| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Let's make it consistent with the naming of the files but also with the
naming of CONFIG_BALLOON_MIGRATION.
While at it, add a "/* CONFIG_BALLOON */".
Link: https://lkml.kernel.org/r/20260119230133.3551867-24-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While compaction depends on migration, the other direction is not the
case. So let's make it clearer that this is all about migration of
balloon pages.
Adjust all comments/docs in the core to talk about "migration" instead of
"compaction".
While at it add some "/* CONFIG_BALLOON_MIGRATION */".
Link: https://lkml.kernel.org/r/20260119230133.3551867-23-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Even without CONFIG_BALLOON_COMPACTION this infrastructure implements
basic list and page management for a memory balloon.
Link: https://lkml.kernel.org/r/20260119230133.3551867-21-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Adding "extern" to functions is frowned-upon. Let's just get rid of it
for all functions here.
Link: https://lkml.kernel.org/r/20260119230133.3551867-19-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's move the helpers that are not required by drivers anymore.
While at it, drop the doc of balloon_page_device() as it is trivial.
[david@kernel.org: move balloon_page_device() under CONFIG_BALLOON_COMPACTION]
Link: https://lkml.kernel.org/r/27f0adf1-54c1-4d99-8b7f-fd45574e7f41@kernel.org
Link: https://lkml.kernel.org/r/20260119230133.3551867-16-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's just remove balloon_mapping_gfp_mask().
Link: https://lkml.kernel.org/r/20260119230133.3551867-15-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's remove these helpers as they are unused now.
Link: https://lkml.kernel.org/r/20260119230133.3551867-14-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ever since commit 68f2736a8583 ("mm: Convert all PageMovable users to
movable_operations") we no longer store an inode in balloon_dev_info, so
we can stop including "fs.h".
Link: https://lkml.kernel.org/r/20260119230133.3551867-12-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is no need to expose this anymore, so let's just make it static.
Link: https://lkml.kernel.org/r/20260119230133.3551867-11-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's stop using the page lock in balloon code and instead use only the
balloon_device_lock.
As soon as we set the PG_movable_ops flag, we might now get isolation
callbacks for that page as we are no longer holding the page lock. In
there, we'll simply synchronize using the balloon_device_lock.
So in balloon_page_isolate() lookup the balloon_dev_info through
page->private under balloon_device_lock.
It's crucial that we update page->private under the balloon_device_lock,
so the isolation callback can properly deal with concurrent deflation.
Consequently, make sure that balloon_page_finalize() is called under
balloon_device_lock as we remove a page from the list and clear
page->private. balloon_page_insert() is already called with the
balloon_device_lock held.
Note that the core will still lock the pages, for example in
isolate_movable_ops_page(). The lock is there still relevant for handling
the PageMovableOpsIsolated flag, but that can be later changed to use an
atomic test-and-set instead, or moved into the movable_ops backends.
Link: https://lkml.kernel.org/r/20260119230133.3551867-10-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In order to remove the dependency on the page lock for balloon pages, we
need a lock that is independent of the page.
It's crucial that we can handle the scenario where balloon deflation
(clearing page->private) can race with page isolation (using page->private
to obtain the balloon_dev_info where the lock currently resides).
The current lock in balloon_dev_info is therefore not suitable.
Fortunately, we never really have more than a single balloon device per
VM, so we can just keep it simple and use a static lock to protect all
balloon devices.
Based on this change we will remove the dependency on the page lock next.
Link: https://lkml.kernel.org/r/20260119230133.3551867-9-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's centralize it, by allowing for the driver to enable this handling
through a new flag (bool for now) in the balloon device info.
Note that we now adjust the counter when adding/removing a page into the
balloon list: when removing a page to deflate it, it will now happen
before the driver communicated with hypervisor, not afterwards.
This shouldn't make a difference in practice.
Link: https://lkml.kernel.org/r/20260119230133.3551867-7-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The only external caller of collapse_pte_mapped_thp() is uprobe, which
ignores the return value. Change the external API to return void to
simplify the interface.
Introduce try_collapse_pte_mapped_thp() for internal use that preserves
the return value. This prepares for future patch that will convert the
return type to use enum scan_result.
Link: https://lkml.kernel.org/r/20260118192253.9263-10-shivankg@amd.com
Signed-off-by: Shivank Garg <shivankg@amd.com>
Suggested-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Nico Pache <npache@redhat.com>
Reviewed-by: Nico Pache <npache@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
swap: fix race of truncate and swap entry split", needed for merging "mm,
swap: cleanup swap entry management workflow".
|
|
Implement fsession support in the arm64 BPF JIT trampoline.
Extend the trampoline stack layout to store function metadata and
session cookies, and pass the appropriate metadata to fentry and
fexit programs. This mirrors the existing x86 behavior and enables
session cookies on arm64.
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The added fsession does not prevent running on those architectures, that
haven't added fsession support.
For example, try to run fsession tests on arm64:
test_fsession_basic:PASS:fsession_test__open_and_load 0 nsec
test_fsession_basic:PASS:fsession_attach 0 nsec
check_result:FAIL:test_run_opts err unexpected error: -14 (errno 14)
In order to prevent such errors, add bpf_jit_supports_fsession() to guard
those architectures.
Fixes: 2d419c44658f ("bpf: add fsession support")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new feature flag UBLK_F_NO_AUTO_PART_SCAN to allow users to suppress
automatic partition scanning when starting a ublk device.
This is useful for some cases in which user don't want to scan
partitions.
Users still can manually trigger partition scanning later when appropriate
using standard tools (e.g., partprobe, blockdev --rereadpt).
Reported-by: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB63280C5637917C071C2F0D65A9A8A@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch introduces two new tracepoints for debug purpose.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The AX25_DAMA_MASTER option has been unimplemented and marked broken
ever since it was introduced in 2007 in commit 954b2e7f4c37 ("[NET]
AX.25 Kconfig and docs updates and fixes"). At this point, it is very
unlikely it will be implemented. Remove it.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260129080908.44710-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The malibox needs to be triggered by a 128bit atomic operation.
The reason is that the PF and VFs of the device share the mmio memory
of the mailbox, and the mutex cannot lock mailbox operations in
different functions, especially when passing through VFs to
virtual machines.
Currently, the write operation to the mailbox is already a 128-bit
atomic write. The read operation also needs to be modified to a
128-bit atomic read. Since there is no general 128-bit IO memory
access API in the current ARM64 architecture, and the stp and ldp
instructions do not guarantee atomic access to device memory, they
cannot be extracted as a general API. Therefore, the 128-bit atomic
read and write operations need to be implemented in the driver.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a new helper function crypto_skcipher_tested() which evaluates
the CRYPTO_ALG_TESTED flag from the tfm base cra_flags field.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Many WWAN modems come with embedded GNSS receiver inside and have a
dedicated port to output geopositioning data. On the one hand, the
GNSS receiver has little in common with WWAN modem and just shares a
host interface and should be exported using the GNSS subsystem. On the
other hand, GNSS receiver is not automatically activated and needs a
generic WWAN control port (AT, MBIM, etc.) to be turned on. And a user
space software needs extra information to find the control port.
Introduce the new type of WWAN port - NMEA. When driver asks to register
a NMEA port, the core allocates common parent WWAN device as usual, but
exports the NMEA port via the GNSS subsystem and acts as a proxy between
the device driver and the GNSS subsystem.
From the WWAN device driver perspective, a NMEA port is registered as a
regular WWAN port without any difference. And the driver interacts only
with the WWAN core. From the user space perspective, the NMEA port is a
GNSS device which parent can be used to enumerate and select the proper
control port for the GNSS receiver management.
CC: Slark Xiao <slark_xiao@163.com>
CC: Muhammad Nuzaihan <zaihan@unrealasia.net>
CC: Qiang Yu <quic_qianyu@quicinc.com>
CC: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
CC: Johan Hovold <johan@kernel.org>
Suggested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-6-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default, when a kmem_cache is created with SLAB_TYPESAFE_BY_RCU,
slub has to use extra storage for the freelist pointer after each
object, because slub assumes that any bit in the object
can be used by RCU readers.
Because proto_register() is also using SLAB_HWCACHE_ALIGN,
this forces slub to use one extra cache line per object.
We can instead put the slub freelist anywhere in the object,
granted the concurrent RCU readers are not supposed to
use the pointer value.
Add a new (struct sock)sk_freeptr field, in an union
with sk_rcu: No RCU readers would need to look at sk_rcu,
which is only used at free phase.
Tested:
grep . /sys/kernel/slab/TCP/{object_size,slab_size,objs_per_slab}
grep . /sys/kernel/slab/TCPv6/{object_size,slab_size,objs_per_slab}
Before:
/sys/kernel/slab/TCP/object_size:2368
/sys/kernel/slab/TCP/slab_size:2432
/sys/kernel/slab/TCP/objs_per_slab:13
/sys/kernel/slab/TCPv6/object_size:2496
/sys/kernel/slab/TCPv6/slab_size:2560
/sys/kernel/slab/TCPv6/objs_per_slab:12
After this patch, we can pack one more TCPv6 object per slab,
and object_size == slab_size.
/sys/kernel/slab/TCP/object_size:2368
/sys/kernel/slab/TCP/slab_size:2368
/sys/kernel/slab/TCP/objs_per_slab:13
/sys/kernel/slab/TCPv6/object_size:2496
/sys/kernel/slab/TCPv6/slab_size:2496
/sys/kernel/slab/TCPv6/objs_per_slab:13
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260129153458.4163797-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability, but
implement less than 64 address bits. This breaks on platforms where such
a device is assigned an MSI address higher than what's supported.
Currently, no_64bit_msi bit is set for these devices, meaning that only
32-bit MSI addresses are allowed for them. However, on some platforms the
MSI doorbell address is above the 32-bit limit but within the addressable
range of the device.
As a first step to enable MSI on those combinations of devices and
platforms, convert the boolean no_64bit_msi flag to a DMA mask and fixup
the affected usage sites:
- no_64bit_msi = 1 -> msi_addr_mask = DMA_BIT_MASK(32)
- no_64bit_msi = 0 -> msi_addr_mask = DMA_BIT_MASK(64)
- if (no_64bit_msi) -> if (msi_addr_mask < DMA_BIT_MASK(64))
Since no values other than DMA_BIT_MASK(32) and DMA_BIT_MASK(64) are used,
this is functionally equivalent.
This prepares for changing the binary decision between 32 and 64 bit to a
DMA mask based decision which allows to support systems which have a DMA
address space less than 64bit but a MSI doorbell address above the 32-bit
limit.
[ tglx: Massaged changelog ]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com> # ionic
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound
Link: https://patch.msgid.link/20260129-pci-msi-addr-mask-v4-1-70da998f2750@iscas.ac.cn
|
|
After system hibernation, I3C Dynamic Addresses may be reassigned at boot
and no longer match the values recorded before suspend. Introduce
i3c_master_do_daa_ext() to handle this situation.
The restore procedure is straightforward: issue a Reset Dynamic Address
Assignment (RSTDAA), then run the standard DAA sequence. The existing DAA
logic already supports detecting and updating devices whose dynamic
addresses differ from previously known values.
Refactor the DAA path by introducing a shared helper used by both the
normal i3c_master_do_daa() path and the new extended restore function,
and correct the kernel-doc in the process.
Export i3c_master_do_daa_ext() so that master drivers can invoke it from
their PM restore callbacks.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260123063325.8210-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
In order to do a user space stacktrace the current task needs to be a user
task that has executed in user space. It use to be possible to test if a
task is a user task or not by simply checking the task_struct mm field. If
it was non NULL, it was a user task and if not it was a kernel task.
But things have changed over time, and some kernel tasks now have their
own mm field.
An idea was made to instead test PF_KTHREAD and two functions were used to
wrap this check in case it became more complex to test if a task was a
user task or not[1]. But this was rejected and the C code simply checked
the PF_KTHREAD directly.
It was later found that not all kernel threads set PF_KTHREAD. The io-uring
helpers instead set PF_USER_WORKER and this needed to be added as well.
But checking the flags is still not enough. There's a very small window
when a task exits that it frees its mm field and it is set back to NULL.
If perf were to trigger at this moment, the flags test would say its a
user space task but when perf would read the mm field it would crash with
at NULL pointer dereference.
Now there are flags that can be used to test if a task is exiting, but
they are set in areas that perf may still want to profile the user space
task (to see where it exited). The only real test is to check both the
flags and the mm field.
Instead of making this modification in every location, create a new
is_user_task() helper function that does all the tests needed to know if
it is safe to read the user space memory or not.
[1] https://lore.kernel.org/all/20250425204120.639530125@goodmis.org/
Fixes: 90942f9fac05 ("perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL")
Closes: https://lore.kernel.org/all/0d877e6f-41a7-4724-875d-0b0a27b8a545@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260129102821.46484722@gandalf.local.home
|
|
Rework this code that was totally busted at least as of my most
recent changes. Introduce a separate list for delayed delegations
so that they can't get lost and don't clutter up the returns list.
Add a missing spin_unlock in the helper marking it as a regular
pending return.
Fixes: 0ebe655bd033 ("NFS: add a separate delegation return list")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The caller doesn't check the return value, so drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- important fix for ARM 32-bit based systems using cma= kernel
parameter (Oreoluwa Babatunde)
- a fix for the corner case of the DMA atomic pool based allocations
(Sai Sree Kartheek Adivi)
* tag 'dma-mapping-6.19-2026-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/pool: distinguish between missing and exhausted atomic pools
of: reserved_mem: Allow reserved_mem framework detect "cma=" kernel param
|
|
Allowing sleepable programs to use tail calls.
Making sure we can't mix sleepable and non-sleepable bpf programs
in tail call map (BPF_MAP_TYPE_PROG_ARRAY) and allowing it to be
used in sleepable programs.
Sleepable programs can be preempted and sleep which might bring
new source of race conditions, but both direct and indirect tail
calls should not be affected.
Direct tail calls work by patching direct jump to callee into bpf
caller program, so no problem there. We atomically switch from nop
to jump instruction.
Indirect tail call reads the callee from the map and then jumps to
it. The callee bpf program can't disappear (be released) from the
caller, because it is executed under rcu lock (rcu_read_lock_trace).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260130081208.1130204-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Compiling the NFSv4 module without any minorversion support doesn't make
much sense, so this patch sets NFS v4.1 as the default, always enabled
NFS version allowing us to replace all the CONFIG_NFS_V4_1s scattered
throughout the code with CONFIG_NFS_V4.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
At the same time, I move the NFS v4.0 functions into nfs40proc.c to keep
v4.0 features together in their own files.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.20
This pull request contains the interconnect changes for the 6.20-rc1
merge window. The core and driver changes are listed below.
Core changes:
- Add KUnit tests for core functionality
Driver changes:
- New driver for MediaTek MT8196 EMI
- MediaTek driver fixes
- Support for Glymur BWMONs
- QCS8300 driver topology fix
- Misc cleanups
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: msm8974: drop duplicated RPM_BUS_{MASTER,SLAVE}_REQ defines
interconnect: qcom: smd-rpm: drop duplicated QCOM_RPM_SMD_KEY_RATE define
dt-bindings: interconnect: qcom-bwmon: Document Glymur BWMONs
interconnect: qcom: qcs8300: fix the num_links for nsp icc node
interconnect: Add kunit tests for core functionality
dt-bindings: interconnect: qcom,qcs615-rpmh: Drop IPA interconnects
interconnect: mediatek: Aggregate bandwidth with saturating add
interconnect: mediatek: Don't hijack parent device
interconnect: mediatek: Add support for MediaTek MT8196 EMI ICC
dt-bindings: interconnect: mt8183-emi: Add support for MT8196 EMI
|
|
The definition of cpumask_of_node() in question is guarded by conflicting
CONFIG_NUMA and !CONFIG_NUMA checks, so remove it.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The current use of guard(preempt_notrace)() within __DECLARE_TRACE()
to protect invocation of __DO_TRACE_CALL() means that BPF programs
attached to tracepoints are non-preemptible. This is unhelpful in
real-time systems, whose users apparently wish to use BPF while also
achieving low latencies. (Who knew?)
One option would be to use preemptible RCU, but this introduces
many opportunities for infinite recursion, which many consider to
be counterproductive, especially given the relatively small stacks
provided by the Linux kernel. These opportunities could be shut down
by sufficiently energetic duplication of code, but this sort of thing
is considered impolite in some circles.
Therefore, use the shiny new SRCU-fast API, which provides somewhat faster
readers than those of preemptible RCU, at least on Paul E. McKenney's
laptop, where task_struct access is more expensive than access to per-CPU
variables. And SRCU-fast provides way faster readers than does SRCU,
courtesy of being able to avoid the read-side use of smp_mb(). Also,
it is quite straightforward to create srcu_read_{,un}lock_fast_notrace()
functions.
Link: https://lore.kernel.org/all/20250613152218.1924093-1-bigeasy@linutronix.de/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260126231256.499701982@kernel.org
Co-developed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In preparation to convert protection of tracepoints from being protected
by a preempt disabled section to being protected by SRCU, have all the
perf callbacks disable preemption as perf expects preemption to be
disabled when processing tracepoints.
While at it, convert the perf system call callback preempt_disable() to a
guard(preempt).
Link: https://lore.kernel.org/all/20250613152218.1924093-1-bigeasy@linutronix.de/
Link: https://patch.msgid.link/20260108220550.2f6638f3@fedora
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260126231256.174621257@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Introduce the helper function bdev_rot() to test if a block device is a
rotational one. The existing function bdev_nonrot() which tests for the
opposite condition is redefined using this new helper.
This avoids the double negation (operator and name) that appears when
testing if a block device is a rotational device, thus making the code a
little easier to read.
Call sites of bdev_nonrot() in the block layer are updated to use this
new helper. Remaining users in other subsystems are left unchanged for
now.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull the entry update to avoid merge conflicts with the time slice
extension changes.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
|
|
After switching ARM64 to the generic entry code, a syscall_exit_work()
appeared as a profiling hotspot because it is not inlined.
Inlining both syscall_trace_enter() and syscall_exit_work() provides a
performance gain when any of the work items is enabled. With audit enabled
this results in a ~4% performance gain for perf bench basic syscall on
a kunpeng920 system:
| Metric | Baseline | Inlined | Change |
| ---------- | ----------- | ----------- | ------ |
| Total time | 2.353 [sec] | 2.264 [sec] | ↓3.8% |
| usecs/op | 0.235374 | 0.226472 | ↓3.8% |
| ops/sec | 4,248,588 | 4,415,554 | ↑3.9% |
Small gains can be observed on x86 as well, though the generated code
optimizes for the work case, which is counterproductive for high
performance scenarios where such entry/exit work is usually avoided.
Avoid this by marking the work check in syscall_enter_from_user_mode_work()
unlikely, which is what the corresponding check in the exit path does
already.
[ tglx: Massage changelog and add the unlikely() ]
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128031934.3906955-14-ruanjinjie@huawei.com
|
|
ARM64 requires a architecture specific ptrace wrapper as it needs to save
and restore scratch registers.
Provide arch_ptrace_report_syscall_entry/exit() wrappers which fall back to
ptrace_report_syscall_entry/exit() if the architecture does not provide
them.
No functional change intended.
[ tglx: Massaged changelog and comments ]
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://patch.msgid.link/20260128031934.3906955-11-ruanjinjie@huawei.com
|
|
syscall_exit_to_user_mode_work() invokes local_irq_disable_exit_to_user()
and syscall_exit_to_user_mode_prepare() after handling pending syscall exit
work.
The conversion of ARM64 to the generic entry code requires this to be split
up, so move the invocations of local_irq_disable_exit_to_user() and
syscall_exit_to_user_mode_prepare() into the only caller.
No functional change intended.
[ tglx: Massaged changelog and comments ]
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20260128031934.3906955-10-ruanjinjie@huawei.com
|
|
The 'syscall' argument of syscall_trace_enter() is immediately overwritten
before any real use and serves only as a local variable, so drop the
parameter.
No functional change intended.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128031934.3906955-2-ruanjinjie@huawei.com
|
|
There are currently some pic32 MIPS drivers that are in tree, and are
only configured to be compiled on the pic32 platform. There's a risk of
breaking some of these drivers when migrating drivers away from legacy
APIs. It happened to me with a pic32 clk driver.
Let's go ahead and copy the MIPS pic32.h header to
include/linux/platform_data/, and make a minor update to allow compiling
this on other architectures. This will make it easier, and cleaner to
enable COMPILE_TEST for some of these pic32 drivers.
The asm variant of the header file will be dropped once all drivers have
been updated.
Link: https://lore.kernel.org/linux-clk/CABx5tq+eOocJ41X-GSgkGy6S+s+Am1yCS099wqP695NtwALTmg@mail.gmail.com/T/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add support for ML-DSA keys and signatures to the CMS/PKCS#7 and X.509
implementations. ML-DSA-44, -65 and -87 are all supported. For X.509
certificates, the TBSCertificate is required to be signed directly; for
CMS, direct signing of the data is preferred, though use of SHA512 (and
only that) as an intermediate hash of the content is permitted with
signedAttrs.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
|
|
Allow the data to be verified in a PKCS#7 or CMS message to be passed
directly to an asymmetric cipher algorithm (e.g. ML-DSA) if it wants to do
whatever passes for hashing/digestion itself. The normal digestion of the
data is then skipped as that would be ignored unless another signed info in
the message has some other algorithm that needs it.
The 'data to be verified' may be the content of the PKCS#7 message or it
will be the authenticatedAttributes (signedAttrs if CMS), modified, if
those are present.
This is done by:
(1) Make ->m and ->m_size point to the data to be verified rather than
making public_key_verify_signature() access the data directly. This
is so that keyctl(KEYCTL_PKEY_VERIFY) will still work.
(2) Add a flag, ->algo_takes_data, to indicate that the verification
algorithm wants to access the data to be verified directly rather than
having it digested first.
(3) If the PKCS#7 message has authenticatedAttributes (or CMS
signedAttrs), then the digest contained therein will be validated as
now, and the modified attrs blob will either be digested or assigned
to ->m as appropriate.
(4) If present, always copy and modify the authenticatedAttributes (or
signedAttrs) then digest that in one go rather than calling the shash
update twice (once for the tag and once for the rest).
(5) For ML-DSA, point ->m to the TBSCertificate instead of digesting it
and using the digest.
Note that whilst ML-DSA does allow for an "external mu", CMS doesn't yet
have that standardised.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
|
|
Rename ->digest and ->digest_len to ->m and ->m_size to represent the input
to the signature verification algorithm, reflecting that ->digest may no
longer actually *be* a digest.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
|
|
Now that there is support for creating a GICv5-based guest with KVM,
check that the hardware itself supports virtualisation, skipping the
setting of struct gic_kvm_info if not.
Note: If native GICv5 virt is not supported, then nor is
FEAT_GCIE_LEGACY, so we are able to skip altogether.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-33-sascha.bischoff@arm.com
[maz: cosmetic changes]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Current sequences are limited to 192 bytes. Increase support to whatever
the EC support. If the sequence is too long, the EC will return an
OVERFLOW error.
Test: Check sending a large sequence is received by the EC.
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Link: https://lore.kernel.org/r/20260130081351.487517-2-gwendal@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Add attribue `num_segments` to return the number of exposed LED segments
in the lightbar. It can be smaller than the number of physical leds in
the lightbar.
Test: Check the attribute is present and returns a value when read.
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Link: https://lore.kernel.org/r/20260130081351.487517-1-gwendal@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
The wrapping key does not exist by default and is generated by the
hypervisor as a part of PKWM initialization. This key is then persisted by
the hypervisor and is used to wrap trusted keys. These are variable length
symmetric keys, which in the case of PowerVM Key Wrapping Module (PKWM) are
generated using the kernel RNG. PKWM can be used as a trust source through
the following example keyctl commands:
keyctl add trusted my_trusted_key "new 32" @u
Use the wrap_flags command option to set the secure boot requirement for
the wrapping request through the following keyctl commands
case1: no secure boot requirement. (default)
keyctl usage: keyctl add trusted my_trusted_key "new 32" @u
OR
keyctl add trusted my_trusted_key "new 32 wrap_flags=0x00" @u
case2: secure boot required to in either audit or enforce mode. set bit 0
keyctl usage: keyctl add trusted my_trusted_key "new 32 wrap_flags=0x01" @u
case3: secure boot required to be in enforce mode. set bit 1
keyctl usage: keyctl add trusted my_trusted_key "new 32 wrap_flags=0x02" @u
NOTE:
-> Setting the secure boot requirement is NOT a must.
-> Only either of the secure boot requirement options should be set. Not
both.
-> All the other bits are required to be not set.
-> Set the kernel parameter trusted.source=pkwm to choose PKWM as the
backend for trusted keys implementation.
-> CONFIG_PSERIES_PLPKS must be enabled to build PKWM.
Add PKWM, which is a combination of IBM PowerVM and Power LPAR Platform
KeyStore, as a new trust source for trusted keys.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-6-ssrish@linux.ibm.com
|
