summaryrefslogtreecommitdiff
path: root/net/atm/br2684.c
AgeCommit message (Collapse)AuthorFilesLines
2012-12-02br2684: allow assign only on a connected socketKrzysztof Mazur1-2/+5
The br2684 does not check if used vcc is in connected state, causing potential Oops in pppoatm_send() when vcc->send() is called on not fully connected socket. Now br2684 can be assigned only on connected sockets; otherwise -EINVAL error is returned. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-12-02br2684: fix module_put() raceDavid Woodhouse1-1/+4
The br2684 code used module_put() during unassignment from vcc with hope that we have BKL. This assumption is no longer true. Now owner field in atmvcc is used to move this module_put() to vcc_destroy_socket(). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Krzysztof Mazur <krzysiek@podlesie.net>
2012-12-02br2684: don't send frames on not-ready vccDavid Woodhouse1-3/+40
Avoid submitting packets to a vcc which is being closed. Things go badly wrong when the ->pop method gets later called after everything's been torn down. Use the ATM socket lock for synchronisation with vcc_destroy_socket(), which clears the ATM_VF_READY bit under the same lock. Otherwise, we could end up submitting a packet to the device driver even after its ->ops->close method has been called. And it could call the vcc's ->pop method after the protocol has been shut down. Which leads to a panic. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Krzysztof Mazur <krzysiek@podlesie.net>
2012-11-27atm: br2684: Fix excessive queue bloatDavid Woodhouse1-14/+22
There's really no excuse for an additional wmem_default of buffering between the netdev queue and the ATM device. Two packets (one in-flight, and one ready to send) ought to be fine. It's not as if it should take long to get another from the netdev queue when we need it. If necessary we can make the queue space configurable later, but I don't think it's likely to be necessary. cf. commit 9d02daf754238adac48fa075ee79e7edd3d79ed3 (pppoatm: Fix excessive queue bloat) which did something very similar for PPPoATM. Note that there is a tremendously unlikely race condition which may result in qspace temporarily going negative. If a CPU running the br2684_pop() function goes off into the weeds for a long period of time after incrementing qspace to 1, but before calling netdev_wake_queue()... and another CPU ends up calling br2684_start_xmit() and *stopping* the queue again before the first CPU comes back, the netdev queue could end up being woken when qspace has already reached zero. An alternative approach to coping with this race would be to check in br2684_start_xmit() for qspace==0 and return NETDEV_TX_BUSY, but just using '> 0' and '< 1' for comparison instead of '== 0' and '!= 0' is simpler. It just warranted a mention of *why* we do it that way... Move the call to atmvcc->send() to happen *after* the accounting and potentially stopping the netdev queue, in br2684_xmit_vcc(). This matters if the ->send() call suffers an immediate failure, because it'll call br2684_pop() with the offending skb before returning. We want that to happen *after* we've done the initial accounting for the packet in question. Also make it return an appropriate success/failure indication while we're at it. Tested by running 'ping -l 1000 bottomless.aaisp.net.uk' from within my network, with only a single PPPoE-over-BR2684 link running. And after setting txqueuelen on the nas0 interface to something low (5, in fact). Before the patch, we'd see about 15 packets being queued and a resulting latency of ~56ms being reached. After the patch, we see only about 8, which is fairly much what we expect. And a max latency of ~36ms. On this OpenWRT box, wmem_default is 163840. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Reviewed-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15net: cleanup unsigned to unsigned intEric Dumazet1-1/+1
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29atm: br2684: Avoid alignment issuesPascal Hambourg1-1/+2
Use memcmp() instead of cast to u16 when checking the PAD field. Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29atm: br2684: Make headroom and hard_header_len depend on the payload typePascal Hambourg1-2/+6
Routed payload requires less headroom than bridged payload. So do not reallocate headroom if not needed. Also, add worst case AAL5 overhead to netdev->hard_header_len. Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23atm: Introduce vcc_process_recv_queueJorge Boncompte [DTI2]1-15/+5
This function moves the implementation found in the clip and br2684 modules to common code, correctly unlinks the skb from the queue before pushing it and makes pppoatm use it. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23atm: br2684: Do not move counters backwardsJorge Boncompte [DTI2]1-8/+1
This snippet has caused several bugs in the past, and I don't see the point on substracting the skb len from netdev stats. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-21atm: br2684: Fix oops due to skb->dev being NULLDaniel Schwierzeck1-3/+4
This oops have been already fixed with commit 27141666b69f535a4d63d7bc6d9e84ee5032f82a atm: [br2684] Fix oops due to skb->dev being NULL It happens that if a packet arrives in a VC between the call to open it on the hardware and the call to change the backend to br2684, br2684_regvcc processes the packet and oopses dereferencing skb->dev because it is NULL before the call to br2684_push(). but have been introduced again with commit b6211ae7f2e56837c6a4849316396d1535606e90 atm: Use SKB queue and list helpers instead of doing it by-hand. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-02atm: br2864: sent packets truncated in VC routed modeChas Williams1-2/+0
Reported-by: Pascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-11-17net/atm: Remove unnecessary casts of netdev_privJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27br2684: fix scheduling while atomicKarl Hiramoto1-10/+2
You can't call atomic_notifier_chain_unregister() while in atomic context. Fix, call un/register_atmdevice_notifier in module __init and __exit. Bug report: http://comments.gmane.org/gmane.linux.network/172603 Reported-by: Mikko Vinni <mmvinni@yahoo.com> Tested-by: Mikko Vinni <mmvinni@yahoo.com> Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm/br2684: register notifier event for carrier signal changes.Karl Hiramoto1-2/+64
When a signal change event occurs call netif_carrier_on/off. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18net: Remove unnecessary returns from void function()sJoe Perches1-1/+0
This patch removes from net/ (but not any netfilter files) all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-01-27net/atm/br2684.c: checkpatch cleanupsJoe Perches1-41/+31
Convert #include <asm... to #include <linux... Use print_hex_dump Spacing cleanups Move logical continuation tests to end of previous line 80 column wrapping Move goto branch label to column 1 Remove unnecessary single statement braces Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-27net/atm: Convert printk to pr_<level>Joe Perches1-9/+9
Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-09atm: [br2684] allow routed mode operation againchas williams - CONTRACTOR1-3/+8
in routed mode, we don't have a hardware address so netdev_ops doesnt need to validate our hardware address via .ndo_validate_addr Reported-by: Manuel Fuentes <mfuentes@agenciaefe.com> Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03atm/br2684: netif_stop_queue() when atm device busy and netif_wake_queue() ↵Karl Hiramoto1-10/+27
when we can send packets again. This patch removes the call to dev_kfree_skb() when the atm device is busy. Calling dev_kfree_skb() causes heavy packet loss then the device is under heavy load, the more correct behavior should be to stop the upper layers, then when the lower device can queue packets again wake the upper layers. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01convert ATM drivers to netdev_tx_tStephen Hemminger1-1/+2
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy1-2/+2
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03net: skb->dst accessorsEric Dumazet1-1/+1
Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29atm: Use SKB queue and list helpers instead of doing it by-hand.David S. Miller1-17/+9
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-03Subject: [PATCH] br2684: restore net_dev initializationRabin Vincent1-0/+1
Commit 0ba25ff4c669e5395110ba6ab4958a97a9f96922 ("br2684: convert to net_device_ops") inadvertently deleted the initialization of the net_dev pointer in the br2684_dev structure, leading to crashes. This patch adds it back. Reported-by: Mikko Vinni <mmvinni@yahoo.com> Tested-by: Mikko Vinni <mmvinni@yahoo.com> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22br2684: convert to net_device_opsStephen Hemminger1-9/+11
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22atm: br2684 internal statsStephen Hemminger1-23/+15
Now that stats are in net_device, use them. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13netdevice: safe convert to netdev_priv() #part-4Wang Chen1-1/+1
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28net: convert print_mac to %pMJohannes Berg1-3/+2
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21net: Use hton[sl]() instead of __constant_hton[sl]() where applicableArnaldo Carvalho de Melo1-4/+4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-18atm: use const where reasonableMitchell Blank Jr1-7/+7
From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17atm: [br2864] fix routed vcmux supportEric Kinzie1-32/+44
From: Eric Kinzie <ekinzie@cmf.nrl.navy.mil> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17atm: [br2684] Fix oops due to skb->dev being NULLJorge Boncompte [DTI2]1-1/+1
It happens that if a packet arrives in a VC between the call to open it on the hardware and the call to change the backend to br2684, br2684_regvcc processes the packet and oopses dereferencing skb->dev because it is NULL before the call to br2684_push(). Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
2008-05-06Revert "atm: Do not free already unregistered net device."David S. Miller1-0/+2
This reverts commit 65e4113684e50cee75357ce10dc9026b0929e4e9. Unlike the other cases Pavel fixed, this case did not setup a netdev->destructor of free_netdev, therefore this change was not correct. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05atm: Bad locking on br2684_devs modifications.Pavel Emelyanov1-2/+2
The list_del happens under read-locked devs_lock. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05atm: Do not free already unregistered net device.Pavel Emelyanov1-2/+0
Both br2684_push and br2684_exit do so, but unregister_netdev() releases the device itself. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[ATM]: Use proc_create() to setup ->proc_fops firstWang Chen1-2/+2
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-29[ATM]: Suppress some sparse warningsEric Dumazet1-0/+2
CHECK net/atm/br2684.c net/atm/br2684.c:665:13: warning: context imbalance in 'br2684_seq_start' - wrong count at exit net/atm/br2684.c:676:13: warning: context imbalance in 'br2684_seq_stop' - unexpected unlock CHECK net/atm/lec.c net/atm/lec.c:196:23: warning: expensive signed divide CHECK net/atm/proc.c net/atm/proc.c:151:14: warning: context imbalance in 'vcc_seq_start' - wrong count at exit net/atm/proc.c:154:13: warning: context imbalance in 'vcc_seq_stop' - unexpected unlock Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-29[ATM]: [br2864] whitespace cleanupChas Williams1-108/+114
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-29[ATM]: [br2864] routed supportEric Kinzie1-32/+116
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-18[BR2684]: get rid of broken header code.Stephen Hemminger1-121/+0
Recent header_ops change would break the following dead code in br2684. Maintaining conditonal code in mainline is wrong. "Do, or do not. There is no 'try.'" Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches1-10/+6
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[ATM]: Replace DPRINTK() with pr_debug().Stephen Hemminger1-17/+11
Get rid of using DPRINTK macro in ATM and use pr_debug (in kernel.h). Using the standard macro is cleaner and forces code to check for bad arguments and formatting. Fixes from Thomas Graf. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18[ATM]: Eliminate dead config variable CONFIG_BR2684_FAST_TRANS.Robert P. J. Day1-4/+0
Signed-off-by: chas williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[NET]: Make all initialized struct seq_operations const.Philippe De Muyter1-1/+1
Make all initialized struct seq_operations in net/ const Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[ATM] br2684: Use seq_list_xxx helpersPavel Emelianov1-18/+4
The .show callback receives the list_head pointer now, not the struct br2684_dev one. Signed-off-by: Pavel Emelianov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}Arnaldo Carvalho de Melo1-1/+1
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-26[SK_BUFF]: Introduce skb_set_mac_header()Arnaldo Carvalho de Melo1-1/+1
For the cases where we want to set skb->mac.raw to an offset from skb->data. Simple cases first, the memmove ones and specially pktgen will be left for later. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[SK_BUFF]: Introduce skb_reset_mac_header(skb)Arnaldo Carvalho de Melo1-1/+1
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 22:07:15 +0300