summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2014-05-19can: unify identifiers to ensure unique include processingOliver Hartkopp14-42/+42
Armin pointed me to the fact that the identifier which is used to ensure the unique include processing in lunux/include/uapi/linux/can.h is CAN_H. This clashed with his own source as includes from libraries and APIs should use an underscore '_' at the identifier start. This patch fixes the protection identifiers in all CAN relavant includes. Reported-by: Armin Burchardt <armin@uni-bremen.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-05-19can: add Renesas R-Car CAN driverSergei Shtylyov1-0/+17
Add support for the CAN controller found in Renesas R-Car SoCs. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-05-17net: cdc_ncm: remove redundant "disconnected" flagBjørn Mork1-1/+0
Calling netif_carrier_{on,off} is sufficient. There is no need to duplicate the carrier state in a driver specific flag. Acked-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: cdc_ncm: use sane defaults for rx/tx buffersBjørn Mork1-0/+4
Lots of devices request much larger buffers than reasonable. This cause real problems for users of hosts with limited resources. Reducing the default buffer size to 16kB for such devices is a reasonable trade-off between allowing them to aggregate traffic and avoiding memory exhaustion on resource restrained hosts. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: cdc_ncm/cdc_mbim: adding NCM protocol statisticsBjørn Mork1-0/+11
To have an idea of the effects of the protocol coalescing it's useful to have some counters showing the different aspects. Due to the asymmetrical usbnet interface the netdev rx_bytes counter has been counting real received payload, while the tx_bytes counter has included the NCM/MBIM framing overhead. This overhead can be many times the payload because of the aggressive padding strategy of this driver, and will vary a lot depending on device and traffic. With very few exceptions, users are only interested in the payload size. Having an somewhat accurate payload byte counter is particularly important for mobile broadband devices, which many NCM devices and of course all MBIM devices are. Users and userspace applications will use this counter to monitor account quotas. Having protocol specific counters for the overhead, we are now able to correct the tx_bytes netdev counter so that it shows the real payload Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: cdc_ncm: set reasonable padding limitsBjørn Mork1-0/+1
We pad frames larger than X to maximum size for devices which don't need a ZLP after maximum sized frames. This allows the device to optimize its transfers for one fixed buffer size. X was arbitrarily set at 512 bytes regardless of real buffer maximum, causing extreme overheads due to excessive padding of larger tx buffers. Limit the padding to at most 3 full USB packets, still allowing the overhead to payload ratio of 3/1. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: cdc_ncm: use true max dgram count for header estimatesBjørn Mork1-9/+1
Many newer NCM and MBIM devices will request a maximum tx datagram count which is much smaller than our hard-coded absolute max. We can reduce the overhead without sacrificing any of the simplicity for these devices, by simply using the true negotiated count in when calculated the maximum NTH and NDP header sizes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: cdc_ncm: use ethtool to tune coalescing settingsBjørn Mork1-1/+5
Datagram coalescing is an integral part of the NCM and MBIM protocols, intended to reduce the interrupt load primarily on the device end of the USB link. As with all coalescing solutions, there is a trade-off between buffering and interrupts. The current defaults are based on the assumption that device side buffers should be the limiting factor. However, many modern high speed LTE modems suffers from buffer-bloat, making this assumption fail. This results in sub-optimal performance due to excessive coalescing. And in cases where such modems are connected to cheap embedded hosts there is often severe buffer allocation issues, giving very noticeable performance degradation . A start on improving this is going from build time hard coded limits to per device user configurable limits. The ethtool coalescing API was selected as user interface because, although the tuned values are buffer sizes, these settings directly control datagram coalescing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17ieee802154, mac802154: implement devkey record optionPhoebe Buckheister1-0/+1
The 802.15.4-2011 standard states that for each key, a list of devices that use this key shall be kept. Previous patches have only considered two options: * a device "uses" (or may use) all keys, rendering the list useless * a device is restricted to a certain set of keys Another option would be that a device *may* use all keys, but need not do so, and we are interested in the actual set of keys the device uses. Recording keys used by any given device may have a noticable performance impact and might not be needed as often. The common case, in which a device will not switch keys too often, should still perform well. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17ieee802154: add netlink interfaces for llsecPhoebe Buckheister1-0/+31
This patch adds user-visible interfaces for the llsec infrastructure. For the added methods, the only major difference between all add/remove implementation lies in how the specific object is parsed, and for dump requests, how objects are written into netlink messages. To save on boilerplate code, table dumps are routed through a helper function that handles netlink dump state, leaving the actual dumping code to care only about iterating over the table to be dumped and filling netlink messages. For add/remove methods, the boilerplate required to work is not quite as large, but still enough to also move into a local helper. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17mac802154: add llsec configuration functionsPhoebe Buckheister1-0/+36
Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17ieee802154: add dgram sockopts for security controlPhoebe Buckheister1-1/+9
Allow datagram sockets to override the security settings of the device they send from on a per-socket basis. Requires CAP_NET_ADMIN or CAP_NET_RAW, since raw sockets can send arbitrary packets anyway. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17mac802154: integrate llsec with wpan devicesPhoebe Buckheister1-0/+3
Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17ieee802154: add types for link-layer securityPhoebe Buckheister1-0/+95
The added structures match 802.15.4-2011 link-layer security PIBs as closely as is reasonable. Some lists required by the standard were modeled as bitmaps (frame_types and command_frame_ids in *llsec_key, 802.15.4-2011 7.5/Table 61), since using lists for those seems a bit excessive and not particularly useful. The DeviceDescriptorHandleList was inverted and is here a per-device list, since operations on this list are likely to have both a key and a device at hand, and per-device lists of keys are shorter than per-key lists of devices. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17of: provide a binding for fixed link PHYsThomas Petazzoni1-0/+15
Some Ethernet MACs have a "fixed link", and are not connected to a normal MDIO-managed PHY device. For those situations, a Device Tree binding allows to describe a "fixed link" using a special PHY node. This patch adds: * A documentation for the fixed PHY Device Tree binding. * An of_phy_is_fixed_link() function that an Ethernet driver can call on its PHY phandle to find out whether it's a fixed link PHY or not. It should typically be used to know if of_phy_register_fixed_link() should be called. * An of_phy_register_fixed_link() function that instantiates the fixed PHY into the PHY subsystem, so that when the driver calls of_phy_connect(), the PHY device associated to the OF node will be found. These two additional functions also support the old fixed-link Device Tree binding used on PowerPC platforms, so that ultimately, the network device drivers for those platforms could be converted to use of_phy_is_fixed_link() and of_phy_register_fixed_link() instead of of_phy_connect_fixed_link(), while keeping compatibility with their respective Device Tree bindings. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: phy: extend fixed driver with fixed_phy_register()Thomas Petazzoni1-0/+11
The existing fixed_phy_add() function has several drawbacks that prevents it from being used as is for OF-based declaration of fixed PHYs: * The address of the PHY on the fake bus needs to be passed, while a dynamic allocation is desired. * Since the phy_device instantiation is post-poned until the next mdiobus scan, there is no way to associate the fixed PHY with its OF node, which later prevents of_phy_connect() from finding this fixed PHY from a given OF node. To solve this, this commit introduces fixed_phy_register(), which will allocate an available PHY address, add the PHY using fixed_phy_add() and instantiate the phy_device structure associated with the provided OF node. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16net: filter: x86: internal BPF JITAlexei Starovoitov1-0/+3
Maps all internal BPF instructions into x86_64 instructions. This patch replaces original BPF x64 JIT with internal BPF x64 JIT. sysctl net.core.bpf_jit_enable is reused as on/off switch. Performance: 1. old BPF JIT and internal BPF JIT generate equivalent x86_64 code. No performance difference is observed for filters that were JIT-able before Example assembler code for BPF filter "tcpdump port 22" original BPF -> old JIT: original BPF -> internal BPF -> new JIT: 0: push %rbp 0: push %rbp 1: mov %rsp,%rbp 1: mov %rsp,%rbp 4: sub $0x60,%rsp 4: sub $0x228,%rsp 8: mov %rbx,-0x8(%rbp) b: mov %rbx,-0x228(%rbp) // prologue 12: mov %r13,-0x220(%rbp) 19: mov %r14,-0x218(%rbp) 20: mov %r15,-0x210(%rbp) 27: xor %eax,%eax // clear A c: xor %ebx,%ebx 29: xor %r13,%r13 // clear X e: mov 0x68(%rdi),%r9d 2c: mov 0x68(%rdi),%r9d 12: sub 0x6c(%rdi),%r9d 30: sub 0x6c(%rdi),%r9d 16: mov 0xd8(%rdi),%r8 34: mov 0xd8(%rdi),%r10 3b: mov %rdi,%rbx 1d: mov $0xc,%esi 3e: mov $0xc,%esi 22: callq 0xffffffffe1021e15 43: callq 0xffffffffe102bd75 27: cmp $0x86dd,%eax 48: cmp $0x86dd,%rax 2c: jne 0x0000000000000069 4f: jne 0x000000000000009a 2e: mov $0x14,%esi 51: mov $0x14,%esi 33: callq 0xffffffffe1021e31 56: callq 0xffffffffe102bd91 38: cmp $0x84,%eax 5b: cmp $0x84,%rax 3d: je 0x0000000000000049 62: je 0x0000000000000074 3f: cmp $0x6,%eax 64: cmp $0x6,%rax 42: je 0x0000000000000049 68: je 0x0000000000000074 44: cmp $0x11,%eax 6a: cmp $0x11,%rax 47: jne 0x00000000000000c6 6e: jne 0x0000000000000117 49: mov $0x36,%esi 74: mov $0x36,%esi 4e: callq 0xffffffffe1021e15 79: callq 0xffffffffe102bd75 53: cmp $0x16,%eax 7e: cmp $0x16,%rax 56: je 0x00000000000000bf 82: je 0x0000000000000110 58: mov $0x38,%esi 88: mov $0x38,%esi 5d: callq 0xffffffffe1021e15 8d: callq 0xffffffffe102bd75 62: cmp $0x16,%eax 92: cmp $0x16,%rax 65: je 0x00000000000000bf 96: je 0x0000000000000110 67: jmp 0x00000000000000c6 98: jmp 0x0000000000000117 69: cmp $0x800,%eax 9a: cmp $0x800,%rax 6e: jne 0x00000000000000c6 a1: jne 0x0000000000000117 70: mov $0x17,%esi a3: mov $0x17,%esi 75: callq 0xffffffffe1021e31 a8: callq 0xffffffffe102bd91 7a: cmp $0x84,%eax ad: cmp $0x84,%rax 7f: je 0x000000000000008b b4: je 0x00000000000000c2 81: cmp $0x6,%eax b6: cmp $0x6,%rax 84: je 0x000000000000008b ba: je 0x00000000000000c2 86: cmp $0x11,%eax bc: cmp $0x11,%rax 89: jne 0x00000000000000c6 c0: jne 0x0000000000000117 8b: mov $0x14,%esi c2: mov $0x14,%esi 90: callq 0xffffffffe1021e15 c7: callq 0xffffffffe102bd75 95: test $0x1fff,%ax cc: test $0x1fff,%rax 99: jne 0x00000000000000c6 d3: jne 0x0000000000000117 d5: mov %rax,%r14 9b: mov $0xe,%esi d8: mov $0xe,%esi a0: callq 0xffffffffe1021e44 dd: callq 0xffffffffe102bd91 // MSH e2: and $0xf,%eax e5: shl $0x2,%eax e8: mov %rax,%r13 eb: mov %r14,%rax ee: mov %r13,%rsi a5: lea 0xe(%rbx),%esi f1: add $0xe,%esi a8: callq 0xffffffffe1021e0d f4: callq 0xffffffffe102bd6d ad: cmp $0x16,%eax f9: cmp $0x16,%rax b0: je 0x00000000000000bf fd: je 0x0000000000000110 ff: mov %r13,%rsi b2: lea 0x10(%rbx),%esi 102: add $0x10,%esi b5: callq 0xffffffffe1021e0d 105: callq 0xffffffffe102bd6d ba: cmp $0x16,%eax 10a: cmp $0x16,%rax bd: jne 0x00000000000000c6 10e: jne 0x0000000000000117 bf: mov $0xffff,%eax 110: mov $0xffff,%eax c4: jmp 0x00000000000000c8 115: jmp 0x000000000000011c c6: xor %eax,%eax 117: mov $0x0,%eax c8: mov -0x8(%rbp),%rbx 11c: mov -0x228(%rbp),%rbx // epilogue cc: leaveq 123: mov -0x220(%rbp),%r13 cd: retq 12a: mov -0x218(%rbp),%r14 131: mov -0x210(%rbp),%r15 138: leaveq 139: retq On fully cached SKBs both JITed functions take 12 nsec to execute. BPF interpreter executes the program in 30 nsec. The difference in generated assembler is due to the following: Old BPF imlements LDX_MSH instruction via sk_load_byte_msh() helper function inside bpf_jit.S. New JIT removes the helper and does it explicitly, so ldx_msh cost is the same for both JITs, but generated code looks longer. New JIT has 4 registers to save, so prologue/epilogue are larger, but the cost is within noise on x64. Old JIT checks whether first insn clears A and if not emits 'xor %eax,%eax'. New JIT clears %rax unconditionally. 2. old BPF JIT doesn't support ANC_NLATTR, ANC_PAY_OFFSET, ANC_RANDOM extensions. New JIT supports all BPF extensions. Performance of such filters improves 2-4 times depending on a filter. The longer the filter the higher performance gain. Synthetic benchmarks with many ancillary loads see 20x speedup which seems to be the maximum gain from JIT Notes: . net.core.bpf_jit_enable=2 + tools/net/bpf_jit_disasm is still functional and can be used to see generated assembler . there are two jit_compile() functions and code flow for classic filters is: sk_attach_filter() - load classic BPF bpf_jit_compile() - try to JIT from classic BPF sk_convert_filter() - convert classic to internal bpf_int_jit_compile() - JIT from internal BPF seccomp and tracing filters will just call bpf_int_jit_compile() Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15ieee802154: change _cb handling slightlyPhoebe Buckheister1-18/+7
The current mac_cb handling of ieee802154 is rather awkward and limited. Decompose the single flags field into multiple fields with the meanings of each subfield of the flags field to make future extensions (for example, link-layer security) easier. Also don't set the frame sequence number in upper layers, since that's a thing the MAC is supposed to set on frame transmit - we set it on header creation, but assuming that upper layers do not blindly duplicate our headers, this is fine. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15ieee802154: add definitions for link-layer security and header functionsPhoebe Buckheister2-0/+38
When dealing with 802.15.4, one often has to know the maximum payload size for a given packet. This depends on many factors, one of which is whether or not a security header is present in the frame. These definitions and functions provide an easy way for any upper layer to calculate the maximum payload size for a packet. The first obvious user for this is 6lowpan, which duplicates this calculation and gets it partially wrong because it ignores security headers. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15net: Fix CONFIG_SYSCTL ifdef test.David S. Miller1-1/+1
> include/net/ip.h:211:5: warning: "CONFIG_SYSCTL" is not defined [-Wundef] > #if CONFIG_SYSCTL > ^ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15net: Use a more standard macro for INET_ADDR_COOKIEJoe Perches1-3/+5
Missing a colon on definition use is a bit odd so change the macro for the 32 bit case to declare an __attribute__((unused)) and __deprecated variable. The __deprecated attribute will cause gcc to emit an error if the variable is actually used. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net/mlx4_core: Enforce irq affinity changes immediatlyYuval Atias1-0/+3
During heavy traffic, napi is constatntly polling the complition queue and no interrupt is fired. Because of that, changes to irq affinity are ignored until traffic is stopped and resumed. By registering to the irq notifier mechanism, and forcing interrupt when affinity is changed, irq affinity changes will be immediatly enforced. Signed-off-by: Yuval Atias <yuvala@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14ipv4: make ip_local_reserved_ports per netnsWANG Cong2-3/+15
ip_local_port_range is already per netns, so should ip_local_reserved_ports be. And since it is none by default we don't actually need it when we don't enable CONFIG_SYSCTL. By the way, rename inet_is_reserved_local_port() to inet_is_local_reserved_port() Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net: support marking accepting TCP socketsLorenzo Colitti2-0/+11
When using mark-based routing, sockets returned from accept() may need to be marked differently depending on the incoming connection request. This is the case, for example, if different socket marks identify different networks: a listening socket may want to accept connections from all networks, but each connection should be marked with the network that the request came in on, so that subsequent packets are sent on the correct network. This patch adds a sysctl to mark TCP sockets based on the fwmark of the incoming SYN packet. If enabled, and an unmarked socket receives a SYN, then the SYN packet's fwmark is written to the connection's inet_request_sock, and later written back to the accepted socket when the connection is established. If the socket already has a nonzero mark, then the behaviour is the same as it is today, i.e., the listening socket's fwmark is used. Black-box tested using user-mode linux: - IPv4/IPv6 SYN+ACK, FIN, etc. packets are routed based on the mark of the incoming SYN packet. - The socket returned by accept() is marked with the mark of the incoming SYN packet. - Tested with syncookies=1 and syncookies=2. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net: add a sysctl to reflect the fwmark on repliesLorenzo Colitti4-0/+9
Kernel-originated IP packets that have no user socket associated with them (e.g., ICMP errors and echo replies, TCP RSTs, etc.) are emitted with a mark of zero. Add a sysctl to make them have the same mark as the packet they are replying to. This allows an administrator that wishes to do so to use mark-based routing, firewalling, etc. for these replies by marking the original packets inbound. Tested using user-mode linux: - ICMP/ICMPv6 echo replies and errors. - TCP RST packets (IPv4 and IPv6). Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14tcp: use tcp_v4_send_synack on first SYN-ACKYuchung Cheng1-7/+7
To avoid large code duplication in IPv6, we need to first simplify the complicate SYN-ACK sending code in tcp_v4_conn_request(). To use tcp_v4(6)_send_synack() to send all SYN-ACKs, we need to initialize the mini socket's receive window before trying to create the child socket and/or building the SYN-ACK packet. So we move that initialization from tcp_make_synack() to tcp_v4_conn_request() as a new function tcp_openreq_init_req_rwin(). After this refactoring the SYN-ACK sending code is simpler and easier to implement Fast Open for IPv6. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Daniel Lee <longinus00@gmail.com> Signed-off-by: Jerry Chu <hkchu@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14tcp: simplify fast open cookie processingYuchung Cheng2-13/+1
Consolidate various cookie checking and generation code to simplify the fast open processing. The main goal is to reduce code duplication in tcp_v4_conn_request() for IPv6 support. Removes two experimental sysctl flags TFO_SERVER_ALWAYS and TFO_SERVER_COOKIE_NOT_CHKD used primarily for developmental debugging purposes. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Daniel Lee <longinus00@gmail.com> Signed-off-by: Jerry Chu <hkchu@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14tcp: move fastopen functions to tcp_fastopen.cYuchung Cheng1-2/+8
Move common TFO functions that will be used by both v4 and v6 to tcp_fastopen.c. Create a helper tcp_fastopen_queue_check(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Daniel Lee <longinus00@gmail.com> Signed-off-by: Jerry Chu <hkchu@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net: cdc_ncm/cdc_mbim: rework probing of NCM/MBIM functionsBjørn Mork1-1/+1
The NCM class match in the cdc_mbim driver is confusing and cause unexpected behaviour. The USB core guarantees that a USB interface is in altsetting 0 when probing starts. This means that devices implementing a NCM 1.0 backwards compatible MBIM function (a "NCM/MBIM function") always hit the NCM entry in the cdc_mbim driver match table. Such functions will never match any of the MBIM entries. This causes unexpeced behaviour for cases where the NCM and MBIM entries are differet, which is currently the case for all except Ericsson devices. Improve the probing of NCM/MBIM functions by looking up the device again in the cdc_mbim match table after switching to the MBIM identity. The shared altsetting selection is updated to better accommodate the new probing logic, returning the preferred altsetting for the control interface instead of the data interface. The control interface altsetting update is moved to the cdc_mbim driver. It is never necessary to change the control interface altsetting for NCM. Cc: Greg Suarez <gsuarez@smithmicro.com> Reported by: Yu-an Shih <yshih@nvidia.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-3/+0
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12vlan: rename __vlan_find_dev_deep() to __vlan_find_dev_deep_rcu()dingtianhong1-2/+2
The __vlan_find_dev_deep should always called in RCU, according David's suggestion, rename to __vlan_find_dev_deep_rcu looks more reasonable. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12net: rename local_df to ignore_dfWANG Cong3-6/+6
As suggested by several people, rename local_df to ignore_df, since it means "ignore df bit if it is set". Cc: Maciej Żenczykowski <maze@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller24-45/+130
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12net: filter: make BPF conversion more readableAlexei Starovoitov1-0/+51
Introduce BPF helper macros to define instructions (similar to old BPF_STMT/BPF_JUMP macros) Use them while converting classic BPF to internal and in BPF testsuite later. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-10Merge branch 'for-davem' of ↵David S. Miller1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-05-08 This one is all from Johannes: "Here are a few small fixes for the current cycle: radiotap TX flags were wrong (fix by Bob), Chun-Yeow fixes an SMPS issue with mesh interfaces, Eliad fixes a locking bug and a cfg80211 state problem and finally Henning sent me a fix for IBSS rate information." Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09ping: move ping_group_range out of CONFIG_SYSCTLCong Wang1-1/+6
Similarly, when CONFIG_SYSCTL is not set, ping_group_range should still work, just that no one can change it. Therefore we should move it out of sysctl_net_ipv4.c. And, it should not share the same seqlock with ip_local_port_range. BTW, rename it to ->ping_group_range instead. Cc: David S. Miller <davem@davemloft.net> Cc: Francois Romieu <romieu@fr.zoreil.com> Reported-by: Stefan de Konink <stefan@konink.de> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09ipv4: move local_port_range out of CONFIG_SYSCTLCong Wang1-1/+1
When CONFIG_SYSCTL is not set, ip_local_port_range should still work, just that no one can change it. Therefore we should move it out of sysctl_inet.c. Also, rename it to ->ip_local_ports instead. Cc: David S. Miller <davem@davemloft.net> Cc: Francois Romieu <romieu@fr.zoreil.com> Reported-by: Stefan de Konink <stefan@konink.de> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08Merge branch 'master' of ↵John W. Linville1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2014-05-08net: mdio: of_mdiobus_register(): fall back to mdiobus_register() for !CONFIG_OFDaniel Mack1-1/+6
If CONFIG_OF is not set, make of_mdiobus_register() call mdiobus_register() instead of returning -ENOSYS. This way, we can just call of_mdiobus_register() from all DT-enabled drivers to handle the compat cases. Signed-off-by: Daniel Mack <zonque@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08net: clean up snmp stats codeWANG Cong2-32/+18
commit 8f0ea0fe3a036a47767f9c80e (snmp: reduce percpu needs by 50%) reduced snmp array size to 1, so technically it doesn't have to be an array any more. What's more, after the following commit: commit 933393f58fef9963eac61db8093689544e29a600 Date: Thu Dec 22 11:58:51 2011 -0600 percpu: Remove irqsafe_cpu_xxx variants We simply say that regular this_cpu use must be safe regardless of preemption and interrupt state. That has no material change for x86 and s390 implementations of this_cpu operations. However, arches that do not provide their own implementation for this_cpu operations will now get code generated that disables interrupts instead of preemption. probably no arch wants to have SNMP_ARRAY_SZ == 2. At least after almost 3 years, no one complains. So, just convert the array to a single pointer and remove snmp_mib_init() and snmp_mib_free() as well. Cc: Christoph Lameter <cl@linux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07Revert "net: core: introduce netif_skb_dev_features"Florian Westphal1-6/+1
This reverts commit d206940319c41df4299db75ed56142177bb2e5f6, there are no more callers. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07tunnel: fix RFC number in comment for INET_ECN_decapsulate()Neal Cardwell1-1/+1
The quoted text and figure are from RFC 6040 ("Tunnelling of Explicit Congestion Notification"). Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211John W. Linville1-0/+12
2014-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-2/+18
Pull networking fixes from David Miller: 1) e1000e computes header length incorrectly wrt vlans, fix from Vlad Yasevich. 2) ns_capable() check in sock_diag netlink code, from Andrew Lutomirski. 3) Fix invalid queue pairs handling in virtio_net, from Amos Kong. 4) Checksum offloading busted in sxgbe driver due to incorrect descriptor layout, fix from Byungho An. 5) Fix build failure with SMC_DEBUG set to 2 or larger, from Zi Shen Lim. 6) Fix uninitialized A and X registers in BPF interpreter, from Alexei Starovoitov. 7) Fix arch dependencies of candence driver. 8) Fix netlink capabilities checking tree-wide, from Eric W Biederman. 9) Don't dump IFLA_VF_PORTS if netlink request didn't ask for it in IFLA_EXT_MASK, from David Gibson. 10) IPV6 FIB dump restart doesn't handle table changes that happen meanwhile, causing the code to loop forever or emit dups, fix from Kumar Sandararajan. 11) Memory leak on VF removal in bnx2x, from Yuval Mintz. 12) Bug fixes for new Altera TSE driver from Vince Bridgers. 13) Fix route lookup key in SCTP, from Xugeng Zhang. 14) Use BH blocking spinlocks in SLIP, as per a similar fix to CAN/SLCAN driver. From Oliver Hartkopp. 15) TCP doesn't bump retransmit counters in some code paths, fix from Eric Dumazet. 16) Clamp delayed_ack in tcp_cubic to prevent theoretical divides by zero. Fix from Liu Yu. 17) Fix locking imbalance in error paths of HHF packet scheduler, from John Fastabend. 18) Properly reference the transport module when vsock_core_init() runs, from Andy King. 19) Fix buffer overflow in cdc_ncm driver, from Bjørn Mork. 20) IP_ECN_decapsulate() doesn't see a correct SKB network header in ip_tunnel_rcv(), fix from Ying Cai. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits) net: macb: Fix race between HW and driver net: macb: Remove 'unlikely' optimization net: macb: Re-enable RX interrupt only when RX is done net: macb: Clear interrupt flags net: macb: Pass same size to DMA_UNMAP as used for DMA_MAP ip_tunnel: Set network header properly for IP_ECN_decapsulate() e1000e: Restrict MDIO Slow Mode workaround to relevant parts e1000e: Fix issue with link flap on 82579 e1000e: Expand workaround for 10Mb HD throughput bug e1000e: Workaround for dropped packets in Gig/100 speeds on 82579 net/mlx4_core: Don't issue PCIe speed/width checks for VFs net/mlx4_core: Load the Eth driver first net/mlx4_core: Fix slave id computation for single port VF net/mlx4_core: Adjust port number in qp_attach wrapper when detaching net: cdc_ncm: fix buffer overflow Altera TSE: ALTERA_TSE should depend on HAS_DMA vsock: Make transport the proto owner net: sched: lock imbalance in hhf qdisc net: mvmdio: Check for a valid interrupt instead of an error net phy: Check for aneg completion before setting state to PHY_RUNNING ...
2014-05-06Merge tag 'tty-3.15-rc4' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some tty and serial driver fixes for things reported recently" * tag 'tty-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix lockless tty buffer race Revert "tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc" drivers/tty/hvc: don't free hvc_console_setup after init n_tty: Fix n_tty_write crash when echoing in raw mode tty: serial: 8250_core.c Bug fix for Exar chips.
2014-05-05net: Call skb_checksum_init in IPv6Tom Herbert1-0/+7
Call skb_checksum_init instead of private functions. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: Call skb_checksum_init in IPv4Tom Herbert1-0/+6
Call skb_checksum_init instead of private functions. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: Generalize checksum_init functionsTom Herbert1-0/+93
Create a general __skb_checksum_validate function (actually a macro) to subsume the various checksum_init functions. This function can either init the checksum, or do the full validation (logically checksum_init+skb_check_complete)-- a flag specifies if full vaidation is performed. Also, there is a flag to the function to indicate that zero checksums are allowed (to support optional UDP checksums). Added several stub functions for calling __skb_checksum_validate. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: Allow csum_add to be provided in archTom Herbert1-0/+2
csum_add is really nothing more then add-with-carry which can be implemented efficiently in some architectures. Allow architecture to define this protected by HAVE_ARCH_CSUM_ADD. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05Merge branch 'for-davem' of ↵David S. Miller6-17/+162
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-05-02 Please pull this batch of updates intended for the 3.16 stream... For the mac80211 bits, Johannes says: "In this round we have a large number of small features and improvements from people too numerous to list here. The only really bit thing is Michał and Luca's CSA work (including changing how interface combination verification is done)." For the Bluetooth bits, Gustavo says: "Here goes some patches for the -next release. There is nothing really special for this pull request, just a bunch of refactors, fixes and clean ups." For the ath10k/ath6kl bits, Kalle says: "For ath6kl Kalle fixed a bunch of checkpatch warnings. In ath10k we had more changes, major ones being: * fix memory allocation failures after a firmware crash (Michal) * some rework of DFS configuration to enable it correctly in all cases (Michal) * add a new firmware crash option to make it possible to crash 10.1 firmware for testing purposes (Marek P) * fix RTS/CTS protection in certain cases (Marek K) * fix wrong RSSI and rate reporting in some cases (Janusz) * fix firmware stats reporting (Chun, Ben & Bartosz)" For the iwlwifi bits, Emmanuel says: "I have here a bunch of unrelated things. I disabled support for -7.ucode which means that I can removed a lot of code. Eliad has a brand new feature: we reduce the Tx power when the link allows - this reduces our power consumption. The regular changes in power and scan area. One interesting thing though is the patches from Johannes, we have now GRO which allows to increase our throughput in TCP Rx. The main advantage is that it reduces the number of TCP Acks - these TCP Acks are completely useless when we are using A-MPDU since the first packet of the A-MPDU generates a TCP Ack which is made obsolete by the next packets." Along with that, there are a variety of updates to b43, mwifiex, rtl8180 and wil6210 drivers and a handful of other updates here and there. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 13:08:30 +0300