| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We are going to use these functions in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-4-jolsa@kernel.org
|
|
At the moment the we allow the jmp attach only for ftrace_ops that
has FTRACE_OPS_FL_JMP set. This conflicts with following changes
where we use single ftrace_ops object for all direct call sites,
so all could be be attached via just call or jmp.
We already limit the jmp attach support with config option and bit
(LSB) set on the trampoline address. It turns out that's actually
enough to limit the jmp attach for architecture and only for chosen
addresses (with LSB bit set).
Each user of register_ftrace_direct or modify_ftrace_direct can set
the trampoline bit (LSB) to indicate it has to be attached by jmp.
The bpf trampoline generation code uses trampoline flags to generate
jmp-attach specific code and ftrace inner code uses the trampoline
bit (LSB) to handle return from jmp attachment, so there's no harm
to remove the FTRACE_OPS_FL_JMP bit.
The fexit/fmodret performance stays the same (did not drop),
current code:
fentry : 77.904 ± 0.546M/s
fexit : 62.430 ± 0.554M/s
fmodret : 66.503 ± 0.902M/s
with this change:
fentry : 80.472 ± 0.061M/s
fexit : 63.995 ± 0.127M/s
fmodret : 67.362 ± 0.175M/s
Fixes: 25e4e3565d45 ("ftrace: Introduce FTRACE_OPS_FL_JMP")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-2-jolsa@kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.20, part two
Add DPU clock management unit nodes to Google GS101.
* tag 'samsung-dt64-6.20-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: gs101: add cmu_dpu and sysreg_dpu dt nodes
dt-bindings: clock: google,gs101-clock: Add DPU clock management unit
dt-bindings: clock: google,gs101-clock: fix alphanumeric ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a new "min_threads" variable to the nfsd_net, along with the
corresponding netlink interface, to set that value from userland.
Pass that value to svc_set_pool_threads() and svc_set_num_threads().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
To dynamically adjust the thread count, nfsd requires some information
about how busy things are.
Change svc_recv() to take a timeout value, and then allow the wait for
work to time out if it's set. If a timeout is not defined, then the
schedule will be set to MAX_SCHEDULE_TIMEOUT. If the task waits for the
full timeout, then have it return -ETIMEDOUT to the caller.
If it wakes up, finds that there is more work and that no threads are
available, then attempt to set SP_TASK_STARTING. If wasn't already set,
have the task return -EBUSY to cue to the caller that the service could
use more threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Break out the part of svc_start_kthreads() that creates a thread into
svc_new_thread(), as a new exported helper function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a new pool->sp_nrthrmin field to track the minimum number of threads
in a pool. Add min_threads parameters to both svc_set_num_threads() and
svc_set_pool_threads(). If min_threads is non-zero and less than the
max, svc_set_num_threads() will ensure that the number of running
threads is between the min and the max.
If the min is 0 or greater than the max, then it is ignored, and the
maximum number of threads will be started, and never spun down.
For now, the min_threads is always 0, but a later patch will pass the
proper value through from nfsd.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The kernel currently tracks the number of threads running in a pool in
the "sp_nrthreads" field. In the future, where threads are dynamically
spun up and down, it'll be necessary to keep track of the maximum number
of requested threads separately from the actual number running.
Add a pool->sp_nrthrmax parameter to track this. When userland changes
the number of threads in a pool, update that value accordingly.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_set_num_threads() will set the number of running threads for a given
pool. If the pool argument is set to NULL however, it will distribute
the threads among all of the pools evenly.
These divergent codepaths complicate the move to dynamic threading.
Simplify the API by splitting these two cases into different helpers:
Add a new svc_set_pool_threads() function that sets the number of
threads in a single, given pool. Modify svc_set_num_threads() to
distribute the threads evenly between all of the pools and then call
svc_set_pool_threads() for each.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Some endpoint platforms have only a small number of usable BARs. At the
same time, EPF drivers (e.g. vNTB) may need multiple independent inbound
regions (control/scratchpad, one or more memory windows, and optionally
MSI or other feature-related regions). Subrange mapping allows these to
share a single BAR without consuming additional BARs that may not be
available, or forcing a fragile layout by aggressively packing into a
single contiguous memory range.
Extend the PCI endpoint core to support mapping subranges within a BAR.
Add an optional 'submap' field in struct pci_epf_bar so an endpoint
function driver can request inbound mappings that fully cover the BAR.
Introduce a new EPC feature bit, subrange_mapping, and reject submap
requests from pci_epc_set_bar() unless the controller advertises both
subrange_mapping and dynamic_inbound_mapping features.
The submap array describes the complete BAR layout (no overlaps and no
gaps are allowed to avoid exposing untranslated address ranges). This
provides the generic infrastructure needed to map multiple logical
regions into a single BAR at different offsets, without assuming a
controller-specific inbound address translation mechanism.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260124145012.2794108-3-den@valinux.co.jp
|
|
Introduce a new EPC feature bit (dynamic_inbound_mapping) that indicates
whether an Endpoint Controller can update the inbound address
translation for a BAR without requiring the EPF driver to clear/reset
the BAR first.
Endpoint Function drivers (e.g. vNTB) can use this information to decide
whether it really is safe to call pci_epc_set_bar() multiple times to
update inbound mappings for the BAR.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260124145012.2794108-2-den@valinux.co.jp
|
|
Add a new flag that request bounce buffering for direct I/O. This is
needed to provide the stable pages requirement requested by devices
that need to calculate checksums or parity over the data and allows
file systems to properly work with things like T10 protection
information. The implementation just calls out to the new bio bounce
buffering helpers to allocate a bounce buffer, which is used for
I/O and to copy to/from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add helpers to implement bounce buffering of data into a bio to implement
direct I/O for cases where direct user access is not possible because
stable in-flight data is required. These are intended to be used as
easily as bio_iov_iter_get_pages for the zero-copy path.
The write side is trivial and just copies data into the bounce buffer.
The read side is a lot more complex because it needs to perform the copy
from the completion context, and without preserving the iov_iter through
the call chain. It steals a trick from the integrity data user interface
and uses the first vector in the bio for the bounce buffer data that is
fed to the block I/O stack, and uses the others to record the user
buffer fragments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Massage __bio_iov_iter_get_pages so that it doesn't need the bio, and
move it to lib/iov_iter.c so that it can be used by block code for
other things than filling a bio and by other subsystems like netfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently the only constant for the maximum bio size is BIO_MAX_SECTORS,
which is in units of 512-byte sectors, but a lot of user need a byte
limit.
Add a BIO_MAX_SIZE constant, redefine BIO_MAX_SECTORS in terms of it, and
switch all bio-related uses of UINT_MAX for the maximum size to use the
symbolic names instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
The keyboard brightness control of Asus WMI keyboards is handled in
kernel, which leads to the shortcut going from brightness 0, to 1,
to 2, and 3.
However, for HID keyboards it is exposed as a key and handled by the
user's desktop environment. For the toggle button, this means that
brightness control becomes on/off. In addition, in the absence of a
DE, the keyboard brightness does not work.
Therefore, expose an event handler for the keyboard brightness control
which can then be used by hid-asus. Since this handler is called from
an interrupt context, defer the actual work to a workqueue.
In the process, introduce ASUS_EV_MAX_BRIGHTNESS to hold the constant
for maximum brightness since it is shared between hid-asus/asus-wmi.
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Tested-by: Luke D. Jones <luke@ljones.dev>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260122075044.5070-11-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The quirk for selecting whether keyboard backlight should be controlled
by HID or WMI is not needed anymore, so remove the file containing it.
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260122075044.5070-10-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some devices, such as the Z13 have multiple Aura devices connected
to them by USB. In addition, they might have a WMI interface for
RGB. In Windows, Armoury Crate exposes a unified brightness slider
for all of them, with 3 brightness levels.
Therefore, to be synergistic in Linux, and support existing tooling
such as UPower, allow adding listeners to the RGB device of the WMI
interface. If WMI does not exist, lazy initialize the interface.
Since hid-asus and asus-wmi can both interact with the led objects
including from an atomic context, protect the brightness access with a
spinlock and update the values from a workqueue. Use this workqueue to
also process WMI keyboard events, so they are handled asynchronously.
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20260122075044.5070-8-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Merge series from Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>:
This patch series improves handling of SPI controllers that are
shared by spi-mem devices and other SPI peripherals.
The primary goal of this series is to support non-spi-mem devices in
the ASPEED FMC/SPI controller driver. It also addresses an issue in
the spi-mem framework observed when different types of SPI devices
operate concurrently on the same controller, ensuring that spi-mem
operations are properly serialized.
|
|
svc_rdma_accept() computes sc_sq_depth as the sum of rq_depth and the
number of rdma_rw contexts (ctxts). This value is used to allocate the
Send CQ and to initialize the sc_sq_avail credit pool.
However, when the device uses memory registration for RDMA operations,
rdma_rw_init_qp() inflates the QP's max_send_wr by a factor of three
per context to account for REG and INV work requests. The Send CQ and
credit pool remain sized for only one work request per context,
causing Send Queue exhaustion under heavy NFS WRITE workloads.
Introduce rdma_rw_max_sge() to compute the actual number of Send Queue
entries required for a given number of rdma_rw contexts. Upper layer
protocols call this helper before creating a Queue Pair so that their
Send CQs and credit accounting match the QP's true capacity.
Update svc_rdma_accept() to use rdma_rw_max_sge() when computing
sc_sq_depth, ensuring the credit pool reflects the work requests
that rdma_rw_init_qp() will reserve.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 00bd1439f464 ("RDMA/rw: Support threshold for registration vs scattering to local pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-5-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The bvec-based RDMA API currently returns -EOPNOTSUPP when Memory
Region registration is required. This prevents iWARP devices from
using the bvec path, since iWARP requires MR registration for RDMA
READ operations. The force_mr debug parameter is also unusable with
bvec input.
Add rdma_rw_init_mr_wrs_bvec() to handle MR registration for bvec
arrays. The approach creates a synthetic scatterlist populated with
DMA addresses from the bvecs, then reuses the existing ib_map_mr_sg()
infrastructure. This avoids driver changes while keeping the
implementation small.
The synthetic scatterlist is stored in the rdma_rw_ctx for cleanup.
On destroy, the MRs are returned to the pool and the bvec DMA
mappings are released using the stored addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-4-cel@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The bvec RDMA API maps each bvec individually via dma_map_phys(),
requiring an IOTLB sync for each mapping. For large I/O operations
with many bvecs, this overhead becomes significant.
The two-step IOVA API (dma_iova_try_alloc / dma_iova_link /
dma_iova_sync) allocates a contiguous IOVA range upfront, links
all physical pages without IOTLB syncs, then performs a single
sync at the end. This reduces IOTLB flushes from O(n) to O(1).
It also requires only a single output dma_addr_t compared to extra
per-input element storage in struct scatterlist.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-3-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The existing rdma_rw_ctx_init() API requires callers to construct a
scatterlist, which is then DMA-mapped page by page. Callers that
already have data in bio_vec form (such as the NVMe-oF target) must
first convert to scatterlist, adding overhead and complexity.
Introduce rdma_rw_ctx_init_bvec() and rdma_rw_ctx_destroy_bvec() to
accept bio_vec arrays directly. The new helpers use dma_map_phys()
for hardware RDMA devices and virtual addressing for software RDMA
devices (rxe, siw), avoiding intermediate scatterlist construction.
Memory registration (MR) path support is deferred to a follow-up
series; callers requiring MR-based transfers (iWARP devices or
force_mr=1) receive -EOPNOTSUPP and should use the scatterlist API.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-2-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-7.0-merge
xfs: autonomous self healing of filesystems [v7]
This patchset builds new functionality to deliver live information about
filesystem health events to userspace. This is done by creating an
anonymous file that can be read() for events by userspace programs.
Events are captured by hooking various parts of XFS and iomap so that
metadata health failures, file I/O errors, and major changes in
filesystem state (unmounts, shutdowns, etc.) can be observed by
programs.
When an event occurs, the hook functions queue an event object to each
event anonfd for later processing. Programs must have CAP_SYS_ADMIN
to open the anonfd and there's a maximum event lag to prevent resource
overconsumption. The events themselves can be read() from the anonfd
as C structs for the xfs_healer daemon.
In userspace, we create a new daemon program that will read the event
objects and initiate repairs automatically. This daemon is managed
entirely by systemd and will not block unmounting of the filesystem
unless repairs are ongoing. They are auto-started by a starter
service that uses fanotify.
This patchset depends on the new fserror code that Christian Brauner
has tentatively accepted for Linux 7.0:
https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs.git/log/?h=vfs-7.0.fserror
v7: more cleanups of the media verification ioctl, improve comments, and
reuse the bio
v6: fix pi-breaking bugs, make verify failures trigger health reports
and filter bio status flags better
v5: add verify-media ioctl, collapse small helper funcs with only
one caller
v4: drop multiple client support so we can make direct calls into
healthmon instead of chasing pointers and doing indirect calls
v3: drag out of rfc status
With a bit of luck, this should all go splendidly.
Conflicts:
This merge required an update on files:
- fs/xfs/xfs_healthmon.c
- fs/xfs/xfs_verify_media.c
Such change was required because a parallel developement changed
XFS header file xfs.h naming to xfs_platform.h, so the merge
required to update those includes in both files above
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Eliminate all kernel-doc warnings in seqlock.h:
- correct the macro to have "()" immediately following the macro name
- don't include the macro parameters in the short description (first line)
- make the parameter names in the comments match the actual macro
parameter names.
- use "::" for the Example
WARNING: include/linux/seqlock.h:1341 This comment starts with '/**', but isn't a kernel-doc comment.
* scoped_seqlock_read (lock, ss_state) - execute the read side critical
Documentation/locking/seqlock:242: include/linux/seqlock.h:1351: WARNING:
Definition list ends without a blank line; unexpected unindent. [docutils]
Warning: include/linux/seqlock.h:1357 function parameter '_seqlock' not described in 'scoped_seqlock_read'
Warning: include/linux/seqlock.h:1357 function parameter '_target' not described in 'scoped_seqlock_read'
Fixes: cc39f3872c08 ("seqlock: Introduce scoped_seqlock_read()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260123183749.3997533-1-rdunlap@infradead.org
|
|
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This commit fixes a security issue where BPF_PROG_DETACH on tcx or
netkit devices could be executed by any user when no program fd was
provided, bypassing permission checks. The fix adds a capability
check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case.
Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Signed-off-by: Guillaume Gonnet <ggonnet.linux@gmail.com>
Link: https://lore.kernel.org/r/20260127160200.10395-1-ggonnet.linux@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As the stmmac_priv struct is passed to the fix_soc_reset() method which
has the ioaddr, there is no need to pass ioaddr separately. Pass just
the stmmac_priv struct. Fix up the glues that use it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vkLmM-00000005vE1-0nop@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Now, all DAPM users are using function to handling it.
We can capsuling it. This patchset moves struct snd_soc_dapm_context into
soc-dapm.c, and remove un-used functions.
Link: https://lore.kernel.org/r/87zf7jrx52.wl-kuninori.morimoto.gx@renesas.com
|
|
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:
The main goal is to convert drivers to use GPIO descriptors. While reading
the code, I think it is time to remove ak4641 and pxa2xx-ac97 driver,
more info could be found in commit log of each patch.
Then only need to convert sound/arm/pxa2xx-ac97-lib.c to use GPIO
descriptors. Not have hardware to test the pxa2xx ac97.
|
|
Now that there are no users of the low-level SHA-1 interface, remove it.
Specifically:
- Remove SHA1_DIGEST_WORDS (no longer used)
- Remove sha1_init_raw() (no longer used)
- Rename sha1_transform() to sha1_block_generic() and make it static
- Move SHA1_WORKSPACE_WORDS into lib/crypto/sha1.c
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260123051656.396371-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add additional capabilities reporting.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
uapi/linux/pci_regs.h defines Primary/Secondary/Subordinate Bus Numbers
and Secondary Latency Timer (PCIe r7.0, sec. 7.5.1.3) as byte register
offsets, but in practice the code may read/write the entire dword. In the
lack of #defines to handle the dword fields, the code ends up using
literals which are not as easy to read.
Add dword field masks for the Bus Number and Secondary Latency Timer
fields and use them in probe.c.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash new #defines and uses together]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251219174036.16738-21-ilpo.jarvinen@linux.intel.com
Link: https://patch.msgid.link/20251219174036.16738-22-ilpo.jarvinen@linux.intel.com
|
|
PCI bridge window setup code includes special code to handle CardBus
bridges. CardBus has long since fallen out of favor and modern systems have
no use for it.
Move CardBus setup code to its own file and use existing CONFIG_CARDBUS to
decide whether it should be built or not.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251219174036.16738-18-ilpo.jarvinen@linux.intel.com
|
|
The caller may hold a const struct resource which will trigger an
unnecessary warning when calling resource_assigned() as it will not
modify res in any way.
Mark resource_assigned()'s struct resource *res parameter const to
avoid the compiler warning.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251219174036.16738-15-ilpo.jarvinen@linux.intel.com
|
|
Update EPP (Energy Performance Preference) constants for more clarity:
- Add CPPC_EPP_PERFORMANCE_PREF (0x00) for performance preference.
- Rename CPPC_ENERGY_PERF_MAX to CPPC_EPP_ENERGY_EFFICIENCY_PREF (0xFF)
for energy efficiency.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260120145623.2959636-4-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
- Remove redundant energy_perf field from 'struct cppc_perf_caps' as
the same is available in 'struct cppc_perf_ctrls' which is used.
- Move the 'auto_sel' field from 'struct cppc_perf_caps' to
'struct cppc_perf_ctrls' as it represents a control register.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20260120145623.2959636-3-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the driver can make an assertion whether a connected panel is an OLED
panel or not then it can attach a property to the connector that userspace
can use as a hint for color schemes.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Link: https://patch.msgid.link/20260106170017.68158-2-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
Currently a few pointer dereferences need to be made to both check if
BPF filters are installed, and then also to retrieve the actual filter
for the opcode. Cache the table in ctx->bpf_filters to avoid that.
Add a bit of debug info on ring exit to show if we ever got this wrong.
Small risk of that given that the table is currently only updated in one
spot, but once task forking is enabled, that will add one more spot.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This adds custom filtering for IORING_OP_OPENAT and IORING_OP_OPENAT2,
where the open_how flags, mode, and resolve can be checked by filters.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Example population method for the BPF based opcode filtering. This
exposes the socket family, type, and protocol to a registered BPF
filter. This in turn enables the filter to make decisions based on
what was passed in to the IORING_OP_SOCKET request type.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for loading classic BPF programs with io_uring to provide
fine-grained filtering of SQE operations. Unlike
IORING_REGISTER_RESTRICTIONS which only allows bitmap-based allow/deny
of opcodes, BPF filters can inspect request attributes and make dynamic
decisions.
The filter is registered via IORING_REGISTER_BPF_FILTER with a struct
io_uring_bpf:
struct io_uring_bpf_filter {
__u32 opcode; /* io_uring opcode to filter */
__u32 flags;
__u32 filter_len; /* number of BPF instructions */
__u32 resv;
__u64 filter_ptr; /* pointer to BPF filter */
__u64 resv2[5];
};
enum {
IO_URING_BPF_CMD_FILTER = 1,
};
struct io_uring_bpf {
__u16 cmd_type; /* IO_URING_BPF_* values */
__u16 cmd_flags; /* none so far */
__u32 resv;
union {
struct io_uring_bpf_filter filter;
};
};
and the filters get supplied a struct io_uring_bpf_ctx:
struct io_uring_bpf_ctx {
__u64 user_data;
__u8 opcode;
__u8 sqe_flags;
__u8 pdu_size;
__u8 pad[5];
};
where it's possible to filter on opcode and sqe_flags, with pdu_size
indicating how much extra data is being passed in beyond the pad field.
This will used for specific finer grained filtering inside an opcode.
An example of that for sockets is in one of the following patches.
Anything the opcode supports can end up in this struct, populated by
the opcode itself, and hence can be filtered for.
Filters have the following semantics:
- Return 1 to allow the request
- Return 0 to deny the request with -EACCES
- Multiple filters can be stacked per opcode. All filters must
return 1 for the opcode to be allowed.
- Filters are evaluated in registration order (most recent first)
The implementation uses classic BPF (cBPF) rather than eBPF for as
that's required for containers, and since they can be used by any
user in the system.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
Therefore, for sockmap, relying solely on copied_seq and rcv_nxt to
calculate FIONREAD is not enough.
This patch adds a new msg_tot_len field in the psock structure to record
the data length in ingress_msg. Additionally, we implement new ioctl
interfaces for TCP and UDP to intercept FIONREAD operations.
Note that we intentionally do not include sk_receive_queue data in the
FIONREAD result. Data in sk_receive_queue has not yet been processed by
the BPF verdict program, and may be redirected to other sockets or
dropped. Including it would create semantic ambiguity since this data
may never be readable by the user.
Unix and VSOCK sockets have similar issues, but fixing them is outside
the scope of this patch as it would require more intrusive changes.
Previous work by John Fastabend made some efforts towards FIONREAD support:
commit e5c6de5fa025 ("bpf, sockmap: Incorrectly handling copied_seq")
Although the current patch is based on the previous work by John Fastabend,
it is acceptable for our Fixes tag to point to the same commit.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20260124113314.113584-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
The issue is that when reading from ingress_msg, we update tp->copied_seq
by default. However, if the data is not from its own protocol stack,
tcp->rcv_nxt is not increased. Later, if we convert this socket to a
native socket, reading from this socket may fail because copied_seq might
be significantly larger than rcv_nxt.
This fix also addresses the syzkaller-reported bug referenced in the
Closes tag.
This patch marks the skmsg objects in ingress_msg. When reading, we update
copied_seq only if the data is from its own protocol stack.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Closes: https://syzkaller.appspot.com/bug?extid=06dbd397158ec0ea4983
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260124113314.113584-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, the BPF cgroup iterator supports walking descendants in
either pre-order (BPF_CGROUP_ITER_DESCENDANTS_PRE) or post-order
(BPF_CGROUP_ITER_DESCENDANTS_POST). These modes perform an exhaustive
depth-first search (DFS) of the hierarchy. In scenarios where a BPF
program may need to inspect only the direct children of a given parent
cgroup, a full DFS is unnecessarily expensive.
This patch introduces a new BPF cgroup iterator control option,
BPF_CGROUP_ITER_CHILDREN. This control option restricts the traversal
to the immediate children of a specified parent cgroup, allowing for
more targeted and efficient iteration, particularly when exhaustive
depth-first search (DFS) traversal is not required.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20260127085112.3608687-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce a bus specific probe and remove function. For now this only
allows to get rid of a cast of the generic device to an fsi device in
the drivers and changes the remove prototype to return void---a non-zero
return value is ignored anyhow.
The objective is to get rid of users of struct device callbacks
.probe(), .remove() and .shutdown() to eventually remove these.
Until all fsi drivers are converted this results in a runtime warning
about the drivers needing an update because there is a bus probe
function and a driver probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/3b53adb75a5ae7894736d46cb6eb85f5ef36520e.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are no users of fsi_bus_type outside of fsi-core.c, so make that
variable static, don't export it and drop the declaration from the
public header file.
As there is a usage of fsi_bus_type in fsi_create_device() the
definition of that variable must happen further up in the file to not
have to add a local declaration.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/bfd83034dec04d5a6b01a234988377fc6224614d.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Similar to wrappers for other subsystems provide inline functions for
fsi devices to store driver data.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/5de7a7cbb30918b3503235130bd8aa1a9a63d71c.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add GPL-2.0 license id to some files related to kdb and kgdb,
replacing references to GPL or COPYING.
These files were introduced into the kernel in 2008 and 2010.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
