| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit c58e9456e30c7098cbcd9f04571992be8a2e4e63 upstream.
The active_req field serves double duty as both the "is a TX in
flight" flag (NULL means idle) and the storage for the in-flight
message pointer. When a client sends NULL via mbox_send_message(),
active_req is set to NULL, which the framework misinterprets as
"no active request". This breaks the TX state machine by:
- tx_tick() short-circuits on (!mssg), skipping the tx_done
callback and the tx_complete completion
- txdone_hrtimer() skips the channel entirely since active_req
is NULL, so poll-based TX-done detection never fires.
Fix this by introducing a MBOX_NO_MSG sentinel value that means
"no active request," freeing NULL to be valid message data. The
sentinel is defined in the subsystem-internal mailbox.h so that
controller drivers within drivers/mailbox/ can reference it, but
it is not exposed to clients outside the subsystem.
Fifteen in-tree callers send NULL (doorbell-style IPCs on Qualcomm,
Tegra, TI, Xilinx, i.MX, SCMI, and PCC platforms). All were
audited for regression:
- Most already work around the bug via knows_txdone=true with a
manual mbox_client_txdone() call, making the framework's
tracking irrelevant. These are unaffected.
- Poll-based callers (Xilinx zynqmp/r5) are strictly better off:
the poll timer now correctly detects NULL-active channels
instead of silently skipping them.
- irq-qcom-mpm.c was a pre-existing bug -- the only Qualcomm
caller that omitted the knows_txdone + mbox_client_txdone()
pattern. Fixed in a companion commit ("irqchip/qcom-mpm: Fix
missing mailbox TX done acknowledgment").
- No caller sets both a tx_done callback and sends NULL, nor
combines tx_block=true with NULL sends, so the newly reachable
callback/completion paths are never exercised.
Also update tegra-hsp's flush callback, which directly inspects
active_req to wait for the channel to drain: the old "!= NULL"
check becomes "!= MBOX_NO_MSG", otherwise flush spins until
timeout since the sentinel is non-NULL.
The only tradeoff is that 'MBOX_NO_MSG' can not be used as a message
by clients.
Reported-by: Joonwon Kang <joonwonkang@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6d71c62b13c33ea858ab298fe20beaec5736edc7 ]
To prepare serdev driver to migrate away from struct device_driver::shutdown
(and then eventually remove that callback) create a serdev driver shutdown
callback and migration code to keep the existing behaviour. Note this
introduces a warning for each driver at register time that isn't converted
yet to that callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/ab518883e3ed0976a19cb5b5b5faf42bd3a655b7.1765526117.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 375ba7484132 ("Bluetooth: hci_qca: Convert timeout from jiffies to ms")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9577c74c96f88d807d1ba005adbf5952e7127e55 ]
Treat PCI id->driver_data (intel_vsec_platform_info) as read-only by making
vsec_priv->info a const pointer and updating all function signatures to
accept const intel_vsec_platform_info *.
This improves const-correctness and clarifies that the platform info data
from the driver_data table is not meant to be modified at runtime.
No functional changes intended.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-3-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 348ccc754d89 ("platform/x86/intel/vsec: Fix enable_cnt imbalance on PCIe error recovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c3cce2e67bb22a223f5b8ef05db0fcde70994068 upstream.
uart_handle_break() and uart_prepare_sysrq_char() (in
include/linux/serial_core.h) capture a SysRq character into
port->sysrq_ch while the port lock is held and rely on the unlock
helper -- uart_unlock_and_check_sysrq_irqrestore() -- to dispatch the
captured character to handle_sysrq() on scope exit.
The existing guard(uart_port_lock_irqsave) cannot be used by IRQ
handlers that process RX, because its destructor calls plain
uart_port_unlock_irqrestore() and silently drops port->sysrq_ch.
Add a dedicated guard(uart_port_lock_check_sysrq_irqsave) variant
whose destructor is the sysrq-aware unlock helper. The lock side is
identical to uart_port_lock_irqsave -- only the unlock-time behaviour
differs. Callers that may capture SysRq characters must use
guard(uart_port_lock_check_sysrq_irqsave); the existing
guard(uart_port_lock_irqsave) keeps its current plain-unlock semantics
for the many callers that do not process RX.
The new macro is placed after the CONFIG_MAGIC_SYSRQ_SERIAL block so
both definitions of uart_unlock_and_check_sysrq_irqrestore() (sysrq
enabled and disabled) are visible at expansion time. When
CONFIG_MAGIC_SYSRQ_SERIAL=n the destructor degenerates to plain
uart_port_unlock_irqrestore(), so there is no overhead.
No functional change on its own; users are converted in the following
patches.
Cc: stable@vger.kernel.org
Signed-off-by: Jacques Nilo <jnilo@free.fr>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/3849af4bc55d5d2a424fa850844e94d641b2f8a6.1778675349.git.jnilo@free.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7e2a4f7ca0952820731ef7bdadfc9a9e9d3571b4 upstream.
xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate()
in net/key/af_key.c both hardcode &init_net for the multicast that
announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE.
XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the
rest of the xfrm/af_key netlink path was made netns-aware in 2008.
The other 14 multicast paths in xfrm_user.c route their event using
xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path
was missed.
Two consequences of the init_net hardcoding:
1. The notification (selector, old/new endpoint addresses, and the
km_address) is delivered to listeners on init_net's
XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on
the issuing netns. An IKE daemon running in init_net therefore
receives migration notifications originating from any other
netns on the host.
2. An IKE daemon running inside a non-init netns and subscribed
to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the
notification of its own migration. IKEv2 MOBIKE / address-update
handling inside a netns is silently broken.
Thread struct net through km_migrate() and the xfrm_mgr.migrate
function pointer, drop the &init_net override in xfrm_send_migrate()
and pfkey_send_migrate(), and pass the caller's net (already in
scope in xfrm_migrate() via sock_net(skb->sk)) all the way down.
struct xfrm_mgr is in-tree only and not exported as a stable API,
so the function-pointer signature change is internal.
pfkey_broadcast() is already netns-aware via net_generic(net,
pfkey_net_id) since the pernet conversion. The five other
pfkey_broadcast() callers in af_key.c already pass xs_net(x),
sock_net(sk) or a per-netns net, so this only removes the
&init_net outlier.
Fixes: 5c79de6e79cd ("[XFRM]: User interface for handling XFRM_MSG_MIGRATE")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c9ad387aa2d6785299722e54224d34764edaeb3 upstream.
gcc-16 has gained some more advanced inter-procedual optimization
techniques that enable it to inline the dummy_tlb_add_page() and
dummy_tlb_flush() function pointers into a specialized version of
__arm_v7s_unmap:
WARNING: modpost: vmlinux: section mismatch in reference: __arm_v7s_unmap+0x2cc (section: .text) -> dummy_tlb_add_page (section: .init.text)
ERROR: modpost: Section mismatches detected.
>From what I can tell, the transformation is correct, as this is only
called when __arm_v7s_unmap() is called from arm_v7s_do_selftests(),
which is also __init. Since __arm_v7s_unmap() however is not __init,
gcc cannot inline the inner function calls directly.
In debug_objects_selftest(), the same thing happens. Both the
caller and the leaf function are __init, but the IPA pulls
it into a non-init one:
WARNING: modpost: vmlinux: section mismatch in reference: lookup_object_or_alloc+0x7c (section: .text.lookup_object_or_alloc) -> is_static_object (section: .init.text)
Marking the affected functions as not "__init" would reliably avoid this
issue but is not a good solution because it removes an otherwise correct
annotation. I tried marking the functions as 'noinline', but that ended
up not covering all the affected configurations.
With some more experimenting, I found that marking these functions as
__attribute__((noipa)) is both logical and reliable.
In order to keep the syntax readable, add a custom macro for this in
include/linux/compiler_attributes.h next to other related macros and
use it to annotate both files.
Link: https://lore.kernel.org/all/abRB6g-48ZX6Yl2r@willie-the-truck/
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 175db11786bde9061db526bf1ac5107d915f5163 upstream.
Clang recently added support for -Wattribute-alias [1], which results in
the same warnings that necessitated commit bee20031772a ("disable
-Wattribute-alias warning for SYSCALL_DEFINEx()") for GCC.
kernel/time/itimer.c:325:1: error: alias and aliasee have different types 'long (unsigned int)' and 'long (typeof (__builtin_choose_expr((__builtin_types_compatible_p(typeof ((unsigned int)0), typeof (0LL)) || __builtin_types_compatible_p(typeof ((unsigned int)0), typeof (0ULL))), 0LL, 0L)))' (aka 'long (long)') [-Werror,-Wattribute-alias]
325 | SYSCALL_DEFINE1(alarm, unsigned int, seconds)
| ^
include/linux/syscalls.h:225:36: note: expanded from macro 'SYSCALL_DEFINE1'
225 | #define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
| ^
include/linux/syscalls.h:236:2: note: expanded from macro 'SYSCALL_DEFINEx'
236 | __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
| ^
include/linux/syscalls.h:251:18: note: expanded from macro '__SYSCALL_DEFINEx'
251 | __attribute__((alias(__stringify(__se_sys##name)))); \
| ^
kernel/time/itimer.c:325:1: note: aliasee is declared here
include/linux/syscalls.h:225:36: note: expanded from macro 'SYSCALL_DEFINE1'
225 | #define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
| ^
include/linux/syscalls.h:236:2: note: expanded from macro 'SYSCALL_DEFINEx'
236 | __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
| ^
include/linux/syscalls.h:255:18: note: expanded from macro '__SYSCALL_DEFINEx'
255 | asmlinkage long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \
| ^
<scratch space>:16:1: note: expanded from here
16 | __se_sys_alarm
| ^
Disable the warnings in the same way for clang-23 and newer. Disable the
warning about unknown warning options to avoid breaking the build for
versions of clang-23 that do not have -Wattribute-alias, such as ones
deployed by vendors like Android or CI systems or when bisecting LLVM
between llvmorg-23-init and release/23.x.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2163
Link: https://github.com/llvm/llvm-project/commit/40da6920a0d71d49dfa2392b09153600b0759f5e [1]
Link: https://patch.msgid.link/20260515-syscall-disable-attribute-alias-for-clang-v1-1-9a9d95d41df6@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef15ccbb3e8640a723c42ad90eaf81d66ae02017 upstream.
The parport subsystem registers port devices before they are fully
initialised, resulting in a race condition where client drivers such
as lp can attach to ports that are not completely initialised or even
being torn down.
When the port and client drivers are built as modules and loaded
around the same time during boot, this occasionally results in a
crash. I was able to make this happen reliably in a VM with a
PC-style parallel port by patching parport_pc to fail probing:
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base,
> if (!p)
> goto out3;
>
> - base_res = request_region(base, 3, p->name);
> + base_res = NULL;
> if (!base_res)
> goto out4;
>
and then running:
while true; do
modprobe lp & modprobe parport_pc
wait
rmmod lp parport_pc
done
for a few seconds.
In the long term I think port registration should be changed to put
the call to device_add() inside parport_announce_port(), but since the
latter currently cannot fail this will require changing all port
drivers.
For now, add a flag to indicate whether a port has been "announced"
and only try to attach client drivers to ports when the flag is set.
Fixes: 6fa45a226897 ("parport: add device-model to parport subsystem")
Closes: https://bugs.debian.org/1130365
Closes: https://lore.kernel.org/all/6ba903ad-9897-42bb-8c2d-337385cc3746@molgen.mpg.de/
Cc: stable <stable@kernel.org>
Signed-off-by: Ben Hutchings <benh@debian.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://patch.msgid.link/afo6uBv68GDevbMD@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dccc0c3ddf8f16071736f98a7d6dd46a2d43e037 ]
Some rc device drivers have a race condition between rc_unregister_device()
and irq or urb callbacks. This is because rc_unregister_device() does two
things, it marks the device as unregistered so no new commands can be
issued and then it calls rc_free_device(). This means the driver has no
chance to cancel any pending urb callbacks or interrupts after the device
has been marked as unregistered. Those callbacks may access struct rc_dev
or its members (e.g. struct ir_raw_event_ctrl), which have been freed by
rc_free_device().
This change removes the implicit call to rc_free_device() from
rc_unregister_device(). This means that device drivers can call
rc_unregister_device() in their remove or disconnect function, then cancel
all the urbs and interrupts before explicitly calling rc_free_device().
Note this is an alternative fix for an issue found by Haotian Zhang, see
the Closes: tags.
Reported-by: Haotian Zhang <vulab@iscas.ac.cn>
Closes: https://lore.kernel.org/linux-media/20251114101432.2566-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101418.2548-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101346.2530-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114090605.2413-1-vulab@iscas.ac.cn/
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Stable-dep-of: 646ebdd31058 ("media: rc: ttusbir: fix inverted error logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cfa477df2cc62ba53cb936669886361152b594a7 ]
This team mode op is only used by the load balance mode, and it only
uses it in the tx path.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-3-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 25fe708bbc59 ("net: team: fix NULL pointer dereference in team_xmit during mode change")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 014f249121d73909528df320818fba7693d0ec92 ]
This team_mode_op wasn't used by any of the team modes, so remove it.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-2-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 25fe708bbc59 ("net: team: fix NULL pointer dereference in team_xmit during mode change")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 18014147d3ee7831dce53fe65d7fc8d428b02552 ]
For lshift and rshift, the shift operations are performed in a loop over
32-bit words. The loop calculates the shifted value and write it to dst,
and then immediately reads from src to calculate the carry for the next
iteration. Because src and dst could point to the same memory location,
the carry is incorrectly calculated using the newly modified dst value
instead of the original src value.
Adding a temporary local variable to cache the original value before
writing to dst and using it for the carry calculation solves the
problem. In addition, partial overlap is rejected from control plane for
all kind of operations including byteorder. This was tested with the
following bytecode:
table test_table ip flags 0 use 1 handle 1
ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1
ip test_table test_chain 2
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x66443322 0x00887766 ]
[ counter pkts 0 bytes 0 ]
ip test_table test_chain 4 3
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x55443322 0x00887766 ]
[ counter pkts 21794 bytes 1917798 ]
Fixes: 567d746b55bc ("netfilter: bitwise: add support for shifts.")
Acked-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fb6988b83b4cafe8db63999c1ddff1b7c66d2ff5 ]
When the kernel is booted with a kunit filter (e.g.,
kunit.filter="speed!=slow"), the kunit executor dynamically allocates
copies of the filtered test suites using kmalloc/kmemdup.
During the initial boot execution, kunit_debugfs_create_suite() creates
debugfs files (such as /sys/kernel/debug/kunit/<suite>/run) and
permanently stores a pointer to the dynamically allocated suite in the
inode's i_private field.
Previously, the executor freed this dynamically allocated suite_set
immediately after executing the boot-time tests. Because the debugfs
nodes were not destroyed, any subsequent interaction with the debugfs
`run` file from userspace triggered a use-after-free (UAF). On systems
with architectural capabilities, like CHERI RISC-V, this resulted in
an immediate fatal hardware exception due to the invalidation of the
capability tags on the reclaimed memory. On other architectures, it
resulted in silent memory corruption.
Fix this UAF by properly coupling the lifetime of the filtered suite
memory allocation to the lifetime of the kunit subsystem and its
associated VFS nodes. Ownership of the boot-time suite_set is now
transferred to a global tracker ('kunit_boot_suites'), and the memory
is cleanly released in kunit_exit() during module teardown.
Link: https://lore.kernel.org/r/20260507084854.233984-1-florian.schmaus@codasip.com
Fixes: e2219db280e3 ("kunit: add debugfs /sys/kernel/debug/kunit/<suite>/results display")
Signed-off-by: Florian Schmaus <florian.schmaus@codasip.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd2147375a8fe7c5bc3f1f1b1d3a9567c26faefa ]
The hid_warn_ratelimited macro is defined twice in include/linux/hid.h:
- first one added by commit 4051ead99888 ("HID: rate-limit hid_warn to
prevent log flooding")
- second one added by commit 1d64624243af ("HID: core: Add
printk_ratelimited variants to hid_warn() etc")).
The second definition is correctly grouped with other ratelimited macros.
Remove the duplicate definition.
Fixes: 1d64624243af ("HID: core: Add printk_ratelimited variants to hid_warn() etc")
Signed-off-by: Liu Kai <lukace97@outlook.com>
[bentiss: edited commit message]
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1bbf0ced1d9db73ac7893c2187f3459288603e0d ]
Blamed commit moved the TIME_WAIT-derived ISN from the skb control
block to a per-CPU variable, assuming the value would always be consumed
by tcp_conn_request() for the same packet that wrote it. That assumption
is violated by multiple drop paths between the producer
(__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer
(tcp_conn_request()):
- min_ttl / min_hopcount check
- xfrm policy check
- tcp_inbound_hash() MD5/AO mismatch
- tcp_filter() eBPF/SO_ATTACH_FILTER drop
- th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN
- psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv()
- tcp_checksum_complete() in tcp_v{4,6}_do_rcv()
- tcp_v{4,6}_cookie_check() returning NULL
When a packet is dropped on any of these paths, tcp_tw_isn is left set.
The next SYN processed on the same CPU then consumes the non zero value in
tcp_conn_request(), receiving a potentially predictable ISN.
This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu
variable.
Note that tcp_v{4,6}_fill_cb() do not set it.
Very litle impact on overall code size/complexity:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function old new delta
tcp_v6_rcv 3038 3042 +4
tcp_v4_rcv 3035 3039 +4
tcp_conn_request 2938 2923 -15
Total: Before=24436060, After=24436053, chg -0.00%
Fixes: 41eecbd712b7 ("tcp: replace TCP_SKB_CB(skb)->tcp_tw_isn with a per-cpu field")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260519084611.2485277-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2b50aceafe6606ea52ed42aadd1b4d44a188aade ]
Change the krb5 crypto library to provide facilities to precheck the length
of the message about to be decrypted or verified.
Fix AF_RXRPC to make use of this to validate DATA packets secured with
RxGK.
Fixes: 9d1d2b59341f ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)")
Closes: https://sashiko.dev/#/patchset/20260511160753.607296-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Simon Horman <horms@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260515230516.2718212-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8d7519352ba8c6df83259295d4a3bad093cae90 ]
Recent commit changed the semantics from NOT_VALID to VALID.
I didn't realize that the flags are not stored atomically
with the entry in XArray. There's still a race of reader
observing a VALID mark for a slot, getting interrupted,
writer replacing the entry with a different one, reader
continuing, fetching the entry which is now a different
pointer than the pointer for which VALID was meant.
The biggest consequence of this is that we may see a UAF
since net_shaper_rollback() assumed that entries without
VALID can be freed without observing RCU.
Looks like the XArray marks are buying us nothing at this
point. Let's convert the code to an explicit valid field.
The smp_load_acquire() / smp_store_release() barriers are
marginally cleaner.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 93954b40f6a4 ("net-shapers: implement NL set and delete operations")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260515221325.1685455-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0cb5a74faa3bdcfa3b18735d554e12c0f615e35d ]
In an internal review from Airoha, it was notice that the RX DMA descriptor
bits and mask are wrong. These values probably refer to an old NPU firmware
never published. The previous value works correctly but it was reported
that in some specific condition in mixed scenario with both Ethernet and
WiFi offload it's possible that RX DMA descriptor signal wrong value with
the problem to the RX ring or packets getting dropped.
To handle these specific scenario, apply the new suggested bits mask from
Airoha.
Correct functionality of both AN7581 NPU and MT7996 variant were verified
and confirmed working.
Fixes: a7fc8c641cab ("net: airoha: Fix npu rx DMA definitions")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260518134530.3683-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8817005efbdfdf5d4e4814cb5dc52b53d12917d7 ]
css_rstat_updated() is exposed as a BPF kfunc and accepts a
caller-provided cpu argument. The function uses cpu for per-cpu rstat
lookups without checking whether it refers to a valid possible CPU.
A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an
invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu ==
0x7fffffff triggers:
UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9
index 2147483647 is out of range for type 'long unsigned int [64]'
Call Trace:
css_rstat_updated
bpf_iter_run_prog
cgroup_iter_seq_show
bpf_seq_read
Add cpu validation to the BPF-facing css_rstat_updated() kfunc and
move the common implementation to __css_rstat_updated() for in-kernel
callers.
Fixes: a319185be9f5 ("cgroup: bpf: enable bpf programs to integrate with rstat")
Signed-off-by: Qing Ming <a0yami@mailbox.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ccde2ac757c713535b224233a296de40efe5212d ]
Under some circumstances, netfs_perform_write() doesn't correctly
manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing
to a group and pointing to a netfs_folio struct, leading to potential
multiple attachments of private data with associated folio ref leaks and
also leaks of netfs_folio structs or netfs_group refs.
Fix this by consolidating the place at which a folio is marked uptodate in
one place and having that look at what's attached to folio->private and
decide how to clean it up and then set the new group. Also, the content
shouldn't be flushed if group is NULL, even if a group is specified in the
netfs_group parameter, as that would be the case for a new folio. A
filesystem should always specify netfs_group or never specify netfs_group.
The Sashiko auto-review tool noted that it was theoretically possible that
the fpos >= ctx->zero_point section might leak if it modified a streaming
write folio. This is unlikely, but with a network filesystem, third party
changes can happen. It also pointed out that __netfs_set_group() would
leak if called multiple times on the same folio from the "whole folio
modify section".
Fixes: 8f52de0077ba ("netfs: Reduce number of conditional branches in netfs_perform_write()")
Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-22-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dbe556972100fabb8e5a1b3d2163831ff07b1e8e ]
netfs_unlock_abandoned_read_pages(rreq) accesses the index of the folios it
is wanting to unlock and compares that to rreq->no_unlock_folio so that it
doesn't unlock a folio being read for netfs_perform_write() or
netfs_write_begin().
However, given that netfs_unlock_abandoned_read_pages() is called _after_
NETFS_RREQ_IN_PROGRESS is cleared, the one folio that it's not allowed to
dereference is the one specified by ->no_unlock_folio as ownership
immediately reverts to the caller.
Fix this by storing the folio pointer instead and using that rather than
the index. Also fix netfs_unlock_read_folio() where the same applies.
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-20-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b4dcf1b9455a6e52ac7478b4057dbe10359576d ]
In order to avoid reading whilst writing, netfslib will allow "streaming
writes" in which dirty data is stored directly into folios without reading
them first. Such folios are marked dirty but may not be marked uptodate.
If a folio is entirely written by a streaming write, uptodate will be set,
otherwise it will have a netfs_folio struct attached to ->private recording
the dirty region.
In the event that a partially written streaming write page is to be
overwritten entirely by a single write(), netfs_perform_write() will try to
copy over it, but doesn't discard the netfs_folio if it succeeds; further,
it doesn't correctly handle a partial copy that overwrites some of the
dirty data.
Fix this by the following:
(1) If the folio is successfully overwritten, free the netfs_folio struct
before marking the page uptodate.
(2) If the copy to the folio partially fails, but short of the dirty data,
just ignore the copy.
(3) If the copy partially fails and overwrites some of the dirty data,
accept the copy, update the netfs_folio struct to record the new data.
If the folio is now filled, free the netfs_folio and set uptodate,
otherwise return a partial write.
Found with:
fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \
/xfstest.test/junk --replay-ops=junk.fsxops
using the following as junk.fsxops:
truncate 0x0 0 0x927c0
write 0x63fb8 0x53c8 0
copy_range 0xb704 0x19b9 0x24429 0x79380
write 0x2402b 0x144a2 0x90660 *
write 0x204d5 0x140a0 0x927c0 *
copy_range 0x1f72c 0x137d0 0x7a906 0x927c0 *
read 0x00000 0x20000 0x9157c
read 0x20000 0x20000 0x9157c
read 0x40000 0x20000 0x9157c
read 0x60000 0x20000 0x9157c
read 0x7e1a0 0xcfb9 0x9157c
on cifs with the default cache option.
It shows folio 0x24 misbehaving if the FMODE_READ check is commented out in
netfs_perform_write():
if (//(file->f_mode & FMODE_READ) ||
netfs_is_cache_enabled(ctx)) {
and no fscache. This was initially found with the generic/522 xfstest.
Fixes: 8f52de0077ba ("netfs: Reduce number of conditional branches in netfs_perform_write()")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-14-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 156ac2ec2ee77c44c4eb7439d6d165247ba12247 ]
If a streaming write is made, this will leave the relevant modified folio
in a not-uptodate, but dirty state with a netfs_folio struct hung off of
folio->private indicating the dirty range. Subsequently truncating the
file such that the dirty data in the folio is removed, but the first part
of the folio theoretically remains will cause the netfs_folio struct to be
discarded... but will leave the dirty flag set.
If the folio is then read via mmap(), netfs_read_folio() will see that the
page is dirty and jump to netfs_read_gaps() to fill in the missing bits.
netfs_read_gaps(), however, expects there to be a netfs_folio struct
present and can oops because truncate removed it.
Fix this by calling folio_cancel_dirty() in netfs_invalidate_folio() in the
event that all the dirty data in the folio is erased (as nfs does).
Also add some tracepoints to log modifications to a dirty page.
This can be reproduced with something like:
dd if=/dev/zero of=/xfstest.test/foo bs=1M count=1
umount /xfstest.test
mount /xfstest.test
xfs_io -c "w 0xbbbf 0xf96c" \
-c "truncate 0xbbbf" \
-c "mmap -r 0xb000 0x11000" \
-c "mr 0xb000 0x11000" \
/xfstest.test/foo
with fscaching disabled (otherwise streaming writes are suppressed) and a
change to netfs_perform_write() to disallow streaming writes if the fd is
open O_RDWR:
if (//(file->f_mode & FMODE_READ) || <--- comment this out
netfs_is_cache_enabled(ctx)) {
It should be reproducible even without this change, but if prevents the
above trivial xfs_io command from reproducing it.
Note that the initial dd is important: the file must start out sufficiently
large that the zero-point logic doesn't just clear the gaps because it
knows there's nothing in the file to read yet. Unmounting and mounting is
needed to clear the pagecache (there are other ways to do that that may
also work).
This was initially reproduced with the generic/522 xfstest on some patches
that remove the FMODE_READ restriction.
Fixes: 9ebff83e6481 ("netfs: Prep to use folio->private for write grouping and streaming write")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-12-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 657b594b2084b39a4bc6d8493aa2140cb00cea49 ]
Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
changed fprobe to register struct fprobe to an rcu-hlist, but it forgot
to wait for RCU GP. Thus there can be use-after-free if the fprobe is
released right after unregistering. This can be happened on fprobe
event and sample module code.
To fix this issue, add synchronize_rcu() in unregister_fprobe().
Note that BPF is OK because fprobe is used as a part of
bpf_kprobe_multi_link. This unregisters its fprobe in
bpf_kprobe_multi_link_release() and it is deallocated via
bpf_kprobe_multi_link_dealloc(), which is invoked from
bpf_link_defer_dealloc_rcu_gp() RCU callback.
For BPF, this also introduced unregister_fprobe_async() which does
NOT wait for RCU grace priod.
Link: https://lore.kernel.org/all/177813998919.256460.2809243930741138224.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 307abfac04a254c09c5705d816b33354acee97a0 ]
When kprobe_add_area_blacklist() iterates through a section like
.kprobes.text, the start address may not correspond to a named symbol.
On ARM64 with CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS=y (introduced by
commit baaf553d3bc3 ("arm64: Implement
HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS")), the compiler flag
-fpatchable-function-entry=4,2 inserts 2 NOPs before each function entry
point for ftrace call_ops. These pre-function NOPs sit at the section base
address, before the first named function symbol. The compiler emits a $x
mapping symbol at offset 0x00 to mark the start of code, but
find_kallsyms_symbol() ignores mapping symbols.
Without CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS (e.g. defconfig), no
pre-function NOPs are inserted, the first function starts at offset
0x00, and the bug does not trigger.
This only affects modules that have a .kprobes.text section (i.e. those
using the __kprobes annotation). Modules using NOKPROBE_SYMBOL() instead
(like kretprobe_example.ko) blacklist exact function addresses via the
_kprobe_blacklist section and are not affected.
For kprobe_example.ko on ARM64 with -fpatchable-function-entry=4,2,
the .kprobes.text section layout is:
offset 0x00: $x + 2 NOPs (mapping symbol + ftrace preamble)
offset 0x08: handler_post (64 bytes)
offset 0x50: handler_pre (68 bytes)
kprobe_add_area_blacklist() starts iterating from the section base
address (offset 0x00), which only has the $x mapping symbol.
kprobe_add_ksym_blacklist() then calls kallsyms_lookup_size_offset()
for this address, which goes through:
kallsyms_lookup_size_offset()
-> module_address_lookup()
-> find_kallsyms_symbol()
find_kallsyms_symbol() scans all module symbols to find the closest
preceding symbol.
Since no named text symbol exists at offset 0x00,
find_kallsyms_symbol() picks __UNIQUE_ID_vermagic (a .modinfo symbol
whose address is in the temporary image) as the "best" match. The
computed "size" = next_text_symbol - modinfo_symbol spans across
these two unrelated memory regions, creating a blacklist entry with
a bogus range of tens of terabytes.
Whether this causes a visible failure depends on address randomization,
here is what happens on Raspberry Pi 4/5:
- On RPi5, the bogus size was ~35 TB. start + size stayed within
64-bit range, so the blacklist entry covered the entire kernel
text. register_kprobe() in the module's own init function failed
with -EINVAL.
- On RPi4, the bogus size was ~75 TB. start + size overflowed
64 bits and wrapped to a small address near zero. The range
check (addr >= start && addr < end) then failed because end
wrapped around, so the bogus entry was accidentally harmless
and kprobes worked by luck.
The same bug exists on both machines, but randomization determines whether
the integer overflow masks it or not.
Fix this by adding notrace to the __kprobes macro. Functions in
.kprobes.text are kprobe infrastructure handlers that should never be
traced by ftrace. With notrace, the compiler stops inserting them and the
non-symbol gap at the section start disappears entirely.
Link: https://lore.kernel.org/all/20260506012706.2785785-1-jianpeng.chang.cn@windriver.com/
Fixes: baaf553d3bc3 ("arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b4597d5fd7d2f8cebfffd40dffb5e003cc78964c ]
Previous change added xtables_unregister_table_pre_exit to detach the
table from the packetpath and to unlink it from the active table list.
In case of rmmod, userspace that is doing set/getsockopt for this table
will not be able to re-instantiate the table:
1. The larval table has been removed already
2. existing instantiated table is no longer on the xt pernet table list.
This adds the second stage helper:
unlink the table from the dying list, free the hook ops (if any) and do
the audit notification. It replaces xt_unregister_table().
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default")
Reported-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 527d6931473b75d90e38942aae6537d1a527f1fd ]
Remove the copypasted variants of _pre_exit and add one single
function in the xtables core. ebtables is not compatible with
x_tables and therefore unchanged.
This is a preparation patch to reduce noise in the followup
bug fixes.
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: b4597d5fd7d2 ("netfilter: x_tables: add and use xtables_unregister_table_exit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c73370c677646e86fc4b1780fb07027bdf847375 ]
The trace event btrfs_sync_file() is called in an atomic context (all trace
events are) and its call to dput(), which is needed due to the call to
dget_parent(), can sleep, triggering a kernel splat.
This can be reproduced by enabling the trace event and running btrfs/056
from fstests for example. The splat shown in dmesg is the following:
[53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970
[53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io
[53.988] preempt_count: 2, expected: 0
[53.967] RCU nest depth: 0, expected: 0
[53.943] Preemption disabled at:
[53.944] [<0000000000000000>] 0x0
[54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full)
[54.070] Tainted: [W]=WARN
[54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[54.072] Call Trace:
[54.074] <TASK>
[54.076] dump_stack_lvl+0x56/0x80
[54.079] __might_resched.cold+0xd6/0x10f
[54.072] dput.part.0+0x24/0x110
[54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs]
[54.089] btrfs_sync_file+0x1ed/0x530 [btrfs]
[54.087] ? __handle_mm_fault+0x8ae/0xed0
[54.089] btrfs_do_write_iter+0x172/0x210 [btrfs]
[54.091] vfs_write+0x21f/0x450
[54.094] __x64_sys_pwrite64+0x8d/0xc0
[54.096] ? do_user_addr_fault+0x20c/0x670
[54.099] do_syscall_64+0x60/0xf20
[54.092] ? clear_bhb_loop+0x60/0xb0
[54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e
So stop using dget_parent() and dput() and access the parent dentry
directly as dentry->d_parent. This is also what ext4 is doing in
its equivalent trace event ext4_sync_file_enter().
Fixes: a85b46db143f ("btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 215c90ee656114f5e8c32408228d97082f8e0eef upstream.
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitalized memory which likely will
be neither NULL nor IS_ERR() and so may end up being dereferenced (for
example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization.
Cc: stable <stable@kernel.org>
Fixes: 01bb86b380a3 ("driver core: Add fwnode_init()")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260506115701.23035-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a494d3c8d5392bcdff83c2a593df0c160ff9f322 upstream.
On real hardware, panic and machine reboot may not flush hardware cache
to memory. This means the persistent ring buffer, which relies on a
coherent state of memory, may not have its events written to the buffer
and they may be lost. Moreover, there may be inconsistency with the
counters which are used for validation of the integrity of the
persistent ring buffer which may cause all data to be discarded.
To avoid this issue, stop recording of the ring buffer on panic and
flush the cache of the ring buffer's memory.
Fixes: e645535a954a ("tracing: Add option to use memmapped memory for trace boot instance")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/177751969602.2136606.12031934362587643488.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e196115ec330a18de415bdb9f5071aa9f08e53ce upstream.
br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge
master before queueing bridge LOCAL_IN packets. NFQUEUE only holds
references on state.in/out and bridge physdevs, so a queued bridge
packet can retain a freed bridge master in skb->dev until reinjection.
When the verdict is reinjected later, br_netif_receive_skb() re-enters
the receive path with skb->dev still pointing at the freed bridge master,
triggering a use-after-free.
Store skb->dev in the queue entry, hold a reference on it for the queue
lifetime, and use the saved device when dropping queued packets during
NETDEV_DOWN handling.
Fixes: ac2863445686 ("netfilter: bridge: add nf_afinfo to enable queuing to userspace")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e83f5e24da741fa9405aeeff00b08c5ee7c37b88 upstream.
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket.
Fixes: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
init_on_free
commit 6a288a4ddb4a994490505ab5f41c445f8e6b6467 upstream.
__GFP_ZEROTAGS semantics are currently a bit weird, but effectively this
flag is only ever set alongside __GFP_ZERO and __GFP_SKIP_KASAN.
If we run with init_on_free, we will zero out pages during
__free_pages_prepare(), to skip zeroing on the allocation path.
However, when allocating with __GFP_ZEROTAG set, post_alloc_hook() will
consequently not only skip clearing page content, but also skip clearing
tag memory.
Not clearing tags through __GFP_ZEROTAGS is irrelevant for most pages that
will get mapped to user space through set_pte_at() later: set_pte_at() and
friends will detect that the tags have not been initialized yet
(PG_mte_tagged not set), and initialize them.
However, for the huge zero folio, which will be mapped through a PMD
marked as special, this initialization will not be performed, ending up
exposing whatever tags were still set for the pages.
The docs (Documentation/arch/arm64/memory-tagging-extension.rst) state
that allocation tags are set to 0 when a page is first mapped to user
space. That no longer holds with the huge zero folio when init_on_free is
enabled.
Fix it by decoupling __GFP_ZEROTAGS from __GFP_ZERO, passing to
tag_clear_highpages() whether we want to also clear page content.
Invert the meaning of the tag_clear_highpages() return value to have
clearer semantics.
Reproduced with the huge zero folio by modifying the check_buffer_fill
arm64/mte selftest to use a 2 MiB area, after making sure that pages have
a non-0 tag set when freeing (note that, during boot, we will not actually
initialize tags, but only set KASAN_TAG_KERNEL in the page flags).
$ ./check_buffer_fill
1..20
...
not ok 17 Check initial tags with private mapping, sync error mode and mmap memory
not ok 18 Check initial tags with private mapping, sync error mode and mmap/mprotect memory
...
This code needs more cleanups; we'll tackle that next, like
decoupling __GFP_ZEROTAGS from __GFP_SKIP_KASAN.
[akpm@linux-foundation.org: s/__GPF_ZERO/__GFP_ZERO/, per David]
Link: https://lore.kernel.org/20260421-zerotags-v2-1-05cb1035482e@kernel.org
Fixes: adfb6609c680 ("mm/huge_memory: initialise the tags of the huge zero folio")
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d54dbb5963bdbdf8559903fe2b2343e871adcb30 ]
Implement atomic_flush, atomic_enable and atomic_disable of struct
drm_crtc_helper_funcs for vblank handling. Driver with no further
requirements can use these functions instead of adding their own.
Also simplifies the use of vblank timers.
The code has been adopted from vkms, which added the funtionality
in commit 3a0709928b17 ("drm/vkms: Add vblank events simulated by
hrtimers").
v3:
- mention vkms (Javier)
v2:
- fix docs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250916083816.30275-3-tzimmermann@suse.de
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 74afeb8128502a529041a2566febd26053a7be11 ]
The vblank timer simulates a vblank interrupt for hardware without
support. Rate-limits the display update frequency.
DRM drivers for hardware without vblank support apply display updates
ASAP. A vblank event informs DRM clients of the completed update.
Userspace compositors immediately schedule the next update, which
creates significant load on virtualization outputs. Display updates
are usually fast on virtualization outputs, as their framebuffers are
in regular system memory and there's no hardware vblank interrupt to
throttle the update rate.
The vblank timer is a HR timer that signals the vblank in software.
It limits the update frequency of a DRM driver similar to a hardware
vblank interrupt. The timer is not synchronized to the actual vblank
interval of the display.
The code has been adopted from vkms, which added the funtionality
in commit 3a0709928b17 ("drm/vkms: Add vblank events simulated by
hrtimers").
The new implementation is part of the existing vblank support,
which sets up the timer automatically. Drivers only have to start
and cancel the vblank timer as part of enabling and disabling the
CRTC. The new vblank helper library provides callbacks for struct
drm_crtc_funcs.
The standard way for handling vblank is to call drm_crtc_handle_vblank().
Drivers that require additional processing, such as vkms, can init
handle_vblank_timeout in struct drm_crtc_helper_funcs to refer to
their timeout handler.
There's a possible deadlock between drm_crtc_handle_vblank() and
hrtimer_cancel(). [1] The implementation avoids to call hrtimer_cancel()
directly and instead signals to the timer function to not restart
itself.
v4:
- fix possible race condition between timeout and atomic commit (Michael)
v3:
- avoid deadlock when cancelling timer (Ville, Lyude)
v2:
- implement vblank timer entirely in vblank helpers
- downgrade overrun warning to debug
- fix docs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/all/20250510094757.4174662-1-zengheng4@huawei.com/ # [1]
Link: https://lore.kernel.org/r/20250916083816.30275-2-tzimmermann@suse.de
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 759e8756da00aa115d504a18155b1d1ee1cc12e8 upstream.
The ACS specification does not allow a non-NCQ command to be issued while
an NCQ command is outstanding.
Commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation")
introduced a feature where a deferred non-NCQ command gets issued from a
workqueue. The design stores a single non-NCQ command per port.
However, when using Port Multipliers (PMPs), specifically PMPs that
support FIS-Based Switching (FBS), non-NCQ and NCQ commands can be mixed
on the same port, just not for the same link, see e.g. ata_std_qc_defer()
which is, and always has operated on a per-link basis.
Therefore, move the deferred_qc from struct ata_port to struct ata_link.
This way, when using a PMP with FBS, we will not needlessly defer commands
to all other links, just because one link issued a non-NCQ command while
having an NCQ command outstanding. Only commands for that specific link
will be deferred. This is in line with how PMPs with FBS worked before
commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation").
Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation")
Tested-by: Tommy Kelly <linux@tkel.ly>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f233124fb36cd57ef09f96d517a38ab4b902e15e upstream.
When using Port Multipliers (PMPs) with Command-Based Switching (CBS), you
can only issue commands to one link at a time. For PMPs with CBS, there is
already code to handle commands being sent to different links in
sata_pmp_qc_defer_cmd_switch() using ap->excl_link. sata_sil24 also makes
use of ap->excl_link.
A user on the list reported that commit 0ea84089dbf6 ("ata: libata-scsi:
avoid Non-NCQ command starvation") broke PMPs with CBS. The commit
introduced code that stores a deferred qc in ap->deferred_qc, to later be
issued via a workqueue. It turns out that this change is incompatible with
the existing ap->excl_link handling used by PMPs with CBS.
Thus, modify sata_pmp_qc_defer_cmd_switch() and sil24_qc_defer() to return
ATA_DEFER_LINK_EXCL, and make sure that the deferred QC handling via
workqueue is not used for this return value.
This way, PMPs with CBS will work once again. Note that the starvation
referenced in commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ
command starvation") can only happen on libsas ports, and libsas does not
support Port Multipliers, thus there is no harm of reverting back to the
previous way of deferring commands for PMPs with CBS.
Non-libsas ports connected to anything but a PMP with CBS (e.g. a normal
drive or a PMP with FBS) will continue using the deferred workqueue, since
it does result in lower completion latencies for non-NCQ commands, even
though the workqueue is not strictly needed to avoid starvation for
non-libsas ports.
If we want to modify the scope of the workqueue issuing to also handle
PMPs with CBS, then we should ensure that we can save both NCQ and non-NCQ
commands in ap->deferred_qc, while also removing the existing PMP CBS
handling using ap->excl_link, such that we don't duplicate features.
While at it, also add a comment explaining how the ap->excl_link mechanism
works.
Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation")
Tested-by: Tommy Kelly <linux@tkel.ly>
Reported-by: Tommy Kelly <linux@tkel.ly>
Closes: https://lore.kernel.org/linux-ide/ce09cc21-a8e9-4845-b205-35411e22fba9@tkel.ly/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e9139f765ac7048cadc9981e962acdf8b08eabf3 ]
As proposed a long while ago -- and half done by scx -- wrap the
scheduler's 'change' pattern in a guard helper.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Stable-dep-of: d658686a1331 ("sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit dec85d2fbd20de3711a71e65397dfdb40c3fa953 upstream.
The IPI and ITS MSI domains currently allocate and release LPIs
directly, then pass the selected LPI ID to the parent LPI domain. This
leaks the LPI domain's allocation policy into its child domains and
forces each child to duplicate part of the parent domain's teardown.
Make the LPI domain allocate LPIs in its .alloc() callback and release
them in a matching .free() callback. Child domains can then request a
parent interrupt without passing an implementation-specific LPI ID,
and the LPI lifetime is tied to the domain that owns the LPI
namespace.
Remove the gicv5_alloc_lpi() and gicv5_free_lpi() wrappers now that no
external caller needs to manage LPIs directly.
This is a preparatory change for an actual leakage problem in the
allocation code and therefore tagged with the same Fixes tag.
Fixes: 0f0101325876 ("irqchip/gic-v5: Add GICv5 LPI/IPI support")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260506093634.382062-2-sascha.bischoff@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 206342541fc887ae919774a43942dc883161fece ]
hid_input_report() is used in too many places to have a commit that
doesn't cross subsystem borders. Instead of changing the API, introduce
a new one when things matters in the transport layers:
- usbhid
- i2chid
This effectively revert to the old behavior for those two transport
layers.
Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c85c61d1332e1e16f020d76951baf167dcb6f7a ]
commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing
bogus memset()") enforced the provided data to be at least the size of
the declared buffer in the report descriptor to prevent a buffer
overflow. However, we can try to be smarter by providing both the buffer
size and the data size, meaning that hid_report_raw_event() can make
better decision whether we should plaining reject the buffer (buffer
overflow attempt) or if we can safely memset it to 0 and pass it to the
rest of the stack.
Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 206342541fc8 ("HID: core: introduce hid_safe_input_report()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 620055cb1036a6125fd912e7a14b47a6572b809b ]
Export __dpll_pin_change_ntf() so that drivers can send pin change
notifications from within pin callbacks, which are already called
under dpll_lock. Using dpll_pin_change_ntf() in that context would
deadlock.
Add lockdep_assert_held() to catch misuse without the lock held.
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-9-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 9e5dead140af ("ice: add dpll peer notification for paired SMA and U.FL pins")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2be467588d6bc6ec5988fc254e62a44b865912a0 ]
Currently, the DPLL subsystem reports events (creation, deletion, changes)
to userspace via Netlink. However, there is no mechanism for other kernel
components to be notified of these events directly.
Add a raw notifier chain to the DPLL core protected by dpll_lock. This
allows other kernel subsystems or drivers to register callbacks and
receive notifications when DPLL devices or pins are created, deleted,
or modified.
Define the following:
- Registration helpers: {,un}register_dpll_notifier()
- Event types: DPLL_DEVICE_CREATED, DPLL_PIN_CREATED, etc.
- Context structures: dpll_{device,pin}_notifier_info to pass relevant
data to the listeners.
The notification chain is invoked alongside the existing Netlink event
generation to ensure in-kernel listeners are kept in sync with the
subsystem state.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 9e5dead140af ("ice: add dpll peer notification for paired SMA and U.FL pins")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d0f4771e2befbe8de3a16a564c6bbd1d5502cec3 ]
Extend the DPLL core to support associating a DPLL pin with a firmware
node. This association is required to allow other subsystems (such as
network drivers) to locate and request specific DPLL pins defined in
the Device Tree or ACPI.
* Add a .fwnode field to the struct dpll_pin
* Introduce dpll_pin_fwnode_set() helper to allow the provider driver
to associate a pin with a fwnode after the pin has been allocated
* Introduce fwnode_dpll_pin_find() helper to allow consumers to search
for a registered DPLL pin using its associated fwnode handle
* Ensure the fwnode reference is properly released in dpll_pin_put()
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 9e5dead140af ("ice: add dpll peer notification for paired SMA and U.FL pins")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4f050ce06c56cfb5993268af4a5cb66ed1cd04e ]
syzbot found a data-race in bond_3ad_get_active_agg_info /
bond_3ad_state_machine_handler [1] which hints at lack of proper
RCU implementation.
Add __rcu qualifier to port->aggregator, and add proper RCU API.
[1]
BUG: KCSAN: data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler
write to 0xffff88813cf5c4b0 of 8 bytes by task 36 on cpu 0:
ad_port_selection_logic drivers/net/bonding/bond_3ad.c:1659 [inline]
bond_3ad_state_machine_handler+0x9d5/0x2d60 drivers/net/bonding/bond_3ad.c:2569
process_one_work kernel/workqueue.c:3302 [inline]
process_scheduled_works+0x4f0/0x9c0 kernel/workqueue.c:3385
worker_thread+0x58a/0x780 kernel/workqueue.c:3466
kthread+0x22a/0x280 kernel/kthread.c:436
ret_from_fork+0x146/0x330 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
read to 0xffff88813cf5c4b0 of 8 bytes by task 22063 on cpu 1:
__bond_3ad_get_active_agg_info drivers/net/bonding/bond_3ad.c:2858 [inline]
bond_3ad_get_active_agg_info+0x8c/0x230 drivers/net/bonding/bond_3ad.c:2881
bond_fill_info+0xe0f/0x10f0 drivers/net/bonding/bond_netlink.c:853
rtnl_link_info_fill net/core/rtnetlink.c:906 [inline]
rtnl_link_fill+0x1d7/0x4e0 net/core/rtnetlink.c:927
rtnl_fill_ifinfo+0xf8e/0x1380 net/core/rtnetlink.c:2168
rtmsg_ifinfo_build_skb+0x11c/0x1b0 net/core/rtnetlink.c:4453
rtmsg_ifinfo_event net/core/rtnetlink.c:4486 [inline]
rtmsg_ifinfo+0x6d/0x110 net/core/rtnetlink.c:4495
__dev_notify_flags+0x76/0x390 net/core/dev.c:9790
netif_change_flags+0xac/0xd0 net/core/dev.c:9823
do_setlink+0x905/0x2950 net/core/rtnetlink.c:3180
rtnl_group_changelink net/core/rtnetlink.c:3813 [inline]
__rtnl_newlink net/core/rtnetlink.c:3981 [inline]
rtnl_newlink+0xf55/0x1400 net/core/rtnetlink.c:4109
rtnetlink_rcv_msg+0x64b/0x720 net/core/rtnetlink.c:6995
netlink_rcv_skb+0x123/0x220 net/netlink/af_netlink.c:2550
rtnetlink_rcv+0x1c/0x30 net/core/rtnetlink.c:7022
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5a8/0x680 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x5c8/0x6f0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:787 [inline]
__sock_sendmsg net/socket.c:802 [inline]
____sys_sendmsg+0x563/0x5b0 net/socket.c:2698
___sys_sendmsg+0x195/0x1e0 net/socket.c:2752
__sys_sendmsg net/socket.c:2784 [inline]
__do_sys_sendmsg net/socket.c:2789 [inline]
__se_sys_sendmsg net/socket.c:2787 [inline]
__x64_sys_sendmsg+0xd4/0x160 net/socket.c:2787
x64_sys_call+0x194c/0x3020 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x12c/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x0000000000000000 -> 0xffff88813cf5c400
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 22063 Comm: syz.0.31122 Tainted: G W syzkaller #0 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
Fixes: 47e91f56008b ("bonding: use RCU protection for 3ad xmit path")
Reported-by: syzbot+9bb2ff2a4ab9e17307e1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69f0a82f.050a0220.3aadc4.0000.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260428123207.3809211-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4916f2e2f3fc9aef289fcd07949301e5c29094c2 ]
Currently, the churn state is printed only in sysfs. Add netlink support
so users could get the state via netlink.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260224020215.6012-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: c4f050ce06c5 ("bonding: 3ad: implement proper RCU rules for port->aggregator")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0898a817621a2f0cddca8122d9b974003fe5036d ]
The cdrom core never calls set_disk_ro() for a registered device, so
BLKROGET on a CD-ROM device always returns 0 (writable), even when the
drive has no write capabilities and writes will inevitably fail. This
causes problems for userspace that relies on BLKROGET to determine
whether a block device is read-only. For example, systemd's loop device
setup uses BLKROGET to decide whether to create a loop device with
LO_FLAGS_READ_ONLY. Without the read-only flag, writes pass through the
loop device to the CD-ROM and fail with I/O errors. systemd-fsck
similarly checks BLKROGET to decide whether to run fsck in no-repair
mode (-n).
The write-capability bits in cdi->mask come from two different sources:
CDC_DVD_RAM and CDC_CD_RW are populated by the driver from the MODE
SENSE capabilities page (page 0x2A) before register_cdrom() is called,
while CDC_MRW_W and CDC_RAM require the MMC GET CONFIGURATION command
and were only probed by cdrom_open_write() at device open time. This
meant that any attempt to compute the writable state from the full
mask at probe time was incorrect, because the GET CONFIGURATION bits
were still unset (and cdi->mask is initialized such that capabilities
are assumed present).
Fix this by factoring the GET CONFIGURATION probing out of
cdrom_open_write() into a new exported helper,
cdrom_probe_write_features(), and having sr call it from sr_probe()
right after get_capabilities() has populated the MODE SENSE bits.
register_cdrom() then calls set_disk_ro() based on the full
write-capability mask (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)
so the block layer reflects the drive's actual write support. The
feature queries used (CDF_MRW and CDF_RWRT via GET CONFIGURATION with
RT=00) report drive-level capabilities that are persistent across
media, so a single probe before register_cdrom() is sufficient and the
redundant probe at open time is dropped.
With set_disk_ro() now accurate, the long-vestigial cd->writeable flag
in sr can go: get_capabilities() used to set cd->writeable based on
the same four mask bits, but because CDC_MRW_W and CDC_RAM default to
"capability present" in cdi->mask and aren't touched by MODE SENSE,
the condition that gated cd->writeable was always true, making it
unconditionally 1. Replace the corresponding gate in sr_init_command()
with get_disk_ro(cd->disk), which turns a previously no-op check into
a real one and also catches kernel-internal bio writers that bypass
blkdev_write_iter()'s bdev_read_only() check.
The sd driver (SCSI disks) does not have this problem because it
checks the MODE SENSE Write Protect bit and calls set_disk_ro()
accordingly. The sr driver cannot use the same approach because the
MMC specification does not define the WP bit in the MODE SENSE
device-specific parameter byte for CD-ROM devices.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Daan De Meyer <daan@amutable.com>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://patch.msgid.link/20260427210139.1400-2-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f6008538384453eb4c13a3d7ff9e37ee8aee6b9 ]
EINJV2 defined new error types by moving the severity (correctable,
uncorrectable non-fatal, uncorrectable fatal) out of the "type".
ACPI 6.5 introduced EINJV2 and defined a vendor defined error type
using bit 31. This was dropped in ACPI 6.6.
Link: https://github.com/acpica/acpica/commit/e82d2d2fd145
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260421150216.11666-2-tony.luck@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 0c00cfbcfcff ("ACPI: APEI: EINJ: Fix EINJV2 memory error injection")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43eb354ecb471426e97b0ce6a0c922ec20f82027 ]
Use the correct parameter name ("__ns") for function parameter kernel-doc
to avoid 3 warnings:
Warning: include/linux/nstree.h:68 function parameter '__ns' not described in 'ns_tree_add_raw'
Warning: include/linux/nstree.h:77 function parameter '__ns' not described in 'ns_tree_add'
Warning: include/linux/nstree.h:88 function parameter '__ns' not described in 'ns_tree_remove'
Fixes: 885fc8ac0a4d ("nstree: make iterator generic")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260416215429.948898-1-rdunlap@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b194343c25084a8d2fa0c0f2c9e80f3080fd732 ]
Implement .ndo_tx_timeout for MANA so any stalled TX queue can be detected
and a device-controlled port reset for all queues can be scheduled to a
ordered workqueue. The reset for all queues on stall detection is
recomended by hardware team.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20260112130552.GA11785@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 65267c9c4f28 ("net: mana: Fix EQ leak in mana_remove on NULL port")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
