summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2021-10-13devlink: Delete reload enable/disable interfaceLeon Romanovsky1-2/+0
Commit a0c76345e3d3 ("devlink: disallow reload operation during device cleanup") added devlink_reload_{enable,disable}() APIs to prevent reload operation from racing with device probe/dismantle. After recent changes to move devlink_register() to the end of device probe and devlink_unregister() to the beginning of device dismantle, these races can no longer happen. Reload operations will be denied if the devlink instance is unregistered and devlink_unregister() will block until all in-flight operations are done. Therefore, remove these devlink_reload_{enable,disable}() APIs. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13devlink: Allow control devlink ops behavior through feature maskLeon Romanovsky1-0/+6
Introduce new devlink call to set feature mask to control devlink behavior during device initialization phase after devlink_alloc() is already called. This allows us to set reload ops based on device property which is not known at the beginning of driver initialization. For the sake of simplicity, this API lacks any type of locking and needs to be called before devlink_register() to make sure that no parallel access to the ops is possible at this stage. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13devlink: Move netdev_to_devlink helpers to devlink.cLeon Romanovsky1-17/+0
Both netdev_to_devlink and netdev_to_devlink_port are used in devlink.c only, so move them in order to reduce their scope. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13devlink: Reduce struct devlink exposureLeon Romanovsky2-86/+40
The declaration of struct devlink in general header provokes the situation where internal fields can be accidentally used by the driver authors. In order to reduce such possible situations, let's reduce the namespace exposure of struct devlink. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net, neigh: Add NTF_MANAGED flag for managed neighbor entriesDaniel Borkmann2-18/+37
Allow a user space control plane to insert entries with a new NTF_EXT_MANAGED flag. The flag then indicates to the kernel that the neighbor entry should be periodically probed for keeping the entry in NUD_REACHABLE state iff possible. The use case for this is targeting XDP or tc BPF load-balancers which use the bpf_fib_lookup() BPF helper in order to piggyback on neighbor resolution for their backends. Given they cannot be resolved in fast-path, a control plane inserts the L3 (without L2) entries manually into the neighbor table and lets the kernel do the neighbor resolution either on the gateway or on the backend directly in case the latter resides in the same L2. This avoids to deal with L2 in the control plane and to rebuild what the kernel already does best anyway. NTF_EXT_MANAGED can be combined with NTF_EXT_LEARNED in order to avoid GC eviction. The kernel then adds NTF_MANAGED flagged entries to a per-neighbor table which gets triggered by the system work queue to periodically call neigh_event_send() for performing the resolution. The implementation allows migration from/to NTF_MANAGED neighbor entries, so that already existing entries can be converted by the control plane if needed. Potentially, we could make the interval for periodically calling neigh_event_send() configurable; right now it's set to DELAY_PROBE_TIME which is also in line with mlxsw which has similar driver-internal infrastructure c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table"). In future, the latter could possibly reuse the NTF_MANAGED neighbors as well. Example: # ./ip/ip n replace 192.168.178.30 dev enp5s0 managed extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a managed extern_learn REACHABLE [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Roopa Prabhu <roopa@nvidia.com> Link: https://linuxplumbersconf.org/event/11/contributions/953/ Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net, neigh: Extend neigh->flags to 32 bit to allow for extensionsRoopa Prabhu2-5/+10
Currently, all bits in struct ndmsg's ndm_flags are used up with the most recent addition of 435f2e7cc0b7 ("net: bridge: add support for sticky fdb entries"). This makes it impossible to extend the neighboring subsystem with new NTF_* flags: struct ndmsg { __u8 ndm_family; __u8 ndm_pad1; __u16 ndm_pad2; __s32 ndm_ifindex; __u16 ndm_state; __u8 ndm_flags; __u8 ndm_type; }; There are ndm_pad{1,2} attributes which are not used. However, due to uncareful design, the kernel does not enforce them to be zero upon new neighbor entry addition, and given they've been around forever, it is not possible to reuse them today due to risk of breakage. One option to overcome this limitation is to add a new NDA_FLAGS_EXT attribute for extended flags. In struct neighbour, there is a 3 byte hole between protocol and ha_lock, which allows neigh->flags to be extended from 8 to 32 bits while still being on the same cacheline as before. This also allows for all future NTF_* flags being in neigh->flags rather than yet another flags field. Unknown flags in NDA_FLAGS_EXT will be rejected by the kernel. Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net, neigh: Enable state migration between NUD_PERMANENT and NTF_USEDaniel Borkmann1-0/+1
Currently, it is not possible to migrate a neighbor entry between NUD_PERMANENT state and NTF_USE flag with a dynamic NUD state from a user space control plane. Similarly, it is not possible to add/remove NTF_EXT_LEARNED flag from an existing neighbor entry in combination with NTF_USE flag. This is due to the latter directly calling into neigh_event_send() without any meta data updates as happening in __neigh_update(). Thus, to enable this use case, extend the latter with a NEIGH_UPDATE_F_USE flag where we break the NUD_PERMANENT state in particular so that a latter neigh_event_send() is able to re-resolve a neighbor entry. Before fix, NUD_PERMANENT -> NUD_* & NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] As can be seen, despite the admin-triggered replace, the entry remains in the NUD_PERMANENT state. After fix, NUD_PERMANENT -> NUD_* & NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE [...] # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn STALE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] After the fix, the admin-triggered replace switches to a dynamic state from the NTF_USE flag which triggered a new neighbor resolution. Likewise, we can transition back from there, if needed, into NUD_PERMANENT. Similar before/after behavior can be observed for below transitions: Before fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] After fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [..] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10mlxsw: spectrum: use netif_is_macsec() instead of open codeJuhee Kang1-1/+1
Open code which is dev->priv_flags & IFF_MACSEC has already defined as netif_is_macsec(). So use netif_is_macsec() instead of open code. This patch doesn't change logic. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08net: introduce a function to check if a netdev name is in useAntoine Tenart1-0/+1
__dev_get_by_name is currently used to either retrieve a net device reference using its name or to check if a name is already used by a registered net device (per ns). In the later case there is no need to return a reference to a net device. Introduce a new helper, netdev_name_in_use, to check if a name is currently used by a registered net device without leaking a reference the corresponding net device. This helper uses netdev_name_node_lookup instead of __dev_get_by_name as we don't need the extra logic retrieving a reference to the corresponding net device. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08vsock: Enable y2038 safe timeval for timeoutRichard Palethorpe2-1/+16
Reuse the timeval compat code from core/sock to handle 32-bit and 64-bit timeval structures. Also introduce a new socket option define to allow using y2038 safe timeval under 32-bit. The existing behavior of sock_set_timeout and vsock's timeout setter differ when the time value is out of bounds. vsocks current behavior is retained at the expense of not being able to share the full implementation. This allows the LTP test vsock01 to pass under 32-bit compat mode. Fixes: fe0c72f3db11 ("socket: move compat timeout handling into sock.c") Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com> Cc: Richard Palethorpe <rpalethorpe@richiejp.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08eth: platform: add a helper for loading netdev->dev_addrJakub Kicinski1-0/+1
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. There is a handful of drivers which pass netdev->dev_addr as the destination buffer to eth_platform_get_mac_address(). Add a helper which takes a dev pointer instead, so it can call an appropriate helper. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski14-23/+42
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08Merge tag 'armsoc-fixes-5.15' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a larger than normal update for Arm SoC specific code, most of it in device trees, but also drivers and the omap and at91/sama7 platforms: - There are four new entries to the MAINTAINERS file: Sven Peter and Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar, and Vignesh Raghavendra for TI K3 - Build fixes to address randconfig warnings in sharpsl, dove, omap1, and qcom platforms as well as the scmi and op-tee subsystems - Regression fixes for missing CONFIG_FB and other options for several defconfigs - Several bug fixes for the newly added Microchip SAMA7 platform, mostly regarding power management - Missing SMP barriers to protect accesses to SCMI virtio device - Regression fixes for TI OMAP, including a boot-time hang on am335x. - Lots of bug fixes for NXP i.MX, mostly addressing incorrect settings in devicetree files, and one revert for broken suspend. - Fixes for ARM Juno/Vexpress devicetree files, addressing a couple of schema warnings. - Regression fixes for qualcomm SoC specific drivers and devicetree files, reverting an mdt_loader change and at least pastially reverting some of the 5.15 DTS changes, plus some minor bugfixes" * tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits) MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer firmware: arm_scmi: Add proper barriers to scmi virtio device firmware: arm_scmi: Simplify spinlocks in virtio transport ARM: dts: omap3430-sdp: Fix NAND device node bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893 ARM: sharpsl_param: work around -Wstringop-overread warning ARM: defconfig: gemini: Restore framebuffer ARM: dove: mark 'putc' as inline ARM: omap1: move omap15xx local bus handling to usb.c MAINTAINERS: Add Vignesh to TI K3 platform maintainership arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence arm64: dts: ls1028a: fix eSDHC2 node arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2 ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs ARM: at91: pm: preload base address of controllers in tlb ARM: at91: pm: group constants and addresses loading ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail ...
2021-10-07Merge tag 'misc-fixes-20211007' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull netfslib, cachefiles and afs fixes from David Howells: - Fix another couple of oopses in cachefiles tracing stemming from the possibility of passing in a NULL object pointer - Fix netfs_clear_unread() to set READ on the iov_iter so that source it is passed to doesn't do the wrong thing (some drivers look at the flag on iov_iter rather than other available information to determine the direction) - Fix afs_launder_page() to write back at the correct file position on the server so as not to corrupt data * tag 'misc-fixes-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix afs_launder_page() to set correct start file position netfs: Fix READ/WRITE confusion when calling iov_iter_xarray() cachefiles: Fix oops with cachefiles_cull() due to NULL object
2021-10-07Merge tag 'net-5.15-rc5' of ↵Linus Torvalds7-11/+20
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from xfrm, bpf, netfilter, and wireless. Current release - regressions: - xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new value in the middle of an enum - unix: fix an issue in unix_shutdown causing the other end read/write failures - phy: mdio: fix memory leak Current release - new code bugs: - mlx5e: improve MQPRIO resiliency against bad configs Previous releases - regressions: - bpf: fix integer overflow leading to OOB access in map element pre-allocation - stmmac: dwmac-rk: fix ethernet on rk3399 based devices - netfilter: conntrack: fix boot failure with nf_conntrack.enable_hooks=1 - brcmfmac: revert using ISO3166 country code and 0 rev as fallback - i40e: fix freeing of uninitialized misc IRQ vector - iavf: fix double unlock of crit_lock Previous releases - always broken: - bpf, arm: fix register clobbering in div/mod implementation - netfilter: nf_tables: correct issues in netlink rule change event notifications - dsa: tag_dsa: fix mask for trunked packets - usb: r8152: don't resubmit rx immediately to avoid soft lockup on device unplug - i40e: fix endless loop under rtnl if FW fails to correctly respond to capability query - mlx5e: fix rx checksum offload coexistence with ipsec offload - mlx5: force round second at 1PPS out start time and allow it only in supported clock modes - phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable sequence Misc: - xfrm: slightly rejig the new policy uAPI to make it less cryptic" * tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) net: prefer socket bound to interface when not in VRF iavf: fix double unlock of crit_lock i40e: Fix freeing of uninitialized misc IRQ vector i40e: fix endless loop under rtnl dt-bindings: net: dsa: marvell: fix compatible in example ionic: move filter sync_needed bit set gve: report 64bit tx_bytes counter from gve_handle_report_stats() gve: fix gve_get_stats() rtnetlink: fix if_nlmsg_stats_size() under estimation gve: Properly handle errors in gve_assign_qpl gve: Avoid freeing NULL pointer gve: Correct available tx qpl check unix: Fix an issue in unix_shutdown causing the other end read/write failures net: stmmac: trigger PCS EEE to turn off on link down net: pcs: xpcs: fix incorrect steps on disable EEE netlink: annotate data races around nlk->bound net: pcs: xpcs: fix incorrect CL37 AN sequence net: sfp: Fix typo in state machine debug string net/sched: sch_taprio: properly cancel timer from taprio_destroy() net: bridge: fix under estimation in br_get_linkxstats_size() ...
2021-10-07Merge tag 'hyperv-fixes-signed-20211007' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Replace uuid.h with types.h in a header (Andy Shevchenko) - Avoid sleeping in atomic context in PCI driver (Long Li) - Avoid sending IPI to self when it shouldn't (Vitaly Kuznetsov) * tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Avoid erroneously sending IPI to 'self' hyper-v: Replace uuid.h with types.h PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus
2021-10-07Merge tag 'wireless-drivers-next-2021-10-07' of ↵David S. Miller2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.16 First set of patches for v5.16. ath11k getting most of new features this time. Other drivers also have few new features, and of course the usual set of fixes and cleanups all over. Major changes: rtw88 * support adaptivity for ETSI/JP DFS region * 8821c: support RFE type4 wifi NIC brcmfmac * DMI nvram filename quirk for Cyberbook T116 tablet ath9k * load calibration data and pci init values via nvmem subsystem ath11k * include channel rx and tx time in survey dump statistics * support for setting fixed Wi-Fi 6 rates from user space * support for 80P80 and 160 MHz bandwidths * spectral scan support for QCN9074 * support for calibration data files per radio * support for calibration data via eeprom * support for rx decapsulation offload (data frames in 802.3 format) * support channel 2 in 6 GHz band ath10k * include frame time stamp in beacon and probe response frames wcn36xx * enable Idle Mode Power Save (IMPS) to reduce power consumption during idle ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: add a helper for loading netdev->dev_addrJakub Kicinski2-0/+2
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. There is a handful of drivers which pass netdev->dev_addr as the destination buffer to device_get_mac_address(). Add a helper which takes a dev pointer instead, so it can call an appropriate helper. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: remove the addr len from mac helpersJakub Kicinski1-2/+2
All callers pass in ETH_ALEN and the function itself will return -EINVAL for any other address length. Just assume it's ETH_ALEN like all other mac address helpers (nvm, of, platform). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: change the return type of mac address helpersJakub Kicinski1-3/+2
fwnode_get_mac_address() and device_get_mac_address() return a pointer to the buffer that was passed to them on success or NULL on failure. None of the callers care about the actual value, only if it's NULL or not. These semantics differ from of_get_mac_address() which returns an int so to avoid confusion make the device helpers return an errno. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07device property: move mac addr helpers to eth.cJakub Kicinski2-4/+6
Move the mac address helpers out, eth.c already contains a bunch of similar helpers. Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07of: net: add a helper for loading netdev->dev_addrJakub Kicinski1-0/+6
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. There are roughly 40 places where netdev->dev_addr is passed as the destination to a of_get_mac_address() call. Add a helper which takes a dev pointer instead, so it can call an appropriate helper. Note that of_get_mac_address() already assumes the address is 6 bytes long (ETH_ALEN) so use eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07of: net: move of_net under net/Jakub Kicinski1-1/+1
Rob suggests to move of_net.c from under drivers/of/ somewhere to the networking code. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/David S. Miller1-6/+9
ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2021-10-07 1) Fix a sysbot reported shift-out-of-bounds in xfrm_get_default. From Pavel Skripkin. 2) Fix XFRM_MSG_MAPPING ABI breakage. The new XFRM_MSG_MAPPING messages were accidentally not paced at the end. Fix by Eugene Syromiatnikov. 3) Fix the uapi for the default policy, use explicit field and macros and make it accessible to userland. From Nicolas Dichtel. 4) Fix a missing rcu lock in xfrm_notify_userpolicy(). From Nicolas Dichtel. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07net: mdio: add mdiobus_modify_changed()Russell King (Oracle)1-0/+2
Add mdiobus_modify_changed() helper to reflect the phylib and similar equivalents. This will avoid this functionality being open-coded, as has already happened in phylink, and it looks like other users will be appearing soon. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethtool: Add transceiver module extended stateIdo Schimmel2-0/+7
Add an extended state and sub-state to describe link issues related to transceiver modules. The 'ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY' extended sub-state tells user space that port is unable to gain a carrier because the CMIS Module State Machine did not reach the ModuleReady (Fully Operational) state. For example, if the module is stuck at ModuleLowPwr or ModuleFault state. In case of the latter, user space can read the fault reason from the module's EEPROM and potentially reset it. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethtool: Add ability to control transceiver modules' power modeIdo Schimmel3-0/+62
Add a pair of new ethtool messages, 'ETHTOOL_MSG_MODULE_SET' and 'ETHTOOL_MSG_MODULE_GET', that can be used to control transceiver modules parameters and retrieve their status. The first parameter to control is the power mode of the module. It is only relevant for paged memory modules, as flat memory modules always operate in low power mode. When a paged memory module is in low power mode, its power consumption is reduced to the minimum, the management interface towards the host is available and the data path is deactivated. User space can choose to put modules that are not currently in use in low power mode and transition them to high power mode before putting the associated ports administratively up. This is useful for user space that favors reduced power consumption and lower temperatures over reduced link up times. In QSFP-DD modules the transition from low power mode to high power mode can take a few seconds and this transition is only expected to get longer with future / more complex modules. User space can control the power mode of the module via the power mode policy attribute ('ETHTOOL_A_MODULE_POWER_MODE_POLICY'). Possible values: * high: Module is always in high power mode. * auto: Module is transitioned by the host to high power mode when the first port using it is put administratively up and to low power mode when the last port using it is put administratively down. The operational power mode of the module is available to user space via the 'ETHTOOL_A_MODULE_POWER_MODE' attribute. The attribute is not reported to user space when a module is not plugged-in. The user API is designed to be generic enough so that it could be used for modules with different memory maps (e.g., SFF-8636, CMIS). The only implementation of the device driver API in this series is for a MAC driver (mlxsw) where the module is controlled by the device's firmware, but it is designed to be generic enough so that it could also be used by implementations where the module is controlled by the CPU. CMIS testing ============ # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x03 (ModuleReady) LowPwrAllowRequestHW : Off LowPwrRequestSW : Off The module is not in low power mode, as it is not forced by hardware (LowPwrAllowRequestHW is off) or by software (LowPwrRequestSW is off). The power mode can be queried from the kernel. In case LowPwrAllowRequestHW was on, the kernel would need to take into account the state of the LowPwrRequestHW signal, which is not visible to user space. $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy high power-mode high Change the power mode policy to 'auto': # ethtool --set-module swp11 power-mode-policy auto Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x01 (ModuleLowPwr) LowPwrAllowRequestHW : Off LowPwrRequestSW : On Put the associated port administratively up which will instruct the host to transition the module to high power mode: # ip link set dev swp11 up Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode high Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x03 (ModuleReady) LowPwrAllowRequestHW : Off LowPwrRequestSW : Off Put the associated port administratively down which will instruct the host to transition the module to low power mode: # ip link set dev swp11 down Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x01 (ModuleLowPwr) LowPwrAllowRequestHW : Off LowPwrRequestSW : On SFF-8636 testing ================ # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled Power set : Off Power override : On ... Transmit avg optical power (Channel 1) : 0.7733 mW / -1.12 dBm Transmit avg optical power (Channel 2) : 0.7649 mW / -1.16 dBm Transmit avg optical power (Channel 3) : 0.7790 mW / -1.08 dBm Transmit avg optical power (Channel 4) : 0.7837 mW / -1.06 dBm Rcvr signal avg optical power(Channel 1) : 0.9302 mW / -0.31 dBm Rcvr signal avg optical power(Channel 2) : 0.9079 mW / -0.42 dBm Rcvr signal avg optical power(Channel 3) : 0.8993 mW / -0.46 dBm Rcvr signal avg optical power(Channel 4) : 0.8778 mW / -0.57 dBm The module is not in low power mode, as it is not forced by hardware (Power override is on) or by software (Power set is off). The power mode can be queried from the kernel. In case Power override was off, the kernel would need to take into account the state of the LPMode signal, which is not visible to user space. $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy high power-mode high Change the power mode policy to 'auto': # ethtool --set-module swp13 power-mode-policy auto Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled Power set : On Power override : On ... Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm Put the associated port administratively up which will instruct the host to transition the module to high power mode: # ip link set dev swp13 up Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode high Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled Power set : Off Power override : On ... Transmit avg optical power (Channel 1) : 0.7934 mW / -1.01 dBm Transmit avg optical power (Channel 2) : 0.7859 mW / -1.05 dBm Transmit avg optical power (Channel 3) : 0.7885 mW / -1.03 dBm Transmit avg optical power (Channel 4) : 0.7985 mW / -0.98 dBm Rcvr signal avg optical power(Channel 1) : 0.9325 mW / -0.30 dBm Rcvr signal avg optical power(Channel 2) : 0.9034 mW / -0.44 dBm Rcvr signal avg optical power(Channel 3) : 0.9086 mW / -0.42 dBm Rcvr signal avg optical power(Channel 4) : 0.8885 mW / -0.51 dBm Put the associated port administratively down which will instruct the host to transition the module to low power mode: # ip link set dev swp13 down Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled Power set : On Power override : On ... Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-06hyper-v: Replace uuid.h with types.hAndy Shevchenko1-1/+1
There is no user of anything in uuid.h in the hyperv.h. Replace it with more appropriate types.h. Fixes: f081bbb3fd03 ("hyper-v: Remove internal types from UAPI header") Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/20211001135544.1823-1-andriy.shevchenko@linux.intel.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-10-05Merge tag 'for-net-next-2021-10-01' of ↵Jakub Kicinski3-41/+241
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for MediaTek MT7922 and MT7921 - Enable support for AOSP extention in Qualcomm WCN399x and Realtek 8822C/8852A. - Add initial support for link quality and audio/codec offload. - Rework of sockets sendmsg to avoid locking issues. - Add vhci suspend/resume emulation. ==================== Link: https://lore.kernel.org/r/20211001230850.3635543-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-05ARM: omap1: move omap15xx local bus handling to usb.cArnd Bergmann1-0/+2
Commit 38225f2ef2f4 ("ARM/omap1: switch to use dma_direct_set_offset for lbus DMA offsets") removed a lot of mach/memory.h, but left the USB offset handling split into arch/arm/mach-omap1/usb.c and drivers/usb/host/ohci-omap.c. This can cause a randconfig build warning that now fails the build with -Werror: arch/arm/mach-omap1/usb.c:561:30: error: 'omap_1510_usb_ohci_nb' defined but not used [-Werror=unused-variable] 561 | static struct notifier_block omap_1510_usb_ohci_nb = { | ^~~~~~~~~~~~~~~~~~~~~ Move it all into the platform file to get rid of the final location that relies on mach/memory.h. Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210927144118.2464881-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-05mlx4: constify args for const dev_addrJakub Kicinski1-1/+1
netdev->dev_addr will become const soon. Make sure all functions which pass it around mark appropriate args as const. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05mlx4: replace mlx4_u64_to_mac() with u64_to_ether_addr()Jakub Kicinski1-10/+0
mlx4_u64_to_mac() predates the common helper but doesn't make the argument constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05mlx4: replace mlx4_mac_to_u64() with ether_addr_to_u64()Jakub Kicinski1-12/+0
mlx4_mac_to_u64() predates and opencodes ether_addr_to_u64(). It doesn't make the argument constant so it'll be problematic when dev->dev_addr becomes a const. Convert to the generic helper. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05netlink: remove netlink_broadcast_filteredFlorian Westphal1-4/+0
No users in tree since commit a3498436b3a0 ("netns: restrict uevents"), so remove this functionality. Cc: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05etherdevice: use __dev_addr_set()Jakub Kicinski1-1/+1
Andrew points out that eth_hw_addr_set() replaces memcpy() calls so we can't use ether_addr_copy() which assumes both arguments are 2-bytes aligned. Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05cachefiles: Fix oops with cachefiles_cull() due to NULL objectDave Wysochanski1-2/+2
When cachefiles_cull() calls cachefiles_bury_object(), it passes a NULL object. When this occurs, either trace_cachefiles_unlink() or trace_cachefiles_rename() may oops due to the NULL object. Check for NULL object in the tracepoint and if so, set debug_id to MAX_UINT as was done in 2908f5e101e3. The following oops was seen with xfstests generic/100. BUG: kernel NULL pointer dereference, address: 0000000000000010 ... RIP: 0010:trace_event_raw_event_cachefiles_unlink+0x4e/0xa0 [cachefiles] ... Call Trace: cachefiles_bury_object+0x242/0x430 [cachefiles] ? __vfs_removexattr_locked+0x10f/0x150 ? vfs_removexattr+0x51/0xd0 cachefiles_cull+0x84/0x120 [cachefiles] cachefiles_daemon_cull+0xd1/0x120 [cachefiles] cachefiles_daemon_write+0x158/0x190 [cachefiles] vfs_write+0xbc/0x260 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 The following oops was seen with xfstests generic/290. BUG: kernel NULL pointer dereference, address: 0000000000000010 ... RIP: 0010:trace_event_raw_event_cachefiles_rename+0x54/0xa0 [cachefiles] ... Call Trace: cachefiles_bury_object+0x35c/0x430 [cachefiles] cachefiles_cull+0x84/0x120 [cachefiles] cachefiles_daemon_cull+0xd1/0x120 [cachefiles] cachefiles_daemon_write+0x158/0x190 [cachefiles] vfs_write+0xbc/0x260 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 Fixes: 2908f5e101e3 ("fscache: Add a cookie debug ID and use that in traces") Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://listman.redhat.com/archives/linux-cachefs/2021-October/msg00009.html
2021-10-05Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo1-0/+1
ath.git patches for v5.16. Major changes: ath9k * load calibration data and pci init values via nvmem subsystem ath11k * include channel rx and tx time in survey dump statistics * support for setting fixed Wi-Fi 6 rates from user space * support for 80P80 and 160 MHz bandwidths * spectral scan support for QCN9074 * support for calibration data files per radio * support for calibration data via eeprom * support for rx decapsulation offload (data frames in 802.3 format) * support channel 2 in 6 GHz band ath10k * include frame time stamp in beacon and probe response frames wcn36xx * enable Idle Mode Power Save (IMPS) to reduce power consumption during idle
2021-10-05net/mlx5: Enable single IRQ for PCI FunctionShay Drory1-1/+0
Prior to this patch the driver requires two IRQs to function properly, one required IRQ for control and at least one required IRQ for IO. This requirement can be relaxed to one as the driver now allows sharing of IRQs, so control and IO EQs can share the same irq. This is needed for high scale amount of VFs. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-05net/mlx5: Shift control IRQ to the last indexShay Drory1-0/+2
Control IRQ is the first IRQ vector. This complicates handling of completion irqs as we need to offset them by one. in the next patch, there are scenarios where completion and control EQs will share the same irq. for example: functions with single IRQ. To ease such scenarios, we shift control IRQ to the end of the irq array. Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-05net/mlx5: Bridge, mark reg_c1 when pushing VLANVlad Buslov1-0/+9
On ingress VLAN push also assign value 0x7FE to reg_c1 tunnel id+opts bits (tunnel id 0, which is not a valid tunnel id, and option 0x7FE which was reserved by one of previous patches in the series). In following patch the reg value is matched on egress miss to restore the packet to its original state by removing the VLAN before passing it to the software data path. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-04net: phylink: add phylink_set_10g_modes() helperRussell King (Oracle)1-0/+1
Add a helper for setting 10Gigabit modes, so we have one central place that sets all appropriate 10G modes for a driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Update the TCP active termination 2 MSL timer ("TIME_WAIT")Prabhakar Kushwaha1-0/+1
Initialize 2 MSL timeout value used for the TCP TIME_WAIT state to non-zero default. This patch also removes magic number from qedi/qedi_main.c. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nikolay Assa <nassa@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Update TCP silly-window-syndrome timeout for iwarp, scsiNikolay Assa1-0/+2
Update TCP silly-window-syndrome timeout, for the cases where initiator's small TCP window size prevents FW from transmitting packets on the connection. Timeout causes FW to retransmit window probes if needed, preventing I/O stall if initiator ignores first window probe. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nikolay Assa <nassa@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Update qed_hsi.h for fw 8.59.1.0Prabhakar Kushwaha2-0/+2
The qed_hsi.h has been updated to support new FW version 8.59.1.0 with changes. - Updates FW HSI (Hardware Software interface) structures. - Addition/update in function declaration and defines as per HSI. - Add generic infrastructure for FW error reporting as part of common event queue handling. - Move malicious VF error reporting to FW error reporting infrastructure. - Move consolidation queue initialization from FW context to ramrod message. qed_hsi.h header file changes lead to change in many files to ensure compilation. This patch also fixes the existing checkpatch warnings and few important checks. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Update common_hsi for FW ver 8.59.1.0Prabhakar Kushwaha1-8/+105
The common_hsi.h has been updated for FW version 8.59.1.0 with below changes. - FW and Tools version. - New structures related to search table, packet duplication. - Structure for doorbell address for legacy mode without DEM. - Enhanced union rdma_eqe_data for RoCE Suspend Event Data. - New defines. This patch also fixes the existing checkpatch warnings and few important checks. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Remove e4_ and _e4 from FW HSIShai Malin5-387/+386
The existing qed/qede/qedr/qedi/qedf code uses chip-specific naming in structures, functions, variables and defines in FW HSI (Hardware Software Interface). The new FW version introduced a generic naming convention in HSI in-which the same code will be used across different versions for simpler maintainability. It also eases in providing support for new features. With this patch every "_e4" or "e4_" prefix or suffix is not needed anymore and it will be removed. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Fix kernel-doc warningsPrabhakar Kushwaha5-183/+230
This patch fixes all the qed and qede kernel-doc warnings according to the guidelines that are described in Documentation/doc-guide/kernel-doc.rst. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04ipv6: ioam: Add support for the ip6ip6 encapsulationJustin Iurman1-0/+29
This patch adds support for the ip6ip6 encapsulation by providing three encap modes: inline, encap and auto. Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04ipv6: ioam: Distinguish input and output for hop-limitJustin Iurman1-1/+2
This patch anticipates the support for the IOAM insertion inside in-transit packets, by making a difference between input and output in order to determine the right value for its hop-limit (inherited from the IPv6 hop-limit). Input case: happens before ip6_forward, the IPv6 hop-limit is not decremented yet -> decrement the IOAM hop-limit to reflect the new hop inside the trace. Output case: happens after ip6_forward, the IPv6 hop-limit has already been decremented -> keep the same value for the IOAM hop-limit. Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-03Merge tag 'driver-core-5.15-rc4' of ↵Linus Torvalds2-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some driver core and kernfs fixes for reported issues for 5.15-rc4. These fixes include: - kernfs positive dentry bugfix - debugfs_create_file_size error path fix - cpumask sysfs file bugfix to preserve the user/kernel abi (has been reported multiple times.) - devlink fixes for mdiobus devices as reported by the subsystem maintainers. Also included in here are some devlink debugging changes to make it easier for people to report problems when asked. They have already helped with the mdiobus and other subsystems reporting issues. All of these have been linux-next for a while with no reported issues" * tag 'driver-core-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: also call kernfs_set_rev() for positive dentry driver core: Add debug logs when fwnode links are added/deleted driver core: Create __fwnode_link_del() helper function driver core: Set deferred probe reason when deferred by driver core net: mdiobus: Set FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD for mdiobus parents driver core: fw_devlink: Add support for FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD driver core: fw_devlink: Improve handling of cyclic dependencies cpumask: Omit terminating null byte in cpumap_print_{list,bitmask}_to_buf debugfs: debugfs_create_file_size(): use IS_ERR to check for error
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-19 06:46:42 +0300