| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of patches for devicetree files and Arm SoC specific
drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including one regression
for the CPSW network driver and a few runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform, in particular
fixing the MMC device ordering that recently became
nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including a regression
fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the NXP dpio driver
- A regression fix for a bug caused by an earlier bug fix in the
xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
platform"
* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
optee: add writeback to valid memory type
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
MAINTAINERS: Remove myself as LPC32xx maintainers
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
and CAN subtrees.
Current release - regressions:
- gro_cells: reduce number of synchronize_net() calls
- ch_ktls: release a lock before jumping to an error path
Current release - always broken:
- tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header
Previous release - regressions:
- net/tls: fix missing received data after fast remote close
- vsock/virtio: discard packets only when socket is really closed
- sock: set sk_err to ee_errno on dequeue from errq
- cxgb4: fix the panic caused by non smac rewrite
Previous release - always broken:
- tcp: fix corner cases around setting ECN with BPF selection of
congestion control
- tcp: fix race condition when creating child sockets from syncookies
on loopback interface
- usbnet: ipheth: fix connectivity with iOS 14
- tun: honor IOCB_NOWAIT flag
- net/packet: fix packet receive on L3 devices without visible hard
header
- devlink: Make sure devlink instance and port are in same net
namespace
- net: openvswitch: fix TTL decrement action netlink message format
- bonding: wait for sysfs kobject destruction before freeing struct
slave
- net: stmmac: fix upstream patch applied to the wrong context
- bnxt_en: fix return value and unwind in probe error paths
Misc:
- devlink: add extra layer of categorization to the reload stats uAPI
before it's released"
* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
sock: set sk_err to ee_errno on dequeue from errq
mptcp: fix NULL ptr dereference on bad MPJ
net: openvswitch: fix TTL decrement action netlink message format
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
ch_ktls: lock is not freed
net/tls: Protect from calling tls_dev_del for TLS RX twice
devlink: Make sure devlink instance and port are in same net namespace
devlink: Hold rtnl lock while reading netdev attributes
ptp: clockmatrix: bug fix for idtcm_strverscmp
enetc: Let the hardware auto-advance the taprio base-time of 0
gro_cells: reduce number of synchronize_net() calls
net: stmmac: fix incorrect merge of patch upstream
ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
Documentation: netdev-FAQ: suggest how to post co-dependent series
ibmvnic: enhance resetting status check during module exit
...
|
|
Currently, the openvswitch module is not accepting the correctly formated
netlink message for the TTL decrement action. For both setting and getting
the dec_ttl action, the actions should be nested in the
OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi.
When the original patch was sent, it was tested with a private OVS userspace
implementation. This implementation was unfortunately not upstreamed and
reviewed, hence an erroneous version of this patch was sent out.
Leaving the patch as-is would cause problems as the kernel module could
interpret additional attributes as actions and vice-versa, due to the
actions not being encapsulated/nested within the actual attribute, but
being concatinated after it.
Fixes: 744676e77720 ("openvswitch: add TTL decrement action")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull writeback fix from Jan Kara:
"A fix of possible missing string termination in writeback tracepoints"
* tag 'writeback_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
trace: fix potenial dangerous pointer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Userspace might match on prefix bytes of header fields if they are on
the byte boundary, this requires that the mask is adjusted accordingly.
Use NFT_OFFLOAD_MATCH_EXACT() for meta since prefix byte matching is not
allowed for this type of selector.
The bitwise expression might be optimized out by userspace, hence the
kernel needs to infer the prefix from the number of payload bytes to
match on. This patch adds nft_payload_offload_mask() to calculate the
bitmask to match on the prefix.
Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds nft_flow_rule_set_addr_type() to set the address type
from the nft_payload expression accordingly.
If the address type is not set in the control dissector then a rule that
matches either on source or destination IP address does not work.
After this patch, nft hardware offload generates the flow dissector
configuration as tc-flower does to match on an IP address.
This patch has been also tested functionally to make sure packets are
filtered out by the NIC.
This is also getting the code aligned with the existing netfilter flow
offload infrastructure which is also setting the control dissector.
Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
0day reported one -22.7% regression for will-it-scale page_fault2
case [1] on a 4 sockets 144 CPU platform, and bisected to it to be
caused by Waiman's optimization (commit bd0b230fe1) of saving one
'struct page_counter' space for 'struct mem_cgroup'.
Initially we thought it was due to the cache alignment change introduced
by the patch, but further debug shows that it is due to some hot data
members ('vmstats_local', 'vmstats_percpu', 'vmstats') sit in 2 adjacent
cacheline (2N and 2N+1 cacheline), and when adjacent cache line prefetch
is enabled, it triggers an "extended level" of cache false sharing for
2 adjacent cache lines.
So exchange the 2 member blocks, while keeping mostly the original
cache alignment, which can restore and even enhance the performance,
and save 64 bytes of space for 'struct mem_cgroup' (from 2880 to 2816,
with 0day's default RHEL-8.3 kernel config)
[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/
Fixes: bd0b230fe145 ("mm/memcg: unify swap and memsw page counters")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
tls_device_offload_cleanup_rx doesn't clear tls_ctx->netdev after
calling tls_dev_del if TLX TX offload is also enabled. Clearing
tls_ctx->netdev gets postponed until tls_device_gc_task. It leaves a
time frame when tls_device_down may get called and call tls_dev_del for
RX one extra time, confusing the driver, which may lead to a crash.
This patch corrects this racy behavior by adding a flag to prevent
tls_device_down from calling tls_dev_del the second time.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20201125221810.69870-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bdi_dev_name() returns a char [64], and
the __entry->name is a char [32].
It maybe dangerous to TP_printk("%s", __entry->name)
after the strncpy().
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201124165205.GA23937@rlk
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Commit 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY")
addressed the problem that packets were discarded from the Tx AF_XDP
ring, when the driver returned NETDEV_TX_BUSY. Part of the fix was
bumping the skbuff reference count, so that the buffer would not be
freed by dev_direct_xmit(). A reference count larger than one means
that the skbuff is "shared", which is not the case.
If the "shared" skbuff is sent to the generic XDP receive path,
netif_receive_generic_xdp(), and pskb_expand_head() is entered the
BUG_ON(skb_shared(skb)) will trigger.
This patch adds a variant to dev_direct_xmit(), __dev_direct_xmit(),
where a user can select the skbuff free policy. This allows AF_XDP to
avoid bumping the reference count, but still keep the NETDEV_TX_BUSY
behavior.
Fixes: 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201123175600.146255-1-bjorn.topel@gmail.com
|
|
Fix reload stats structure exposed to the user. Change stats structure
hierarchy to have the reload action as a parent of the stat entry and
then stat entry includes value per limit. This will also help to avoid
string concatenation on iproute2 output.
Reload stats structure before this fix:
"stats": {
"reload": {
"driver_reinit": 2,
"fw_activate": 1,
"fw_activate_no_reset": 0
}
}
After this fix:
"stats": {
"reload": {
"driver_reinit": {
"unspecified": 2
},
"fw_activate": {
"unspecified": 1,
"no_reset": 0
}
}
Fixes: a254c264267e ("devlink: Add reload stats")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/1606109785-25197-1-git-send-email-moshe@mellanox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently array of fix length PM_API_MAX is used to cache
the pm_api version (valid or invalid). However ATF based
PM APIs values are much higher then PM_API_MAX.
So to include ATF based PM APIs also, use hash-table to
store the pm_api version status.
Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Fixes: f3217d6f2f7a ("firmware: xilinx: fix out-of-bounds access")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1606197161-25976-1-git-send-email-rajan.vaja@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
In the patchset merged by commit b9fcf0a0d826
("Merge branch 'support-AF_PACKET-for-layer-3-devices'") L3 devices which
did not have header_ops were given one for the purpose of protocol parsing
on af_packet transmit path.
That change made af_packet receive path regard these devices as having a
visible L3 header and therefore aligned incoming skb->data to point to the
skb's mac_header. Some devices, such as ipip, xfrmi, and others, do not
reset their mac_header prior to ingress and therefore their incoming
packets became malformed.
Ideally these devices would reset their mac headers, or af_packet would be
able to rely on dev->hard_header_len being 0 for such cases, but it seems
this is not the case.
Fix by changing af_packet RX ll visibility criteria to include the
existence of a '.create()' header operation, which is used when creating
a device hard header - via dev_hard_header() - by upper layers, and does
not exist in these L3 devices.
As this predicate may be useful in other situations, add it as a common
dev_has_header() helper in netdevice.h.
Fixes: b9fcf0a0d826 ("Merge branch 'support-AF_PACKET-for-layer-3-devices'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201121062817.3178900-1-eyal.birger@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the TCP stack is in SYN flood mode, the server child socket is
created from the SYN cookie received in a TCP packet with the ACK flag
set.
The child socket is created when the server receives the first TCP
packet with a valid SYN cookie from the client. Usually, this packet
corresponds to the final step of the TCP 3-way handshake, the ACK
packet. But is also possible to receive a valid SYN cookie from the
first TCP data packet sent by the client, and thus create a child socket
from that SYN cookie.
Since a client socket is ready to send data as soon as it receives the
SYN+ACK packet from the server, the client can send the ACK packet (sent
by the TCP stack code), and the first data packet (sent by the userspace
program) almost at the same time, and thus the server will equally
receive the two TCP packets with valid SYN cookies almost at the same
instant.
When such event happens, the TCP stack code has a race condition that
occurs between the momement a lookup is done to the established
connections hashtable to check for the existence of a connection for the
same client, and the moment that the child socket is added to the
established connections hashtable. As a consequence, this race condition
can lead to a situation where we add two child sockets to the
established connections hashtable and deliver two sockets to the
userspace program to the same client.
This patch fixes the race condition by checking if an existing child
socket exists for the same client when we are adding the second child
socket to the established connections socket. If an existing child
socket exists, we drop the packet and discard the second child socket
to the same client.
Signed-off-by: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A couple of scheduler fixes:
- Make the conditional update of the overutilized state work
correctly by caching the relevant flags state before overwriting
them and checking them afterwards.
- Fix a data race in the wakeup path which caused loadavg on ARM64
platforms to become a random number generator.
- Fix the ordering of the iowaiter accounting operations so it can't
be decremented before it is incremented.
- Fix a bug in the deadline scheduler vs. priority inheritance when a
non-deadline task A has inherited the parameters of a deadline task
B and then blocks on a non-deadline task C.
The second inheritance step used the static deadline parameters of
task A, which are usually 0, instead of further propagating task
B's parameters. The zero initialized parameters trigger a bug in
the deadline scheduler"
* tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix priority inheritance with multiple scheduling classes
sched: Fix rq->nr_iowait ordering
sched: Fix data-race in wakeup
sched/fair: Fix overutilized update in enqueue_task_fair()
|
|
Merge misc fixes from Andrew Morton:
"8 patches.
Subsystems affected by this patch series: mm (madvise, pagemap,
readahead, memcg, userfaultfd), kbuild, and vfs"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix madvise WILLNEED performance problem
libfs: fix error cast of negative value in simple_attr_write()
mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
mm: memcg/slab: fix root memcg vmstats
mm: fix readahead_page_batch for retry entries
mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
compiler-clang: remove version check for BPF Tracing
mm/madvise: fix memory leak from process_madvise
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A final set of miscellaneous bug fixes for ext4"
* tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix bogus warning in ext4_update_dx_flag()
jbd2: fix kernel-doc markups
ext4: drop fast_commit from /proc/mounts
|
|
Both btrfs and fuse have reported faults caused by seeing a retry entry
instead of the page they were looking for. This was caused by a missing
check in the iterator.
As can be seen in the below panic log, the accessing 0x402 causes a
panic. In the xarray.h, 0x402 means RETRY_ENTRY.
BUG: kernel NULL pointer dereference, address: 0000000000000402
CPU: 14 PID: 306003 Comm: as Not tainted 5.9.0-1-amd64 #1 Debian 5.9.1-1
Hardware name: Lenovo ThinkSystem SR665/7D2VCTO1WW, BIOS D8E106Q-1.01 05/30/2020
RIP: 0010:fuse_readahead+0x152/0x470 [fuse]
Code: 41 8b 57 18 4c 8d 54 10 ff 4c 89 d6 48 8d 7c 24 10 e8 d2 e3 28 f9 48 85 c0 0f 84 fe 00 00 00 44 89 f2 49 89 04 d4 44 8d 72 01 <48> 8b 10 41 8b 4f 1c 48 c1 ea 10 83 e2 01 80 fa 01 19 d2 81 e2 01
RSP: 0018:ffffad99ceaebc50 EFLAGS: 00010246
RAX: 0000000000000402 RBX: 0000000000000001 RCX: 0000000000000002
RDX: 0000000000000000 RSI: ffff94c5af90bd98 RDI: ffffad99ceaebc60
RBP: ffff94ddc1749a00 R08: 0000000000000402 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000100 R12: ffff94de6c429ce0
R13: ffff94de6c4d3700 R14: 0000000000000001 R15: ffffad99ceaebd68
FS: 00007f228c5c7040(0000) GS:ffff94de8ed80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000402 CR3: 0000001dbd9b4000 CR4: 0000000000350ee0
Call Trace:
read_pages+0x83/0x270
page_cache_readahead_unbounded+0x197/0x230
generic_file_buffered_read+0x57a/0xa20
new_sync_read+0x112/0x1a0
vfs_read+0xf8/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 042124cc64c3 ("mm: add new readahead_control API")
Reported-by: David Sterba <dsterba@suse.com>
Reported-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103142852.8543-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20201103124349.16722-1-vvghjk1234@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The core-mm has a default __weak implementation of phys_to_target_node()
to mirror the weak definition of memory_add_physaddr_to_nid(). That
symbol is exported for modules. However, while the export in
mm/memory_hotplug.c exported the symbol in the configuration cases of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=y
...and:
CONFIG_NUMA_KEEP_MEMINFO=n
CONFIG_MEMORY_HOTPLUG=y
...it failed to export the symbol in the case of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=n
Not only is that broken, but Christoph points out that the kernel should
not be exporting any __weak symbol, which means that
memory_add_physaddr_to_nid() example that phys_to_target_node() copied
is broken too.
Rework the definition of phys_to_target_node() and
memory_add_physaddr_to_nid() to not require weak symbols. Move to the
common arch override design-pattern of an asm header defining a symbol
to replace the default implementation.
The only common header that all memory_add_physaddr_to_nid() producing
architectures implement is asm/sparsemem.h. In fact, powerpc already
defines its memory_add_physaddr_to_nid() helper in sparsemem.h.
Double-down on that observation and define phys_to_target_node() where
necessary in asm/sparsemem.h. An alternate consideration that was
discarded was to put this override in asm/numa.h, but that entangles
with the definition of MAX_NUMNODES relative to the inclusion of
linux/nodemask.h, and requires powerpc to grow a new header.
The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid
now that the symbol is properly exported / stubbed in all combinations
of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG.
[dan.j.williams@intel.com: v4]
Link: https://lkml.kernel.org/r/160461461867.1505359.5301571728749534585.stgit@dwillia2-desk3.amr.corp.intel.com
[dan.j.williams@intel.com: powerpc: fix create_section_mapping compile warning]
Link: https://lkml.kernel.org/r/160558386174.2948926.2740149041249041764.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: a035b6bf863e ("mm/memory_hotplug: introduce default phys_to_target_node() implementation")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/160447639846.1133764.7044090803980177548.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
bpftrace parses the kernel headers and uses Clang under the hood.
Remove the version check when __BPF_TRACING__ is defined (as bpftrace
does) so that this tool can continue to parse kernel headers, even with
older clang sources.
Fixes: commit 1f7a44f63e6c ("compiler-clang: add build check for clang 10.0.1")
Reported-by: Chen Yu <yu.chen.surf@gmail.com>
Reported-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lkml.kernel.org/r/20201104191052.390657-1-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzkaller found that with CONFIG_DEBUG_KOBJECT_RELEASE=y, releasing a
struct slave device could result in the following splat:
kobject: 'bonding_slave' (00000000cecdd4fe): kobject_release, parent 0000000074ceb2b2 (delayed 1000)
bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
------------[ cut here ]------------
ODEBUG: free active (active state 0) object type: timer_list hint: workqueue_select_cpu_near kernel/workqueue.c:1549 [inline]
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x98 kernel/workqueue.c:1600
WARNING: CPU: 1 PID: 842 at lib/debugobjects.c:485 debug_print_object+0x180/0x240 lib/debugobjects.c:485
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 842 Comm: kworker/u4:4 Tainted: G S 5.9.0-rc8+ #96
Hardware name: linux,dummy-virt (DT)
Workqueue: netns cleanup_net
Call trace:
dump_backtrace+0x0/0x4d8 include/linux/bitmap.h:239
show_stack+0x34/0x48 arch/arm64/kernel/traps.c:142
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x174/0x1f8 lib/dump_stack.c:118
panic+0x360/0x7a0 kernel/panic.c:231
__warn+0x244/0x2ec kernel/panic.c:600
report_bug+0x240/0x398 lib/bug.c:198
bug_handler+0x50/0xc0 arch/arm64/kernel/traps.c:974
call_break_hook+0x160/0x1d8 arch/arm64/kernel/debug-monitors.c:322
brk_handler+0x30/0xc0 arch/arm64/kernel/debug-monitors.c:329
do_debug_exception+0x184/0x340 arch/arm64/mm/fault.c:864
el1_dbg+0x48/0xb0 arch/arm64/kernel/entry-common.c:65
el1_sync_handler+0x170/0x1c8 arch/arm64/kernel/entry-common.c:93
el1_sync+0x80/0x100 arch/arm64/kernel/entry.S:594
debug_print_object+0x180/0x240 lib/debugobjects.c:485
__debug_check_no_obj_freed lib/debugobjects.c:967 [inline]
debug_check_no_obj_freed+0x200/0x430 lib/debugobjects.c:998
slab_free_hook mm/slub.c:1536 [inline]
slab_free_freelist_hook+0x190/0x210 mm/slub.c:1577
slab_free mm/slub.c:3138 [inline]
kfree+0x13c/0x460 mm/slub.c:4119
bond_free_slave+0x8c/0xf8 drivers/net/bonding/bond_main.c:1492
__bond_release_one+0xe0c/0xec8 drivers/net/bonding/bond_main.c:2190
bond_slave_netdev_event drivers/net/bonding/bond_main.c:3309 [inline]
bond_netdev_event+0x8f0/0xa70 drivers/net/bonding/bond_main.c:3420
notifier_call_chain+0xf0/0x200 kernel/notifier.c:83
__raw_notifier_call_chain kernel/notifier.c:361 [inline]
raw_notifier_call_chain+0x44/0x58 kernel/notifier.c:368
call_netdevice_notifiers_info+0xbc/0x150 net/core/dev.c:2033
call_netdevice_notifiers_extack net/core/dev.c:2045 [inline]
call_netdevice_notifiers net/core/dev.c:2059 [inline]
rollback_registered_many+0x6a4/0xec0 net/core/dev.c:9347
unregister_netdevice_many.part.0+0x2c/0x1c0 net/core/dev.c:10509
unregister_netdevice_many net/core/dev.c:10508 [inline]
default_device_exit_batch+0x294/0x338 net/core/dev.c:10992
ops_exit_list.isra.0+0xec/0x150 net/core/net_namespace.c:189
cleanup_net+0x44c/0x888 net/core/net_namespace.c:603
process_one_work+0x96c/0x18c0 kernel/workqueue.c:2269
worker_thread+0x3f0/0xc30 kernel/workqueue.c:2415
kthread+0x390/0x498 kernel/kthread.c:292
ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:925
This is a potential use-after-free if the sysfs nodes are being accessed
whilst removing the struct slave, so wait for the object destruction to
complete before freeing the struct slave itself.
Fixes: 07699f9a7c8d ("bonding: add sysfs /slave dir for bond slave devices.")
Fixes: a068aab42258 ("bonding: Fix reference count leak in bond_sysfs_slave_add.")
Cc: Qiushi Wu <wu000273@umn.edu>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20201120142827.879226-1-jamie@nuviainc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes for two fairly obscure but annoying when triggered races in
iSCSI"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: Fix cmd abort fabric stop race
scsi: libiscsi: Fix NOP race condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull iommu fixes from Will Deacon:
"Two straightforward vt-d fixes:
- Fix boot when intel iommu initialisation fails under TXT (tboot)
- Fix intel iommu compilation error when DMAR is enabled without ATS
and temporarily update IOMMU MAINTAINERs entry"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
MAINTAINERS: Temporarily add myself to the IOMMU entry
iommu/vt-d: Fix compile error with CONFIG_PCI_ATS not set
iommu/vt-d: Avoid panic if iommu init fails in tboot system
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes: the only core change is a minor error
code handling in the control API, and all the rest are device-specific
fixes, mostly quirks, fixups and ASoC Intel fixes.
It looks boring, and good so"
* tag 'sound-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: mixart: Fix mutex deadlock
ALSA: hda/ca0132: Fix compile warning without PCI
ASOC: Intel: kbl_rt5663_rt5514_max98927: Do not try to disable disabled clock
ALSA: usb-audio: Add delay quirk for all Logitech USB devices
ASoC: Intel: catpt: Correct clock selection for dai trigger
ASoC: Intel: catpt: Skip position update for unprepared streams
ASoC: qcom: lpass-platform: Fix memory leak
ASoC: Intel: KMB: Fix S24_LE configuration
ALSA: hda: Add Alderlake-S PCI ID and HDMI codec vid
ALSA: usb-audio: Use ALC1220-VB-DT mapping for ASUS ROG Strix TRX40 mobo
ALSA: firewire: Clean up a locking issue in copy_resp_to_buf()
ASoC: rt1015: increase the time to detect BCLK
ALSA: ctl: fix error path at adding user-defined element set
ALSA: hda/realtek - HP Headset Mic can't detect after boot
ALSA: hda/realtek - Add supported mute Led for HP
ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220)
ALSA: hda/realtek - Add supported for Lenovo ThinkPad Headset Button
ASoC: rt1015: add delay to fix pop noise from speaker
|
|
Fix a bug that is triggered when a partially setup socket is
destroyed. For a fully setup socket, a socket that has been bound to a
device, the cleanup of the umem is performed at the end of the buffer
pool's cleanup work queue item. This has to be performed in a work
queue, and not in RCU cleanup, as it is doing a vunmap that cannot
execute in interrupt context. However, when a socket has only been
partially set up so that a umem has been created but the buffer pool
has not, the code erroneously directly calls the umem cleanup function
instead of using a work queue, and this leads to a BUG_ON() in
vunmap().
As there in this case is no buffer pool, we cannot use its work queue,
so we need to introduce a work queue for the umem and schedule this for
the cleanup. So in the case there is no pool, we are going to use the
umem's own work queue to schedule the cleanup. But if there is a
pool, the cleanup of the umem is still being performed by the pool's
work queue, as it is important that the umem is cleaned up after the
pool.
Fixes: e5e1a4bc916d ("xsk: Fix possible memory leak at socket close")
Reported-by: Marek Majtyka <marekx.majtyka@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Marek Majtyka <marekx.majtyka@intel.com>
Link: https://lore.kernel.org/bpf/1605873219-21629-1-git-send-email-magnus.karlsson@gmail.com
|
|
Kernel-doc markup should use this format:
identifier - description
They should not have any type before that, as otherwise
the parser won't do the right thing.
Also, some identifiers have different names between their
prototypes and the kernel-doc markup.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/72f5c6628f5f278d67625f60893ffbc2ca28d46e.1605521731.git.mchehab+huawei@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc5, including fixes from the WiFi
(mac80211), can and bpf (including the strncpy_from_user fix).
Current release - regressions:
- mac80211: fix memory leak of filtered powersave frames
- mac80211: free sta in sta_info_insert_finish() on errors to avoid
sleeping in atomic context
- netlabel: fix an uninitialized variable warning added in -rc4
Previous release - regressions:
- vsock: forward all packets to the host when no H2G is registered,
un-breaking AWS Nitro Enclaves
- net: Exempt multicast addresses from five-second neighbor lifetime
requirement, decreasing the chances neighbor tables fill up
- net/tls: fix corrupted data in recvmsg
- qed: fix ILT configuration of SRC block
- can: m_can: process interrupt only when not runtime suspended
Previous release - always broken:
- page_frag: Recover from memory pressure by not recycling pages
allocating from the reserves
- strncpy_from_user: Mask out bytes after NUL terminator
- ip_tunnels: Set tunnel option flag only when tunnel metadata is
present, always setting it confuses Open vSwitch
- bpf, sockmap:
- Fix partial copy_page_to_iter so progress can still be made
- Fix socket memory accounting and obeying SO_RCVBUF
- net: Have netpoll bring-up DSA management interface
- net: bridge: add missing counters to ndo_get_stats64 callback
- tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt
- enetc: Workaround MDIO register access HW bug
- net/ncsi: move netlink family registration to a subsystem init,
instead of tying it to driver probe
- net: ftgmac100: unregister NC-SI when removing driver to avoid
crash
- lan743x:
- prevent interrupt storm on open
- fix freeing skbs in the wrong context
- net/mlx5e: Fix socket refcount leak on kTLS RX resync
- net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097
- fix 21 unset return codes and other mistakes on error paths, mostly
detected by the Hulk Robot"
* tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits)
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
net/smc: fix matching of existing link groups
ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
libbpf: Fix VERSIONED_SYM_COUNT number parsing
net/mlx4_core: Fix init_hca fields offset
atm: nicstar: Unmap DMA on send error
page_frag: Recover from memory pressure
net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
mlxsw: core: Use variable timeout for EMAD retries
mlxsw: Fix firmware flashing
net: Have netpoll bring-up DSA management interface
atl1e: fix error return code in atl1e_probe()
atl1c: fix error return code in atl1c_probe()
ah6: fix error return code in ah6_input()
net: usb: qmi_wwan: Set DTR quirk for MR400
can: m_can: process interrupt only when not runtime suspended
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"This is a relatively large set of fixes, the bulk of it being a series
from Lukas Wunner which fixes confusion with the lifetime of driver
data allocated along with the SPI controller structure that's been
created as part of the conversion to devm APIs.
The simplest fix, explained in detail in Lukas' commit message, is to
move to a devm_ function for allocation of the controller and hence
driver data in order to push the free of that after anything tries to
reference the driver data in the remove path. This results in a
relatively large diff due to the addition of a new function but isn't
particularly complex.
There's also a fix from Sven van Asbroeck which fixes yet more fallout
from the conflicts between the various different places one can
configure the polarity of GPIOs in modern systems.
Otherwise everything is fairly small and driver specific"
* tag 'spi-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: npcm-fiu: Don't leak SPI master in probe error path
spi: dw: Set transfer handler before unmasking the IRQs
spi: cadence-quadspi: Fix error return code in cqspi_probe
spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe
spi: lpspi: Fix use-after-free on unbind
spi: bcm-qspi: Fix use-after-free on unbind
spi: bcm2835aux: Fix use-after-free on unbind
spi: bcm2835: Fix use-after-free on unbind
spi: Introduce device-managed SPI controller allocation
spi: fsi: Fix transfer returning without finalizing message
spi: fix client driver breakages when using GPIO descriptors
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.11
A collection of driver specific fixes, mostly for x86 systems (or CODECs
used mostly on x86) and all for relatively minor issues, the biggest one
being fixing S24_LE format on Keem Bay systems.
|
|
IPV6=m
NF_DEFRAG_IPV6=y
ld: net/ipv6/netfilter/nf_conntrack_reasm.o: in function
`nf_ct_frag6_gather':
net/ipv6/netfilter/nf_conntrack_reasm.c:462: undefined reference to
`ipv6_frag_thdr_truncated'
Netfilter is depending on ipv6 symbol ipv6_frag_thdr_truncated. This
dependency is forcing IPV6=y.
Remove this dependency by moving ipv6_frag_thdr_truncated out of ipv6. This
is the same solution as used with a similar issues: Referring to
commit 70b095c843266 ("ipv6: remove dependency of nf_defrag_ipv6 on ipv6
module")
Fixes: 9d9e937b1c8b ("ipv6/netfilter: Discard first fragment not including all headers")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201119095833.8409-1-geokohma@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Align the bootconfig applied initrd image size to 4. To fill the gap,
the bootconfig command uses null characters in between the bootconfig
data and the footer. This will expands the footer size but don't change
the checksum.
Thus the block image of the initrd file with bootconfig is as follows.
[initrd][bootconfig][(pad)][size][csum]["#BOOTCONFIG\n"]
Link: https://lkml.kernel.org/r/160576522046.320071.8550680670010950634.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Pull nfsd fix from Bruce Fields:
"Just one quick fix for a tracing oops"
* tag 'nfsd-5.10-2' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Fix oops in the rpc_xdr_buf event class
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
"Several fixes to Kunit documentation and tools, and to not pollute
the source directory.
Also remove the incorrect kunit .gitattributes file"
* tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix display of failed expectations for strings
kunit: tool: fix extra trailing \n in raw + parsed test output
kunit: tool: print out stderr from make (like build warnings)
KUnit: Docs: usage: wording fixes
KUnit: Docs: style: fix some Kconfig example issues
KUnit: Docs: fix a wording typo
kunit: Do not pollute source directory with generated files (test.log)
kunit: Do not pollute source directory with generated files (.kunitconfig)
kunit: tool: fix pre-existing python type annotation errors
kunit: Fix kunit.py parse subcommand (use null build_dir)
kunit: tool: unmark test_data as binary blobs
|
|
"intel_iommu=off" command line is used to disable iommu but iommu is force
enabled in a tboot system for security reason.
However for better performance on high speed network device, a new option
"intel_iommu=tboot_noforce" is introduced to disable the force on.
By default kernel should panic if iommu init fail in tboot for security
reason, but it's unnecessory if we use "intel_iommu=tboot_noforce,off".
Fix the code setting force_on and move intel_iommu_tboot_noforce
from tboot code to intel iommu code.
Fixes: 7304e8f28bb2 ("iommu/vt-d: Correctly disable Intel IOMMU force on")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Tested-by: Lukasz Hawrylko <lukasz.hawrylko@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201110071908.3133-1-zhenzhong.duan@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In async_resync mode, we log the TCP seq of records until the async request
is completed. Later, in case one of the logged seqs matches the resync
request, we return it, together with its record serial number. Before this
fix, we mistakenly returned the serial number of the current record
instead.
Fixes: ed9b7646b06a ("net/tls: Add asynchronous resync")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Link: https://lore.kernel.org/r/20201115131448.2702-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Glenn reported that "an application [he developed produces] a BUG in
deadline.c when a SCHED_DEADLINE task contends with CFS tasks on nested
PTHREAD_PRIO_INHERIT mutexes. I believe the bug is triggered when a CFS
task that was boosted by a SCHED_DEADLINE task boosts another CFS task
(nested priority inheritance).
------------[ cut here ]------------
kernel BUG at kernel/sched/deadline.c:1462!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 12 PID: 19171 Comm: dl_boost_bug Tainted: ...
Hardware name: ...
RIP: 0010:enqueue_task_dl+0x335/0x910
Code: ...
RSP: 0018:ffffc9000c2bbc68 EFLAGS: 00010002
RAX: 0000000000000009 RBX: ffff888c0af94c00 RCX: ffffffff81e12500
RDX: 000000000000002e RSI: ffff888c0af94c00 RDI: ffff888c10b22600
RBP: ffffc9000c2bbd08 R08: 0000000000000009 R09: 0000000000000078
R10: ffffffff81e12440 R11: ffffffff81e1236c R12: ffff888bc8932600
R13: ffff888c0af94eb8 R14: ffff888c10b22600 R15: ffff888bc8932600
FS: 00007fa58ac55700(0000) GS:ffff888c10b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa58b523230 CR3: 0000000bf44ab003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? intel_pstate_update_util_hwp+0x13/0x170
rt_mutex_setprio+0x1cc/0x4b0
task_blocks_on_rt_mutex+0x225/0x260
rt_spin_lock_slowlock_locked+0xab/0x2d0
rt_spin_lock_slowlock+0x50/0x80
hrtimer_grab_expiry_lock+0x20/0x30
hrtimer_cancel+0x13/0x30
do_nanosleep+0xa0/0x150
hrtimer_nanosleep+0xe1/0x230
? __hrtimer_init_sleeper+0x60/0x60
__x64_sys_nanosleep+0x8d/0xa0
do_syscall_64+0x4a/0x100
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fa58b52330d
...
---[ end trace 0000000000000002 ]—
He also provided a simple reproducer creating the situation below:
So the execution order of locking steps are the following
(N1 and N2 are non-deadline tasks. D1 is a deadline task. M1 and M2
are mutexes that are enabled * with priority inheritance.)
Time moves forward as this timeline goes down:
N1 N2 D1
| | |
| | |
Lock(M1) | |
| | |
| Lock(M2) |
| | |
| | Lock(M2)
| | |
| Lock(M1) |
| (!!bug triggered!) |
Daniel reported a similar situation as well, by just letting ksoftirqd
run with DEADLINE (and eventually block on a mutex).
Problem is that boosted entities (Priority Inheritance) use static
DEADLINE parameters of the top priority waiter. However, there might be
cases where top waiter could be a non-DEADLINE entity that is currently
boosted by a DEADLINE entity from a different lock chain (i.e., nested
priority chains involving entities of non-DEADLINE classes). In this
case, top waiter static DEADLINE parameters could be null (initialized
to 0 at fork()) and replenish_dl_entity() would hit a BUG().
Fix this by keeping track of the original donor and using its parameters
when a task is boosted.
Reported-by: Glenn Elliott <glenn@aurora.tech>
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201117061432.517340-1-juri.lelli@redhat.com
|
|
Mel reported that on some ARM64 platforms loadavg goes bananas and
Will tracked it down to the following race:
CPU0 CPU1
schedule()
prev->sched_contributes_to_load = X;
deactivate_task(prev);
try_to_wake_up()
if (p->on_rq &&) // false
if (smp_load_acquire(&p->on_cpu) && // true
ttwu_queue_wakelist())
p->sched_remote_wakeup = Y;
smp_store_release(prev->on_cpu, 0);
where both p->sched_contributes_to_load and p->sched_remote_wakeup are
in the same word, and thus the stores X and Y race (and can clobber
one another's data).
Whereas prior to commit c6e7bd7afaeb ("sched/core: Optimize ttwu()
spinning on p->on_cpu") the p->on_cpu handoff serialized access to
p->sched_remote_wakeup (just as it still does with
p->sched_contributes_to_load) that commit broke that by calling
ttwu_queue_wakelist() with p->on_cpu != 0.
However, due to
p->XXX = X ttwu()
schedule() if (p->on_rq && ...) // false
smp_mb__after_spinlock() if (smp_load_acquire(&p->on_cpu) &&
deactivate_task() ttwu_queue_wakelist())
p->on_rq = 0; p->sched_remote_wakeup = Y;
We can be sure any 'current' store is complete and 'current' is
guaranteed asleep. Therefore we can move p->sched_remote_wakeup into
the current flags word.
Note: while the observed failure was loadavg accounting gone wrong due
to ttwu() cobbering p->sched_contributes_to_load, the reverse problem
is also possible where schedule() clobbers p->sched_remote_wakeup,
this could result in enqueue_entity() wrecking ->vruntime and causing
scheduling artifacts.
Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu")
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Debugged-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201117083016.GK3121392@hirez.programming.kicks-ass.net
|
|
iSCSI NOPs are sometimes "lost", mistakenly sent to the user-land iscsid
daemon instead of handled in the kernel, as they should be, resulting in a
message from the daemon like:
iscsid: Got nop in, but kernel supports nop handling.
This can occur because of the new forward- and back-locks, and the fact
that an iSCSI NOP response can occur before processing of the NOP send is
complete. This can result in "conn->ping_task" being NULL in
iscsi_nop_out_rsp(), when the pointer is actually in the process of being
set.
To work around this, we add a new state to the "ping_task" pointer. In
addition to NULL (not assigned) and a pointer (assigned), we add the state
"being set", which is signaled with an INVALID pointer (using "-1").
Link: https://lore.kernel.org/r/20201106193317.16993-1-leeman.duncan@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull vhost fixes from Michael Tsirkin:
"Fixes all over the place, most notably vhost scsi IO error fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost scsi: Add support for LUN resets.
vhost scsi: add lun parser helper
vhost scsi: fix cmd completion race
vhost scsi: alloc cmds per vq instead of session
vhost: add helper to check if a vq has been setup
vdpasim: fix "mac_pton" undefined error
swiotlb: using SIZE_MAX needs limits.h included
|
|
Packets are processed even though the first fragment don't include all
headers through the upper layer header. This breaks TAHI IPv6 Core
Conformance Test v6LC.1.3.6.
Referring to RFC8200 SECTION 4.5: "If the first fragment does not include
all headers through an Upper-Layer header, then that fragment should be
discarded and an ICMP Parameter Problem, Code 3, message should be sent to
the source of the fragment, with the Pointer field set to zero."
The fragment needs to be validated the same way it is done in
commit 2efdaaaf883a ("IPv6: reply ICMP error if the first fragment don't
include all headers") for ipv6. Wrap the validation into a common function,
ipv6_frag_thdr_truncated() to check for truncation in the upper layer
header. This validation does not fullfill all aspects of RFC 8200,
section 4.5, but is at the moment sufficient to pass mentioned TAHI test.
In netfilter, utilize the fragment offset returned by find_prev_fhdr() to
let ipv6_frag_thdr_truncated() start it's traverse from the fragment
header.
Return 0 to drop the fragment in the netfilter. This is the same behaviour
as used on other protocol errors in this function, e.g. when
nf_ct_frag6_queue() returns -EPROTO. The Fragment will later be picked up
by ipv6_frag_rcv() in reassembly.c. ipv6_frag_rcv() will then send an
appropriate ICMP Parameter Problem message back to the source.
References commit 2efdaaaf883a ("IPv6: reply ICMP error if the first
fragment don't include all headers")
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20201111115025.28879-1-geokohma@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In many case, we need to check return value of pm_runtime_get_sync, but
it brings a trouble to the usage counter processing. Many callers forget
to decrease the usage counter when it failed, which could resulted in
reference leak. It has been discussed a lot[0][1]. So we add a function
to deal with the usage counter for better coding.
[0]https://lkml.org/lkml/2020/6/14/88
[1]https://patchwork.ozlabs.org/project/linux-tegra/list/?series=178139
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stefan Agner reported a bug when using zsram on 32-bit Arm machines
with RAM above the 4GB address boundary:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = a27bd01c
[00000000] *pgd=236a0003, *pmd=1ffa64003
Internal error: Oops: 207 [#1] SMP ARM
Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
Hardware name: BCM2711
PC is at zs_map_object+0x94/0x338
LR is at zram_bvec_rw.constprop.0+0x330/0xa64
pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013
sp : e376bbe0 ip : 00000000 fp : c1e2921c
r10: 00000002 r9 : c1dda730 r8 : 00000000
r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000
r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 30c5383d Table: 235c2a80 DAC: fffffffd
Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
Stack: (0xe376bbe0 to 0xe376c000)
As it turns out, zsram needs to know the maximum memory size, which
is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.
The same problem will be hit on all 32-bit architectures that have a
physical address space larger than 4GB and happen to not enable sparsemem
and include asm/sparsemem.h from asm/pgtable.h.
After the initial discussion, I suggested just always defining
MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
set, or provoking a build error otherwise. This addresses all
configurations that can currently have this runtime bug, but
leaves all other configurations unchanged.
I looked up the possible number of bits in source code and
datasheets, here is what I found:
- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
- on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
support more than 32 bits, even though supersections in theory allow
up to 40 bits as well.
- on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
XPA supports up to 60 bits in theory, but 40 bits are more than
anyone will ever ship
- On PowerPC, there are three different implementations of 36 bit
addressing, but 32-bit is used without CONFIG_PTE_64BIT
- On RISC-V, the normal page table format can support 34 bit
addressing. There is no highmem support on RISC-V, so anything
above 2GB is unused, but it might be useful to eventually support
CONFIG_ZRAM for high pages.
Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of fixes for perf:
- A set of commits which reduce the stack usage of various perf
event handling functions which allocated large data structs on
stack causing stack overflows in the worst case
- Use the proper mechanism for detecting soft interrupts in the
recursion protection
- Make the resursion protection simpler and more robust
- Simplify the scheduling of event groups to make the code more
robust and prepare for fixing the issues vs. scheduling of
exclusive event groups
- Prevent event multiplexing and rotation for exclusive event groups
- Correct the perf event attribute exclusive semantics to take
pinned events, e.g. the PMU watchdog, into account
- Make the anythread filtering conditional for Intel's generic PMU
counters as it is not longer guaranteed to be supported on newer
CPUs. Check the corresponding CPUID leaf to make sure
- Fixup a duplicate initialization in an array which was probably
caused by the usual 'copy & paste - forgot to edit' mishap"
* tag 'perf-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix Add BW copypasta
perf/x86/intel: Make anythread filter support conditional
perf: Tweak perf_event_attr::exclusive semantics
perf: Fix event multiplexing for exclusive groups
perf: Simplify group_sched_in()
perf: Simplify group_sched_out()
perf/x86: Make dummy_iregs static
perf/arch: Remove perf_sample_data::regs_user_copy
perf: Optimize get_recursion_context()
perf: Fix get_recursion_context()
perf/x86: Reduce stack usage for x86_pmu::drain_pebs()
perf: Reduce stack usage of perf_output_begin()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fix and cleanup from Dennis Zhou:
"A fix for a Wshadow warning in the asm-generic percpu macros came in
and then I tacked on the removal of flexible array initializers in the
percpu allocator"
* 'for-5.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: convert flexible array initializers to use struct_size()
asm-generic: percpu: avoid Wshadow warning
|
|
Merge fixes from Andrew Morton:
"14 patches.
Subsystems affected by this patch series: mm (migration, vmscan, slub,
gup, memcg, hugetlbfs), mailmap, kbuild, reboot, watchdog, panic, and
ocfs2"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
ocfs2: initialize ip_next_orphan
panic: don't dump stack twice on warn
hugetlbfs: fix anon huge page migration race
mm: memcontrol: fix missing wakeup polling thread
kernel/watchdog: fix watchdog_allowed_mask not used warning
reboot: fix overflow parsing reboot cpu number
Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint"
compiler.h: fix barrier_data() on clang
mm/gup: use unpin_user_pages() in __gup_longterm_locked()
mm/slub: fix panic in slab_alloc_node()
mailmap: fix entry for Dmitry Baryshkov/Eremin-Solenikov
mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit
mm/compaction: stop isolation if too many pages are isolated and we have pages to migrate
mm/compaction: count pages and stop correctly during page isolation
|
|
When we poll the swap.events, we can miss being woken up when the swap
event occurs. Because we didn't notify.
Fixes: f3a53a3a1e5b ("mm, memcontrol: implement memory.swap.events")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Tejun Heo <tj@kernel.org>
Link: https://lkml.kernel.org/r/20201105161936.98312-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h
mutually exclusive") neglected to copy barrier_data() from
compiler-gcc.h into compiler-clang.h.
The definition in compiler-gcc.h was really to work around clang's more
aggressive optimization, so this broke barrier_data() on clang, and
consequently memzero_explicit() as well.
For example, this results in at least the memzero_explicit() call in
lib/crypto/sha256.c:sha256_transform() being optimized away by clang.
Fix this by moving the definition of barrier_data() into compiler.h.
Also move the gcc/clang definition of barrier() into compiler.h,
__memory_barrier() is icc-specific (and barrier() is already defined
using it in compiler-intel.h) and doesn't belong in compiler.h.
[rdunlap@infradead.org: fix ALPHA builds when SMP is not enabled]
Link: https://lkml.kernel.org/r/20201101231835.4589-1-rdunlap@infradead.org
Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201014212631.207844-1-nivedita@alum.mit.edu
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, we may set the tunnel option flag when the size of metadata
is zero. For example, we set TUNNEL_GENEVE_OPT in the receive function
no matter the geneve option is present or not. As this may result in
issues on the tunnel flags consumers, this patch fixes the issue.
Related discussion:
* https://lore.kernel.org/netdev/1604448694-19351-1-git-send-email-yihung.wei@gmail.com/T/#u
Fixes: 256c87c17c53 ("net: check tunnel option type in tunnel flags")
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Link: https://lore.kernel.org/r/1605053800-74072-1-git-send-email-yihung.wei@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull fs freeze fix and cleanups from Darrick Wong:
"A single vfs fix for 5.10, along with two subsequent cleanups.
A very long time ago, a hack was added to the vfs fs freeze protection
code to work around lockdep complaints about XFS, which would try to
run a transaction (which requires intwrite protection) to finalize an
xfs freeze (by which time the vfs had already taken intwrite).
Fast forward a few years, and XFS fixed the recursive intwrite problem
on its own, and the hack became unnecessary. Fast forward almost a
decade, and latent bugs in the code converting this hack from freeze
flags to freeze locks combine with lockdep bugs to make this reproduce
frequently enough to notice page faults racing with freeze.
Since the hack is unnecessary and causes thread race errors, just get
rid of it completely. Making this kind of vfs change midway through a
cycle makes me nervous, but a large enough number of the usual
VFS/ext4/XFS/btrfs suspects have said this looks good and solves a
real problem vector.
And once that removal is done, __sb_start_write is now simple enough
that it becomes possible to refactor the function into smaller,
simpler static inline helpers in linux/fs.h. The cleanup is
straightforward.
Summary:
- Finally remove the "convert to trylock" weirdness in the fs freezer
code. It was necessary 10 years ago to deal with nested
transactions in XFS, but we've long since removed that; and now
this is causing subtle race conditions when lockdep goes offline
and sb_start_* aren't prepared to retry a trylock failure.
- Minor cleanups of the sb_start_* fs freeze helpers"
* tag 'vfs-5.10-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: move __sb_{start,end}_write* to fs.h
vfs: separate __sb_start_write into blocking and non-blocking helpers
vfs: remove lockdep bogosity in __sb_start_write
|
