| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Increase the test coverage of list_test_list_replace*() by adding the
checks to compare the pointer of "a_new.next" and "a_new.prev" to make
sure a perfect circular doubly linked list is formed after the
replacement.
Link: https://lkml.kernel.org/r/20240910040818.65723-1-richard120310@gmail.com
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix test for list_cut_position*() for the missing check of integer "i"
after the second loop. The variable should be checked for second time to
make sure both lists after the cut operation are formed as expected.
Link: https://lkml.kernel.org/r/20240910043531.71343-1-richard120310@gmail.com
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "resource: Fix region_intersects() vs
add_memory_driver_managed()", v3.
The patchset fixes a bug of region_intersects() for systems with CXL
memory. The details of the bug can be found in [1/3]. To avoid similar
bugs in the future. A kunit test case for region_intersects() is added in
[3/3]. [2/3] is a preparation patch for [3/3].
This patch (of 3):
region_intersects() is important because it's used for /dev/mem permission
checking. To avoid possible bug of region_intersects() in the future, a
kunit test case for region_intersects() is added.
Link: https://lkml.kernel.org/r/20240906030713.204292-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20240906030713.204292-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects updates from Thomas Gleixner:
- Use the threshold to check for the pool refill condition and not the
run time recorded all time low fill value, which is lower than the
threshold and therefore causes refills to be delayed.
- KCSAN annotation updates and simplification of the fill_pool() code.
* tag 'core-debugobjects-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Remove redundant checks in fill_pool()
debugobjects: Fix conditions in fill_pool()
debugobjects: Fix the compilation attributes of some global variables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This contains the work to improve read/write performance for the new
netfs library.
The main performance enhancing changes are:
- Define a structure, struct folio_queue, and a new iterator type,
ITER_FOLIOQ, to hold a buffer as a replacement for ITER_XARRAY. See
that patch for questions about naming and form.
ITER_FOLIOQ is provided as a replacement for ITER_XARRAY. The
problem with an xarray is that accessing it requires the use of a
lock (typically the RCU read lock) - and this means that we can't
supply iterate_and_advance() with a step function that might sleep
(crypto for example) without having to drop the lock between pages.
ITER_FOLIOQ is the iterator for a chain of folio_queue structs,
where each folio_queue holds a small list of folios. A folio_queue
struct is a simpler structure than xarray and is not subject to
concurrent manipulation by the VM. folio_queue is used rather than
a bvec[] as it can form lists of indefinite size, adding to one end
and removing from the other on the fly.
- Provide a copy_folio_from_iter() wrapper.
- Make cifs RDMA support ITER_FOLIOQ.
- Use folio queues in the write-side helpers instead of xarrays.
- Add a function to reset the iterator in a subrequest.
- Simplify the write-side helpers to use sheaves to skip gaps rather
than trying to work out where gaps are.
- In afs, make the read subrequests asynchronous, putting them into
work items to allow the next patch to do progressive
unlocking/reading.
- Overhaul the read-side helpers to improve performance.
- Fix the caching of a partial block at the end of a file.
- Allow a store to be cancelled.
Then some changes for cifs to make it use folio queues instead of
xarrays for crypto bufferage:
- Use raw iteration functions rather than manually coding iteration
when hashing data.
- Switch to using folio_queue for crypto buffers.
- Remove the xarray bits.
Make some adjustments to the /proc/fs/netfs/stats file such that:
- All the netfs stats lines begin 'Netfs:' but change this to
something a bit more useful.
- Add a couple of stats counters to track the numbers of skips and
waits on the per-inode writeback serialisation lock to make it
easier to check for this as a source of performance loss.
Miscellaneous work:
- Ensure that the sb_writers lock is taken around
vfs_{set,remove}xattr() in the cachefiles code.
- Reduce the number of conditional branches in netfs_perform_write().
- Move the CIFS_INO_MODIFIED_ATTR flag to the netfs_inode struct and
remove cifs_post_modify().
- Move the max_len/max_nr_segs members from netfs_io_subrequest to
netfs_io_request as they're only needed for one subreq at a time.
- Add an 'unknown' source value for tracing purposes.
- Remove NETFS_COPY_TO_CACHE as it's no longer used.
- Set the request work function up front at allocation time.
- Use bh-disabling spinlocks for rreq->lock as cachefiles completion
may be run from block-filesystem DIO completion in softirq context.
- Remove fs/netfs/io.c"
* tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
docs: filesystems: corrected grammar of netfs page
cifs: Don't support ITER_XARRAY
cifs: Switch crypto buffer to use a folio_queue rather than an xarray
cifs: Use iterate_and_advance*() routines directly for hashing
netfs: Cancel dirty folios that have no storage destination
cachefiles, netfs: Fix write to partial block at EOF
netfs: Remove fs/netfs/io.c
netfs: Speed up buffered reading
afs: Make read subreqs async
netfs: Simplify the writeback code
netfs: Provide an iterator-reset function
netfs: Use new folio_queue data type and iterator instead of xarray iter
cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs
iov_iter: Provide copy_folio_from_iter()
mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios
netfs: Use bh-disabling spinlocks for rreq->lock
netfs: Set the request work function upon allocation
netfs: Remove NETFS_COPY_TO_CACHE
netfs: Reserve netfs_sreq_source 0 as unset/unknown
netfs: Move max_len/max_nr_segs from netfs_io_subrequest to netfs_io_stream
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu"
"API:
- Make self-test asynchronous
Algorithms:
- Remove MPI functions added for SM3
- Add allocation error checks to remaining MPI functions (introduced
for SM3)
- Set default Jitter RNG OSR to 3
Drivers:
- Add hwrng driver for Rockchip RK3568 SoC
- Allow disabling SR-IOV VFs through sysfs in qat
- Fix device reset bugs in hisilicon
- Fix authenc key parsing by using generic helper in octeontx*
Others:
- Fix xor benchmarking on parisc"
* tag 'v6.12-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (96 commits)
crypto: n2 - Set err to EINVAL if snprintf fails for hmac
crypto: camm/qi - Use ERR_CAST() to return error-valued pointer
crypto: mips/crc32 - Clean up useless assignment operations
crypto: qcom-rng - rename *_of_data to *_match_data
crypto: qcom-rng - fix support for ACPI-based systems
dt-bindings: crypto: qcom,prng: document support for SA8255p
crypto: aegis128 - Fix indentation issue in crypto_aegis128_process_crypt()
crypto: octeontx* - Select CRYPTO_AUTHENC
crypto: testmgr - Hide ENOENT errors
crypto: qat - Remove trailing space after \n newline
crypto: hisilicon/sec - Remove trailing space after \n newline
crypto: algboss - Pass instance creation error up
crypto: api - Fix generic algorithm self-test races
crypto: hisilicon/qm - inject error before stopping queue
crypto: hisilicon/hpre - mask cluster timeout error
crypto: hisilicon/qm - reset device before enabling it
crypto: hisilicon/trng - modifying the order of header files
crypto: hisilicon - add a lock for the qp send operation
crypto: hisilicon - fix missed error branch
crypto: ccp - do not request interrupt on cmd completion when irqs disabled
...
|
|
As described in commit 42d9b379e3e1 ("lib/Kconfig.debug: Allow BTF +
DWARF5 with pahole 1.21+"), the combination of CONFIG_DEBUG_INFO_BTF
and CONFIG_DEBUG_INFO_DWARF5 requires pahole 1.21+.
GCC 11+ and Clang 14+ default to DWARF 5 when the -g flag is passed.
For the same reason, the combination of CONFIG_DEBUG_INFO_BTF and
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is also likely to require
pahole 1.21+ these days. (At least, it is uncertain whether the actual
requirement is pahole 1.16+ or 1.21+.)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240913173759.1316390-3-masahiroy@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When DEBUG_INFO_DWARF5 is selected, pahole 1.21+ is required to enable
DEBUG_INFO_BTF.
When DEBUG_INFO_DWARF4 or DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is selected,
DEBUG_INFO_BTF can be enabled without pahole installed, but a build error
will occur in scripts/link-vmlinux.sh:
LD .tmp_vmlinux1
BTF: .tmp_vmlinux1: pahole (pahole) is not available
Failed to generate BTF for vmlinux
Try to disable CONFIG_DEBUG_INFO_BTF
We did not guard DEBUG_INFO_BTF by PAHOLE_VERSION when previously
discussed [1].
However, commit 613fe1692377 ("kbuild: Add CONFIG_PAHOLE_VERSION")
added CONFIG_PAHOLE_VERSION after all. Now several CONFIG options, as
well as the combination of DEBUG_INFO_BTF and DEBUG_INFO_DWARF5, are
guarded by PAHOLE_VERSION.
The remaining compile-time check in scripts/link-vmlinux.sh now appears
to be an awkward inconsistency.
This commit adopts Nathan's original work.
[1]: https://lore.kernel.org/lkml/20210111180609.713998-1-natechancellor@gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240913173759.1316390-2-masahiroy@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Depending on the architecture, building a 32-bit vDSO on a 64-bit kernel
is problematic when some system headers are included.
Minimise the amount of headers by moving needed items, such as
__{get,put}_unaligned_t, into dedicated common headers and in general
use more specific headers, similar to what was done in commit
8165b57bca21 ("linux/const.h: Extract common header for vDSO") and
commit 8c59ab839f52 ("lib/vdso: Enable common headers").
On some architectures this results in missing PAGE_SIZE, as was
described by commit 8b3843ae3634 ("vdso/datapage: Quick fix - use
asm/page-def.h for ARM64"), so define this if necessary, in the same way
as done prior by commit cffaefd15a8f ("vdso: Use CONFIG_PAGE_SHIFT in
vdso/datapage.h").
Removing linux/time64.h leads to missing 'struct timespec64' in
x86's asm/pvclock.h. Add a forward declaration of that struct in
that file.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
With the current implementation, __cvdso_getrandom_data() calls
memset() on certain architectures, which is unexpected in the VDSO.
Rather than providing a memset(), simply rewrite opaque data
initialization to avoid memset().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Same as for the gettimeofday CVDSO implementation, add c-getrandom-y to
ease the inclusion of lib/vdso/getrandom.c in architectures' VDSO
builds.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Performing SMP atomic operations on u64 fails on powerpc32:
CC drivers/char/random.o
In file included from <command-line>:
drivers/char/random.c: In function 'crng_reseed':
././include/linux/compiler_types.h:510:45: error: call to '__compiletime_assert_391' declared with attribute error: Need native word sized stores/loads for atomicity.
510 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
././include/linux/compiler_types.h:491:25: note: in definition of macro '__compiletime_assert'
491 | prefix ## suffix(); \
| ^~~~~~
././include/linux/compiler_types.h:510:9: note: in expansion of macro '_compiletime_assert'
510 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
././include/linux/compiler_types.h:513:9: note: in expansion of macro 'compiletime_assert'
513 | compiletime_assert(__native_word(t), \
| ^~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/barrier.h:74:9: note: in expansion of macro 'compiletime_assert_atomic_type'
74 | compiletime_assert_atomic_type(*p); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/barrier.h:172:55: note: in expansion of macro '__smp_store_release'
172 | #define smp_store_release(p, v) do { kcsan_release(); __smp_store_release(p, v); } while (0)
| ^~~~~~~~~~~~~~~~~~~
drivers/char/random.c:286:9: note: in expansion of macro 'smp_store_release'
286 | smp_store_release(&__arch_get_k_vdso_rng_data()->generation, next_gen + 1);
| ^~~~~~~~~~~~~~~~~
The kernel-side generation counter in the random driver is handled as an
unsigned long, not as a u64, in base_crng and struct crng.
But on the vDSO side, it needs to be an u64, not just an unsigned long,
in order to support a 32-bit vDSO atop a 64-bit kernel.
On kernel side, however, it is an unsigned long, hence a 32-bit value on
32-bit architectures, so just cast it to unsigned long for the
smp_store_release(). A side effect is that on big endian architectures
the store will be performed in the upper 32 bits. It is not an issue on
its own because the vDSO site doesn't mind the value, as it only checks
differences. Just make sure that the vDSO side checks the full 64 bits.
For that, the local current_generation has to be u64 as well.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Adds test suite for integer based power function which performs integer
exponentiation.
The test suite is designed to verify that the implementation of int_pow
correctly computes the power of a given base raised to a given exponent.
The tests check various scenarios and edge cases to ensure the accuracy
and reliability of the exponentiation function.
Updated commit with test information at commit time: Shuah Khan
Signed-off-by: Luis Felipe Hernandez <luis.hernandez093@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Define a data structure, struct folio_queue, to represent a sequence of
folios and a kernel-internal I/O iterator type, ITER_FOLIOQ, to allow a
list of folio_queue structures to be used to provide a buffer to
iov_iter-taking functions, such as sendmsg and recvmsg.
The folio_queue structure looks like:
struct folio_queue {
struct folio_batch vec;
u8 orders[PAGEVEC_SIZE];
struct folio_queue *next;
struct folio_queue *prev;
unsigned long marks;
unsigned long marks2;
};
It does not use a list_head so that next and/or prev can be set to NULL at
the ends of the list, allowing iov_iter-handling routines to determine that
they *are* the ends without needing to store a head pointer in the iov_iter
struct.
A folio_batch struct is used to hold the folio pointers which allows the
batch to be passed to batch handling functions. Two mark bits are
available per slot. The intention is to use at least one of them to mark
folios that need putting, but that might not be ultimately necessary.
Accessor functions are used to access the slots to do the masking and an
additional accessor function is used to indicate the size of the array.
The order of each folio is also stored in the structure to avoid the need
for iov_iter_advance() and iov_iter_revert() to have to query each folio to
find its size.
With careful barriering, this can be used as an extending buffer with new
folios inserted and new folio_queue structs added without the need for a
lock. Further, provided we always keep at least one struct in the buffer,
we can also remove consumed folios and consumed structs from the head end
as we without the need for locks.
[Questions/thoughts]
(1) To manage this, I need a head pointer, a tail pointer, a tail slot
number (assuming insertion happens at the tail end and the next
pointers point from head to tail). Should I put these into a struct
of their own, say "folio_queue_head" or "rolling_buffer"?
I will end up with two of these in netfs_io_request eventually, one
keeping track of the pagecache I'm dealing with for buffered I/O and
the other to hold a bounce buffer when we need one.
(2) Should I make the slots {folio,off,len} or bio_vec?
(3) This is intended to replace ITER_XARRAY eventually. Using an xarray
in I/O iteration requires the taking of the RCU read lock, doing
copying under the RCU read lock, walking the xarray (which may change
under us), handling retries and dealing with special values.
The advantage of ITER_XARRAY is that when we're dealing with the
pagecache directly, we don't need any allocation - but if we're doing
encrypted comms, there's a good chance we'd be using a bounce buffer
anyway.
This will require afs, erofs, cifs, orangefs and fscache to be
converted to not use this. afs still uses it for dirs and symlinks;
some of erofs usages should be easy to change, but there's one which
won't be so easy; ceph's use via fscache can be fixed by porting ceph
to netfslib; cifs is using xarray as a bounce buffer - that can be
moved to use sheaves instead; and orangefs has a similar problem to
erofs - maybe orangefs could use netfslib?
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Gao Xiang <xiang@kernel.org>
cc: Mike Marshall <hubcap@omnibond.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: linux-erofs@lists.ozlabs.org
cc: devel@lists.orangefs.org
Link: https://lore.kernel.org/r/20240814203850.2240469-13-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
With freader we don't need to restrict ourselves to a single page, so
let's allow ELF notes to be at any valid position with the file.
We also merge parse_build_id() and parse_build_id_buf() as now the only
difference between them is note offset overflow, which makes sense to
check in all situations.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extend freader with a flag specifying whether it's OK to cause page
fault to fetch file data that is not already physically present in
memory. With this, it's now easy to wait for data if the caller is
running in sleepable (faultable) context.
We utilize read_cache_folio() to bring the desired folio into page
cache, after which the rest of the logic works just the same at folio level.
Suggested-by: Omar Sandoval <osandov@fb.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make it clear that build_id_parse() assumes that it can take no page
fault by renaming it and current few users to build_id_parse_nofault().
Also add build_id_parse() stub which for now falls back to non-sleepable
implementation, but will be changed in subsequent patches to take
advantage of sleepable context. PROCMAP_QUERY ioctl() on
/proc/<pid>/maps file is using build_id_parse() and will automatically
take advantage of more reliable sleepable context implementation.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that freader allows to access multiple pages transparently, there is
no need to limit program headers to the very first ELF file page. Remove
this limitation, but still put some sane limit on amount of program
headers that we are willing to iterate over (set arbitrarily to 256).
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Current code assumption is that program (segment) headers are following
ELF header immediately. This is a common case, but is not guaranteed. So
take into account e_phoff field of the ELF header when accessing program
headers.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add freader abstraction that transparently manages fetching and local
mapping of the underlying file page(s) and provides a simple direct data
access interface.
freader_fetch() is the only and single interface necessary. It accepts
file offset and desired number of bytes that should be accessed, and
will return a kernel mapped pointer that caller can use to dereference
data up to requested size. Requested size can't be bigger than the size
of the extra buffer provided during initialization (because, worst case,
all requested data has to be copied into it, so it's better to flag
wrongly sized buffer unconditionally, regardless if requested data range
is crossing page boundaries or not).
If folio is not paged in, or some of the conditions are not satisfied,
NULL is returned and more detailed error code can be accessed through
freader->err field. This approach makes the usage of freader_fetch()
cleaner.
To accommodate accessing file data that crosses folio boundaries, user
has to provide an extra buffer that will be used to make a local copy,
if necessary. This is done to maintain a simple linear pointer data
access interface.
We switch existing build ID parsing logic to it, without changing or
lifting any of the existing constraints, yet. This will be done
separately.
Given existing code was written with the assumption that it's always
working with a single (first) page of the underlying ELF file, logic
passes direct pointers around, which doesn't really work well with
freader approach and would be limiting when removing the single page (folio)
limitation. So we adjust all the logic to work in terms of file offsets.
There is also a memory buffer-based version (freader_init_from_mem())
for cases when desired data is already available in kernel memory. This
is used for parsing vmlinux's own build ID note. In this mode assumption
is that provided data starts at "file offset" zero, which works great
when parsing ELF notes sections, as all the parsing logic is relative to
note section's start.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Harden build ID parsing logic, adding explicit READ_ONCE() where it's
important to have a consistent value read and validated just once.
Also, as pointed out by Andi Kleen, we need to make sure that entire ELF
note is within a page bounds, so move the overflow check up and add an
extra note_size boundaries validation.
Fixes tag below points to the code that moved this code into
lib/buildid.c, and then subsequently was used in perf subsystem, making
this code exposed to perf_event_open() users in v5.12+.
Cc: stable@vger.kernel.org
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Fixes: bd7525dacd7e ("bpf: Move stack_map_get_build_id into lib")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
To update with the latest fixes.
|
|
Add null check for character class. Previously, an inverted character
class could result in a nul byte being matched and lead to the function
reading past the end of the inputted string.
Link: https://lkml.kernel.org/r/20240826155709.12383-1-swaminathanalok@gmail.com
Signed-off-by: Alok Swaminathan <swaminathanalok@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
People keep trying to remove three functions that are going to be used in
a feature that is being developed. Dropping the functions entirely may
end up with people trying to use the bit for other uses, as people have
tried in the past.
Adding __maybe_unused stops compilers complaining about the unused
functions so they can be silently optimised out of the compiled code and
people won't try to claim the bit for another use.
Link: https://lore.kernel.org/all/20230726080916.17454-2-zhangpeng.00@bytedance.com/
Link: https://lore.kernel.org/all/202408310728.S7EE59BN-lkp@intel.com/
Link: https://lkml.kernel.org/r/20240907021506.4018676-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ZSTD_createCDict_advanced2() must ensure that
ZSTD_createCDict_advanced_internal() has successfully allocated cdict.
customMalloc() may be called under low memory condition and may be unable
to allocate workspace for cdict.
Link: https://lkml.kernel.org/r/20240902105656.1383858-4-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This symbol is needed to enable lz4hc dictionary support.
Link: https://lkml.kernel.org/r/20240902105656.1383858-3-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "zram: introduce custom comp backends API", v7.
This series introduces support for run-time compression algorithms tuning,
so users, for instance, can adjust compression/acceleration levels and
provide pre-trained compression/decompression dictionaries which certain
algorithms support.
At this point we stop supporting (old/deprecated) comp API. We may add
new acomp API support in the future, but before that zram needs to undergo
some major rework (we are not ready for async compression).
Some benchmarks for reference (look at column #2)
*** init zstd
/sys/block/zram0/mm_stat
1750659072 504622188 514355200 0 514355200 1 0 34204 34204
*** init zstd dict=/home/ss/zstd-dict-amd64
/sys/block/zram0/mm_stat
1750650880 465908890 475398144 0 475398144 1 0 34185 34185
*** init zstd level=8 dict=/home/ss/zstd-dict-amd64
/sys/block/zram0/mm_stat
1750654976 430803319 439873536 0 439873536 1 0 34185 34185
*** init lz4
/sys/block/zram0/mm_stat
1750646784 664266564 677060608 0 677060608 1 0 34288 34288
*** init lz4 dict=/home/ss/lz4-dict-amd64
/sys/block/zram0/mm_stat
1750650880 619990300 632102912 0 632102912 1 0 34278 34278
*** init lz4hc
/sys/block/zram0/mm_stat
1750630400 609023822 621232128 0 621232128 1 0 34288 34288
*** init lz4hc dict=/home/ss/lz4-dict-amd64
/sys/block/zram0/mm_stat
1750659072 505133172 515231744 0 515231744 1 0 34278 34278
Recompress
init zram zstd (prio=0), zstd level=5 (prio 1), zstd with dict (prio 2)
*** zstd
/sys/block/zram0/mm_stat
1750982656 504630584 514269184 0 514269184 1 0 34204 34204
*** idle recompress priority=1 (zstd level=5)
/sys/block/zram0/mm_stat
1750982656 488645601 525438976 0 514269184 1 0 34204 34204
*** idle recompress priority=2 (zstd dict)
/sys/block/zram0/mm_stat
1750982656 460869640 517914624 0 514269184 1 0 34185 34204
This patch (of 24):
We need to export a number of API functions that enable advanced zstd
usage - C/D dictionaries, dictionaries sharing between contexts, etc.
Link: https://lkml.kernel.org/r/20240902105656.1383858-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20240902105656.1383858-2-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch tries to cleanup some function description:
* function name mismatch
* parameter name mismatch
* parameter all end up with ':'
* not prefix '*' if parameter is a pointer
There is still some missing description of parameters, I didn't add them
since I am not sure the exact meaning.
Link: https://lkml.kernel.org/r/20240830220400.2007-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Just do what mt_dump_range64() does.
Dump the error message based on format.
Link: https://lkml.kernel.org/r/20240826012422.29935-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mt_dump_arange64() only applies to an entry whose type is maple_arange_64,
in which mte_is_leaf() must return false.
Since mte_is_leaf() here is always false, we can remove this condition
check.
Link: https://lkml.kernel.org/r/20240826012422.29935-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
fill_pool() checks locklessly at the beginning whether the pool has to be
refilled. After that it checks locklessly in a loop whether the free list
contains objects and repeats the refill check.
If both conditions are true, it acquires the pool lock and tries to move
objects from the free list to the pool repeating the same checks again.
There are two redundant issues with that:
1) The repeated check for the fill condition
2) The loop processing
The repeated check is pointless as it was just established that fill is
required. The condition has to be re-evaluated under the lock anyway.
The loop processing is not required either because there is practically
zero chance that a repeated attempt will succeed if the checks under the
lock terminate the moving of objects.
Remove the redundant check and replace the loop with a simple if condition.
[ tglx: Massaged change log ]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240904133944.2124-4-thunder.leizhen@huawei.com
|
|
fill_pool() uses 'obj_pool_min_free' to decide whether objects should be
handed back to the kmem cache. But 'obj_pool_min_free' records the lowest
historical value of the number of objects in the object pool and not the
minimum number of objects which should be kept in the pool.
Use 'debug_objects_pool_min_level' instead, which holds the minimum number
which was scaled to the number of CPUs at boot time.
[ tglx: Massage change log ]
Fixes: d26bf5056fc0 ("debugobjects: Reduce number of pool_lock acquisitions in fill_pool()")
Fixes: 36c4ead6f6df ("debugobjects: Add global free list and the counter")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240904133944.2124-3-thunder.leizhen@huawei.com
|
|
1. Both debug_objects_pool_min_level and debug_objects_pool_size are
read-only after initialization, change attribute '__read_mostly' to
'__ro_after_init', and remove '__data_racy'.
2. Many global variables are read in the debug_stats_show() function, but
didn't mask KCSAN's detection. Add '__data_racy' for them.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240904133944.2124-2-thunder.leizhen@huawei.com
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Provide an inlined fast path
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There are several comments all over the place, which uses a wrong singular
form of jiffies.
Replace 'jiffie' by 'jiffy'. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fix fromShuah Khan:
"One single fix to a use-after-free bug resulting from
kunit_driver_create() failing to copy the driver name leaving it on
the stack or freeing it"
* tag 'linux_kselftest-kunit-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Device wrappers should also manage driver name
|
|
Pull bpf/master to receive baebe9aaba1e ("bpf: allow passing struct
bpf_iter_<type> as kfunc arguments") and related changes in preparation for
the DSQ iterator patchset.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Patch series "Increase the number of bits available in page_type".
Kent wants more than 16 bits in page_type, so I resurrected this old patch
and expanded it a bit. It's a bit more efficient than our current scheme
(1 4-byte insn vs 3 insns of 13 bytes total) to test a single page type.
This patch (of 4):
An upcoming patch will convert page type from being a bitfield to a
single byte, so we will not be able to use %pG to print the page type
any more. The printing of the symbolic name will be restored in that
patch.
Link: https://lkml.kernel.org/r/20240821173914.2270383-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20240821173914.2270383-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
NETIF_F_LLTX can't be changed via Ethtool and is not a feature,
rather an attribute, very similar to IFF_NO_QUEUE (and hot).
Free one netdev_features_t bit and make it a "hot" private flag.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
debugfs_create_dir() returns error pointers. It never returns NULL. So
use IS_ERR() to check it.
Link: https://lkml.kernel.org/r/20240821073441.9701-1-11162571@vivo.com
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works for
that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Link: https://lkml.kernel.org/r/20240821155140.611514-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add missing __percpu qualifier to a (void *) cast to fix
percpu_counter.c:212:36: warning: cast removes address space '__percpu' of expression
percpu_counter.c:212:33: warning: incorrect type in assignment (different address spaces)
percpu_counter.c:212:33: expected signed int [noderef] [usertype] __percpu *counters
percpu_counter.c:212:33: got void *
sparse warnings.
Found by GCC's named address space checks.
There were no changes in the resulting object file.
Link: https://lkml.kernel.org/r/20240814064437.940162-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The original _bin2bcd() function used / 10 and % 10 operations for
conversion. Although GCC optimizes these operations and does not generate
division or modulus instructions, the new implementation reduces the
number of mov instructions in the generated code for both x86-64 and ARM
architectures.
This optimization calculates the tens digit using (val * 103) >> 10, which
is accurate for values of 'val' in the range [0, 178]. Given that the
valid input range is [0, 99], this method ensures correctness while
simplifying the generated code.
Link: https://lkml.kernel.org/r/20240812170229.229380-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The fault-inject.h users across the kernel need to add a lot of #ifdef
CONFIG_FAULT_INJECTION to cater for shortcomings in the header. Make
fault-inject.h self-contained for CONFIG_FAULT_INJECTION=n, and add stubs
for DECLARE_FAULT_ATTR(), setup_fault_attr(), should_fail_ex(), and
should_fail() to allow removal of conditional compilation.
[akpm@linux-foundation.org: repair fallout from no longer including debugfs.h into fault-inject.h]
[akpm@linux-foundation.org: fix drivers/misc/xilinx_tmr_inject.c]
[akpm@linux-foundation.org: Add debugfs.h inclusion to more files, per Stephen]
Link: https://lkml.kernel.org/r/20240813121237.2382534-1-jani.nikula@intel.com
Fixes: 6ff1cb355e62 ("[PATCH] fault-injection capabilities infrastructure")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Upon allocation failure, the current check with the nofail bits is
unnecessary, and further stands in the way of discouraging direct use of
__GFP_NOFAIL. Remove this and replace with the proper way of determining
if doing a non-blocking allocation for the nested table case.
Link: https://lkml.kernel.org/r/20240806153927.184515-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Suggested-by: Michal Hocko <mhocko@suse.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_LOCKDEP_CHAINS_BITS value decides the size of chain_hlocks[] in
kernel/locking/lockdep.c, and it is checked by add_chain_cache() with
BUILD_BUG_ON((1UL << 24) <= ARRAY_SIZE(chain_hlocks));
This patch is just to silence BUILD_BUG_ON().
See also https://lore.kernel.org/all/30795.1620913191@jrobl/
[cmllamas@google.com: fix minor checkpatch issues in commit log]
Link: https://lkml.kernel.org/r/20240723164018.2489615-1-cmllamas@google.com
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
