| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq updates from Thomas Gleixner:
"Two fixes for RSEQ:
- Protect the event mask modification against the membarrier() IPI as
otherwise the RmW operation is unprotected and events might be lost
- Fix the weak symbol reference in rseq selftests
The current weak RSEQ symbols definitions which were added to allow
static linkage are not working correctly as they effectively
re-define the glibc symbols leading to multiple versions of the
symbols when compiled with -fno-common.
Mark them as 'extern' to convert them from weak symbol definitions
to weak symbol references. That works with static and dynamic
linkage independent of -fcommon and -fno-common"
* tag 'core-rseq-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: Use weak symbol reference, not definition, to link with glibc
rseq: Protect event mask against membarrier IPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull TIF bit unification updates from Thomas Gleixner:
"A set of changes to consolidate the generic TIF (thread info flag)
bits accross architectures.
All architectures define the same set of generic TIF bits. This makes
it pointlessly hard to add a new generic TIF bit or to change an
existing one.
Provide a generic variant and convert the architectures which utilize
the generic entry code over to use it. The TIF space is divided into
16 generic bits and 16 architecture specific bits, which turned out to
provide enough space on both sides"
* tag 'core-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
LoongArch: Fix bitflag conflict for TIF_FIXADE
riscv: Use generic TIF bits
loongarch: Use generic TIF bits
s390/entry: Remove unused TIF flags
s390: Use generic TIF bits
x86: Use generic TIF bits
asm-generic: Provide generic TIF infrastructure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV and apic updates from Borislav Petkov:
- Add functionality to provide runtime firmware updates for the non-x86
parts of an AMD platform like the security processor (ASP) firmware,
modules etc, for example. The intent being that these updates are
interim, live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor
generating unexpected interrupts and injecting them into such guest,
thus interfering with its operation in an unexpected and negative
manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory.
The problem was that the toolchain-generated version of the code was
being executed from a different mapping of memory than what was
"assumed" during code generation, needing an ever-growing pile of
fixups for absolute memory references which are invalid in the early,
1:1 memory mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this [1]
- The usual cleanups and fixes
Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1]
* tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
x86/boot: Drop erroneous __init annotation from early_set_pages_state()
crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver
crypto: ccp - Add new HV-Fixed page allocation/free API
x86/sev: Add new dump_rmp parameter to snp_leak_pages() API
x86/startup/sev: Document the CPUID flow in the boot #VC handler
objtool: Ignore __pi___cfi_ prefixed symbols
x86/sev: Zap snp_abort()
x86/apic/savic: Do not use snp_abort()
x86/boot: Get rid of the .head.text section
x86/boot: Move startup code out of __head section
efistub/x86: Remap inittext read-execute when needed
x86/boot: Create a confined code area for startup code
x86/kbuild: Incorporate boot/startup/ via Kbuild makefile
x86/boot: Revert "Reject absolute references in .head.text"
x86/boot: Check startup code for absence of absolute relocations
objtool: Add action to check for absence of absolute relocations
x86/sev: Export startup routines for later use
x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object
x86/sev: Provide PIC aliases for SEV related data objects
x86/boot: Provide PIC aliases for 5-level paging related constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Add support on AMD for assigning QoS bandwidth counters to resources
(RMIDs) with the ability for those resources to be tracked by the
counters as long as they're assigned to them.
Previously, due to hw limitations, bandwidth counts from untracked
resources would get lost when those resources are not tracked.
Refactor the code and user interfaces to be able to also support
other, similar features on ARM, for example"
* tag 'x86_cache_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
fs/resctrl: Fix counter auto-assignment on mkdir with mbm_event enabled
MAINTAINERS: resctrl: Add myself as reviewer
x86/resctrl: Configure mbm_event mode if supported
fs/resctrl: Introduce the interface to switch between monitor modes
fs/resctrl: Disable BMEC event configuration when mbm_event mode is enabled
fs/resctrl: Introduce the interface to modify assignments in a group
fs/resctrl: Introduce mbm_L3_assignments to list assignments in a group
fs/resctrl: Auto assign counters on mkdir and clean up on group removal
fs/resctrl: Introduce mbm_assign_on_mkdir to enable assignments on mkdir
fs/resctrl: Provide interface to update the event configurations
fs/resctrl: Add event configuration directory under info/L3_MON/
fs/resctrl: Support counter read/reset with mbm_event assignment mode
x86/resctrl: Implement resctrl_arch_reset_cntr() and resctrl_arch_cntr_read()
x86/resctrl: Refactor resctrl_arch_rmid_read()
fs/resctrl: Introduce counter ID read, reset calls in mbm_event mode
fs/resctrl: Pass struct rdtgroup instead of individual members
fs/resctrl: Add the functionality to unassign MBM events
fs/resctrl: Add the functionality to assign MBM events
x86,fs/resctrl: Implement resctrl_arch_config_cntr() to assign a counter with ABMC
fs/resctrl: Introduce event configuration field in struct mon_evt
...
|
|
When a UTP error occurs in isolation, UFS is not currently recoverable.
This is because the UTP error is not considered fatal in the error
handling code, leading to either an I/O timeout or an OCS error.
Add the UTP error flag to INT_FATAL_ERRORS so the controller will be
reset in this situation.
sd 0:0:0:0: [sda] tag#38 UNKNOWN(0x2003) Result: hostbyte=0x07
driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#38 CDB: opcode=0x28 28 00 00 51 24 e2 00 00 08 00
I/O error, dev sda, sector 42542864 op 0x0:(READ) flags 0x80700 phys_seg
8 prio class 2
OCS error from controller = 9 for tag 39
pa_err[1] = 0x80000010 at 2667224756 us
pa_err: total cnt=2
dl_err[0] = 0x80000002 at 2667148060 us
dl_err[1] = 0x80002000 at 2667282844 us
No record of nl_err
No record of tl_err
No record of dme_err
No record of auto_hibern8_err
fatal_err[0] = 0x804 at 2667282836 us
---------------------------------------------------
REGISTER
---------------------------------------------------
NAME OFFSET VALUE
STD HCI SFR 0xfffffff0 0x0
AHIT 0x18 0x814
INTERRUPT STATUS 0x20 0x1000
INTERRUPT ENABLE 0x24 0x70ef5
[mkp: commit desc]
Signed-off-by: Hoyoung Seo <hy50.seo@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Message-Id: <20250930061428.617955-1-hy50.seo@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add nfsd_file_dio_alignment and use it to avoid issuing misaligned IO
using O_DIRECT. Any misaligned DIO falls back to using buffered IO.
Because misaligned DIO is now handled safely, remove the nfs modparam
'localio_O_DIRECT_semantics' that was added to require users opt-in to
the requirement that all O_DIRECT be properly DIO-aligned.
Also, introduce nfs_iov_iter_aligned_bvec() which is a variant of
iov_iter_aligned_bvec() that also verifies the offset associated with
an iov_iter is DIO-aligned. NOTE: in a parallel effort,
iov_iter_aligned_bvec() is being removed along with
iov_iter_is_aligned().
Lastly, add pr_info_ratelimited if underlying filesystem returns
-EINVAL because it was made to try O_DIRECT for IO that is not
DIO-aligned (shouldn't happen, so its best to be louder if it does).
Fixes: 3feec68563d ("nfs/localio: add direct IO enablement with sync and async IO support")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Use STATX_DIOALIGN and STATX_DIO_READ_ALIGN to get DIO alignment
attributes from the underlying filesystem and store them in the
associated nfsd_file. This is done when the nfsd_file is first
opened for each regular file.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for new AMD family 0x1a models to amd64_edac
- Add an EDAC driver for the AMD VersalNET memory controller which
reports hw errors from different IP blocks in the fabric using an
IPC-type transport
- Drop the silly static number of memory controllers in the Intel EDAC
drivers (skx, i10nm) in favor of a flexible array so that former
doesn't need to be increased with every new generation which adds
more memory controllers; along with a proper refactoring
- Add support for two Alder Lake-S SOCs to ie31200_edac
- Add an EDAC driver for ADM Cortex A72 cores, and specifically for
reporting L1 and L2 cache errors
- Last but not least, the usual fixes, cleanups and improvements all
over the subsystem
* tag 'edac_updates_for_v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (23 commits)
EDAC/versalnet: Return the correct error in mc_probe()
EDAC/mc_sysfs: Increase legacy channel support to 16
EDAC/amd64: Add support for AMD family 1Ah-based newer models
EDAC: Add a driver for the AMD Versal NET DDR controller
dt-bindings: memory-controllers: Add support for Versal NET EDAC
RAS: Export log_non_standard_event() to drivers
cdx: Export Symbols for MCDI RPC and Initialization
cdx: Split mcdi.h and reorganize headers
EDAC/skx_common: Use topology_physical_package_id() instead of open coding
EDAC: Fix wrong executable file modes for C source files
EDAC/altera: Use dev_fwnode()
EDAC/skx_common: Remove unused *NUM*_IMC macros
EDAC/i10nm: Reallocate skx_dev list if preconfigured cnt != runtime cnt
EDAC/skx_common: Remove redundant upper bound check for res->imc
EDAC/skx_common: Make skx_dev->imc[] a flexible array
EDAC/skx_common: Swap memory controller index mapping
EDAC/skx_common: Move mc_mapping to be a field inside struct skx_imc
EDAC/{skx_common,skx}: Use configuration data, not global macros
EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller
EDAC/ie31200: Add two more Intel Alder Lake-S SoCs for EDAC support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core perf code updates:
- Convert mmap() related reference counts to refcount_t. This is in
reaction to the recently fixed refcount bugs, which could have been
detected earlier and could have mitigated the bug somewhat (Thomas
Gleixner, Peter Zijlstra)
- Clean up and simplify the callchain code, in preparation for
sframes (Steven Rostedt, Josh Poimboeuf)
Uprobes updates:
- Add support to optimize usdt probes on x86-64, which gives a
substantial speedup (Jiri Olsa)
- Cleanups and fixes on x86 (Peter Zijlstra)
PMU driver updates:
- Various optimizations and fixes to the Intel PMU driver (Dapeng Mi)
Misc cleanups and fixes:
- Remove redundant __GFP_NOWARN (Qianfeng Rong)"
* tag 'perf-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
selftests/bpf: Fix uprobe_sigill test for uprobe syscall error value
uprobes/x86: Return error from uprobe syscall when not called from trampoline
perf: Skip user unwind if the task is a kernel thread
perf: Simplify get_perf_callchain() user logic
perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL
perf: Have get_perf_callchain() return NULL if crosstask and user are set
perf: Remove get_perf_callchain() init_nr argument
perf/x86: Print PMU counters bitmap in x86_pmu_show_pmu_cap()
perf/x86/intel: Add ICL_FIXED_0_ADAPTIVE bit into INTEL_FIXED_BITS_MASK
perf/x86/intel: Change macro GLOBAL_CTRL_EN_PERF_METRICS to BIT_ULL(48)
perf/x86: Add PERF_CAP_PEBS_TIMING_INFO flag
perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error
perf/x86/intel: Use early_initcall() to hook bts_init()
uprobes: Remove redundant __GFP_NOWARN
selftests/seccomp: validate uprobe syscall passes through seccomp
seccomp: passthrough uprobe systemcall without filtering
selftests/bpf: Fix uprobe syscall shadow stack test
selftests/bpf: Change test_uretprobe_regs_change for uprobe and uretprobe
selftests/bpf: Add uprobe_regs_equal test
selftests/bpf: Add optimized usdt variant for basic usdt test
...
|
|
Rework the vast majority of KVM's exports to expose symbols only to KVM
submodules, i.e. to x86's kvm-{amd,intel}.ko and PPC's kvm-{pr,hv}.ko.
With few exceptions, KVM's exported APIs are intended (and safe) for KVM-
internal usage only.
Keep kvm_get_kvm(), kvm_get_kvm_safe(), and kvm_put_kvm() as normal
exports, as they are needed by VFIO, and are generally safe for external
usage (though ideally even the get/put APIs would be KVM-internal, and
VFIO would pin a VM by grabbing a reference to its associated file).
Implement a framework in kvm_types.h in anticipation of providing a macro
to restrict KVM-specific kernel exports, i.e. to provide symbol exports
for KVM if and only if KVM is built as one or more modules.
Link: https://lore.kernel.org/r/20250919003303.1355064-3-seanjc@google.com
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling to when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and other
resources (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
warning was getting triggered on certain topologies (Peter
Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)"
* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix some typos in include/linux/preempt.h
sched: Make migrate_{en,dis}able() inline
rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
sched/fair: Do not balance task to a throttled cfs_rq
sched/fair: Do not special case tasks in throttled hierarchy
sched/fair: update_cfs_group() for throttled cfs_rqs
sched/fair: Propagate load for throttled cfs_rq
sched/fair: Get rid of throttled_lb_pair()
sched/fair: Task based throttle time accounting
sched/fair: Switch to task based throttle model
sched/fair: Implement throttle task work and related helpers
sched/fair: Add related data structure for task based throttle
sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
sched: Move STDL_INIT() functions out-of-line
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
sched/deadline: Fix race in push_dl_task()
|
|
HEAD
KVM SEV-SNP CipherText Hiding support for 6.18
Add support for SEV-SNP's CipherText Hiding, an opt-in feature that prevents
unauthorized CPU accesses from reading the ciphertext of SNP guest private
memory, e.g. to attempt an offline attack. Instead of ciphertext, the CPU
will always read back all FFs when CipherText Hiding is enabled.
Add new module parameter to the KVM module to enable CipherText Hiding and
control the number of ASIDs that can be used for VMs with CipherText Hiding,
which is in effect the number of SNP VMs. When CipherText Hiding is enabled,
the shared SEV-ES/SEV-SNP ASID space is split into separate ranges for SEV-ES
and SEV-SNP guests, i.e. ASIDs that can be used for CipherText Hiding cannot
be used to run SEV-ES guests.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.18
1. Add PTW feature detection on new hardware.
2. Add sign extension with kernel MMIO/IOCSR emulation.
3. Improve in-kernel IPI emulation.
4. Improve in-kernel PCH-PIC emulation.
5. Move kvm_iocsr tracepoint out of generic code.
|
|
KVM/riscv changes for 6.18
- Added SBI FWFT extension for Guest/VM with misaligned
delegation and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V such as
access_tracking_perf_test, dirty_log_perf_test,
memslot_modification_stress_test, memslot_perf_test,
mmu_stress_test, and rseq_test
- Added SBI v3.0 PMU enhancements in KVM and perf driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.18
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This will
hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then allows
a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #3
- Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
visiting from an MMU notifier
- Fixes to the TLB match process and TLB invalidation range for
managing the VCNR pseudo-TLB
- Prevent SPE from erroneously profiling guests due to UNKNOWN reset
values in PMSCR_EL1
- Fix save/restore of host MDCR_EL2 to account for eagerly programming
at vcpu_load() on VHE systems
- Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios
where an xarray's spinlock was nested with a *raw* spinlock
- Permit stage-2 read permission aborts which are possible in the case
of NV depending on the guest hypervisor's stage-2 translation
- Call raw_spin_unlock() instead of the internal spinlock API
- Fix parameter ordering when assigning VBAR_EL1
[Pull into kvm/master to fix conflicts. - Paolo]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Extensive cpuset code cleanup and refactoring work with no functional
changes: CPU mask computation logic refactoring, introducing new
helpers, removing redundant code paths, and improving error handling
for better maintainability.
- A few bug fixes to cpuset including fixes for partition creation
failures when isolcpus is in use, missing error returns, and null
pointer access prevention in free_tmpmasks().
- Core cgroup changes include replacing the global percpu_rwsem with
per-threadgroup rwsem when writing to cgroup.procs for better
scalability, workqueue conversions to use WQ_PERCPU and
system_percpu_wq to prepare for workqueue default switching from
percpu to unbound, and removal of unused code including the
post_attach callback.
- New cgroup.stat.local time accounting feature that tracks frozen time
duration.
- Misc changes including selftests updates (new freezer time tests and
backward compatibility fixes), documentation sync, string function
safety improvements, and 64-bit division fixes.
* tag 'cgroup-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (39 commits)
cpuset: remove is_prs_invalid helper
cpuset: remove impossible warning in update_parent_effective_cpumask
cpuset: remove redundant special case for null input in node mask update
cpuset: fix missing error return in update_cpumask
cpuset: Use new excpus for nocpu error check when enabling root partition
cpuset: fix failure to enable isolated partition when containing isolcpus
Documentation: cgroup-v2: Sync manual toctree
cpuset: use partition_cpus_change for setting exclusive cpus
cpuset: use parse_cpulist for setting cpus.exclusive
cpuset: introduce partition_cpus_change
cpuset: refactor cpus_allowed_validate_change
cpuset: refactor out validate_partition
cpuset: introduce cpus_excl_conflict and mems_excl_conflict helpers
cpuset: refactor CPU mask buffer parsing logic
cpuset: Refactor exclusive CPU mask computation logic
cpuset: change return type of is_partition_[in]valid to bool
cpuset: remove unused assignment to trialcs->partition_root_state
cpuset: move the root cpuset write check earlier
cgroup/cpuset: Remove redundant rcu_read_lock/unlock() in spin_lock
cgroup: Remove redundant rcu_read_lock/unlock() in spin_lock
...
|
|
Pull workqueue updates from Tejun Heo:
- WQ_PERCPU was added to remaining alloc_workqueue() users and
system_wq usage was replaced with system_percpu_wq and
system_unbound_wq with system_dfl_wq.
These are equivalent conversions with no functional changes,
preparing for switching default to unbound workqueues from percpu.
- A handshake mechanism was added for canceling BH workers to avoid
live lock scenarios under PREEMPT_RT.
- Unnecessary rcu_read_lock/unlock() calls were dropped in
wq_watchdog_timer_fn() and workqueue_congested().
- Documentation was fixed to resolve texinfodocs warnings.
* tag 'wq-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix texinfodocs warning for WQ_* flags reference
workqueue: WQ_PERCPU added to alloc_workqueue users
workqueue: replace use of system_wq with system_percpu_wq
workqueue: replace use of system_unbound_wq with system_dfl_wq
workqueue: Provide a handshake for canceling BH workers
workqueue: Remove rcu_read_lock/unlock() in wq_watchdog_timer_fn()
workqueue: Remove redundant rcu_read_lock/unlock() in workqueue_congested()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Code organization cleanup. Separate internal types and accessors to
ext_internal.h to reduce the size of ext.c and improve
maintainability.
- Prepare for cgroup sub-scheduler support by adding @sch parameter to
various functions and helpers, reorganizing scheduler instance
handling, and dropping obsolete helpers like scx_kf_exit() and
kf_cpu_valid().
- Add new scx_bpf_cpu_curr() and scx_bpf_locked_rq() BPF helpers to
provide safer access patterns with proper RCU protection.
scx_bpf_cpu_rq() is deprecated with warnings due to potential race
conditions.
- Improve debugging with migration-disabled counter in error state
dumps, SCX_EFLAG_INITIALIZED flag, bitfields for warning flags, and
other enhancements to help diagnose issues.
- Use cgroup_lock/unlock() for cgroup synchronization instead of
scx_cgroup_rwsem based synchronization. This is simpler and allows
enable/disable paths to synchronize against cgroup changes
independent of the CPU controller.
- rhashtable_lookup() replacement to avoid redundant RCU locking was
reverted due to RCU usage warnings. Will be redone once rhashtable is
updated to use rcu_dereference_all().
- Other misc updates and fixes including bypass handling improvements,
scx_task_iter_relock() improvements, tools/sched_ext updates, and
compatibility helpers.
* tag 'sched_ext-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (28 commits)
Revert "sched_ext: Use rhashtable_lookup() instead of rhashtable_lookup_fast()"
sched_ext: Misc updates around scx_sched instance pointer
sched_ext: Drop scx_kf_exit() and scx_kf_error()
sched_ext: Add the @sch parameter to scx_dsq_insert_preamble/commit()
sched_ext: Drop kf_cpu_valid()
sched_ext: Add the @sch parameter to ext_idle helpers
sched_ext: Add the @sch parameter to __bstr_format()
sched_ext: Separate out scx_kick_cpu() and add @sch to it
tools/sched_ext: scx_qmap: Make debug output quieter by default
sched_ext: Make qmap dump operation non-destructive
sched_ext: Add SCX_EFLAG_INITIALIZED to indicate successful ops.init()
sched_ext: Use bitfields for boolean warning flags
sched_ext: Fix stray scx_root usage in task_can_run_on_remote_rq()
sched_ext: Improve SCX_KF_DISPATCH comment
sched_ext: Use rhashtable_lookup() instead of rhashtable_lookup_fast()
sched_ext: Verify RCU protection in scx_bpf_cpu_curr()
sched_ext: Add migration-disabled counter to error state dump
sched_ext: Fix NULL dereference in scx_bpf_cpu_rq() warning
tools/sched_ext: Add compat helper for scx_bpf_cpu_curr()
sched_ext: deprecation warn for scx_bpf_cpu_rq()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Move the management of the LSM BPF security blobs into the framework
In order to enable multiple LSMs we need to allocate and free the
various security blobs in the LSM framework and not the individual
LSMs as they would end up stepping all over each other.
- Leverage the lsm_bdev_alloc() helper in lsm_bdev_alloc()
Make better use of our existing helper functions to reduce some code
duplication.
- Update the Rust cred code to use 'sync::aref'
Part of a larger effort to move the Rust code over to the 'sync'
module.
- Make CONFIG_LSM dependent on CONFIG_SECURITY
As the CONFIG_LSM Kconfig setting is an ordered list of the LSMs to
enable a boot, it obviously doesn't make much sense to enable this
when CONFIG_SECURITY is disabled.
- Update the LSM and CREDENTIALS sections in MAINTAINERS with Rusty
bits
Add the Rust helper files to the associated LSM and CREDENTIALS
entries int the MAINTAINERS file. We're trying to improve the
communication between the two groups and making sure we're all aware
of what is going on via cross-posting to the relevant lists is a good
way to start.
* tag 'lsm-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: CONFIG_LSM can depend on CONFIG_SECURITY
MAINTAINERS: add the associated Rust helper to the CREDENTIALS section
MAINTAINERS: add the associated Rust helper to the LSM section
rust,cred: update AlwaysRefCounted import to sync::aref
security: use umax() to improve code
lsm,selinux: Add LSM blob support for BPF objects
lsm: use lsm_blob_alloc() in lsm_bdev_alloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
- Proper audit support for multiple LSMs
As the audit subsystem predated the work to enable multiple LSMs,
some additional work was needed to support logging the different LSM
labels for the subjects/tasks and objects on the system. Casey's
patches add new auxillary records for subjects and objects that
convey the additional labels.
- Ensure fanotify audit events are always generated
Generally speaking security relevant subsystems always generate audit
events, unless explicitly ignored. However, up to this point fanotify
events had been ignored by default, but starting with this pull
request fanotify follows convention and generates audit events by
default.
- Replace an instance of strcpy() with strscpy()
- Minor indentation, style, and comment fixes
* tag 'audit-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix skb leak when audit rate limit is exceeded
audit: init ab->skb_list earlier in audit_buffer_alloc()
audit: add record for multiple object contexts
audit: add record for multiple task security contexts
lsm: security_lsmblob_to_secctx module selection
audit: create audit_stamp structure
audit: add a missing tab
audit: record fanotify event regardless of presence of rules
audit: fix typo in auditfilter.c comment
audit: Replace deprecated strcpy() with strscpy()
audit: fix indentation in audit_log_exit()
|
|
- Implement haptic touchpad support (Angela Czubak and Jonathan Denose)
|
|
- rework hidraw ioctls (Benjamin Tissoires)
|
|
Instead of sharing sd->defer_list & sd->defer_count with
many cpus, add one pair for each NUMA node.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Get rid of sd->defer_lock and adopt llist operations.
We optimize skb_attempt_defer_free() for the common case,
where the packet is queued. Otherwise sd->defer_count
is increasing, until skb_defer_free_flush() clears it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is preparation work to remove the softnet_data.defer_lock,
as it is contended on hosts with large number of cores.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After 42e2a9e11a1d ("net: phy: dp83640: improve phydev and driver
removal handling") we can stop exporting also phy_driver_unregister().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/2bab950e-4b70-4030-b997-03f48379586f@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The active-backup bonding mode supports XFRM ESP offload. However, when
a bond is added using command like `ip link add bond0 type bond mode 1
miimon 100`, the `ethtool -k` command shows that the XFRM ESP offload is
disabled. This occurs because, in bond_newlink(), we change bond link
first and register bond device later. So the XFRM feature update in
bond_option_mode_set() is not called as the bond device is not yet
registered, leading to the offload feature not being set successfully.
To resolve this issue, we can modify the code order in bond_newlink() to
ensure that the bond device is registered first before changing the bond
link parameters. This change will allow the XFRM ESP offload feature to be
correctly enabled.
Fixes: 007ab5345545 ("bonding: fix feature flag setting at init time")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250925023304.472186-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce a new document, flow_control.rst, to provide a comprehensive
guide on Ethernet Flow Control in Linux. The guide explains how flow
control works, how autonegotiation resolves pause capabilities, and how
to configure it using ethtool and Netlink.
In parallel, document the pause and pause-stat attributes in the
ethtool.yaml netlink spec. This enables the ynl tool to generate
kernel-doc comments for the corresponding enums in the UAPI header,
making the C interface self-documenting.
Finally, replace the legacy flow control section in phy.rst with a
reference to the new document and add pointers in the relevant C source
files.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250924120241.724850-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix the migration of a Xen virq to another cpu plus some related
cleanup work
- clean up Xen-PV mode specific code, resulting in removing some of
that code in the resulting binary in case CONFIG_XEN_PV is not set
- fixes and cleanup for suspend handling under Xen
* tag 'for-linus-6.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: take system_transition_mutex on suspend
xen/manage: Fix suspend error path
xen/events: Update virq_to_irq on migration
xen/events: Return -EEXIST for bound VIRQs
xen/events: Cleanup find_virq() return codes
x86/xen: select HIBERNATE_CALLBACKS more directly
drivers/xen/gntdev: use xen_pv_domain() instead of cached value
xen: replace XENFEAT_auto_translated_physmap with xen_pv_domain()
xen: rework xen_pv_domain()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira
Rajeev, Cédric Le Goater, Christophe Leroy, Erhard Furtner, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence,
Kajol Jain, Kienan Stewart, Linus Walleij, Mahesh Salgaonkar, Nam Cao,
Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas
Gleixner, Thomas Huth, Thorsten Blum, Tyrel Datwyler, and Venkat Rao
Bagalkote.
* tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (49 commits)
powerpc/pseries: Define __u{8,32} types in papr_hvpipe_hdr struct
genirq/msi: Remove msi_post_free()
powerpc/perf/vpa-dtl: Add documentation for VPA dispatch trace log PMU
powerpc/perf/vpa-dtl: Handle the writing of perf record when aux wake up is needed
powerpc/perf/vpa-dtl: Add support to capture DTL data in aux buffer
powerpc/perf/vpa-dtl: Add support to setup and free aux buffer for capturing DTL data
docs: ABI: sysfs-bus-event_source-devices-vpa-dtl: Document sysfs event format entries for vpa_dtl pmu
powerpc/vpa_dtl: Add interface to expose vpa dtl counters via perf
powerpc/time: Expose boot_tb via accessor
powerpc/32: Remove PAGE_KERNEL_TEXT to fix startup failure
powerpc/fprobe: fix updated fprobe for function-graph tracer
powerpc/ftrace: support CONFIG_FUNCTION_GRAPH_RETVAL
powerpc64/modules: replace stub allocation sentinel with an explicit counter
powerpc64/modules: correctly iterate over stubs in setup_ftrace_ool_stubs
powerpc/ftrace: ensure ftrace record ops are always set for NOPs
powerpc/603: Really copy kernel PGD entries into all PGDIRs
powerpc/8xx: Remove left-over instruction and comments in DataStoreTLBMiss handler
powerpc/pseries: HVPIPE changes to support migration
powerpc/pseries: Enable hvpipe with ibm,set-system-parameter RTAS
powerpc/pseries: Enable HVPIPE event message interrupt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Refactor SCLP memory hotplug code
- Introduce common boot_panic() decompressor helper macro and use it to
get rid of nearly few identical implementations
- Take into account additional key generation flags and forward it to
the ep11 implementation. With that allow users to modify the key
generation process, e.g. provide valid combinations of XCP_BLOB_*
flags
- Replace kmalloc() + copy_from_user() with memdup_user_nul() in s390
debug facility and HMC driver
- Add DAX support for DCSS memory block devices
- Make the compiler statement attribute "assume" available with a new
__assume macro
- Rework ffs() and fls() family bitops functions, including source code
improvements and generated code optimizations. Use the newly
introduced __assume macro for that
- Enable additional network features in default configurations
- Use __GFP_ACCOUNT flag for user page table allocations to add missing
kmemcg accounting
- Add WQ_PERCPU flag to explicitly request the use of the per-CPU
workqueue for 3590 tape driver
- Switch power reading to the per-CPU and the Hiperdispatch to the
default workqueue
- Add memory allocation profiling hooks to allow better profiling data
and the /proc/allocinfo output similar to other architectures
* tag 's390-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits)
s390/mm: Add memory allocation profiling hooks
s390: Replace use of system_wq with system_dfl_wq
s390/diag324: Replace use of system_wq with system_percpu_wq
s390/tape: Add WQ_PERCPU to alloc_workqueue users
s390/bitops: Switch to generic ffs() if supported by compiler
s390/bitops: Switch to generic fls(), fls64(), etc.
s390/mm: Use __GFP_ACCOUNT for user page table allocations
s390/configs: Enable additional network features
s390/bitops: Cleanup __flogr()
s390/bitops: Use __assume() for __flogr() inline assembly return value
compiler_types: Add __assume macro
s390/bitops: Limit return value range of __flogr()
s390/dcssblk: Add DAX support
s390/hmcdrv: Replace kmalloc() + copy_from_user() with memdup_user_nul()
s390/debug: Replace kmalloc() + copy_from_user() with memdup_user_nul()
s390/pkey: Forward keygenflags to ep11_unwrapkey
s390/boot: Add common boot_panic() code
s390/bitops: Optimize inlining
s390/bitops: Slightly optimize ffs() and fls64()
s390/sclp: Move memory hotplug code for better modularity
...
|
|
Add new callback operations for a dpll device:
- phase_offset_avg_factor_get(...) - to obtain current phase offset
averaging factor from dpll device,
- phase_offset_avg_factor_set(...) - to set phase offset averaging factor
Obtain the factor value using the get callback and provide it to the user
if the device driver implement this callback. Execute the set callback upon
user requests, if the driver implement it.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
v2:
* do not require 'set' callback to retrieve current value
* always call 'set' callback regardless of current value
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250927084912.2343597-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add dpll device level attribute DPLL_A_PHASE_OFFSET_AVG_FACTOR to allow
control over a calculation of reported phase offset value. Attribute is
present, if the driver provides such capability, otherwise attribute
shall not be present.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250927084912.2343597-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-09-28
* tag 'mlx5-next-lag' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: IFC add balance ID and LAG per MP group bits
net/mlx5: Add IFC bit for TIR/SQ order capability
====================
Link: https://patch.msgid.link/1759093989-841873-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's good stuff across the board, including some nice mm
improvements for CPUs with the 'noabort' BBML2 feature and a clever
patch to allow ptdump to play nicely with block mappings in the
vmalloc area.
Confidential computing:
- Add support for accepting secrets from firmware (e.g. ACPI CCEL)
and mapping them with appropriate attributes.
CPU features:
- Advertise atomic floating-point instructions to userspace
- Extend Spectre workarounds to cover additional Arm CPU variants
- Extend list of CPUs that support break-before-make level 2 and
guarantee not to generate TLB conflict aborts for changes of
mapping granularity (BBML2_NOABORT)
- Add GCS support to our uprobes implementation.
Documentation:
- Remove bogus SME documentation concerning register state when
entering/exiting streaming mode.
Entry code:
- Switch over to the generic IRQ entry code (GENERIC_IRQ_ENTRY)
- Micro-optimise syscall entry path with a compiler branch hint.
Memory management:
- Enable huge mappings in vmalloc space even when kernel page-table
dumping is enabled
- Tidy up the types used in our early MMU setup code
- Rework rodata= for closer parity with the behaviour on x86
- For CPUs implementing BBML2_NOABORT, utilise block mappings in the
linear map even when rodata= applies to virtual aliases
- Don't re-allocate the virtual region between '_text' and '_stext',
as doing so confused tools parsing /proc/vmcore.
Miscellaneous:
- Clean-up Kconfig menuconfig text for architecture features
- Avoid redundant bitmap_empty() during determination of supported
SME vector lengths
- Re-enable warnings when building the 32-bit vDSO object
- Avoid breaking our eggs at the wrong end.
Perf and PMUs:
- Support for v3 of the Hisilicon L3C PMU
- Support for Hisilicon's MN and NoC PMUs
- Support for Fujitsu's Uncore PMU
- Support for SPE's extended event filtering feature
- Preparatory work to enable data source filtering in SPE
- Support for multiple lanes in the DWC PCIe PMU
- Support for i.MX94 in the IMX DDR PMU driver
- MAINTAINERS update (Thank you, Yicong)
- Minor driver fixes (PERF_IDX2OFF() overflow, CMN register offsets).
Selftests:
- Add basic LSFE check to the existing hwcaps test
- Support nolibc in GCS tests
- Extend SVE ptrace test to pass unsupported regsets and invalid
vector lengths
- Minor cleanups (typos, cosmetic changes).
System registers:
- Fix ID_PFR1_EL1 definition
- Fix incorrect signedness of some fields in ID_AA64MMFR4_EL1
- Sync TCR_EL1 definition with the latest Arm ARM (L.b)
- Be stricter about the input fed into our AWK sysreg generator
script
- Typo fixes and removal of redundant definitions.
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code.
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64: cpufeature: Remove duplicate asm/mmu.h header
arm64: Kconfig: Make CPU_BIG_ENDIAN depend on BROKEN
perf/dwc_pcie: Fix use of uninitialized variable
arm/syscalls: mark syscall invocation as likely in invoke_syscall
Documentation: hisi-pmu: Add introduction to HiSilicon V3 PMU
Documentation: hisi-pmu: Fix of minor format error
drivers/perf: hisi: Add support for L3C PMU v3
drivers/perf: hisi: Refactor the event configuration of L3C PMU
drivers/perf: hisi: Extend the field of tt_core
drivers/perf: hisi: Extract the event filter check of L3C PMU
drivers/perf: hisi: Simplify the probe process of each L3C PMU version
drivers/perf: hisi: Export hisi_uncore_pmu_isr()
drivers/perf: hisi: Relax the event ID check in the framework
perf: Fujitsu: Add the Uncore PMU driver
arm64: map [_text, _stext) virtual address range non-executable+read-only
arm64/sysreg: Update TCR_EL1 register
arm64: Enable vmalloc-huge with ptdump
arm64: cpufeature: add Neoverse-V3AE to BBML2 allow list
arm64: errata: Apply workarounds for Neoverse-V3AE
arm64: cputype: Add Neoverse-V3AE definitions
...
|
|
This reverts commit 4effb335b5dab08cb6e2c38d038910f8b527cfc9.
This was a benefit for UDP flood case, which was later greatly improved
with commits 6471658dc66c ("udp: use skb_attempt_defer_free()")
and b650bf0977d3 ("udp: remove busylock and add per NUMA queues").
Apparently blamed commit added a regression for RAW sockets, possibly
because they do not use the dual RX queue strategy that UDP has.
sock_queue_rcv_skb_reason() and RAW recvmsg() compete for sk_receive_buf
and sk_rmem_alloc changes, and them being in the same
cache line reduce performance.
Fixes: 4effb335b5da ("net: group sk_backlog and sk_receive_queue")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202509281326.f605b4eb-lkp@intel.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250929182112.824154-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To leverage the auto-tuning improvements brought by commit 2da35e4b4df9
("Merge branch 'tcp-receive-side-improvements'"), the MPTCP stack need
to access the mentioned helper.
Acked-by: Geliang Tang <geliang@kernel.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-2-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- MAINTAINERS: add a sub-entry for the Qualcomm bluetooth driver
- Avoid a couple dozen -Wflex-array-member-not-at-end warnings
- bcsp: receive data only if registered
- HCI: Fix using LE/ACL buffers for ISO packets
- hci_core: Detect if an ISO link has stalled
- ISO: Don't initiate CIS connections if there are no buffers
- ISO: Use sk_sndtimeo as conn_timeout
drivers:
- btusb: Check for unexpected bytes when defragmenting HCI frames
- btusb: Add new VID/PID 13d3/3627 for MT7925
- btusb: Add new VID/PID 13d3/3633 for MT7922
- btusb: Add USB ID 2001:332a for D-Link AX9U rev. A1
- btintel: Add support for BlazarIW core
- btintel_pcie: Add support for _suspend() / _resume()
- btintel_pcie: Define hdev->wakeup() callback
- btintel_pcie: Add Bluetooth core/platform as comments
- btintel_pcie: Add id of Scorpious, Panther Lake-H484
- btintel_pcie: Refactor Device Coredump
* tag 'for-net-next-2025-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (30 commits)
Bluetooth: Avoid a couple dozen -Wflex-array-member-not-at-end warnings
Bluetooth: hci_sync: Fix using random address for BIG/PA advertisements
Bluetooth: ISO: don't leak skb in ISO_CONT RX
Bluetooth: ISO: free rx_skb if not consumed
Bluetooth: ISO: Fix possible UAF on iso_conn_free
Bluetooth: SCO: Fix UAF on sco_conn_free
Bluetooth: bcsp: receive data only if registered
Bluetooth: btusb: Add new VID/PID 13d3/3633 for MT7922
Bluetooth: btusb: Add new VID/PID 13d3/3627 for MT7925
Bluetooth: remove duplicate h4_recv_buf() in header
Bluetooth: btusb: Check for unexpected bytes when defragmenting HCI frames
Bluetooth: hci_core: Print information of hcon on hci_low_sent
Bluetooth: hci_core: Print number of packets in conn->data_q
Bluetooth: Add function and line information to bt_dbg
Bluetooth: MGMT: Fix not exposing debug UUID on MGMT_OP_READ_EXP_FEATURES_INFO
Bluetooth: hci_core: Detect if an ISO link has stalled
Bluetooth: ISO: Use sk_sndtimeo as conn_timeout
Bluetooth: HCI: Fix using LE/ACL buffers for ISO packets
Bluetooth: ISO: Don't initiate CIS connections if there are no buffers
MAINTAINERS: add a sub-entry for the Qualcomm bluetooth driver
...
====================
Link: https://patch.msgid.link/20250927154616.1032839-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__ptr_ring_zero_tail currently does the - 1 operation twice:
- during initialization of head
- at each loop iteration
Let's just do it in one place, all we need to do
is adjust the loop condition. this is better:
- a slightly clearer logic with less duplication
- uses prefix -- we don't need to save the old value
- one less - 1 operation - for example, when ring is empty
we now don't do - 1 at all, existing code does it once
Text size shrinks from 15081 to 15050 bytes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/bcd630c7edc628e20d4f8e037341f26c90ab4365.1758976026.git.mst@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One notable addition is the creation of the 'transitional' keyword for
kconfig so CONFIG renaming can go more smoothly.
This has been a long-standing deficiency, and with the renaming of
CONFIG_CFI_CLANG to CONFIG_CFI (since GCC will soon have KCFI
support), this came up again.
The breadth of the diffstat is mainly this renaming.
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI"
* tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add str_assert_deassert() helper
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
kconfig: Add transitional symbol attribute for migration support
kconfig: Fix BrokenPipeError warnings in selftests
gcc-plugins: Remove TODO_verify_il for GCC >= 16
stddef: Introduce __TRAILING_OVERLAP()
stddef: Remove token-pasting in TRAILING_OVERLAP()
lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- binfmt_elf: preserve original ELF e_flags for core dumps (Svetlana
Parfenova)
- exec: Fix incorrect type for ret (Xichao Zhao)
- binfmt_elf: Replace offsetof() with struct_size() in fill_note_info()
(Xichao Zhao)
* tag 'execve-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: preserve original ELF e_flags for core dumps
binfmt_elf: Replace offsetof() with struct_size() in fill_note_info()
exec: Fix incorrect type for ret
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull ffs const-attribute cleanups from Kees Cook:
"While working on various hardening refactoring a while back we
encountered inconsistencies in the application of __attribute_const__
on the ffs() family of functions.
This series fixes this across all archs and adds KUnit tests.
Notably, this found a theoretical underflow in PCI (also fixed here)
and uncovered an inefficiency in ARC (fixed in the ARC arch PR). I
kept the series separate from the general hardening PR since it is a
stand-alone "topic".
- PCI: Fix theoretical underflow in use of ffs().
- Universally apply __attribute_const__ to all architecture's
ffs()-family of functions.
- Add KUnit tests for ffs() behavior and const-ness"
* tag 'ffs-const-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
KUnit: ffs: Validate all the __attribute_const__ annotations
sparc: Add __attribute_const__ to ffs()-family implementations
xtensa: Add __attribute_const__ to ffs()-family implementations
s390: Add __attribute_const__ to ffs()-family implementations
parisc: Add __attribute_const__ to ffs()-family implementations
mips: Add __attribute_const__ to ffs()-family implementations
m68k: Add __attribute_const__ to ffs()-family implementations
openrisc: Add __attribute_const__ to ffs()-family implementations
riscv: Add __attribute_const__ to ffs()-family implementations
hexagon: Add __attribute_const__ to ffs()-family implementations
alpha: Add __attribute_const__ to ffs()-family implementations
sh: Add __attribute_const__ to ffs()-family implementations
powerpc: Add __attribute_const__ to ffs()-family implementations
x86: Add __attribute_const__ to ffs()-family implementations
csky: Add __attribute_const__ to ffs()-family implementations
bitops: Add __attribute_const__ to generic ffs()-family implementations
KUnit: Introduce ffs()-family tests
PCI: Test for bit underflow in pcie_set_readrq()
|
|
Pull interleaved SHA-256 hashing support from Eric Biggers:
"Optimize fsverity with 2-way interleaved hashing
Add support for 2-way interleaved SHA-256 hashing to lib/crypto/, and
make fsverity use it for faster file data verification. This improves
fsverity performance on many x86_64 and arm64 processors.
Later, I plan to make dm-verity use this too"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: Use 2-way interleaved SHA-256 hashing when supported
fsverity: Remove inode parameter from fsverity_hash_block()
lib/crypto: tests: Add tests and benchmark for sha256_finup_2x()
lib/crypto: x86/sha256: Add support for 2-way interleaved hashing
lib/crypto: arm64/sha256: Add support for 2-way interleaved hashing
lib/crypto: sha256: Add support for 2-way interleaved hashing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add a RISC-V optimized implementation of Poly1305. This code was
written by Andy Polyakov and contributed by Zhihang Shao.
- Migrate the MD5 code into lib/crypto/, and add KUnit tests for MD5.
Yes, it's still the 90s, and several kernel subsystems are still
using MD5 for legacy use cases. As long as that remains the case,
it's helpful to clean it up in the same way as I've been doing for
other algorithms.
Later, I plan to convert most of these users of MD5 to use the new
MD5 library API instead of the generic crypto API.
- Simplify the organization of the ChaCha, Poly1305, BLAKE2s, and
Curve25519 code.
Consolidate these into one module per algorithm, and centralize the
configuration and build process. This is the same reorganization that
has already been successful for SHA-1 and SHA-2.
- Remove the unused crypto_kpp API for Curve25519.
- Migrate the BLAKE2s and Curve25519 self-tests to KUnit.
- Always enable the architecture-optimized BLAKE2s code.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (38 commits)
crypto: md5 - Implement export_core() and import_core()
wireguard: kconfig: simplify crypto kconfig selections
lib/crypto: tests: Enable Curve25519 test when CRYPTO_SELFTESTS
lib/crypto: curve25519: Consolidate into single module
lib/crypto: curve25519: Move a couple functions out-of-line
lib/crypto: tests: Add Curve25519 benchmark
lib/crypto: tests: Migrate Curve25519 self-test to KUnit
crypto: curve25519 - Remove unused kpp support
crypto: testmgr - Remove curve25519 kpp tests
crypto: x86/curve25519 - Remove unused kpp support
crypto: powerpc/curve25519 - Remove unused kpp support
crypto: arm/curve25519 - Remove unused kpp support
crypto: hisilicon/hpre - Remove unused curve25519 kpp support
lib/crypto: tests: Add KUnit tests for BLAKE2s
lib/crypto: blake2s: Consolidate into single C translation unit
lib/crypto: blake2s: Move generic code into blake2s.c
lib/crypto: blake2s: Always enable arch-optimized BLAKE2s code
lib/crypto: blake2s: Remove obsolete self-test
lib/crypto: x86/blake2s: Reduce size of BLAKE2S_SIGMA2
lib/crypto: chacha: Consolidate into single module
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Update crc_kunit to test the CRC functions in softirq and hardirq
contexts, similar to what the lib/crypto/ KUnit tests do. Move the
helper function needed to do this into a common header.
This is useful mainly to test fallback code paths for when
FPU/SIMD/vector registers are unusable"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
Documentation/staging: Fix typo and incorrect citation in crc32.rst
lib/crc: Drop inline from all *_mod_init_arch() functions
lib/crc: Use underlying functions instead of crypto_simd_usable()
lib/crc: crc_kunit: Test CRC computation in interrupt contexts
kunit, lib/crypto: Move run_irq_test() to common header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This adds a dlm_release_lockspace() flag to request that node-failure
recovery be performed for the node leaving the lockspace.
The implementation of this flag requires coordination with userland
clustering components. It's been requested for use by GFS2"
* tag 'dlm-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: check for undefined release_option values
dlm: handle release_option as unsigned
dlm: move to rinfo for all middle conversion cases
dlm: handle invalid lockspace member remove
dlm: add new flag DLM_RELEASE_RECOVER for dlm_lockspace_release
dlm: add new configfs entry release_recover for lockspace members
dlm: add new RELEASE_RECOVER uevent attribute for release_lockspace
dlm: use defines for force values in dlm_release_lockspace
dlm: check for defined force value in dlm_lockspace_release
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs
Pull hfs updates from Viacheslav Dubeyko:
"This contains several fixes of syzbot reported issues, HFS/HFS+ fixes
of xfstests failures, and rework of HFS/HFS+ debug output subsystem.
- Kang Chen fixed a slab-out-of-bounds issue in hfsplus_uni2asc()
when hfsplus_uni2asc() is called from hfsplus_listxattr().
- Yang Chenzhi fixed a crash in hfsplus_bmap_alloc() if record offset
or length is larger than node_size.
- Yangtao Li corrected the error code from hfsplus_fill_super() if
Catalog File contains corrupted record for the case of hidden
directory's type.
- KMSAN uninit-value fixes: hfs_find_set_zero_bits() and
__hfsplus_ext_cache_extent() use kzalloc() instead of kmalloc(),
and in hfsplus_delete_cat() by proper initialization of struct
hfsplus_inode_info in the hfsplus_iget() logic.
- A slab-out-of-bounds issue could happen in hfsplus_strcasecmp() if
the length field of struct hfsplus_unistr is bigger than
HFSPLUS_MAX_STRLEN. Fixed by checking the length of comparing
strings, and if the strings' length is bigger than
HFSPLUS_MAX_STRLEN, then the length is corrected to this value.
- The generic/736 xfstest failed for HFS because the HFS volume
becomes corrupted after the test run.
The main reason was the absence of logic that corrects
mdb->drNxtCNID/HFS_SB(sb)->next_id (next unused CNID) after
deleting a record in Catalog File. That was fixed by implementing
the necessary logic in hfs_correct_next_unused_CNID()"
* tag 'hfs-v6.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs:
hfs/hfsplus: rework debug output subsystem
hfsplus: fix slab-out-of-bounds read in hfsplus_strcasecmp()
hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc()
hfs: clear offset and space out of valid records in b-tree node
hfs: add logic of correcting a next unused CNID
hfsplus: fix KMSAN uninit-value issue in hfsplus_delete_cat()
hfs: fix KMSAN uninit-value issue in hfs_find_set_zero_bits()
hfs: make proper initalization of struct hfs_find_data
hfsplus: fix KMSAN uninit-value issue in __hfsplus_ext_cache_extent()
hfs: validate record offset in hfsplus_bmap_alloc
hfsplus: return EIO when type of hidden directory mismatch in hfsplus_fill_super()
MAINTAINERS: update location of hfs&hfsplus trees
|
|
Pull xfs updates from Carlos Maiolino:
"For this merge window, there are really no new features, but there are
a few things worth to emphasize:
- Deprecated for years already, the (no)attr2 and (no)ikeep mount
options have been removed for good
- Several cleanups (specially from typedefs) and bug fixes
- Improvements made in the online repair reap calculations
- online fsck is now enabled by default"
* tag 'xfs-merge-6.18' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (53 commits)
xfs: rework datasync tracking and execution
xfs: rearrange code in xfs_inode_item_precommit
xfs: scrub: use kstrdup_const() for metapath scan setups
xfs: use bt_nr_sectors in xfs_dax_translate_range
xfs: track the number of blocks in each buftarg
xfs: constify xfs_errortag_random_default
xfs: improve default maximum number of open zones
xfs: improve zone statistics message
xfs: centralize error tag definitions
xfs: remove pointless externs in xfs_error.h
xfs: remove the expr argument to XFS_TEST_ERROR
xfs: remove xfs_errortag_set
xfs: remove xfs_errortag_get
xfs: move the XLOG_REG_ constants out of xfs_log_format.h
xfs: adjust the hint based zone allocation policy
xfs: refactor hint based zone allocation
fs: add an enum for number of life time hints
xfs: fix log CRC mismatches between i386 and other architectures
xfs: rename the old_crc variable in xlog_recover_process
xfs: remove the unused xfs_log_iovec_t typedef
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs async directory updates from Christian Brauner:
"This contains further preparatory changes for the asynchronous directory
locking scheme:
- Add lookup_one_positive_killable() which allows overlayfs to
perform lookup that won't block on a fatal signal
- Unify the mount idmap handling in struct renamedata as a rename can
only happen within a single mount
- Introduce kern_path_parent() for audit which sets the path to the
parent and returns a dentry for the target without holding any
locks on return
- Rename kern_path_locked() as it is only used to prepare for the
removal of an object from the filesystem:
kern_path_locked() => start_removing_path()
kern_path_create() => start_creating_path()
user_path_create() => start_creating_user_path()
user_path_locked_at() => start_removing_user_path_at()
done_path_create() => end_creating_path()
NA => end_removing_path()"
* tag 'vfs-6.18-rc1.async' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
debugfs: rename start_creating() to debugfs_start_creating()
VFS: rename kern_path_locked() and related functions.
VFS/audit: introduce kern_path_parent() for audit
VFS: unify old_mnt_idmap and new_mnt_idmap in renamedata
VFS: discard err2 in filename_create()
VFS/ovl: add lookup_one_positive_killable()
|
