summaryrefslogtreecommitdiff
path: root/net/batman-adv/originator.c
AgeCommit message (Collapse)AuthorFilesLines
2014-01-12batman-adv: update copyright years for 2014Simon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: add debugfs support to view multiif tablesSimon Wunderlich1-1/+47
Show tables for the multi interface operation. Originator tables are added per hard interface. This patch also changes the API by adding the interface to the bat_orig_print() parameters. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: add bonding againSimon Wunderlich1-0/+4
With the new interface alternating, the first hop may send packets in a round robin fashion to it's neighbors because it has multiple valid routes built by the multi interface optimization. This patch enables the feature if bonding is selected. Note that unlike the bonding implemented before, this version is much simpler and may even enable multi path routing to a certain degree. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: split out router from orig_nodeSimon Wunderlich1-8/+234
For the network wide multi interface optimization there are different routers for each outgoing interface (outgoing from the OGM perspective, incoming for payload traffic). To reflect this, change the router and associated data to a list of routers. While at it, rename batadv_orig_node_get_router() to batadv_orig_router_get() to follow the new naming scheme. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: split tq information in neigh_node structSimon Wunderlich1-19/+210
For the network wide multi interface optimization it is required to save metrics per outgoing interface in one neighbor. Therefore a new type is introduced to keep interface-specific information. This also requires some changes in access and list management. The compare and equiv_or_better API calls are changed to take the outgoing interface into consideration. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: remove bonding and interface alternatingSimon Wunderlich1-14/+1
Remove bonding and interface alternating code - it will be replaced by a new, network-wide multi interface optimization which enables both bonding and interface alternating in a better way. Keep the sysfs and find router function though, this will be needed later. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-08batman-adv: remove FSF address from GPL disclaimerAntonio Quartulli1-3/+1
As suggested by checkpatch, remove all the references to the FSF address since the kernel already has one reference in its documentation. In this way it is easier to update it in case of future changes. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-26batman-adv: use batadv_compare_eth for concisedingtianhong1-1/+1
It is better to use batadv_compate_eth instead of memcpy for concise style. Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <antonio@meshcoding.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23batman-adv: provide orig_node routing APIAntonio Quartulli1-88/+14
Some operations executed on an orig_node depends on the current routing algorithm being used. To easily make this mechanism routing algorithm agnostic add a orig_node specific API that each algorithm can populate with its own routines. Such routines are then invoked by the code when needed, without knowing which routing algorithm is currently in use With this patch 3 API functions are added: - orig_free (to free routing depending internal structs) - orig_add_if (to change the inner state of an orig_node when a new hard interface is added) - orig_del_if (to change the inner state of an orig_node when an hard interface is removed) Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: adapt the neighbor purging routine to use the new API functionsAntonio Quartulli1-8/+9
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: add bat_orig_print API functionAntonio Quartulli1-56/+10
Each routing protocol has its own metric and private variables, therefore it is useful to introduce a new API for originator information printing. This API needs to be implemented by each protocol in order to provide its specific originator table output. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: make struct batadv_orig_node algorithm agnosticAntonio Quartulli1-56/+33
some of the struct batadv_orig_node members are B.A.T.M.A.N. IV specific and therefore they are moved in a algorithm specific substruct in order to make batadv_orig_node routing algorithm agnostic Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: make struct batadv_neigh_node algorithm agnosticAntonio Quartulli1-11/+22
some of the fields in struct batadv_neigh_node are strictly related to the B.A.T.M.A.N. IV algorithm. In order to make the struct usable by any routing algorithm it has to be split and made more generic Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-20batman-adv: make the TT global purge routine VLAN specificAntonio Quartulli1-1/+1
Instead of unconditionally removing all the TT entries served by a given originator, make tt_global_orig_del() remove only entries matching a given VLAN identifier provided as argument. If such argument is negative all the global entries served by the originator are removed. This change is used into the BLA code to purge entries served by a newly discovered Backbone node, but limiting the operation only to those connected to the VLAN where the backbone has been discovered. Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-20batman-adv: make the TT CRC logic VLAN specificAntonio Quartulli1-3/+98
This change allows nodes to handle the TT table on a per-VLAN basis. This is needed because nodes may have to store only some of the global entries advertised by another node. In this scenario such nodes would re-create only a partial global table and would not be able to compute a correct CRC anymore. This patch splits the logic and introduces one CRC per VLAN. In this way a node fetching only some entries belonging to some VLANs is still able to compute the needed CRCs and still check the table correctness. With this patch the shape of the TVLV-TT is changed too because now a node needs to advertise all the CRCs of all the VLANs that it is wired to. The debug output of the local Translation Table now shows the CRC along with each entry since there is not a common value for the entire table anymore. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19batman-adv: lock around TT operations to avoid sending inconsistent dataAntonio Quartulli1-0/+1
A TT response may be prepared and sent while the local or global translation table is getting updated. The worst case is when one of the tables is accessed after its content has been recently updated but the metadata (TTVN/CRC) has not yet. In this case the reader will get a table content which does not match the TTVN/CRC. This will lead to an inconsistent state and so to a TT recovery. To avoid entering this situation, put a lock around those TT operations recomputing the metadata and around the TT Response creation (the latter is the only reader that accesses the metadata together with the table). Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12batman-adv: Receive fragmented packets and mergeMartin Hundebøll1-1/+13
Fragments arriving at their destination are buffered for later merge. Merged packets are passed to the main receive function as had they never been fragmented. Fragments are forwarded without merging if the MTU of the outgoing interface is smaller than the size of the merged packet. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12batman-adv: Remove old fragmentation codeMartin Hundebøll1-9/+0
Remove the existing fragmentation code before adding the new version and delete unicast.{h,c}. batadv_unicast_send_skb() is moved to send.c and renamed to batadv_send_skb_unicast(). fragmentation entry in sysfs (bat_priv->fragmentation) is kept for use in the new fragmentation code. BATADV_UNICAST_FRAG packet type is renamed to BATADV_FRAG for use in the new fragmentation code. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: tvlv - gateway download/upload bandwidth containerMarek Lindner1-3/+1
Prior to this patch batman-adv read the advertised uplink bandwidth from userspace and compressed this information into a single byte called "gateway class". Now the download & upload bandwidth information is sent as-is. No userspace change is necessary since the sysfs API always allowed to specify a bandwidth. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Spyros Gasteratos <morfeas3000@gmail.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-05-29batman-adv: slightly improve neighbor creation debug messageAntonio Quartulli1-1/+2
print the interface along with the new neighbor mac address Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: drop useless argument seqno in neighbor creationAntonio Quartulli1-3/+2
the sequence number is not stored in struct neigh_node, therefore there is no need to pass such value to the neigh_node creation procedure. At the moment the value is only used by a debug message, but given the fact that the seqno is not related to the neighbor object, it is better to print it elsewhere. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-17batman-adv: Fix rcu_barrier() miss due to double call_rcu() in TT codeLinus Lüssing1-0/+16
rcu_barrier() only waits for the currently scheduled rcu functions to finish - it won't wait for any function scheduled via another call_rcu() within an rcu scheduled function. Unfortunately our batadv_tt_orig_list_entry_free_ref() does just that, via a batadv_orig_node_free_ref() call, leading to our rcu_barrier() call potentially missing such a batadv_orig_node_free_ref(). This patch fixes this issue by calling the batadv_orig_node_free_rcu() directly from the rcu callback, removing the unnecessary, additional call_rcu() layer here. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: use seq_puts instead of seq_printf when the format is constantAntonio Quartulli1-2/+2
As reported by checkpatch, seq_puts has to be preferred with respect to seq_printf when the format is a constant string (no va_args) Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-03-14batman-adv: network coding - detect coding nodes and remove these after timeoutMartin Hundebøll1-0/+6
To use network coding efficiently, a relay must know when neighbor nodes are likely to have enough information to be able to decode a network coded packet. This is detected by using OGMs from batman-adv to discover when one neighbor is in range of another neighbor. The relay check the TLL to detect when an OGM is forwarded from one neighbor by another neighbor, and thereby knows that the two neighbors are in range and thus overhear packets sent by each other. This information is saved in the orig_node struct to be used when searching for coding opportunities. Two lists are added to the orig_node struct: One for neighbors that can hear the orig_node (outgoing nc_nodes) and one for neighbors that the orig_node can hear (incoming nc_nodes). Information about nc_nodes is kept for 10 seconds and is available through debugfs in batman_adv/nc_nodes to use when debugging network coding. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-28hlist: drop the node parameter from iteratorsSasha Levin1-17/+14
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-19batman-adv: update copyright yearsAntonio Quartulli1-1/+1
Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-19batman-adv: a delayed_work has to be initialised onceAntonio Quartulli1-9/+8
A delayed_work struct does not need to be initialized each every time before being enqueued. Therefore the INIT_DELAYED_WORK() macro should be used during the initialization process only. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12batman-adv: remove useless blank lines before and after bracketsAntonio Quartulli1-3/+0
Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12batman-adv: Initialize lockdep class keys for hashesAntonio Quartulli1-0/+6
Different hashes have the same class key because they get initialised with the same one. For this reason lockdep can create false warning when they are used recursively. Re-initialise the key for each hash after the invocation to hash_new() to avoid this problem. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Tested-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-15batman-adv: substitute tt_poss_change with a per-tt_entry flagAntonio Quartulli1-1/+0
tt_poss_change is a node-wide flag which tells whether the node is in a roaming state (a client recently moved to/away from it) in order to let it apply special re-routing rules. However this flag does not give a clear idea of the current state because it is not possible to understand *which client* is actually involved in the roaming. For this reason a better approach has been chosen: instead of using a node-wide variable, the roaming state is now given by a per-tt_entry ROAM flag which, in case of packet coming through the node, tells the node whether the real destination is in roaming state or not. With this flag change, batadv_check_unicast_ttvn() has also been rearranged in order to better fit the new re-routing logic and to be much more readable. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Distributed ARP Table - create DHT helper functionsAntonio Quartulli1-0/+2
Add all the relevant functions in order to manage a Distributed Hash Table over the B.A.T.M.A.N.-adv network. It will later be used to store several ARP entries and implement DAT (Distributed ARP Table) Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29batman-adv: consolidate duplicated primary_if checking codeMarek Lindner1-16/+3
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-02batman-adv: Fix alignment after opened parenthesesSven Eckelmann1-4/+5
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-02batman-adv: Prefix types structs with batadv_Sven Eckelmann1-48/+54
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-02batman-adv: Prefix hash struct and typedef with batadv_Sven Eckelmann1-5/+5
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-02batman-adv: Prefix main enum with BATADV_Sven Eckelmann1-6/+6
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-02batman-adv: Prefix hard-interface enum with BATADV_Sven Eckelmann1-8/+8
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-28batman-adv: Prefix main defines with BATADV_Sven Eckelmann1-15/+17
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-28batman-adv: Prefix unicast defines with BATADV_Sven Eckelmann1-1/+1
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-25batman-adv: Prefix originator local static functions with batadv_Sven Eckelmann1-27/+27
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-25batman-adv: Prefix main static inline functions with batadv_Sven Eckelmann1-33/+32
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-24batman-adv: Prefix originator static inline functions with batadv_Sven Eckelmann1-2/+2
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-24batman-adv: Prefix hash static inline functions with batadv_Sven Eckelmann1-2/+3
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-24batman-adv: Prefix hard-interface static inline functions with batadv_Sven Eckelmann1-2/+2
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-21batman-adv: Reformat multiline comments to consistent styleSven Eckelmann1-6/+7
batman-adv doesn't follow the style for multiline comments that David S. Miller prefers. All comments should be reformatted to follow this consistent style to make the code slightly more readable. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-21batman-adv: Prefix main non-static functions with batadv_Sven Eckelmann1-2/+2
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-21batman-adv: Prefix unicast non-static functions with batadv_Sven Eckelmann1-2/+2
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-21batman-adv: Prefix translation-table non-static functions with batadv_Sven Eckelmann1-2/+2
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-21batman-adv: Prefix routing non-static functions with batadv_Sven Eckelmann1-2/+3
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-21batman-adv: Prefix originator non-static functions with batadv_Sven Eckelmann1-17/+18
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 16:20:48 +0300