summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2018-11-29Merge v4.20-rc4 into drm-nextDave Airlie15-107/+256
Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-11-29Merge tag 'drm-misc-next-2018-11-28' of ↵Dave Airlie6-103/+27
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21: Core Changes: - Merge drm_info.c into drm_debugfs.c - Complete the fake drm_crtc_commit's hw_done/flip_done sooner. - Remove deprecated drm_obj_ref/unref functions. All drivers use get/put now. - Decrease stack use of drm_gem_prime_mmap. - Improve documentation for dumb callbacks. Driver Changes: - Add edid support to virtio. - Wait on implicit fence in meson and sun4i. - Add support for BGRX8888 to sun4i. - Preparation patches for sun4i driver to start supporting linear and tiled YUV formats. - Add support for HDMI 1.4 4k modes to meson, and support for VIC alternate timings. - Drop custom dumb_map in vkms. - Small fixes and cleanups to v3d. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/151a3270-b1be-ed75-bd58-6b29d741f592@linux.intel.com
2018-11-29Merge tag 'drm-intel-next-2018-11-22' of ↵Dave Airlie6-9/+351
git://anongit.freedesktop.org/drm/drm-intel into drm-next Changes outside i915: - Connector property to limit max bpc (Radhakrishna) - Fix LPE audio runtime PM and deinit (Ville) - DP FEC prep work (Anusha) - Mark pinned shmemfs pages as unevictable (Kuo-Hsin) - Backmerge drm-next (Jani) Inside i915: - Revert OA UAPI change that lacks userspace (Joonas) - Register macro cleanup (Jani) - 32-bit build fixes on pin flags (Chris) - Fix MG DP mode and PHY gating for HDMI (Imre) - DP MST race, hpd and irq fixes (Lyude) - Combo PHY fixes and cleanup (Imre, Lucas) - Move display init and cleanup under modeset init and cleanup (José) - PSR fixes (José) - Subslice size fixes (Daniele) - Abstract and clean up fixed point helpers (Jani) - Plane input CSC for YUV to RGB conversion (Uma) - Break long iterations for get/put shmemfs pages (Chris) - Improve DDI encoder hw state readout sanity checks (Imre) - Fix power well leaks for MST (José) - Scaler fixes (Ville) - Watermark fixes (Ville) - Fix VLV/CHV DSI panel orientation readout (Ville) - ICL rawclock fixes (Paulo) - Workaround DMC power well request issues (Imre) - Plane allocation fix (Maarten) - Transcoder enum value/ordering robustness fixes (Imre) - UTS_RELEASE build dependency fix (Hans Holmberg) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87k1l4cesj.fsf@intel.com
2018-11-27drm/v3d: Fix whitespace inconsistency in the header.Eric Anholt1-2/+2
Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-2-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-27drm: Improve dumb callback docsDaniel Vetter1-2/+7
Noticed while reviewing a patch from Eric. Also add a todo for the dumb_map_offset callbacks (it should be simple to do, but piles of work). Plus fix up vbox, because vbox. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Fabio Rafael da Rosa <fdr@pid42.net> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181127091921.8325-1-daniel.vetter@ffwll.ch
2018-11-25Merge tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+1
Pull dma-mapping fixes from Christoph Hellwig: "Two dma-direct / swiotlb regressions fixes: - zero is a valid physical address on some arm boards, we can't use it as the error value - don't try to cache flush the error return value (no matter what it is)" * tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: Skip cache maintenance on map error dma-direct: Make DIRECT_MAPPING_ERROR viable for SWIOTLB
2018-11-25Merge tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds1-64/+203
Pull XArray updates from Matthew Wilcox: "We found some bugs in the DAX conversion to XArray (and one bug which predated the XArray conversion). There were a couple of bugs in some of the higher-level functions, which aren't actually being called in today's kernel, but surfaced as a result of converting existing radix tree & IDR users over to the XArray. Some of the other changes to how the higher-level APIs work were also motivated by converting various users; again, they're not in use in today's kernel, so changing them has a low probability of introducing a bug. Dan can still trigger a bug in the DAX code with hot-offline/online, and we're working on tracking that down" * tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-dax: XArray tests: Add missing locking dax: Avoid losing wakeup in dax_lock_mapping_entry dax: Fix huge page faults dax: Fix dax_unlock_mapping_entry for PMD pages dax: Reinstate RCU protection of inode dax: Make sure the unlocking entry isn't locked dax: Remove optimisation from dax_lock_mapping_entry XArray tests: Correct some 64-bit assumptions XArray: Correct xa_store_range XArray: Fix Documentation XArray: Handle NULL pointers differently for allocation XArray: Unify xa_store and __xa_store XArray: Add xa_store_bh() and xa_store_irq() XArray: Turn xa_erase into an exported function XArray: Unify xa_cmpxchg and __xa_cmpxchg XArray: Regularise xa_reserve nilfs2: Use xa_erase_irq XArray: Export __xa_foo to non-GPL modules XArray: Fix xa_for_each with a single element at 0
2018-11-25drm: remove deprecated "drm_framebuffer_[un]reference" functionsFernando Ramos1-24/+0
There are no more places where this (deprecated) function is being used from, thus it can now be removed. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-8-greenfoo@gluegarage.com
2018-11-25drm: remove deprecated "drm_connector_[un]reference" functionsFernando Ramos1-24/+0
There are no more places where this (deprecated) function is being used from, thus it can now be removed. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-7-greenfoo@gluegarage.com
2018-11-25drm: remove deprecated "drm_dev_unref" functionFernando Ramos1-1/+0
There are no more places where this (deprecated) function is being used from, thus it can now be removed. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-5-greenfoo@gluegarage.com
2018-11-25drm: remove deprecated "[__]drm_gem_object_[un]reference[_locked]" functionsFernando Ramos1-50/+0
There are no more places where these (deprecated) functions are being used from, thus they can now be removed. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-3-greenfoo@gluegarage.com
2018-11-24Merge branch 'for-linus' of ↵Linus Torvalds2-38/+0
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - revert of the high-resolution scrolling feature, as it breaks certain hardware due to incompatibilities between Logitech and Microsoft worlds. Peter Hutterer is working on a fixed implementation. Until that is finished, revert by Benjamin Tissoires. - revert of incorrect strncpy->strlcpy conversion in uhid, from David Herrmann - fix for buggy sendfile() implementation on uhid device node, from Eric Biggers - a few assorted device-ID specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: Revert "Input: Add the `REL_WHEEL_HI_RES` event code" Revert "HID: input: Create a utility class for counting scroll events" Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration"" Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice" Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice" Revert "HID: logitech: fix a used uninitialized GCC warning" Revert "HID: input: simplify/fix high-res scroll event handling" HID: Add quirk for Primax PIXART OEM mice HID: i2c-hid: Disable runtime PM for LG touchscreen HID: multitouch: Add pointstick support for Cirque Touchpad HID: steam: remove input device when a hid client is running. Revert "HID: uhid: use strlcpy() instead of strncpy()" HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges HID: input: Ignore battery reported by Symbol DS4308 HID: Add quirk for Microsoft PIXART OEM mouse
2018-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-1/+32
Pull networking fixes from David Miller: 1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter. 2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann. 3) Fix socket wmem accounting in SCTP, from Xin Long. 4) Fix failed resume crash in ena driver, from Arthur Kiyanovski. 5) qed driver passes bytes instead of bits into second arg of bitmap_weight(). From Denis Bolotin. 6) Fix reset deadlock in ibmvnic, from Juliet Kim. 7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr Machata. 8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK compression during this period, from Eric Dumazet. 9) Add atomicity to SMC protocol cursor handling, from Ursula Braun. 10) Don't leave dangling error pointer if bpf_prog_add() fails in thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO headers, set sq->tso_hdrs to NULL. 11) Fix race condition over state variables in act_police, from Davide Caratti. 12) Disable guest csum in the presence of XDP in virtio_net, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits) net: gemini: Fix copy/paste error net: phy: mscc: fix deadlock in vsc85xx_default_config dt-bindings: dsa: Fix typo in "probed" net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue net: amd: add missing of_node_put() team: no need to do team_notify_peers or team_mcast_rejoin when disabling port virtio-net: fail XDP set if guest csum is negotiated virtio-net: disable guest csum during XDP set net/sched: act_police: add missing spinlock initialization net: don't keep lonely packets forever in the gro hash net/ipv6: re-do dad when interface has IFF_NOARP flag change packet: copy user buffers before orphan or clone ibmvnic: Update driver queues after change in ring size support ibmvnic: Fix RX queue buffer cleanup net: thunderx: set xdp_prog to NULL if bpf_prog_add fails net/dim: Update DIM start sample after each DIM iteration net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts net/smc: use after free fix in smc_wr_tx_put_slot() net/smc: atomic SMCD cursor handling net/smc: add SMC-D shutdown signal ...
2018-11-23packet: copy user buffers before orphan or cloneWillem de Bruijn1-1/+17
tpacket_snd sends packets with user pages linked into skb frags. It notifies that pages can be reused when the skb is released by setting skb->destructor to tpacket_destruct_skb. This can cause data corruption if the skb is orphaned (e.g., on transmit through veth) or cloned (e.g., on mirror to another psock). Create a kernel-private copy of data in these cases, same as tun/tap zerocopy transmission. Reuse that infrastructure: mark the skb as SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx). Unlike other zerocopy packets, do not set shinfo destructor_arg to struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify when the original skb is released and a timestamp is recorded. Do not change this timestamp behavior. The ubuf_info->callback is not needed anyway, as no zerocopy notification is expected. Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The resulting value is not a valid ubuf_info pointer, nor a valid tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this. The fix relies on features introduced in commit 52267790ef52 ("sock: add MSG_ZEROCOPY"), so can be backported as is only to 4.14. Tested with from `./in_netns.sh ./txring_overwrite` from http://github.com/wdebruij/kerneltools/tests Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Reported-by: Anand H. Krishnan <anandhkrishnan@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22net/dim: Update DIM start sample after each DIM iterationTal Gilboa1-0/+2
On every iteration of net_dim, the algorithm may choose to check for the system state by comparing current data sample with previous data sample. After each of these comparison, regardless of the action taken, the sample used as baseline is needed to be updated. This patch fixes a bug that causes DIM to take wrong decisions, due to never updating the baseline sample for comparison between iterations. This way, DIM always compares current sample with zeros. Although this is a functional fix, it also improves and stabilizes performance as the algorithm works properly now. Performance: Tested single UDP TX stream with pktgen: samples/pktgen/pktgen_sample03_burst_single_flow.sh -i p4p2 -d 1.1.1.1 -m 24:8a:07:88:26:8b -f 3 -b 128 ConnectX-5 100GbE packet rate improved from 15-19Mpps to 19-20Mpps. Also, toggling between profiles is less frequent with the fix. Fixes: 8115b750dbcb ("net/dim: use struct net_dim_sample as arg to net_dim") Signed-off-by: Tal Gilboa <talgi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22Merge tag 'usb-4.20-rc4' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 4.20-rc4. There's the usual xhci and dwc2/3 fixes as well as a few minor other issues resolved for problems that have been reported. Full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdc-acm: add entry for Hiro (Conexant) modem usb: xhci: Prevent bus suspend if a port connect change or polling state is detected usb: core: Fix hub port connection events lost usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers" usb: dwc2: pci: Fix an error code in probe usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove() xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc usb: xhci: fix timeout for transition from RExit to U0 usb: xhci: fix uninitialized completion when USB3 port got wrong status xhci: Add check for invalid byte size error when UAS devices are connected. xhci: handle port status events for removed USB3 hcd xhci: Fix leaking USB3 shared_hcd at xhci removal USB: misc: appledisplay: add 20" Apple Cinema Display USB: quirks: Add no-lpm quirk for Raydium touchscreens usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub usb: dwc3: gadget: Properly check last unaligned/zero chain TRB usb: dwc3: core: Clean up ULPI device
2018-11-22Revert "Input: Add the `REL_WHEEL_HI_RES` event code"Benjamin Tissoires1-10/+0
This reverts commit aaf9978c3c0291ef3beaa97610bc9c3084656a85. Quoting Peter: There is a HID feature report called "Resolution Multiplier" Described in the "Enhanced Wheel Support in Windows" doc and the "USB HID Usage Tables" page 30. http://download.microsoft.com/download/b/d/1/bd1f7ef4-7d72-419e-bc5c-9f79ad7bb66e/wheel.docx https://www.usb.org/sites/default/files/documents/hut1_12v2.pdf This was new for Windows Vista, so we're only a decade behind here. I only accidentally found this a few days ago while debugging a stuck button on a Microsoft mouse. The docs above describe it like this: a wheel control by default sends value 1 per notch. If the resolution multiplier is active, the wheel is expected to send a value of $multiplier per notch (e.g. MS Sculpt mouse) or just send events more often, i.e. for less physical motion (e.g. MS Comfort mouse). For the latter, you need the right HW of course. The Sculpt mouse has tactile wheel clicks, so nothing really changes. The Comfort mouse has continuous motion with no tactile clicks. Similar to the free-wheeling Logitech mice but without any inertia. Note that the doc also says that Vista and onwards *always* enable this feature where available. An example HID definition looks like this: Usage Page Generic Desktop (0x01) Usage Resolution Multiplier (0x48) Logical Minimum 0 Logical Maximum 1 Physical Minimum 1 Physical Maximum 16 Report Size 2 # in bits Report Count 1 Feature (Data, Var, Abs) So the actual bits have values 0 or 1 and that reflects real values 1 or 16. We've only seen single-bits so far, so there's low-res and hi-res, but nothing in between. The multiplier is available for HID usages "Wheel" and "AC Pan" (horiz wheel). Microsoft suggests that > Vendors should ship their devices with smooth scrolling disabled and allow > Windows to enable it. This ensures that the device works like a regular HID > device on legacy operating systems that do not support smooth scrolling. (see the wheel doc linked above) The mice that we tested so far do reset on unplug. Device Support looks to be all (?) Microsoft mice but nothing else Not supported: - Logitech G500s, G303 - Roccat Kone XTD - all the cheap Lenovo, HP, Dell, Logitech USB mice that come with a workstation that I could find don't have it. - Etekcity something something - Razer Imperator Supported: - Microsoft Comfort Optical Mouse 3000 - yes, physical: 1:4 - Microsoft Sculpt Ergonomic Mouse - yes, physical: 1:12 - Microsoft Surface mouse - yes, physical: 1:4 So again, I think this is really just available on Microsoft mice, but probably all decent MS mice released over the last decade. Looking at the hardware itself: - no noticeable notches in the weel - low-res: 18 events per 360deg rotation (click angle 20 deg) - high-res: 72 events per 360deg → matches multiplier of 4 - I can feel the notches during wheel turns - low-res: 24 events per 360 deg rotation (click angle 15 deg) - horiz wheel is tilt-based, continuous output value 1 - high-res: 24 events per 360deg with value 12 → matches multiplier of 12 - horiz wheel output rate doubles/triples?, values is 3 - It's a touch strip, not a wheel so no notches - high-res: events have value 4 instead of 1 a bit strange given that it doesn't actually have notches. Ok, why is this an issue for the current API? First, because the logitech multiplier used in Harry's patches looks suspiciously like the Resolution Multiplier so I think we should assume it's the same thing. Nestor, can you shed some light on that? - `REL_WHEEL` is defined as the number of notches, emulated where needed. - `REL_WHEEL_HI_RES` is the movement of the user's finger in microns. - `WM_MOUSEWHEEL` (Windows) is is a multiple of 120, defined as "the threshold for action to be taken and one such action" https://docs.microsoft.com/en-us/windows/desktop/inputdev/wm-mousewheel If the multiplier is set to M, this means we need an accumulated value of M until we can claim there was a wheel click. So after enabling the multiplier and setting it to the maximum (like Windows): - M units are 15deg rotation → 1 unit is 2620/M micron (see below). This is the `REL_WHEEL_HI_RES` value. - wheel diameter 20mm: 15 deg rotation is 2.62mm, 2620 micron (pi * 20mm / (360deg/15deg)) - For every M units accumulated, send one `REL_WHEEL` event The problem here is that we've now hardcoded 20mm/15 deg into the kernel and we have no way of getting the size of the wheel or the click angle into the kernel. In userspace we now have to undo the kernel's calculation. If our click angle is e.g. 20 degree we have to undo the (lossy) calculation from the kernel and calculate the correct angle instead. This also means the 15 is a hardcoded option forever and cannot be changed. In hid-logitech-hidpp.c, the microns per unit is hardcoded per device. Harry, did you measure those by hand? We'd need to update the kernel for every device and there are 10 years worth of devices from MS alone. The multiplier default is 8 which is in the right ballpark, so I'm pretty sure this is the same as the Resolution Multiplier, just in HID++ lingo. And given that the 120 magic factor is what Windows uses in the end, I can't imagine Logitech rolling their own thing here. Nestor? And we're already fairly inaccurate with the microns anyway. The MX Anywhere 2S has a click angle of 20 degrees (18 stops) and a 17mm wheel, so a wheel notch is approximately 2.67mm, one event at multiplier 8 (1/8 of a notch) would be 334 micron. That's only 80% of the fallback value of 406 in the kernel. Multiplier 6 gives us 445micron (10% off). I'm assuming multiplier 7 doesn't exist because it's not a factor of 120. Summary: Best option may be to simply do what Windows is doing, all the HW manufacturers have to use that approach after all. Switch `REL_WHEEL_HI_RES` to report in fractions of 120, with 120 being one notch and divide that by the multiplier for the actual events. So e.g. the Logitech multiplier 8 would send value 15 for each event in hi-res mode. This can be converted in userspace to whatever userspace needs (combined with a hwdb there that tells you wheel size/click angle/...). Conflicts: include/uapi/linux/input-event-codes.h -> I kept the new reserved event in the code, so I had to adapt the revert slightly Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: input: Create a utility class for counting scroll events"Benjamin Tissoires1-28/+0
This reverts commit 1ff2e1a44e02d4bdbb9be67c7d9acc240a67141f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Merge tag 'drm-misc-next-2018-11-21' of ↵Dave Airlie9-71/+212
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 2: UAPI Changes: - Remove syncobj timeline support from drm. Cross-subsystem Changes: - Document canvas provider node in the DT bindings. - Improve documentation for TPO TPG110 DT bindings. Core Changes: - Use explicit state in drm atomic functions. - Add panel quirk for new GPD Win2 firmware. - Add DRM_FORMAT_XYUV8888. - Set the default import/export function in prime to drm_gem_prime_import/export. - Add a separate drm_gem_object_funcs, to stop relying on dev->driver->*gem* functions. - Make sure that tinydrm sets the virtual address also on imported buffers. Driver Changes: - Support active-low data enable signal in sun4i. - Fix scaling in vc4. - Use canvas provider node in meson. - Remove unused variables in sti and qxl and cirrus. - Add overlay plane support and primary plane scaling to meson. - i2c fixes in drm/bridge/sii902x - Fix mailbox read size in rockchip. - Spelling fix in panel/s6d16d0. - Remove unnecessary null check from qxl_bo_unref. - Remove unused arguments from qxl_bo_pin. - Fix qxl cursor pinning. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9c0409e3-a85f-d2af-b4eb-baf1eb8bbae4@linux.intel.com
2018-11-22tcp: defer SACK compression after DupThreshEric Dumazet1-0/+1
Jean-Louis reported a TCP regression and bisected to recent SACK compression. After a loss episode (receiver not able to keep up and dropping packets because its backlog is full), linux TCP stack is sending a single SACK (DUPACK). Sender waits a full RTO timer before recovering losses. While RFC 6675 says in section 5, "Algorithm Details", (2) If DupAcks < DupThresh but IsLost (HighACK + 1) returns true -- indicating at least three segments have arrived above the current cumulative acknowledgment point, which is taken to indicate loss -- go to step (4). ... (4) Invoke fast retransmit and enter loss recovery as follows: there are old TCP stacks not implementing this strategy, and still counting the dupacks before starting fast retransmit. While these stacks probably perform poorly when receivers implement LRO/GRO, we should be a little more gentle to them. This patch makes sure we do not enable SACK compression unless 3 dupacks have been sent since last rcv_nxt update. Ideally we should even rearm the timer to send one or two more DUPACK if no more packets are coming, but that will be work aiming for linux-4.21. Many thanks to Jean-Louis for bisecting the issue, providing packet captures and testing this patch. Fixes: 5d9f4262b7ea ("tcp: add SACK compression") Reported-by: Jean-Louis Dupond <jean-louis@dupond.be> Tested-by: Jean-Louis Dupond <jean-louis@dupond.be> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21dma-direct: Make DIRECT_MAPPING_ERROR viable for SWIOTLBRobin Murphy1-1/+1
With the overflow buffer removed, we no longer have a unique address which is guaranteed not to be a valid DMA target to use as an error token. The DIRECT_MAPPING_ERROR value of 0 tries to at least represent an unlikely DMA target, but unfortunately there are already SWIOTLB users with DMA-able memory at physical address 0 which now gets falsely treated as a mapping failure and leads to all manner of misbehaviour. The best we can do to mitigate that is flip DIRECT_MAPPING_ERROR to the other commonly-used error value of all-bits-set, since the last single byte of memory is by far the least-likely-valid DMA target. Fixes: dff8d6c1ed58 ("swiotlb: remove the overflow buffer") Reported-by: John Stultz <john.stultz@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-11-21virtio-gpu: add VIRTIO_GPU_F_EDID featureGerd Hoffmann1-0/+18
The feature allows the guest request an EDID blob (describing monitor capabilities) for a given scanout (aka virtual monitor connector). It brings a new command message, which has just a scanout field (beside the standard virtio-gpu header) and a response message which carries the EDID data. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181030063206.19528-2-kraxel@redhat.com
2018-11-20Merge tag 'media/v4.20-3' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - add a missing include at v4l2-controls uAPI header - minor kAPI update for the request API - some fixes at CEC core - use a lower minimum height for the virtual codec driver - cleanup a gcc warning due to the lack of a fall though markup - tc358743: Remove unnecessary self assignment - fix the V4L event subscription logic - docs: Document metadata format in struct v4l2_format - omap3isp and ipu3-cio2: fix unbinding logic * tag 'media/v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: ipu3-cio2: Use cio2_queues_exit media: ipu3-cio2: Unregister device nodes first, then release resources media: omap3isp: Unregister media device as first media: docs: Document metadata format in struct v4l2_format media: v4l: event: Add subscription to list before calling "add" operation media: dm365_ipipeif: better annotate a fall though media: Rename vb2_m2m_request_queue -> v4l2_m2m_request_queue media: cec: increase debug level for 'queue full' media: cec: check for non-OK/NACK conditions while claiming a LA media: vicodec: lower minimum height to 360 media: tc358743: Remove unnecessary self assignment media: v4l: fix uapi mpeg slice params definition v4l2-controls: add a missing include
2018-11-20drm: Introduce new DRM_FORMAT_XYUVStanislav Lisovskiy1-0/+1
v5: This is YUV444 packed format same as AYUV, but without alpha, as supported by i915. v6: Removed unneeded initializer for new XYUV format. v7: Added is_yuv field initialization according to latest drm_fourcc format structure initialization changes. v8: Edited commit message to be more clear about skl+, renamed PLANE_CTL_FORMAT_AYUV to PLANE_CTL_FORMAT_XYUV as this format doesn't support per-pixel alpha. Fixed minor code issues. v9: Moved DRM format check to proper place in intel_framebuffer_init. v10: Changed DRM_FORMAT_XYUV to be DRM_FORMAT_XYUV8888 v11: Fixed rebase conflict, caused by added new formats to drm-tip meanwhile. Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> [vsyrjala: Removed stray tab and sorted the formats differently] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181109093916.25858-2-stanislav.lisovskiy@intel.com
2018-11-20drm/tinydrm: Use DRM_GEM_CMA_VMAP_DRIVER_OPSNoralf Trønnes1-28/+7
The CMA helper now has the functionality to ensure a virtual address on imported buffer so use that. While touching all tinydrm drivers, remove the unnecessary inclusion of drm_fb_helper.h in some drivers. Cc: David Lechner <david@lechnology.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181110145647.17580-6-noralf@tronnes.org
2018-11-20drm/cma-helper: Add DRM_GEM_CMA_VMAP_DRIVER_OPSNoralf Trønnes1-0/+24
This adds functionality to the CMA helper which ensures that the kernel virtual address is set on the CMA GEM object also for imported buffers. The drivers have been audited to ensure that none set ->vaddr on imported buffers, making the conditional dma_buf_vunmap() call in drm_gem_cma_free_object() safe. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181110145647.17580-5-noralf@tronnes.org
2018-11-20drm/gem: Add drm_gem_object_funcsNoralf Trønnes1-0/+131
This adds an optional function table on GEM objects. The main benefit is for drivers that support more than one type of memory (shmem,vram,cma) for their buffers depending on the hardware it runs on. With the callbacks attached to the GEM object itself, it is easier to have core helpers for the the various buffer types. The driver only has to make the decision about buffer type on GEM object creation and all other callbacks can be handled by the chosen helper. drm_driver->gem_prime_res_obj has not been added since there's a todo to put a reservation_object into drm_gem_object. v3: Add todo entry v2: Drop drm_gem_object_funcs->prime_mmap in favour of drm_gem_prime_mmap() (Daniel Vetter) v1: - drm_gem_object_funcs.map -> .prime_map let it only do PRIME mmap like the function it superseeds (Daniel Vetter) - Flip around the if ladders and make obj->funcs the first choice highlighting the fact that this the new default way of doing it (Daniel Vetter) Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110145647.17580-4-noralf@tronnes.org
2018-11-20drm/prime: Add drm_gem_prime_mmap()Noralf Trønnes1-0/+1
Add a generic PRIME GEM mmap function. v2: Fix link in docs (Daniel Vetter) Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110145647.17580-3-noralf@tronnes.org
2018-11-20drm/driver: Add defaults for .gem_prime_export/import callbacksNoralf Trønnes1-0/+4
The majority of drivers use drm_gem_prime_export() and drm_gem_prime_import() for these callbacks so let's make them the default. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110145647.17580-2-noralf@tronnes.org
2018-11-20Merge drm/drm-next into drm-intel-next-queuedJani Nikula685-6433/+18902
Pull in v4.20-rc3 via drm-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-19Revert "sctp: remove sctp_transport_pmtu_check"Xin Long1-0/+12
This reverts commit 22d7be267eaa8114dcc28d66c1c347f667d7878a. The dst's mtu in transport can be updated by a non sctp place like in xfrm where the MTU information didn't get synced between asoc, transport and dst, so it is still needed to do the pmtu check in sctp_packet_config. Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-2/+11
Pull networking fixes from David Miller: 1) Fix some potentially uninitialized variables and use-after-free in kvaser_usb can drier, from Jimmy Assarsson. 2) Fix leaks in qed driver, from Denis Bolotin. 3) Socket leak in l2tp, from Xin Long. 4) RSS context allocation fix in bnxt_en from Michael Chan. 5) Fix cxgb4 build errors, from Ganesh Goudar. 6) Route leaks in ipv6 when removing exceptions, from Xin Long. 7) Memory leak in IDR allocation handling of act_pedit, from Davide Caratti. 8) Use-after-free of bridge vlan stats, from Nikolay Aleksandrov. 9) When MTU is locked, do not force DF bit on ipv4 tunnels. From Sabrina Dubroca. 10) When NAPI cached skb is reused, we must set it to the proper initial state which includes skb->pkt_type. From Eric Dumazet. 11) Lockdep and non-linear SKB handling fix in tipc from Jon Maloy. 12) Set RX queue properly in various tuntap receive paths, from Matthew Cover. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) tuntap: fix multiqueue rx ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF tipc: don't assume linear buffer when reading ancillary data tipc: fix lockdep warning when reinitilaizing sockets net-gro: reset skb->pkt_type in napi_reuse_skb() tc-testing: tdc.py: Guard against lack of returncode in executed command tc-testing: tdc.py: ignore errors when decoding stdout/stderr ip_tunnel: don't force DF when MTU is locked MAINTAINERS: Add entry for CAKE qdisc net: bridge: fix vlan stats use-after-free on destruction socket: do a generic_file_splice_read when proto_ops has no splice_read net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs" net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs net/sched: act_pedit: fix memory leak when IDR allocation fails net: lantiq: Fix returned value in case of error in 'xrx200_probe()' ipv6: fix a dst leak when removing its exception net: mvneta: Don't advertise 2.5G modes drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo net/mlx4: Fix UBSAN warning of signed integer overflow ...
2018-11-19Revert "drm/i915/perf: add a parameter to control the size of OA buffer"Joonas Lahtinen1-7/+0
Userspace portion is still missing. This reverts commit cd956bfcd0f58d20485ac0a785415f7d9327a95f. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181116135510.13807-1-joonas.lahtinen@linux.intel.com
2018-11-19Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie6-74/+18
into drm-next New features for 4.21: amdgpu: - Support for SDMA paging queue on vega - Put compute EOP buffers into vram for better performance - Share more code with amdkfd - Support for scanout with DCC on gfx9 - Initial kerneldoc for DC - Updated SMU firmware support for gfx8 chips - Rework CSA handling for eventual support for preemption - XGMI PSP support - Clean up RLC handling - Enable GPU reset by default on VI, SOC15 dGPUs - Ring and IB test cleanups amdkfd: - Share more code with amdgpu ttm: - Move global init out of the drivers scheduler: - Track if schedulers are ready for work - Timeout/fault handling changes to facilitate GPU recovery Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114165113.3751-1-alexander.deucher@amd.com
2018-11-19Merge tag 'drm-misc-next-2018-11-07' of ↵Dave Airlie26-169/+316
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 1: UAPI Changes: - Add syncobj timeline support to drm. Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi. Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem. Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
2018-11-18Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Misc fixes: two warning splat fixes, a leak fix and persistent memory allocation fixes for ARM" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Permit calling efi_mem_reserve_persistent() from atomic context efi/arm: Defer persistent reservations until after paging_init() efi/arm/libstub: Pack FDT after populating it efi/arm: Revert deferred unmap of early memmap mapping efi: Fix debugobjects warning on 'efi_rts_work'
2018-11-16Merge tag 'for-linus-20181115' of git://git.kernel.dk/linux-blockLinus Torvalds1-4/+4
Pull block fixes from Jens Axboe: - Discard loop fix, caused by integer overflow (Dave) - Blacklist of Samsung drive that hangs with power management (Diego) - Copy bio priority when cloning it (Hannes) - Fix race condition exposed in floppy (me) - Fix SCSI queue cleanup regression. While elusive, it caused oopses in queue running (Ming) - Fix bad string copy in kyber tracing (Omar) * tag 'for-linus-20181115' of git://git.kernel.dk/linux-block: SCSI: fix queue cleanup race before queue initialization is done block: fix 32 bit overflow in __blkdev_issue_discard() libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD block: copy ioprio in __bio_clone_fast() and bounce kyber: fix wrong strlcpy() size in trace_kyber_latency() floppy: fix race condition in __floppy_read_block_0()
2018-11-15rxrpc: Fix life checkDavid Howells2-1/+4
The life-checking function, which is used by kAFS to make sure that a call is still live in the event of a pending signal, only samples the received packet serial number counter; it doesn't actually provoke a change in the counter, rather relying on the server to happen to give us a packet in the time window. Fix this by adding a function to force a ping to be transmitted. kAFS then keeps track of whether there's been a stall, and if so, uses the new function to ping the server, resetting the timeout to allow the reply to come back. If there's a stall, a ping and the call is *still* stalled in the same place after another period, then the call will be aborted. Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Fixes: f4d15fb6f99a ("rxrpc: Provide functions for allowing cleaner handling of signals") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15efi/arm: Defer persistent reservations until after paging_init()Ard Biesheuvel1-0/+7
The new memory EFI reservation feature we introduced to allow memory reservations to persist across kexec may trigger an unbounded number of calls to memblock_reserve(). The memblock subsystem can deal with this fine, but not before memblock resizing is enabled, which we can only do after paging_init(), when the memory we reallocate the array into is actually mapped. So break out the memreserve table processing into a separate routine and call it after paging_init() on arm64. On ARM, because of limited reviewing bandwidth of the maintainer, we cannot currently fix this, so instead, disable the EFI persistent memreserve entirely on ARM so we can fix it later. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181114175544.12860-5-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-14drm/virtio: add in/out fence support for explicit synchronizationRobert Foss1-1/+1
When the execbuf call receives an in-fence it will get the dma_fence related to that fence fd and wait on it before submitting the draw call. On the out-fence side we get fence returned by the submitted draw call and attach it to a sync_file and send the sync_file fd to userspace. On error -1 is returned to userspace. VIRTGPU_EXECBUF_FENCE_FD_IN & VIRTGPU_EXECBUF_FENCE_FD_OUT are supported at the simultaneously and can be flagged for simultaneously. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-4-robert.foss@collabora.com Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14drm/virtio: add uapi for in and out explicit fencesRobert Foss1-3/+10
Add a new field called fence_fd that will be used by userspace to send in-fences to the kernel and receive out-fences created by the kernel. This uapi enables virtio to take advantage of explicit synchronization of dma-bufs. There are two new flags: * VIRTGPU_EXECBUF_FENCE_FD_IN to be used when passing an in-fence fd. * VIRTGPU_EXECBUF_FENCE_FD_OUT to be used when requesting an out-fence fd The execbuffer IOCTL is now read-write to allow the userspace to read the out-fence. On error -1 should be returned in the fence_fd field. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-3-robert.foss@collabora.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-13Merge tag 'linux-can-fixes-for-4.20-20181109' of ↵David S. Miller2-1/+7
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-11-09 this is a pull request of 20 patches for net/master. First we have a patch by Oliver Hartkopp which changes the raw socket's raw_sendmsg() to return an error value if the user tries to send a CANFD frame to a CAN-2.0 device. The next two patches are by Jimmy Assarsson and fix potential problems in the kvaser_usb driver. YueHaibing's patches for the ucan driver fix a compile time warning and remove a duplicate include. Eugeniu Rosca patch adds more binding documentation to the rcar_can driver bindings. The next two patches are by Fabrizio Castro for the rcar_can driver and fixes a problem in the driver's probe function and document the r8a774a1 binding. Lukas Wunner's patch fixes a recpetion problem in hi311x driver by switching from edge to level triggered interruts. The next three patches all target the flexcan driver. Pankaj Bansal's patch unconditionally unlocks the last mailbox used for RX. Alexander Stein provides a better workaround for a hardware limitation when sending RTR frames, by using the last mailbox for TX, resulting in fewer lost frames. The patch by me simplyfies the driver, by making a runtime value a compile time constant. The following 4 patches are by me and provide the groundwork for the next patches by Oleksij Rempel. To avoid code duplication common code in the common CAN driver infrastructure is factured out and error handling is cleaned up. The next 4 patches are by Oleksij Rempel and fix the problem in the flexcan driver that other processes see TX frames arrive out of order with ragards to a RX'ed frame (which are send by a different system on the CAN bus as the result of our TX frame). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst642-6155/+18505
drm-next is forwarded to v4.20-rc1, and we need this to make a patch series apply. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-11-12kyber: fix wrong strlcpy() size in trace_kyber_latency()Omar Sandoval1-4/+4
When copying to the latency type, we should be passing LATENCY_TYPE_LEN, not DOMAIN_LEN (this isn't a problem in practice because we only pass "total" or "I/O"). Fix it by changing all of the strlcpy() calls to use sizeof(). Fixes: 6c3b7af1c975 ("kyber: add tracepoints") Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch> Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-12drm: Revert syncobj timeline changes.Eric Anholt1-42/+34
Daniel suggested I submit this, since we're still seeing regressions from it. This is a revert to before 48197bc564c7 ("drm: add syncobj timeline support v9") and its followon fixes. Fixes this on first V3D testcase execution: [ 48.767088] ============================================ [ 48.772410] WARNING: possible recursive locking detected [ 48.777739] 4.19.0-rc6+ #489 Not tainted [ 48.781668] -------------------------------------------- [ 48.786993] shader_runner/3284 is trying to acquire lock: [ 48.792408] ce309d7f (&(&array->lock)->rlock){....}, at: dma_fence_add_callback+0x30/0x23c [ 48.800714] [ 48.800714] but task is already holding lock: [ 48.806559] c5952bd3 (&(&array->lock)->rlock){....}, at: dma_fence_add_callback+0x30/0x23c [ 48.814862] [ 48.814862] other info that might help us debug this: [ 48.821410] Possible unsafe locking scenario: [ 48.821410] [ 48.827338] CPU0 [ 48.829788] ---- [ 48.832239] lock(&(&array->lock)->rlock); [ 48.836434] lock(&(&array->lock)->rlock); [ 48.840640] [ 48.840640] *** DEADLOCK *** [ 48.840640] [ 48.846582] May be due to missing lock nesting notation [ 130.763560] 1 lock held by cts-runner/3270: [ 130.767745] #0: 7834b793 (&(&array->lock)->rlock){-...}, at: dma_fence_add_callback+0x30/0x23c [ 130.776461] stack backtrace: [ 130.780825] CPU: 1 PID: 3270 Comm: cts-runner Not tainted 4.19.0-rc6+ #486 [ 130.787706] Hardware name: Broadcom STB (Flattened Device Tree) [ 130.793645] [<c021269c>] (unwind_backtrace) from [<c020db1c>] (show_stack+0x10/0x14) [ 130.801404] [<c020db1c>] (show_stack) from [<c0c2c4b0>] (dump_stack+0xa8/0xd4) [ 130.808642] [<c0c2c4b0>] (dump_stack) from [<c0281a84>] (__lock_acquire+0x848/0x1a68) [ 130.816483] [<c0281a84>] (__lock_acquire) from [<c02835d8>] (lock_acquire+0xd8/0x22c) [ 130.824326] [<c02835d8>] (lock_acquire) from [<c0c49948>] (_raw_spin_lock_irqsave+0x54/0x68) [ 130.832777] [<c0c49948>] (_raw_spin_lock_irqsave) from [<c086bf54>] (dma_fence_add_callback+0x30/0x23c) [ 130.842183] [<c086bf54>] (dma_fence_add_callback) from [<c086d4c8>] (dma_fence_array_enable_signaling+0x58/0xec) [ 130.852371] [<c086d4c8>] (dma_fence_array_enable_signaling) from [<c086c00c>] (dma_fence_add_callback+0xe8/0x23c) [ 130.862647] [<c086c00c>] (dma_fence_add_callback) from [<c06d8774>] (drm_syncobj_wait_ioctl+0x518/0x614) [ 130.872143] [<c06d8774>] (drm_syncobj_wait_ioctl) from [<c06b8458>] (drm_ioctl_kernel+0xb0/0xf0) [ 130.880940] [<c06b8458>] (drm_ioctl_kernel) from [<c06b8818>] (drm_ioctl+0x1d8/0x390) [ 130.888782] [<c06b8818>] (drm_ioctl) from [<c03a4510>] (do_vfs_ioctl+0xb0/0x8ac) [ 130.896187] [<c03a4510>] (do_vfs_ioctl) from [<c03a4d40>] (ksys_ioctl+0x34/0x60) [ 130.903593] [<c03a4d40>] (ksys_ioctl) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/261044/
2018-11-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes: - Cure the LDT remapping to user space on 5 level paging which ended up in the KASLR space - Remove LDT mapping before freeing the LDT pages - Make NFIT MCE handling more robust - Unbreak the VSMP build by removing the dependency on paravirt ops - Support broken PIT emulation on Microsoft hyperV - Don't trace vmware_sched_clock() to avoid tracer recursion - Remove -pipe from KBUILD CFLAGS which breaks clang and is also slower on GCC - Trivial coding style and typo fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/vmware: Do not trace vmware_sched_clock() x86/vsmp: Remove dependency on pv_irq_ops x86/ldt: Remove unused variable in map_ldt_struct() x86/ldt: Unmap PTEs for the slot before freeing LDT pages x86/mm: Move LDT remap out of KASLR region on 5-level paging acpi/nfit, x86/mce: Validate a MCE's address before using it acpi/nfit, x86/mce: Handle only uncorrectable machine checks x86/build: Remove -pipe from KBUILD_CFLAGS x86/hyper-v: Fix indentation in hv_do_fast_hypercall16() Documentation/x86: Fix typo in zero-page.txt x86/hyper-v: Enable PIT shutdown quirk clockevents/drivers/i8253: Add support for PIT shutdown quirk
2018-11-12Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: "A couple of fixlets for the core: - Kernel doc function documentation fixes - Missing prototypes for weak watchdog functions" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: resource/docs: Complete kernel-doc style function documentation watchdog/core: Add missing prototypes for weak functions resource/docs: Fix new kernel-doc warnings
2018-11-10Merge tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-9/+9
Pull drm fixes from Dave Airlie: "drm: i915, amdgpu, sun4i, exynos and etnaviv fixes: - amdgpu has some display fixes, KFD ioctl fixes and a Vega20 bios interaction fix. - sun4i has some NULL checks added - i915 has a 32-bit system fix, LPE audio oops, and HDMI2.0 clock fixes. - Exynos has a 3 regression fixes (one frame counter, fbdev missing, dsi->panel check) - Etnaviv has a single fencing fix for GPU recovery" * tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drm: (39 commits) drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder() drm/amd/display: Drop reusing drm connector for MST drm/amd/display: Cleanup MST non-atomic code workaround drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabled drm/amd/powerplay: set a default fclk/gfxclk ratio drm/amdgpu/display/dce11: only enable FBC when selected drm/amdgpu/display/dm: handle FBC dc feature parameter drm/amdgpu/display/dc: add FBC to dc_config drm/amdgpu: add DC feature mask module parameter drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2) drm/amdgpu/vega20: add CLK base offset drm/amd/display: Stop leaking planes drm/amd/display: Fix misleading buffer information Revert "drm/amd/display: set backlight level limit to 1" drm/amd: Update atom_smu_info_v3_3 structure drm/i915: Fix ilk+ watermarks when disabling pipes drm/sun4i: tcon: prevent tcon->panel dereference if NULL drm/sun4i: tcon: fix check of tcon->panel null pointer drm/i915: Don't oops during modeset shutdown after lpe audio deinit drm/i915: Mark pin flags as u64 ...
2018-11-10Merge tag 'for-linus-4.20a-rc2-tag' of ↵Linus Torvalds1-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Several fixes, mostly for rather recent regressions when running under Xen" * tag 'for-linus-4.20a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: remove size limit of privcmd-buf mapping interface xen: fix xen_qlock_wait() x86/xen: fix pv boot xen-blkfront: fix kernel panic with negotiate_mq error path xen/grant-table: Fix incorrect gnttab_dma_free_pages() pr_debug message CONFIG_XEN_PV breaks xen_create_contiguous_region on ARM
2018-11-10Merge tag 'ceph-for-4.20-rc2' of https://github.com/ceph/ceph-clientLinus Torvalds1-7/+1
Pull Ceph fixes from Ilya Dryomov: "Two CephFS fixes (copy_file_range and quota) and a small feature bit cleanup" * tag 'ceph-for-4.20-rc2' of https://github.com/ceph/ceph-client: libceph: assume argonaut on the server side ceph: quota: fix null pointer dereference in quota check ceph: add destination file data sync before doing any remote copy
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 14:47:50 +0300