| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Cross-merge BPF and other fixes after downstream PR.
Minor conflicts in:
tools/testing/selftests/bpf/progs/exceptions_fail.c
tools/testing/selftests/bpf/progs/verifier_bounds.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add vhca_id_type bit to alias context which allows indicating the
vhca_id_type to be passed at vhca_id_to_be_accessed, which can be either
HW or SW, note that SW_VHCA_ID must be used to allow alias to work
properly after migration.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260319122211.27384-3-tariqt@nvidia.com
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
iseg_base and base_addr both point to BAR0, making iseg_base redundant.
Remove iseg_base and rely on base_addr instead, reducing the size of
struct mlx5_core_dev.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260319122211.27384-2-tariqt@nvidia.com
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Revert "tracing: Remove pid in task_rename tracing output"
A change was made to remove the pid field from the task_rename event
because it was thought that it was always done for the current task
and recording the pid would be redundant. This turned out to be
incorrect and there are a few corner case where this is not true and
caused some regressions in tooling.
- Fix the reading from user space for migration
The reading of user space uses a seq lock type of logic where it uses
a per-cpu temporary buffer and disables migration, then enables
preemption, does the copy from user space, disables preemption,
enables migration and checks if there was any schedule switches while
preemption was enabled. If there was a context switch, then it is
considered that the per-cpu buffer could be corrupted and it tries
again. There's a protection check that tests if it takes a hundred
tries, it issues a warning and exits out to prevent a live lock.
This was triggered because the task was selected by the load balancer
to be migrated to another CPU, every time preemption is enabled the
migration task would schedule in try to migrate the task but can't
because migration is disabled and let it run again. This caused the
scheduler to schedule out the task every time it enabled preemption
and made the loop never exit (until the 100 iteration test
triggered).
Fix this by enabling and disabling preemption and keeping migration
enabled if the reading from user space needs to be done again. This
will let the migration thread migrate the task and the copy from user
space will likely pass on the next iteration.
- Fix trace_marker copy option freeing
The "copy_trace_marker" option allows a tracing instance to get a
copy of a write to the trace_marker file of the top level instance.
This is managed by a link list protected by RCU. When an instance is
removed, a check is made if the option is set, and if so
synchronized_rcu() is called.
The problem is that an iteration is made to reset all the flags to
what they were when the instance was created (to perform clean ups)
was done before the check of the copy_trace_marker option and that
option was cleared, so the synchronize_rcu() was never called.
Move the clearing of all the flags after the check of
copy_trace_marker to do synchronize_rcu() so that the option is still
set if it was before and the synchronization is performed.
- Fix entries setting when validating the persistent ring buffer
When validating the persistent ring buffer on boot up, the number of
events per sub-buffer is added to the sub-buffer meta page. The
validator was updating cpu_buffer->head_page (the first sub-buffer of
the per-cpu buffer) and not the "head_page" variable that was
iterating the sub-buffers. This was causing the first sub-buffer to
be assigned the entries for each sub-buffer and not the sub-buffer
that was supposed to be updated.
- Use "hash" value to update the direct callers
When updating the ftrace direct callers, it assigned a temporary
callback to all the callback functions of the ftrace ops and not just
the functions represented by the passed in hash. This causes an
unnecessary slow down of the functions of the ftrace_ops that is not
being modified. Only update the functions that are going to be
modified to call the ftrace loop function so that the update can be
made on those functions.
* tag 'trace-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Use hash argument for tmp_ops in update_ftrace_direct_mod
ring-buffer: Fix to update per-subbuf entries of persistent ring buffer
tracing: Fix trace_marker copy link list updates
tracing: Fix failure to read user space from system call trace events
tracing: Revert "tracing: Remove pid in task_rename tracing output"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix a sparse build error regression in <linux/local_lock_internal.h>
caused by the locking context-analysis changes"
* tag 'locking-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
include/linux/local_lock_internal.h: Make this header file again compatible with sparse
|
|
Linux 7.0-rc4
Required for the ds4422 series which is build upon;
5187e03b817c ("iio: dac: ds4424: reject -128 RAW value")
|
|
Use the proper kernel-doc format and struct member names to avoid
kernel-doc warnings:
Warning: include/linux/iio/common/st_sensors.h:184 struct member 'int1'
not described in 'st_sensor_data_ready_irq'
Warning: ../include/linux/iio/common/st_sensors.h:184 struct member 'int2'
not described in 'st_sensor_data_ready_irq'
Warning: ../include/linux/iio/common/st_sensors.h:184 struct member
'stat_drdy' not described in 'st_sensor_data_ready_irq'
Warning: ../include/linux/iio/common/st_sensors.h:184 struct member 'ig1'
not described in 'st_sensor_data_ready_irq'
Warning: ../include/linux/iio/common/st_sensors.h:219 struct member
'num_ch' not described in 'st_sensor_settings'
Warning: ../include/linux/iio/common/st_sensors.h:263 struct member
'num_data_channels' not described in 'st_sensor_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document the anonymous SKCIPHER_ALG_COMMON and COMP_ALG_COMMON struct
members in skcipher_alg, scomp_alg, and acomp_alg, following the
existing pattern used by HASH_ALG_COMMON in shash_alg.
This fixes the following kernel-doc warnings:
include/crypto/skcipher.h:166: struct member 'SKCIPHER_ALG_COMMON' not described in 'skcipher_alg'
include/crypto/internal/scompress.h:39: struct member 'COMP_ALG_COMMON' not described in 'scomp_alg'
include/crypto/internal/acompress.h:55: struct member 'COMP_ALG_COMMON' not described in 'acomp_alg'
Signed-off-by: Kit Dallege <xaum.io@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the skcipher algorithm support from crypto/simd.c. It is no
longer used, and it is unlikely to gain any new user in the future,
given the performance issues with this code.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
syzbot reported the following warning:
DEAD callback error for CPU1
WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614
at commit 4ae12d8bd9a8 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux")
which tglx traced to padata_cpu_dead() given it's the only
sub-CPUHP_TEARDOWN_CPU callback that returns an error.
Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU
so move the CPU offline callback to the ONLINE section where failure is
possible.
Fixes: 894c9ef9780c ("padata: validate cpumask without removed CPU during offline")
Reported-by: syzbot+123e1b70473ce213f3af@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69af0a05.050a0220.310d8.002f.GAE@google.com/
Debugged-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The accelerator device supports usage statistics. This patch enables
obtaining the accelerator's usage through the "dev_usage" file.
The returned number expressed as a percentage as a percentage.
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Mark internal fields as "private:" so that kernel-doc comments
are not needed for them, eliminating kernel-doc warnings:
Warning: include/linux/hw_random.h:54 struct member 'list' not described
in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'ref' not described
in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'cleanup_work' not
described in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'cleanup_done' not
described in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'dying' not described
in 'hwrng'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
One major usage of damon_call() is online DAMON parameters update. It is
done by calling damon_commit_ctx() inside the damon_call() callback
function. damon_commit_ctx() can fail for two reasons: 1) invalid
parameters and 2) internal memory allocation failures. In case of
failures, the damon_ctx that attempted to be updated (commit destination)
can be partially updated (or, corrupted from a perspective), and therefore
shouldn't be used anymore. The function only ensures the damon_ctx object
can safely deallocated using damon_destroy_ctx().
The API callers are, however, calling damon_commit_ctx() only after
asserting the parameters are valid, to avoid damon_commit_ctx() fails due
to invalid input parameters. But it can still theoretically fail if the
internal memory allocation fails. In the case, DAMON may run with the
partially updated damon_ctx. This can result in unexpected behaviors
including even NULL pointer dereference in case of damos_commit_dests()
failure [1]. Such allocation failure is arguably too small to fail, so
the real world impact would be rare. But, given the bad consequence, this
needs to be fixed.
Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving
the damon_commit_ctx() failure on the damon_ctx object. For this,
introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it
when it is failed. kdamond_call() checks if the field is set after each
damon_call_control->fn() is executed. If it is set, ignore remaining
callback requests and return. All kdamond_call() callers including
kdamond_fn() also check the maybe_corrupted field right after
kdamond_call() invocations. If the field is set, break the kdamond_fn()
main loop so that DAMON sill doesn't use the context that might be
corrupted.
[sj@kernel.org: let kdamond_call() with cancel regardless of maybe_corrupted]
Link: https://lkml.kernel.org/r/20260320031553.2479-1-sj@kernel.org
Link: https://sashiko.dev/#/patchset/20260319145218.86197-1-sj%40kernel.org
Link: https://lkml.kernel.org/r/20260319145218.86197-1-sj@kernel.org
Link: https://lore.kernel.org/20260319043309.97966-1-sj@kernel.org [1]
Fixes: 3301f1861d34 ("mm/damon/sysfs: handle commit command using damon_call()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Generalize driver_override in the driver core, providing a common
sysfs implementation and concurrency-safe accessors for bus
implementations
- Do not use driver_override as IRQ name in the hwmon axi-fan driver
- Remove an unnecessary driver_override check in sh platform_early
- Migrate the platform bus to use the generic driver_override
infrastructure, fixing a UAF condition caused by accessing the
driver_override field without proper locking in the platform_match()
callback
* tag 'driver-core-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
driver core: platform: use generic driver_override infrastructure
sh: platform_early: remove pdev->driver_override check
hwmon: axi-fan: don't use driver_override as IRQ name
docs: driver-model: document driver_override
driver core: generalize driver_override in struct device
|
|
This reverts commit e3f6a42272e028c46695acc83fc7d7c42f2750ad.
The commit says that the tracepoint only deals with the current task,
however the following case is not current task:
comm_write() {
p = get_proc_task(inode);
if (!p)
return -ESRCH;
if (same_thread_group(current, p))
set_task_comm(p, buffer);
}
where set_task_comm() calls __set_task_comm() which records
the update of p and not current.
So revert the patch to show pid.
Cc: <mhiramat@kernel.org>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <elver@google.com>
Cc: <kees@kernel.org>
Link: https://patch.msgid.link/20260306075954.4533-1-xuewen.yan@unisoc.com
Fixes: e3f6a42272e0 ("tracing: Remove pid in task_rename tracing output")
Reported-by: Guohua Yan <guohua.yan@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Repair all kernel-doc warnings in um_timetravel.h:
- add one enum description
- mark "reserve" as private
- use a leading '@' on current_time
Warning: include/uapi/linux/um_timetravel.h:59 Enum value
'UM_TIMETRAVEL_SHARED_MAX_FDS' not described in enum
'um_timetravel_shared_mem_fds'
Warning: include/uapi/linux/um_timetravel.h:245 union member 'reserve'
not described in 'um_timetravel_schedshm_client'
Warning: include/uapi/linux/um_timetravel.h:288 struct member
'current_time' not described in 'um_timetravel_schedshm'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260226221112.1042008-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Resolve conflict between this change in the upstream kernel:
4c652a47722f ("rseq: Mark rseq_arm_slice_extension_timer() __always_inline")
... and this pending change in timers/core:
0e98eb14814e ("entry: Prepare for deferred hrtimer rearming")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
retrieval
Refactor amdxdna GEM buffer object (BO) handling to simplify address
management and unify BO type semantics.
Introduce helper APIs to retrieve commonly used BO addresses:
- User virtual address (UVA)
- Kernel virtual address (KVA)
- Device address (IOVA/PA)
These helpers centralize address lookup logic and avoid duplicating
BO-specific handling across submission and execution paths. This also
improves readability and reduces the risk of inconsistent address
handling in future changes.
As part of the refactor:
- Rename SHMEM BO type to SHARE to better reflect its usage.
- Merge CMD BO handling into SHARE, removing special-case logic for
command buffers.
- Consolidate BO type handling paths to reduce code duplication and
simplify maintenance.
No functional change is intended. The refactor prepares the driver for
future enhancements by providing a cleaner abstraction for BO address
management.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260320210615.1973016-1-lizhi.hou@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fixes from Kees Cook:
- binfmt_elf_fdpic: fix AUXV size calculation (Andrei Vagin)
- fs/tests: exec: Remove bad test vector
* tag 'execve-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fs/tests: exec: Remove bad test vector
binfmt_elf_fdpic: fix AUXV size calculation for ELF_HWCAP3 and ELF_HWCAP4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/vt and serial driver fixes for 7.0-rc5.
Included in here are:
- 8250 driver fixes for reported problems
- serial core lockup fix
- uartlite driver bugfix
- vt save/restore bugfix
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: save/restore unicode screen buffer for alternate screen
serial: 8250_dw: Ensure BUSY is deasserted
serial: 8250: Add late synchronize_irq() to shutdown to handle DW UART BUSY
serial: 8250_dw: Rework IIR_NO_INT handling to stop interrupt storm
serial: 8250_dw: Rework dw8250_handle_irq() locking and IIR handling
serial: 8250: Add serial8250_handle_irq_locked()
serial: 8250_dw: Avoid unnecessary LCR writes
serial: 8250: Protect LCR write in shutdown
serial: 8250_pci: add support for the AX99100
serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN
serial: uartlite: fix PM runtime usage count underflow on probe
serial: 8250: always disable IRQ during THRE test
serial: 8250: Fix TX deadlock when using DMA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- A bit of a work-around for AF_UNIX recv multishot, as the in-kernel
implementation doesn't properly signal EOF. We'll likely rework this
one going forward, but the fix is sufficient for now
- Two fixes for incrementally consumed buffers, for non-pollable files
and for 0 byte reads
* tag 'io_uring-7.0-20260320' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/kbuf: propagate BUF_MORE through early buffer commit path
io_uring/kbuf: fix missing BUF_MORE for incremental buffers at EOF
io_uring/poll: fix multishot recv missing EOF on wakeup race
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"Intel VT-d:
- Abort all pending requests on dev_tlb_inv timeout to avoid
hardlockup
- Limit IOPF handling to PRI-capable device to avoid SVA attach
failure
AMD-Vi:
- Make sure identity domain is not used when SNP is active
Core fixes:
- Handle mapping IOVA 0x0 correctly
- Fix crash in SVA code
- Kernel-doc fix in IO-PGTable code"
* tag 'iommu-fixes-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/amd: Block identity domain when SNP enabled
iommu/sva: Fix crash in iommu_sva_unbind_device()
iommu/io-pgtable: fix all kernel-doc warnings in io-pgtable.h
iommu: Fix mapping check for 0x0 to avoid re-mapping it
iommu/vt-d: Only handle IOPF for SVA when PRI is supported
iommu/vt-d: Fix intel iommu iotlb sync hardlockup and retry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
- Fix ARM64 MSHV support (Anirudh Rayabharam)
- Fix MSHV driver memory handling issues (Stanislav Kinsburskii)
- Update maintainers for Hyper-V DRM driver (Saurabh Sengar)
- Misc clean up in MSHV crashdump code (Ard Biesheuvel, Uros Bizjak)
- Minor improvements to MSHV code (Mukesh R, Wei Liu)
- Revert not yet released MSHV scrub partition hypercall (Wei Liu)
* tag 'hyperv-fixes-signed-20260319' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: Fix error handling in mshv_region_pin
MAINTAINERS: Update maintainers for Hyper-V DRM driver
mshv: Fix use-after-free in mshv_map_user_memory error path
mshv: pass struct mshv_user_mem_region by reference
x86/hyperv: Use any general-purpose register when saving %cr2 and %cr8
x86/hyperv: Use current_stack_pointer to avoid asm() in hv_hvcrash_ctxt_save()
x86/hyperv: Save segment registers directly to memory in hv_hvcrash_ctxt_save()
x86/hyperv: Use __naked attribute to fix stackless C function
Revert "mshv: expose the scrub partition hypercall"
mshv: add arm64 support for doorbell & intercept SINTs
mshv: refactor synic init and cleanup
x86/hyperv: print out reserved vectors in hexadecimal
|
|
Add a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot
guarantee data persistence on sync (eg fuse). For superblocks with this
flag set, sync kicks off writeback of dirty inodes but does not wait
for the flusher threads to complete the writeback.
This replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in
commit f9a49aa302a0 ("fs/writeback: skip AS_NO_DATA_INTEGRITY mappings
in wait_sb_inodes()"). The flag belongs at the superblock level because
data integrity is a filesystem-wide property, not a per-inode one.
Having this flag at the superblock level also allows us to skip having
to iterate every dirty inode in wait_sb_inodes() only to skip each inode
individually.
Prior to this commit, mappings with no data integrity guarantees skipped
waiting on writeback completion but still waited on the flusher threads
to finish initiating the writeback. Waiting on the flusher threads is
unnecessary. This commit kicks off writeback but does not wait on the
flusher threads. This change properly addresses a recent report [1] for
a suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting
on the flusher threads to finish:
Workqueue: pm_fs_sync pm_fs_sync_work_fn
Call Trace:
<TASK>
__schedule+0x457/0x1720
schedule+0x27/0xd0
wb_wait_for_completion+0x97/0xe0
sync_inodes_sb+0xf8/0x2e0
__iterate_supers+0xdc/0x160
ksys_sync+0x43/0xb0
pm_fs_sync_work_fn+0x17/0xa0
process_one_work+0x193/0x350
worker_thread+0x1a1/0x310
kthread+0xfc/0x240
ret_from_fork+0x243/0x280
ret_from_fork_asm+0x1a/0x30
</TASK>
On fuse this is problematic because there are paths that may cause the
flusher thread to block (eg if systemd freezes the user session cgroups
first, which freezes the fuse daemon, before invoking the kernel
suspend. The kernel suspend triggers ->write_node() which on fuse issues
a synchronous setattr request, which cannot be processed since the
daemon is frozen. Or if the daemon is buggy and cannot properly complete
writeback, initiating writeback on a dirty folio already under writeback
leads to writeback_get_folio() -> folio_prepare_writeback() ->
unconditional wait on writeback to finish, which will cause a hang).
This commit restores fuse to its prior behavior before tmp folios were
removed, where sync was essentially a no-op.
[1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1
Fixes: 0c58a97f919c ("fuse: remove tmp folio for writebacks and internal rb tree")
Reported-by: John <therealgraysky@proton.me>
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260320005145.2483161-2-joannelkoong@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove the following unnecessary forward declarations from fs.h, which
improves maintainability.
- struct hd_geometry: became unused in fs.h when
block_device_operations was moved to blkdev.h in commit 08f858512151
("[PATCH] move block_device_operations to blkdev.h"). The forward
declaration is now added to blkdev.h where it is actually used.
- struct iovec: became unused when aio_read/aio_write were removed in
commit 8436318205b9 ("->aio_read and ->aio_write removed")
- struct iov_iter: duplicate forward declaration. This removes the
redundant second declaration, added in commit 293bc9822fa9
("new methods: ->read_iter() and ->write_iter()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512301303.s7YWTZHA-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202512302139.Wl0soAlz-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202512302105.pmzYfmcV-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202512302125.FNgHwu5z-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202512302108.nIV8r5ES-lkp@intel.com/
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Link: https://patch.msgid.link/20260226201857.27310-2-ytohnuki@amazon.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
This patchset adds new snd_soc_component_regmap_val_bytes(),
and remove component->val_bytes / snd_soc_component_setup_regmap().
Link: https://patch.msgid.link/87a4wdzyxf.wl-kuninori.morimoto.gx@renesas.com
|
|
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
No one is using component->val_bytes. Remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874imlzyv8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
Add snd_soc_component_regmap_val_bytes() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/878qbxzywo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design, which was
made in the context of systems far smaller than today, is based on the
assumption that the to be monitored clocksource (TSC) can be trivially
compared against a known to be stable clocksource (HPET/ACPI-PM timer).
Over the years it turned out that this approach has major flaws:
- Long delays between watchdog invocations can result in wrap arounds
of the reference clocksource
- Scalability of the reference clocksource readout can degrade on large
multi-socket systems due to interconnect congestion
This was addressed with various heuristics which degraded the accuracy of
the watchdog to the point that it fails to detect actual TSC problems on
older hardware which exposes slow inter CPU drifts due to firmware
manipulating the TSC to hide SMI time.
To address this and bring back sanity to the watchdog, rewrite the code
completely with a different approach:
1) Restrict the validation against a reference clocksource to the boot
CPU, which is usually the CPU/Socket closest to the legacy block which
contains the reference source (HPET/ACPI-PM timer). Validate that the
reference readout is within a bound latency so that the actual
comparison against the TSC stays within 500ppm as long as the clocks
are stable.
2) Compare the TSCs of the other CPUs in a round robin fashion against
the boot CPU in the same way the TSC synchronization on CPU hotplug
works. This still can suffer from delayed reaction of the remote CPU
to the SMP function call and the latency of the control variable cache
line. But this latency is not affecting correctness. It only affects
the accuracy. With low contention the readout latency is in the low
nanoseconds range, which detects even slight skews between CPUs. Under
high contention this becomes obviously less accurate, but still
detects slow skews reliably as it solely relies on subsequent readouts
being monotonically increasing. It just can take slightly longer to
detect the issue.
3) Rewrite the watchdog test so it tests the various mechanisms one by
one and validating the result against the expectation.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Daniel J Blueman <daniel@quora.org>
Reviewed-by: Jiri Wiesner <jwiesner@suse.de>
Reviewed-by: Daniel J Blueman <daniel@quora.org>
Link: https://patch.msgid.link/20260123231521.926490888@kernel.org
Link: https://patch.msgid.link/87h5qeomm5.ffs@tglx
|
|
Change /** to /* for the DMA attributes list comment in dma-mapping.h.
The comment is not a kernel-doc structured comment and should not use
the kernel-doc opening marker.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Kit Dallege <xaum.io@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260315171001.66010-1-xaum.io@gmail.com
|
|
When running in an unprivileged domU under Xen, the privcmd driver
is restricted to allow only hypercalls against a target domain, for
which the current domU is acting as a device model.
Add a boot parameter "unrestricted" to allow all hypercalls (the
hypervisor will still refuse destructive hypercalls affecting other
guests).
Make this new parameter effective only in case the domU wasn't started
using secure boot, as otherwise hypercalls targeting the domU itself
might result in violating the secure boot functionality.
This is achieved by adding another lockdown reason, which can be
tested to not being set when applying the "unrestricted" option.
This is part of XSA-482
Signed-off-by: Juergen Gross <jgross@suse.com>
---
V2:
- new patch
|
|
The mapping buffers which carry this attribute require DMA coherent system.
This means that they can't take SWIOTLB path, can perform CPU cache overlap
and doesn't perform cache flushing.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-4-1dde90a7f08b@nvidia.com
|
|
Rename the DMA_ATTR_CPU_CACHE_CLEAN attribute to better reflect that it
is debugging aid to inform DMA core code that CPU cache line overlaps are
allowed, and refine the documentation describing its use.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-3-1dde90a7f08b@nvidia.com
|
|
Tracing prints decoded DMA attribute flags, but it does not yet
include the recently added DMA_ATTR_CPU_CACHE_CLEAN. Add support
for decoding and displaying this attribute in the trace output.
Fixes: 61868dc55a11 ("dma-mapping: add DMA_ATTR_CPU_CACHE_CLEAN")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-2-1dde90a7f08b@nvidia.com
|
|
Drivers having a struct drm_bridge pointer pointing to a bridge in many
cases hold that reference until the owning device is removed. In those
cases the reference to the bridge can be put in the .remove callback
(possibly using devm actions) or in the .destroy func (possibly with the
help of struct drm_bridge::next_bridge). At those moments the driver should
not be operating anymore and won't dereference the bridge pointer after it
is put.
However there are cases when drivers need to stop holding a reference to a
bridge even when their device is not being removed. This is the case for
bridge hot-unplug, when a bridge is removed but the previous entity (bridge
or encoder) is staying. In such case the "previous entity" needs to put it
but cannot do it via devm or .destroy, because it is not being removed.
The easy way to dispose of such pointer is:
drm_bridge_put(my_priv->some_bridge);
my_priv->some_bridge = NULL;
However this is risky because there is a time window between the two lines
where the reference is put, and thus the bridge could be deallocated, but
the pointer is still assigned. If other functions of the same driver were
invoked concurrently they might dereference my_priv->some_bridge during
that window, resulting in use-after-free.
A correct solution is to clear the pointer before putting the reference,
but that needs a temporary variable:
struct drm_bridge *temp = my_priv->some_bridge;
my_priv->some_bridge = NULL;
drm_bridge_put(temp);
This solution is however annoying to write, so the incorrect version might
still sneak in.
Add a simple, easy to use function to put a bridge after setting its
pointer to NULL in the correct way.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260310-drm-bridge-atomic-vs-remove-clear_and_put-v2-1-51fe222f3cf0@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Update the kerneldoc with a more elaborate description of some members,
including the gfp_retry_mayfail member. Use inline kerneldoc.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Christian König <christian.koening@amd.com>
Link: https://patch.msgid.link/20260317141856.237876-4-thomas.hellstrom@linux.intel.com
|
|
In situations where the system is very short on RAM, the shmem
readback from swap-space may invoke the OOM killer.
However, since this might be a recoverable situation where the caller
is indicating this by setting
struct ttm_operation_ctx::gfp_retry_mayfail to true, adjust the gfp
value used by the allocation accordingly.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Christian König <christian.koening@amd.com>
Link: https://patch.msgid.link/20260317141856.237876-3-thomas.hellstrom@linux.intel.com
|
|
Now that all drm_private_objs users have been converted to use
atomic_create_state instead of the old ad-hoc initialization, we can
remove the state parameter from drm_private_obj_init and the fallback
code.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260224-drm-private-obj-reset-v5-4-5a72f8ec9934@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add support for handling aggregation-based interrupts when operating in MCQ
mode.
In legacy interrupt mode, an IE.IAGES is triggered when the counter or
timer threshold is reached. To manage this, the handler now resets the
aggregation counter and timer by writing to the MCQIACRy.CTR register.
Since the register layout of MCQIACRy is identical to the existing UTRIACR
register, this implementation reuses the previously defined bitfield masks
to maintain consistency and reduce code duplication.
Extend ufshcd_handle_mcq_cq_events() with a boolean iag parameter. If set,
the handler resets the MCQ IAG counter and timer.
Define MCQ_IAG_EVENT_STATUS (0x200000) and include it in
UFSHCD_ENABLE_MCQ_INTRS to ensure the interrupt is unmasked during
initialization.
Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260310190308.2474956-1-vamshigajjela@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_ll: Fix firmware leak on error path
- hci_sync: annotate data-races around hdev->req_status
- L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb
- L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
- L2CAP: Fix regressions caused by reusing ident
- L2CAP: Fix stack-out-of-bounds read in l2cap_ecred_conn_req
- MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
- SCO: Fix use-after-free in sco_recv_frame() due to missing sock_hold
* tag 'for-net-2026-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix regressions caused by reusing ident
Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb
Bluetooth: hci_ll: Fix firmware leak on error path
Bluetooth: hci_sync: annotate data-races around hdev->req_status
Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
Bluetooth: SCO: Fix use-after-free in sco_recv_frame() due to missing sock_hold
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
Bluetooth: L2CAP: Fix stack-out-of-bounds read in l2cap_ecred_conn_req
====================
Link: https://patch.msgid.link/20260319190455.135302-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplifies allocations by using a flexible array member in this struct.
Add __counted_by to get extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260318191037.5661-1-rosenp@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add /sys/module/*/import_ns to expose imported namespaces for
currently loaded modules. The file contains one namespace per line and
only exists for modules that import at least one namespace.
Previously, the only way for userspace to inspect the symbol
namespaces a module imports is to locate the .ko on disk and invoke
modinfo(8) to decompress/parse the metadata. The kernel validated
namespaces at load time, but it was otherwise discarded.
Exposing this data via sysfs provides a runtime mechanism to verify
which namespaces are being used by modules. For example, this allows
userspace to audit driver API access in Android GKI, which uses symbol
namespaces to restrict vendor drivers from using specific kernel
interfaces (e.g., direct filesystem access).
Signed-off-by: Nicholas Sielicki <linux@opensource.nslick.com>
[Sami: Updated the commit message to explain motivation.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc5).
net/netfilter/nft_set_rbtree.c
598adea720b97 ("netfilter: revert nft_set_rbtree: validate open interval overlap")
3aea466a43998 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
https://lore.kernel.org/abgaQBpeGstdN4oq@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When io_should_commit() returns true (eg for non-pollable files), buffer
commit happens at buffer selection time and sel->buf_list is set to
NULL. When __io_put_kbufs() generates CQE flags at completion time, it
calls __io_put_kbuf_ring() which finds a NULL buffer_list and hence
cannot determine whether the buffer was consumed or not. This means that
IORING_CQE_F_BUF_MORE is never set for non-pollable input with
incrementally consumed buffers.
Likewise for io_buffers_select(), which always commits upfront and
discards the return value of io_kbuf_commit().
Add REQ_F_BUF_MORE to store the result of io_kbuf_commit() during early
commit. Then __io_put_kbuf_ring() can check this flag and set
IORING_F_BUF_MORE accordingy.
Reported-by: Martin Michaelis <code@mgjm.de>
Cc: stable@vger.kernel.org
Fixes: ae98dbf43d75 ("io_uring/kbuf: add support for incremental buffer consumption")
Link: https://github.com/axboe/liburing/issues/1553
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
|
|
Add the relevant IFC bits for querying an extra migration state from the
device.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20260317161753.18964-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Introduce a core helper function for VFIO_MIG_GET_PRECOPY_INFO and adapt
all drivers to use it.
It centralizes the common code and ensures that output flags are cleared
on entry, in case user opts in to VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2.
This preventing any unintended echoing of userspace data back to
userspace.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20260317161753.18964-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Currently, existing VFIO_MIG_GET_PRECOPY_INFO implementations don't
assign info.flags before copy_to_user().
Because they copy the struct in from userspace first, this effectively
echoes userspace-provided flags back as output, preventing the field
from being used to report new reliable data from the drivers.
Add support for a new device feature named
VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2.
On SET, enables the v2 pre_copy_info behaviour, where the
vfio_precopy_info.flags is a valid output field.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20260317161753.18964-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
As currently defined, initial_bytes is monotonically decreasing and
precedes dirty_bytes when reading from the saving file descriptor.
The transition from initial_bytes to dirty_bytes is unidirectional and
irreversible.
The initial_bytes are considered as critical data that is highly
recommended to be transferred to the target as part of PRE_COPY, without
this data, the PRE_COPY phase would be ineffective.
We come to solve the case when a new chunk of critical data is
introduced during the PRE_COPY phase and the driver would like to report
an entirely new value for the initial_bytes.
For that, we extend the VFIO_MIG_GET_PRECOPY_INFO ioctl with an output
flag named VFIO_PRECOPY_INFO_REINIT to allow drivers reporting a new
initial_bytes value during the PRE_COPY phase.
Currently, existing VFIO_MIG_GET_PRECOPY_INFO implementations don't
assign info.flags before copy_to_user(), this effectively echoes
userspace-provided flags back as output, preventing the field from being
used to report new reliable data from the drivers.
Reliable use of the new VFIO_PRECOPY_INFO_REINIT flag requires userspace
to explicitly opt in by enabling the
VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2 device feature.
When the caller opts in, the driver may report an entirely new
value for initial_bytes. It may be larger, it may be smaller, it may
include the previous unread initial_bytes, it may discard the previous
unread initial_bytes, up to the driver logic and state.
The presence of the VFIO_PRECOPY_INFO_REINIT output flag set by the
driver indicates that new initial data is present on the stream.
Once the caller sees this flag, the initial_bytes value should be
re-evaluated relative to the readiness state for transition to
STOP_COPY.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20260317161753.18964-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
