| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add the SDHI high-speed clock (SDHI_CLKHS) definition for the Renesas
RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs. SDHI_CLKHS is used as
a core clock for the SDHI IP and operates at 800MHz.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250625141705.151383-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add XSPI core clock definitions to the clock bindings for the Renesas
R9A09G056 and R9A09G057 SoCs. These clocks IDs are used to support XSPI
interface.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250627204237.214635-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
PR_MTE_STORE_ONLY is used to restrict the MTE tag check for store
opeartion only.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250618092957.2069907-3-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There are no users outside the module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630092639.1574860-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add defines for the values of the ECC_MODE field of the NAND_DEV0_ECC_CFG
register and change both the 'qcom-nandc' and 'spi-qpic-snand' drivers to
use those instead of magic numbers.
No functional changes. This is in preparation for adding 8 bit ECC strength
support for the 'spi-qpic-snand' driver.
Reviewed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20250702-qpic-snand-8bit-ecc-v2-1-ae2c17a30bb7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce file_getattr() and file_setattr() syscalls to manipulate inode
extended attributes. The syscalls takes pair of file descriptor and
pathname. Then it operates on inode opened accroding to openat()
semantics. The struct file_attr is passed to obtain/change extended
attributes.
This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference
that file don't need to be open as we can reference it with a path
instead of fd. By having this we can manipulated inode extended
attributes not only on regular files but also on special ones. This
is not possible with FS_IOC_FSSETXATTR ioctl as with special files
we can not call ioctl() directly on the filesystem inode using fd.
This patch adds two new syscalls which allows userspace to get/set
extended inode attributes on special files by using parent directory
and a path - *at() like syscall.
CC: linux-api@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: linux-xfs@vger.kernel.org
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a flag that enables polling on the mock file. For now it's trivially
says that there is always data available, it'll be extended in the
future.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f16de043ec4876d65fae294fc99ade57415fba0c.1750599274.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Let the user to specify a delay to read/write request. io_uring will
start a timer, return -EIOCBQUEUED and complete the request
asynchronously after the delay pass.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/38f9d2e143fda8522c90a724b74630e68f9bbd16.1750599274.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add an option to choose whether the file supports FMODE_NOWAIT, that
changes the execution path io_uring request takes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1e532565b05a05b23589d237c24ee1a3d90c2fd9.1750599274.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for synchronous zero read/write for mock files.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/571f3c9fe688e918256a06a722d3db6ced9ca3d5.1750599274.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a command api allowing to import vectored registered buffers,
add a new mock command that uses the feature and simply copies the
specified registered buffer into user space or vice versa.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/229a113fd7de6b27dbef9567f7c0bf4475c9017d.1750599274.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring commands provide an ioctl style interface for files to
implement file specific operations. io_uring provides many features and
advanced api to commands, and it's getting hard to test as it requires
specific files/devices.
Add basic infrastucture for creating special mock files that will be
implementing the cmd api and using various io_uring features we want to
test. It'll also be useful to test some more obscure read/write/polling
edge cases in the future.
Suggested-by: chase xd <sl1589472800@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/93f21b0af58c1367a2b22635d5a7d694ad0272fc.1750599274.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We intend to add support for more xflags to selective filesystems and
We cannot rely on copy_struct_from_user() to detect this extension.
In preparation of extending the API, do not allow setting xflags unknown
by this kernel version.
Also do not pass the read-only flags and read-only field fsx_nextents to
filesystem.
These changes should not affect existing chattr programs that use the
ioctl to get fsxattr before setting the new values.
Link: https://lore.kernel.org/linux-fsdevel/20250216164029.20673-4-pali@kernel.org/
Cc: Pali Rohár <pali@kernel.org>
Cc: Andrey Albershteyn <aalbersh@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-5-c4e3bc35227b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Note that kernel.h is discouraged to be included as it's written
at the top of that file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Documentation for luminance_set for struct drm_edp_backlight_info
was missed which causes warnings.
Fixes: 2af612ad4290 ("drm/dp: Introduce new member in drm_backlight_info")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@gmail.com>
Link: https://lore.kernel.org/r/20250701085054.746408-1-suraj.kandpal@intel.com
|
|
Upon receiving the Reset Request, pause the connection and clean up
queues, wait for the specified period, then resume the NIC.
In the cleanup phase, the HWC is no longer responding, so set hwc_timeout
to zero to skip waiting on the response.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1751055983-29760-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently fprobe events are registered when it is defined. Thus it will
give some overhead even if it is disabled. This changes it to register the
fprobe only when it is enabled.
Link: https://lore.kernel.org/all/174343537128.843280.16131300052837035043.stgit@devnote2/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Allow user to set multiple tracepoint-probe events on the same
tracepoint. After the last tprobe-event is removed, the tracepoint
callback is unregistered.
Link: https://lore.kernel.org/all/174343536245.843280.6548776576601537671.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Merge series from David Lechner <dlechner@baylibre.com>:
Also there is a new dt-binding and driver for a special SPI offload
trigger FPGA IP core that is used in this particular setup.
|
|
A small race exists between spsc_queue_push and the run-job worker, in
which spsc_queue_push may return not-first while the run-job worker has
already idled due to the job count being zero. If this race occurs, job
scheduling stops, leading to hangs while waiting on the job’s DMA
fences.
Seal this race by incrementing the job count before appending to the
SPSC queue.
This race was observed on a drm-tip 6.16-rc1 build with the Xe driver in
an SVM test case.
Fixes: 1b1f42d8fde4 ("drm: move amd_gpu_scheduler into common location")
Fixes: 27105db6c63a ("drm/amdgpu: Add SPSC queue to scheduler.")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250613212013.719312-1-matthew.brost@intel.com
|
|
Add support for adding GPIs to the event FIFO. This is done by adding
irq_chip support. Like this, one can use the input gpio_keys driver as a
"frontend" device and input handler.
As part of this change, we now implement .request() and .free() as we can't
blindly consume all available pins as GPIOs (example: some pins can be
used for forming a keymap matrix).
Also note that the number of pins can now be obtained from the parent,
top level device. Hence the 'max_gpio' variable can be removed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-15-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The ADP558x family supports a built in keypad matrix decoder which can
be added as an Input device. In order to both support the Input and the
GPIO device, we need to create a bitmap of the supported pins and track
their usage since they can either be used as GPIOs (GPIs) or as part of
the keymap.
We also need to mark special pins busy in case some features are being
used (ex: pwm or reset events).
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-14-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The ADP558x family of devices can be programmed to respond to some
especial events, In case of the unlock events, one can lock the keypad
and use KEYS or GPIs events to unlock it. For the reset events, one can
again use a combinations of GPIs/KEYs in order to generate an event that
will trigger the device to generate an output reset pulse.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-13-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
These devices are capable of generate FIFO based events based on KEY or
GPI presses. Add support for handling these events. This is in
preparation of adding full support for keymap and gpis based events.
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-12-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add support for the adp5589 I/O expander. From a PWM point of view it is
pretty similar to adp5585. Main difference is the address
of registers meaningful for configuring the PWM.
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-10-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Support the adp5589 I/O expander which supports up to 19 pins. We need
to add a chip_info based struct since accessing register "banks"
and "bits" differs between devices.
Also some register addresses are different.
While at it move ADP558X_GPIO_MAX defines to the main header file and
rename them. That information will be needed by the top level device in
a following change.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-9-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There are some differences in the register map between the devices.
Hence, add a register structure per device. This will be needed in
following patches.
On top of that adp5585_fill_regmap_config() is renamed and reworked so
that the current struct adp5585_info act as template (they indeed
contain all the different data between variants) which can then be
complemented depending on the device (as identified by the id register).
This is done like this since a lot of the data is pretty much the same
between variants of the same device.
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-8-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The ADP5589 is a 19 I/O port expander with built-in keypad matrix decoder,
programmable logic, reset generator, and PWM generator.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-7-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The only thing changing between variants is the regmap default
registers. Hence, instead of having a regmap configuration for every
variant (duplicating lots of fields), add a chip info type of structure
with a regmap ID to identify which defaults to use and populate
regmap_config at runtime given a template plus the id. Also note that
between variants, the defaults can be the same which means the chip info
structure can be used in more than one compatible.
This will also make it simpler adding new chips with more variants.
Also note that the chip info structures are deliberately not const as
they will also contain lots of members that are the same between the
different devices variants and so we will fill those at runtime.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-6-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Introduce new hooks for setting and getting filesystem extended
attributes on inode (FS_IOC_FSGETXATTR).
Cc: selinux@vger.kernel.org
Cc: Paul Moore <paul@paul-moore.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-2-c4e3bc35227b@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This patch moves function related to file extended attributes
manipulations to separate file. Refactoring only.
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-1-c4e3bc35227b@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make a number of updates to the netfs tracepoints:
(1) Remove a duplicate trace from netfs_unbuffered_write_iter_locked().
(2) Move the trace in netfs_wake_rreq_flag() to after the flag is cleared
so that the change appears in the trace.
(3) Differentiate the use of netfs_rreq_trace_wait/woke_queue symbols.
(4) Don't do so many trace emissions in the wait functions as some of them
are redundant.
(5) In netfs_collect_read_results(), differentiate a subreq that's being
abandoned vs one that has been consumed in a regular way.
(6) Add a tracepoint to indicate the call to ->ki_complete().
(7) Don't double-increment the subreq_counter when retrying a write.
(8) Move the netfs_sreq_trace_io_progress tracepoint within cifs code to
just MID_RESPONSE_RECEIVED and add different tracepoints for other MID
states and note check failure.
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Link: https://lore.kernel.org/20250701163852.2171681-14-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Renumber the NETFS_RREQ_* flags to put the most useful status bits in the
bottom nibble - and therefore the last hex digit in the trace output -
making it easier to grasp the state at a glance.
In particular, put the IN_PROGRESS flag in bit 0 and ALL_QUEUED at bit 1.
Also make the flags field in /proc/fs/netfs/requests larger to accommodate
all the flags.
Also make the flags field in the netfs_sreq tracepoint larger to
accommodate all the NETFS_SREQ_* flags.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-13-dhowells@redhat.com
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Netfslib has two functions for updating the i_size after a write: one for
buffered writes into the pagecache and one for direct/unbuffered writes.
However, what needs to be done is much the same in both cases, so merge
them together.
This does raise one question, though: should updating the i_size after a
direct write do the same estimated update of i_blocks as is done for
buffered writes.
Also get rid of the cleanup function pointer from netfs_io_request as it's
only used for direct write to update i_size; instead do the i_size setting
directly from write collection.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-12-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If a netfs request finishes during the pause loop, it will have the ref
that belongs to the IN_PROGRESS flag removed at that point - however, if it
then goes to the final wait loop, that will *also* put the ref because it
sees that the IN_PROGRESS flag is clear and incorrectly assumes that this
happened when it called the collector.
In fact, since IN_PROGRESS is clear, we shouldn't call the collector again
since it's done all the cleanup, such as calling ->ki_complete().
Fix this by making netfs_collect_in_app() just return, indicating that
we're done if IN_PROGRESS is removed.
Fixes: 2b1424cd131c ("netfs: Fix wait/wake to be consistent about the waitqueue used")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-3-dhowells@redhat.com
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Document the dma_pool_zalloc() wrapper.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
[jc: fixed up dma_pool_alloc() reference in dmapool.h]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627101015.1600042-5-ptesarik@suse.com
|
|
Add two variants of helper functions that calculate the correct number
of queues to use. Two variants are needed because some drivers base
their maximum number of queues on the possible CPU mask, while others
use the online CPU mask.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20250617-isolcpus-queue-counters-v1-2-13923686b54b@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
group_cpu_evenly() might have allocated less groups then requested:
group_cpu_evenly()
__group_cpus_evenly()
alloc_nodes_groups()
# allocated total groups may be less than numgrps when
# active total CPU number is less then numgrps
In this case, the caller will do an out of bound access because the
caller assumes the masks returned has numgrps.
Return the number of groups created so the caller can limit the access
range accordingly.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250617-isolcpus-queue-counters-v1-1-13923686b54b@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Note that kernel.h is discouraged to be included as it's written
at the top of that file.
While doing that, sort headers alphabetically.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250627142001.994860-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
If CONFIG_ACPI_SPCR_TABLE is disabled, acpi_parse_spcr()
currently returns 0, which may incorrectly suggest that
SPCR parsing was successful. This patch changes the behavior
to return -ENODEV to clearly indicate that SPCR support
is not available.
This prepares the codebase for future changes that depend
on acpi_parse_spcr() failure detection, such as suppressing
misleading console messages.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20250620131309.126555-2-me@linux.beauty
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In both the read callback for struct cyclecounter, and in struct
timecounter, struct cyclecounter is declared as a const pointer.
Unfortunatly, a number of users of this pointer treat it as a non-const
pointer as it is burried in a larger structure that is heavily modified by
the callback function when accessed. This lie had been hidden by the fact
that container_of() "casts away" a const attribute of a pointer without any
compiler warning happening at all.
Fix this all up by removing the const attribute in the needed places so
that everyone can see that the structure really isn't const, but can,
and is, modified by the users of it.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Add a maintainers entry for SDCA, do a couple of small fixups for
previous chains, and then adding the beginnings of the SDCA IRQ
handling. This is based around a regmap IRQ chip and a few helper
functions that can be called from the client drivers to setup the
IRQs.
|
|
Add a new ioctl, FS_IOC_GETLBMD_CAP, to query metadata and protection
info (PI) capabilities. This ioctl returns information about the files
integrity profile. This is useful for userspace applications to
understand a files end-to-end data protection support and configure the
I/O accordingly.
For now this interface is only supported by block devices. However the
design and placement of this ioctl in generic FS ioctl space allows us
to extend it to work over files as well. This maybe useful when
filesystems start supporting PI-aware layouts.
A new structure struct logical_block_metadata_cap is introduced, which
contains the following fields:
1. lbmd_flags: bitmask of logical block metadata capability flags
2. lbmd_interval: the amount of data described by each unit of logical
block metadata
3. lbmd_size: size in bytes of the logical block metadata associated
with each interval
4. lbmd_opaque_size: size in bytes of the opaque block tag associated
with each interval
5. lbmd_opaque_offset: offset in bytes of the opaque block tag within
the logical block metadata
6. lbmd_pi_size: size in bytes of the T10 PI tuple associated with each
interval
7. lbmd_pi_offset: offset in bytes of T10 PI tuple within the logical
block metadata
8. lbmd_pi_guard_tag_type: T10 PI guard tag type
9. lbmd_pi_app_tag_size: size in bytes of the T10 PI application tag
10. lbmd_pi_ref_tag_size: size in bytes of the T10 PI reference tag
11. lbmd_pi_storage_tag_size: size in bytes of the T10 PI storage tag
The internal logic to fetch the capability is encapsulated in a helper
function blk_get_meta_cap(), which uses the blk_integrity profile
associated with the device. The ioctl returns -EOPNOTSUPP, if
CONFIG_BLK_DEV_INTEGRITY is not enabled.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/20250630090548.3317-5-anuj20.g@samsung.com
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Introduce a new pi_tuple_size field in struct blk_integrity to
explicitly represent the size (in bytes) of the protection information
(PI) tuple. This is a prep patch.
Add validation in blk_validate_integrity_limits() to ensure that
pi size matches the expected size for known checksum types and never
exceeds the pi_tuple_size.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/20250630090548.3317-3-anuj20.g@samsung.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The tuple_size field in blk_integrity currently represents the total
size of metadata associated with each data interval. To make the meaning
more explicit, rename tuple_size to metadata_size. This is a purely
mechanical rename with no functional changes.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/20250630090548.3317-2-anuj20.g@samsung.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Implementing if-conditions inside for_each_x() macros requires some
thinking to avoid side effects in the calling code. Resulting code
may look somewhat awkward, and there are couple of different ways it is
usually done.
Standardizing this to one way can help making it more obvious for a code
reader and writer. The newly added for_each_if() is a way to achieve this.
Use for_each_if() to make these macros look like many others which
should in the long run help reading the code.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/c98b39a7195006fdd24590b8d11bb271a72a0c8a.1749453752.git.mazziesaccount@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Because pps_cdev_poll() returns unconditionally EPOLLIN,
a user space program that calls select/poll get always an immediate data
ready-to-read response. As a result the intended use to wait until next
data becomes ready does not work.
User space snippet:
struct pollfd pollfd = {
.fd = open("/dev/pps0", O_RDONLY),
.events = POLLIN|POLLERR,
.revents = 0 };
while(1) {
poll(&pollfd, 1, 2000/*ms*/); // returns immediate, but should wait
if(revents & EPOLLIN) { // always true
struct pps_fdata fdata;
memset(&fdata, 0, sizeof(memdata));
ioctl(PPS_FETCH, &fdata); // currently fetches data at max speed
}
}
Lets remember the last fetch event counter and compare this value
in pps_cdev_poll() with most recent event counter
and return 0 if they are equal.
Signed-off-by: Denis OSTERLAND-HEIM <denis.osterland@diehl.com>
Co-developed-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
Fixes: eae9d2ba0cfc ("LinuxPPS: core support")
Link: https://lore.kernel.org/all/f6bed779-6d59-4f0f-8a59-b6312bd83b4e@enneenne.com/
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/c3c50ad1eb19ef553eca8a57c17f4c006413ab70.camel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, the capability check is done in the default
init_user_ns user namespace. When a process runs in a
non default user namespace, such check fails. Due to this
when a process is running using Podman, it fails to create
the flow resource.
Since the RDMA device is a resource within a network namespace,
use the network namespace associated with the RDMA device to
determine its owning user namespace.
Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://patch.msgid.link/6df6f2f24627874c4f6d041c19dc1f6f29f68f84.1750963874.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Drop the unused MIPI_DSI_MODE_VSYNC_FLUSH flag. Whether or not a display
FIFO flush on vsync is required to avoid sending garbage to the panel is
not a property of the DSI link, but of the integration between display
controller and DSI host bridge.
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250627-dsi-vsync-flush-v2-4-4066899a5608@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Currently, UBLK_IO_REGISTER_IO_BUF and UBLK_IO_UNREGISTER_IO_BUF are
only permitted on the ublk_io's daemon task. But this restriction is
unnecessary. ublk_register_io_buf() calls __ublk_check_and_get_req() to
look up the request from the tagset and atomically take a reference on
the request without accessing the ublk_io. ublk_unregister_io_buf()
doesn't use the q_id or tag at all.
So allow these opcodes even on tasks other than io->task.
Handle UBLK_IO_UNREGISTER_IO_BUF before obtaining the ubq and io since
the buffer index being unregistered is not necessarily related to the
specified q_id and tag.
Add a feature flag UBLK_F_BUF_REG_OFF_DAEMON that userspace can use to
determine whether the kernel supports off-daemon buffer registration.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-10-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
