| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Eryu noticed that he could sometimes get a leftover error reported when
it shouldn't be on fsync with ext2 and non-journalled ext4.
The problem is that writeback_single_inode still uses filemap_fdatawait.
That picks up a previously set AS_EIO flag, which would ordinarily have
been cleared before.
Since we're mostly using this function as a replacement for
filemap_check_errors, have filemap_check_and_advance_wb_err clear AS_EIO
and AS_ENOSPC when reporting an error. That should allow the new
function to better emulate the behavior of the old with respect to these
flags.
Link: http://lkml.kernel.org/r/20170922133331.28812-1-jlayton@kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently when mixing buffered reads and asynchronous direct writes it
is possible to end up with the situation where we have stale data in the
page cache while the new data is already written to disk. This is
permanent until the affected pages are flushed away. Despite the fact
that mixing buffered and direct IO is ill-advised it does pose a thread
for a data integrity, is unexpected and should be fixed.
Fix this by deferring completion of asynchronous direct writes to a
process context in the case that there are mapped pages to be found in
the inode. Later before the completion in dio_complete() invalidate
the pages in question. This ensures that after the completion the pages
in the written area are either unmapped, or populated with up-to-date
data. Also do the same for the iomap case which uses
iomap_dio_complete() instead.
This has a side effect of deferring the completion to a process context
for every AIO DIO that happens on inode that has pages mapped. However
since the consensus is that this is ill-advised practice the performance
implication should not be a problem.
This was based on proposal from Jeff Moyer, thanks!
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull nowait read support from Al Viro:
"Support IOCB_NOWAIT for buffered reads and block devices"
* 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
block_dev: support RFW_NOWAIT on block device nodes
fs: support RWF_NOWAIT for buffered reads
fs: support IOCB_NOWAIT in generic_file_buffered_read
fs: pass iocb to do_generic_file_read
|
|
Now that we have added breaks in the wait queue scan and allow bookmark
on scan position, we put this logic in the wake_up_page_bit function.
We can have very long page wait list in large system where multiple
pages share the same wait list. We break the wake up walk here to allow
other cpus a chance to access the list, and not to disable the interrupts
when traversing the list for too long. This reduces the interrupt and
rescheduling latency, and excessive page wait queue lock hold time.
[ v2: Remove bookmark_wake_function ]
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge updates from Andrew Morton:
- various misc bits
- DAX updates
- OCFS2
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits)
mm,fork: introduce MADV_WIPEONFORK
x86,mpx: make mpx depend on x86-64 to free up VMA flag
mm: add /proc/pid/smaps_rollup
mm: hugetlb: clear target sub-page last when clearing huge page
mm: oom: let oom_reap_task and exit_mmap run concurrently
swap: choose swap device according to numa node
mm: replace TIF_MEMDIE checks by tsk_is_oom_victim
mm, oom: do not rely on TIF_MEMDIE for memory reserves access
z3fold: use per-cpu unbuddied lists
mm, swap: don't use VMA based swap readahead if HDD is used as swap
mm, swap: add sysfs interface for VMA based swap readahead
mm, swap: VMA based swap readahead
mm, swap: fix swap readahead marking
mm, swap: add swap readahead hit statistics
mm/vmalloc.c: don't reinvent the wheel but use existing llist API
mm/vmstat.c: fix wrong comment
selftests/memfd: add memfd_create hugetlbfs selftest
mm/shmem: add hugetlbfs support to memfd_create()
mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups
mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas()
...
|
|
We want only pages from given range in filemap_range_has_page(),
furthermore we want at most a single page.
So use find_get_pages_range() instead of pagevec_lookup() and remove
unnecessary code.
Link: http://lkml.kernel.org/r/20170726114704.7626-10-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Implement a variant of find_get_pages() that stops iterating at given
index. This may be substantial performance gain if the mapping is
sparse. See following commit for details. Furthermore lots of users of
this function (through pagevec_lookup()) actually want a range lookup
and all of them are currently open-coding this.
Also create corresponding pagevec_lookup_range() function.
Link: http://lkml.kernel.org/r/20170726114704.7626-4-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make pagevec_lookup() (and underlying find_get_pages()) update index to
the next page where iteration should continue. Most callers want this
and also pagevec_lookup_tag() already does this.
Link: http://lkml.kernel.org/r/20170726114704.7626-3-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that we no longer insert struct page pointers in DAX radix trees we
can remove the special casing for DAX in page_cache_tree_insert().
This also allows us to make dax_wake_mapping_entry_waiter() local to
fs/dax.c, removing it from dax.h.
Link: http://lkml.kernel.org/r/20170724170616.25810-5-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull writeback error handling updates from Jeff Layton:
"This pile continues the work from last cycle on better tracking
writeback errors. In v4.13 we added some basic errseq_t infrastructure
and converted a few filesystems to use it.
This set continues refining that infrastructure, adds documentation,
and converts most of the other filesystems to use it. The main
exception at this point is the NFS client"
* tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
ecryptfs: convert to file_write_and_wait in ->fsync
mm: remove optimizations based on i_size in mapping writeback waits
fs: convert a pile of fsync routines to errseq_t based reporting
gfs2: convert to errseq_t based writeback error reporting for fsync
fs: convert sync_file_range to use errseq_t based error-tracking
mm: add file_fdatawait_range and file_write_and_wait
fuse: convert to errseq_t based error tracking for fsync
mm: consolidate dax / non-dax checks for writeback
Documentation: add some docs for errseq_t
errseq: rename __errseq_set to errseq_set
|
|
Allow generic_file_buffered_read to bail out early instead of waiting for
the page lock or reading a page if IOCB_NOWAIT is specified.
Signed-off-by: Milosz Tanski <milosz@adfin.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Sage Weil <sage@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
And rename it to the more descriptive generic_file_buffered_read while
at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Commit 3510ca20ece0 ("Minor page waitqueue cleanups") made the page
queue code always add new waiters to the back of the queue, which helps
upcoming patches to batch the wakeups for some horrid loads where the
wait queues grow to thousands of entries.
However, I forgot about the nasrt add_page_wait_queue() special case
code that is only used by the cachefiles code. That one still continued
to add the new wait queue entries at the beginning of the list.
Fix it, because any sane batched wakeup will require that we don't
suddenly start getting new entries at the beginning of the list that we
already handled in a previous batch.
[ The current code always does the whole list while holding the lock, so
wait queue ordering doesn't matter for correctness, but even then it's
better to add later entries at the end from a fairness standpoint ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The "lock_page_killable()" function waits for exclusive access to the
page lock bit using the WQ_FLAG_EXCLUSIVE bit in the waitqueue entry
set.
That means that if it gets woken up, other waiters may have been
skipped.
That, in turn, means that if it sees the page being unlocked, it *must*
take that lock and return success, even if a lethal signal is also
pending.
So instead of checking for lethal signals first, we need to check for
them after we've checked the actual bit that we were waiting for. Even
if that might then delay the killing of the process.
This matches the order of the old "wait_on_bit_lock()" infrastructure
that the page locking used to use (and is still used in a few other
areas).
Note that if we still return an error after having unsuccessfully tried
to acquire the page lock, that is ok: that means that some other thread
was able to get ahead of us and lock the page, and when that other
thread then unlocks the page, the wakeup event will be repeated. So any
other pending waiters will now get properly woken up.
Fixes: 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Tim Chen and Kan Liang have been battling a customer load that shows
extremely long page wakeup lists. The cause seems to be constant NUMA
migration of a hot page that is shared across a lot of threads, but the
actual root cause for the exact behavior has not been found.
Tim has a patch that batches the wait list traversal at wakeup time, so
that we at least don't get long uninterruptible cases where we traverse
and wake up thousands of processes and get nasty latency spikes. That
is likely 4.14 material, but we're still discussing the page waitqueue
specific parts of it.
In the meantime, I've tried to look at making the page wait queues less
expensive, and failing miserably. If you have thousands of threads
waiting for the same page, it will be painful. We'll need to try to
figure out the NUMA balancing issue some day, in addition to avoiding
the excessive spinlock hold times.
That said, having tried to rewrite the page wait queues, I can at least
fix up some of the braindamage in the current situation. In particular:
(a) we don't want to continue walking the page wait list if the bit
we're waiting for already got set again (which seems to be one of
the patterns of the bad load). That makes no progress and just
causes pointless cache pollution chasing the pointers.
(b) we don't want to put the non-locking waiters always on the front of
the queue, and the locking waiters always on the back. Not only is
that unfair, it means that we wake up thousands of reading threads
that will just end up being blocked by the writer later anyway.
Also add a comment about the layout of 'struct wait_page_key' - there is
an external user of it in the cachefiles code that means that it has to
match the layout of 'struct wait_bit_key' in the two first members. It
so happens to match, because 'struct page *' and 'unsigned long *' end
up having the same values simply because the page flags are the first
member in struct page.
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Christopher Lameter <cl@linux.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Marcelo added this i_size based optimization with a patch in 2004
(commitid is from the linux-history tree):
commit 765dad09b4ac101a32d87af2bb793c3060497d3c
Author: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Date: Tue Sep 7 17:51:17 2004 -0700
small wait_on_page_writeback_range() optimization
filemap_fdatawait() calls wait_on_page_writeback_range() with -1
as "end" parameter. This is not needed since we know the EOF
from the inode. Use that instead.
There may be races here, particularly with clustered or network
filesystems. It also seems like a bit of a layering violation since
we're operating on an address_space here, not an inode.
Finally, it's also questionable whether this optimization really helps
on workloads that we care about. Should we be optimizing for writeback
vs. truncate races in a codepath where we expect to wait anyway? It
doesn't seem worth the risk.
Remove this optimization from the filemap_fdatawait codepaths. This
means that filemap_fdatawait becomes a trivial wrapper around
filemap_fdatawait_range.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Necessary now for gfs2_fsync and sync_file_range, but there will
eventually be other callers.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
We have this complex conditional copied to several places. Turn it into
a helper function.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Nothing calls this wrapper anymore, so just remove it and rename the
old function to get rid of the double underscore prefix.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
We avoid calling __mod_node_page_state(NR_FILE_PAGES) for hugetlb page
now, but it's not enough because later code doesn't handle hugetlb
properly. Actually in our testing, WARN_ON_ONCE(PageDirty(page)) at the
end of this function fires for hugetlb, which makes no sense. So we
should return immediately for hugetlb pages.
Link: http://lkml.kernel.org/r/1496305019-5493-3-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/
https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
|
|
Track the following reclaim counters for every memory cgroup: PGREFILL,
PGSCAN, PGSTEAL, PGACTIVATE, PGDEACTIVATE, PGLAZYFREE and PGLAZYFREED.
These values are exposed using the memory.stats interface of cgroup v2.
The meaning of each value is the same as for global counters, available
using /proc/vmstat.
Also, for consistency, rename mem_cgroup_count_vm_event() to
count_memcg_event_mm().
Link: http://lkml.kernel.org/r/1494530183-30808-1-git-send-email-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most filesystems currently use mapping_set_error and
filemap_check_errors for setting and reporting/clearing writeback errors
at the mapping level. filemap_check_errors is indirectly called from
most of the filemap_fdatawait_* functions and from
filemap_write_and_wait*. These functions are called from all sorts of
contexts to wait on writeback to finish -- e.g. mostly in fsync, but
also in truncate calls, getattr, etc.
The non-fsync callers are problematic. We should be reporting writeback
errors during fsync, but many places spread over the tree clear out
errors before they can be properly reported, or report errors at
nonsensical times.
If I get -EIO on a stat() call, there is no reason for me to assume that
it is because some previous writeback failed. The fact that it also
clears out the error such that a subsequent fsync returns 0 is a bug,
and a nasty one since that's potentially silent data corruption.
This patch adds a small bit of new infrastructure for setting and
reporting errors during address_space writeback. While the above was my
original impetus for adding this, I think it's also the case that
current fsync semantics are just problematic for userland. Most
applications that call fsync do so to ensure that the data they wrote
has hit the backing store.
In the case where there are multiple writers to the file at the same
time, this is really hard to determine. The first one to call fsync will
see any stored error, and the rest get back 0. The processes with open
fds may not be associated with one another in any way. They could even
be in different containers, so ensuring coordination between all fsync
callers is not really an option.
One way to remedy this would be to track what file descriptor was used
to dirty the file, but that's rather cumbersome and would likely be
slow. However, there is a simpler way to improve the semantics here
without incurring too much overhead.
This set adds an errseq_t to struct address_space, and a corresponding
one is added to struct file. Writeback errors are recorded in the
mapping's errseq_t, and the one in struct file is used as the "since"
value.
This changes the semantics of the Linux fsync implementation such that
applications can now use it to determine whether there were any
writeback errors since fsync(fd) was last called (or since the file was
opened in the case of fsync having never been called).
Note that those writeback errors may have occurred when writing data
that was dirtied via an entirely different fd, but that's the case now
with the current mapping_set_error/filemap_check_error infrastructure.
This will at least prevent you from getting a false report of success.
The new behavior is still consistent with the POSIX spec, and is more
reliable for application developers. This patch just adds some basic
infrastructure for doing this, and ensures that the f_wb_err "cursor"
is properly set when a file is opened. Later patches will change the
existing code to use this new infrastructure for reporting errors at
fsync time.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
The -EIO returned here can end up overriding whatever error is marked in
the address space, and be returned at fsync time, even when there is a
more appropriate error stored in the mapping.
Read errors are also sometimes tracked on a per-page level using
PG_error. Suppose we have a read error on a page, and then that page is
subsequently dirtied by overwriting the whole page. Writeback doesn't
clear PG_error, so we can then end up successfully writing back that
page and still return -EIO on fsync.
Worse yet, PG_error is cleared during a sync() syscall, but the -EIO
return from that is silently discarded. Any subsystem that is relying on
PG_error to report errors during fsync can easily lose writeback errors
due to this. All you need is a stray sync() call to wait for writeback
to complete and you've lost the error.
Since the handling of the PG_error flag is somewhat inconsistent across
subsystems, let's just rely on marking the address space when there are
writeback errors. Change the TestClearPageError call to ClearPageError,
and make __filemap_fdatawait_range a void return function.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
filemap_write_and_wait{_range} will return an error if writeback
initiation fails, but won't clear errors in the address_space. This is
particularly problematic on DAX, as filemap_fdatawrite* is
effectively synchronous there. Ensure that we clear the AS_EIO/AS_ENOSPC
flags when filemap_fdatawrite* returns an error.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Resetting this flag is almost certainly racy, and will be problematic
with some coming changes.
Make filemap_fdatawait_keep_errors return int, but not clear the flag(s).
Have jbd2 call it instead of filemap_fdatawait and don't attempt to
re-set the error flag if it fails.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Add the SYSTEM_SCHEDULING bootup state to move various scheduler
debug checks earlier into the bootup. This turns silent and
sporadically deadly bugs into nice, deterministic splats. Fix some
of the splats that triggered. (Thomas Gleixner)
- A round of restructuring and refactoring of the load-balancing and
topology code (Peter Zijlstra)
- Another round of consolidating ~20 of incremental scheduler code
history: this time in terms of wait-queue nomenclature. (I didn't
get much feedback on these renaming patches, and we can still
easily change any names I might have misplaced, so if anyone hates
a new name, please holler and I'll fix it.) (Ingo Molnar)
- sched/numa improvements, fixes and updates (Rik van Riel)
- Another round of x86/tsc scheduler clock code improvements, in hope
of making it more robust (Peter Zijlstra)
- Improve NOHZ behavior (Frederic Weisbecker)
- Deadline scheduler improvements and fixes (Luca Abeni, Daniel
Bristot de Oliveira)
- Simplify and optimize the topology setup code (Lauro Ramos
Venancio)
- Debloat and decouple scheduler code some more (Nicolas Pitre)
- Simplify code by making better use of llist primitives (Byungchul
Park)
- ... plus other fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
sched/cputime: Refactor the cputime_adjust() code
sched/debug: Expose the number of RT/DL tasks that can migrate
sched/numa: Hide numa_wake_affine() from UP build
sched/fair: Remove effective_load()
sched/numa: Implement NUMA node level wake_affine()
sched/fair: Simplify wake_affine() for the single socket case
sched/numa: Override part of migrate_degrades_locality() when idle balancing
sched/rt: Move RT related code from sched/core.c to sched/rt.c
sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
sched/fair: Spare idle load balancing on nohz_full CPUs
nohz: Move idle balancer registration to the idle path
sched/loadavg: Generalize "_idle" naming to "_nohz"
sched/core: Drop the unused try_get_task_struct() helper function
sched/fair: WARN() and refuse to set buddy when !se->on_rq
sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
...
|
|
Find out if the I/O will trigger a wait due to writeback. If yes,
return -EAGAIN.
Return -EINVAL for buffered AIO: there are multiple causes of
delay such as page locks, dirty throttling logic, page loading
from disk etc. which cannot be taken care of.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
filemap_range_has_page() return true if the file's mapping has
a page within the range mentioned. This function will be used
to check if a write() call will cause a writeback of previous
writes.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
So I've noticed a number of instances where it was not obvious from the
code whether ->task_list was for a wait-queue head or a wait-queue entry.
Furthermore, there's a number of wait-queue users where the lists are
not for 'tasks' but other entities (poll tables, etc.), in which case
the 'task_list' name is actively confusing.
To clear this all up, name the wait-queue head and entry list structure
fields unambiguously:
struct wait_queue_head::task_list => ::head
struct wait_queue_entry::task_list => ::entry
For example, this code:
rqw->wait.task_list.next != &wait->task_list
... is was pretty unclear (to me) what it's doing, while now it's written this way:
rqw->wait.head.next != &wait->entry
... which makes it pretty clear that we are iterating a list until we see the head.
Other examples are:
list_for_each_entry_safe(pos, next, &x->task_list, task_list) {
list_for_each_entry(wq, &fence->wait.task_list, task_list) {
... where it's unclear (to me) what we are iterating, and during review it's
hard to tell whether it's trying to walk a wait-queue entry (which would be
a bug), while now it's written as:
list_for_each_entry_safe(pos, next, &x->head, entry) {
list_for_each_entry(wq, &fence->wait.head, entry) {
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fix from Al Viro:
"Braino fix for iov_iter_revert() misuse"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix braino in generic_file_read_iter()
|
|
Commit afddba49d18f ("fs: introduce write_begin, write_end, and
perform_write aops") introduced AOP_FLAG_UNINTERRUPTIBLE flag which was
checked in pagecache_write_begin(), but that check was removed by
4e02ed4b4a2f ("fs: remove prepare_write/commit_write").
Between these two commits, commit d9414774dc0c ("cifs: Convert cifs to
new aops.") added a check in cifs_write_begin(), but that check was soon
removed by commit a98ee8c1c707 ("[CIFS] fix regression in
cifs_write_begin/cifs_write_end").
Therefore, AOP_FLAG_UNINTERRUPTIBLE flag is checked nowhere. Let's
remove this flag. This patch has no functionality changes.
Link: http://lkml.kernel.org/r/1489294781-53494-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Wrong sign of iov_iter_revert() argument. Unfortunately, slipped through
the testing, since most of the time we don't do anything to the iterator
afterwards and potential oops on walking the iter->iov too far backwards
is too infrequent to be easily triggered.
Add a sanity check in iov_iter_revert() to catch bugs like this one;
fortunately, the same braino hadn't happened in other callers, but we'd
better have a warning if such thing crops up.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Patch series "Properly invalidate data in the cleancache", v2.
We've noticed that after direct IO write, buffered read sometimes gets
stale data which is coming from the cleancache. The reason for this is
that some direct write hooks call call invalidate_inode_pages2[_range]()
conditionally iff mapping->nrpages is not zero, so we may not invalidate
data in the cleancache.
Another odd thing is that we check only for ->nrpages and don't check
for ->nrexceptional, but invalidate_inode_pages2[_range] also
invalidates exceptional entries as well. So we invalidate exceptional
entries only if ->nrpages != 0? This doesn't feel right.
- Patch 1 fixes direct IO writes by removing ->nrpages check.
- Patch 2 fixes similar case in invalidate_bdev().
Note: I only fixed conditional cleancache_invalidate_inode() here.
Do we also need to add ->nrexceptional check in into invalidate_bdev()?
- Patches 3-4: some optimizations.
This patch (of 4):
Some direct IO write fs hooks call invalidate_inode_pages2[_range]()
conditionally iff mapping->nrpages is not zero. This can't be right,
because invalidate_inode_pages2[_range]() also invalidate data in the
cleancache via cleancache_invalidate_inode() call. So if page cache is
empty but there is some data in the cleancache, buffered read after
direct IO write would get stale data from the cleancache.
Also it doesn't feel right to check only for ->nrpages because
invalidate_inode_pages2[_range] invalidates exceptional entries as well.
Fix this by calling invalidate_inode_pages2[_range]() regardless of
nrpages state.
Note: nfs,cifs,9p doesn't need similar fix because the never call
cleancache_get_page() (nor directly, nor via mpage_readpage[s]()), so
they are not affected by this bug.
Fixes: c515e1fd361c ("mm/fs: add hooks to support cleancache")
Link: http://lkml.kernel.org/r/20170424164135.22350-2-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Kuznetsov <kuznet@virtuozzo.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The round_up() macro generates a couple of unnecessary instructions
in this usage:
48cd: 49 8b 47 50 mov 0x50(%r15),%rax
48d1: 48 83 e8 01 sub $0x1,%rax
48d5: 48 0d ff 0f 00 00 or $0xfff,%rax
48db: 48 83 c0 01 add $0x1,%rax
48df: 48 c1 f8 0c sar $0xc,%rax
48e3: 48 39 c3 cmp %rax,%rbx
48e6: 72 2e jb 4916 <filemap_fault+0x96>
If we change round_up() to ((x) + __round_mask(x, y)) & ~__round_mask(x, y)
then GCC can see through it and remove the mask (because that would be
dead code given the subsequent shift):
48cd: 49 8b 47 50 mov 0x50(%r15),%rax
48d1: 48 05 ff 0f 00 00 add $0xfff,%rax
48d7: 48 c1 e8 0c shr $0xc,%rax
48db: 48 39 c3 cmp %rax,%rbx
48de: 72 2e jb 490e <filemap_fault+0x8e>
But that's problematic because we'd evaluate 'y' twice. Converting
round_up into an inline function prevents it from being used in other
definitions. The easiest thing to do is just change these three usages
of round_up to use DIV_ROUND_UP. Also add an unlikely() because GCC's
heuristic is wrong in this case.
Link: http://lkml.kernel.org/r/20170207192812.5281-1-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"Cleanups that sat in -next + -stable fodder that has just missed 4.11.
There's more iov_iter work in my local tree, but I'd prefer to push
the stuff that had been in -next first"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: don't revert iov buffer if csum error
generic_file_read_iter(): make use of iov_iter_revert()
generic_file_direct_write(): make use of iov_iter_revert()
orangefs: use iov_iter_revert()
sctp: switch to copy_from_iter_full()
net/9p: switch to copy_from_iter_full()
switch memcpy_from_msg() to copy_from_iter_full()
rds: make use of iov_iter_revert()
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
./lib/string.c:134: WARNING: Inline emphasis start-string without end-string.
./mm/filemap.c:522: WARNING: Inline interpreted text or phrase reference start-string without end-string.
./mm/filemap.c:1283: ERROR: Unexpected indentation.
./mm/filemap.c:3003: WARNING: Inline interpreted text or phrase reference start-string without end-string.
./mm/vmalloc.c:1544: WARNING: Inline emphasis start-string without end-string.
./mm/page_alloc.c:4245: ERROR: Unexpected indentation.
./ipc/util.c:676: ERROR: Unexpected indentation.
./drivers/pci/irq.c:35: WARNING: Block quote ends without a blank line; unexpected unindent.
./security/security.c:109: ERROR: Unexpected indentation.
./security/security.c:110: WARNING: Definition list ends without a blank line; unexpected unindent.
./block/genhd.c:275: WARNING: Inline strong start-string without end-string.
./block/genhd.c:283: WARNING: Inline strong start-string without end-string.
./include/linux/clk.h:134: WARNING: Inline emphasis start-string without end-string.
./include/linux/clk.h:134: WARNING: Inline emphasis start-string without end-string.
./ipc/util.c:477: ERROR: Unknown target name: "s".
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
<linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With rw_page, page_endio is used for completing IO on a page and it
propagates write error to the address space if the IO fails. The
problem is it accesses page->mapping directly which might be okay for
file-backed pages but it shouldn't for anonymous page. Otherwise, it
can corrupt one of field from anon_vma under us and system goes panic
randomly.
swap_writepage
bdev_writepage
ops->rw_page
I encountered the BUG during developing new zram feature and it was
really hard to figure it out because it made random crash, somtime
mmap_sem lockdep, sometime other places where places never related to
zram/zsmalloc, and not reproducible with some configuration.
When I consider how that bug is subtle and people do fast-swap test with
brd, it's worth to add stable mark, I think.
Fixes: dd6bd0d9c7db ("swap: use bdev_read_page() / bdev_write_page()")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc warnings in mm/filemap.c:
mm/filemap.c:993: warning: No description found for parameter '__page'
mm/filemap.c:993: warning: Excess function parameter 'page' description in '__lock_page'
Link: http://lkml.kernel.org/r/a66fe492-518c-ad6c-5f03-5e8b721fb451@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These are no longer used outside mm/filemap.c, so un-export them and
make them static where possible. These were exported specifically for
NFS use in commit a4796e37c12e ("MM: export page_wakeup functions").
Link: http://lkml.kernel.org/r/20170103182234.30141-3-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
do_generic_file_read() can be told to perform a large request from
userspace. If the system is under OOM and the reading task is the OOM
victim then it has an access to memory reserves and finishing the full
request can lead to the full memory depletion which is dangerous. Make
sure we rather go with a short read and allow the killed task to
terminate.
Link: http://lkml.kernel.org/r/20170201092706.9966-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently in DAX if we have three read faults on the same hole address we
can end up with the following:
Thread 0 Thread 1 Thread 2
-------- -------- --------
dax_iomap_fault
grab_mapping_entry
lock_slot
<locks empty DAX entry>
dax_iomap_fault
grab_mapping_entry
get_unlocked_mapping_entry
<sleeps on empty DAX entry>
dax_iomap_fault
grab_mapping_entry
get_unlocked_mapping_entry
<sleeps on empty DAX entry>
dax_load_hole
find_or_create_page
...
page_cache_tree_insert
dax_wake_mapping_entry_waiter
<wakes one sleeper>
__radix_tree_replace
<swaps empty DAX entry with 4k zero page>
<wakes>
get_page
lock_page
...
put_locked_mapping_entry
unlock_page
put_page
<sleeps forever on the DAX
wait queue>
The crux of the problem is that once we insert a 4k zero page, all
locking from then on is done in terms of that 4k zero page and any
additional threads sleeping on the empty DAX entry will never be woken.
Fix this by waking all sleepers when we replace the DAX radix tree entry
with a 4k zero page. This will allow all sleeping threads to
successfully transition from locking based on the DAX empty entry to
locking on the 4k zero page.
With the test case reported by Xiong this happens very regularly in my
test setup, with some runs resulting in 9+ threads in this deadlocked
state. With this fix I've been able to run that same test dozens of
times in a loop without issue.
Fixes: ac401cc78242 ("dax: New fault locking")
Link: http://lkml.kernel.org/r/1483479365-13607-1-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Xiong Zhou <xzhou@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org> [4.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mm/filemap.c: In function 'clear_bit_unlock_is_negative_byte':
mm/filemap.c:933:9: error: too few arguments to function 'test_bit'
return test_bit(PG_waiters);
^~~~~~~~
Fixes: b91e1302ad9b ('mm: optimize PageWaiters bit use for unlock_page()')
Signed-off-by: Olof Johansson <olof@lixom.net>
Brown-paper-bag-by: Linus Torvalds <dummy@duh.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit 62906027091f ("mm: add PageWaiters indicating tasks are
waiting for a page bit") Nick Piggin made our page locking no longer
unconditionally touch the hashed page waitqueue, which not only helps
performance in general, but is particularly helpful on NUMA machines
where the hashed wait queues can bounce around a lot.
However, the "clear lock bit atomically and then test the waiters bit"
sequence turns out to be much more expensive than it needs to be,
because you get a nasty stall when trying to access the same word that
just got updated atomically.
On architectures where locking is done with LL/SC, this would be trivial
to fix with a new primitive that clears one bit and tests another
atomically, but that ends up not working on x86, where the only atomic
operations that return the result end up being cmpxchg and xadd. The
atomic bit operations return the old value of the same bit we changed,
not the value of an unrelated bit.
On x86, we could put the lock bit in the high bit of the byte, and use
"xadd" with that bit (where the overflow ends up not touching other
bits), and look at the other bits of the result. However, an even
simpler model is to just use a regular atomic "and" to clear the lock
bit, and then the sign bit in eflags will indicate the resulting state
of the unrelated bit #7.
So by moving the PageWaiters bit up to bit #7, we can atomically clear
the lock bit and test the waiters bit on x86 too. And architectures
with LL/SC (which is all the usual RISC suspects), the particular bit
doesn't matter, so they are fine with this approach too.
This avoids the extra access to the same atomic word, and thus avoids
the costly stall at page unlock time.
The only downside is that the interface ends up being a bit odd and
specialized: clear a bit in a byte, and test the sign bit. Nick doesn't
love the resulting name of the new primitive, but I'd rather make the
name be descriptive and very clear about the limitation imposed by
trying to work across all relevant architectures than make it be some
generic thing that doesn't make the odd semantics explicit.
So this introduces the new architecture primitive
clear_bit_unlock_is_negative_byte();
and adds the trivial implementation for x86. We have a generic
non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)"
combination) which can be overridden by any architecture that can do
better. According to Nick, Power has the same hickup x86 has, for
example, but some other architectures may not even care.
All these optimizations mean that my page locking stress-test (which is
just executing a lot of small short-lived shell scripts: "make test" in
the git source tree) no longer makes our page locking look horribly bad.
Before all these optimizations, just the unlock_page() costs were just
over 3% of all CPU overhead on "make test". After this, it's down to
0.66%, so just a quarter of the cost it used to be.
(The difference on NUMA is bigger, but there this micro-optimization is
likely less noticeable, since the big issue on NUMA was not the accesses
to 'struct page', but the waitqueue accesses that were already removed
by Nick's earlier commit).
Acked-by: Nick Piggin <npiggin@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a new page flag, PageWaiters, to indicate the page waitqueue has
tasks waiting. This can be tested rather than testing waitqueue_active
which requires another cacheline load.
This bit is always set when the page has tasks on page_waitqueue(page),
and is set and cleared under the waitqueue lock. It may be set when
there are no tasks on the waitqueue, which will cause a harmless extra
wakeup check that will clears the bit.
The generic bit-waitqueue infrastructure is no longer used for pages.
Instead, waitqueues are used directly with a custom key type. The
generic code was not flexible enough to have PageWaiters manipulation
under the waitqueue lock (which simplifies concurrency).
This improves the performance of page lock intensive microbenchmarks by
2-3%.
Putting two bits in the same word opens the opportunity to remove the
memory barrier between clearing the lock bit and testing the waiters
bit, after some work on the arch primitives (e.g., ensuring memory
operand widths match and cover both bits).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
