| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Alexander reported a circular lock dependency revealed by the mmap1 ltp
test:
LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1))
WARNING: possible circular locking dependency detected
5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted
------------------------------------------------------
mmap1/202299 is trying to acquire lock:
00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0
but task is already holding lock:
00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&sighand->siglock){-.-.}-{2:2}:
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
__lock_task_sighand+0x90/0x190
cgroup_freeze_task+0x2e/0x90
cgroup_migrate_execute+0x11c/0x608
cgroup_update_dfl_csses+0x246/0x270
cgroup_subtree_control_write+0x238/0x518
kernfs_fop_write_iter+0x13e/0x1e0
new_sync_write+0x100/0x190
vfs_write+0x22c/0x2d8
ksys_write+0x6c/0xf8
__do_syscall+0x1da/0x208
system_call+0x82/0xb0
-> #0 (css_set_lock){..-.}-{2:2}:
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sighand->siglock);
lock(css_set_lock);
lock(&sighand->siglock);
lock(css_set_lock);
*** DEADLOCK ***
2 locks held by mmap1/202299:
#0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
#1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168
stack backtrace:
CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
dump_stack_lvl+0x76/0x98
check_noncircular+0x136/0x158
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
INFO: lockdep is turned off.
In this example a slab allocation from __send_signal() caused a
refilling and draining of a percpu objcg stock, resulted in a releasing
of another non-related objcg. Objcg release path requires taking the
css_set_lock, which is used to synchronize objcg lists.
This can create a circular dependency with the sighandler lock, which is
taken with the locked css_set_lock by the freezer code (to freeze a
task).
In general it seems that using css_set_lock to synchronize objcg lists
makes any slab allocations and deallocation with the locked css_set_lock
and any intervened locks risky.
To fix the problem and make the code more robust let's stop using
css_set_lock to synchronize objcg lists and use a new dedicated spinlock
instead.
Link: https://lkml.kernel.org/r/Yfm1IHmoGdyUR81T@carbon.dhcp.thefacebook.com
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
|
|
The kvmalloc* allocation functions can fallback to vmalloc allocations
and more often on long running machines. In addition the kernel does
have __GFP_ACCOUNT kvmalloc* calls. So, often on long running machines,
the memory.stat does not tell the complete picture which type of memory
is charged to the memcg. So add a per-memcg vmalloc stat.
[shakeelb@google.com: page_memcg() within rcu lock, per Muchun]
Link: https://lkml.kernel.org/r/20211222052457.1960701-1-shakeelb@google.com
[akpm@linux-foundation.org: remove cast, per Muchun]
[shakeelb@google.com: remove area->page[0] checks and move to page by page accounting per Michal]
Link: https://lkml.kernel.org/r/20220104222341.3972772-1-shakeelb@google.com
Link: https://lkml.kernel.org/r/20211221215336.1922823-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Link: https://github.com/KSPP/linux/issues/160
Link: https://lkml.kernel.org/r/20211216022024.127375-1-wangweiyang2@huawei.com
Signed-off-by: Wang Weiyang <wangweiyang2@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 11192d9c124d ("memcg: flush stats only if updated") added
tracking of memcg stats updates which is used by the readers to flush
only if the updates are over a certain threshold. However each
individual update can correspond to a large value change for a given
stat. For example adding or removing a hugepage to an LRU changes the
stat by thp_nr_pages (512 on x86_64).
Treating the update related to THP as one can keep the stat off, in
theory, by (thp_nr_pages * nr_cpus * CHARGE_BATCH) before flush.
To handle such scenarios, this patch adds consideration of the stat
update value as well instead of just the update event. In addition let
the asyn flusher unconditionally flush the stats to put time limit on
the stats skew and hopefully a lot less readers would need to flush.
Link: https://lkml.kernel.org/r/20211118065350.697046-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Our container agent wants to know when a container exits if it was OOM
killed or not to report to the user. We use memory.oom.group = 1 to
ensure that OOM kills within the container's cgroup kill everything.
Existing memory.events are insufficient for knowing if this triggered:
1) Our current approach reads memory.events oom_kill and reports the
container was killed if the value is non-zero. This is erroneous in
some cases where containers create their children cgroups with
memory.oom.group=1 as such OOM kills will get counted against the
container cgroup's oom_kill counter despite not actually OOM killing
the entire container.
2) Reading memory.events.local will fail to identify OOM kills in leaf
cgroups (that don't set memory.oom.group) within the container
cgroup.
This patch adds a new oom_group_kill event when memory.oom.group
triggers to allow userspace to cleanly identify when an entire cgroup is
oom killed.
[schatzberg.dan@gmail.com: changes from Johannes and Chris]
Link: https://lkml.kernel.org/r/20211213162511.2492267-1-schatzberg.dan@gmail.com
Link: https://lkml.kernel.org/r/20211203162426.3375036-1-schatzberg.dan@gmail.com
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 494c1dfe855e ("mm: memcg/slab: create a new set of kmalloc-cg-<n>
caches") makes cgroup_memory_nokmem global, however, it is unnecessary
because there is already a function mem_cgroup_kmem_disabled() which
exports it.
Just make it static and replace it with mem_cgroup_kmem_disabled() in
mm/slab_common.c.
Link: https://lkml.kernel.org/r/20211109065418.21693-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is no external users of slab_start/next/stop(), so make them
static. And the memory.kmem.slabinfo is deprecated, which outputs
nothing now, so move memcg_slab_show() into mm/memcontrol.c and rename
it to mem_cgroup_slab_show to be consistent with other function names.
Link: https://lkml.kernel.org/r/20211109133359.32881-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page->memcg_data is used with MEMCG_DATA_OBJCGS flag only for slab pages
so convert all the related infrastructure to struct slab. Also use
struct folio instead of struct page when resolving object pointers.
This is not just mechanistic changing of types and names. Now in
mem_cgroup_from_obj() we use folio_test_slab() to decide if we interpret
the folio as a real slab instead of a large kmalloc, instead of relying
on MEMCG_DATA_OBJCGS bit that used to be checked in page_objcgs_check().
Similarly in memcg_slab_free_hook() where we can encounter
kmalloc_large() pages (here the folio slab flag check is implied by
virt_to_slab()). As a result, page_objcgs_check() can be dropped instead
of converted.
To avoid include cycles, move the inline definition of slab_objcgs()
from memcontrol.h to mm/slab.h.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <cgroups@vger.kernel.org>
|
|
KASAN, KFENCE and memcg interact with SLAB or SLUB internals through
functions nearest_obj(), obj_to_index() and objs_per_slab() that use
struct page as parameter. This patch converts it to struct slab
including all callers, through a coccinelle semantic patch.
// Options: --include-headers --no-includes --smpl-spacing include/linux/slab_def.h include/linux/slub_def.h mm/slab.h mm/kasan/*.c mm/kfence/kfence_test.c mm/memcontrol.c mm/slab.c mm/slub.c
// Note: needs coccinelle 1.1.1 to avoid breaking whitespace
@@
@@
-objs_per_slab_page(
+objs_per_slab(
...
)
{ ... }
@@
@@
-objs_per_slab_page(
+objs_per_slab(
...
)
@@
identifier fn =~ "obj_to_index|objs_per_slab";
@@
fn(...,
- const struct page *page
+ const struct slab *slab
,...)
{
<...
(
- page_address(page)
+ slab_address(slab)
|
- page
+ slab
)
...>
}
@@
identifier fn =~ "nearest_obj";
@@
fn(...,
- struct page *page
+ const struct slab *slab
,...)
{
<...
(
- page_address(page)
+ slab_address(slab)
|
- page
+ slab
)
...>
}
@@
identifier fn =~ "nearest_obj|obj_to_index|objs_per_slab";
expression E;
@@
fn(...,
(
- slab_page(E)
+ E
|
- virt_to_page(E)
+ virt_to_slab(E)
|
- virt_to_head_page(E)
+ virt_to_slab(E)
|
- page
+ page_slab(page)
)
,...)
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <kasan-dev@googlegroups.com>
Cc: <cgroups@vger.kernel.org>
|
|
All the calls to mod_objcg_mlstate(), get_obj_stock() and
put_obj_stock() are done by functions defined within the same "#ifdef
CONFIG_MEMCG_KMEM" compilation block. When CONFIG_MEMCG_KMEM isn't
defined, the following compilation warnings will be issued [1] and [2].
mm/memcontrol.c:785:20: warning: unused function 'mod_objcg_mlstate'
mm/memcontrol.c:2113:33: warning: unused function 'get_obj_stock'
Fix these warning by moving those functions to under the same
CONFIG_MEMCG_KMEM compilation block. There is no functional change.
[1] https://lore.kernel.org/lkml/202111272014.WOYNLUV6-lkp@intel.com/
[2] https://lore.kernel.org/lkml/202111280551.LXsWYt1T-lkp@intel.com/
Link: https://lkml.kernel.org/r/20211129161140.306488-1-longman@redhat.com
Fixes: 559271146efc ("mm/memcg: optimize user context object stock access")
Fixes: 68ac5b3c8db2 ("mm/memcg: cache vmstat data in percpu memcg_stock_pcp")
Signed-off-by: Waiman Long <longman@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a better name. Also add kernel-doc.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
These are only used in built-in core mm code.
Link: https://lkml.kernel.org/r/20210820095815.445392-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "unexport memcg locking helpers".
Neither the old page-based nor the new folio-based memcg locking helpers
are used in modular code at all, so drop the exports.
This patch (of 2):
folio_memcg_{,un}lock are only used in built-in core mm code.
Link: https://lkml.kernel.org/r/20210820095815.445392-1-hch@lst.de
Link: https://lkml.kernel.org/r/20210820095815.445392-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
|
|
Memcg reclaim throttles on congestion if no reclaim progress is made.
This makes little sense, it might be due to writeback or a host of other
factors.
For !memcg reclaim, it's messy. Direct reclaim primarily is throttled
in the page allocator if it is failing to make progress. Kswapd
throttles if too many pages are under writeback and marked for immediate
reclaim.
This patch explicitly throttles if reclaim is failing to make progress.
[vbabka@suse.cz: Remove redundant code]
Link: https://lkml.kernel.org/r/20211022144651.19914-4-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Memory cgroup charging allows killed or exiting tasks to exceed the hard
limit. It is assumed that the amount of the memory charged by those
tasks is bound and most of the memory will get released while the task
is exiting. This is resembling a heuristic for the global OOM situation
when tasks get access to memory reserves. There is no global memory
shortage at the memcg level so the memcg heuristic is more relieved.
The above assumption is overly optimistic though. E.g. vmalloc can
scale to really large requests and the heuristic would allow that. We
used to have an early break in the vmalloc allocator for killed tasks
but this has been reverted by commit b8c8a338f75e ("Revert "vmalloc:
back off when the current task is killed""). There are likely other
similar code paths which do not check for fatal signals in an
allocation&charge loop. Also there are some kernel objects charged to a
memcg which are not bound to a process life time.
It has been observed that it is not really hard to trigger these
bypasses and cause global OOM situation.
One potential way to address these runaways would be to limit the amount
of excess (similar to the global OOM with limited oom reserves). This
is certainly possible but it is not really clear how much of an excess
is desirable and still protects from global OOMs as that would have to
consider the overall memcg configuration.
This patch is addressing the problem by removing the heuristic
altogether. Bypass is only allowed for requests which either cannot
fail or where the failure is not desirable while excess should be still
limited (e.g. atomic requests). Implementation wise a killed or dying
task fails to charge if it has passed the OOM killer stage. That should
give all forms of reclaim chance to restore the limit before the failure
(ENOMEM) and tell the caller to back off.
In addition, this patch renames should_force_charge() helper to
task_is_dying() because now its use is not associated witch forced
charging.
This patch depends on pagefault_out_of_memory() to not trigger
out_of_memory(), because then a memcg failure can unwind to VM_FAULT_OOM
and cause a global OOM killer.
Link: https://lkml.kernel.org/r/8f5cebbb-06da-4902-91f0-6566fc4b4203@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now the kmem states is only used to indicate whether the kmem is
offline. However, we can set ->kmemcg_id to -1 to indicate whether the
kmem is offline. Finally, we can remove the kmem states to simplify the
code.
Link: https://lkml.kernel.org/r/20211025125259.56624-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since slab objects and kmem pages are charged to object cgroup instead
of memory cgroup, memcg_reparent_objcgs() will reparent this cgroup and
all its descendants to its parent cgroup. This already makes further
list_lru_add()'s add elements to the parent's list. So it is
unnecessary to change kmemcg_id of an offline cgroup to its parent's id.
It just wastes CPU cycles. Just remove the redundant code.
Link: https://lkml.kernel.org/r/20211025125102.56533-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The deprecation process of kmem.limit_in_bytes started with the commit
0158115f702 ("memcg, kmem: deprecate kmem.limit_in_bytes") which also
explains in detail the motivation behind the deprecation. To summarize,
it is the unexpected behavior on hitting the kmem limit. This patch
moves the deprecation process to the next stage by disallowing to set
the kmem limit. In future we might just remove the kmem.limit_in_bytes
file completely.
[akpm@linux-foundation.org: s/ENOTSUPP/EOPNOTSUPP/]
[arnd@arndb.de: mark cancel_charge() inline]
Link: https://lkml.kernel.org/r/20211022070542.679839-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20211019153408.2916808-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit d648bcc7fe65 ("mm: kmem: make memcg_kmem_enabled()
irreversible"), the only thing memcg_free_kmem() does is to call
memcg_offline_kmem() when the memcg is still online which can happen
when online_css() fails due to -ENOMEM.
However, the name memcg_free_kmem() is confusing and it is more clear
and straight forward to call memcg_offline_kmem() directly from
mem_cgroup_css_free().
Link: https://lkml.kernel.org/r/20211005202450.11775-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Suggested-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The memcg stats can be flushed in multiple context and potentially in
parallel too. For example multiple parallel user space readers for
memcg stats will contend on the rstat locks with each other. There is
no need for that. We just need one flusher and everyone else can
benefit.
In addition after aa48e47e3906 ("memcg: infrastructure to flush memcg
stats") the kernel periodically flush the memcg stats from the root, so,
the other flushers will potentially have much less work to do.
Link: https://lkml.kernel.org/r/20211001190040.48086-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
At the moment, the kernel flushes the memcg stats on every refault and
also on every reclaim iteration. Although rstat maintains per-cpu
update tree but on the flush the kernel still has to go through all the
cpu rstat update tree to check if there is anything to flush. This
patch adds the tracking on the stats update side to make flush side more
clever by skipping the flush if there is no update.
The stats update codepath is very sensitive performance wise for many
workloads and benchmarks. So, we can not follow what the commit
aa48e47e3906 ("memcg: infrastructure to flush memcg stats") did which
was triggering async flush through queue_work() and caused a lot
performance regression reports. That got reverted by the commit
1f828223b799 ("memcg: flush lruvec stats in the refault").
In this patch we kept the stats update codepath very minimal and let the
stats reader side to flush the stats only when the updates are over a
specific threshold. For now the threshold is (nr_cpus * CHARGE_BATCH).
To evaluate the impact of this patch, an 8 GiB tmpfs file is created on
a system with swap-on-zram and the file was pushed to swap through
memory.force_empty interface. On reading the whole file, the memcg stat
flush in the refault code path is triggered. With this patch, we
observed 63% reduction in the read time of 8 GiB file.
Link: https://lkml.kernel.org/r/20211001190040.48086-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Reviewed-by: "Michal Koutný" <mkoutny@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It is unused after the rework of commit f5df8635c5a3 ("mm: use
find_get_incore_page in memcontrol").
Link: https://lkml.kernel.org/r/20210916193014.80129-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These are the folio equivalents of lock_page_lruvec() and similar
functions. Also convert lruvec_memcg_debug() to take a folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
This replaces mem_cgroup_page_lruvec(). All callers converted.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
This saves dozens of bytes of text by eliminating a lot of calls to
compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
These are the folio equivalents of lock_page_memcg() and
unlock_page_memcg().
lock_page_memcg() and unlock_page_memcg() have too many callers to be
easily replaced in a single patch, so reimplement them as wrappers for
now to be cleaned up later when enough callers have been converted to
use folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The page was only being used for the memcg and to gather trace
information, so this is a simple conversion. The only caller of
mem_cgroup_track_foreign_dirty() will be converted to folios in a later
patch, so doing this now makes that patch simpler.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Convert all callers of mem_cgroup_migrate() to call page_folio() first.
They all look like they're using head pages already, but this proves it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Convert all the callers to call page_folio(). Most of them were already
using a head page, but a few of them I can't prove were, so this may
actually fix a bug.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Use a folio rather than a page to ensure that we're only operating on
base or head pages, and not tail pages.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Convert all callers of mem_cgroup_charge() to call page_folio() on the
page they're currently passing in. Many of them will be converted to
use folios themselves soon.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The memcg_data is only set on the head page, so enforce that by
typing it as a folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
memcg information is only stored in the head page, so the memcg
subsystem needs to assure that all accesses are to the head page.
The first step is converting page_memcg() to folio_memcg().
The callers of page_memcg() and PageMemcgKmem() are not yet ready to be
converted to use folios, so retain them as wrappers around folio_memcg()
and folio_memcg_kmem(). They will be converted in a later patch set.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
memcg_check_events only uses the page's nid, so call page_to_nid in the
callers to make the interface easier to understand.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Opencode this one-line function in its three callers.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
By using the node id in mem_cgroup_update_tree(), we can delete
soft_limit_tree_from_page() and mem_cgroup_page_nodeinfo(). Saves 42
bytes of kernel text on my config.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The last use of 'page' was removed by commit 468c398233da ("mm:
memcontrol: switch to native NR_ANON_THPS counter"), so we can now remove
the parameter from the function.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Prior to the commit 7e1c0d6f5820 ("memcg: switch lruvec stats to rstat")
and the commit aa48e47e3906 ("memcg: infrastructure to flush memcg
stats"), each lruvec memcg stats can be off by (nr_cgroups * nr_cpus *
32) at worst and for unbounded amount of time. The commit aa48e47e3906
moved the lruvec stats to rstat infrastructure and the commit
7e1c0d6f5820 bounded the error for all the lruvec stats to (nr_cpus *
32) at worst for at most 2 seconds. More specifically it decoupled the
number of stats and the number of cgroups from the error rate.
However this reduction in error comes with the cost of triggering the
slowpath of stats update more frequently. Previously in the slowpath
the kernel adds the stats up the memcg tree. After aa48e47e3906, the
kernel triggers the asyn lruvec stats flush through queue_work(). This
causes regression reports from 0day kernel bot [1] as well as from
phoronix test suite [2].
We tried two options to fix the regression:
1) Increase the threshold to trigger the slowpath in lruvec stats
update codepath from 32 to 512.
2) Remove the slowpath from lruvec stats update codepath and instead
flush the stats in the page refault codepath. The assumption is that
the kernel timely flush the stats, so, the update tree would be
small in the refault codepath to not cause the preformance impact.
Following are the results of will-it-scale/page_fault[1|2|3] benchmark
on four settings i.e. (1) 5.15-rc1 as baseline (2) 5.15-rc1 with
aa48e47e3906 and 7e1c0d6f5820 reverted (3) 5.15-rc1 with option-1
(4) 5.15-rc1 with option-2.
test (1) (2) (3) (4)
pg_f1 368563 406277 (10.23%) 399693 (8.44%) 416398 (12.97%)
pg_f2 338399 372133 (9.96%) 369180 (9.09%) 381024 (12.59%)
pg_f3 500853 575399 (14.88%) 570388 (13.88%) 576083 (15.02%)
From the above result, it seems like the option-2 not only solves the
regression but also improves the performance for at least these
benchmarks.
Feng Tang (intel) ran the aim7 benchmark with these two options and
confirms that option-1 reduces the regression but option-2 removes the
regression.
Michael Larabel (phoronix) ran multiple benchmarks with these options
and reported the results at [3] and it shows for most benchmarks
option-2 removes the regression introduced by the commit aa48e47e3906
("memcg: infrastructure to flush memcg stats").
Based on the experiment results, this patch proposed the option-2 as the
solution to resolve the regression.
Link: https://lore.kernel.org/all/20210726022421.GB21872@xsang-OptiPlex-9020 [1]
Link: https://www.phoronix.com/scan.php?page=article&item=linux515-compile-regress [2]
Link: https://openbenchmarking.org/result/2109226-DEBU-LINUX5104 [3]
Fixes: aa48e47e3906 ("memcg: infrastructure to flush memcg stats")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Tested-by: Michael Larabel <Michael@phoronix.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>,
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
|
|
We can get memcg directly form vmpr instead of vmpr->memcg->css->memcg, so
add a new func helper vmpressure_to_memcg(). And no code will use
vmpressure_to_css(), so delete it.
Link: https://lkml.kernel.org/r/20210630112146.455103-1-suhui@zeku.com
Signed-off-by: Hui Su <suhui@zeku.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The memcg->event_list_lock is usually taken in the normal context but when
the userspace closes the corresponding eventfd, eventfd_release through
memcg_event_wake takes memcg->event_list_lock with interrupts disabled.
This is not an issue on its own but it creates a nested dependency from
eventfd_ctx->wqh.lock to memcg->event_list_lock.
Independently, for unrelated eventfd, eventfd_signal() can be called in
the irq context, thus making eventfd_ctx->wqh.lock an irq lock. For
example, FPGA DFL driver, VHOST VPDA driver and couple of VFIO drivers.
This will force memcg->event_list_lock to be an irqsafe lock as well.
One way to break the nested dependency between eventfd_ctx->wqh.lock and
memcg->event_list_lock is to add an indirection. However the simplest
solution would be to make memcg->event_list_lock irqsafe. This is cgroup
v1 feature, is in maintenance and may get deprecated in near future. So,
no need to add more code.
BTW this has been discussed previously [1] but there weren't irq users of
eventfd_signal() at the time.
[1] https://www.spinics.net/lists/cgroups/msg06248.html
Link: https://lkml.kernel.org/r/20210830172953.207257-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Thomas and Vlastimil have noticed that the comment in drain_local_stock
doesn't quite make sense. It talks about a synchronization with the
memory hotplug but there is no actual memory hotplug involvement here. I
meant to talk about cpu hotplug here. Fix that up and hopefuly make the
comment more helpful by referencing the cpu hotplug callback as well.
Link: https://lkml.kernel.org/r/YRDwOhVglJmY7ES5@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add 'else' to save some atomic ops in obj_stock_flush_required() when
flush is already true. No functional change intended here.
Link: https://lkml.kernel.org/r/20210807082835.61281-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit c843966c556d ("mm: allow swappiness that prefers reclaiming
anon over the file workingset") has expended the swappiness value to make
swap to be preferred in some systems. We should also change the memcg
swappiness restriction to allow memcg swap-preferred.
Link: https://lkml.kernel.org/r/d77469b90c45c49953ccbc51e54a1d465bc18f70.1627626255.git.baolin.wang@linux.alibaba.com
Fixes: c843966c556d ("mm: allow swappiness that prefers reclaiming anon over the file workingset")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
set_active_memcg() uses in_interrupt() check to select proper storage for
cgroup: pointer on task struct or per-cpu pointer.
It isn't fully correct: obsoleted in_interrupt() includes tasks with
disabled BH. It's better to use '!in_task()' instead.
Link: https://lkml.org/lkml/2021/7/26/487
Link: https://lkml.kernel.org/r/ed4448b0-4970-616f-7368-ef9dd3cb628d@virtuozzo.com
Fixes: 37d5985c003d ("mm: kmem: prepare remote memcg charging infra for interrupt contexts")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
At the moment memcg stats are read in four contexts:
1. memcg stat user interfaces
2. dirty throttling
3. page fault
4. memory reclaim
Currently the kernel flushes the stats for first two cases. Flushing the
stats for remaining two casese may have performance impact. Always
flushing the memcg stats on the page fault code path may negatively
impacts the performance of the applications. In addition flushing in the
memory reclaim code path, though treated as slowpath, can become the
source of contention for the global lock taken for stat flushing because
when system or memcg is under memory pressure, many tasks may enter the
reclaim path.
This patch uses following mechanisms to solve these challenges:
1. Periodically flush the stats from root memcg every 2 seconds. This
will time limit the out of sync stats.
2. Asynchronously flush the stats after fixed number of stat updates.
In the worst case the stat can be out of sync by O(nr_cpus * BATCH) for
2 seconds.
3. For avoiding thundering herd to flush the stats particularly from
the memory reclaim context, introduce memcg local spinlock and let only
one flusher active at a time. This could have been done through
cgroup_rstat_lock lock but that lock is used by other subsystem and for
userspace reading memcg stats. So, it is better to keep flushers
introduced by this patch decoupled from cgroup_rstat_lock. However we
would have to use irqsafe version of rstat flush but that is fine as
this code path will be flushing for whole tree and do the work for
everyone. No one will be waiting for that worker.
[shakeelb@google.com: fix sleep-in-wrong context bug]
Link: https://lkml.kernel.org/r/20210716212137.1391164-2-shakeelb@google.com
Link: https://lkml.kernel.org/r/20210714013948.270662-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The commit 2d146aa3aa84 ("mm: memcontrol: switch to rstat") switched memcg
stats to rstat infrastructure but skipped the conversion of the lruvec
stats as such stats are read in the performance critical code paths and
flushing stats may have impacted the performances of the applications.
This patch converts the lruvec stats to rstat and later patches add
mechanisms to keep the performance impact to minimum.
The rstat conversion comes with the price i.e. memory cost. Effectively
this patch reverts the savings done by the commit f3344adf38bd ("mm:
memcontrol: optimize per-lruvec stats counter memory usage"). However
this cost is justified due to negative impact of the inaccurate lruvec
stats on many heuristics. One such case is reported in [1].
The memory reclaim code is filled with plethora of heuristics and many of
those heuristics reads the lruvec stats. So, inaccurate stats can make
such heuristics ineffective. [1] reports the impact of inaccurate lruvec
stats on the "cache trim mode" heuristic. Inaccurate lruvec stats can
impact the deactivation and aging anon heuristics as well.
[1] https://lore.kernel.org/linux-mm/20210311004449.1170308-1-ying.huang@intel.com/
Link: https://lkml.kernel.org/r/20210716212137.1391164-1-shakeelb@google.com
Link: https://lkml.kernel.org/r/20210714013948.270662-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Inline mem_cgroup_try_charge_swap, mem_cgroup_uncharge_swap and
cgroup_throttle_swaprate functions to perform mem_cgroup_disabled static
key check inline before calling the main body of the function. This
minimizes the memcg overhead in the pagefault and exit_mmap paths when
memcgs are disabled using cgroup_disable=memory command-line option. This
change results in ~1% overhead reduction when running PFT test [1]
comparing {CONFIG_MEMCG=n} against {CONFIG_MEMCG=y, cgroup_disable=memory}
configuration on an 8-core ARM64 Android device.
[1] https://lkml.org/lkml/2006/8/29/294 also used in mmtests suite
Link: https://lkml.kernel.org/r/20210713010934.299876-3-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
