| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Various inet fields are currently racy.
do_ip_setsockopt() and do_ip_getsockopt() are mostly holding
the socket lock, but some (fast) paths do not.
Use a new inet->inet_flags to hold atomic bits in the series.
Remove inet->cmsg_flags, and use instead 9 bits from inet_flags.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
1) Fix a slab-out-of-bounds read in xfrm_address_filter.
From Lin Ma.
2) Fix the pfkey sadb_x_filter validation.
From Lin Ma.
3) Use the correct nla_policy structure for XFRMA_SEC_CTX.
From Lin Ma.
4) Fix warnings triggerable by bad packets in the encap functions.
From Herbert Xu.
5) Fix some slab-use-after-free in decode_session6.
From Zhengchao Shao.
6) Fix a possible NULL piointer dereference in xfrm_update_ae_params.
Lin Ma.
7) Add a forgotten nla_policy for XFRMA_MTIMER_THRESH.
From Lin Ma.
8) Don't leak offloaded policies.
From Leon Romanovsky.
9) Delete also the offloading part of an acquire state.
From Leon Romanovsky.
Please pull or let me know if there are problems.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-08-14
1) Handle PTP out of order CQEs issue
2) Check FW status before determining reset successful
3) Expose maximum supported SFs via devlink resource
4) MISC cleanups
* tag 'mlx5-updates-2023-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Don't query MAX caps twice
net/mlx5: Remove unused MAX HCA capabilities
net/mlx5: Remove unused CAPs
net/mlx5: Fix error message in mlx5_sf_dev_state_change_handler()
net/mlx5: Remove redundant check of mlx5_vhca_event_supported()
net/mlx5: Use mlx5_sf_start_function_id() helper instead of directly calling MLX5_CAP_GEN()
net/mlx5: Remove redundant SF supported check from mlx5_sf_hw_table_init()
net/mlx5: Use auxiliary_device_uninit() instead of device_put()
net/mlx5: E-switch, Add checking for flow rule destinations
net/mlx5: Check with FW that sync reset completed successfully
net/mlx5: Expose max possible SFs via devlink resource
net/mlx5e: Add recovery flow for tx devlink health reporter for unhealthy PTP SQ
net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs
net/mlx5: Consolidate devlink documentation in devlink/mlx5.rst
====================
Link: https://lore.kernel.org/r/20230814214144.159464-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace SIZE_MAX with ARRAY_SIZE in the register_net_sysctl macro. Now
that all the callers to register_net_sysctl are actual arrays, we can
call ARRAY_SIZE() without any compilation warnings. By calculating the
actual array size, this commit is making sure that register_net_sysctl
and all its callers forward the table_size into sysctl backend for when
the sentinel elements in the ctl_table arrays (last empty markers) are
removed. Without it the removal would fail lacking a stopping criteria
for traversing the ctl_table arrays.
Stopping condition continues to be based on both table size and the
procname null test. This is needed in order to allow for the systematic
removal al the sentinel element in subsequent commits: Before removing
sentinel the stopping criteria will be the last null element. When the
sentinel is removed then the (correct) size will take over.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Move from register_net_sysctl to register_net_sysctl_sz for all the
networking related files. Do this while making sure to mirror the NULL
assignments with a table_size of zero for the unprivileged users.
We need to move to the new function in preparation for when we change
SIZE_MAX to ARRAY_SIZE() in the register_net_sysctl macro. Failing to do
so would erroneously allow ARRAY_SIZE() to be called on a pointer. We
hold off the SIZE_MAX to ARRAY_SIZE change until we have migrated all
the relevant net sysctl registering functions to register_net_sysctl_sz
in subsequent commits.
An additional size function was added to the following files in order to
calculate the size of an array that is defined in another file:
include/net/ipv6.h
net/ipv6/icmp.c
net/ipv6/route.c
net/ipv6/sysctl_net_ipv6.c
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
This commit adds size to the register_net_sysctl indirection function to
facilitate the removal of the sentinel elements (last empty markers)
from the ctl_table arrays. Though we don't actually remove any sentinels
in this commit, register_net_sysctl* now has the capability of
forwarding table_size for when that happens.
We create a new function register_net_sysctl_sz with an extra size
argument. A macro replaces the existing register_net_sysctl. The size in
the macro is SIZE_MAX instead of ARRAY_SIZE to avoid compilation errors
while we systematically migrate to register_net_sysctl_sz. Will change
to ARRAY_SIZE in subsequent commits.
Care is taken to add table_size to the stopping criteria in such a way
that when we remove the empty sentinel element, it will continue
stopping in the last element of the ctl_table array.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
This commit adds table_size to __register_sysctl_init in preparation for
the removal of the sentinel elements in the ctl_table arrays (last empty
markers). And though we do *not* remove any sentinels in this commit, we
set things up by calculating the ctl_table array size with ARRAY_SIZE.
We add a table_size argument to __register_sysctl_init and modify the
register_sysctl_init macro to calculate the array size with ARRAY_SIZE.
The original callers do not need to be updated as they will go through
the new macro.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
This commit adds table_size to register_sysctl in preparation for the
removal of the sentinel elements in the ctl_table arrays (last empty
markers). And though we do *not* remove any sentinels in this commit, we
set things up by either passing the table_size explicitly or using
ARRAY_SIZE on the ctl_table arrays.
We replace the register_syctl function with a macro that will add the
ARRAY_SIZE to the new register_sysctl_sz function. In this way the
callers that are already using an array of ctl_table structs do not
change. For the callers that pass a ctl_table array pointer, we pass the
table_size to register_sysctl_sz instead of the macro.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
We make these changes in order to prepare __register_sysctl_table and
its callers for when we remove the sentinel element (empty element at
the end of ctl_table arrays). We don't actually remove any sentinels in
this commit, but we *do* make sure to use ARRAY_SIZE so the table_size
is available when the removal occurs.
We add a table_size argument to __register_sysctl_table and adjust
callers, all of which pass ctl_table pointers and need an explicit call
to ARRAY_SIZE. We implement a size calculation in register_net_sysctl in
order to forward the size of the array pointer received from the network
register calls.
The new table_size argument does not yet have any effect in the
init_header call which is still dependent on the sentinel's presence.
table_size *does* however drive the `kzalloc` allocation in
__register_sysctl_table with no adverse effects as the allocated memory
is either one element greater than the calculated ctl_table array (for
the calls in ipc_sysctl.c, mq_sysctl.c and ucount.c) or the exact size
of the calculated ctl_table array (for the call from sysctl_net.c and
register_sysctl). This approach will allows us to "just" remove the
sentinel without further changes to __register_sysctl_table as
table_size will represent the exact size for all the callers at that
point.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The new ctl_table_size element will hold the size of the ctl_table
arrays contained in the ctl_table_header. This value should eventually
be passed by the callers to the sysctl register infrastructure. And
while this commit introduces the variable, it does not set nor use it
because that requires case by case considerations for each caller.
It provides two important things: (1) A place to put the
result of the ctl_table array calculation when it gets introduced for
each caller. And (2) the size that will be used as the additional
stopping criteria in the list_for_each_table_entry macro (to be added
when all the callers are migrated)
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Jakub Kicinski says:
We've got some new kdoc warnings here:
net/netfilter/nft_set_pipapo.c:1557: warning: Function parameter or member '_set' not described in 'pipapo_gc'
net/netfilter/nft_set_pipapo.c:1557: warning: Excess function parameter 'set' description in 'pipapo_gc'
include/net/netfilter/nf_tables.h:577: warning: Function parameter or member 'dead' not described in 'nft_set'
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20230810104638.746e46f1@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Add some APIs and helpers required for convenient construction
of replies and notifications based on struct genl_info.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Having family in struct genl_info is quite useful. It cuts
down the number of arguments which need to be passed to
helpers which already take struct genl_info.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since dumps carry struct genl_info now, use the attrs pointer
from genl_info and remove the one in struct genl_dumpit_info.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Numerous production kernel configs (see [1, 2]) are choosing to enable
CONFIG_DEBUG_LIST, which is also being recommended by KSPP for hardened
configs [3]. The motivation behind this is that the option can be used
as a security hardening feature (e.g. CVE-2019-2215 and CVE-2019-2025
are mitigated by the option [4]).
The feature has never been designed with performance in mind, yet common
list manipulation is happening across hot paths all over the kernel.
Introduce CONFIG_LIST_HARDENED, which performs list pointer checking
inline, and only upon list corruption calls the reporting slow path.
To generate optimal machine code with CONFIG_LIST_HARDENED:
1. Elide checking for pointer values which upon dereference would
result in an immediate access fault (i.e. minimal hardening
checks). The trade-off is lower-quality error reports.
2. Use the __preserve_most function attribute (available with Clang,
but not yet with GCC) to minimize the code footprint for calling
the reporting slow path. As a result, function size of callers is
reduced by avoiding saving registers before calling the rarely
called reporting slow path.
Note that all TUs in lib/Makefile already disable function tracing,
including list_debug.c, and __preserve_most's implied notrace has
no effect in this case.
3. Because the inline checks are a subset of the full set of checks in
__list_*_valid_or_report(), always return false if the inline
checks failed. This avoids redundant compare and conditional
branch right after return from the slow path.
As a side-effect of the checks being inline, if the compiler can prove
some condition to always be true, it can completely elide some checks.
Since DEBUG_LIST is functionally a superset of LIST_HARDENED, the
Kconfig variables are changed to reflect that: DEBUG_LIST selects
LIST_HARDENED, whereas LIST_HARDENED itself has no dependency on
DEBUG_LIST.
Running netperf with CONFIG_LIST_HARDENED (using a Clang compiler with
"preserve_most") shows throughput improvements, in my case of ~7% on
average (up to 20-30% on some test cases).
Link: https://r.android.com/1266735 [1]
Link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/blob/main/config [2]
Link: https://kernsec.org/wiki/index.php/Kernel_Self_Protection_Project/Recommended_Settings [3]
Link: https://googleprojectzero.blogspot.com/2019/11/bad-binder-android-in-wild-exploit.html [4]
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20230811151847.1594958-3-elver@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Turn the list debug checking functions __list_*_valid() into inline
functions that wrap the out-of-line functions. Care is taken to ensure
the inline wrappers are always inlined, so that additional compiler
instrumentation (such as sanitizers) does not result in redundant
outlining.
This change is preparation for performing checks in the inline wrappers.
No functional change intended.
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20230811151847.1594958-2-elver@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
[1]: "On X86-64 and AArch64 targets, this attribute changes the calling
convention of a function. The preserve_most calling convention attempts
to make the code in the caller as unintrusive as possible. This
convention behaves identically to the C calling convention on how
arguments and return values are passed, but it uses a different set of
caller/callee-saved registers. This alleviates the burden of saving and
recovering a large register set before and after the call in the caller.
If the arguments are passed in callee-saved registers, then they will be
preserved by the callee across the call. This doesn't apply for values
returned in callee-saved registers.
* On X86-64 the callee preserves all general purpose registers, except
for R11. R11 can be used as a scratch register. Floating-point
registers (XMMs/YMMs) are not preserved and need to be saved by the
caller.
* On AArch64 the callee preserve all general purpose registers, except
x0-X8 and X16-X18."
[1] https://clang.llvm.org/docs/AttributeReference.html#preserve-most
Introduce the attribute to compiler_types.h as __preserve_most.
Use of this attribute results in better code generation for calls to
very rarely called functions, such as error-reporting functions, or
rarely executed slow paths.
Beware that the attribute conflicts with instrumentation calls inserted
on function entry which do not use __preserve_most themselves. Notably,
function tracing which assumes the normal C calling convention for the
given architecture. Where the attribute is supported, __preserve_most
will imply notrace. It is recommended to restrict use of the attribute
to functions that should or already disable tracing.
Note: The additional preprocessor check against architecture should not
be necessary if __has_attribute() only returns true where supported;
also see https://github.com/ClangBuiltLinux/linux/issues/1908. But until
__has_attribute() does the right thing, we also guard by known-supported
architectures to avoid build warnings on other architectures.
The attribute may be supported by a future GCC version (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110899).
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230811151847.1594958-1-elver@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Netlink GET implementations must currently juggle struct genl_info
and struct netlink_callback, depending on whether they were called
from doit or dumpit.
Add genl_info to the dump state and populate the fields.
This way implementations can simply pass struct genl_info around.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only three families use info->userhdr today and going forward
we discourage using fixed headers in new families.
So having the pointer to user header in struct genl_info
is an overkill. Compute the header pointer at runtime.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct netlink_callback has a const nlh pointer, make the
pointer in struct genl_info const as well, to make copying
between the two easier.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These declarations is never implemented since the beginning of git history.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Kumar reported a KASAN splat in tcp_v6_rcv:
bash-5.2# ./test_progs -t btf_skc_cls_ingress
...
[ 51.810085] BUG: KASAN: slab-out-of-bounds in tcp_v6_rcv+0x2d7d/0x3440
[ 51.810458] Read of size 2 at addr ffff8881053f038c by task test_progs/226
The problem is that inet[6]_steal_sock accesses sk->sk_protocol without
accounting for request or timewait sockets. To fix this we can't just
check sock_common->skc_reuseport since that flag is present on timewait
sockets.
Instead, add a fullsock check to avoid the out of bands access of sk_protocol.
Fixes: 9c02bec95954 ("bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign")
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230815-bpf-next-v2-1-95126eaa4c1b@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The use of the "class" argument name in the ioprio_value() inline
function in include/uapi/linux/ioprio.h confuses C++ compilers
resulting in compilation errors such as:
/usr/include/linux/ioprio.h:110:43: error: expected primary-expression before ‘int’
110 | static __always_inline __u16 ioprio_value(int class, int level, int hint)
| ^~~
for user C++ programs including linux/ioprio.h.
Avoid these errors by renaming the arguments of the ioprio_value()
function to prioclass, priolevel and priohint. For consistency, the
arguments of the IOPRIO_PRIO_VALUE() and IOPRIO_PRIO_VALUE_HINT() macros
are also renamed in the same manner.
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Fixes: 01584c1e2337 ("scsi: block: Improve ioprio value validity checks")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20230814215833.259286-1-dlemoal@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU
disable control sometimes fail to disable the counters. This will lead
to error or inaccurate data since before we enable the counters the
counter's still counting for the event used in last perf session.
This patch tries to fix this by hardening the global disable process.
Before disable the PMU, writing an invalid event type (0xffff) to
focibly stop the counters. Correspondingly restore each events on
pmu::pmu_enable().
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Drops a race where 2 threads could spot a positive value and both
proceed to dec to -1, without reporting anything.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Message-Id: <20230811194814.1612336-1-mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
sharing
When NFS superblocks are created by automounting, their LSM parameters
aren't set in the fs_context struct prior to sget_fc() being called,
leading to failure to match existing superblocks.
This bug leads to messages like the following appearing in dmesg when
fscache is enabled:
NFS: Cache volume key already in use (nfs,4.2,2,108,106a8c0,1,,,,100000,100000,2ee,3a98,1d4c,3a98,1)
Fix this by adding a new LSM hook to load fc->security for submount
creation.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/165962680944.3334508.6610023900349142034.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165962729225.3357250.14350728846471527137.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/165970659095.2812394.6868894171102318796.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/166133579016.3678898.6283195019480567275.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/217595.1662033775@warthog.procyon.org.uk/ # v5
Fixes: 9bc61ab18b1d ("vfs: Introduce fs_context, switch vfs_kern_mount() to it.")
Fixes: 779df6a5480f ("NFS: Ensure security label is set for root inode")
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230808-master-v9-1-e0ecde888221@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Subsystems that want to implement a struct bpf_struct_ops structure to
enable struct_ops maps must currently reverse engineer how the structure
works. Given that this is meant to be a way for subsystem maintainers to
extend their subsystems using BPF, let's document it to make it a bit
easier on them.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230814185908.700553-3-void@manifault.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This commit adds a kthread-creation callback to the
_torture_create_kthread() function, which allows callers of a new
torture_create_kthread_cb() macro to specify a function to be invoked
after the kthread is created but before it is awakened for the first time.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: kernel-team@android.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: John Stultz <jstultz@google.com>
|
|
This reverts 6f822e1b5d9dda3d20e87365de138046e3baa03a - this helper is
used by bcachefs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Link: https://lore.kernel.org/r/20230813182636.2966159-4-kent.overstreet@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
- bio_set_pages_dirty(), bio_check_pages_dirty() - dio path
- blk_status_to_str() - error messages
- bio_add_folio() - this should definitely be exported for everyone,
it's the modern version of bio_add_page()
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: linux-block@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20230813182636.2966159-2-kent.overstreet@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Each device cap has two modes: MAX and CUR. The driver maintains a
cache of both modes of the capabilities. For most device caps, the MAX
cap mode is never used.
Hence, remove all driver queries of the MAX mode of the said caps as
well as their helper MACROs.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5 driver queries the device for VECTOR_CALC and SHAMPO caps, but
there isn't any user who requires them.
As well as, MLX5_MCAM_REGS_0x9080_0x90FF is queried but not used.
Thus, drop all usages and definitions of the mentioned caps above.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Even if the PF driver had no error on his part of the sync reset flow,
the firmware can see wider picture as it syncs all the PFs in the flow.
So add at end of sync reset flow check with firmware by reading MFRL
register and initialization segment that the flow had no issue from
firmware point of view too.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Summary
=======
This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to
implement something like mount -t ext4 --exclusive /dev/sda /B which
fails if a superblock for the requested filesystem does already exist:
Before this patch
-----------------
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /A
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /B
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL
--------------------------------------------------------------------------
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed
Details
=======
As mentioned on the list (cf. [1]-[3]) mount requests like
mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new
superblock has been created and mounted or an existing superblock has
been reused and a bind-mount has been created.
This becomes clear in the following example where two processes create
the same mount for the same block device:
P1 P2
fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000");
// wins and creates superblock
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
// finds compatible superblock of P1
// spins until P1 sets SB_BORN and grabs a reference
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs);
move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B")
Not just does P2 get a bind-mount but the mount options that P2
requestes are silently ignored. The VFS itself doesn't, can't and
shouldn't enforce filesystem specific mount option compatibility. It
only enforces incompatibility for read-only <-> read-write transitions:
mount -t ext4 /dev/sda /A
mount -t ext4 -o ro /dev/sda /B
The read-only request will fail with EBUSY as the VFS can't just
silently transition a superblock from read-write to read-only or vica
versa without risking security issues.
To userspace this silent superblock reuse can become a security issue in
because there is currently no straightforward way for userspace to know
that they did indeed manage to create a new superblock and didn't just
reuse an existing one.
This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that
returns EBUSY if an existing superblock would be reused. Userspace that
needs to be sure that it did create a new superblock with the requested
mount options can request superblock creation using this command. If the
command succeeds they can be sure that they did create a new superblock
with the requested mount options.
This requires the new mount api. With the old mount api it would be
necessary to plumb this through every legacy filesystem's
file_system_type->mount() method. If they want this feature they are
most welcome to switch to the new mount api.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
each high-level superblock creation helper:
(1) get_tree_nodev()
Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and
FSCONFIG_CMD_CREATE_EXCL are equivalent.
The binderfs or overlayfs filesystems are examples.
(4) get_tree_keyed()
Finds an existing superblock based on sb->s_fs_info. Hence,
FSCONFIG_CMD_CREATE would reuse an existing superblock whereas
FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The mqueue or nfsd filesystems are examples.
(2) get_tree_bdev()
This effectively works like get_tree_keyed().
The ext4 or xfs filesystems are examples.
(3) get_tree_single()
Only one superblock of this filesystem type can ever exist.
Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock
whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The securityfs or configfs filesystems are examples.
Note that some single-instance filesystems never destroy the
superblock once it has been created during the first mount. For
example, if securityfs has been mounted at least onces then the
created superblock will never be destroyed again as long as there is
still an LSM making use it. Consequently, even if securityfs is
unmounted and the superblock seemingly destroyed it really isn't
which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting
reusing an existing superblock.
This is acceptable thugh since special purpose filesystems such as
this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway
and if they do it's probably to make sure that mount options aren't
ignored.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
filesystems that make use of the low-level sget_fc() helper directly.
They're all effectively variants on get_tree_keyed(), get_tree_bdev(),
or get_tree_nodev():
(5) mtd_get_sb()
Similar logic to get_tree_keyed().
(6) afs_get_tree()
Similar logic to get_tree_keyed().
(7) ceph_get_tree()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev().
(8) fuse_get_tree_submount()
Similar logic to get_tree_nodev().
(9) fuse_get_tree()
Forces reuse of existing FUSE superblock.
Forces reuse of existing superblock if passed in file refers to an
existing FUSE connection.
If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd
referring to an existing FUSE connections this would cause the
superblock reusal to fail. If reusing is the intent then
FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(10) fuse_get_tree()
-> get_tree_nodev()
Same logic as in get_tree_nodev().
(11) fuse_get_tree()
-> get_tree_bdev()
Same logic as in get_tree_bdev().
(12) virtio_fs_get_tree()
Same logic as get_tree_keyed().
(13) gfs2_meta_get_tree()
Forces reuse of existing gfs2 superblock.
Mounting gfs2meta enforces that a gf2s superblock must already
exist. If not, it will error out. Consequently, mounting gfs2meta
with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the
intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(14) kernfs_get_tree()
Similar logic to get_tree_keyed().
(15) nfs_get_tree_common()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via NFS_MOUNT_UNSHARED. This effectively turns it into
get_tree_nodev().
Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner
Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner
Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The get_tree_single_reconf() helper isn't used anywhere. Remove it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230802-vfs-super-exclusive-v2-1-95dc4e41b870@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The PSGMII interface is similar to QSGMII. The main difference
is that the PSGMII interface combines five SGMII lines into a
single link while in QSGMII only four lines are combined.
Similarly to the QSGMII, this interface mode might also needs
special handling within the MAC driver.
It is commonly used by Qualcomm with their QCA807x PHY series and
modern WiSoC-s.
Add definitions for the PHY layer to allow to express this type
of connection between the MAC and PHY.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
From: Eric Garver <eric@garver.life>
This adds an explicit drop action. This is used by OVS to drop packets
for which it cannot determine what to do. An explicit action in the
kernel allows passing the reason _why_ the packet is being dropped or
zero to indicate no particular error happened (i.e: OVS intentionally
dropped the packet).
Since the error codes coming from userspace mean nothing for the kernel,
we squash all of them into only two drop reasons:
- OVS_DROP_EXPLICIT_WITH_ERROR to indicate a non-zero value was passed
- OVS_DROP_EXPLICIT to indicate a zero value was passed (no error)
e.g. trace all OVS dropped skbs
# perf trace -e skb:kfree_skb --filter="reason >= 0x30000"
[..]
106.023 ping/2465 skb:kfree_skb(skbaddr: 0xffffa0e8765f2000, \
location:0xffffffffc0d9b462, protocol: 2048, reason: 196611)
reason: 196611 --> 0x30003 (OVS_DROP_EXPLICIT)
Also, this patch allows ovs-dpctl.py to add explicit drop actions as:
"drop" -> implicit empty-action drop
"drop(0)" -> explicit non-error action drop
"drop(42)" -> explicit error action drop
Signed-off-by: Eric Garver <eric@garver.life>
Co-developed-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a new drop reason subsystem for openvswitch and add the first
drop reason to represent last-action drops.
Last-action drops happen when a flow has an empty action list or there
is no action that consumes the packet (output, userspace, recirc, etc).
It is the most common way in which OVS drops packets.
Implementation-wise, most of these skb-consuming actions already call
"consume_skb" internally and return directly from within the
do_execute_actions() loop so with minimal changes we can assume that
any skb that exits the loop normally is a packet drop.
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mptcp protocol maintains an additional socket just to easily
invoke a few stream operations on the first subflow. One of them
is inet_listen().
Factor out an helper operating directly on the (locked) struct sock,
to allow get rid of the above dependency in the next patch without
duplicating the existing code.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mptcp protocol maintains an additional socket just to easily
invoke a few stream operations on the first subflow. One of
them is bind().
Factor out the helpers operating directly on the struct sock, to
allow get rid of the above dependency in the next patch without
duplicating the existing code.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We mix up KUNIT_TRIGGER_STATIC_STUB and KUNIT_STATIC_STUB_REDIRECT in
static_stub header. Just correct KUNIT_TRIGGER_STATIC_STUB to
KUNIT_STATIC_STUB_REDIRECT which is documented.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit db3685b4046f ("net: remove obsolete members from struct net")
removed the uses of struct list_head from this header, without removing
the corresponding included header.
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
bluetooth-next pull request for net-next:
- Add new VID/PID for Mediatek MT7922
- Add support multiple BIS/BIG
- Add support for Intel Gale Peak
- Add support for Qualcomm WCN3988
- Add support for BT_PKT_STATUS for ISO sockets
- Various fixes for experimental ISO support
- Load FW v2 for RTL8852C
- Add support for NXP AW693 chipset
- Add support for Mediatek MT2925
|
|
For now, skb will be dropped when no memory, which makes client keep
retrans util timeout and it's not friendly to the users.
In this patch, we reply an ACK with zero-window in this case to update
the snd_wnd of the sender to 0. Therefore, the sender won't timeout the
connection and will probe the zero-window with the retransmits.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only remaining consumer is new_inode, where it showed up in 2001 as
commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1]
with a changelog which does not mention it.
Since then the line got only touched up to keep compiling.
While it may have been of benefit back in the day, it is guaranteed to
at best not get in the way in the multicore setting -- as the code
performs *a lot* of work between the prefetch and actual lock acquire,
any contention means the cacheline is already invalid by the time the
routine calls spin_lock(). It adds spurious traffic, for short.
On top of it prefetch is notoriously tricky to use for single-threaded
purposes, making it questionable from the get go.
As such, remove it.
I admit upfront I did not see value in benchmarking this change, but I
can do it if that is deemed appropriate.
Removal from new_inode and of the entire thing are in the same patch as
requested by Linus, so whatever weird looks can be directed at that guy.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mitigation fixes from Borislav Petkov:
"The first set of fallout fixes after the embargo madness. There will
be another set next week too.
- A first series of cleanups/unifications and documentation
improvements to the SRSO and GDS mitigations code which got
postponed to after the embargo date
- Fix the SRSO aliasing addresses assertion so that the LLVM linker
can parse it too"
* tag 'x86_bugs_for_v6.5_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
driver core: cpu: Fix the fallback cpu_show_gds() name
x86: Move gds_ucode_mitigated() declaration to header
x86/speculation: Add cpu_show_gds() prototype
driver core: cpu: Make cpu_show_not_affected() static
x86/srso: Fix build breakage with the LLVM linker
Documentation/srso: Document IBPB aspect and fix formatting
driver core: cpu: Unify redundant silly stubs
Documentation/hw-vuln: Unify filename specification in index
|
|
Commit a3b80e107894 ("bpf: Allocate ID for bpf_link")
removed the implementation but not the declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230809140556.45836-1-yuehaibing@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fixes for request_queue state (Ming)
- Another uuid quirk (August)
- RCU poll fix for NVMe (Ming)
- Fix for an IO stall with polled IO (me)
- Fix for blk-iocost stats enable/disable accounting (Chengming)
- Regression fix for large pages for zram (Christoph)
* tag 'block-6.5-2023-08-11' of git://git.kernel.dk/linux:
nvme: core: don't hold rcu read lock in nvme_ns_chr_uring_cmd_iopoll
blk-iocost: fix queue stats accounting
block: don't make REQ_POLLED imply REQ_NOWAIT
block: get rid of unused plug->nowait flag
zram: take device and not only bvec offset into account
nvme-pci: add NVME_QUIRK_BOGUS_NID for Samsung PM9B1 256G and 512G
nvme-rdma: fix potential unbalanced freeze & unfreeze
nvme-tcp: fix potential unbalanced freeze & unfreeze
nvme: fix possible hang when removing a controller during error recovery
|
|
The CIS/CIG ids of ISO connections are defined only when the connection
is unicast.
Fix the lookup functions to check for unicast first. Ensure CIG/CIS
IDs have valid value also in state BT_OPEN.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This introduces PTR_UINT/UINT_PTR macros and replace the use of
PTR_ERR/ERR_PTR.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
