summaryrefslogtreecommitdiff
path: root/ipc/sem.c
AgeCommit message (Collapse)AuthorFilesLines
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-27ipc/sem.c: prevent queue.status tearing in semopDavidlohr Bueso1-1/+1
In order for load/store tearing prevention to work, _all_ accesses to the variable in question need to be done around READ and WRITE_ONCE() macros. Ensure everyone does so for q->status variable for semtimedop(). Link: http://lkml.kernel.org/r/20180717052654.676-1-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-22rhashtable: split rhashtable.hNeilBrown1-0/+1
Due to the use of rhashtables in net namespaces, rhashtable.h is included in lots of the kernel, so a small changes can required a large recompilation. This makes development painful. This patch splits out rhashtable-types.h which just includes the major type declarations, and does not include (non-trivial) inline code. rhashtable.h is no longer included by anything in the include/ directory. Common include files only include rhashtable-types.h so a large recompilation is only triggered when that changes. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-15sysvipc/sem: mitigate semnum index against spectre v1Davidlohr Bueso1-4/+14
Both smatch and coverity are reporting potential issues with spectre variant 1 with the 'semnum' index within the sma->sems array, ie: ipc/sem.c:388 sem_lock() warn: potential spectre issue 'sma->sems' ipc/sem.c:641 perform_atomic_semop_slow() warn: potential spectre issue 'sma->sems' ipc/sem.c:721 perform_atomic_semop() warn: potential spectre issue 'sma->sems' Avoid any possible speculation by using array_index_nospec() thus ensuring the semnum value is bounded to [0, sma->sem_nsems). With the exception of sem_lock() all of these are slowpaths. Link: http://lkml.kernel.org/r/20180423171131.njs4rfm2yzyeg6do@linux-n805 Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-13treewide: kvmalloc() -> kvmalloc_array()Kees Cook1-1/+1
The kvmalloc() function has a 2-factor argument form, kvmalloc_array(). This patch replaces cases of: kvmalloc(a * b, gfp) with: kvmalloc_array(a * b, gfp) as well as handling cases of: kvmalloc(a * b * c, gfp) with: kvmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(char) * COUNT + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvmalloc + kvmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvmalloc(C1 * C2 * C3, ...) | kvmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvmalloc(sizeof(THING) * C2, ...) | kvmalloc(sizeof(TYPE) * C2, ...) | kvmalloc(C1 * C2 * C3, ...) | kvmalloc(C1 * C2, ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-20y2038: ipc: Enable COMPAT_32BIT_TIMEArnd Bergmann1-1/+2
Three ipc syscalls (mq_timedsend, mq_timedreceive and and semtimedop) take a timespec argument. After we move 32-bit architectures over to useing 64-bit time_t based syscalls, we need seperate entry points for the old 32-bit based interfaces. This changes the #ifdef guards for the existing 32-bit compat syscalls to check for CONFIG_COMPAT_32BIT_TIME instead, which will then be enabled on all existing 32-bit architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-20y2038: ipc: Use __kernel_timespecArnd Bergmann1-2/+2
This is a preparatation for changing over __kernel_timespec to 64-bit times, which involves assigning new system call numbers for mq_timedsend(), mq_timedreceive() and semtimedop() for compatibility with future y2038 proof user space. The existing ABIs will remain available through compat code. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-20y2038: ipc: Report long times to user spaceArnd Bergmann1-3/+11
The shmid64_ds/semid64_ds/msqid64_ds data structures have been extended to contain extra fields for storing the upper bits of the time stamps, this patch does the other half of the job and and fills the new fields on 32-bit architectures as well as 32-bit tasks running on a 64-bit kernel in compat mode. There should be no change for native 64-bit tasks. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-20y2038: ipc: Use ktime_get_real_seconds consistentlyArnd Bergmann1-3/+3
In some places, we still used get_seconds() instead of ktime_get_real_seconds(), and I'm changing the remaining ones now to all use ktime_get_real_seconds() so we use the full available range for timestamps instead of overflowing the 'unsigned long' return value in year 2106 on 32-bit kernels. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-11ipc/sem: introduce semctl(SEM_STAT_ANY)Davidlohr Bueso1-5/+12
There is a permission discrepancy when consulting shm ipc object metadata between /proc/sysvipc/sem (0444) and the SEM_STAT semctl command. The later does permission checks for the object vs S_IRUGO. As such there can be cases where EACCESS is returned via syscall but the info is displayed anyways in the procfs files. While this might have security implications via info leaking (albeit no writing to the sma metadata), this behavior goes way back and showing all the objects regardless of the permissions was most likely an overlook - so we are stuck with it. Furthermore, modifying either the syscall or the procfs file can cause userspace programs to break (ie ipcs). Some applications require getting the procfs info (without root privileges) and can be rather slow in comparison with a syscall -- up to 500x in some reported cases for shm. This patch introduces a new SEM_STAT_ANY command such that the sem ipc object permissions are ignored, and only audited instead. In addition, I've left the lsm security hook checks in place, as if some policy can block the call, then the user has no other choice than just parsing the procfs file. Link: http://lkml.kernel.org/r/20180215162458.10059-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reported-by: Robert Kettler <robert.kettler@outlook.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-04Merge branch 'userns-linus' of ↵Linus Torvalds1-28/+53
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace updates from Eric Biederman: "There was a lot of work this cycle fixing bugs that were discovered after the merge window and getting everything ready where we can reasonably support fully unprivileged fuse. The bug fixes you already have and much of the unprivileged fuse work is coming in via other trees. Still left for fully unprivileged fuse is figuring out how to cleanly handle .set_acl and .get_acl in the legacy case, and properly handling of evm xattrs on unprivileged mounts. Included in the tree is a cleanup from Alexely that replaced a linked list with a statically allocated fix sized array for the pid caches, which simplifies and speeds things up. Then there is are some cleanups and fixes for the ipc namespace. The motivation was that in reviewing other code it was discovered that access ipc objects from different pid namespaces recorded pids in such a way that when asked the wrong pids were returned. In the worst case there has been a measured 30% performance impact for sysvipc semaphores. Other test cases showed no measurable performance impact. Manfred Spraul and Davidlohr Bueso who tend to work on sysvipc performance both gave the nod that this is good enough. Casey Schaufler and James Morris have given their approval to the LSM side of the changes. I simplified the types and the code dealing with sysvipc to pass just kern_ipc_perm for all three types of ipc. Which reduced the header dependencies throughout the kernel and simplified the lsm code. Which let me work on the pid fixes without having to worry about trivial changes causing complete kernel recompiles" * 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ipc/shm: Fix pid freeing. ipc/shm: fix up for struct file no longer being available in shm.h ipc/smack: Tidy up from the change in type of the ipc security hooks ipc: Directly call the security hook in ipc_ops.associate ipc/sem: Fix semctl(..., GETPID, ...) between pid namespaces ipc/msg: Fix msgctl(..., IPC_STAT, ...) between pid namespaces ipc/shm: Fix shmctl(..., IPC_STAT, ...) between pid namespaces. ipc/util: Helpers for making the sysvipc operations pid namespace aware ipc: Move IPCMNI from include/ipc.h into ipc/util.h msg: Move struct msg_queue into ipc/msg.c shm: Move struct shmid_kernel into ipc/shm.c sem: Move struct sem and struct sem_array into ipc/sem.c msg/security: Pass kern_ipc_perm not msg_queue into the msg_queue security hooks shm/security: Pass kern_ipc_perm not shmid_kernel into the shm security hooks sem/security: Pass kern_ipc_perm not sem_array into the sem security hooks pidns: simpler allocation of pid_* caches
2018-04-02ipc: add semctl syscall/compat_syscall wrappersDominik Brodowski1-2/+12
Provide ksys_semctl() and compat_ksys_semctl() wrappers to avoid in-kernel calls to these syscalls. The ksys_ prefix denotes that these functions are meant as a drop-in replacement for the syscalls. In particular, they use the same calling convention as sys_semctl() and compat_sys_semctl(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02ipc: add semget syscall wrapperDominik Brodowski1-1/+6
Provide ksys_semget() wrapper to avoid in-kernel calls to this syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_semget(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02ipc: add semtimedop syscall/compat_syscall wrappersDominik Brodowski1-5/+18
Provide ksys_semtimedop() and compat_ksys_semtimedop() wrappers to avoid in-kernel calls to these syscalls. The ksys_ prefix denotes that these functions are meant as a drop-in replacement for the syscalls. In particular, they use the same calling convention as sys_semtimedop() and compat_sys_semtimedop(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-03-27ipc: Directly call the security hook in ipc_ops.associateEric W. Biederman1-9/+1
After the last round of cleanups the shm, sem, and msg associate operations just became trivial wrappers around the appropriate security method. Simplify things further by just calling the security method directly. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-03-27ipc/sem: Fix semctl(..., GETPID, ...) between pid namespacesEric W. Biederman1-10/+12
Today the last process to update a semaphore is remembered and reported in the pid namespace of that process. If there are processes in any other pid namespace querying that process id with GETPID the result will be unusable nonsense as it does not make any sense in your own pid namespace. Due to ipc_update_pid I don't think you will be able to get System V ipc semaphores into a troublesome cache line ping-pong. Using struct pids from separate process are not a problem because they do not share a cache line. Using struct pid from different threads of the same process are unlikely to be a problem as the reference count update can be avoided. Further linux futexes are a much better tool for the job of mutual exclusion between processes than System V semaphores. So I expect programs that are performance limited by their interprocess mutual exclusion primitive will be using futexes. So while it is possible that enhancing the storage of the last rocess of a System V semaphore from an integer to a struct pid will cause a performance regression because of the effect of frequently updating the pid reference count. I don't expect that to happen in practice. This change updates semctl(..., GETPID, ...) to return the process id of the last process to update a semphore inthe pid namespace of the calling process. Fixes: b488893a390e ("pid namespaces: changes to show virtual ids to user") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-03-23sem: Move struct sem and struct sem_array into ipc/sem.cEric W. Biederman1-0/+34
All of the users are now in ipc/sem.c so make the definitions local to that file to make code maintenance easier. AKA to prevent rebuilding the entire kernel when one of these files is changed. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-03-23sem/security: Pass kern_ipc_perm not sem_array into the sem security hooksEric W. Biederman1-11/+8
All of the implementations of security hooks that take sem_array only access sem_perm the struct kern_ipc_perm member. This means the dependencies of the sem security hooks can be simplified by passing the kern_ipc_perm member of sem_array. Making this change will allow struct sem and struct sem_array to become private to ipc/sem.c. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-02-07ipc: fix ipc data structures inconsistencyPhilippe Mikoyan1-0/+10
As described in the title, this patch fixes <ipc>id_ds inconsistency when <ipc>ctl_stat executes concurrently with some ds-changing function, e.g. shmat, msgsnd or whatever. For instance, if shmctl(IPC_STAT) is running concurrently with shmat, following data structure can be returned: {... shm_lpid = 0, shm_nattch = 1, ...} Link: http://lkml.kernel.org/r/20171202153456.6514-1-philippe.mikoyan@skat.systems Signed-off-by: Philippe Mikoyan <philippe.mikoyan@skat.systems> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-18Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+1
Merge more updates from Andrew Morton: - a bit more MM - procfs updates - dynamic-debug fixes - lib/ updates - checkpatch - epoll - nilfs2 - signals - rapidio - PID management cleanup and optimization - kcov updates - sysvipc updates - quite a few misc things all over the place * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) EXPERT Kconfig menu: fix broken EXPERT menu include/asm-generic/topology.h: remove unused parent_node() macro arch/tile/include/asm/topology.h: remove unused parent_node() macro arch/sparc/include/asm/topology_64.h: remove unused parent_node() macro arch/sh/include/asm/topology.h: remove unused parent_node() macro arch/ia64/include/asm/topology.h: remove unused parent_node() macro drivers/pcmcia/sa1111_badge4.c: avoid unused function warning mm: add infrastructure for get_user_pages_fast() benchmarking sysvipc: make get_maxid O(1) again sysvipc: properly name ipc_addid() limit parameter sysvipc: duplicate lock comments wrt ipc_addid() sysvipc: unteach ids->next_id for !CHECKPOINT_RESTORE initramfs: use time64_t timestamps drivers/watchdog: make use of devm_register_reboot_notifier() kernel/reboot.c: add devm_register_reboot_notifier() kcov: update documentation Makefile: support flag -fsanitizer-coverage=trace-cmp kcov: support comparison operands collection kcov: remove pointless current != NULL check kernel/panic.c: add TAINT_AUX ...
2017-11-18sysvipc: duplicate lock comments wrt ipc_addid()Davidlohr Bueso1-0/+1
The comment in msgqueues when using ipc_addid() is quite useful imo. Duplicate it for shm and semaphores. Link: http://lkml.kernel.org/r/20170831172049.14576-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17Merge branch 'work.misc' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff, really no common topic here" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: grab the lock instead of blocking in __fd_install during resizing vfs: stop clearing close on exec when closing a fd include/linux/fs.h: fix comment about struct address_space fs: make fiemap work from compat_ioctl coda: fix 'kernel memory exposure attempt' in fsync pstore: remove unneeded unlikely() vfs: remove unneeded unlikely() stubs for mount_bdev() and kill_block_super() in !CONFIG_BLOCK case make vfs_ustat() static do_handle_open() should be static elf_fdpic: fix unused variable warning fold destroy_super() into __put_super() new helper: destroy_unused_super() fix address space warnings in ipc/ acct.h: get rid of detritus
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-11fix address space warnings in ipc/Linus Torvalds1-2/+2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-15Merge branch 'work.ipc' of ↵Linus Torvalds1-116/+228
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ipc compat cleanup and 64-bit time_t from Al Viro: "IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa Dinamani" * 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: utimes: Make utimes y2038 safe ipc: shm: Make shmid_kernel timestamps y2038 safe ipc: sem: Make sem_array timestamps y2038 safe ipc: msg: Make msg_queue timestamps y2038 safe ipc: mqueue: Replace timespec with timespec64 ipc: Make sys_semtimedop() y2038 safe get rid of SYSVIPC_COMPAT on ia64 semtimedop(): move compat to native shmat(2): move compat to native msgrcv(2), msgsnd(2): move compat to native ipc(2): move compat to native ipc: make use of compat ipc_perm helpers semctl(): move compat to native semctl(): separate all layout-dependent copyin/copyout msgctl(): move compat to native msgctl(): split the actual work from copyin/copyout ipc: move compat shmctl to native shmctl: split the work from copyin/copyout
2017-09-09ipc: optimize semget/shmget/msgget for lots of keysGuillaume Knispel1-4/+7
ipc_findkey() used to scan all objects to look for the wanted key. This is slow when using a high number of keys. This change adds an rhashtable of kern_ipc_perm objects in ipc_ids, so that one lookup cease to be O(n). This change gives a 865% improvement of benchmark reaim.jobs_per_min on a 56 threads Intel(R) Xeon(R) CPU E5-2695 v3 @ 2.30GHz with 256G memory [1] Other (more micro) benchmark results, by the author: On an i5 laptop, the following loop executed right after a reboot took, without and with this change: for (int i = 0, k=0x424242; i < KEYS; ++i) semget(k++, 1, IPC_CREAT | 0600); total total max single max single KEYS without with call without call with 1 3.5 4.9 µs 3.5 4.9 10 7.6 8.6 µs 3.7 4.7 32 16.2 15.9 µs 4.3 5.3 100 72.9 41.8 µs 3.7 4.7 1000 5,630.0 502.0 µs * * 10000 1,340,000.0 7,240.0 µs * * 31900 17,600,000.0 22,200.0 µs * * *: unreliable measure: high variance The duration for a lookup-only usage was obtained by the same loop once the keys are present: total total max single max single KEYS without with call without call with 1 2.1 2.5 µs 2.1 2.5 10 4.5 4.8 µs 2.2 2.3 32 13.0 10.8 µs 2.3 2.8 100 82.9 25.1 µs * 2.3 1000 5,780.0 217.0 µs * * 10000 1,470,000.0 2,520.0 µs * * 31900 17,400,000.0 7,810.0 µs * * Finally, executing each semget() in a new process gave, when still summing only the durations of these syscalls: creation: total total KEYS without with 1 3.7 5.0 µs 10 32.9 36.7 µs 32 125.0 109.0 µs 100 523.0 353.0 µs 1000 20,300.0 3,280.0 µs 10000 2,470,000.0 46,700.0 µs 31900 27,800,000.0 219,000.0 µs lookup-only: total total KEYS without with 1 2.5 2.7 µs 10 25.4 24.4 µs 32 106.0 72.6 µs 100 591.0 352.0 µs 1000 22,400.0 2,250.0 µs 10000 2,510,000.0 25,700.0 µs 31900 28,200,000.0 115,000.0 µs [1] http://lkml.kernel.org/r/20170814060507.GE23258@yexl-desktop Link: http://lkml.kernel.org/r/20170815194954.ck32ta2z35yuzpwp@debix Signed-off-by: Guillaume Knispel <guillaume.knispel@supersonicimagine.com> Reviewed-by: Marc Pardo <marc.pardo@supersonicimagine.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Kees Cook <keescook@chromium.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Serge Hallyn <serge@hallyn.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Guillaume Knispel <guillaume.knispel@supersonicimagine.com> Cc: Marc Pardo <marc.pardo@supersonicimagine.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09ipc/sem: play nicer with large nsops allocationsDavidlohr Bueso1-2/+2
Replacing semop()'s kmalloc for kvmalloc was originally proposed by Manfred on the premise that it can be called for large (than order-1) sizes. For example, while Oracle recommends setting SEMOPM to a _minimum_ of 100, some distros[1] encourage the setting to be a factor of the amount of db tasks (PROCESSES), which can get fishy for large systems (easily going beyond 1000). [1] An Example of Semaphore Settings https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/5/html/Tuning_and_Optimizing_Red_Hat_Enterprise_Linux_for_Oracle_9i_and_10g_Databases/sect-Oracle_9i_and_10g_Tuning_Guide-Setting_Semaphores-An_Example_of_Semaphore_Settings.html So let's just convert this to kvmalloc, just like the rest of the allocations we do in ipc. While the fallback vmalloc obviously involves more overhead, this by far the uncommon path, and it's better for the user than just erroring out with kmalloc. Link: http://lkml.kernel.org/r/20170803184136.13855-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09ipc/sem: drop sem_checkid helperDavidlohr Bueso1-2/+0
... 'tis not used. Link: http://lkml.kernel.org/r/20170803184136.13855-1-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09ipc: convert sem_undo_list.refcnt from atomic_t to refcount_tElena Reshetova1-4/+4
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Link: http://lkml.kernel.org/r/1499417992-3238-3-git-send-email-elena.reshetova@intel.com Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: <arozansk@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-04ipc: sem: Make sem_array timestamps y2038 safeDeepa Dinamani1-9/+9
time_t is not y2038 safe. Replace all uses of time_t by y2038 safe time64_t. Similarly, replace the calls to get_seconds() with y2038 safe ktime_get_real_seconds(). Note that this preserves fast access on 64 bit systems, but 32 bit systems need sequence counters. The syscall interface themselves are not changed as part of the patch. They will be part of a different series. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-04ipc: Make sys_semtimedop() y2038 safeDeepa Dinamani1-6/+6
struct timespec is not y2038 safe on 32 bit machines. Replace timespec with y2038 safe struct timespec64. Note that the patch only changes the internals without modifying the syscall interface. This will be part of a separate series. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-21Merge branch 'for-mingo' of ↵Ingo Molnar1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Removal of spin_unlock_wait() - SRCU updates - Torture-test updates - Documentation updates - Miscellaneous fixes - CPU-hotplug fixes - Miscellaneous non-RCU fixes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-17ipc: Replace spin_unlock_wait() with lock/unlock pairPaul E. McKenney1-1/+2
There is no agreed-upon definition of spin_unlock_wait()'s semantics, and it appears that all callers could do just as well with a lock/unlock pair. This commit therefore replaces the spin_unlock_wait() call in exit_sem() with spin_lock() followed immediately by spin_unlock(). This should be safe from a performance perspective because exit_sem() is rarely invoked in production. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Manfred Spraul <manfred@colorfullife.com>
2017-08-03ipc: add missing container_of()s for randstructKees Cook1-1/+2
When building with the randstruct gcc plugin, the layout of the IPC structs will be randomized, which requires any sub-structure accesses to use container_of(). The proc display handlers were missing the needed container_of()s since the iterator is passing in the top-level struct kern_ipc_perm. This would lead to crashes when running the "lsipc" program after the system had IPC registered (e.g. after starting up Gnome): general protection fault: 0000 [#1] PREEMPT SMP ... RIP: 0010:shm_add_rss_swap.isra.1+0x13/0xa0 ... Call Trace: sysvipc_shm_proc_show+0x5e/0x150 sysvipc_proc_show+0x1a/0x30 seq_read+0x2e9/0x3f0 ... Link: http://lkml.kernel.org/r/20170730205950.GA55841@beast Fixes: 3859a271a003 ("randstruct: Mark various structs for randomization") Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-16semtimedop(): move compat to nativeAl Viro1-11/+33
... and finally kill the sodding compat_convert_timespec() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-16semctl(): move compat to nativeAl Viro1-0/+94
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-16semctl(): separate all layout-dependent copyin/copyoutAl Viro1-98/+94
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-13ipc/sem: drop __sem_free()Kees Cook1-7/+2
The remaining users of __sem_free() can simply call kvfree() instead for better readability. [manfred@colorfullife.com: Rediff to keep rcu protection for security_sem_alloc()] Link: http://lkml.kernel.org/r/20170525185107.12869-20-manfred@colorfullife.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13ipc: move atomic_set() to where it is neededKees Cook1-1/+0
Only after ipc_addid() has succeeded will refcounting be used, so move initialization into ipc_addid() and remove from open-coded *_alloc() routines. Link: http://lkml.kernel.org/r/20170525185107.12869-17-manfred@colorfullife.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13ipc/sem.c: avoid ipc_rcu_putref for failed ipc_addid()Manfred Spraul1-5/+4
Loosely based on a patch from Kees Cook <keescook@chromium.org>: - id and retval can be merged - if ipc_addid() fails, then use call_rcu() directly. The difference is that call_rcu is used for failed ipc_addid() calls, to continue to guaranteed an rcu delay for security_sem_free(). Link: http://lkml.kernel.org/r/20170525185107.12869-14-manfred@colorfullife.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13ipc/sem: avoid ipc_rcu_alloc()Kees Cook1-5/+20
Instead of using ipc_rcu_alloc() which only performs the refcount bump, open code it to perform better sem-specific checks. This also allows for sem_array structure layout to be randomized in the future. [manfred@colorfullife.com: Rediff, because the memset was temporarily inside ipc_rcu_alloc()] Link: http://lkml.kernel.org/r/20170525185107.12869-10-manfred@colorfullife.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13ipc/sem: do not use ipc_rcu_free()Kees Cook1-2/+7
Avoid using ipc_rcu_free, since it just re-finds the original structure pointer. For the pre-list-init failure path, there is no RCU needed, since it was just allocated. It can be directly freed. Link: http://lkml.kernel.org/r/20170525185107.12869-6-manfred@colorfullife.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13ipc: drop non-RCU allocationKees Cook1-3/+5
The only users of ipc_alloc() were ipc_rcu_alloc() and the on-heap sem_io fall-back memory. Better to just open-code these to make things easier to read. [manfred@colorfullife.com: Rediff due to inclusion of memset() into ipc_rcu_alloc()] Link: http://lkml.kernel.org/r/20170525185107.12869-5-manfred@colorfullife.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13ipc: merge ipc_rcu and kern_ipc_permManfred Spraul1-17/+17
ipc has two management structures that exist for every id: - struct kern_ipc_perm, it contains e.g. the permissions. - struct ipc_rcu, it contains the rcu head for rcu handling and the refcount. The patch merges both structures. As a bonus, we may save one cacheline, because both structures are cacheline aligned. In addition, it reduces the number of casts, instead most codepaths can use container_of. To simplify code, the ipc_rcu_alloc initializes the allocation to 0. [manfred@colorfullife.com: really include the memset() into ipc_alloc_rcu()] Link: http://lkml.kernel.org/r/564f8612-0601-b267-514f-a9f650ec9b32@colorfullife.com Link: http://lkml.kernel.org/r/20170525185107.12869-3-manfred@colorfullife.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13ipc/sem.c: remove sem_base, embed struct semManfred Spraul1-54/+34
sma->sem_base is initialized with sma->sem_base = (struct sem *) &sma[1]; The current code has four problems: - There is an unnecessary pointer dereference - sem_base is not needed. - Alignment for struct sem only works by chance. - The current code causes false positive for static code analysis. - This is a cast between different non-void types, which the future randstruct GCC plugin warns on. And, as bonus, the code size gets smaller: Before: 0 .text 00003770 After: 0 .text 0000374e [manfred@colorfullife.com: s/[0]/[]/, per hch] Link: http://lkml.kernel.org/r/20170525185107.12869-2-manfred@colorfullife.com Link: http://lkml.kernel.org/r/20170515171912.6298-2-manfred@colorfullife.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Kees Cook <keescook@chromium.org> Cc: <1vier1@web.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Fabian Frederick <fabf@skynet.be> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/wake_q.h> We are going to split <linux/sched/wake_q.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/wake_q.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-28ipc/sem: add hysteresisManfred Spraul1-25/+61
sysv sem has two lock modes: One with per-semaphore locks, one lock mode with a single global lock for the whole array. When switching from the per-semaphore locks to the global lock, all per-semaphore locks must be scanned for ongoing operations. The patch adds a hysteresis for switching from the global lock to the per semaphore locks. This reduces how often the per-semaphore locks must be scanned. Compared to the initial patch, this is a simplified solution: Setting USE_GLOBAL_LOCK_HYSTERESIS to 1 restores the current behavior. In theory, a workload with exactly 10 simple sops and then one complex op now scales a bit worse, but this is pure theory: If there is concurrency, the it won't be exactly 10:1:10:1:10:1:... If there is no concurrency, then there is no need for scalability. Link: http://lkml.kernel.org/r/1476851896-3590-3-git-send-email-manfred@colorfullife.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: <1vier1@web.de> Cc: kernel test robot <xiaolong.ye@intel.com> Cc: <felixh@informatik.uni-bremen.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-28ipc/sem.c: avoid using spin_unlock_wait()Manfred Spraul1-22/+3
a) The ACQUIRE in spin_lock() applies to the read, not to the store, at least for powerpc. This forces to add a smp_mb() into the fast path. b) The memory barrier provided by spin_unlock_wait() is right now arch dependent. Therefore: Use spin_lock()/spin_unlock() instead of spin_unlock_wait(). Advantage: faster single op semop calls(), observed +8.9% on x86. (the other solution would be arch dependencies in ipc/sem). Disadvantage: slower complex op semop calls, if (and only if) there are no sleeping operations. The next patch adds hysteresis, this further reduces the probability that the slow path is used. Link: http://lkml.kernel.org/r/1476851896-3590-2-git-send-email-manfred@colorfullife.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: <1vier1@web.de> Cc: kernel test robot <xiaolong.ye@intel.com> Cc: <felixh@informatik.uni-bremen.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-11ipc/sem.c: fix incorrect sem_lock pairingManfred Spraul1-1/+1
Based on the syzcaller test case from dvyukov: https://gist.githubusercontent.com/dvyukov/d0e5efefe4d7d6daed829f5c3ca26a40/raw/08d0a261fe3c987bed04fbf267e08ba04bd533ea/gistfile1.txt The slow (i.e.: failure to acquire) syscall exit from semtimedop() incorrectly assumed that the the same lock is acquired as it was at the initial syscall entry. This is wrong: - thread A: single semop semop(), sleeps - thread B: multi semop semop(), sleeps - thread A: woken up by signal/timeout With this sequence, the initial sem_lock() call locks the per-semaphore spinlock, and it is unlocked with sem_unlock(). The call at the syscall return locks the global spinlock. Because locknum is not updated, the following sem_unlock() call unlocks the per-semaphore spinlock, which is actually not locked. The fix is trivial: Use the return value from sem_lock. Fixes: 370b262c896e ("ipc/sem: avoid idr tree lookup for interrupted semop") Link: http://lkml.kernel.org/r/1482215645-22328-1-git-send-email-manfred@colorfullife.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Johanna Abrahamsson <johanna@mjao.org> Tested-by: Johanna Abrahamsson <johanna@mjao.org> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-15ipc/sem: avoid idr tree lookup for interrupted semopDavidlohr Bueso1-32/+5
We can avoid the idr tree lookup (albeit possibly avoiding idr_find_fast()) when being awoken in EINTR, as the semid will not change in this context while blocked. Use the sma pointer directly and take the sem_lock, then re-check for RMID races. We continue to re-check the queue.status with the lock held such that we can detect situations where we where are dealing with a spurious wakeup but another task that holds the sem_lock updated the queue.status while we were spinning for it. Once we take the lock it obviously won't change again. Being the only caller, get rid of sem_obtain_lock() altogether. Link: http://lkml.kernel.org/r/1478708774-28826-3-git-send-email-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 15:27:35 +0300