_bridge too. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: nf_tables: cancel tracking for clobbered destination registersPablo Neira Ayuso1-2/+2
Output of expressions might be larger than one single register, this might clobber existing data. Reset tracking for all destination registers that required to store the expression output. This patch adds three new helper functions: - nft_reg_track_update: cancel previous register tracking and update it. - nft_reg_track_cancel: cancel any previous register tracking info. - __nft_reg_track_cancel: cancel only one single register tracking info. Partial register clobbering detection is also supported by checking the .num_reg field which describes the number of register that are used. This patch updates the following expressions: - meta_bridge - bitwise - byteorder - meta - payload to use these helper functions. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: nf_tables: do not reduce read-only expressionsPablo Neira Ayuso1-0/+1
Skip register tracking for expressions that perform read-only operations on the registers. Define and use a cookie pointer NFT_REDUCE_READONLY to avoid defining stubs for these expressions. This patch re-enables register tracking which was disabled in ed5f85d42290 ("netfilter: nf_tables: disable register tracking"). Follow up patches add remaining register tracking for existing expressions. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-18net: bridge: mst: Add helper to query a port's MST stateTobias Waldekranz1-0/+25
This is useful for switchdev drivers who are offloading MST states into hardware. As an example, a driver may wish to flush the FDB for a port when it transitions from forwarding to blocking - which means that the previous state must be discoverable. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18net: bridge: mst: Add helper to check if MST is enabledTobias Waldekranz1-0/+9
This is useful for switchdev drivers that might want to refuse to join a bridge where MST is enabled, if the hardware can't support it. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18net: bridge: mst: Add helper to map an MSTI to a VID setTobias Waldekranz1-0/+26
br_mst_get_info answers the question: "On this bridge, which VIDs are mapped to the given MSTI?" This is useful in switchdev drivers, which might have to fan-out operations, relating to an MSTI, per VLAN. An example: When a port's MST state changes from forwarding to blocking, a driver may choose to flush the dynamic FDB entries on that port to get faster reconvergence of the network, but this should only be done in the VLANs that are managed by the MSTI in question. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18net: bridge: mst: Notify switchdev drivers of MST state changesTobias Waldekranz1-0/+18
Generate a switchdev notification whenever an MST state changes. This notification is keyed by the VLANs MSTI rather than the VID, since multiple VLANs may share the same MST instance. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18net: bridge: mst: Notify switchdev drivers of VLAN MSTI migrationsTobias Waldekranz2-0/+59
Whenever a VLAN moves to a new MSTI, send a switchdev notification so that switchdevs can track a bridge's VID to MSTI mappings. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18net: bridge: mst: Notify switchdev drivers of MST mode changesTobias Waldekranz1-0/+11
Trigger a switchdev event whenever the bridge's MST mode is enabled/disabled. This allows constituent ports to either perform any required hardware config, or refuse the change if it not supported. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18net: bridge: mst: Support setting and reporting MST port statesTobias Waldekranz3-1/+192
Make it possible to change the port state in a given MSTI by extending the bridge port netlink interface (RTM_SETLINK on PF_BRIDGE).The proposed iproute2 interface would be: bridge mst set dev <PORT> msti <MSTI> state <STATE> Current states in all applicable MSTIs can also be dumped via a corresponding RTM_GETLINK. The proposed iproute interface looks like this: $ bridge mst port msti vb1 0 state forwarding 100 state disabled vb2 0 state forwarding 100 state forwarding The preexisting per-VLAN states are still valid in the MST mode (although they are read-only), and can be queried as usual if one is interested in knowing a particular VLAN's state without having to care about the VID to MSTI mapping (in this example VLAN 20 and 30 are bound to MSTI 100): $ bridge -d vlan port vlan-id vb1 10 state forwarding mcast_router 1 20 state disabled mcast_router 1 30 state disabled mcast_router 1 40 state forwarding mcast_router 1 vb2 10 state forwarding mcast_router 1 20 state forwarding mcast_router 1 30 state forwarding mcast_router 1 40 state forwarding mcast_router 1 Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18net: bridge: mst: Allow changing a VLAN's MSTITobias Waldekranz3-0/+58
Allow a VLAN to move out of the CST (MSTI 0), to an independent tree. The user manages the VID to MSTI mappings via a global VLAN setting. The proposed iproute2 interface would be: bridge vlan global set dev br0 vid <VID> msti <MSTI> Changing the state in non-zero MSTIs is still not supported, but will be addressed in upcoming changes. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>