summaryrefslogtreecommitdiff
path: root/net/bridge
AgeCommit message (Collapse)AuthorFilesLines
2011-06-25bridge: Only flood unregistered groups to routersHerbert Xu1-1/+4
The bridge currently floods packets to groups that we have never seen before to all ports. This is not required by RFC4541 and in fact it is not desirable in environment where traffic to unregistered group is always present. This patch changes the behaviour so that we only send traffic to unregistered groups to ports marked as routers. The user can always force flooding behaviour to any given port by marking it as a router. Note that this change does not apply to traffic to 224.0.0.X as traffic to those groups must always be flooded to all ports. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20netpoll: copy dev name of slaves to struct netpollWANG Cong1-0/+1
Otherwise we will not see the name of the slave dev in error message: [ 388.469446] (null): doesn't support polling, aborting. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-17IGMP snooping: set mrouters_only flag for IPv6 traffic properlyFernando Luis Vázquez Cao1-1/+1
Upon reception of a MGM report packet the kernel sets the mrouters_only flag in a skb that is a clone of the original skb, which means that the bridge loses track of MGM packets (cb buffers are tied to a specific skb and not shared) and it ends up forwading join requests to the bridge interface. This can cause unexpected membership timeouts and intermitent/permanent loss of connectivity as described in RFC 4541 [2.1.1. IGMP Forwarding Rules]: A snooping switch should forward IGMP Membership Reports only to those ports where multicast routers are attached. [...] Sending membership reports to other hosts can result, for IGMPv1 and IGMPv2, in unintentionally preventing a host from joining a specific multicast group. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-17IGMP snooping: set mrouters_only flag for IPv4 traffic properlyFernando Luis Vázquez Cao1-1/+1
Upon reception of a IGMP/IGMPv2 membership report the kernel sets the mrouters_only flag in a skb that may be a clone of the original skb, which means that sometimes the bridge loses track of membership report packets (cb buffers are tied to a specific skb and not shared) and it ends up forwading join requests to the bridge interface. This can cause unexpected membership timeouts and intermitent/permanent loss of connectivity as described in RFC 4541 [2.1.1. IGMP Forwarding Rules]: A snooping switch should forward IGMP Membership Reports only to those ports where multicast routers are attached. [...] Sending membership reports to other hosts can result, for IGMPv1 and IGMPv2, in unintentionally preventing a host from joining a specific multicast group. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Tested-by: Hayato Kakuta <kakuta.hayato@oss.ntt.co.jp> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-07bridge: provide a cow_metrics method for fake_opsAlexander Holler1-0/+6
Like in commit 0972ddb237 (provide cow_metrics() methods to blackhole dst_ops), we must provide a cow_metrics for bridges fake_dst_ops as well. This fixes a regression coming from commits 62fa8a846d7d (net: Implement read-only protection and COW'ing of metrics.) and 33eb9873a28 (bridge: initialize fake_rtable metrics) ip link set mybridge mtu 1234 --> [ 136.546243] Pid: 8415, comm: ip Tainted: P 2.6.39.1-00006-g40545b7 #103 ASUSTeK Computer Inc. V1Sn /V1Sn [ 136.546256] EIP: 0060:[<00000000>] EFLAGS: 00010202 CPU: 0 [ 136.546268] EIP is at 0x0 [ 136.546273] EAX: f14a389c EBX: 000005d4 ECX: f80d32c0 EDX: f80d1da1 [ 136.546279] ESI: f14a3000 EDI: f255bf10 EBP: f15c3b54 ESP: f15c3b48 [ 136.546285] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 136.546293] Process ip (pid: 8415, ti=f15c2000 task=f4741f80 task.ti=f15c2000) [ 136.546297] Stack: [ 136.546301] f80c658f f14a3000 ffffffed f15c3b64 c12cb9c8 f80d1b80 ffffffa1 f15c3bbc [ 136.546315] c12da347 c12d9c7d 00000000 f7670b00 00000000 f80d1b80 ffffffa6 f15c3be4 [ 136.546329] 00000004 f14a3000 f255bf20 00000008 f15c3bbc c11d6cae 00000000 00000000 [ 136.546343] Call Trace: [ 136.546359] [<f80c658f>] ? br_change_mtu+0x5f/0x80 [bridge] [ 136.546372] [<c12cb9c8>] dev_set_mtu+0x38/0x80 [ 136.546381] [<c12da347>] do_setlink+0x1a7/0x860 [ 136.546390] [<c12d9c7d>] ? rtnl_fill_ifinfo+0x9bd/0xc70 [ 136.546400] [<c11d6cae>] ? nla_parse+0x6e/0xb0 [ 136.546409] [<c12db931>] rtnl_newlink+0x361/0x510 [ 136.546420] [<c1023240>] ? vmalloc_sync_all+0x100/0x100 [ 136.546429] [<c1362762>] ? error_code+0x5a/0x60 [ 136.546438] [<c12db5d0>] ? rtnl_configure_link+0x80/0x80 [ 136.546446] [<c12db27a>] rtnetlink_rcv_msg+0xfa/0x210 [ 136.546454] [<c12db180>] ? __rtnl_unlock+0x20/0x20 [ 136.546463] [<c12ee0fe>] netlink_rcv_skb+0x8e/0xb0 [ 136.546471] [<c12daf1c>] rtnetlink_rcv+0x1c/0x30 [ 136.546479] [<c12edafa>] netlink_unicast+0x23a/0x280 [ 136.546487] [<c12ede6b>] netlink_sendmsg+0x26b/0x2f0 [ 136.546497] [<c12bb828>] sock_sendmsg+0xc8/0x100 [ 136.546508] [<c10adf61>] ? __alloc_pages_nodemask+0xe1/0x750 [ 136.546517] [<c11d0602>] ? _copy_from_user+0x42/0x60 [ 136.546525] [<c12c5e4c>] ? verify_iovec+0x4c/0xc0 [ 136.546534] [<c12bd805>] sys_sendmsg+0x1c5/0x200 [ 136.546542] [<c10c2150>] ? __do_fault+0x310/0x410 [ 136.546549] [<c10c2c46>] ? do_wp_page+0x1d6/0x6b0 [ 136.546557] [<c10c47d1>] ? handle_pte_fault+0xe1/0x720 [ 136.546565] [<c12bd1af>] ? sys_getsockname+0x7f/0x90 [ 136.546574] [<c10c4ec1>] ? handle_mm_fault+0xb1/0x180 [ 136.546582] [<c1023240>] ? vmalloc_sync_all+0x100/0x100 [ 136.546589] [<c10233b3>] ? do_page_fault+0x173/0x3d0 [ 136.546596] [<c12bd87b>] ? sys_recvmsg+0x3b/0x60 [ 136.546605] [<c12bdd83>] sys_socketcall+0x293/0x2d0 [ 136.546614] [<c13629d0>] sysenter_do_call+0x12/0x26 [ 136.546619] Code: Bad EIP value. [ 136.546627] EIP: [<00000000>] 0x0 SS:ESP 0068:f15c3b48 [ 136.546645] CR2: 0000000000000000 [ 136.546652] ---[ end trace 6909b560e78934fa ]--- Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-27Merge branch 'pablo/nf-2.6-updates' of git://1984.lsi.us.es/net-2.6David S. Miller1-2/+4
2011-05-26netfilter: Fix several warnings in compat_mtw_from_user().David Miller1-2/+4
Kill set but not used 'entry_offset'. Add a default case to the switch statement so the compiler can see that we always initialize off and size_kern before using them. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-05-24bridge: initialize fake_rtable metricsEric Dumazet1-1/+5
bridge netfilter code uses a fake_rtable, and we must init its _metric field or risk NULL dereference later. Ref: https://bugzilla.kernel.org/show_bug.cgi?id=35672 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-23net: remove synchronize_net() from netdev_set_master()Eric Dumazet1-0/+1
In the old days, we used to access dev->master in __netif_receive_skb() in a rcu_read_lock section. So one synchronize_net() call was needed in netdev_set_master() to make sure another cpu could not use old master while/after we release it. We now use netdev_rx_handler infrastructure and added one synchronize_net() call in bond_release()/bond_release_all() Remove the obsolete synchronize_net() from netdev_set_master() and add one in bridge del_nbp() after its netdev_rx_handler_unregister() call. This makes enslave -d a bit faster. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jiri Pirko <jpirko@redhat.com> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-23bridge: call NETDEV_JOIN notifiers when add a slaveAmerigo Wang1-0/+2
In the previous patch I added NETDEV_JOIN, now we can notify netconsole when adding a device to a bridge too. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-18Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/vmxnet3/vmxnet3_ethtool.c net/core/dev.c
2011-05-14bridge: fix forwarding of IPv6Stephen Hemminger1-1/+1
The commit 6b1e960fdbd75dcd9bcc3ba5ff8898ff1ad30b6e bridge: Reset IPCB when entering IP stack on NF_FORWARD broke forwarding of IPV6 packets in bridge because it would call bp_parse_ip_options with an IPV6 packet. Reported-by: Noah Meyerhans <noahm@debian.org> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11Merge branch 'master' of ↵David S. Miller1-53/+11
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-3.6 Conflicts: drivers/net/benet/be_main.c
2011-05-10netfilter: ebtables: only call xt_compat_add_offset once per ruleFlorian Westphal1-52/+9
The optimizations in commit 255d0dc34068a976 (netfilter: x_table: speedup compat operations) assume that xt_compat_add_offset is called once per rule. ebtables however called it for each match/target found in a rule. The match/watcher/target parser already returns the needed delta, so it is sufficient to move the xt_compat_add_offset call to a more reasonable location. While at it, also get rid of the unused COMPAT iterator macros. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-05-10netfilter: fix ebtables compat supportEric Dumazet1-1/+2
commit 255d0dc34068a976 (netfilter: x_table: speedup compat operations) made ebtables not working anymore. 1) xt_compat_calc_jump() is not an exact match lookup 2) compat_table_info() has a typo in xt_compat_init_offsets() call 3) compat_do_replace() misses a xt_compat_init_offsets() call Reported-by: dann frazier <dannf@dannf.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-05-03net: dont hold rtnl mutex during netlink dump callbacksEric Dumazet1-3/+4
Four years ago, Patrick made a change to hold rtnl mutex during netlink dump callbacks. I believe it was a wrong move. This slows down concurrent dumps, making good old /proc/net/ files faster than rtnetlink in some situations. This occurred to me because one "ip link show dev ..." was _very_ slow on a workload adding/removing network devices in background. All dump callbacks are able to use RCU locking now, so this patch does roughly a revert of commits : 1c2d670f366 : [RTNETLINK]: Hold rtnl_mutex during netlink dump callbacks 6313c1e0992 : [RTNETLINK]: Remove unnecessary locking in dump callbacks This let writers fight for rtnl mutex and readers going full speed. It also takes care of phonet : phonet_route_get() is now called from rcu read section. I renamed it to phonet_route_get_rcu() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Remi Denis-Courmont <remi.denis-courmont@nokia.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30ethtool: Use full 32 bit speed range in ethtool's set_settingsDavid Decotigny1-2/+2
This makes sure the ethtool's set_settings() callback of network drivers don't ignore the 16 most significant bits when ethtool calls their set_settings(). All drivers compiled with make allyesconfig on x86_64 have been updated. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29bridge: convert br_features_recompute() to ndo_fix_featuresMichał Mirosław4-67/+19
Note: netdev_update_features() needs only rtnl_lock as br->port_list is only changed while holding it. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Resolved logic conflicts causing a build failure due to drivers/net/r8169.c changes using a patch from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22inet: constify ip headers and in6_addrEric Dumazet2-8/+8
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22Revert "bridge: Forward reserved group addresses if !STP"David S. Miller1-1/+1
This reverts commit 1e253c3b8a1aeed51eef6fc366812f219b97de65. It breaks 802.3ad bonding inside of a bridge. The commit was meant to support transport bridging, and specifically virtual machines bridged to an ethernet interface connected to a switch port wiht 802.1x enabled. But this isn't the way to do it, it breaks too many other things. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19Merge branch 'master' of ↵David S. Miller1-4/+2
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x_ethtool.c
2011-04-18bridge: fix accidental creation of sysfs directoryStephen Hemminger1-1/+1
Commit bb900b27a2f49b37bc38c08e656ea13048fee13b ("bridge: allow creating bridge devices with netlink") introduced a bug in net-next because of a typo in notifier. Every device would have the sysfs bridge directory (and files). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13bridge: reset IPCB in br_parse_ip_optionsEric Dumazet1-4/+2
Commit 462fb2af9788a82 (bridge : Sanitize skb before it enters the IP stack), missed one IPCB init before calling ip_options_compile() Thanks to Scot Doyle for his tests and bug reports. Reported-by: Scot Doyle <lkml@scotdoyle.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Acked-by: Bandan Das <bandan.das@stratus.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Cc: Jan Lübbe <jluebbe@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12Merge branch 'master' of ↵David S. Miller2-2/+2
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/smsc911x.c
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds2-2/+2
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-05bridge: range check STP parametersstephen hemminger7-93/+107
Apply restrictions on STP parameters based 802.1D 1998 standard. * Fixes missing locking in set path cost ioctl * Uses common code for both ioctl and sysfs This is based on an earlier patch Sasikanth V but with overhaul. Note: 1. It does NOT enforce the restriction on the relationship max_age and forward delay or hello time because in existing implementation these are set as independant operations. 2. If STP is disabled, there is no restriction on forward delay 3. No restriction on holding time because users use Linux code to act as hub or be sticky. 4. Although standard allow 0-255, Linux only allows 0-63 for port priority because more bits are reserved for port number. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-05bridge: allow creating bridge devices with netlinkstephen hemminger5-87/+101
Add netlink device ops to allow creating bridge device via netlink. This works in a manner similar to vlan, macvlan and bonding. Example: # ip link add link dev br0 type bridge # ip link del dev br0 The change required rearranging initializtion code to deal with being called by create link. Most of the initialization happens in br_dev_setup, but allocation of stats is done in ndo_init callback to deal with allocation failure. Sysfs setup has to wait until after the network device kobject is registered. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-05bridge: allow creating/deleting fdb entries via netlinkstephen hemminger3-0/+144
Use RTM_NEWNEIGH and RTM_DELNEIGH to allow updating of entries in bridge forwarding table. This allows manipulating static entries which is not possible with existing tools. Example (using bridge extensions to iproute2) # br fdb add 00:02:03:04:05:06 dev eth0 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-05bridge: add netlink notification on forward entry changesstephen hemminger3-0/+127
This allows applications to query and monitor bridge forwarding table in the same method used for neighbor table. The forward table entries are returned in same structure format as used by the ioctl. If more information is desired in future, the netlink method is extensible. Example (using bridge extensions to iproute2) # br monitor Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-05bridge: split rcu and no-rcu cases of fdb lookupstephen hemminger1-3/+16
In some cases, look up of forward database entry is done with RCU; and for others no RCU is needed because of locking. Split the two cases into two differnt loops (and take off inline). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-05bridge: track last used time in forwarding tablestephen hemminger3-8/+10
Adds tracking the last used time in forwarding table. Rename ageing_timer to updated to better describe it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-05bridge: change arguments to fdb_createstephen hemminger1-8/+10
Later patch provides ability to create non-local static entry. To make this easier move the updating of the flag values to after the code that creates entry. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi2-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30bridge: mcast snooping, fix length check of snooped MLDv1/2Linus Lüssing1-1/+1
"len = ntohs(ip6h->payload_len)" does not include the length of the ipv6 header itself, which the rest of this function assumes, though. This leads to a length check less restrictive as it should be in the following line for one thing. For another, it very likely leads to an integer underrun when substracting the offset and therefore to a very high new value of 'len' due to its unsignedness. This will ultimately lead to the pskb_trim_rcsum() practically never being called, even in the cases where it should. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30bridge: Fix compilation warning in function br_stp_recalculate_bridge_id()Balaji G1-1/+1
net/bridge/br_stp_if.c: In function ‘br_stp_recalculate_bridge_id’: net/bridge/br_stp_if.c:216:3: warning: ‘return’ with no value, in function returning non-void Signed-off-by: G.Balaji <balajig81@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-28bridge: notify applications if address of bridge device changesstephen hemminger3-5/+12
The mac address of the bridge device may be changed when a new interface is added to the bridge. If this happens, then the bridge needs to call the network notifiers to tickle any other systems that care. Since bridge can be a module, this also means exporting the notifier function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23bridge: Fix possibly wrong MLD queries' ethernet source addressLinus Lüssing1-1/+1
The ipv6_dev_get_saddr() is currently called with an uninitialized destination address. Although in tests it usually seemed to nevertheless always fetch the right source address, there seems to be a possible race condition. Therefore this commit changes this, first setting the destination address and only after that fetching the source address. Reported-by: Jan Beulich <JBeulich@novell.com> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-19bridge: Reset IPCB when entering IP stack on NF_FORWARDHerbert Xu1-0/+3
Whenever we enter the IP stack proper from bridge netfilter we need to ensure that the skb is in a form the IP stack expects it to be in. The entry point on NF_FORWARD did not meet the requirements of the IP stack, therefore leading to potential crashes/panics. This patch fixes the problem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16net: introduce rx_handler results and logic around thatJiri Pirko2-11/+16
This patch allows rx_handlers to better signalize what to do next to it's caller. That makes skb->deliver_no_wcard no longer needed. kernel-doc for rx_handler_result is taken from Nicolas' patch. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16Merge branch 'master' of ↵David S. Miller1-2/+2
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-03-15bridge: skip forwarding delay if not using STPstephen hemminger1-2/+2
If Spanning Tree Protocol is not enabled, there is no good reason for the bridge code to wait for the forwarding delay period before enabling the link. The purpose of the forwarding delay is to allow STP to learn about other bridges before nominating itself. The only possible impact is that when starting up a new port the bridge may flood a packet now, where previously it might have seen traffic from the other host and preseeded the forwarding table. Includes change for local variable br already available in that func. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-15bridge: control carrier based on ports onlinestephen hemminger3-13/+27
This makes the bridge device behave like a physical device. In earlier releases the bridge always asserted carrier. This changes the behavior so that bridge device carrier is on only if one or more ports are in the forwarding state. This should help IPv6 autoconfiguration, DHCP, and routing daemons. I did brief testing with Network and Virt manager and they seem fine, but since this changes behavior of bridge, it should wait until net-next (2.6.39). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Tested-By: Adam Majer <adamm@zombino.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13ipv4: Create and use route lookup helpers.David S. Miller1-5/+2
The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-11Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x_cmn.c
2011-03-11net: bridge builtin vs. ipv6 modularRandy Dunlap1-0/+1
When configs BRIDGE=y and IPV6=m, this build error occurs: br_multicast.c:(.text+0xa3341): undefined reference to `ipv6_dev_get_saddr' BRIDGE_IGMP_SNOOPING is boolean; if it were tristate, then adding depends on IPV6 || IPV6=n to BRIDGE_IGMP_SNOOPING would be a good fix. As it is currently, making BRIDGE depend on the IPV6 config works. Reported-by: Patrick Schaaf <netdev@bof.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-04Merge branch 'master' of ↵David S. Miller1-11/+12
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h
2011-03-03ipv4: Make output route lookup return rtable directly.David S. Miller1-4/+5
Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02Merge branch 'master' of ↵David S. Miller1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2011-02-22bridge: Use IPv6 link-local address for multicast listener queriesLinus Lüssing1-1/+2
Currently the bridge multicast snooping feature periodically issues IPv6 general multicast listener queries to sense the absence of a listener. For this, it uses :: as its source address - however RFC 2710 requires: "To be valid, the Query message MUST come from a link-local IPv6 Source Address". Current Linux kernel versions seem to follow this requirement and ignore our bogus MLD queries. With this commit a link local address from the bridge interface is being used to issue the MLD query, resulting in other Linux devices which are multicast listeners in the network to respond with a MLD response (which was not the case before). Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-17 03:07:10 +0300