summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2016-09-22kbuild: -ffunction-sections fix for archs with conflicting sectionsNicholas Piggin1-5/+10
Enabling -ffunction-sections modified the generic linker script to pull .text.* sections into regular TEXT_TEXT section, conflicting with some architectures. Revert that change and require archs that enable the option to ensure they have no conflicting section names, and do the appropriate merging. Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Fixes: b67067f1176d ("kbuild: allow archs to select link dead code/data elimination") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-09-09kbuild: allow archs to select link dead code/data eliminationNicholas Piggin4-63/+80
Introduce LD_DEAD_CODE_DATA_ELIMINATION option for architectures to select to build with -ffunction-sections, -fdata-sections, and link with --gc-sections. It requires some work (documented) to ensure all unreferenced entrypoints are live, and requires toolchain and build verification, so it is made a per-arch option for now. On a random powerpc64le build, this yelds a significant size saving, it boots and runs fine, but there is a lot I haven't tested as yet, so these savings may be reduced if there are bugs in the link. text data bss dec filename 11169741 1180744 1923176 14273661 vmlinux 10445269 1004127 1919707 13369103 vmlinux.dce ~700K text, ~170K data, 6% removed from kernel image size. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-08EXPORT_SYMBOL() for asmAl Viro1-0/+94
Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-08-08Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds8-37/+37
Pull more block fixes from Jens Axboe: "As mentioned in the pull the other day, a few more fixes for this round, all related to the bio op changes in this series. Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I wanted to do that change right after or right before -rc1, so that risk of conflict was reduced. I just rebased the series on top of current master, and no new ->bi_rw usage has snuck in" * 'for-linus' of git://git.kernel.dk/linux-block: block: rename bio bi_rw to bi_opf target: iblock_execute_sync_cache() should use bio_set_op_attrs() mm: make __swap_writepage() use bio_set_op_attrs() block/mm: make bdev_ops->rw_page() take a bool for read/write
2016-08-08Merge tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-0/+20
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
2016-08-07block: rename bio bi_rw to bi_opfJens Axboe5-22/+23
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07block/mm: make bdev_ops->rw_page() take a bool for read/writeJens Axboe4-15/+14
Commit abf545484d31 changed it from an 'rw' flags type to the newer ops based interface, but now we're effectively leaking some bdev internals to the rest of the kernel. Since we only care about whether it's a read or a write at that level, just pass in a bool 'is_write' parameter instead. Then we can also move op_is_write() and friends back under CONFIG_BLOCK protection. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07Merge branch 'for-linus-2' of ↵Linus Torvalds2-6/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted cleanups and fixes. In the "trivial API change" department - ->d_compare() losing 'parent' argument" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cachefiles: Fix race between inactivating and culling a cache object 9p: use clone_fid() 9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()" vfs: make dentry_needs_remove_privs() internal vfs: remove file_needs_remove_privs() vfs: fix deadlock in file_remove_privs() on overlayfs get rid of 'parent' argument of ->d_compare() cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare() affs ->d_compare(): don't bother with ->d_inode fold _d_rehash() and __d_rehash() together fold dentry_rcuwalk_invalidate() into its only remaining caller
2016-08-06Merge branch 'work.const-qstr' of ↵Linus Torvalds4-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull qstr constification updates from Al Viro: "Fairly self-contained bunch - surprising lot of places passes struct qstr * as an argument when const struct qstr * would suffice; it complicates analysis for no good reason. I'd prefer to feed that separately from the assorted fixes (those are in #for-linus and with somewhat trickier topology)" * 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qstr: constify instances in adfs qstr: constify instances in lustre qstr: constify instances in f2fs qstr: constify instances in ext2 qstr: constify instances in vfat qstr: constify instances in procfs qstr: constify instances in fuse qstr constify instances in fs/dcache.c qstr: constify instances in nfs qstr: constify instances in ocfs2 qstr: constify instances in autofs4 qstr: constify instances in hfs qstr: constify instances in hfsplus qstr: constify instances in logfs qstr: constify dentry_init_security
2016-08-06Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds9-1/+455
Pull virtio/vhost updates from Michael Tsirkin: - new vsock device support in host and guest - platform IOMMU support in host and guest, including compatibility quirks for legacy systems. - misc fixes and cleanups. * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: VSOCK: Use kvfree() vhost: split out vringh Kconfig vhost: detect 32 bit integer wrap around vhost: new device IOTLB API vhost: drop vringh dependency vhost: convert pre sorted vhost memory array to interval tree vhost: introduce vhost memory accessors VSOCK: Add Makefile and Kconfig VSOCK: Introduce vhost_vsock.ko VSOCK: Introduce virtio_transport.ko VSOCK: Introduce virtio_vsock_common.ko VSOCK: defer sock removal to transports VSOCK: transport-specific vsock_transport functions vhost: drop vringh dependency vop: pull in vhost Kconfig virtio: new feature to detect IOMMU device quirk balloon: check the number of available pages in leak balloon vhost: lockless enqueuing vhost: simplify work flushing
2016-08-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-4/+20
Pull more KVM updates from Paolo Bonzini: - ARM bugfix and MSI injection support - x86 nested virt tweak and OOPS fix - Simplify pvclock code (vdso bits acked by Andy Lutomirski). * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: nvmx: mark ept single context invalidation as supported nvmx: remove comment about missing nested vpid support KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off KVM: documentation: fix KVM_CAP_X2APIC_API information x86: vdso: use __pvclock_read_cycles pvclock: introduce seqcount-like API arm64: KVM: Set cpsr before spsr on fault injection KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype KVM: arm/arm64: Enable MSI routing KVM: arm/arm64: Enable irqchip routing KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header KVM: irqchip: Convey devid to kvm_set_msi KVM: Add devid in kvm_kernel_irq_routing_entry KVM: api: Pass the devid in the msi routing entry
2016-08-06Merge tag 'pwm/for-4.8-rc1' of ↵Linus Torvalds3-1/+158
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes improve some aspects of the atomic API as well as make use of this new API in the regulator framework to allow properly dealing with critical regulators controlled by a PWM. Aside from that there's a bunch of updates and cleanups for existing drivers, as well as the addition of new drivers for the Broadcom iProc, STMPE and ChromeOS EC controllers" * tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits) regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range regulator: pwm: Support extra continuous mode cases pwm: Add ChromeOS EC PWM driver dt-bindings: pwm: Add binding for ChromeOS EC PWM mfd: cros_ec: Add EC_PWM function definitions mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper pwm: atmel: Use of_device_get_match_data() pwm: atmel: Fix checkpatch warnings pwm: atmel: Fix disabling of PWM channels dt-bindings: pwm: Add R-Car H3 device tree bindings pwm: rcar: Use ARCH_RENESAS pwm: tegra: Add support for Tegra186 dt-bindings: pwm: tegra: Add compatible string for Tegra186 pwm: tegra: Avoid overflow when calculating duty cycle pwm: tegra: Allow 100 % duty cycle pwm: tegra: Add support for reset control pwm: tegra: Rename mmio_base to regs pwm: tegra: Remove useless padding pwm: tegra: Drop NUM_PWM macro pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value ...
2016-08-06Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds7-15/+20
Pull block fixes from Jens Axboe: "Here's the second round of block updates for this merge window. It's a mix of fixes for changes that went in previously in this round, and fixes in general. This pull request contains: - Fixes for loop from Christoph - A bdi vs gendisk lifetime fix from Dan, worth two cookies. - A blk-mq timeout fix, when on frozen queues. From Gabriel. - Writeback fix from Jan, ensuring that __writeback_single_inode() does the right thing. - Fix for bio->bi_rw usage in f2fs from me. - Error path deadlock fix in blk-mq sysfs registration from me. - Floppy O_ACCMODE fix from Jiri. - Fix to the new bio op methods from Mike. One more followup will be coming here, ensuring that we don't propagate the block types outside of block. That, and a rename of bio->bi_rw is coming right after -rc1 is cut. - Various little fixes" * 'for-linus' of git://git.kernel.dk/linux-block: mm/block: convert rw_page users to bio op use loop: make do_req_filebacked more robust loop: don't try to use AIO for discards blk-mq: fix deadlock in blk_mq_register_disk() error path Include: blkdev: Removed duplicate 'struct request;' declaration. Fixup direct bi_rw modifiers block: fix bdi vs gendisk lifetime mismatch blk-mq: Allow timeouts to run while queue is freezing nbd: fix race in ioctl block: fix use-after-free in seq file f2fs: drop bio->bi_rw manual assignment block: add missing group association in bio-cloning functions blkcg: kill unused field nr_undestroyed_grps writeback: Write dirty times for WB_SYNC_ALL writeback floppy: fix open(O_ACCMODE) for ioctl-only open
2016-08-06Merge branch 'for-linus' of ↵Linus Torvalds2-11/+19
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "Two new drivers for touchscreen controllers: - Silead touchscreen controllers - SiS 9200 family touchscreen controllers and a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: silead - remove some dead code Input: sis-i2c - select CONFIG_CRC_ITU_T Input: add driver for SiS 9200 family I2C touchscreen controllers Input: ili210x - fix permissions on "calibrate" attribute Input: elan_i2c - properly wake up touchpad on ASUS laptops Input: add driver for Silead touchscreens Input: elantech - fix debug dump of the current packet Input: rotary_encoder - support binary encoding of states Input: xpad - power off wireless 360 controllers on suspend Input: i8042 - break load dependency between atkbd/psmouse and i8042 Input: synaptics-rmi4 - do not check for NULL when calling of_node_put() Input: cros_ec_keyb - cleanup use of dev
2016-08-05Merge tag 'rtc-4.8' of ↵Linus Torvalds7-313/+5
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC for 4.8 Cleanups: - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc - move mn10300 to rtc-cmos Subsystem: - fix wakealarms after hibernate - multiples fixes for rctest - simplify implementations of .read_alarm New drivers: - Maxim MAX6916 Drivers: - ds1307: fix weekday - m41t80: add wakeup support - pcf85063: add support for PCF85063A variant - rv8803: extend i2c fix and other fixes - s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP TS-41x - s3c: clock fixes" * tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits) rtc: rv8803: Clear V1F when setting the time rtc: rv8803: Stop the clock while setting the time rtc: rv8803: Always apply the I²C workaround rtc: rv8803: Fix read day of week rtc: rv8803: Remove the check for valid time rtc: rv8803: Kconfig: Indicate rx8900 support rtc: asm9260: remove .owner field for driver rtc: at91sam9: Fix missing spin_lock_init() rtc: m41t80: add suspend handlers for alarm IRQ rtc: m41t80: make it a real error message rtc: pcf85063: Add support for the PCF85063A device rtc: pcf85063: fix year range rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy rtc: explicitly set tm_sec = 0 for drivers with minute accurancy rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() rtc: s3c: Remove unnecessary call to disable already disabled clock rtc: abx80x: use devm_add_action_or_reset() rtc: m41t80: use devm_add_action_or_reset() rtc: fix a typo and reduce three empty lines to one rtc: s35390a: improve two comments in .set_alarm ...
2016-08-05Merge tag 'powerpc-4.8-2' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "These were delayed for various reasons, so I let them sit in next a bit longer, rather than including them in my first pull request. Fixes: - Fix early access to cpu_spec relocation from Benjamin Herrenschmidt - Fix incorrect event codes in power9-event-list from Madhavan Srinivasan - Move register_process_table() out of ppc_md from Michael Ellerman Use jump_label use for [cpu|mmu]_has_feature(): - Add mmu_early_init_devtree() from Michael Ellerman - Move disable_radix handling into mmu_early_init_devtree() from Michael Ellerman - Do hash device tree scanning earlier from Michael Ellerman - Do radix device tree scanning earlier from Michael Ellerman - Do feature patching before MMU init from Michael Ellerman - Check features don't change after patching from Michael Ellerman - Make MMU_FTR_RADIX a MMU family feature from Aneesh Kumar K.V - Convert mmu_has_feature() to returning bool from Michael Ellerman - Convert cpu_has_feature() to returning bool from Michael Ellerman - Define radix_enabled() in one place & use static inline from Michael Ellerman - Add early_[cpu|mmu]_has_feature() from Michael Ellerman - Convert early cpu/mmu feature check to use the new helpers from Aneesh Kumar K.V - jump_label: Make it possible for arches to invoke jump_label_init() earlier from Kevin Hao - Call jump_label_init() in apply_feature_fixups() from Aneesh Kumar K.V - Remove mfvtb() from Kevin Hao - Move cpu_has_feature() to a separate file from Kevin Hao - Add kconfig option to use jump labels for cpu/mmu_has_feature() from Michael Ellerman - Add option to use jump label for cpu_has_feature() from Kevin Hao - Add option to use jump label for mmu_has_feature() from Kevin Hao - Catch usage of cpu/mmu_has_feature() before jump label init from Aneesh Kumar K.V - Annotate jump label assembly from Michael Ellerman TLB flush enhancements from Aneesh Kumar K.V: - radix: Implement tlb mmu gather flush efficiently - Add helper for finding SLBE LLP encoding - Use hugetlb flush functions - Drop multiple definition of mm_is_core_local - radix: Add tlb flush of THP ptes - radix: Rename function and drop unused arg - radix/hugetlb: Add helper for finding page size - hugetlb: Add flush_hugetlb_tlb_range - remove flush_tlb_page_nohash Add new ptrace regsets from Anshuman Khandual and Simon Guo: - elf: Add powerpc specific core note sections - Add the function flush_tmregs_to_thread - Enable in transaction NT_PRFPREG ptrace requests - Enable in transaction NT_PPC_VMX ptrace requests - Enable in transaction NT_PPC_VSX ptrace requests - Adapt gpr32_get, gpr32_set functions for transaction - Enable support for NT_PPC_CGPR - Enable support for NT_PPC_CFPR - Enable support for NT_PPC_CVMX - Enable support for NT_PPC_CVSX - Enable support for TM SPR state - Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR - Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR - Enable support for EBB registers - Enable support for Performance Monitor registers" * tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits) powerpc/mm: Move register_process_table() out of ppc_md powerpc/perf: Fix incorrect event codes in power9-event-list powerpc/32: Fix early access to cpu_spec relocation powerpc/ptrace: Enable support for Performance Monitor registers powerpc/ptrace: Enable support for EBB registers powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR powerpc/ptrace: Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR powerpc/ptrace: Enable support for TM SPR state powerpc/ptrace: Enable support for NT_PPC_CVSX powerpc/ptrace: Enable support for NT_PPC_CVMX powerpc/ptrace: Enable support for NT_PPC_CFPR powerpc/ptrace: Enable support for NT_PPC_CGPR powerpc/ptrace: Adapt gpr32_get, gpr32_set functions for transaction powerpc/ptrace: Enable in transaction NT_PPC_VSX ptrace requests powerpc/ptrace: Enable in transaction NT_PPC_VMX ptrace requests powerpc/ptrace: Enable in transaction NT_PRFPREG ptrace requests powerpc/process: Add the function flush_tmregs_to_thread elf: Add powerpc specific core note sections powerpc/mm: remove flush_tlb_page_nohash powerpc/mm/hugetlb: Add flush_hugetlb_tlb_range ...
2016-08-05Merge tag 'for-linus-2' of ↵Linus Torvalds6-27/+97
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull second round of rdma updates from Doug Ledford: "This can be split out into just two categories: - fixes to the RDMA R/W API in regards to SG list length limits (about 5 patches) - fixes/features for the Intel hfi1 driver (everything else) The hfi1 driver is still being brought to full feature support by Intel, and they have a lot of people working on it, so that amounts to almost the entirety of this pull request" * tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (84 commits) IB/hfi1: Add cache evict LRU list IB/hfi1: Fix memory leak during unexpected shutdown IB/hfi1: Remove unneeded mm argument in remove function IB/hfi1: Consistently call ops->remove outside spinlock IB/hfi1: Use evict mmu rb operation IB/hfi1: Add evict operation to the mmu rb handler IB/hfi1: Fix TID caching actions IB/hfi1: Make the cache handler own its rb tree root IB/hfi1: Make use of mm consistent IB/hfi1: Fix user SDMA racy user request claim IB/hfi1: Fix error condition that needs to clean up IB/hfi1: Release node on insert failure IB/hfi1: Validate SDMA user iovector count IB/hfi1: Validate SDMA user request index IB/hfi1: Use the same capability state for all shared contexts IB/hfi1: Prevent null pointer dereference IB/hfi1: Rename TID mmu_rb_* functions IB/hfi1: Remove unneeded empty check in hfi1_mmu_rb_unregister() IB/hfi1: Restructure hfi1_file_open IB/hfi1: Make iovec loop index easy to understand ...
2016-08-05Merge tag 'for-linus' of ↵Linus Torvalds12-8/+404
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull base rdma updates from Doug Ledford: "Round one of 4.8 code: while this is mostly normal, there is a new driver in here (the driver was hosted outside the kernel for several years and is actually a fairly mature and well coded driver). It amounts to 13,000 of the 16,000 lines of added code in here. Summary: - Updates/fixes for iw_cxgb4 driver - Updates/fixes for mlx5 driver - Add flow steering and RSS API - Add hardware stats to mlx4 and mlx5 drivers - Add firmware version API for RDMA driver use - Add the rxe driver (this is a software RoCE driver that makes any Ethernet device a RoCE device) - Fixes for i40iw driver - Support for send only multicast joins in the cma layer - Other minor fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (72 commits) Soft RoCE driver IB/core: Support for CMA multicast join flags IB/sa: Add cached attribute containing SM information to SA port IB/uverbs: Fix race between uverbs_close and remove_one IB/mthca: Clean up error unwind flow in mthca_reset() IB/mthca: NULL arg to pci_dev_put is OK IB/hfi1: NULL arg to sc_return_credits is OK IB/mlx4: Add diagnostic hardware counters net/mlx4: Query performance and diagnostics counters net/mlx4: Add diagnostic counters capability bit Use smaller 512 byte messages for portmapper messages IB/ipoib: Report SG feature regardless of HW UD CSUM capability IB/mlx4: Don't use GFP_ATOMIC for CQ resize struct IB/hfi1: Disable by default IB/rdmavt: Disable by default IB/mlx5: Fix port counter ID association to QP offset IB/mlx5: Fix iteration overrun in GSI qps i40iw: Add NULL check for puda buffer i40iw: Change dup_ack_thresh to u8 i40iw: Remove unnecessary check for moving CQ head ...
2016-08-05Merge branch 'for-next' of ↵Linus Torvalds4-2/+222
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The most notable item is IBM virtual SCSI target driver, that was originally ported to target-core back in 2010 by Tomo-san, and has been brought forward to v4.x code by Bryant Ly, Michael Cyr and co over the last months. Also included are two ORDERED task related bug-fixes Bryant + Michael found along the way using ibmvscsis with AIX guests, plus a few miscellaneous target-core + iscsi-target bug-fixes with associated stable tags" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: fix spelling mistake: "limitiation" -> "limitation" target: Fix residual overflow handling in target_complete_cmd_with_length tcm_fc: set and unset FCP_SPPF_TARG_FCN iscsi-target: Fix panic when adding second TCP connection to iSCSI session ibmvscsis: Initial commit of IBM VSCSI Tgt Driver target: Fix ordered task CHECK_CONDITION early exception handling target: Fix ordered task target_setup_cmd_from_cdb exception hang target: Fix max_unmap_lba_count calc overflow target: Fix race between iscsi-target connection shutdown + ABORT_TASK target: Fix missing complete during ABORT_TASK + CMD_T_FABRIC_STOP
2016-08-05Merge tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linuxLinus Torvalds6-28/+117
Pull nfsd updates from Bruce Fields: "Highlights: - Trond made a change to the server's tcp logic that allows a fast client to better take advantage of high bandwidth networks, but may increase the risk that a single client could starve other clients; a new sunrpc.svc_rpc_per_connection_limit parameter should help mitigate this in the (hopefully unlikely) event this becomes a problem in practice. - Tom Haynes added a minimal flex-layout pnfs server, which is of no use in production for now--don't build it unless you're doing client testing or further server development" * tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux: (32 commits) nfsd: remove some dead code in nfsd_create_locked() nfsd: drop unnecessary MAY_EXEC check from create nfsd: clean up bad-type check in nfsd_create_locked nfsd: remove unnecessary positive-dentry check nfsd: reorganize nfsd_create nfsd: check d_can_lookup in fh_verify of directories nfsd: remove redundant zero-length check from create nfsd: Make creates return EEXIST instead of EACCES SUNRPC: Detect immediate closure of accepted sockets SUNRPC: accept() may return sockets that are still in SYN_RECV nfsd: allow nfsd to advertise multiple layout types nfsd: Close race between nfsd4_release_lockowner and nfsd4_lock nfsd/blocklayout: Make sure calculate signature/designator length aligned xfs: abstract block export operations from nfsd layouts SUNRPC: Remove unused callback xpo_adjust_wspace() SUNRPC: Change TCP socket space reservation SUNRPC: Add a server side per-connection limit SUNRPC: Micro optimisation for svc_data_ready SUNRPC: Call the default socket callbacks instead of open coding SUNRPC: lock the socket while detaching it ...
2016-08-05Merge branch 'for-linus-4.8' of ↵Linus Torvalds2-137/+160
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull more btrfs updates from Chris Mason: "This is part two of my btrfs pull, which is some cleanups and a batch of fixes. Most of the code here is from Jeff Mahoney, making the pointers we pass around internally more consistent and less confusing overall. I noticed a small problem right before I sent this out yesterday, so I fixed it up and re-tested overnight" * 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (40 commits) Btrfs: fix __MAX_CSUM_ITEMS btrfs: btrfs_abort_transaction, drop root parameter btrfs: add btrfs_trans_handle->fs_info pointer btrfs: btrfs_relocate_chunk pass extent_root to btrfs_end_transaction btrfs: convert nodesize macros to static inlines btrfs: introduce BTRFS_MAX_ITEM_SIZE btrfs: cleanup, remove prototype for btrfs_find_root_ref btrfs: copy_to_sk drop unused root parameter btrfs: simpilify btrfs_subvol_inherit_props btrfs: tests, use BTRFS_FS_STATE_DUMMY_FS_INFO instead of dummy root btrfs: tests, require fs_info for root btrfs: tests, move initialization into tests/ btrfs: btrfs_test_opt and friends should take a btrfs_fs_info btrfs: prefix fsid to all trace events btrfs: plumb fs_info into btrfs_work btrfs: remove obsolete part of comment in statfs btrfs: hide test-only member under ifdef btrfs: Ratelimit "no csum found" info message btrfs: Add ratelimit to btrfs printing Btrfs: fix unexpected balance crash due to BUG_ON ...
2016-08-05Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: "This series is all about Nicolas flat format support for MMU systems. Traditional m68k no-MMU flat format binaries can now be run on m68k MMU enabled systems too. The series includes some nice cleanups of the binfmt_flat code and converts it to using proper user space accessor functions. With all this in place you can boot and run a complete no-MMU flat format based user space on an MMU enabled system" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: enable binfmt_flat on systems with an MMU binfmt_flat: allow compressed flat binary format to work on MMU systems binfmt_flat: add MMU-specific support binfmt_flat: update libraries' data segment pointer with userspace accessors binfmt_flat: use clear_user() rather than memset() to clear .bss binfmt_flat: use proper user space accessors with old relocs code binfmt_flat: use proper user space accessors with relocs processing code binfmt_flat: clean up create_flat_tables() and stack accesses binfmt_flat: use generic transfer_args_to_stack() elf_fdpic_transfer_args_to_stack(): make it generic binfmt_flat: prevent kernel dammage from corrupted executable headers binfmt_flat: convert printk invocations to their modern form binfmt_flat: assorted cleanups m68k: use same start_thread() on MMU and no-MMU m68k: fix file path comment m68k: fix bFLT executable running on MMU enabled systems
2016-08-04mm/block: convert rw_page users to bio op useMike Christie4-14/+15
The rw_page users were not converted to use bio/req ops. As a result bdev_write_page is not passing down REQ_OP_WRITE and the IOs will be sent down as reads. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixes: 4e1b2d52a80d ("block, fs, drivers: remove REQ_OP compat defs and related code") Modified by me to: 1) Drop op_flags passing into ->rw_page(), as we don't use it. 2) Make op_is_write() and friends safe to use for !CONFIG_BLOCK Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04Include: blkdev: Removed duplicate 'struct request;' declaration.John Pittman1-1/+0
In include/linux/blkdev.h duplicate declarations of the request struct exist. Cleaned up by removing the second, unneeded declaration. Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04block: fix bdi vs gendisk lifetime mismatchDan Williams2-0/+2
The name for a bdi of a gendisk is derived from the gendisk's devt. However, since the gendisk is destroyed before the bdi it leaves a window where a new gendisk could dynamically reuse the same devt while a bdi with the same name is still live. Arrange for the bdi to hold a reference against its "owner" disk device while it is registered. Otherwise we can hit sysfs duplicate name collisions like the following: WARNING: CPU: 10 PID: 2078 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80 sysfs: cannot create duplicate filename '/devices/virtual/bdi/259:1' Hardware name: HP ProLiant DL580 Gen8, BIOS P79 05/06/2015 0000000000000286 0000000002c04ad5 ffff88006f24f970 ffffffff8134caec ffff88006f24f9c0 0000000000000000 ffff88006f24f9b0 ffffffff8108c351 0000001f0000000c ffff88105d236000 ffff88105d1031e0 ffff8800357427f8 Call Trace: [<ffffffff8134caec>] dump_stack+0x63/0x87 [<ffffffff8108c351>] __warn+0xd1/0xf0 [<ffffffff8108c3cf>] warn_slowpath_fmt+0x5f/0x80 [<ffffffff812a0d34>] sysfs_warn_dup+0x64/0x80 [<ffffffff812a0e1e>] sysfs_create_dir_ns+0x7e/0x90 [<ffffffff8134faaa>] kobject_add_internal+0xaa/0x320 [<ffffffff81358d4e>] ? vsnprintf+0x34e/0x4d0 [<ffffffff8134ff55>] kobject_add+0x75/0xd0 [<ffffffff816e66b2>] ? mutex_lock+0x12/0x2f [<ffffffff8148b0a5>] device_add+0x125/0x610 [<ffffffff8148b788>] device_create_groups_vargs+0xd8/0x100 [<ffffffff8148b7cc>] device_create_vargs+0x1c/0x20 [<ffffffff811b775c>] bdi_register+0x8c/0x180 [<ffffffff811b7877>] bdi_register_dev+0x27/0x30 [<ffffffff813317f5>] add_disk+0x175/0x4a0 Cc: <stable@vger.kernel.org> Reported-by: Yi Zhang <yizhan@redhat.com> Tested-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Fixed up missing 0 return in bdi_register_owner(). Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04block: add missing group association in bio-cloning functionsPaolo Valente1-0/+3
When a bio is cloned, the newly created bio must be associated with the same blkcg as the original bio (if BLK_CGROUP is enabled). If this operation is not performed, then the new bio is not associated with any group, and the group of the current task is returned when the group of the bio is requested. Depending on the cloning frequency, this may cause a large percentage of the bios belonging to a given group to be treated as if belonging to other groups (in most cases as if belonging to the root group). The expected group isolation may thereby be broken. This commit adds the missing association in bio-cloning functions. Fixes: da2f0f74cf7d ("Btrfs: add support for blkio controllers") Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Reviewed-by: Nikolay Borisov <kernel@kyup.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04Merge branches 'misc' and 'rxe' into k.o/for-4.8-1Doug Ledford6-2/+176
2016-08-04Soft RoCE driverMoni Shoua2-0/+145
Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-04Merge tag 'modules-next-for-linus' of ↵Linus Torvalds3-29/+41
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "The only interesting thing here is Jessica's patch to add ro_after_init support to modules. The rest are all trivia" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: extable.h: add stddef.h so "NULL" definition is not implicit modules: add ro_after_init support jump_label: disable preemption around __module_text_address(). exceptions: fork exception table content from module.h into extable.h modules: Add kernel parameter to blacklist modules module: Do a WARN_ON_ONCE() for assert module mutex not held Documentation/module-signing.txt: Note need for version info if reusing a key module: Invalidate signatures on force-loaded modules module: Issue warnings when tainting kernel module: fix redundant test. module: fix noreturn attribute for __module_put_and_exit()
2016-08-04dynamic_debug: add jump label supportJason Baron1-6/+54
Although dynamic debug is often only used for debug builds, sometimes its enabled for production builds as well. Minimize its impact by using jump labels. This reduces the text section by 7000+ bytes in the kernel image below. It does increase data, but this should only be referenced when changing the direction of the branches, and hence usually not in cache. text data bss dec hex filename 8194852 4879776 925696 14000324 d5a0c4 vmlinux.pre 8187337 4960224 925696 14073257 d6bda9 vmlinux.post Link: http://lkml.kernel.org/r/d165b465e8c89bc582d973758d40be44c33f018b.1467837322.git.jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04jump_label: remove bug.h, atomic.h dependencies for HAVE_JUMP_LABELJason Baron1-23/+23
The current jump_label.h includes bug.h for things such as WARN_ON(). This makes the header problematic for inclusion by kernel.h or any headers that kernel.h includes, since bug.h includes kernel.h (circular dependency). The inclusion of atomic.h is similarly problematic. Thus, this should make jump_label.h 'includable' from most places. Link: http://lkml.kernel.org/r/7060ce35ddd0d20b33bf170685e6b0fab816bdf2.1467837322.git.jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski8-142/+110
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04include/linux/bitmap.h: cleanupAndrew Morton1-4/+3
Remove two unneeded `else's. Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04tree-wide: replace config_enabled() with IS_ENABLED()Masahiro Yamada2-3/+3
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04Merge tag 'kvm-arm-for-4.8-take2' of ↵Paolo Bonzini3-4/+20
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Changes for v4.8 - Take 2 Includes GSI routing support to go along with the new VGIC and a small fix that has been cooking in -next for a while.
2016-08-04Merge branches 'hfi1' and 'sge-limit' into k.o/for-4.8-2Doug Ledford1-0/+6
2016-08-04IB/core: Support for CMA multicast join flagsAlex Vesker3-2/+24
Added UCMA and CMA support for multicast join flags. Flags are passed using UCMA CM join command previously reserved fields. Currently supporting two join flags indicating two different multicast JoinStates: 1. Full Member: The initiator creates the Multicast group(MCG) if it wasn't previously created, can send Multicast messages to the group and receive messages from the MCG. 2. Send Only Full Member: The initiator creates the Multicast group(MCG) if it wasn't previously created, can send Multicast messages to the group but doesn't receive any messages from the MCG. IB: Send Only Full Member requires a query of ClassPortInfo to determine if SM/SA supports this option. If SM/SA doesn't support Send-Only there will be no join request sent and an error will be returned. ETH: When Send Only Full Member is requested no IGMP join will be sent. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-04IB/mlx4: Add diagnostic hardware countersMark Bloch1-0/+3
Expose IB diagnostic hardware counters. The counters count IB events and are applicable for IB and RoCE. The counters can be divided into two groups, per device and per port. Device counters are always exposed. Port counters are exposed only if the firmware supports per port counters. rq_num_dup and sq_num_to are only exposed if we have firmware support for them, if we do, we expose them per device and per port. rq_num_udsdprd and num_cqovf are device only counters. rq - denotes responder. sq - denotes requester. |-----------------------|---------------------------------------| | Name | Description | |-----------------------|---------------------------------------| |rq_num_lle | Number of local length errors | |-----------------------|---------------------------------------| |sq_num_lle | number of local length errors | |-----------------------|---------------------------------------| |rq_num_lqpoe | Number of local QP operation errors | |-----------------------|---------------------------------------| |sq_num_lqpoe | Number of local QP operation errors | |-----------------------|---------------------------------------| |rq_num_lpe | Number of local protection errors | |-----------------------|---------------------------------------| |sq_num_lpe | Number of local protection errors | |-----------------------|---------------------------------------| |rq_num_wrfe | Number of CQEs with error | |-----------------------|---------------------------------------| |sq_num_wrfe | Number of CQEs with error | |-----------------------|---------------------------------------| |sq_num_mwbe | Number of Memory Window bind errors | |-----------------------|---------------------------------------| |sq_num_bre | Number of bad response errors | |-----------------------|---------------------------------------| |sq_num_rire | Number of Remote Invalid request | | | errors | |-----------------------|---------------------------------------| |rq_num_rire | Number of Remote Invalid request | | | errors | |-----------------------|---------------------------------------| |sq_num_rae | Number of remote access errors | |-----------------------|---------------------------------------| |rq_num_rae | Number of remote access errors | |-----------------------|---------------------------------------| |sq_num_roe | Number of remote operation errors | |-----------------------|---------------------------------------| |sq_num_tree | Number of transport retries exceeded | | | errors | |-----------------------|---------------------------------------| |sq_num_rree | Number of RNR NAK retries exceeded | | | errors | |-----------------------|---------------------------------------| |rq_num_rnr | Number of RNR NAKs sent | |-----------------------|---------------------------------------| |sq_num_rnr | Number of RNR NAKs received | |-----------------------|---------------------------------------| |rq_num_oos | Number of Out of Sequence requests | | | received | |-----------------------|---------------------------------------| |sq_num_oos | Number of Out of Sequence NAKs | | | received | |-----------------------|---------------------------------------| |rq_num_udsdprd | Number of UD packets silently | | | discarded on the Receive Queue due to | | | lack of receive descriptor | |-----------------------|---------------------------------------| |rq_num_dup | Number of duplicate requests received | |-----------------------|---------------------------------------| |sq_num_to | Number of time out received | |-----------------------|---------------------------------------| |num_cqovf | Number of CQ overflows | |-----------------------|---------------------------------------| Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-04net/mlx4: Query performance and diagnostics countersMark Bloch1-0/+3
Add a function to query diagnostics counters from the firmware. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-04net/mlx4: Add diagnostic counters capability bitMark Bloch1-0/+1
Add a bit that indicates if the firmware supports per port diagnostic counters. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-04extable.h: add stddef.h so "NULL" definition is not implicitPaul Gortmaker1-0/+2
While not an issue now, eventually we will have independent users of the extable.h file and we will stop sourcing it via module.h header. In testing that pending work, with very sparse builds, characteristic of an "allnoconfig" on various architectures, we can sometimes hit an instance where the very basic standard definitions aren't present, resulting in: include/linux/extable.h:26:9: error: 'NULL' undeclared (first use in this function) To be clear, this isn't a regression, since currently extable.h is only used by module.h -- however, we will need this addition present before we start migrating exception table users off module.h and onto extable.h during the next release cycle. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-08-04modules: add ro_after_init supportJessica Yu2-2/+5
Add ro_after_init support for modules by adding a new page-aligned section in the module layout (after rodata) for ro_after_init data and enabling RO protection for that section after module init runs. Signed-off-by: Jessica Yu <jeyu@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-08-04exceptions: fork exception table content from module.h into extable.hPaul Gortmaker2-25/+32
For historical reasons (i.e. pre-git) the exception table stuff was buried in the middle of the module.h file. I noticed this while doing an audit for needless includes of module.h and found core kernel files (both arch specific and arch independent) were just including module.h for this. The converse is also true, in that conventional drivers, be they for filesystems or actual hardware peripherals or similar, do not normally care about the exception tables. Here we fork the exception table content out of module.h into a new file called extable.h -- and temporarily include it into the module.h itself. Then we will work our way across the arch independent and arch specific files needing just exception table content, and move them off module.h and onto extable.h Once that is done, we can remove the extable.h from module.h and in doing it like this, we avoid introducing build failures into the git history. The gain here is that module.h gets a bit smaller, across all modular drivers that we build for allmodconfig. Also the core files that only need exception table stuff don't have an include of module.h that brings in lots of extra stuff and just looks generally out of place. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-08-03Merge branch 'for-viro' of ↵Al Viro1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into for-linus
2016-08-03vfs: make dentry_needs_remove_privs() internalMiklos Szeredi1-1/+0
Only used by the vfs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-08-03vfs: remove file_needs_remove_privs()Miklos Szeredi1-4/+0
This function is now unused. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: 1) Fix several cases of missing of_node_put() calls in various networking drivers. From Peter Chen. 2) Don't try to remove unconfigured VLANs in qed driver, from Yuval Mintz. 3) Unbalanced locking in TIPC error handling, from Wei Yongjun. 4) Fix lockups in CPDMA driver, from Grygorii Strashko. 5) More MACSEC refcount et al fixes, from Sabrina Dubroca. 6) Fix MAC address setting in r8169 during runtime suspend, from Chun-Hao Lin. 7) Various printf format specifier fixes, from Heinrich Schuchardt. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) qed: Fail driver load in 100g MSI mode. ethernet: ti: davinci_emac: add missing of_node_put after calling of_parse_phandle ethernet: stmicro: stmmac: add missing of_node_put after calling of_parse_phandle ethernet: stmicro: stmmac: dwmac-socfpga: add missing of_node_put after calling of_parse_phandle ethernet: renesas: sh_eth: add missing of_node_put after calling of_parse_phandle ethernet: renesas: ravb_main: add missing of_node_put after calling of_parse_phandle ethernet: marvell: pxa168_eth: add missing of_node_put after calling of_parse_phandle ethernet: marvell: mvpp2: add missing of_node_put after calling of_parse_phandle ethernet: marvell: mvneta: add missing of_node_put after calling of_parse_phandle ethernet: hisilicon: hns: hns_dsaf_main: add missing of_node_put after calling of_parse_phandle ethernet: hisilicon: hns: hns_dsaf_mac: add missing of_node_put after calling of_parse_phandle ethernet: cavium: octeon: add missing of_node_put after calling of_parse_phandle ethernet: aurora: nb8800: add missing of_node_put after calling of_parse_phandle ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle ethernet: apm: xgene: add missing of_node_put after calling of_parse_phandle ethernet: altera: add missing of_node_put 8139too: fix system hang when there is a tx timeout event. qed: Fix error return code in qed_resc_alloc() net: qlcnic: avoid superfluous assignement dsa: b53: remove redundant if ...
2016-08-03IB/hfi1: Allow for non-double word multiple message sizes for user SDMAIra Weiny1-1/+1
The driver pads non-double word multiple message sizes but it doesn't account for this padding when the packet length is calculated. Also, the data length is miscalculated for message sizes less than 4 bytes due to the bit representation in LRH. And there's a check for non-double word multiple message sizes that prevents these messages from being sent. This patch fixes length miscalculations and enables the functionality to send non-double word multiple message sizes. Reviewed-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/rdmavt: Eliminate redundant opcode test in mr ref clearIra Weiny1-6/+4
The use of the specific opcode test is redundant since all ack entry users correctly manipulate the mr pointer to selectively trigger the reference clearing. The overly specific test hinders the use of implementation specific operations. The change needs to get rid of the union to insure that an atomic value is not seen as an MR pointer. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds27-431/+735
Merge yet more updates from Andrew Morton: - the rest of ocfs2 - various hotfixes, mainly MM - quite a bit of misc stuff - drivers, fork, exec, signals, etc. - printk updates - firmware - checkpatch - nilfs2 - more kexec stuff than usual - rapidio updates - w1 things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) ipc: delete "nr_ipc_ns" kcov: allow more fine-grained coverage instrumentation init/Kconfig: add clarification for out-of-tree modules config: add android config fragments init/Kconfig: ban CONFIG_LOCALVERSION_AUTO with allmodconfig relay: add global mode support for buffer-only channels init: allow blacklisting of module_init functions w1:omap_hdq: fix regression w1: add helper macro module_w1_family w1: remove need for ida and use PLATFORM_DEVID_AUTO rapidio/switches: add driver for IDT gen3 switches powerpc/fsl_rio: apply changes for RIO spec rev 3 rapidio: modify for rev.3 specification changes rapidio: change inbound window size type to u64 rapidio/idt_gen2: fix locking warning rapidio: fix error handling in mbox request/release functions rapidio/tsi721_dma: advance queue processing from transfer submit call rapidio/tsi721: add messaging mbox selector parameter rapidio/tsi721: add PCIe MRRS override parameter rapidio/tsi721_dma: add channel mask and queue size parameters ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 02:08:25 +0300