| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- 'reserve_mem' command line parameter to allow creation of named
memory reservation at boot time.
The driving use-case is to improve the ability of pstore to retain
ramoops data across reboots.
- cleanups and small improvements in memblock and mm_init
- new tests cases in memblock test suite
* tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: fix implicit declaration of function 'numa_valid_node'
memblock: Move late alloc warning down to phys alloc
pstore/ramoops: Add ramoops.mem_name= command line option
mm/memblock: Add "reserve_mem" to reserved named memory at boot up
mm/mm_init.c: don't initialize page->lru again
mm/mm_init.c: not always search next deferred_init_pfn from very beginning
mm/mm_init.c: use deferred_init_mem_pfn_range_in_zone() to decide loop condition
mm/mm_init.c: get the highest zone directly
mm/mm_init.c: move nr_initialised reset down a bit
mm/memblock: fix a typo in description of for_each_mem_region()
mm/mm_init.c: use memblock_region_memory_base_pfn() to get startpfn
mm/memblock: use PAGE_ALIGN_DOWN to get pgend in free_memmap
mm/memblock: return true directly on finding overlap region
memblock tests: add memblock_overlaps_region_checks
mm/memblock: fix comment for memblock_isolate_range()
memblock tests: add memblock_reserve_many_may_conflict_check()
memblock tests: add memblock_reserve_all_locations_check()
mm/memblock: remove empty dummy entry
|
|
If a driver/subsystem tries to do an allocation after the memblock
allocations have been freed and the memory handed to the buddy
allocator, it will not actually be legal to use that allocation: the
buddy allocator owns the memory. Currently this mis-use is handled by
the memblock function which does allocations and returns virtual
addresses by printing a warning and doing a kmalloc instead. However
the physical allocation function does not to do this check - callers of
the physical alloc function are unprotected against mis-use.
Improve the error catching here by moving the check into the physical
allocation function which is used by the virtual addr allocation
function.
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alex Graf <graf@amazon.de>
Link: https://lore.kernel.org/r/20240619095555.85980-1-jgowans@amazon.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
In order to allow for requesting a memory region that can be used for
things like pstore on multiple machines where the memory layout is not the
same, add a new option to the kernel command line called "reserve_mem".
The format is: reserve_mem=nn:align:name
Where it will find nn amount of memory at the given alignment of align.
The name field is to allow another subsystem to retrieve where the memory
was found. For example:
reserve_mem=12M:4096:oops ramoops.mem_name=oops
Where ramoops.mem_name will tell ramoops that memory was reserved for it
via the reserve_mem option and it can find it by calling:
if (reserve_mem_find_by_name("oops", &start, &size)) {
// start holds the start address and size holds the size given
This is typically used for systems that do not wipe the RAM, and this
command line will try to reserve the same physical memory on soft reboots.
Note, it is not guaranteed to be the same location. For example, if KASLR
places the kernel at the location of where the RAM reservation was from a
previous boot, the new reservation will be at a different location. Any
subsystem using this feature must add a way to verify that the contents of
the physical memory is from a previous boot, as there may be cases where
the memory will not be located at the same location.
Not all systems may work either. There could be bit flips if the reboot
goes through the BIOS. Using kexec to reboot the machine is likely to
have better results in such cases.
Link: https://lore.kernel.org/all/ZjJVnZUX3NZiGW6q@kernel.org/
Suggested-by: Mike Rapoport <rppt@kernel.org>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240613155527.437020271@goodmis.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Introduce numa_valid_node(nid) that verifies that nid is a valid node ID
and use that instead of comparing nid parameter with either NUMA_NO_NODE
or MAX_NUMNODES.
This makes the checks for valid node IDs consistent and more robust and
allows to get rid of multiple WARNings.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Leverage the macro PAGE_ALIGN_DOWN to get pgend.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240507075833.6346-7-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Not necessary to break and check i against type->cnt again.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240507075833.6346-6-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
The isolated range is [*@start_rgn, *@end_rgn - 1], while the comment says
"the end region inside the range" is *@end_rgn.
Let's correct it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240507075833.6346-4-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
The dummy entry is introduced in the initial implementation of lmb in
commit 7c8c6b9776fb ("powerpc: Merge lmb.c and make MM initialization
use it.").
As the comment says the empty dummy entry is to simplify the code.
/* Create a dummy zero size LMB which will get coalesced away later.
* This simplifies the lmb_add() code below...
*/
While current code is reimplemented by Tejun in commit 784656f9c680
("memblock: Reimplement memblock_add_region()"). This empty dummy entry
seems not benefit the code any more.
Let's remove it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Paul Mackerras <paulus@ozlabs.org>
CC: Tejun Heo <tj@kernel.org>
CC: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240405015821.13411-1-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
On an (old) x86 system with SRAT just covering space above 4Gb:
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0xfffffffff] hotplug
the commit referenced below leads to this NUMA configuration no longer
being refused by a CONFIG_NUMA=y kernel (previously
NUMA: nodes only cover 6144MB of your 8185MB e820 RAM. Not used.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
was seen in the log directly after the message quoted above), because of
memblock_validate_numa_coverage() checking for NUMA_NO_NODE (only). This
in turn led to memblock_alloc_range_nid()'s warning about MAX_NUMNODES
triggering, followed by a NULL deref in memmap_init() when trying to
access node 64's (NODE_SHIFT=6) node data.
To compensate said change, make memblock_set_node() warn on and adjust
a passed in value of MAX_NUMNODES, just like various other functions
already do.
Fixes: ff6c3d81f2e8 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1c8a058c-5365-4f27-a9f1-3aeb7fb3e7b2@suse.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of significant fixes for the CXL subsystem.
The largest change in this set, that bordered on "new development", is
the fix for the fact that the location of the new qos_class attribute
did not match the Documentation. The fix ends up deleting more code
than it added, and it has a new unit test to backstop basic errors in
this interface going forward. So the "red-diff" and unit test saved
the "rip it out and try again" response.
In contrast, the new notification path for firmware reported CXL
errors (CXL CPER notifications) has a locking context bug that can not
be fixed with a red-diff. Given where the release cycle stands, it is
not comfortable to squeeze in that fix in these waning days. So, that
receives the "back it out and try again later" treatment.
There is a regression fix in the code that establishes memory NUMA
nodes for platform CXL regions. That has an ack from x86 folks. There
are a couple more fixups for Linux to understand (reassemble) CXL
regions instantiated by platform firmware. The policy around platforms
that do not match host-physical-address with system-physical-address
(i.e. systems that have an address translation mechanism between the
address range reported in the ACPI CEDT.CFMWS and endpoint decoders)
has been softened to abort driver load rather than teardown the memory
range (can cause system hangs). Lastly, there is a robustness /
regression fix for cases where the driver would previously continue in
the face of error, and a fixup for PCI error notification handling.
Summary:
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9"
* tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Fix load failures due to single window creation failure
acpi/ghes: Remove CXL CPER notifications
cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
cxl/test: Add support for qos_class checking
cxl: Fix sysfs export of qos_class for memdev
cxl: Remove unnecessary type cast in cxl_qos_class_verify()
cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf'
cxl/region: Allow out of order assembly of autodiscovered regions
cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
x86/numa: Fix the sort compare func used in numa_fill_memblks()
x86/numa: Fix the address overlap check in numa_fill_memblks()
cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
|
|
The commit 77e6c43e137c ("memblock: introduce MEMBLOCK_RSRV_NOINIT flag")
skipped adding this newly introduced memblock flag into flagname[] array,
thus preventing a correct memblock flags output for applicable memblock
regions.
Link: https://lkml.kernel.org/r/20240209030912.1382251-1-anshuman.khandual@arm.com
Fixes: 77e6c43e137c ("memblock: introduce MEMBLOCK_RSRV_NOINIT flag")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
numa_fill_memblks() fills in the gaps in numa_meminfo memblks over a
physical address range. To do so, it first creates a list of existing
memblks that overlap that address range. The issue is that it is off
by one when comparing to the end of the address range, so memblks
that do not overlap are selected.
The impact of selecting a memblk that does not actually overlap is
that an existing memblk may be filled when the expected action is to
do nothing and return NUMA_NO_MEMBLK to the caller. The caller can
then add a new NUMA node and memblk.
Replace the broken open-coded search for address overlap with the
memblock helper memblock_addrs_overlap(). Update the kernel doc
and in code comments.
Suggested by: "Huang, Ying" <ying.huang@intel.com>
Fixes: 8f012db27c95 ("x86/numa: Introduce numa_fill_memblks()")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/10a3e6109c34c21a8dd4c513cf63df63481a2b07.1705085543.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix crash when reserved memory is not added to memory.
When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization
of reserved pages may cause access of NODE_DATA() with invalid nid and
crash.
Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages()
to ensure a valid node id is always passed to init_reserved_page()"
* tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix crash when reserved memory is not added to memory
|
|
After commit 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")
nid of a reserved region is used by init_reserved_page() (with
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y) to access node strucure.
In many cases the nid of the reserved memory is not set and this causes
a crash.
When the nid of a reserved region is not set, fall back to
early_pfn_to_nid(), so that nid of the first_online_node will be passed
to init_reserved_page().
Fixes: 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20240118061853.2652295-1-yajun.deng@linux.dev
[rppt: massaged the commit message]
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock update from Mike Rapoport:
"Code readability improvement.
Use NUMA_NO_NODE instead of -1 as return value of
memblock_search_pfn_nid() to improve code readability
and consistency with the callers of that function"
* tag 'memblock-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Return NUMA_NO_NODE instead of -1 to improve code readability
|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Sanity check that makes sure the nodes cover all memory loops over
numa_meminfo to count the pages that have node id assigned by the
firmware, then loops again over memblock.memory to find the total amount
of memory and in the end checks that the difference between the total
memory and memory that covered by nodes is less than some threshold.
Worse, the loop over numa_meminfo calls __absent_pages_in_range() that
also partially traverses memblock.memory.
It's much simpler and more efficient to have a single traversal of
memblock.memory that verifies that amount of memory not covered by nodes
is less than a threshold.
Introduce memblock_validate_numa_coverage() that does exactly that and use
it instead of numa_meminfo_cover_memory().
Link: https://lkml.kernel.org/r/20231026020329.327329-1-zhiguangni01@gmail.com
Signed-off-by: Liam Ni <zhiguangni01@gmail.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Feiyang Chen <chenfeiyang@loongson.cn>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When no corresponding memory region is found for the given pfn, return
NUMA_NO_NODE instead of -1. This improves code readability and aligns with
the existing logic of the memblock_search_pfn_nid() function's user.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Link: https://lore.kernel.org/r/20231207131001.224914-1-ytcoode@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock update from Mike Rapoport:
"Report failures when memblock_can_resize is not set.
Numerous memblock reservations at early boot may exhaust static
memblock.reserved array and it is unnoticed because most of the
callers don't check memblock_reserve() return value.
In this case the system will crash later, but the reason is hard to
identify.
Replace return of an error with panic() when memblock.reserved is
exhausted before it can be resized"
* tag 'memblock-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: report failures when memblock_can_resize is not set
|
|
For reserved memory regions marked with this flag, reserve_bootmem_region
is not called during memmap_init_reserved_pages. This can be used to
avoid struct page initialization for regions which won't need them, for
e.g. hugepages with Hugepage Vmemmap Optimization enabled.
Link: https://lkml.kernel.org/r/20230913105401.519709-4-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This allows setting flags to both memblock types and is in preparation for
setting flags (for e.g. to not initialize struct pages) on reserved
memory region.
[usama.arif@bytedance.com: add missing argument definition]
Link: https://lkml.kernel.org/r/20230918090657.220463-1-usama.arif@bytedance.com
Link: https://lkml.kernel.org/r/20230913105401.519709-3-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The callers of memblock_reserve() do not check the return value
presuming that memblock_reserve() always succeeds, but there are
cases where it may fail.
Having numerous memblock reservations at early boot where
memblock_can_resize is unset may exhaust the INIT_MEMBLOCK_REGIONS sized
memblock.reserved regions array and an attempt to double this array via
memblock_double_array() will fail and will return -1 to the caller.
When this happens the system crashes anyway, but it's hard to identify
the reason for the crash.
Add a panic message to memblock_double_array() to aid debugging of the
cases when too many regions are reserved before memblock can resize
memblock.reserved array.
Link: https://lore.kernel.org/linux-kernel/20230614131746.3670303-1-songshuaishuai@tinylab.org/
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/r/20230624032607.921173-1-songshuaishuai@tinylab.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
For system with kernelcore=mirror enabled while no mirrored memory is
reported by efi. This could lead to kernel OOM during startup since all
memory beside zone DMA are in the movable zone and this prevents the
kernel to use it.
Zone DMA/DMA32 initialization is independent of mirrored memory and their
max pfn is set in zone_sizes_init(). Since kernel can fallback to zone
DMA/DMA32 if there is no memory in zone Normal, these zones are seen as
mirrored memory no mather their memory attributes are.
To solve this problem, disable kernelcore=mirror when there is no real
mirrored memory exists.
Link: https://lkml.kernel.org/r/20230802072328.2107981-1-mawupeng1@huawei.com
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Suggested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Levi Yun <ppbuk5246@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
UAF"
This reverts commit 9e46e4dcd9d6cd88342b028dbfa5f4fb7483d39c.
kbuild reports a warning in memblock_remove_region() because of a false
positive caused by partial reset of the memblock state.
Doing the full reset will remove the false positives, but will allow
late use of memblock_free() to go unnoticed, so it is better to revert
the offending commit.
WARNING: CPU: 0 PID: 1 at mm/memblock.c:352 memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1))
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00001-g9e46e4dcd9d6 #2
RIP: 0010:memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1))
Call Trace:
memblock_discard (kbuild/src/x86_64/mm/memblock.c:383)
page_alloc_init_late (kbuild/src/x86_64/include/linux/find.h:208 kbuild/src/x86_64/include/linux/nodemask.h:266 kbuild/src/x86_64/mm/mm_init.c:2405)
kernel_init_freeable (kbuild/src/x86_64/init/main.c:1325 kbuild/src/x86_64/init/main.c:1546)
kernel_init (kbuild/src/x86_64/init/main.c:1439)
ret_from_fork (kbuild/src/x86_64/arch/x86/kernel/process.c:145)
ret_from_fork_asm (kbuild/src/x86_64/arch/x86/entry/entry_64.S:298)
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202307271656.447aa17e-oliver.sang@intel.com
Signed-off-by: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The memblock_discard function frees the memblock.reserved.regions
array, which is good.
However, if a subsequent memblock_free (or memblock_phys_free) comes
in later, from for example ima_free_kexec_buffer, that will result in
a use after free bug in memblock_isolate_range.
When running a kernel with CONFIG_KASAN enabled, this will cause a
kernel panic very early in boot. Without CONFIG_KASAN, there is
a chance that memblock_isolate_range might scribble on memory
that is now in use by somebody else.
Avoid those issues by making sure that memblock_discard points
memblock.reserved.regions back at the static buffer.
If memblock_free is called after memblock memory is discarded, that will
print a warning in memblock_remove_region.
Signed-off-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20230719154137.732d8525@imladris.surriel.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- add test for memblock_alloc_node()
- minor coding style fixes
- add flags and nid info in memblock debugfs
* tag 'memblock-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Update nid info in memblock debugfs
memblock: Add flags and nid info in memblock debugfs
Fix some coding style errors in memblock.c
Add tests for memblock_alloc_node()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
|
|
early_pfn_to_nid() is called frequently in init_reserved_page(), it
returns the node id of the PFN. These PFN are probably from the same
memory region, they have the same node id. It's not necessary to call
early_pfn_to_nid() for each PFN.
Pass nid to reserve_bootmem_region() and drop the call to
early_pfn_to_nid() in init_reserved_page(). Also, set nid on all reserved
pages before doing this, as some reserved memory regions may not be set
nid.
The most beneficial function is memmap_init_reserved_pages() if
CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled.
The following data was tested on an x86 machine with 190GB of RAM.
before:
memmap_init_reserved_pages() 67ms
after:
memmap_init_reserved_pages() 20ms
Link: https://lkml.kernel.org/r/20230619023406.424298-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
managed pages has already been set to 0 in free_area_init_core_hotplug(),
via zone_init_internals() on each zone. It's pointless to reset again.
Furthermore, reset_node_managed_pages() no longer needs to be exposed
outside of mm/memblock.c. Remove declaration in include/linux/memblock.h
and define it as static.
In addtion to this, the only caller of reset_node_managed_pages() is
reset_all_zones_managed_pages(), which is annotated with __init, so it
should be safe to also mark reset_node_managed_pages() as __init.
Link: https://lkml.kernel.org/r/20230607024548.1240-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
|
|
The node id for memblock reserved regions will be wrong,
so let's show 'x' for reg->nid == MAX_NUMNODES in debugfs to keep it align.
Suggested-by: Mike Rapoport (IBM) <rppt@kernel.org>
Co-developed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Yuwei Guan <ssawgyw@gmail.com>
Link: https://lore.kernel.org/r/20230601133149.37160-1-ssawgyw@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Currently, the memblock debugfs can display the count of memblock_type and
the base and end of the reg. However, when memblock_mark_*() or
memblock_set_node() is executed on some range, the information in the
existing debugfs cannot make it clear why the address is not consecutive.
For example,
cat /sys/kernel/debug/memblock/memory
0: 0x0000000080000000..0x00000000901fffff
1: 0x0000000090200000..0x00000000905fffff
2: 0x0000000090600000..0x0000000092ffffff
3: 0x0000000093000000..0x00000000973fffff
4: 0x0000000097400000..0x00000000b71fffff
5: 0x00000000c0000000..0x00000000dfffffff
6: 0x00000000e2500000..0x00000000f87fffff
7: 0x00000000f8800000..0x00000000fa7fffff
8: 0x00000000fa800000..0x00000000fd3effff
9: 0x00000000fd3f0000..0x00000000fd3fefff
10: 0x00000000fd3ff000..0x00000000fd7fffff
11: 0x00000000fd800000..0x00000000fd901fff
12: 0x00000000fd902000..0x00000000fd909fff
13: 0x00000000fd90a000..0x00000000fd90bfff
14: 0x00000000fd90c000..0x00000000ffffffff
15: 0x0000000880000000..0x0000000affffffff
So we can add flags and nid to this debugfs.
For example,
cat /sys/kernel/debug/memblock/memory
0: 0x0000000080000000..0x00000000901fffff 0 NONE
1: 0x0000000090200000..0x00000000905fffff 0 NOMAP
2: 0x0000000090600000..0x0000000092ffffff 0 NONE
3: 0x0000000093000000..0x00000000973fffff 0 NOMAP
4: 0x0000000097400000..0x00000000b71fffff 0 NONE
5: 0x00000000c0000000..0x00000000dfffffff 0 NONE
6: 0x00000000e2500000..0x00000000f87fffff 0 NONE
7: 0x00000000f8800000..0x00000000fa7fffff 0 NOMAP
8: 0x00000000fa800000..0x00000000fd3effff 0 NONE
9: 0x00000000fd3f0000..0x00000000fd3fefff 0 NOMAP
10: 0x00000000fd3ff000..0x00000000fd7fffff 0 NONE
11: 0x00000000fd800000..0x00000000fd901fff 0 NOMAP
12: 0x00000000fd902000..0x00000000fd909fff 0 NONE
13: 0x00000000fd90a000..0x00000000fd90bfff 0 NOMAP
14: 0x00000000fd90c000..0x00000000ffffffff 0 NONE
15: 0x0000000880000000..0x0000000affffffff 0 NONE
Signed-off-by: Yuwei Guan <ssawgyw@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20230519105321.333-1-ssawgyw@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
This patch removes the initialization of some static variables to 0 and
`false` in the memblock source file, according to the coding style
guidelines.
Signed-off-by: Claudio Migliorelli <claudio.migliorelli@mail.polimi.it>
Link: https://lore.kernel.org/r/87r0sa7mm8.fsf@mail.polimi.it
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") results in
various boot failures (hang) on arm targets Debug messages reveal the
reason.
########### MAX_ORDER=10 start=0 __ffs(start)=-1 min()=10 min_t=-1
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If start==0, __ffs(start) returns 0xfffffff or (as int) -1, which min_t()
interprets as such, while min() apparently uses the returned unsigned long
value. Obviously a negative order isn't received well by the rest of the
code.
[akpm@linux-foundation.org: fix comment, per Mike]
Link: https://lkml.kernel.org/r/ZDBa7HWZK69dKKzH@kernel.org
Link: https://lkml.kernel.org/r/20230406072529.vupqyrzqnhyozeyh@box.shutemov.name
Fixes: 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely")
Signed-off-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/9460377a-38aa-4f39-ad57-fb73725f92db@roeck-us.net
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MAX_ORDER currently defined as number of orders page allocator supports:
user can ask buddy allocator for page order between 0 and MAX_ORDER-1.
This definition is counter-intuitive and lead to number of bugs all over
the kernel.
Change the definition of MAX_ORDER to be inclusive: the range of orders
user can ask from buddy allocator is 0..MAX_ORDER now.
[kirill@shutemov.name: fix min() warning]
Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box
[akpm@linux-foundation.org: fix another min_t warning]
[kirill@shutemov.name: fixups per Zi Yan]
Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name
[akpm@linux-foundation.org: fix underlining in docs]
Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Small optimizations:
- fix off-by-one in the check whether memblock_add_range() should
reallocate memory to accommodate newly inserted range
- check only for relevant regions in memblock_merge_regions() rather
than swipe over the entire array"
* tag 'memblock-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Avoid useless checks in memblock_merge_regions().
memblock: Make a boundary tighter in memblock_add_range().
|
|
memblock_free_late()."
This reverts commit 115d9d77bb0f9152c60b6e8646369fa7f6167593.
The pages being freed by memblock_free_late() have already been
initialized, but if they are in the deferred init range,
__free_one_page() might access nearby uninitialized pages when trying to
coalesce buddies. This can, for example, trigger this BUG:
BUG: unable to handle page fault for address: ffffe964c02580c8
RIP: 0010:__list_del_entry_valid+0x3f/0x70
<TASK>
__free_one_page+0x139/0x410
__free_pages_ok+0x21d/0x450
memblock_free_late+0x8c/0xb9
efi_free_boot_services+0x16b/0x25c
efi_enter_virtual_mode+0x403/0x446
start_kernel+0x678/0x714
secondary_startup_64_no_verify+0xd2/0xdb
</TASK>
A proper fix will be more involved so revert this change for the time
being.
Fixes: 115d9d77bb0f ("mm: Always release pages to the buddy allocator in memblock_free_late().")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/20230207082151.1303-1-dev@aaront.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
memblock_merge_regions() is called after regions have been modified to
merge the neighboring compatible regions. That will check all regions
but most checks are useless.
Most of the time we only insert one or a few new regions, or modify one or
a few regions. At this time, we don't need to check all the regions. We
only need to check the changed regions, because other not related regions
cannot be merged.
Add two parameters to memblock_merge_regions() to indicate the lower and
upper boundary to scan.
Debug code that counts the number of total iterations in
memblock_merge_regions(), like for instance
void memblock_merge_regions(struct memblock_type *type)
{
static int iteration_count = 0;
static int max_nr_regions = 0;
max_nr_regions = max(max_nr_regions, (int)type->cnt);
...
while () {
iteration_count++;
...
}
pr_info("iteration_count: %d max_nr_regions %d", iteration_count,
max_nr_regions);
}
Produces the following numbers on a physical machine with 1T of memory:
before: [2.472243] iteration_count: 45410 max_nr_regions 178
after: [2.470869] iteration_count: 923 max_nr_regions 176
The actual startup speed seems to change little, but it does reduce the
scan overhead.
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Link: https://lore.kernel.org/r/20230129090034.12310-3-zhangpeng.00@bytedance.com
[rppt: massaged the changelog]
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
When type->cnt * 2 + 1 is less than or equal to type->max, there is
enough empty regions to insert.
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Link: https://lore.kernel.org/r/20230129090034.12310-2-zhangpeng.00@bytedance.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages
Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
memblock_phys_free() is the counterpart to memblock_phys_alloc.
Change memblock_alloc_xx() with memblock_phys_alloc_xx() to keep
consistency.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20221216100304.688209-1-linmq006@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Add pageblock_align() macro and use it to simplify code.
Link: https://lkml.kernel.org/r/20220907060844.126891-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move pageblock_start_pfn/pageblock_end_pfn() into pageblock-flags.h, then
they could be used somewhere else, not only in compaction, also use
ALIGN_DOWN() instead of round_down() to be pair with ALIGN(), which should
be same for pageblock usage.
Link: https://lkml.kernel.org/r/20220907060844.126891-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- An optimization in memblock_add_range() to reduce array traversals
- Improvements to the memblock test suite
* tag 'memblock-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock test: Modify the obsolete description in README
memblock tests: fix compilation errors
memblock tests: change build options to run-time options
memblock tests: remove completed TODO items
memblock tests: set memblock_debug to enable memblock_dbg() messages
memblock tests: add verbose output to memblock tests
memblock tests: Makefile: add arguments to control verbosity
memblock: avoid some repeat when add new range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
|
In a system(Huawei Ascend ARM64 SoC) using HBM, a multi-bit ECC error
occurs, and the BIOS will mark the corresponding area (for example, 2 MB)
as unusable. When the system restarts next time, these areas are not
reported or reported as EFI_UNUSABLE_MEMORY. Both cases lead to an
increase in the number of memblocks, whereas EFI_UNUSABLE_MEMORY leads to
a larger number of memblocks.
For example, if the EFI_UNUSABLE_MEMORY type is reported:
...
memory[0x92] [0x0000200834a00000-0x0000200835bfffff], 0x0000000001200000 bytes on node 7 flags: 0x0
memory[0x93] [0x0000200835c00000-0x0000200835dfffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x94] [0x0000200835e00000-0x00002008367fffff], 0x0000000000a00000 bytes on node 7 flags: 0x0
memory[0x95] [0x0000200836800000-0x00002008369fffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x96] [0x0000200836a00000-0x0000200837bfffff], 0x0000000001200000 bytes on node 7 flags: 0x0
memory[0x97] [0x0000200837c00000-0x0000200837dfffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x98] [0x0000200837e00000-0x000020087fffffff], 0x0000000048200000 bytes on node 7 flags: 0x0
memory[0x99] [0x0000200880000000-0x0000200bcfffffff], 0x0000000350000000 bytes on node 6 flags: 0x0
memory[0x9a] [0x0000200bd0000000-0x0000200bd01fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9b] [0x0000200bd0200000-0x0000200bd07fffff], 0x0000000000600000 bytes on node 6 flags: 0x0
memory[0x9c] [0x0000200bd0800000-0x0000200bd09fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9d] [0x0000200bd0a00000-0x0000200fcfffffff], 0x00000003ff600000 bytes on node 6 flags: 0x0
memory[0x9e] [0x0000200fd0000000-0x0000200fd01fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9f] [0x0000200fd0200000-0x0000200fffffffff], 0x000000002fe00000 bytes on node 6 flags: 0x0
...
The EFI memory map is parsed to construct the memblock arrays before the
memblock arrays can be resized. As the result, memory regions beyond
INIT_MEMBLOCK_REGIONS are lost.
Add a new macro INIT_MEMBLOCK_MEMORY_REGIONS to replace
INIT_MEMBLOCK_REGTIONS to define the size of the static memblock.memory
array.
Allow overriding memblock.memory array size with architecture defined
INIT_MEMBLOCK_MEMORY_REGIONS and make arm64 to set
INIT_MEMBLOCK_MEMORY_REGIONS to 1024 when CONFIG_EFI is enabled.
Link: https://lkml.kernel.org/r/20220615102742.96450-1-zhouguanghui1@huawei.com
Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Darren Hart <darren@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org> [arm64]
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Xu Qiang <xuqiang36@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The worst case is that the new memory range overlaps all existing
regions, which requires type->cnt + 1 empty struct memblock_region slots in
the type->regions array.
So if type->cnt + 1 + type->cnt is less than type->max, we can insert
regions directly rather than calculate the needed amount before the
insertion.
And becase of merge operation in the end of function, tpye->cnt will
increase slowly for many cases.
This change allows to avoid unnecessary repeat of memblock ranges traversal
for many cases when adding new memory range.
Signed-off-by: Jinyu Tang <tjytimi@163.com>
[rppt: massaged comment and changelog text]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
|
|
kmemleak_alloc_phys()
Patch series "mm: kmemleak: store objects allocated with physical address
separately and check when scan", v4.
The kmemleak_*_phys() interface uses "min_low_pfn" and "max_low_pfn" to
check address. But on some architectures, kmemleak_*_phys() is called
before those two variables initialized. The following steps will be
taken:
1) Add OBJECT_PHYS flag and rbtree for the objects allocated
with physical address
2) Store physical address in objects if allocated with OBJECT_PHYS
3) Check the boundary when scan instead of in kmemleak_*_phys()
This patch set will solve:
https://lore.kernel.org/r/20220527032504.30341-1-yee.lee@mediatek.com
https://lore.kernel.org/r/9dd08bb5-f39e-53d8-f88d-bec598a08c93@gmail.com
v3: https://lore.kernel.org/r/20220609124950.1694394-1-patrick.wang.shcn@gmail.com
v2: https://lore.kernel.org/r/20220603035415.1243913-1-patrick.wang.shcn@gmail.com
v1: https://lore.kernel.org/r/20220531150823.1004101-1-patrick.wang.shcn@gmail.com
This patch (of 4):
Remove the unused kmemleak_not_leak_phys() function. And remove the
min_count argument to kmemleak_alloc_phys() function, assume it's 0.
Link: https://lkml.kernel.org/r/20220611035551.1823303-1-patrick.wang.shcn@gmail.com
Link: https://lkml.kernel.org/r/20220611035551.1823303-2-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yee Lee <yee.lee@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If system have some mirrored memory and mirrored feature is not specified
in boot parameter, the basic mirrored feature will be enabled and this will
lead to the following situations:
- memblock memory allocation prefers mirrored region. This may have some
unexpected influence on numa affinity.
- contiguous memory will be split into several parts if parts of them
is mirrored memory via memblock_mark_mirror().
To fix this, variable mirrored_kernelcore will be checked in
memblock_mark_mirror(). Mark mirrored memory with flag MEMBLOCK_MIRROR iff
kernelcore=mirror is added in the kernel parameters.
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614092156.1972846-6-mawupeng1@huawei.com
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
If system has mirrored memory, memblock will try to allocate mirrored
memory firstly and fallback to non-mirrored memory when fails, but if with
limited mirrored memory or some numa node without mirrored memory, lots of
warning message about memblock allocation will occur.
This patch ratelimit the warning message to avoid a very long print during
bootup.
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20220614092156.1972846-3-mawupeng1@huawei.com
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
