| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
The HK_TYPE_DOMAIN housekeeping cpumask is now modifiable at runtime.
In order to synchronize against vmstat workqueue to make sure
that no asynchronous vmstat work is still pending or executing on a
newly made isolated CPU, the housekeeping susbsystem must flush the
vmstat workqueues.
This involves flushing the whole mm_percpu_wq workqueue, shared with
LRU drain, introducing here a welcome side effect.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-mm@kvack.org
|
|
The HK_TYPE_DOMAIN housekeeping cpumask will soon be made modifiable at
runtime. In order to synchronize against vmstat workqueue to make sure
that no asynchronous vmstat work is pending or executing on a newly made
isolated CPU, target and queue a vmstat work under the same RCU read
side critical section.
Whenever housekeeping will update the HK_TYPE_DOMAIN cpumask, a vmstat
workqueue flush will also be issued in a further change to make sure
that no work remains pending after a CPU has been made isolated.
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-mm@kvack.org
|
|
This continues the effort to refactor workqueue APIs, which began with the
introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn't explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
[akpm@linux-foundation.org: fix mm/slub.c]
[akpm@linux-foundation.org: fix kmem_cache_init_late() properly, per Sebastian]
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Link: https://lkml.kernel.org/r/20260113114630.152942-4-marco.crivellari@suse.com
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lai jiangshan <jiangshanlai@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Marco Elver <elver@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, kswapd_failures is reset in multiple places (kswapd, direct
reclaim, PCP freeing, memory-tiers), but there's no way to trace when and
why it was reset, making it difficult to debug memory reclaim issues.
This patch:
1. Introduce kswapd_clear_hopeless() as a wrapper function to
centralize kswapd_failures reset logic.
2. Introduce kswapd_test_hopeless() to encapsulate hopeless node
checks, replacing all open-coded kswapd_failures comparisons.
3. Add kswapd_clear_hopeless_reason enum to distinguish reset sources:
- KSWAPD_CLEAR_HOPELESS_KSWAPD: reset from kswapd context
- KSWAPD_CLEAR_HOPELESS_DIRECT: reset from direct reclaim
- KSWAPD_CLEAR_HOPELESS_PCP: reset from PCP page freeing
- KSWAPD_CLEAR_HOPELESS_OTHER: reset from other paths
4. Add tracepoints for better observability:
- mm_vmscan_kswapd_clear_hopeless: traces each reset with reason
- mm_vmscan_kswapd_reclaim_fail: traces each kswapd reclaim failure
Test results:
$ trace-cmd record -e vmscan:mm_vmscan_kswapd_clear_hopeless -e vmscan:mm_vmscan_kswapd_reclaim_fail
$ # generate memory pressure
$ trace-cmd report
cpus=4
kswapd0-71 [000] 27.216563: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=1
kswapd0-71 [000] 27.217169: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=2
kswapd0-71 [000] 27.217764: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=3
kswapd0-71 [000] 27.218353: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=4
kswapd0-71 [000] 27.218993: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=5
kswapd0-71 [000] 27.219744: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=6
kswapd0-71 [000] 27.220488: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=7
kswapd0-71 [000] 27.221206: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=8
kswapd0-71 [000] 27.221806: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=9
kswapd0-71 [000] 27.222634: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=10
kswapd0-71 [000] 27.223286: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=11
kswapd0-71 [000] 27.223894: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=12
kswapd0-71 [000] 27.224712: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=13
kswapd0-71 [000] 27.225424: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=14
kswapd0-71 [000] 27.226082: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=15
kswapd0-71 [000] 27.226810: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=16
kswapd1-72 [002] 27.386869: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=1
kswapd1-72 [002] 27.387435: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=2
kswapd1-72 [002] 27.388016: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=3
kswapd1-72 [002] 27.388586: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=4
kswapd1-72 [002] 27.389155: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=5
kswapd1-72 [002] 27.389723: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=6
kswapd1-72 [002] 27.390292: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=7
kswapd1-72 [002] 27.392364: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=8
kswapd1-72 [002] 27.392934: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=9
kswapd1-72 [002] 27.393504: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=10
kswapd1-72 [002] 27.394073: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=11
kswapd1-72 [002] 27.394899: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=12
kswapd1-72 [002] 27.395472: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=13
kswapd1-72 [002] 27.396055: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=14
kswapd1-72 [002] 27.396628: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=15
kswapd1-72 [002] 27.397199: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=16
kworker/u18:0-40 [002] 27.410151: mm_vmscan_kswapd_clear_hopeless: nid=0 reason=DIRECT
kswapd0-71 [000] 27.439454: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=1
kswapd0-71 [000] 27.440048: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=2
kswapd0-71 [000] 27.440634: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=3
kswapd0-71 [000] 27.441211: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=4
kswapd0-71 [000] 27.441787: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=5
kswapd0-71 [000] 27.442363: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=6
kswapd0-71 [000] 27.443030: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=7
kswapd0-71 [000] 27.443725: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=8
kswapd0-71 [000] 27.444315: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=9
kswapd0-71 [000] 27.444898: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=10
kswapd0-71 [000] 27.445476: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=11
kswapd0-71 [000] 27.446053: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=12
kswapd0-71 [000] 27.446646: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=13
kswapd0-71 [000] 27.447230: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=14
kswapd0-71 [000] 27.447812: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=15
kswapd0-71 [000] 27.448391: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=16
ann-423 [003] 28.028285: mm_vmscan_kswapd_clear_hopeless: nid=0 reason=PCP
Link: https://lkml.kernel.org/r/20260120024402.387576-3-jiayuan.chen@linux.dev
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [tracing]
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's make it consistent with the naming of the files but also with the
naming of CONFIG_BALLOON_MIGRATION.
While at it, add a "/* CONFIG_BALLOON */".
Link: https://lkml.kernel.org/r/20260119230133.3551867-24-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While compaction depends on migration, the other direction is not the
case. So let's make it clearer that this is all about migration of
balloon pages.
Adjust all comments/docs in the core to talk about "migration" instead of
"compaction".
While at it add some "/* CONFIG_BALLOON_MIGRATION */".
Link: https://lkml.kernel.org/r/20260119230133.3551867-23-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several helper functions for managing node and zone states have become
obsolete and no longer have any callers within the kernel.
inc_node_state()
inc_zone_state()
dec_zone_state()
This commit removes the dead code.
Link: https://lkml.kernel.org/r/20251225210213.2553-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Correct several typos in comments across files in mm/
[akpm@linux-foundation.org: also fix comment grammar, per SeongJae]
Link: https://lkml.kernel.org/r/20251218150906.25042-1-klourencodev@gmail.com
Signed-off-by: Kevin Lourenco <klourencodev@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The comment explaining why these parts use preempt_disable_nested() is in
__mod_zone_page_state(), not in __mod_node_page_state(), so we should see
__mod_zone_page_state(). Just correct it.
Link: https://lkml.kernel.org/r/20251110084437.46701-1-qi.zheng@linux.dev
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The nr_free_highatomic is a key factor in calculating watermarks as it
affects the free pages count. Adding this metric, along with
nr_reserved_highatomic, to /proc/zoneinfo facilitates easier diagnosis
memory watermark calculations and memory pressure states.
Sample output:
cat /proc/zoneinfo
......
pagesets
cpu: 0
count: 52069
high: 52675
batch: 63
high_min: 13971
high_max: 62284
vm stats threshold: 10
node_unreclaimable: 0
start_pfn: 4096
reserved_highatomic: 5120
free_highatomic: 2081
Link: https://lkml.kernel.org/r/20251027141818.283587-1-jiayuan.chen@linux.dev
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Adjust misaligned braces in fold_diff() to improve code readability and
maintain consistent coding style.
[akpm@linux-foundation.org: add braces, per Vlastimil & Liam]
Link: https://lkml.kernel.org/r/aPc4I/8zXCGyiapN@pilot-ThinkCentre-M930t-N000
Signed-off-by: Jing Su <jingsusu@didiglobal.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/page_alloc: Batch callers of free_pcppages_bulk", v5.
Motivation & Approach
=====================
While testing workloads with high sustained memory pressure on large
machines in the Meta fleet (1Tb memory, 316 CPUs), we saw an unexpectedly
high number of softlockups. Further investigation showed that the zone
lock in free_pcppages_bulk was being held for a long time, and was called
to free 2k+ pages over 100 times just during boot.
This causes starvation in other processes for the zone lock, which can
lead to the system stalling as multiple threads cannot make progress
without the locks. We can see these issues manifesting as warnings:
[ 4512.591979] rcu: INFO: rcu_sched self-detected stall on CPU
[ 4512.604370] rcu: 20-....: (9312 ticks this GP) idle=a654/1/0x4000000000000000 softirq=309340/309344 fqs=5426
[ 4512.626401] rcu: hardirqs softirqs csw/system
[ 4512.638793] rcu: number: 0 145 0
[ 4512.651177] rcu: cputime: 30 10410 174 ==> 10558(ms)
[ 4512.666657] rcu: (t=21077 jiffies g=783665 q=1242213 ncpus=316)
While these warnings don't indicate a crash or a kernel panic, they do
point to the underlying issue of lock contention. To prevent starvation
in both locks, batch the freeing of pages using pcp->batch.
Because free_pcppages_bulk is called with the pcp lock and acquires the
zone lock, relinquishing and reacquiring the locks are only effective when
both of them are broken together (unless the system was built with queued
spinlocks). Thus, instead of modifying free_pcppages_bulk to break both
locks, batch the freeing from its callers instead.
A similar fix has been implemented in the Meta fleet, and we have seen
significantly less softlockups.
Testing
=======
The following are a few synthetic benchmarks, made on three machines. The
first is a large machine with 754GiB memory and 316 processors.
The second is a relatively smaller machine with 251GiB memory and 176
processors. The third and final is the smallest of the three, which has 62GiB
memory and 36 processors.
On all machines, I kick off a kernel build with -j$(nproc).
Negative delta is better (faster compilation).
Large machine (754GiB memory, 316 processors)
make -j$(nproc)
+------------+---------------+-----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+-----------+
| real | 0.8070 | - 1.4865 |
| user | 0.2823 | + 0.4081 |
| sys | 5.0267 | -11.8737 |
+------------+---------------+-----------+
Medium machine (251GiB memory, 176 processors)
make -j$(nproc)
+------------+---------------+----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+----------+
| real | 0.2806 | +0.0351 |
| user | 0.0994 | +0.3170 |
| sys | 0.6229 | -0.6277 |
+------------+---------------+----------+
Small machine (62GiB memory, 36 processors)
make -j$(nproc)
+------------+---------------+----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+----------+
| real | 0.1503 | -2.6585 |
| user | 0.0431 | -2.2984 |
| sys | 0.1870 | -3.2013 |
+------------+---------------+----------+
Here, variation is the coefficient of variation, i.e. standard deviation
/ mean.
Based on these results, it seems like there are varying degrees to how
much lock contention this reduces. For the largest and smallest machines
that I ran the tests on, it seems like there is quite some significant
reduction. There is also some performance increases visible from
userspace.
Interestingly, the performance gains don't scale with the size of the
machine, but rather there seems to be a dip in the gain there is for the
medium-sized machine. One possible theory is that because the high
watermark depends on both memory and the number of local CPUs, what
impacts zone contention the most is not these individual values, but
rather the ratio of mem:processors.
This patch (of 5):
Currently, refresh_cpu_vm_stats returns an int, indicating how many
changes were made during its updates. Using this information, callers
like vmstat_update can heuristically determine if more work will be done
in the future.
However, all of refresh_cpu_vm_stats's callers either (a) ignore the
result, only caring about performing the updates, or (b) only care about
whether changes were made, but not *how many* changes were made.
Simplify the code by returning a bool instead to indicate if updates
were made.
In addition, simplify fold_diff and decay_pcp_high to return a bool
for the same reason.
Link: https://lkml.kernel.org/r/20251014145011.3427205-1-joshua.hahnjy@gmail.com
Link: https://lkml.kernel.org/r/20251014145011.3427205-2-joshua.hahnjy@gmail.com
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Chris Mason <clm@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If kswapd fails to reclaim pages from a node MAX_RECLAIM_RETRIES in a
row, kswapd on that node gets disabled. That is, the system won't wakeup
kswapd for that node until page reclamation is observed at least once.
That reclamation is mostly done by direct reclaim, which in turn enables
kswapd back.
However, on systems with CXL memory nodes, workloads with high anon page
usage can disable kswapd indefinitely, without triggering direct
reclaim. This can be reproduced with following steps:
numa node 0 (32GB memory, 48 CPUs)
numa node 2~5 (512GB CXL memory, 128GB each)
(numa node 1 is disabled)
swap space 8GB
1) Set /sys/kernel/mm/demotion_enabled to 0.
2) Set /proc/sys/kernel/numa_balancing to 0.
3) Run a process that allocates and random accesses 500GB of anon
pages.
4) Let the process exit normally.
During 3), free memory on node 0 gets lower than low watermark, and
kswapd runs and depletes swap space. Then, kswapd fails consecutively
and gets disabled. Allocation afterwards happens on CXL memory, so node
0 never gains more memory pressure to trigger direct reclaim.
After 4), kswapd on node 0 remains disabled, and tasks running on that
node are unable to swap. If you turn on NUMA_BALANCING_MEMORY_TIERING
and demotion now, it won't work properly since kswapd is disabled.
To mitigate this problem, reset kswapd_failures to 0 on following
conditions:
a) ZONE_BELOW_HIGH bit of a zone in hopeless node with a fallback
memory node gets cleared.
b) demotion_enabled is changed from false to true.
Rationale for a):
ZONE_BELOW_HIGH bit being cleared might be a sign that the node may
be reclaimable afterwards. This won't help much if the memory-hungry
process keeps running without freeing anything, but at least the node
will go back to reclaimable state when the process exits.
Rationale for b):
When demotion_enabled is false, kswapd can only reclaim anon pages by
swapping them out to swap space. If demotion_enabled is turned on,
kswapd can demote anon pages to another node for reclaiming. So, the
original failure count for determining reclaimability is no longer
valid.
Since kswapd_failures resets may be missed by ++ operation, it is
changed from int to atomic_t.
[akpm@linux-foundation.org: tweak whitespace]
Link: https://lkml.kernel.org/r/aL6qGi69jWXfPc4D@pcw-MS-7D22
Signed-off-by: Chanwon Park <flyinrm@gmail.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Kernel file pages are tricky to track because they are indistinguishable
from files whose usage is accounted to the root cgroup.
To maintain good accounting, introduce a vmstat counter tracking kernel
file pages.
Confirmed that these work as expected at a high level by mounting a btrfs
using AS_KERNEL_FILE for metadata pages, and seeing the counter rise with
fs usage then go back to a minimal level after drop_caches and finally
down to 0 after unmounting the fs.
Link: https://lkml.kernel.org/r/08ff633e3a005ed5f7691bfd9f58a5df8e474339.1755812945.git.boris@bur.io
Signed-off-by: Boris Burkov <boris@bur.io>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Tested-by: syzbot@syzkaller.appspotmail.com
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Qu Wenruo <wqu@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Goto-san reported confusing pgpromote statistics where the
pgpromote_success count significantly exceeded pgpromote_candidate.
On a system with three nodes (nodes 0-1: DRAM 4GB, node 2: NVDIMM 4GB):
# Enable demotion only
echo 1 > /sys/kernel/mm/numa/demotion_enabled
numactl -m 0-1 memhog -r200 3500M >/dev/null &
pid=$!
sleep 2
numactl memhog -r100 2500M >/dev/null &
sleep 10
kill -9 $pid # terminate the 1st memhog
# Enable promotion
echo 2 > /proc/sys/kernel/numa_balancing
After a few seconds, we observeed `pgpromote_candidate < pgpromote_success`
$ grep -e pgpromote /proc/vmstat
pgpromote_success 2579
pgpromote_candidate 0
In this scenario, after terminating the first memhog, the conditions for
pgdat_free_space_enough() are quickly met, and triggers promotion.
However, these migrated pages are only counted for in PGPROMOTE_SUCCESS,
not in PGPROMOTE_CANDIDATE.
To solve these confusing statistics, introduce PGPROMOTE_CANDIDATE_NRL to
count the missed promotion pages. And also, not counting these pages into
PGPROMOTE_CANDIDATE is to avoid changing the existing algorithm or
performance of the promotion rate limit.
Link: https://lkml.kernel.org/r/20250901090122.124262-1-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/20250729035101.1601407-1-ruansy.fnst@fujitsu.com
Fixes: c6833e10008f ("memory tiering: rate limit NUMA migration throughput")
Co-developed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Ruan Shiyang <ruansy.fnst@fujitsu.com>
Reported-by: Yasunori Gotou (Fujitsu) <y-goto@fujitsu.com>
Suggested-by: Huang Ying <ying.huang@linux.alibaba.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The only user of the counter (FUSE) was removed in commit 0c58a97f919c
("fuse: remove tmp folio for writebacks and internal rb tree") so follow
the established pattern of removing the counter and hardcoding 0 in
meminfo output, as done recently with NR_BOUNCE. Update documentation for
procfs, including for the value for Bounce that was missed when removing
its counter.
Also remove the mention of NR_WRITEBACK_TEMP implications from a comment
in wb_position_ratio(). The rest of the comment there about fuse setting
bdi->max_ratio to 1% is still correct.
[vbabka@suse.cz: v2]
Link: https://lkml.kernel.org/r/5a848e15-6a57-4ecb-a015-d4f358b8a5d3@suse.cz
Link: https://lkml.kernel.org/r/20250625-nr_writeback_removal-v1-1-7f2a0df70faa@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joanne Koong <joannelkoong@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Maxim Patlasov <mpatlasov@parallels.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The vmstat_text array defines labels for counters displayed in
/proc/vmstat. The current definition of the array implies a specific
order of the counters in their enums, making it fragile.
To make it clear which counter the label is for, use designated
initializers.
Link: https://lkml.kernel.org/r/20250603084556.113975-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
/proc/vmstat displays counters from various sources. It is easy to forget
to add or remove a label when a new counter is added or removed.
There is a BUILD_BUG_ON() function that catches missing labels. However,
for some reason, it ignores extra labels.
Let's make the check strict. This would help to catch issues when a
counter is removed.
Link: https://lkml.kernel.org/r/20250529110541.2960330-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The vmstat_text array contains labels for counters displayed in
/proc/vmstat. It is important to keep the labels in sync with the
counters.
There is a BUILD_BUG_ON() check in vmstat_start() that ensures the size of
the vmstat_text is not smaller than VM_EVENT_COUNTERS. This helps to
catch cases where a new counter is added but the label is not. However,
it does not help if a counter is removed but the label remains.
It would be nice to make the BUILD_BUG_ON() check more strict to catch
such cases. However, when compiling with MEMCG enabled but
VM_EVENT_COUNTERS disabled, the vmstat_text array is larger than
NR_VMSTAT_ITEMS.
This issue arises because some elements of the vmstat_text array are
present when either MEMCG or VM_EVENT_COUNTERS is enabled, but
NR_VMSTAT_ITEMS only accounts for these elements if VM_EVENT_COUNTERS is
enabled.
Instead of adjusting the NR_VMSTAT_ITEMS definition to account for MEMCG,
make MEMCG select VM_EVENT_COUNTERS. VM_EVENT_COUNTERS is enabled in most
configurations anyway.
Link: https://lkml.kernel.org/r/20250604095111.533783-1-kirill.shutemov@linux.intel.com
Fixes: ebc5d83d0443 ("mm/memcontrol: use vmstat names for printing statistics")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit ad6b26b6a0a79166b53209df2ca1cf8636296382.
This commit introduces per-memcg/task NUMA balance statistics, but
unfortunately it introduced a NULL pointer exception due to the following
race condition: After a swap task candidate was chosen, its mm_struct
pointer was set to NULL due to task exit. Later, when performing the
actual task swapping, the p->mm caused the problem.
CPU0 CPU1
:
...
task_numa_migrate
task_numa_find_cpu
task_numa_compare
# a normal task p is chosen
env->best_task = p
# p exit:
exit_signals(p);
p->flags |= PF_EXITING
exit_mm
p->mm = NULL;
migrate_swap_stop
__migrate_swap_task((arg->src_task, arg->dst_cpu)
count_memcg_event_mm(p->mm, NUMA_TASK_SWAP)# p->mm is NULL
task_lock() should be held and the PF_EXITING flag needs to be checked to
prevent this from happening. After discussion, the conclusion was that
adding a lock is not worthwhile for some statistics calculations. Revert
the change and rely on the tracepoint for this purpose.
Link: https://lkml.kernel.org/r/20250704135620.685752-1-yu.c.chen@intel.com
Link: https://lkml.kernel.org/r/20250708064917.BBD13C4CEED@smtp.kernel.org
Fixes: ad6b26b6a0a7 ("sched/numa: add statistics of numa balance task")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reported-by: Jirka Hladky <jhladky@redhat.com>
Closes: https://lore.kernel.org/all/CAE4VaGBLJxpd=NeRJXpSCuw=REhC5LWJpC29kDy-Zh2ZDyzQZA@mail.gmail.com/
Reported-by: Srikanth Aithal <Srikanth.Aithal@amd.com>
Reported-by: Suneeth D <Suneeth.D@amd.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Hladky <jhladky@redhat.com>
Cc: Libo Chen <libo.chen@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Hongyu noticed that the nr_unaccepted counter kept growing even in the
absence of unaccepted memory on the machine.
This happens due to a commit that removed NR_BOUNCE: it removed the
counter from the enum zone_stat_item, but left it in the vmstat_text
array.
As a result, all counters below nr_bounce in /proc/vmstat are shifted by
one line, causing the numa_hit counter to be labeled as nr_unaccepted.
To fix this issue, remove nr_bounce from the vmstat_text array.
Link: https://lkml.kernel.org/r/20250529103832.2937460-1-kirill.shutemov@linux.intel.com
Fixes: 194df9f66db8 ("mm: remove NR_BOUNCE zone stat")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On systems with NUMA balancing enabled, it has been found that tracking
task activities resulting from NUMA balancing is beneficial. NUMA
balancing employs two mechanisms for task migration: one is to migrate
a task to an idle CPU within its preferred node, and the other is to
swap tasks located on different nodes when they are on each other's
preferred nodes.
The kernel already provides NUMA page migration statistics in
/sys/fs/cgroup/mytest/memory.stat and /proc/{PID}/sched. However, it
lacks statistics regarding task migration and swapping. Therefore,
relevant counts for task migration and swapping should be added.
The following two new fields:
numa_task_migrated
numa_task_swapped
will be shown in /sys/fs/cgroup/{GROUP}/memory.stat, /proc/{PID}/sched
and /proc/vmstat.
Introducing both per-task and per-memory cgroup (memcg) NUMA balancing
statistics facilitates a rapid evaluation of the performance and
resource utilization of the target workload. For instance, users can
first identify the container with high NUMA balancing activity and then
further pinpoint a specific task within that group, and subsequently
adjust the memory policy for that task. In short, although it is
possible to iterate through /proc/$pid/sched to locate the problematic
task, the introduction of aggregated NUMA balancing activity for tasks
within each memcg can assist users in identifying the task more
efficiently through a divide-and-conquer approach.
As Libo Chen pointed out, the memcg event relies on the text names in
vmstat_text, and /proc/vmstat generates corresponding items based on
vmstat_text. Thus, the relevant task migration and swapping events
introduced in vmstat_text also need to be populated by
count_vm_numa_event(), otherwise these values are zero in /proc/vmstat.
In theory, task migration and swap events are part of the scheduler's
activities. The reason for exposing them through the
memory.stat/vmstat interface is that we already have NUMA balancing
statistics in memory.stat/vmstat, and these events are closely related
to each other. Following Shakeel's suggestion, we describe the
end-to-end flow/story of all these events occurring on a timeline for
future reference:
The goal of NUMA balancing is to co-locate a task and its memory pages
on the same NUMA node. There are two strategies: migrate the pages to
the task's node, or migrate the task to the node where its pages
reside.
Suppose a task p1 is running on Node 0, but its pages are located on
Node 1. NUMA page fault statistics for p1 reveal its "page footprint"
across nodes. If NUMA balancing detects that most of p1's pages are on
Node 1:
1.Page Migration Attempt:
The Numa balance first tries to migrate p1's pages to Node 0.
The numa_page_migrate counter increments.
2.Task Migration Strategies:
After the page migration finishes, Numa balance checks every
1 second to see if p1 can be migrated to Node 1.
Case 2.1: Idle CPU Available
If Node 1 has an idle CPU, p1 is directly scheduled there. This
event is logged as numa_task_migrated.
Case 2.2: No Idle CPU (Task Swap)
If all CPUs on Node1 are busy, direct migration could cause CPU
contention or load imbalance. Instead: The Numa balance selects a
candidate task p2 on Node 1 that prefers Node 0 (e.g., due to its own
page footprint). p1 and p2 are swapped. This cross-node swap is
recorded as numa_task_swapped.
Link: https://lkml.kernel.org/r/d00edb12ba0f0de3c5222f61487e65f2ac58f5b1.1748493462.git.yu.c.chen@intel.com
Link: https://lkml.kernel.org/r/7ef90a88602ed536be46eba7152ed0d33bad5790.1748002400.git.yu.c.chen@intel.com
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aubrey Li <aubrey.li@intel.com>
Cc: Ayush Jain <Ayush.jain3@amd.com>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Libo Chen <libo.chen@oracle.com>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use cl@gentwo.org throughout and remove the old email addresses.
Link: https://lkml.kernel.org/r/8b962f57-4d98-cbb0-cd82-b6ba456733e8@gentwo.org
Signed-off-by: Christoph Lameter <cl@gentwo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems
leading to the removal of vm_table from kernel/sysctl.c. This
increases modularity by placing the ctl_tables closer to where they
are actually used and at the same time reducing the chances of merge
conflicts in kernel/sysctl.c.
- ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the
extra{1,2} pointers as min/max values. This tightens the range of the
values that users can pass into the kernel effectively preventing
{under,over}flows.
- Misc fixes
Correct grammar errors and typos in test messages. Update sysctl
files in MAINTAINERS. Constified and removed array size in
declaration for alignment_tbl
* tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (22 commits)
selftests/sysctl: fix wording of help messages
selftests: fix spelling/grammar errors in sysctl/sysctl.sh
MAINTAINERS: Update sysctl file list in MAINTAINERS
sysctl: Fix underflow value setting risk in vm_table
coredump: Fixes core_pipe_limit sysctl proc_handler
sysctl: remove unneeded include
sysctl: remove the vm_table
sh: vdso: move the sysctl to arch/sh/kernel/vsyscall/vsyscall.c
x86: vdso: move the sysctl to arch/x86/entry/vdso/vdso32-setup.c
fs: dcache: move the sysctl to fs/dcache.c
sunrpc: simplify rpcauth_cache_shrink_count()
fs: drop_caches: move sysctl to fs/drop_caches.c
fs: fs-writeback: move sysctl to fs/fs-writeback.c
mm: nommu: move sysctl to mm/nommu.c
security: min_addr: move sysctl to security/min_addr.c
mm: mmap: move sysctl to mm/mmap.c
mm: util: move sysctls to mm/util.c
mm: vmscan: move vmscan sysctls to mm/vmscan.c
mm: swap: move sysctl to mm/swap.c
mm: filemap: move sysctl to mm/filemap.c
...
|
|
Patch series "Adding Proactive Memory Reclaim Statistics".
These two patches are related to proactive memory reclaim.
Patch 1 Split proactive reclaim statistics from direct reclaim counters
and introduces new counters: pgsteal_proactive, pgdemote_proactive,
and pgscan_proactive.
Patch 2 Adds pswpin and pswpout items to the cgroup-v2 documentation.
This patch (of 2):
In proactive memory reclaim scenarios, it is necessary to accurately track
proactive reclaim statistics to dynamically adjust the frequency and
amount of memory being reclaimed proactively. Currently, proactive
reclaim is included in direct reclaim statistics, which can make these
direct reclaim statistics misleading.
Therefore, separate proactive reclaim memory from the direct reclaim
counters by introducing new counters: pgsteal_proactive,
pgdemote_proactive, and pgscan_proactive, to avoid confusion with direct
reclaim.
Link: https://lkml.kernel.org/r/20250318075833.90615-1-jiahao.kernel@gmail.com
Link: https://lkml.kernel.org/r/20250318075833.90615-2-jiahao.kernel@gmail.com
Signed-off-by: Hao Jia <jiahao1@lixiang.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "track memory used by balloon drivers", v2.
This series introduces a way to track memory used by balloon drivers.
Add a NR_BALLOON_PAGES counter to track how many pages are reclaimed by
the balloon drivers. First add the accounting, then updates the balloon
drivers (virtio, Hyper-V, VMware, Pseries-cmm, and Xen) to maintain this
counter. The virtio, Vmware, and pseries-cmm balloon drivers utilize the
balloon_compaction interface to allocate and free balloon pages. Other
balloon drivers will have to maintain this counter manually.
This makes the information visible in memory reporting interfaces like
/proc/meminfo, show_mem, and OOM reporting.
This provides admins visibility into their VM balloon sizes without
requiring different virtualization tooling. Furthermore, this information
is helpful when debugging an OOM inside a VM.
This patch (of 4):
Add NR_BALLOON_PAGES counter to track memory used by balloon drivers and
expose it through /proc/meminfo and other memory reporting interfaces.
[npache@redhat.com: document Balloon Meminfo entry]
Link: https://lkml.kernel.org/r/a0315ccf-f244-460e-8643-fd7388724fe5@redhat.com
Link: https://lkml.kernel.org/r/20250314213757.244258-1-npache@redhat.com
Link: https://lkml.kernel.org/r/20250314213757.244258-2-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Alexander Atanasov <alexander.atanasov@virtuozzo.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Juegren Gross <jgross@suse.com>
Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The previous patch added pageblock_order reclaim to kswapd/kcompactd,
which helps, but produces only one block at a time. Allocation stalls and
THP failure rates are still higher than they could be.
To adequately reflect ALLOC_NOFRAGMENT demand for pageblocks, change the
watermarking for kswapd & kcompactd: instead of targeting the high
watermark in order-0 pages and checking for one suitable block, simply
require that the high watermark is entirely met in pageblocks.
To this end, track the number of free pages within contiguous pageblocks,
then change pgdat_balanced() and compact_finished() to check watermarks
against this new value.
This further reduces THP latencies and allocation stalls, and improves THP
success rates against the previous patch:
DEFRAGMODE-ASYNC DEFRAGMODE-ASYNC-WMARKS
Hugealloc Time mean 34300.36 ( +0.00%) 28904.00 ( -15.73%)
Hugealloc Time stddev 36390.42 ( +0.00%) 33464.37 ( -8.04%)
Kbuild Real time 196.13 ( +0.00%) 196.59 ( +0.23%)
Kbuild User time 1234.74 ( +0.00%) 1231.67 ( -0.25%)
Kbuild System time 62.62 ( +0.00%) 59.10 ( -5.54%)
THP fault alloc 57054.53 ( +0.00%) 63223.67 ( +10.81%)
THP fault fallback 11581.40 ( +0.00%) 5412.47 ( -53.26%)
Direct compact fail 107.80 ( +0.00%) 59.07 ( -44.79%)
Direct compact success 4.53 ( +0.00%) 2.80 ( -31.33%)
Direct compact success rate % 3.20 ( +0.00%) 3.99 ( +18.66%)
Compact daemon scanned migrate 5461033.93 ( +0.00%) 2267500.33 ( -58.48%)
Compact daemon scanned free 5824897.93 ( +0.00%) 2339773.00 ( -59.83%)
Compact direct scanned migrate 58336.93 ( +0.00%) 47659.93 ( -18.30%)
Compact direct scanned free 32791.87 ( +0.00%) 40729.67 ( +24.21%)
Compact total migrate scanned 5519370.87 ( +0.00%) 2315160.27 ( -58.05%)
Compact total free scanned 5857689.80 ( +0.00%) 2380502.67 ( -59.36%)
Alloc stall 2424.60 ( +0.00%) 638.87 ( -73.62%)
Pages kswapd scanned 2657018.33 ( +0.00%) 4002186.33 ( +50.63%)
Pages kswapd reclaimed 559583.07 ( +0.00%) 718577.80 ( +28.41%)
Pages direct scanned 722094.07 ( +0.00%) 355172.73 ( -50.81%)
Pages direct reclaimed 107257.80 ( +0.00%) 31162.80 ( -70.95%)
Pages total scanned 3379112.40 ( +0.00%) 4357359.07 ( +28.95%)
Pages total reclaimed 666840.87 ( +0.00%) 749740.60 ( +12.43%)
Swap out 77238.20 ( +0.00%) 110084.33 ( +42.53%)
Swap in 11712.80 ( +0.00%) 24457.00 ( +108.80%)
File refaults 143438.80 ( +0.00%) 188226.93 ( +31.22%)
Also of note is that compaction work overall is reduced. The reason for
this is that when free pageblocks are more readily available, allocations
are also much more likely to get physically placed in LRU order, instead
of being forced to scavenge free space here and there. This means that
reclaim by itself has better chances of freeing up whole blocks, and the
system relies less on compaction.
Comparing all changes to the vanilla kernel:
VANILLA DEFRAGMODE-ASYNC-WMARKS
Hugealloc Time mean 52739.45 ( +0.00%) 28904.00 ( -45.19%)
Hugealloc Time stddev 56541.26 ( +0.00%) 33464.37 ( -40.81%)
Kbuild Real time 197.47 ( +0.00%) 196.59 ( -0.44%)
Kbuild User time 1240.49 ( +0.00%) 1231.67 ( -0.71%)
Kbuild System time 70.08 ( +0.00%) 59.10 ( -15.45%)
THP fault alloc 46727.07 ( +0.00%) 63223.67 ( +35.30%)
THP fault fallback 21910.60 ( +0.00%) 5412.47 ( -75.29%)
Direct compact fail 195.80 ( +0.00%) 59.07 ( -69.48%)
Direct compact success 7.93 ( +0.00%) 2.80 ( -57.46%)
Direct compact success rate % 3.51 ( +0.00%) 3.99 ( +10.49%)
Compact daemon scanned migrate 3369601.27 ( +0.00%) 2267500.33 ( -32.71%)
Compact daemon scanned free 5075474.47 ( +0.00%) 2339773.00 ( -53.90%)
Compact direct scanned migrate 161787.27 ( +0.00%) 47659.93 ( -70.54%)
Compact direct scanned free 163467.53 ( +0.00%) 40729.67 ( -75.08%)
Compact total migrate scanned 3531388.53 ( +0.00%) 2315160.27 ( -34.44%)
Compact total free scanned 5238942.00 ( +0.00%) 2380502.67 ( -54.56%)
Alloc stall 2371.07 ( +0.00%) 638.87 ( -73.02%)
Pages kswapd scanned 2160926.73 ( +0.00%) 4002186.33 ( +85.21%)
Pages kswapd reclaimed 533191.07 ( +0.00%) 718577.80 ( +34.77%)
Pages direct scanned 400450.33 ( +0.00%) 355172.73 ( -11.31%)
Pages direct reclaimed 94441.73 ( +0.00%) 31162.80 ( -67.00%)
Pages total scanned 2561377.07 ( +0.00%) 4357359.07 ( +70.12%)
Pages total reclaimed 627632.80 ( +0.00%) 749740.60 ( +19.46%)
Swap out 47959.53 ( +0.00%) 110084.33 ( +129.53%)
Swap in 7276.00 ( +0.00%) 24457.00 ( +236.10%)
File refaults 138043.00 ( +0.00%) 188226.93 ( +36.35%)
THP allocation latencies and %sys time are down dramatically.
THP allocation failures are down from nearly 50% to 8.5%. And to recall
previous data points, the success rates are steady and reliable without
the cumulative deterioration of fragmentation events.
Compaction work is down overall. Direct compaction work especially is
drastically reduced. As an aside, its success rate of 4% indicates there
is room for improvement. For now it's good to rely on it less.
Reclaim work is up overall, however direct reclaim work is down. Part of
the increase can be attributed to a higher use of THPs, which due to
internal fragmentation increase the memory footprint. This is not
necessarily an unexpected side-effect for users of THP.
However, taken both points together, there may well be some opportunities
for fine tuning in the reclaim/compaction coordination.
[hannes@cmpxchg.org: fix squawks from rebasing]
Link: https://lkml.kernel.org/r/20250314210558.GD1316033@cmpxchg.org
Link: https://lkml.kernel.org/r/20250313210647.1314586-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This moves all vmstat related sysctls to its own file, removes useless
extern variable declarations, and do some related clean-ups. To avoid
compiler warnings when CONFIG_PROC_FS is not defined, add the macro
definition CONFIG_PROC_FS ahead CONFIG_NUMA in vmstat.c.
Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Change of attributes of the pages may lead to fragmentation of direct
mapping over time and performance degradation when these pages contain
executable code.
With current code it's one way road: kernel tries to avoid splitting
large pages, but it doesn't restore them back even if page attributes
got compatible again.
Any change to the mapping may potentially allow to restore large page.
Add a hook to cpa_flush() path that will check if the pages in the range
that were just touched can be mapped at PMD level. If the collapse at the
PMD level succeeded, also attempt to collapse PUD level.
The collapse logic runs only when a set_memory_ method explicitly sets
CPA_COLLAPSE flag, for now this is only enabled in set_memory_rox().
CPUs don't like[1] to have to have TLB entries of different size for the
same memory, but looks like it's okay as long as these entries have
matching attributes[2]. Therefore it's critical to flush TLB before any
following changes to the mapping.
Note that we already allow for multiple TLB entries of different sizes
for the same memory now in split_large_page() path. It's not a new
situation.
set_memory_4k() provides a way to use 4k pages on purpose. Kernel must
not remap such pages as large. Re-use one of software PTE bits to
indicate such pages.
[1] See Erratum 383 of AMD Family 10h Processors
[2] https://lore.kernel.org/linux-mm/1da1b025-cabc-6f04-bde5-e50830d1ecf0@amd.com/
[rppt@kernel.org:
* s/restore/collapse/
* update formatting per peterz
* use 'struct ptdesc' instead of 'struct page' for list of page tables to
be freed
* try to collapse PMD first and if it succeeds move on to PUD as peterz
suggested
* flush TLB twice: for changes done in the original CPA call and after
collapsing of large pages
* update commit message
]
Signed-off-by: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Co-developed-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250126074733.1384926-4-rppt@kernel.org
|
|
The upstream commit adcfb264c3ed ("vmstat: disable vmstat_work on
vmstat_cpu_down_prep()") introduced another warning during the boot phase
so was soon reverted on upstream by commit cd6313beaeae ("Revert "vmstat:
disable vmstat_work on vmstat_cpu_down_prep()""). This commit resolves it
and reattempts the original fix.
Even after mm/vmstat:online teardown, shepherd may still queue work for
the dying cpu until the cpu is removed from online mask. While it's quite
rare, this means that after unbind_workers() unbinds a per-cpu kworker, it
potentially runs vmstat_update for the dying CPU on an irrelevant cpu
before entering atomic AP states. When CONFIG_DEBUG_PREEMPT=y, it results
in the following error with the backtrace.
BUG: using smp_processor_id() in preemptible [00000000] code: \
kworker/7:3/1702
caller is refresh_cpu_vm_stats+0x235/0x5f0
CPU: 0 UID: 0 PID: 1702 Comm: kworker/7:3 Tainted: G
Tainted: [N]=TEST
Workqueue: mm_percpu_wq vmstat_update
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xb0
check_preemption_disabled+0xce/0xe0
refresh_cpu_vm_stats+0x235/0x5f0
vmstat_update+0x17/0xa0
process_one_work+0x869/0x1aa0
worker_thread+0x5e5/0x1100
kthread+0x29e/0x380
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
So, for mm/vmstat:online, disable vmstat_work reliably on teardown and
symmetrically enable it on startup.
For secondary CPUs during CPU hotplug scenarios, ensure the delayed work
is disabled immediately after the initialization. These CPUs are not yet
online when start_shepherd_timer() runs on boot CPU. vmstat_cpu_online()
will enable the work for them.
Link: https://lkml.kernel.org/r/20250108042807.3429745-1-koichiro.den@canonical.com
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Suggested-by: Huacai Chen <chenhuacai@kernel.org>
Tested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit adcfb264c3ed51fbbf5068ddf10d309a63683868.
It turns out this just causes a different warning splat instead that
seems to be much easier to trigger, so let's revert ASAP.
Reported-and-bisected-by: Borislav Petkov <bp@alien8.de>
Tested-by: Breno Leitao <leitao@debian.org>
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/all/20250106131817.GAZ3vYGVr3-hWFFPLj@fat_crate.local/
Cc: Koichiro Den <koichiro.den@canonical.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Even after mm/vmstat:online teardown, shepherd may still queue work for
the dying cpu until the cpu is removed from online mask. While it's quite
rare, this means that after unbind_workers() unbinds a per-cpu kworker, it
potentially runs vmstat_update for the dying CPU on an irrelevant cpu
before entering atomic AP states. When CONFIG_DEBUG_PREEMPT=y, it results
in the following error with the backtrace.
BUG: using smp_processor_id() in preemptible [00000000] code: \
kworker/7:3/1702
caller is refresh_cpu_vm_stats+0x235/0x5f0
CPU: 0 UID: 0 PID: 1702 Comm: kworker/7:3 Tainted: G
Tainted: [N]=TEST
Workqueue: mm_percpu_wq vmstat_update
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xb0
check_preemption_disabled+0xce/0xe0
refresh_cpu_vm_stats+0x235/0x5f0
vmstat_update+0x17/0xa0
process_one_work+0x869/0x1aa0
worker_thread+0x5e5/0x1100
kthread+0x29e/0x380
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
So, for mm/vmstat:online, disable vmstat_work reliably on teardown and
symmetrically enable it on startup.
Link: https://lkml.kernel.org/r/20241221033321.4154409-1-koichiro.den@canonical.com
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch introduces a new counter to memory.stat that tracks hugeTLB
usage, only if hugeTLB accounting is done to memory.current. This feature
is enabled the same way hugeTLB accounting is enabled, via the
memory_hugetlb_accounting mount flag for cgroupsv2.
1. Why is this patch necessary?
Currently, memcg hugeTLB accounting is an opt-in feature [1] that adds
hugeTLB usage to memory.current. However, the metric is not reported in
memory.stat. Given that users often interpret memory.stat as a breakdown
of the value reported in memory.current, the disparity between the two
reports can be confusing. This patch solves this problem by including the
metric in memory.stat as well, but only if it is also reported in
memory.current (it would also be confusing if the value was reported in
memory.stat, but not in memory.current)
Aside from the consistency between the two files, we also see benefits in
observability. Userspace might be interested in the hugeTLB footprint of
cgroups for many reasons. For instance, system admins might want to
verify that hugeTLB usage is distributed as expected across tasks: i.e.
memory-intensive tasks are using more hugeTLB pages than tasks that don't
consume a lot of memory, or are seen to fault frequently. Note that this
is separate from wanting to inspect the distribution for limiting purposes
(in which case, hugeTLB controller makes more sense).
2. We already have a hugeTLB controller. Why not use that?
It is true that hugeTLB tracks the exact value that we want. In fact, by
enabling the hugeTLB controller, we get all of the observability benefits
that I mentioned above, and users can check the total hugeTLB usage,
verify if it is distributed as expected, etc.
With this said, there are 2 problems:
(a) They are still not reported in memory.stat, which means the
disparity between the memcg reports are still there.
(b) We cannot reasonably expect users to enable the hugeTLB controller
just for the sake of hugeTLB usage reporting, especially since
they don't have any use for hugeTLB usage enforcing [2].
3. Implementation Details:
In the alloc / free hugetlb functions, we call lruvec_stat_mod_folio
regardless of whether memcg accounts hugetlb. mem_cgroup_commit_charge
which is called from alloc_hugetlb_folio will set memcg for the folio only
if the CGRP_ROOT_MEMORY_HUGETLB_ACCOUNTING cgroup mount option is used, so
lruvec_stat_mod_folio accounts per-memcg hugetlb counters only if the
feature is enabled. Regardless of whether memcg accounts for hugetlb, the
newly added global counter is updated and shown in /proc/vmstat.
The global counter is added because vmstats is the preferred framework for
cgroup stats. It makes stat items consistent between global and cgroups.
It also provides a per-node breakdown, which is useful. Because it does
not use cgroup-specific hooks, we also keep generic MM code separate from
memcg code.
[1] https://lore.kernel.org/all/20231006184629.155543-1-nphamcs@gmail.com/
[2] Of course, we can't make a new patch for every feature that can be
duplicated. However, since the existing solution of enabling the
hugeTLB controller is an imperfect solution that still leaves a
discrepancy between memory.stat and memory.curent, I think that it
is reasonable to isolate the feature in this case.
Link: https://lkml.kernel.org/r/20241101204402.1885383-1-joshua.hahnjy@gmail.com
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Suggested-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since 5.14-rc1, NUMA events will only be folded from per-CPU statistics to
per zone and global statistics when the user actually needs it.
Currently, the kernel has performs the fold operation when reading
/proc/vmstat, but does not perform the fold operation in /proc/zoneinfo.
This can lead to inaccuracies in the following statistics in zoneinfo:
- numa_hit
- numa_miss
- numa_foreign
- numa_interleave
- numa_local
- numa_other
Therefore, before printing per-zone vm_numa_event when reading
/proc/zoneinfo, we should also perform the fold operation.
Link: https://lkml.kernel.org/r/1730433998-10461-1-git-send-email-mengensun@tencent.com
Fixes: f19298b9516c ("mm/vmstat: convert NUMA statistics to basic NUMA counters")
Signed-off-by: MengEn Sun <mengensun@tencent.com>
Reviewed-by: JinLiang Zheng <alexjlzheng@tencent.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pick up e7ac4daeed91 ("mm: count zeromap read and set for swapout and
swapin") in order to move
mm: define obj_cgroup_get() if CONFIG_MEMCG is not defined
mm: zswap: modify zswap_compress() to accept a page instead of a folio
mm: zswap: rename zswap_pool_get() to zswap_pool_tryget()
mm: zswap: modify zswap_stored_pages to be atomic_long_t
mm: zswap: support large folios in zswap_store()
mm: swap: count successful large folio zswap stores in hugepage zswpout stats
mm: zswap: zswap_store_page() will initialize entry after adding to xarray.
mm: add per-order mTHP swpin counters
from mm-unstable into mm-stable.
|
|
When the proportion of folios from the zeromap is small, missing their
accounting may not significantly impact profiling. However, it's easy to
construct a scenario where this becomes an issue—for example, allocating
1 GB of memory, writing zeros from userspace, followed by MADV_PAGEOUT,
and then swapping it back in. In this case, the swap-out and swap-in
counts seem to vanish into a black hole, potentially causing semantic
ambiguity.
On the other hand, Usama reported that zero-filled pages can exceed 10% in
workloads utilizing zswap, while Hailong noted that some app in Android
have more than 6% zero-filled pages. Before commit 0ca0c24e3211 ("mm:
store zero pages to be swapped out in a bitmap"), both zswap and zRAM
implemented similar optimizations, leading to these optimized-out pages
being counted in either zswap or zRAM counters (with pswpin/pswpout also
increasing for zRAM). With zeromap functioning prior to both zswap and
zRAM, userspace will no longer detect these swap-out and swap-in actions.
We have three ways to address this:
1. Introduce a dedicated counter specifically for the zeromap.
2. Use pswpin/pswpout accounting, treating the zero map as a standard
backend. This approach aligns with zRAM's current handling of
same-page fills at the device level. However, it would mean losing the
optimized-out page counters previously available in zRAM and would not
align with systems using zswap. Additionally, as noted by Nhat Pham,
pswpin/pswpout counters apply only to I/O done directly to the backend
device.
3. Count zeromap pages under zswap, aligning with system behavior when
zswap is enabled. However, this would not be consistent with zRAM, nor
would it align with systems lacking both zswap and zRAM.
Given the complications with options 2 and 3, this patch selects
option 1.
We can find these counters from /proc/vmstat (counters for the whole
system) and memcg's memory.stat (counters for the interested memcg).
For example:
$ grep -E 'swpin_zero|swpout_zero' /proc/vmstat
swpin_zero 1648
swpout_zero 33536
$ grep -E 'swpin_zero|swpout_zero' /sys/fs/cgroup/system.slice/memory.stat
swpin_zero 3905
swpout_zero 3985
This patch does not address any specific zeromap bug, but the missing
swpout and swpin counts for zero-filled pages can be highly confusing and
may mislead user-space agents that rely on changes in these counters as
indicators. Therefore, we add a Fixes tag to encourage the inclusion of
this counter in any kernel versions with zeromap.
Many thanks to Kanchana for the contribution of changing
count_objcg_event() to count_objcg_events() to support large folios[1],
which has now been incorporated into this patch.
[1] https://lkml.kernel.org/r/20241001053222.6944-5-kanchana.p.sridhar@intel.com
Link: https://lkml.kernel.org/r/20241107011246.59137-1-21cnbao@gmail.com
Fixes: 0ca0c24e3211 ("mm: store zero pages to be swapped out in a bitmap")
Co-developed-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Hailong Liu <hailong.liu@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
refresh_zone_stat_thresholds function has two loops which is expensive for
higher number of CPUs and NUMA nodes.
Below is the rough estimation of total iterations done by these loops
based on number of NUMA and CPUs.
Total number of iterations: nCPU * 2 * Numa * mCPU
Where:
nCPU = total number of CPUs
Numa = total number of NUMA nodes
mCPU = mean value of total CPUs (e.g., 512 for 1024 total CPUs)
For the system under test with 16 NUMA nodes and 1024 CPUs, this results
in a substantial increase in the number of loop iterations during boot-up
when NUMA is enabled:
No NUMA = 1024*2*1*512 = 1,048,576 : Here refresh_zone_stat_thresholds
takes around 224 ms total for all the CPUs in the system under test.
16 NUMA = 1024*2*16*512 = 16,777,216 : Here refresh_zone_stat_thresholds
takes around 4.5 seconds total for all the CPUs in the system under test.
Calling this for each CPU is expensive when there are large number of CPUs
along with multiple NUMAs. Fix this by deferring
refresh_zone_stat_thresholds to be called later at once when all the
secondary CPUs are up. Also, register the DYN hooks to keep the existing
hotplug functionality intact.
Link: https://lkml.kernel.org/r/1723443220-20623-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Srivatsa S. Bhat (Microsoft) <srivatsa@csail.mit.edu>
Cc: Saurabh Singh Sengar <ssengar@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When we do not set percpu_pagelist_high_fraction the kernel will compute
the pcp high_min/max by itself, which makes it hard to determine the
current high_min/max values.
So output the pcp high_min/max values to /proc/zoneinfo.
Link: https://lkml.kernel.org/r/20241010120935.656619-1-mengensun@tencent.com
Signed-off-by: MengEn Sun <mengensun@tencent.com>
Reviewed-by: Jinliang Zheng <alexjlzheng@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is an attempt to mitigate the issue of running out of memory when THP
is always enabled. During runtime whenever a THP is being faulted in
(__do_huge_pmd_anonymous_page) or collapsed by khugepaged
(collapse_huge_page), the THP is added to _deferred_list. Whenever memory
reclaim happens in linux, the kernel runs the deferred_split shrinker
which goes through the _deferred_list.
If the folio was partially mapped, the shrinker attempts to split it. If
the folio is not partially mapped, the shrinker checks if the THP was
underused, i.e. how many of the base 4K pages of the entire THP were
zero-filled. If this number goes above a certain threshold (decided by
/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none), the
shrinker will attempt to split that THP. Then at remap time, the pages
that were zero-filled are mapped to the shared zeropage, hence saving
memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-6-usamaarif642@gmail.com
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Suggested-by: Rik van Riel <riel@surriel.com>
Co-authored-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <zhais@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Print the promo watermark in zoneinfo just like other watermarks. This
helps users check and verify all the watermarks are appropriate.
Link: https://lkml.kernel.org/r/20240801232548.36604-3-kaiyang2@cs.cmu.edu
Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As part of the dynamic kernel stack project, we need to know the amount of
data that can be saved by reducing the default kernel stack size [1].
Provide a kernel stack usage histogram to aid in optimizing kernel stack
sizes and minimizing memory waste in large-scale environments. The
histogram divides stack usage into power-of-two buckets and reports the
results in /proc/vmstat. This information is especially valuable in
environments with millions of machines, where even small optimizations can
have a significant impact.
The histogram data is presented in /proc/vmstat with entries like
"kstack_1k", "kstack_2k", and so on, indicating the number of threads that
exited with stack usage falling within each respective bucket.
Example outputs:
Intel:
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
ARM with 64K page_size:
$ grep kstack /proc/vmstat
kstack_1k 1
kstack_2k 340
kstack_4k 25212
kstack_8k 1659
kstack_16k 0
kstack_32k 0
kstack_64k 0
Note: once the dynamic kernel stack is implemented it will depend on the
implementation the usability of this feature: On hardware that supports
faults on kernel stacks, we will have other metrics that show the total
number of pages allocated for stacks. On hardware where faults are not
supported, we will most likely have some optimization where only some
threads are extended, and for those, these metrics will still be very
useful.
[1] https://lwn.net/Articles/974367
Link: https://lkml.kernel.org/r/20240730150158.832783-3-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240724203322.2765486-3-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
/proc/vmstat currently shows the number of node_reclaim() failures when
vm.zone_reclaim_mode is set appropriately. It would be convenient to have
the number of successes right next to zone_reclaim_failed (similar to
compaction and migration).
While just a trivially addition to the vmstat file. It was helpful during
benchmarking to not have to probe node_reclaim() to observe the
success/failure ratio.
Link: https://lkml.kernel.org/r/20240722171316.7517-1-mcassell411@gmail.com
Signed-off-by: Matthew Cassell <mcassell411@gmail.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix invalid access to pgdat during hot-remove operation:
ndctl users reported a GPF when trying to destroy a namespace:
$ ndctl destroy-namespace all -r all -f
Segmentation fault
dmesg:
Oops: general protection fault, probably for
non-canonical address 0xdffffc0000005650: 0000 [#1] PREEMPT SMP KASAN
PTI
KASAN: probably user-memory-access in range
[0x000000000002b280-0x000000000002b287]
CPU: 26 UID: 0 PID: 1868 Comm: ndctl Not tainted 6.11.0-rc1 #1
Hardware name: Dell Inc. PowerEdge R640/08HT8T, BIOS
2.20.1 09/13/2023
RIP: 0010:mod_node_page_state+0x2a/0x110
cxl-test users report a GPF when trying to unload the test module:
$ modrpobe -r cxl-test
dmesg
BUG: unable to handle page fault for address: 0000000000004200
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 UID: 0 PID: 1076 Comm: modprobe Tainted: G O N 6.11.0-rc1 #197
Tainted: [O]=OOT_MODULE, [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/15
RIP: 0010:mod_node_page_state+0x6/0x90
Currently, when memory is hot-plugged or hot-removed the accounting is
done based on the assumption that memmap is allocated from the same node
as the hot-plugged/hot-removed memory, which is not always the case.
In addition, there are challenges with keeping the node id of the memory
that is being remove to the time when memmap accounting is actually
performed: since this is done after remove_pfn_range_from_zone(), and
also after remove_memory_block_devices(). Meaning that we cannot use
pgdat nor walking though memblocks to get the nid.
Given all of that, account the memmap overhead system wide instead.
For this we are going to be using global atomic counters, but given that
memmap size is rarely modified, and normally is only modified either
during early boot when there is only one CPU, or under a hotplug global
mutex lock, therefore there is no need for per-cpu optimizations.
Also, while we are here rename nr_memmap to nr_memmap_pages, and
nr_memmap_boot to nr_memmap_boot_pages to be self explanatory that the
units are in page count.
[pasha.tatashin@soleen.com: address a few nits from David Hildenbrand]
Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240808213437.682006-4-pasha.tatashin@soleen.com
Fixes: 15995a352474 ("mm: report per-page metadata information")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-cxl/CAHj4cs9Ax1=CoJkgBGP_+sNu6-6=6v=_L-ZBZY0bVLD3wUWZQg@mail.gmail.com
Reported-by: Alison Schofield <alison.schofield@intel.com>
Closes: https://lore.kernel.org/linux-mm/Zq0tPd2h6alFz8XF@aschofie-mobl2/#t
Tested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Fan Ni <fan.ni@samsung.com>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
/proc/vmstat contains events and stats, events can only grow, but stats
can grow and shrink.
vmstat has the following:
-------------------------
NR_VM_ZONE_STAT_ITEMS: per-zone stats
NR_VM_NUMA_EVENT_ITEMS: per-numa events
NR_VM_NODE_STAT_ITEMS: per-numa stats
NR_VM_WRITEBACK_STAT_ITEMS: system-wide background-writeback and
dirty-throttling tresholds.
NR_VM_EVENT_ITEMS: system-wide events
-------------------------
Rename NR_VM_WRITEBACK_STAT_ITEMS to NR_VM_STAT_ITEMS, to track the
system-wide stats, we are going to add per-page metadata stats to this
category in the next patch.
Also delete unused writeback_stat_name().
Link: https://lkml.kernel.org/r/20240809191020.1142142-2-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240808213437.682006-3-pasha.tatashin@soleen.com
Fixes: 15995a352474 ("mm: report per-page metadata information")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
Today, we do not have any observability of per-page metadata and how much
it takes away from the machine capacity. Thus, we want to describe the
amount of memory that is going towards per-page metadata, which can vary
depending on build configuration, machine architecture, and system use.
This patch adds 2 fields to /proc/vmstat that can used as shown below:
Accounting per-page metadata allocated by boot-allocator:
/proc/vmstat:nr_memmap_boot * PAGE_SIZE
Accounting per-page metadata allocated by buddy-allocator:
/proc/vmstat:nr_memmap * PAGE_SIZE
Accounting total Perpage metadata allocated on the machine:
(/proc/vmstat:nr_memmap_boot +
/proc/vmstat:nr_memmap) * PAGE_SIZE
Utility for userspace:
Observability: Describe the amount of memory overhead that is going to
per-page metadata on the system at any given time since this overhead is
not currently observable.
Debugging: Tracking the changes or absolute value in struct pages can help
detect anomalies as they can be correlated with other metrics in the
machine (e.g., memtotal, number of huge pages, etc).
page_ext overheads: Some kernel features such as page_owner
page_table_check that use page_ext can be optionally enabled via kernel
parameters. Having the total per-page metadata information helps users
precisely measure impact. Furthermore, page-metadata metrics will reflect
the amount of struct pages reliquished (or overhead reduced) when
hugetlbfs pages are reserved which will vary depending on whether hugetlb
vmemmap optimization is enabled or not.
For background and results see:
lore.kernel.org/all/20240220214558.3377482-1-souravpanda@google.com
Link: https://lkml.kernel.org/r/20240605222751.1406125-1-souravpanda@google.com
Signed-off-by: Sourav Panda <souravpanda@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chen Linxuan <chenlinxuan@uniontech.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tomas Mudrunka <tomas.mudrunka@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add NR_IOMMU_PAGES into node_stat_item that counts number of pages
that are allocated by the IOMMU subsystem.
The allocations can be view per-node via:
/sys/devices/system/node/nodeN/vmstat.
For example:
$ grep iommu /sys/devices/system/node/node*/vmstat
/sys/devices/system/node/node0/vmstat:nr_iommu_pages 106025
/sys/devices/system/node/node1/vmstat:nr_iommu_pages 3464
The value is in page-count, therefore, in the above example
the iommu allocations amount to ~428M.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240413002522.1101315-11-pasha.tatashin@soleen.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
