| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
Subject: netfilter: updates for net-next
1) Speed up nftables transactions after earlier transaction failed.
Due to a (harmeless) bug we remained in slow paranoia mode until
a successful transaction completes.
2) Allow generic tracker to resolve clashes, this avoids very rare
packet drops. From Yuto Hamaguchi.
3) Increase the cleanup budget to 64 entries in nf_conncount to reap
more entries in one go, from Fernando Fernandez Mancera.
4) Allow icmp trackers to resolve clashes, this avoids very rare
initial packet drop with test cases that have high-frequency pings.
After this all trackers except tcp and sctp allow clash resolution.
5) Disentangle netfilter headers, don't include nftables/xtables headers
in subsystems that are unrelated.
6) Don't rely on implicit includes coming from nf_conntrack_proto_gre.h.
7) Allow nfnetlink_queue nfq instance struct to get accounted via memcg,
from Scott Mitchell.
8) Reject bogus xt target/match data upfront via netlink policiy in
nft_compat interface rather than relying on x_tables API to do it.
9) Fix nf_conncount breakage when trying to limit loopback flows via
prerouting rule, from Fernando Fernandez Mancera.
This is a recent breakage but not seen as urgent enough to rush this
via net tree at this late stage in development cycle.
10) Fix a possible off-by-one when parsing tcp option in xtables tcpmss
match. Also handled via -next due to late stage in development
cycle.
* tag 'nf-next-26-01-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: xt_tcpmss: check remaining length before reading optlen
netfilter: nf_conncount: fix tracking of connections from localhost
netfilter: nft_compat: add more restrictions on netlink attributes
netfilter: nfnetlink_queue: nfqnl_instance GFP_ATOMIC -> GFP_KERNEL_ACCOUNT allocation
netfilter: nf_conntrack: don't rely on implicit includes
netfilter: don't include xt and nftables.h in unrelated subsystems
netfilter: nf_conntrack: enable icmp clash support
netfilter: nf_conncount: increase the connection clean up limit to 64
netfilter: nf_conntrack: Add allow_clash to generic protocol handler
netfilter: nf_tables: reset table validation state on abort
====================
Link: https://patch.msgid.link/20260120191803.22208-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some drivers of MAC + tightly integrated PCS (example: SJA1105 + XPCS
covered by same reset domain) need to perform resets at runtime.
The reset is triggered by the MAC driver, and it needs to restore its
and the PCS' registers, all invisible to phylink.
However, there is a desire to simplify the API through which the MAC and
the PCS interact, so this becomes challenging.
Phylink holds all the necessary state to help with this operation, and
can offer two helpers which walk the MAC and PCS drivers again through
the callbacks required during a destructive reset operation. The
procedure is as follows:
Before reset, MAC driver calls phylink_replay_link_begin():
- Triggers phylink mac_link_down() and pcs_link_down() methods
After reset, MAC driver calls phylink_replay_link_end():
- Triggers phylink mac_config() -> pcs_config() -> mac_link_up() ->
pcs_link_up() methods.
MAC and PCS registers are restored with no other custom driver code.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260119121954.1624535-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Mediatek LynxI PCS is used from the MT7530 DSA driver (where it does
not have an OF presence) and from mtk_eth_soc, where it does
(Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
informs of a combined clock provider + SGMII PCS "SGMIISYS" syscon
block).
Currently, mtk_eth_soc parses the SGMIISYS OF node for the
"mediatek,pnswap" property and sets a bit in the "flags" argument of
mtk_pcs_lynxi_create() if set.
I'd like to deprecate "mediatek,pnswap" in favour of a property which
takes the current phy-mode into consideration. But this is only known at
mtk_pcs_lynxi_config() time, and not known at mtk_pcs_lynxi_create(),
when the SGMIISYS OF node is parsed.
To achieve that, we must pass the OF node of the PCS, if it exists, to
mtk_pcs_lynxi_create(), and let the PCS take a reference on it and
handle property parsing whenever it wants.
Use the fwnode API which is more general than OF (in case we ever need
to describe the PCS using some other format). This API should be NULL
tolerant, so add no particular tests for the mt7530 case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119091220.1493761-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove one function call from GRO stack for native IPv6 + TCP packets.
$ scripts/bloat-o-meter -t vmlinux.2 vmlinux.3
add/remove: 0/0 grow/shrink: 1/1 up/down: 298/-5 (293)
Function old new delta
ipv6_gro_complete 435 733 +298
tcp6_gro_complete 311 306 -5
Total: Before=22593532, After=22593825, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FDO/LTO are unable to inline tcp6_gro_receive() from ipv6_gro_receive()
Make sure tcp6_check_fraglist_gro() is only called only when needed,
so that compiler can leave it out-of-line.
$ scripts/bloat-o-meter -t vmlinux.1 vmlinux.2
add/remove: 2/0 grow/shrink: 3/1 up/down: 1123/-253 (870)
Function old new delta
ipv6_gro_receive 1069 1846 +777
tcp6_check_fraglist_gro - 272 +272
ipv6_offload_init 218 274 +56
__pfx_tcp6_check_fraglist_gro - 16 +16
ipv6_gro_complete 433 435 +2
tcp6_gro_receive 959 706 -253
Total: Before=22592662, After=22593532, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
clang does not inline this helper in GRO fast path.
We can save space and cpu cycles.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/2 grow/shrink: 2/0 up/down: 156/-218 (-62)
Function old new delta
tcp6_gro_complete 227 311 +84
tcp4_gro_complete 325 397 +72
__pfx___skb_incr_checksum_unnecessary 32 - -32
__skb_incr_checksum_unnecessary 186 - -186
Total: Before=22592724, After=22592662, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We can change tcp_rsk() and inet_rsk() to propagate their argument
const qualifier thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260120125353.1470456-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'add-devm_clk_bulk_get_optional_enable-helper-and-use-in-axi-ethernet-driver'
Suraj Gupta says:
====================
Add devm_clk_bulk_get_optional_enable() helper and use in AXI Ethernet driver
This patch series introduces a new managed clock framework helper function
and demonstrates its usage in AXI ethernet driver.
Device drivers frequently need to get optional bulk clocks, prepare them,
and enable them during probe, while ensuring automatic cleanup on device
unbind. Currently, this requires three separate operations with manual
cleanup handling.
The new devm_clk_bulk_get_optional_enable() helper combines these
operations into a single managed call, eliminating boilerplate code and
following the established pattern of devm_clk_bulk_get_all_enabled().
====================
Link: https://patch.msgid.link/20260116192725.972966-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new managed clock framework helper function that combines getting
optional bulk clocks and enabling them in a single operation.
The devm_clk_bulk_get_optional_enable() function simplifies the common
pattern where drivers need to get optional bulk clocks, prepare and enable
them, and have them automatically disabled/unprepared and freed when the
device is unbound.
This new API follows the established pattern of
devm_clk_bulk_get_all_enabled() and reduces boilerplate code in drivers
that manage multiple optional clocks.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260116192725.972966-2-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A previous commit got rid of any use of this member, but forgot to
remove it. Kill it.
Fixes: f4bb2f65bb81 ("io_uring/eventfd: move ctx->evfd_last_cq_tail into io_ev_fd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main changes are devicetree updates for qualcomm and rockchips
arm64 platforms, fixing minor mistakes in SoC and board specific
settings:
- GPIO settings for Pinephone Pro buttons
- Register ranges for rk3576 GPU
- Power domains on sc8280xp
- Clocks on qcom talos
- dtc warnings for extraneous properties, nonstandard node names and
undocument identifiers
The Tegra210 platform gets a single revert for a devicetree change
that caused a 6.19 regression.
On 32-bit Arm, we have trivial fixes for Microchip SAMA7 devicetree
files and NPCM Kconfig, as well as Andrew Jeffery being officially
listed as MAINTAINER for NPCM.
A single driver fix is for Qualcomm RPMHD power domains, bringing the
driver up to date with a devicetree change that added additional power
domains to be enabled"
* tag 'soc-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
MAINTAINERS: Add Andrew as M: to ARM/NUVOTON NPCM ARCHITECTURE
MAINTAINERS: update email address for Yixun Lan
Revert "arm64: tegra: Add interconnect properties for Tegra210"
arm64: dts: rockchip: Drop unsupported properties
arm64: dts: rockchip: Fix gpio pinctrl node names
arm64: dts: rockchip: Fix pinctrl property typo on rk3326-odroid-go3
arm64: dts: rockchip: Drop "sitronix,st7789v" fallback compatible from rk3568-wolfvision
ARM: dts: microchip: sama7d65: fix size-cells property for i2c3
ARM: dts: microchip: sama7d65: fix the ranges property for flx9
arm: npcm: drop unused Kconfig ERRATA symbol
arm64: dts: rockchip: Fix wrong register range of rk3576 gpu
arm64: dts: rockchip: Configure MCLK for analog sound on NanoPi M5
arm64: dts: rockchip: Fix headphones widget name on NanoPi M5
ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290
arm64: dts: rockchip: remove redundant max-link-speed from nanopi-r4s
arm64: dts: rockchip: remove dangerous max-link-speed from helios64
arm64: dts: rockchip: fix unit-address for RK3588 NPU's core1 and core2's IOMMU
arm64: dts: rockchip: Fix wifi interrupts flag on Sakura Pi RK3308B
arm64: dts: qcom: sm8650: Fix compile warnings in USB controller node
arm64: dts: qcom: sm8550: Fix compile warnings in USB controller node
...
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
On new Dell models the driver must read a UEFI variable to get a
variant identifier for the audio hardware. Without this, the driver
cannot know which firmware file to load to the amps.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.20
Support multiple wait queues in the SCM firmware interface and provide
discovery of the wait queue interrupt to deal with the cases where
bootloader didn't patch the DeviceTree with the IRQ information.
Refactor the MDT loader and the SCM driver's peripheral authentication
service interface and introduce support for passing a remoteproc
resource table to the firmware. The remoteproc patches that uses this
and uses this to configure the IOMMU are included here due to
bidirectional dependencies. The end result is remoteproc support on the
Glymur platform.
Enable QSEECOM and thereby UEFI variable access, on the Surface Pro 11.
Make the QMI interface endianness aware, to support ath1Xk on big endian
machines.
Add the Glymur support in LLCC driver.
* tag 'qcom-drivers-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
soc: qcom: preserve CPU endianness for QMI_DATA_LEN
soc: qcom: fix QMI encoding/decoding for basic elements
soc: qcom: check QMI basic element error codes
soc: qcom: ubwc: add missing include
remoteproc: qcom: pas: Enable Secure PAS support with IOMMU managed by Linux
remoteproc: pas: Extend parse_fw callback to fetch resources via SMC call
firmware: qcom_scm: Add qcom_scm_pas_get_rsc_table() to get resource table
firmware: qcom_scm: Add SHM bridge handling for PAS when running without QHEE
firmware: qcom_scm: Refactor qcom_scm_pas_init_image()
firmware: qcom_scm: Add a prep version of auth_and_reset function
soc: qcom: mdtloader: Remove qcom_mdt_pas_init() from exported symbols
soc: qcom: mdtloader: Add PAS context aware qcom_mdt_pas_load() function
remoteproc: pas: Replace metadata context with PAS context structure
firmware: qcom_scm: Introduce PAS context allocator helper function
firmware: qcom_scm: Rename peripheral as pas_id
firmware: qcom_scm: Remove redundant piece of code
dt-bindings: remoteproc: qcom,pas: Add iommus property
soc: qcom: cmd-db: Use devm_memremap() to fix memory leak in cmd_db_dev_probe
soc: qcom: pmic_glink_altmode: Consume TBT3/USB4 mode notifications
dt-bindings: qcom,pdc: document the Milos Power Domain Controller
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers changes for 6.20:
- A few changes from Peng Fan adding dump syslog support for i.MX
System Manager firmware driver, cleaning up soc-imx9 driver, fixing
error handling for soc-imx8m driver
* tag 'imx-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8m: Fix error handling for clk_prepare_enable()
soc: imx: Spport i.MX9[4,52]
soc: imx: Use dev_err_probe() for i.MX9
soc: imx: Use device-managed APIs for i.MX9
firmware: imx: sm-misc: Dump syslog info
firmware: arm_scmi: imx: Support getting syslog of MISC protocol
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.20-rc1
This series primarily refactors the Tegra PMC driver to eliminate
reliance on a global variable, transitioning to passing the tegra_pmc
context explicitly across clocks, powergates, sysfs/debugfs interfaces,
and power management callbacks. Additionally, it resolves a warning
during system resume by deferring an unsafe generic_handle_irq() call to
a hard IRQ context using irq_work.
* tag 'tegra-for-6.20-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add PMC contextual functions
soc/tegra: pmc: Do not rely on global variable
soc/tegra: pmc: Use driver-private data
soc/tegra: pmc: Use PMC context embedded in powergates
soc/tegra: pmc: Pass PMC context as debugfs data
soc/tegra: pmc: Pass PMC context via sys-off callback data
soc/tegra: pmc: Embed reboot notifier in PMC context
soc/tegra: pmc: Store PMC context in clocks
soc/tegra: pmc: Pass struct tegra_pmc to tegra_powergate_state()
soc/tegra: pmc: Use contextual data instead of global variable
soc/tegra: pmc: Fix unsafe generic_handle_irq() call
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.20
1. Several improvements in Exynos ChipID Socinfo driver and finally
adding Google GS101 SoC support.
2. Few cleanups from old code.
3. Documenting Axis Artpec-9 SoC PMU (Power Management Unit).
* tag 'samsung-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c: remove a leftover hwmon-s3c.h header file
dt-bindings: soc: samsung: exynos-pmu: Drop unnecessary select schema
soc: samsung: exynos-chipid: add google,gs101-otp support
soc: samsung: exynos-chipid: downgrade dev_info to dev_dbg for soc info
soc: samsung: exynos-chipid: rename method
dt-bindings: nvmem: add google,gs101-otp
soc: samsung: exynos-chipid: use dev_err_probe where appropiate
soc: samsung: exynos-chipid: use devm action to unregister soc device
dt-bindings: samsung: exynos-pmu: Add compatible for ARTPEC-9 SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
TEE sysfs for 6.20
- Add an optional generic sysfs attribute for TEE revision
- Implement revision reporting for OP-TEE using both SMC and FF-A ABIs
* tag 'tee-sysfs-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: optee: store OS revision for TEE core
tee: add revision sysfs attribute
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
TEE bus callback for 6.20
- Move from generic device_driver to TEE bus-specific callbacks
- Add module_tee_client_driver() and registration helpers to reduce
boilerplate
- Convert several client drivers (TPM, KEYS, firmware, EFI, hwrng,
and RTC)
- Update documentation and fix kernel-doc warnings
* tag 'tee-bus-callback-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tpm/tpm_ftpm_tee: Fix kdoc after function renames
tpm/tpm_ftpm_tee: Make use of tee bus methods
tpm/tpm_ftpm_tee: Make use of tee specific driver registration
KEYS: trusted: Make use of tee bus methods
KEYS: trusted: Migrate to use tee specific driver registration function
firmware: tee_bnxt: Make use of tee bus methods
firmware: tee_bnxt: Make use of module_tee_client_driver()
firmware: arm_scmi: Make use of tee bus methods
firmware: arm_scmi: optee: Make use of module_tee_client_driver()
efi: stmm: Make use of tee bus methods
efi: stmm: Make use of module_tee_client_driver()
hwrng: optee - Make use of tee bus methods
hwrng: optee - Make use of module_tee_client_driver()
rtc: optee: Make use of tee bus methods
rtc: optee: Migrate to use tee specific driver registration function
tee: Adapt documentation to cover recent additions
tee: Add probe, remove and shutdown bus callbacks to tee_client_driver
tee: Add some helpers to reduce boilerplate for tee client drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.20 (take two)
- Add and use for_each_of_imap_item() iterator,
- Add support for the RZ/N1 GPIO Interrupt Multiplexer.
* tag 'renesas-drivers-for-v6.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Add support for RZ/N1 GPIO Interrupt Multiplexer
irqchip/renesas-rza1: Use for_each_of_imap_item iterator
irqchip/ls-extirq: Use for_each_of_imap_item iterator
of: unittest: Add a test case for for_each_of_imap_item iterator
of/irq: Introduce for_each_of_imap_item
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This reverts commit 5f0bf80cc5e04d31eeb201683e0b477c24bd18e7.
This was asked to be reverted as it is not the correct way to do this.
Fixes: 5f0bf80cc5e0 ("mmc: rtsx_pci: add quirk to disable MMC_CAP_AGGRESSIVE_PM for RTS525A")
Cc: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit eac85fbd0867c25ac517f58fae401d65c627edff.
This is not the correct change, so revert it for now.
Fixes: eac85fbd0867 ("mmc: rtsx: reset power state on suspend")
Cc: Matthew Schwartz <matthew.schwartz@linux.dev>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Linux 6.19 merge window added the new BLKREPORTZONESV2 ioctl, and
with it the new BLK_ZONE_REP_CACHED and BLK_ZONE_COND_ACTIVE constants.
The two constants are defined as part of enums, which makes it very
painful for userspace to discover if they are present in the installed
system headers.
Use the #define to the same name trick to make them trivially
discoverable using CPP directives.
Fixes: 0bf0e2e46668 ("block: track zone conditions")
Fixes: b30ffcdc0c15 ("block: introduce BLKREPORTZONESV2 ioctl")
Reported-by: Andrey Albershteyn <aalbersh@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The vdpu381 decoder found on newer Rockchip SoC need the information
from the long term and short term ref pic sets from the SPS.
So far, it wasn't included in the v4l2 API, so add it with new dynamic
sized controls.
Each element of the hevc_ext_sps_lt_rps array contains the long term ref
pic set at that index.
Each element of the hevc_ext_sps_st_rps contains the short term ref pic
set at that index, as the raw data.
It is the role of the drivers to calculate the reference sets values.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a function cs_amp_devm_get_vendor_specific_variant_id() to return
a vendor-specific hardware identifier string (if there is one) and use
it to fetch an identifier from Dell SSIDExV2 UEFI variable content.
Dell use the same PCI SSID on multiple products that might have different
audio hardware and thus need different firmware for the amplifier DSP.
The SSIDExV2 string contains additional system identifiers, and the
second field is a 2-character audio hardware identifier.
There are older Dell models with Cirrus Logic amplifiers that have the
SSIDExV2 UEFI variable but do not have the 2-character audio ID in the
second field. The SSIDExV2 is ignored if the second field is not
2 characters.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since we can only inspect dmabuf by iterating over process FDs or the
dmabuf_list, we need to add our own tracepoints to track its status in
real time in production.
For example:
binder:3016_1-3102 [006] ...1. 255.126521: dma_buf_export: exp_name=qcom,system size=12685312 ino=2738
binder:3016_1-3102 [006] ...1. 255.126528: dma_buf_fd: exp_name=qcom,system size=12685312 ino=2738 fd=8
binder:3016_1-3102 [006] ...1. 255.126642: dma_buf_mmap_internal: exp_name=qcom,system size=28672 ino=2739
kworker/6:1-86 [006] ...1. 255.127194: dma_buf_put: exp_name=qcom,system size=12685312 ino=2738
RenderThread-9293 [006] ...1. 316.618179: dma_buf_get: exp_name=qcom,system size=12771328 ino=2762 fd=176
RenderThread-9293 [006] ...1. 316.618195: dma_buf_dynamic_attach: exp_name=qcom,system size=12771328 ino=2762 attachment:ffffff880a18dd00 is_dynamic=0 dev_name=kgsl-3d0
RenderThread-9293 [006] ...1. 318.878220: dma_buf_detach: exp_name=qcom,system size=12771328 ino=2762 attachment:ffffff880a18dd00 is_dynamic=0 dev_name=kgsl-3d0
Signed-off-by: Xiang Gao <gaoxiang17@xiaomi.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260109115411.115270-1-gxxa03070307@gmail.com
|
|
Add a helper to allow an existing bio to be resubmitted without
having to re-add the payload.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The IOMMU code operates on physical addresses which can be outside
of system RAM.
Add a new function page_ext_get_from_phys() to abstract the logic of
checking the address and returning the page_ext.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 DeviceTree fixes for v6.19
Add missing power-domains to the SC8280XP RPM power-domain and ensure
these are voted for from the remoteproc instances while powering them
up.
Clear a couple of DeviceTree validation warnings in SM8550 and SM8650
USB controller nodes.
Specify the correct display panel on the OnePlus 6.
Correct the UFS clock mapping on Talos, to ensure UFS is properly
clocked.
Add Abel's old emails address to .mailmap.
* tag 'qcom-arm64-fixes-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm8650: Fix compile warnings in USB controller node
arm64: dts: qcom: sm8550: Fix compile warnings in USB controller node
arm64: dts: qcom: sc8280xp: Add missing VDD_MXC links
pmdomain: qcom: rpmhpd: Add MXC to SC8280XP
dt-bindings: power: qcom,rpmpd: Add SC8280XP_MXC_AO
arm64: dts qcom: sdm845-oneplus-enchilada: Specify panel name within the compatible
mailmap: Update email address for Abel Vesa
arm64: dts: qcom: talos: Correct UFS clocks ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The PMF driver retrieves NPU metrics data from the PMFW. Introduce a new
interface to make NPU metrics accessible to other drivers like AMDXDNA
driver, which can access and utilize this information as needed.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
[lizhi: save return value of is_npu_metrics_supported() and return it]
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260115173448.403826-1-lizhi.hou@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The hibernate resume sequence involves loading a resume kernel that is just
used for loading the hibernate image before shifting back to the existing
kernel.
During that hibernate resume sequence the resume kernel may have loaded
the ccp driver. If this happens the resume kernel will also have called
PSP_CMD_TEE_RING_INIT but it will never have called
PSP_CMD_TEE_RING_DESTROY.
This is problematic because the existing kernel needs to re-initialize the
ring. One could argue that the existing kernel should call destroy
as part of restore() but there is no guarantee that the resume kernel did
or didn't load the ccp driver. There is also no callback opportunity for
the resume kernel to destroy before handing back control to the existing
kernel.
Similar problems could potentially exist with the use of kdump and
crash handling. I actually reproduced this issue like this:
1) rmmod ccp
2) hibernate the system
3) resume the system
4) modprobe ccp
The resume kernel will have loaded ccp but never destroyed and then when
I try to modprobe it fails.
Because of these possible cases add a flow that checks the error code from
the PSP_CMD_TEE_RING_INIT call and tries to call PSP_CMD_TEE_RING_DESTROY
if it failed. If this succeeds then call PSP_CMD_TEE_RING_INIT again.
Fixes: f892a21f51162 ("crypto: ccp - use generic power management")
Reported-by: Lars Francke <lars.francke@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/CAD-Ua_gfJnQSo8ucS_7ZwzuhoBRJ14zXP7s8b-zX3ZcxcyWePw@mail.gmail.com/
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260116041132.153674-6-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The HDMI 2.1 specification introduced the Fixed Rate Link (FRL) mode,
aiming to replace the older Transition-Minimized Differential Signaling
(TMDS) mode used in previous HDMI versions to support much higher
bandwidths (up to 48 Gbps) for modern video and audio formats.
FRL has been designed to support ultra high resolution formats at high
refresh rates like 8K@60Hz or 4K@120Hz, and eliminates the need for
dynamic bandwidth adjustments, which reduces latency. It operates with
3 or 4 lanes at different link rates: 3Gbps, 6Gbps, 8Gbps, 10Gbps or
12Gbps.
Add support for configuring the FRL mode for HDMI PHYs.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-1-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
__sprint_symbol() might access an invalid pointer when
kallsyms_lookup_buildid() returns a symbol found by
ftrace_mod_address_lookup().
The ftrace lookup function must set both @modname and @modbuildid the same
way as module_address_lookup().
Link: https://lkml.kernel.org/r/20251128135920.217303-7-pmladek@suse.com
Fixes: 9294523e3768 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
bpf_address_lookup() has been used only in kallsyms_lookup_buildid(). It
was supposed to set @modname and @modbuildid when the symbol was in a
module.
But it always just cleared @modname because BPF symbols were never in a
module. And it did not clear @modbuildid because the pointer was not
passed.
The wrapper is no longer needed. Both @modname and @modbuildid are now
always initialized to NULL in kallsyms_lookup_buildid().
Remove the wrapper and rename __bpf_address_lookup() to
bpf_address_lookup() because this variant is used everywhere.
[akpm@linux-foundation.org: fix loongarch]
Link: https://lkml.kernel.org/r/20251128135920.217303-6-pmladek@suse.com
Fixes: 9294523e3768 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a helper function for reading the optional "build_id" member of struct
module. It is going to be used also in ftrace_mod_address_lookup().
Use "#ifdef" instead of "#if IS_ENABLED()" to match the declaration of the
optional field in struct module.
Link: https://lkml.kernel.org/r/20251128135920.217303-4-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Add ARRAY_END(), and use it to fix off-by-one bugs", v6.
Add ARRAY_END(), and use it to fix off-by-one bugs
ARRAY_END() is a macro to calculate a pointer to one past the last element
of an array argument. This is a very common pointer, which is used to
iterate over all elements of an array:
for (T *p = a; p < ARRAY_END(a); p++)
...
Of course, this pointer should never be dereferenced. A pointer one past
the last element of an array should not be dereferenced; it's perfectly
fine to hold such a pointer --and a good thing to do--, but the only thing
it should be used for is comparing it with other pointers derived from the
same array.
Due to how special these pointers are, it would be good to use consistent
naming. It's common to name such a pointer 'end' --in fact, we have many
such cases in the kernel--. C++ even standardized this name with
std::end(). Let's try naming such pointers 'end', and try also avoid
using 'end' for pointers that are not the result of ARRAY_END().
It has been incorrectly suggested that these pointers are dangerous, and
that they should never be used, suggesting to use something like
#define ARRAY_LAST(a) ((a) + ARRAY_SIZE(a) - 1)
for (T *p = a; p <= ARRAY_LAST(a); p++)
...
This is bogus, as it doesn't scale down to arrays of 0 elements. In the
case of an array of 0 elements, ARRAY_LAST() would underflow the pointer,
which not only it can't be dereferenced, it can't even be held (it
produces Undefined Behavior). That would be a footgun. Such arrays don't
exist per the ISO C standard; however, GCC supports them as an extension
(with partial support, though; GCC has a few bugs which need to be fixed).
This patch set fixes a few places where it was intended to use the array
end (that is, one past the last element), but accidentally a pointer to
the last element was used instead, thus wasting one byte.
It also replaces other places where the array end was correctly calculated
with ARRAY_SIZE(), by using the simpler ARRAY_END().
Also, there was one drivers/ file that already defined this macro. We
remove that definition, to not conflict with this one.
This patch (of 4):
ARRAY_END() returns a pointer one past the end of the last element in the
array argument. This pointer is useful for iterating over the elements of
an array:
for (T *p = a, p < ARRAY_END(a); p++)
...
Link: https://lkml.kernel.org/r/cover.1765449750.git.alx@kernel.org
Link: https://lkml.kernel.org/r/5973cfb674192bc8e533485dbfb54e3062896be1.1765449750.git.alx@kernel.org
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Christopher Bazley <chris.bazley.wg14@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Marco Elver <elver@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__tlb_remove_page_size() is only used in tlb_remove_page_size() with
@delay_remap set to false and it is passed directly to
__tlb_remove_folio_pages_size().
Remove @delay_remap of __tlb_remove_page_size() and call
__tlb_remove_folio_pages_size() with false @delay_remap.
Link: https://lkml.kernel.org/r/20251231030026.15938-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several helper functions for managing node and zone states have become
obsolete and no longer have any callers within the kernel.
inc_node_state()
inc_zone_state()
dec_zone_state()
This commit removes the dead code.
Link: https://lkml.kernel.org/r/20251225210213.2553-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reintroduces a concept removed by: commit d6cb41cc44c6 ("mm, hugetlb:
remove hugepages_treat_as_movable sysctl")
This sysctl provides flexibility between ZONE_MOVABLE use cases:
1) onlining memory in ZONE_MOVABLE to maintain hotplug compatibility
2) onlining memory in ZONE_MOVABLE to make hugepage allocate reliable
When ZONE_MOVABLE is used to make huge page allocation more reliable,
disallowing gigantic pages memory in this region is pointless. If hotplug
is not a requirement, we can loosen the restrictions to allow 1GB gigantic
pages in ZONE_MOVABLE.
Since 1GB can be difficult to migrate / has impacts on compaction /
defragmentation, we don't enable this by default. Notably, 1GB pages can
only be migrated if another 1GB page is available - so hot-unplug will
fail if such a page cannot be found.
However, since there are scenarios where gigantic pages are migratable, we
should allow use of these on movable regions.
When not valid 1GB is available for migration, hot-unplug will retry
indefinitely (or until interrupted). For example:
echo 0 > node0/hugepages/..-1GB/nr_hugepages # clear node0 1GB pages
echo 1 > node1/hugepages/..-1GB/nr_hugepages # reserve node1 1GB page
./alloc_huge_node1 & # Allocate a 1GB page on node1
./node1_offline & # attempt to offline all node1 memory
echo 1 > node0/hugepages/..-1GB/nr_hugepages # reserve node0 1GB page
In this example, node1_offline will block indefinitely until the final
step, when a node0 1GB page is made available.
Note: Boot-time CMA is not possible for driver-managed hotplug memory, as
CMA requires the memory to be registered as SystemRAM at boot time.
Additionally, 1GB huge pages are not supported by THP.
Link: https://lkml.kernel.org/r/20251221125603.2364174-1-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: David Rientjes <rientjes@google.com>
Link: https://lore.kernel.org/all/20180201193132.Hk7vI_xaU%25akpm@linux-foundation.org/
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "David Hildenbrand (Red Hat)" <david@kernel.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit d24062914837 ("fork: use __mt_dup() to duplicate maple tree in
dup_mmap()"), removed the only user and mas_expected_entries has been
removed, since commit e3852a1213ffc ("maple_tree: Drop bulk insert
support"). Also cleanup the mas_expected_entries in maple_tree.h.
No functional change.
Link: https://lkml.kernel.org/r/20251106110929.3522073-1-guanwentao@uniontech.com
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cheng Nie <niecheng1@uniontech.com>
Cc: Guan Wentao <guanwentao@uniontech.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current description of contexts where it's invalid to make GFP_ATOMIC
and GFP_NOWAIT calls is rather vague.
Replace this with a direct description of the actual contexts of concern
and refer to the RT docs where this is explained more discursively.
While rejigging this prose, also move the documentation of GFP_NOWAIT to
the GFP_NOWAIT section.
Link: https://lore.kernel.org/all/d912480a-5229-4efe-9336-b31acded30f5@suse.cz/
Link: https://lkml.kernel.org/r/20251219-b4-gfp_atomic-comment-v2-1-4c4ce274c2b6@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use bool for 'hashdist' and replace simple_strtoul() with kstrtobool() for
parsing the 'hashdist=' boot parameter. Unlike simple_strtoul(), which
returns an unsigned long, kstrtobool() converts the string directly to
bool and avoids implicit casting.
Check the return value of kstrtobool() and reject invalid values. This
adds error handling while preserving behavior for existing values, and
removes use of the deprecated simple_strtoul() helper. The current code
silently sets 'hashdist = 0' if parsing fails, instead of leaving the
default value (HASHDIST_DEFAULT) unchanged.
Additionally, kstrtobool() accepts common boolean strings such as "on" and
"off".
Link: https://lkml.kernel.org/r/20251217110214.50807-1-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
struct maple_alloc is deprecated after the maple tree conversion to
sheaves, remove the references from the header file.
Link: https://lkml.kernel.org/r/20251203224511.469978-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Laptop mode was introduced to save battery, by delaying and consolidating
writes and thereby maximize the time rotating hard drives wouldn't have to
spin.
Luckily, rotating hard drives, with their high spin-up times and power
draw, are a thing of the past for battery-powered devices. Reclaim has
also since changed to not write single filesystem pages anymore, and
regular filesystem writeback is lumpy by design.
The juice doesn't appear worth the squeeze anymore. The footprint of the
feature is small, but nevertheless it's a complicating factor in mm,
block, filesystems. Developers don't think about it, and it likely hasn't
been tested with new reclaim and writeback changes in years.
Let's sunset it. Keep the sysctl with a deprecation warning around for a
few more cycles, but remove all functionality behind it.
[akpm@linux-foundation.org: fix Documentation/admin-guide/laptops/index.rst]
Link: https://lkml.kernel.org/r/20251216185201.GH905277@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON users can read DAMOS stats via DAMON sysfs interface. It enables
efficient, simple and flexible usages of the stats. Especially for
systems not having advanced tools like perf or bpftrace, that can be
useful. But if the advanced tools are available, exposing the stats via
tracepoint can reduce unnecessary reimplementation of the wheels. Add a
new tracepoint for DAMOS stats, namely damos_stat_after_apply_interval.
The tracepoint is triggered for each scheme's apply interval and exposes
the whole stat values. If the user needs sub-apply interval information
for any chance, damos_before_apply tracepoint could be used.
Link: https://lkml.kernel.org/r/20251216080128.42991-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are DAMOS use cases that require user-space centric control of its
activation and deactivation. Having the control plane on the user-space,
or using DAMOS as a way for monitoring results collection are such
examples.
DAMON parameters online commit, DAMOS quotas and watermarks can be useful
for this purpose. However, those features work only at the
sub-DAMON-snapshot level. In some use cases, the DAMON-snapshot level
control is required. For example, in DAMOS-based monitoring results
collection use case, the user online-installs a DAMOS scheme with
DAMOS_STAT action, wait it be applied to whole regions of a single
DAMON-snapshot, retrieves the stats and tried regions information, and
online-uninstall the scheme. It is efficient to ensure the lifetime of
the scheme as no more no less one snapshot consumption.
To support such use cases, introduce a new DAMOS core API per-scheme
parameter, namely max_nr_snapshots. As the name implies, it is the upper
limit of nr_snapshots, which is a DAMOS stat that represents the number of
DAMON-snapshots that the scheme has fully applied. If the limit is set
with a non-zero value and nr_snapshots reaches or exceeds the limit, the
scheme is deactivated.
Link: https://lkml.kernel.org/r/20251216080128.42991-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 0e92c2ee9f45 ("mm/damon/schemes: account scheme actions that
successfully applied") has replaced ->stat_count and ->stat_sz of 'struct
damos' with ->stat. The commit mistakenly did not update the related
kernel doc comment, though. Update the comment.
Link: https://lkml.kernel.org/r/20251216080128.42991-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: introduce {,max_}nr_snapshots and tracepoint for
damos stats".
Introduce three changes for improving DAMOS stat's provided information,
deterministic control, and reading usability.
DAMOS provides stats that are important for understanding its behavior.
It lacks information about how many DAMON-generated monitoring output
snapshots it has worked on. Add a new stat, nr_snapshots, to show the
information.
Users can control DAMOS schemes in multiple ways. Using the online
parameters commit feature, they can install and uninstall DAMOS schemes
whenever they want while keeping DAMON runs. DAMOS quotas and watermarks
can be used for manually or automatically turning on/off or adjusting the
aggressiveness of the scheme. DAMOS filters can be used for applying the
scheme to specific memory entities based on their types and locations.
Some users want their DAMOS scheme to be applied to only specific number
of DAMON snapshots, for more deterministic control. One example use case
is tracepoint based snapshot reading. Add a new knob, max_nr_snapshots,
to support this. If the nr_snapshots parameter becomes same to or greater
than the value of this parameter, the scheme is deactivated.
Users can read DAMOS stats via DAMON's sysfs interface. For deep level
investigations on environments having advanced tools like perf and
bpftrace, exposing the stats via a tracepoint can be useful. Implement a
new tracepoint, namely damon:damos_stat_after_apply_interval.
First five patches (patches 1-5) of this series implement the new stat,
nr_snapshots, on the core layer (patch 1), expose on DAMON sysfs user
interface (patch 2), and update documents (patches 3-5).
Following six patches (patches 6-11) are for the new stat based DAMOS
deactivation (max_nr_snapshots). The first one (patch 6) of this group
updates a kernel-doc comment before making further changes. Then an
implementation of it on the core layer (patch 7), an introduction of a new
DAMON sysfs interface file for users of the feature (patch 8), and three
updates of the documents (patches 9-11) follow.
The final one (patch 12) introduces the new tracepoint that exposes the
DAMOS stat values for each scheme apply interval.
This patch (of 12):
DAMON generates monitoring results snapshots for every sampling interval.
DAMOS applies given schemes on the regions of the snapshots, for every
apply interval of the scheme.
DAMOS stat informs a given scheme has tried to how many memory entities
and applied, in the region and byte level. In some use cases including
user-space oriented tuning and investigations, it is useful to know that
in the DAMON-snapshot level. Introduce a new stat, namely nr_snapshots
for DAMON core API callers.
[sj@kernel.org: fix wrong list_is_last() call in damons_is_last_region()]
Link: https://lkml.kernel.org/r/20260114152049.99727-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20251216080128.42991-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20251216080128.42991-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In addition to slab objects, this function is used for resolving non-slab
kernel pointers. This has caused confusion in recent refactoring work.
Rename it to mem_cgroup_from_virt(), sticking with terminology established
by the virt_to_<foo>() converters.
Link: https://lore.kernel.org/linux-mm/20251113161424.GB3465062@cmpxchg.org/
Link: https://lkml.kernel.org/r/20251210154301.720133-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The mem_cgroup_size helper is used only in apply_proportional_protection
to read the current memory usage. Its semantics are unclear and
inconsistent with other sites, which directly call page_counter_read for
the same purpose.
Remove this helper and get its usage via mem_cgroup_protection for
clarity. Additionally, rename the local variable 'cgroup_size' to 'usage'
to better reflect its meaning.
No functional changes intended.
Link: https://lkml.kernel.org/r/20251211013019.2080004-3-chenridong@huaweicloud.com
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lu Jialin <lujialin4@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
