| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The pci_dev is only used to provide the ethtool bus_info using
pci_name(priv->plat->pdev). This is the same as dev_name(priv->device).
Thus, rather than passing the pci_dev, make use of what we already
have.
To avoid unexpectedly exposing the device name through ethtool where
it wasn't provided before, add a flag priv->plat->provide_bus_info
to enable this, which only dwmac-intel needs to set.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1w0evI-0000000CzY7-1fyo@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver fixes from Greg KH:
"Here are some char/misc/iio/binder fixes for 7.0-rc4. Nothing major in
here, just the usual:
- lots of iio driver fixes for reported issues
- rust binder fixes for problems found
- gpib driver binding to the wrong device fix
- firmware driver fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (28 commits)
gpib: lpvo_usb: fix unintended binding of FTDI 8U232AM devices
firmware: stratix10-svc: Add Multi SVC clients support
rust_binder: use lock_vma_under_rcu() in use_page_slow()
rust_binder: call set_notification_done() without proc lock
rust_binder: avoid reading the written value in offsets array
rust_binder: check ownership before using vma
rust_binder: fix oneway spam detection
firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled
iio: imu: adis: Fix NULL pointer dereference in adis_init
iio: imu: inv_icm45600: fix regulator put warning when probe fails
iio: buffer: Fix wait_queue not being removed
iio: gyro: mpu3050-core: fix pm_runtime error handling
iio: gyro: mpu3050-i2c: fix pm_runtime error handling
iio: adc: ad7768-1: Fix ERR_PTR dereference in ad7768_fill_scale_tbl
iio: chemical: sps30_serial: fix buffer size in sps30_serial_read_meas()
iio: chemical: sps30_i2c: fix buffer size in sps30_i2c_read_meas()
iio: magnetometer: tlv493d: remove erroneous shift in X-axis data
iio: proximity: hx9023s: Protect against division by zero in set_samp_freq
iio: proximity: hx9023s: fix assignment order for __counted_by
iio: chemical: bme680: Fix measurement wait duration calculation
...
|
|
ip[6]tunnel_xmit() can drop packets if a too deep recursion level
is detected.
Add SKB_DROP_REASON_RECURSION_LIMIT drop reason.
We will use this reason later in __dev_queue_xmit().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260312201824.203093-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default, the Linux TCP implementation does not shrink the
advertised window (RFC 7323 calls this "window retraction") with the
following exceptions:
- When an incoming segment cannot be added due to the receive buffer
running out of memory. Since commit 8c670bdfa58e ("tcp: correct
handling of extreme memory squeeze") a zero window will be
advertised in this case. It turns out that reaching the required
memory pressure is easy when window scaling is in use. In the
simplest case, sending a sufficient number of segments smaller than
the scale factor to a receiver that does not read data is enough.
- Commit b650d953cd39 ("tcp: enforce receive buffer memory limits by
allowing the tcp window to shrink") addressed the "eating memory"
problem by introducing a sysctl knob that allows shrinking the
window before running out of memory.
However, RFC 7323 does not only state that shrinking the window is
necessary in some cases, it also formulates requirements for TCP
implementations when doing so (Section 2.4).
This commit addresses the receiver-side requirements: After retracting
the window, the peer may have a snd_nxt that lies within a previously
advertised window but is now beyond the retracted window. This means
that all incoming segments (including pure ACKs) will be rejected
until the application happens to read enough data to let the peer's
snd_nxt be in window again (which may be never).
To comply with RFC 7323, the receiver MUST honor any segment that
would have been in window for any ACK sent by the receiver and, when
window scaling is in effect, SHOULD track the maximum window sequence
number it has advertised. This patch tracks that maximum window
sequence number rcv_mwnd_seq throughout the connection and uses it in
tcp_sequence() when deciding whether a segment is acceptable.
rcv_mwnd_seq is updated together with rcv_wup and rcv_wnd in
tcp_select_window(). If we count tcp_sequence() as fast path, it is
read in the fast path. Therefore, rcv_mwnd_seq is put into rcv_wnd's
cacheline group.
The logic for handling received data in tcp_data_queue() is already
sufficient and does not need to be updated.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260309-tcp_rfc7323_retract_wnd_rfc-v3-1-4c7f96b1ec69@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge upstream io_uring fixes to avoid conflicts in later patches.
* io_uring-7.0:
io_uring/kbuf: check if target buffer list is still legacy on recycle
io_uring: fix physical SQE bounds check for SQE_MIXED 128-byte ops
io_uring/eventfd: use ctx->rings_rcu for flags checking
io_uring: ensure ctx->rings is stable for task work flags manipulation
io_uring/bpf_filter: use bpf_prog_run_pin_on_cpu() to prevent migration
io_uring/register: fix comment about task_no_new_privs
|
|
A bio segment may have partial interval block data with the rest
continuing into the next segments because direct-io data payloads only
need to align in memory to the device's DMA limits.
At the same time, the protection information may also be split in
multiple segments. The most likely way that may happen is if two
requests merge, or if we're directly using the io_uring user metadata.
The generate/verify, however, only ever accessed the first bip_vec.
Further, it may be possible to unalign the protection fields from the
user space buffer, or if there are odd additional opaque bytes in front
or in back of the protection information metadata region.
Change up the iteration to allow spanning multiple segments. This patch
is mostly a re-write of the protection information handling to allow any
arbitrary alignments, so it's probably easier to review the end result
rather than the diff.
Many controllers are not able to handle interval data composed of
multiple segments when PI is used, so this patch introduces a new
integrity limit that a low level driver can set to notify that it is
capable, default to false. The nvme driver is the first one to enable it
in this patch. Everyone else will force DMA alignment to the logical
block size as before to ensure interval data is always aligned within a
single segment.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://patch.msgid.link/20260313144701.1221652-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
DEFINE_GUARD_COND() for device_lock_interruptible()
Introduce conditional guard version of device_lock() for scenarios that
require conditional device lock holding.
This is a stable tag for other trees to merge.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The member is 'data', not 'opaque'.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since UDP and UDP-Lite had dedicated socket hash tables for
each, we have had to pass the pointer down to many socket
lookup functions.
UDP-Lite gone, and we do not need to do that.
Let's fetch net->ipv4.udp_table only where needed in IPv4
stack: __udp4_lib_lookup(), __udp4_lib_mcast_deliver(),
and udp_diag_dump().
Some functions are renamed as the wrapper functions are no
longer needed.
__udp4_lib_err() -> udp_err()
__udp_diag_destroy() -> udp_diag_destroy()
udp_dump_one() -> udp_diag_dump_one()
udp_dump() -> udp_diag_dump()
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-15-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since UDP and UDP-Lite had dedicated socket hash tables for
each, we have had to pass the pointer down to many socket
lookup functions.
UDP-Lite gone, and we do not need to do that.
Let's fetch net->ipv4.udp_table only where needed in IPv6
stack: __udp6_lib_lookup() and __udp6_lib_mcast_deliver().
__udp6_lib_err() is renamed to udpv6_err() as its wrapper
is no longer needed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-14-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since UDP and UDP-Lite had dedicated socket hash tables for
each, we have had to fetch them from different pointers for
procfs or bpf iterator.
UDP always has its global or per-netns table in
net->ipv4.udp_table and struct udp_seq_afinfo.udp_table
is NULL.
OTOH, UDP-Lite had only one global table in the pointer.
We no longer use the field.
Let's remove it and udp_get_table_seq().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-12-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since UDP and UDP-Lite had dedicated socket hash tables for
each, we have had to fetch them from different pointers.
UDP always has its global or per-netns table in
net->ipv4.udp_table and struct proto.h.udp_table is NULL.
OTOH, UDP-Lite had only one global table in the pointer.
We no longer use the field.
Let's remove it and udp_get_table_prot().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UDP-Lite supports variable-length checksum and has two socket
options, UDPLITE_SEND_CSCOV and UDPLITE_RECV_CSCOV, to control
the checksum coverage.
Let's remove the support.
setsockopt(UDPLITE_SEND_CSCOV / UDPLITE_RECV_CSCOV) was only
available for UDP-Lite and returned -ENOPROTOOPT for UDP.
Now, the options are handled in ip_setsockopt() and
ipv6_setsockopt(), which still return the same error.
getsockopt(UDPLITE_SEND_CSCOV / UDPLITE_RECV_CSCOV) was available
for UDP and always returned 0, meaning full checksum, but now
-ENOPROTOOPT is returned.
Given that getsockopt() is meaningless for UDP and even the options
are not defined under include/uapi/, this should not be a problem.
$ man 7 udplite
...
BUGS
Where glibc support is missing, the following definitions
are needed:
#define IPPROTO_UDPLITE 136
#define UDPLITE_SEND_CSCOV 10
#define UDPLITE_RECV_CSCOV 11
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UDP TX paths also have some code for UDP-Lite partial
checksum:
* udplite_csum() in udp_send_skb() and udp_v6_send_skb()
* udplite_getfrag() in udp_sendmsg() and udpv6_sendmsg()
Let's remove such code.
Now, we can use IPPROTO_UDP directly instead of sk->sk_protocol
or fl6->flowi6_proto for csum_tcpudp_magic() and csum_ipv6_magic().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UDP-Lite supports the partial checksum and the coverage is
stored in the position of the length field of struct udphdr.
In RX paths, udp4_csum_init() / udp6_csum_init() save the value
in UDP_SKB_CB(skb)->cscov and set UDP_SKB_CB(skb)->partial_cov
to 1 if the coverage is not full.
The subsequent processing diverges depending on the value,
but such paths are now dead.
Also, these functions have some code guarded for UDP:
* udp_unicast_rcv_skb / udp6_unicast_rcv_skb
* __udp4_lib_rcv() and __udp6_lib_rcv().
Let's remove the partial csum code and the unnecessary
guard for UDP-Lite in RX.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since UDP and UDP-Lite shared most of the code, we have had
to check the protocol every time we increment SNMP stats.
Now that the UDP-Lite paths are dead, let's remove UDP-Lite
SNMP stats.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have deprecated IPv6 UDP-Lite sockets.
Let's drop support for IPv4 UDP-Lite sockets as well.
Most of the changes are similar to the IPv6 patch: removing
udplite.c and udp_impl.h, marking most functions in udp_impl.h
as static, moving the prototype for udp_recvmsg() to udp.h, and
adding INDIRECT_CALLABLE_SCOPE for it.
In addition, the INET_DIAG support for UDP-Lite is dropped.
We will remove the remaining dead code in the following patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As announced in commit be28c14ac8bb ("udplite: Print deprecation
notice."), it's time to deprecate UDP-Lite.
As a first step, let's drop support for IPv6 UDP-Lite sockets.
We will remove the remaining dead code gradually.
Along with the removal of udplite.c, most of the functions exposed
via udp_impl.h are made static.
The prototypes of udpv6_sendmsg() and udpv6_recvmsg() are moved
to udp.h, but only udpv6_recvmsg() has INDIRECT_CALLABLE_DECLARE()
because udpv6_sendmsg() is exported for rxrpc since commit ed472b0c8783
("rxrpc: Call udp_sendmsg() directly").
Also, udpv6_recvmsg() needs INDIRECT_CALLABLE_SCOPE for
CONFIG_MITIGATION_RETPOLINE=n.
Note that udplite.h is included temporarily for udplite_csum().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit a3d2599b2446 ("ipv{4,6}/udp{,lite}: simplify proc
registration"), udp4_seq_show() and udp6_seq_show() are not
used in net/ipv4/udplite.c and net/ipv6/udplite.c.
Instead, udp_seq_ops and udp6_seq_ops are exposed to UDP-Lite.
Let's make udp4_seq_show() and udp6_seq_show() static.
udp_seq_ops and udp6_seq_ops are moved to udp_impl.h so that
we can make them static when the header is removed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This new helper helps ensure all accesses to zone_device_data use the
correct API whether the page is part of a folio or not.
v2:
- Move to drm_pagemap.h, stick to folio_zone_device_data (Matthew Brost)
- Return struct drm_pagemap_zdd * (Matthew Brost)
v3:
- Add stub for !CONFIG_ZONE_DEVICE (CI)
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: linux-mm@kvack.org
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260312192126.2024853-3-francois.dugast@intel.com
|
|
Currently, arch_sync_dma_for_cpu and arch_sync_dma_for_device
always wait for the completion of each DMA buffer. That is,
issuing the DMA sync and waiting for completion is done in a
single API call.
For scatter-gather lists with multiple entries, this means
issuing and waiting is repeated for each entry, which can hurt
performance. Architectures like ARM64 may be able to issue all
DMA sync operations for all entries first and then wait for
completion together.
To address this, arch_sync_dma_for_* now batches DMA operations
and performs a flush afterward. On ARM64, the flush is implemented
with a dsb instruction in arch_sync_dma_flush(). On other
architectures, arch_sync_dma_flush() is currently a nop.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Reviewed-by: Juergen Gross <jgross@suse.com> # drivers/xen/swiotlb-xen.c
Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
Signed-off-by: Barry Song <baohua@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260228221316.59934-1-21cnbao@gmail.com
|
|
Currently, there are two helpers to match the root compatible value
against an of_device_id array:
- of_machine_device_match() returns true if a match is found,
- of_machine_get_match_data() returns the match data if a match is
found.
However, there is no helper that returns the actual of_device_id
structure corresponding to the match, leading to code duplication in
various drivers.
Fix this by reworking of_machine_device_match() to return the actual
match structure, and renaming it to of_machine_get_match().
Retain the old of_machine_device_match() functionality using a cheap
static inline wrapper around the new of_machine_get_match() helper.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/14e1c03d443b1a5f210609ec3a1ebbaeab8fb3d9.1772468323.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add SCX_ENQ_IMMED enqueue flag for local DSQ insertions. Once a task is
dispatched with IMMED, it either gets on the CPU immediately and stays on it,
or gets reenqueued back to the BPF scheduler. It will never linger on a local
DSQ behind other tasks or on a CPU taken by a higher-priority class.
rq_is_open() uses rq->next_class to determine whether the rq is available,
and wakeup_preempt_scx() triggers reenqueue when a higher-priority class task
arrives. These capture all higher class preemptions. Combined with reenqueue
points in the dispatch path, all cases where an IMMED task would not execute
immediately are covered.
SCX_TASK_IMMED persists in p->scx.flags until the next fresh enqueue, so the
guarantee survives SAVE/RESTORE cycles. If preempted while running,
put_prev_task_scx() reenqueues through ops.enqueue() with
SCX_TASK_REENQ_PREEMPTED instead of silently placing the task back on the
local DSQ.
This enables tighter scheduling latency control by preventing tasks from
piling up on local DSQs. It also enables opportunistic CPU sharing across
sub-schedulers - without this, a sub-scheduler can stuff the local DSQ of a
shared CPU, making it difficult for others to use.
v2: - Rewrite is_curr_done() as rq_is_open() using rq->next_class and
implement wakeup_preempt_scx() to achieve complete coverage of all
cases where IMMED tasks could get stranded.
- Track IMMED persistently in p->scx.flags and reenqueue
preempted-while-running tasks through ops.enqueue().
- Bound deferred reenq cycles (SCX_REENQ_LOCAL_MAX_REPEAT).
- Misc renames, documentation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix nvme-pci IRQ race and slab-out-of-bounds access
- Fix recursive workqueue locking for target async events
- Various cleanups
- Fix a potential NULL pointer dereference in ublk on size setting
- ublk automatic partition scanning fix
- Two s390 dasd fixes
* tag 'block-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
nvme: Annotate struct nvme_dhchap_key with __counted_by
nvme-core: do not pass empty queue_limits to blk_mq_alloc_queue()
nvme-pci: Fix race bug in nvme_poll_irqdisable()
nvmet: move async event work off nvmet-wq
nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set
s390/dasd: Copy detected format information to secondary device
s390/dasd: Move quiesce state with pprc swap
ublk: don't clear GD_SUPPRESS_PART_SCAN for unprivileged daemons
ublk: fix NULL pointer dereference in ublk_ctrl_set_size()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix an inverted true/false comment on task_no_new_privs, from the
BPF filtering changes merged in this release
- Use the migration disabling way of running the BPF filters, as the
io_uring side doesn't do that already
- Fix an issue with ->rings stability under resize, both for local
task_work additions and for eventfd signaling
- Fix an issue with SQE mixed mode, where a bounds check wasn't correct
for having a 128b SQE
- Fix an issue where a legacy provided buffer group is changed to to
ring mapped one while legacy buffers from that group are in flight
* tag 'io_uring-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/kbuf: check if target buffer list is still legacy on recycle
io_uring: fix physical SQE bounds check for SQE_MIXED 128-byte ops
io_uring/eventfd: use ctx->rings_rcu for flags checking
io_uring: ensure ctx->rings is stable for task work flags manipulation
io_uring/bpf_filter: use bpf_prog_run_pin_on_cpu() to prevent migration
io_uring/register: fix comment about task_no_new_privs
|
|
The ACPI_AC_CLASS symbol is defined in several places in the same way
which is rather unfortunate.
Instead, define it in one common header file (acpi_bus.h) so that it is
accessible to all of its users.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/6163384.MhkbZ0Pkbq@rafael.j.wysocki
|
|
Several core ACPI device drivers set acpi_device_class() for the given
struct acpi_device to whatever they like, but that value is never used
unless the driver itself uses it and, sadly, they neglect to clear it on
remove. Since the only one of them still using acpi_device_class()
after previous changes is the button driver, update the others to stop
setting it in vain. Also drop the related device class sybmols that
become redundant.
Since the ACPI button driver continues to use acpi_device_class(), make
it clear the struct field represented by acpi_device_class() in its
remove callback.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3706295.iIbC2pHGDl@rafael.j.wysocki
|
|
Notice that acpi_notifier_call_chain() only uses its device argument
to retrieve the pnp.device_class and pnp.bus_id values from there, so
it can be redefined to take pointers to those two strings as parameters
istead of a struct acpi_device pointer.
That allows all of its callers to pass a string literal as its first
argument, so they won't need to initialize pnp.device_class in
struct acpi_device objects operated by them any more, and its
signature becomes more similar to acpi_bus_generate_netlink_event()
then.
Update the code as per the above.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2056097.PYKUYFuaPT@rafael.j.wysocki
|
|
ACPI drivers usually set acpi_device_name() for the given struct
acpi_device to whatever they like, but that value is never used unless
the driver itself uses it and, quite unfortunately, drivers neglect to
clear it on remove. Some drivers use it for printing messages or
initializing the names of subordinate devices, but it is better to use
string literals for that, especially if the given one is used just once.
To eliminate unnecessary overhead related to acpi_device_name()
handling, rework multiple core ACPI device drivers to stop setting
acpi_device_name() for struct acpi_device objects manipulated
by them and use a string literal instead of it where applicable.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10840483.nUPlyArG6x@rafael.j.wysocki
|
|
Introduce dev_is_auxiliary() in analogy with dev_is_platform() to
facilitate subsequent changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/5079467.GXAFRqVoOG@rafael.j.wysocki
|
|
security/integrity/secure_boot.c contains a single __weak function,
which breaks recordmcount when building with clang:
$ make -skj"$(nproc)" ARCH=powerpc LLVM=1 ppc64_defconfig security/integrity/secure_boot.o
Cannot find symbol for section 2: .text.
security/integrity/secure_boot.o: failed
Introduce a Kconfig symbol, CONFIG_HAVE_ARCH_GET_SECUREBOOT, to indicate
that an architecture provides a definition of arch_get_secureboot().
Provide a static inline stub when this symbol is not defined to achieve
the same effect as the __weak function, allowing secure_boot.c to be
removed altogether. Move the s390 definition of arch_get_secureboot()
out of the CONFIG_KEXEC_FILE block to ensure it is always available, as
it does not actually depend on KEXEC_FILE.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 31a6a07eefeb ("integrity: Make arch_ima_get_secureboot integrity-wide")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
If cloning the second stateful expression in the element via GFP_ATOMIC
fails, then the first stateful expression remains in place without being
released.
unreferenced object (percpu) 0x607b97e9cab8 (size 16):
comm "softirq", pid 0, jiffies 4294931867
hex dump (first 16 bytes on cpu 3):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
backtrace (crc 0):
pcpu_alloc_noprof+0x453/0xd80
nft_counter_clone+0x9c/0x190 [nf_tables]
nft_expr_clone+0x8f/0x1b0 [nf_tables]
nft_dynset_new+0x2cb/0x5f0 [nf_tables]
nft_rhash_update+0x236/0x11c0 [nf_tables]
nft_dynset_eval+0x11f/0x670 [nf_tables]
nft_do_chain+0x253/0x1700 [nf_tables]
nft_do_chain_ipv4+0x18d/0x270 [nf_tables]
nf_hook_slow+0xaa/0x1e0
ip_local_deliver+0x209/0x330
Fixes: 563125a73ac3 ("netfilter: nftables: generalize set extension to support for several expressions")
Reported-by: Gurpreet Shergill <giki.shergill@proton.me>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This reverts commit 648946966a08 ("netfilter: nft_set_rbtree: validate
open interval overlap").
There have been reports of nft failing to laod valid rulesets after this
patch was merged into -stable.
I can reproduce several such problem with recent nft versions, including
nft 1.1.6 which is widely shipped by distributions.
We currently have little choice here.
This commit can be resurrected at some point once the nftables fix that
triggers the false overlap positive has appeared in common distros
(see e83e32c8d1cd ("mnl: restore create element command with large batches" in
nftables.git).
Fixes: 648946966a08 ("netfilter: nft_set_rbtree: validate open interval overlap")
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
According to the definition in IEEE Std 802.11be-2024, Table 9-417r, each
bit indicates support for the transmission and reception of EHT-MCS 15 in:
- B0: 52+26-tone and 106+26-tone MRUs.
- B1: a 484+242-tone MRU if 80 MHz is supported.
- B2: a 996+484-tone MRU and a 996+484+242-tone MRU if 160 MHz is
supported.
- B3: a 3×996-tone MRU if 320 MHz is supported.
Fixes: 6239da18d2f9 ("wifi: mac80211: adjust EHT capa when lowering bandwidth")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20260313062150.3165433-1-shayne.chen@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Constify the groups arrays, allowing to assign constant arrays.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/7ff56b07-09ca-4948-b98f-5bd37ceef21e@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
device_remove_groups
Now that sysfs_create_groups() and sysfs_remove_groups() allow to
pass constant groups arrays, we can constify the groups array argument
also here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/8ea2d6d1-0adb-4d7f-92bc-751e93ce08d6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Constify the groups array argument where applicable. This allows to
pass constant arrays as arguments.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/17035265-8882-4101-b7a7-16b3eb94f8b5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The alternate screen support added by commit 23743ba64709 ("vt: add
support for smput/rmput escape codes") only saves and restores the
regular screen buffer (vc_origin), but completely ignores the corresponding
unicode screen buffer (vc_uni_lines) creating a messed-up display.
Add vc_saved_uni_lines to save the unicode screen buffer when entering
the alternate screen, and restore it when leaving. Also ensure proper
cleanup in reset_terminal() and vc_deallocate().
Fixes: 23743ba64709 ("vt: add support for smput/rmput escape codes")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://patch.msgid.link/5o2p6qp3-91pq-0p17-or02-1oors4417ns7@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the correct struct member name and function parameter name in
kernel-doc comments.
Move a macro that was between a struct's documentation and its
declaration.
These eliminate the following kernel-doc warnings:
Warning: include/linux/tee_core.h:73 struct member 'c_no_users' not
described in 'tee_device'
Warning: include/linux/tee_core.h:132 #define TEE_DESC_PRIVILEGED
0x1; error: Cannot parse struct or union!
Warning: include/linux/tee_core.h:257 function parameter 'connection_data'
not described in 'tee_session_calc_client_uuid'
Warning: include/linux/tee_core.h:320 function parameter 'teedev'
not described in 'tee_get_drvdata'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
There is kernel-doc warning for DRM_XE_VM_BIND_FLAG_DECOMPRESS:
./include/uapi/drm/xe_drm.h:1060: WARNING: Block quote ends without
a blank line; unexpected unindent.
Fix the warning by adding the missing '%' prefix to
DRM_XE_VM_BIND_FLAG_DECOMPRESS in the kernel-doc list entry for
struct drm_xe_vm_bind_op.
Fixes: 2270bd7124f4 ("drm/xe: add VM_BIND DECOMPRESS uapi flag")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603121515.gEMrFlTL-lkp@intel.com/
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260312160244.809849-2-nitin.r.gote@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
|
|
The beacon doesn't contain the full UHR operation, a number
of fields (such as NPCA) are only partially there. Add a new
attribute to contain the full information, so it's available
to the driver/mac80211.
Link: https://patch.msgid.link/20260303221710.866bacf82639.Iafdf37fb0f4304bdcdb824977d61e17b38c47685@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which
call iptunnel_xmit_stats().
iptunnel_xmit_stats() was assuming tunnels were only using
NETDEV_PCPU_STAT_TSTATS.
@syncp offset in pcpu_sw_netstats and pcpu_dstats is different.
32bit kernels would either have corruptions or freezes if the syncp
sequence was overwritten.
This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid
a potential cache line miss since iptunnel_xmit_stats() needs to read it.
Fixes: 6fa6de302246 ("geneve: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: be226352e8dc ("vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20260311123110.1471930-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current page_pool alloc-cache size and refill values were chosen to
match the NAPI budget and to leave headroom for XDP_DROP recycling.
These fixed values do not scale well with large pages,
as they significantly increase a given page_pool's memory footprint.
Scale these values to better balance memory footprint across page sizes,
while keeping behavior on 4KB-page systems unchanged.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260309081301.103152-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce conditional guard version of device_lock() for scenarios that
require conditional device lock holding.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Link: https://patch.msgid.link/20260310-fix_access_endpoint_without_drv_check-v1-1-94fe919a0b87@zohomail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc4).
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
db25c42c2e1f9 ("net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ")
dff1c3164a692 ("net/mlx5e: SHAMPO, Always calculate page size")
https://lore.kernel.org/aa7ORohmf67EKihj@sirena.org.uk
drivers/net/ethernet/ti/am65-cpsw-nuss.c
840c9d13cb1ca ("net: ethernet: ti: am65-cpsw-nuss: Fix rx_filter value for PTP support")
a23c657e332f2 ("net: ethernet: ti: am65-cpsw: Use also port number to identify timestamps")
https://lore.kernel.org/abK3EkIXuVgMyGI7@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and netfilter.
Current release - regressions:
- eth: mana: Null service_wq on setup error to prevent double destroy
Previous releases - regressions:
- nexthop: fix percpu use-after-free in remove_nh_grp_entry
- sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit
- bpf: fix nd_tbl NULL dereference when IPv6 is disabled
- neighbour: restore protocol != 0 check in pneigh update
- tipc: fix divide-by-zero in tipc_sk_filter_connect()
- eth:
- mlx5:
- fix crash when moving to switchdev mode
- fix DMA FIFO desync on error CQE SQ recovery
- iavf: fix PTP use-after-free during reset
- bonding: fix type confusion in bond_setup_by_slave()
- lan78xx: fix WARN in __netif_napi_del_locked on disconnect
Previous releases - always broken:
- core: add xmit recursion limit to tunnel xmit functions
- net-shapers: don't free reply skb after genlmsg_reply()
- netfilter:
- fix stack out-of-bounds read in pipapo_drop()
- fix OOB read in nfnl_cthelper_dump_table()
- mctp:
- fix device leak on probe failure
- i2c: fix skb memory leak in receive path
- can: keep the max bitrate error at 5%
- eth:
- bonding: fix nd_tbl NULL dereference when IPv6 is disabled
- bnxt_en: fix RSS table size check when changing ethtool channels
- amd-xgbe: prevent CRC errors during RX adaptation with AN disabled
- octeontx2-af: devlink: fix NIX RAS reporter recovery condition"
* tag 'net-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
net: prevent NULL deref in ip[6]tunnel_xmit()
octeontx2-af: devlink: fix NIX RAS reporter to use RAS interrupt status
octeontx2-af: devlink: fix NIX RAS reporter recovery condition
net: ethernet: ti: am65-cpsw-nuss: Fix rx_filter value for PTP support
net/mana: Null service_wq on setup error to prevent double destroy
selftests: rtnetlink: add neighbour update test
neighbour: restore protocol != 0 check in pneigh update
net: dsa: realtek: Fix LED group port bit for non-zero LED group
tipc: fix divide-by-zero in tipc_sk_filter_connect()
net: dsa: microchip: Fix error path in PTP IRQ setup
bpf: bpf_out_neigh_v6: Fix nd_tbl NULL dereference when IPv6 is disabled
bpf: bpf_out_neigh_v4: Fix nd_tbl NULL dereference when IPv6 is disabled
net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled
ipv6: move the disable_ipv6_mod knob to core code
net: bcmgenet: fix broken EEE by converting to phylib-managed state
net-shapers: don't free reply skb after genlmsg_reply()
net: dsa: mxl862xx: don't set user_mii_bus
net: ethernet: arc: emac: quiesce interrupts before requesting IRQ
page_pool: store detach_time as ktime_t to avoid false-negatives
net: macb: Shuffle the tx ring before enabling tx
...
|
|
Commit 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays with
flexible-array members") broke the userspace API for C++.
These structures ending in VLAs are typically a *header*, which can be
followed by an arbitrary number of entries. Userspace typically creates
a larger structure with some non-zero number of entries, for example in
QEMU's kvm_arch_get_supported_msr_feature():
struct {
struct kvm_msrs info;
struct kvm_msr_entry entries[1];
} msr_data = {};
While that works in C, it fails in C++ with an error like:
flexible array member 'kvm_msrs::entries' not at end of 'struct msr_data'
Fix this by using __DECLARE_FLEX_ARRAY() for the VLA, which uses [0]
for C++ compilation.
Fixes: 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays with flexible-array members")
Cc: stable@vger.kernel.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://patch.msgid.link/3abaf6aefd6e5efeff3b860ac38421d9dec908db.camel@infradead.org
[sean: tag for stable@]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.
|
|
Some SoC drivers reimplement the functionality of
soc_device_get_machine(). Make this function accessible through the
sys_soc.h header and rename it to a more descriptive name.
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260223-soc-of-root-v2-4-b45da45903c8@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Provide a helper function allowing users to read the model string of the
machine, hiding the access to the root node.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260223-soc-of-root-v2-2-b45da45903c8@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
