| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 11cb63b0d1a0685e0831ae3c77223e002ef18189 upstream.
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/
Reported-by: GangMin Kim <km.kim1503@gmail.com>
Fixes: 3f14b377d01d ("net/sched: act_ct: fix skb leak and crash on ooo frags")
CC: stable@vger.kernel.org
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260225134349.1287037-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 16394d80539937d348dd3b9ea32415c54e67a81b ]
rxq->frag_size is basically a step between consecutive strictly aligned
frames. In ZC mode, chunk size fits exactly, but if chunks are unaligned,
there is no safe way to determine accessible space to grow tailroom.
Report frag_size to be zero, if chunks are unaligned, chunk_size otherwise.
Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-3-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2cedd400c3ec0302ffca2490e8751772906ac23 ]
Whenever an ife action replace changes the metalist, instead of
replacing the old data on the metalist, the current ife code is appending
the new metadata. Aside from being innapropriate behavior, this may lead
to an unbounded addition of metadata to the metalist which might cause an
out of bounds error when running the encode op:
[ 138.423369][ C1] ==================================================================
[ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255
[ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full)
[ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 138.425800][ C1] Call Trace:
[ 138.425804][ C1] <IRQ>
[ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122)
[ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1))
[ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)
[ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1))
[ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2))
[ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171)
[ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57)
[ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)
[ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3))
[ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45)
[ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879)
To solve this issue, fix the replace behavior by adding the metalist to
the ife rcu data structure.
Fixes: aa9fd9a325d51 ("sched: act: ife: update parameters via rcu handling")
Reported-by: Ruitong Liu <cnitlrt@gmail.com>
Tested-by: Ruitong Liu <cnitlrt@gmail.com>
Co-developed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260304140603.76500-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9df95785d3d8302f7c066050117b04cd3c2048c2 ]
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert").
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f083faf59d14c04e01ec05a7507f036c965acf8 ]
When shrinking the number of real tx queues,
netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush
qdiscs for queues which will no longer be used.
qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with
qdisc_lock(). However, for lockless qdiscs, the dequeue path is
serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so
qdisc_reset() can run concurrently with __qdisc_run() and free skbs
while they are still being dequeued, leading to UAF.
This can easily be reproduced on e.g. virtio-net by imposing heavy
traffic while frequently changing the number of queue pairs:
iperf3 -ub0 -c $peer -t 0 &
while :; do
ethtool -L eth0 combined 1
ethtool -L eth0 combined 2
done
With KASAN enabled, this leads to reports like:
BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760
...
Call Trace:
<TASK>
...
__qdisc_run+0x133f/0x1760
__dev_queue_xmit+0x248f/0x3550
ip_finish_output2+0xa42/0x2110
ip_output+0x1a7/0x410
ip_send_skb+0x2e6/0x480
udp_send_skb+0xb0a/0x1590
udp_sendmsg+0x13c9/0x1fc0
...
</TASK>
Allocated by task 1270 on cpu 5 at 44.558414s:
...
alloc_skb_with_frags+0x84/0x7c0
sock_alloc_send_pskb+0x69a/0x830
__ip_append_data+0x1b86/0x48c0
ip_make_skb+0x1e8/0x2b0
udp_sendmsg+0x13a6/0x1fc0
...
Freed by task 1306 on cpu 3 at 44.558445s:
...
kmem_cache_free+0x117/0x5e0
pfifo_fast_reset+0x14d/0x580
qdisc_reset+0x9e/0x5f0
netif_set_real_num_tx_queues+0x303/0x840
virtnet_set_channels+0x1bf/0x260 [virtio_net]
ethnl_set_channels+0x684/0xae0
ethnl_default_set_doit+0x31a/0x890
...
Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by
taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the
serialization model already used by dev_reset_queue().
Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state
reflects an empty queue, avoiding needless re-scheduling.
Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Link: https://patch.msgid.link/20260228145307.3955532-1-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7506ebcd662b868780774d191a7c024c18c557a8 ]
Remove platform data & initialize with defaults
configuration & overwrite based on DT properties.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Message-ID: <20241007090426.811736-1-naresh.solanki@9elements.com>
[groeck: Dropped some unnecessary empty lines]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 170a4b21f49b ("hwmon: (max6639) fix inverted polarity")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ee7fa6cf78ff26d783d39e2949d14c4c1cd5e7f ]
`struct sysctl_fib_multipath_hash_seed` contains two u32 fields
(user_seed and mp_seed), making it an 8-byte structure with a 4-byte
alignment requirement.
In `fib_multipath_hash_from_keys()`, the code evaluates the entire
struct atomically via `READ_ONCE()`:
mp_seed = READ_ONCE(net->ipv4.sysctl_fib_multipath_hash_seed).mp_seed;
While this silently works on GCC by falling back to unaligned regular
loads which the ARM64 kernel tolerates, it causes a fatal kernel panic
when compiled with Clang and LTO enabled.
Commit e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire
when CONFIG_LTO=y") strengthens `READ_ONCE()` to use Load-Acquire
instructions (`ldar` / `ldapr`) to prevent compiler reordering bugs
under Clang LTO. Since the macro evaluates the full 8-byte struct,
Clang emits a 64-bit `ldar` instruction. ARM64 architecture strictly
requires `ldar` to be naturally aligned, thus executing it on a 4-byte
aligned address triggers a strict Alignment Fault (FSC = 0x21).
Fix the read side by moving the `READ_ONCE()` directly to the `u32`
member, which emits a safe 32-bit `ldar Wn`.
Furthermore, Eric Dumazet pointed out that `WRITE_ONCE()` on the entire
struct in `proc_fib_multipath_hash_set_seed()` is also flawed. Analysis
shows that Clang splits this 8-byte write into two separate 32-bit
`str` instructions. While this avoids an alignment fault, it destroys
atomicity and exposes a tear-write vulnerability. Fix this by
explicitly splitting the write into two 32-bit `WRITE_ONCE()`
operations.
Finally, add the missing `READ_ONCE()` when reading `user_seed` in
`proc_fib_multipath_hash_seed()` to ensure proper pairing and
concurrency safety.
Fixes: 4ee2a8cace3f ("net: ipv4: Add a sysctl to set multipath hash seed")
Signed-off-by: Yung Chih Su <yuuchihsu@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260302060247.7066-1-yuuchihsu@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 710f5c76580306cdb9ec51fac8fcf6a8faff7821 ]
We have an increasing number of READ_ONCE(xxx->function)
combined with INDIRECT_CALL_[1234]() helpers.
Unfortunately this forces INDIRECT_CALL_[1234]() to read
xxx->function many times, which is not what we wanted.
Fix these macros so that xxx->function value is not reloaded.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux
add/remove: 0/0 grow/shrink: 1/65 up/down: 122/-1084 (-962)
Function old new delta
ip_push_pending_frames 59 181 +122
ip6_finish_output 687 681 -6
__udp_enqueue_schedule_skb 1078 1072 -6
ioam6_output 2319 2312 -7
xfrm4_rcv_encap_finish2 64 56 -8
xfrm4_output 297 289 -8
vrf_ip_local_out 278 270 -8
vrf_ip6_local_out 278 270 -8
seg6_input_finish 64 56 -8
rpl_output 700 692 -8
ipmr_forward_finish 124 116 -8
ip_forward_finish 143 135 -8
ip6mr_forward2_finish 100 92 -8
ip6_forward_finish 73 65 -8
input_action_end_bpf 1091 1083 -8
dst_input 52 44 -8
__xfrm6_output 801 793 -8
__xfrm4_output 83 75 -8
bpf_input 500 491 -9
__tcp_check_space 530 521 -9
input_action_end_dt6 291 280 -11
vti6_tnl_xmit 1634 1622 -12
bpf_xmit 1203 1191 -12
rpl_input 497 483 -14
rawv6_send_hdrinc 1355 1341 -14
ndisc_send_skb 1030 1016 -14
ipv6_srh_rcv 1377 1363 -14
ip_send_unicast_reply 1253 1239 -14
ip_rcv_finish 226 212 -14
ip6_rcv_finish 300 286 -14
input_action_end_x_core 205 191 -14
input_action_end_x 355 341 -14
input_action_end_t 205 191 -14
input_action_end_dx6_finish 127 113 -14
input_action_end_dx4_finish 373 359 -14
input_action_end_dt4 426 412 -14
input_action_end_core 186 172 -14
input_action_end_b6_encap 292 278 -14
input_action_end_b6 198 184 -14
igmp6_send 1332 1318 -14
ip_sublist_rcv 864 848 -16
ip6_sublist_rcv 1091 1075 -16
ipv6_rpl_srh_rcv 1937 1920 -17
xfrm_policy_queue_process 1246 1228 -18
seg6_output_core 903 885 -18
mld_sendpack 856 836 -20
NF_HOOK 756 736 -20
vti_tunnel_xmit 1447 1426 -21
input_action_end_dx6 664 642 -22
input_action_end 1502 1480 -22
sock_sendmsg_nosec 134 111 -23
ip6mr_forward2 388 364 -24
sock_recvmsg_nosec 134 109 -25
seg6_input_core 836 810 -26
ip_send_skb 172 146 -26
ip_local_out 140 114 -26
ip6_local_out 140 114 -26
__sock_sendmsg 162 136 -26
__ip_queue_xmit 1196 1170 -26
__ip_finish_output 405 379 -26
ipmr_queue_fwd_xmit 373 346 -27
sock_recvmsg 173 145 -28
ip6_xmit 1635 1607 -28
xfrm_output_resume 1418 1389 -29
ip_build_and_send_pkt 625 591 -34
dst_output 504 432 -72
Total: Before=25217686, After=25216724, chg -0.00%
Fixes: 283c16a2dfd3 ("indirect call wrappers: helpers to speed-up indirect calls of builtin")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260227172603.1700433-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 479d589b40b836442bbdadc3fdb37f001bb67f26 ]
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected.
Reported-by: syzbot+5a287bcdc08104bc3132@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6995aff6.050a0220.2eeac1.014e.GAE@google.com/T/
Fixes: 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260226080306.98766-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 60abb0ac11dccd6b98fd9182bc5f85b621688861 ]
After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"),
the list_node field is reused for both the xskb pool list and the buffer
free list, this causes a buffer leak as described below.
xp_free() checks if a buffer is already on the free list using
list_empty(&xskb->list_node). When list_del() is used to remove a node
from the xskb pool list, it doesn't reinitialize the node pointers.
This means list_empty() will return false even after the node has been
removed, causing xp_free() to incorrectly skip adding the buffer to the
free list.
Fix this by using list_del_init() instead of list_del() in all fragment
handling paths, this ensures the list node is reinitialized after removal,
allowing the list_empty() to work correctly.
Fixes: b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260225000456.107806-2-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f7387d6579d6 ("xsk: Fix zero-copy AF_XDP fragment drop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30ec2c1baaead43903ad63ff8e3083949059083c ]
Now that free_list_node's purpose is two-folded, make it just a
'list_node'.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20241007122458.282590-3-maciej.fijalkowski@intel.com
Stable-dep-of: f7387d6579d6 ("xsk: Fix zero-copy AF_XDP fragment drop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b692bf9a7543af7ad11a59d182a3757578f0ba53 ]
Let's bring xdp_buff_xsk back to occupying 2 cachelines by removing
xskb_list_node - for the purpose of gathering the xskb frags
free_list_node can be used, head of the list (xsk_buff_pool::xskb_list)
stays as-is, just reuse the node ptr.
It is safe to do as a single xdp_buff_xsk can never reside in two
pool's lists simultaneously.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20241007122458.282590-2-maciej.fijalkowski@intel.com
Stable-dep-of: f7387d6579d6 ("xsk: Fix zero-copy AF_XDP fragment drop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e39bb9e02b68942f8e9359d2a3efe7d37ae6be0e upstream.
When a process forks, the child process copies the parent's VMAs but the
user_mapped reference count is not incremented. As a result, when both the
parent and child processes exit, tracing_buffers_mmap_close() is called
twice. On the second call, user_mapped is already 0, causing the function to
return -ENODEV and triggering a WARN_ON.
Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set.
But this is only a hint, and the application can call
madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the
application does that, it can trigger this issue on fork.
Fix it by incrementing the user_mapped reference count without re-mapping
the pages in the VMA's open callback.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://patch.msgid.link/20260227025842.1085206-1-wangqing7171@gmail.com
Fixes: cf9f0f7c4c5bb ("tracing: Allow user-space mapping of the ring-buffer")
Reported-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b5dd2030fe08afdf65d
Tested-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 10d1c75ed4382a8e79874379caa2ead8952734f9 ]
Patch series "Address page fault in ima_restore_measurement_list()", v3.
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>" we observe a pafe fault that happens.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) not-present page
This happens on x86_64 only, as this is already fixed in aarch64 in
commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds")
This patch (of 3):
When the second-stage kernel is booted with a limiting command line (e.g.
"mem=<size>"), the IMA measurement buffer handed over from the previous
kernel may fall outside the addressable RAM of the new kernel. Accessing
such a buffer can fault during early restore.
Introduce a small generic helper, ima_validate_range(), which verifies
that a physical [start, end] range for the previous-kernel IMA buffer lies
within addressable memory:
- On x86, use pfn_range_is_mapped().
- On OF based architectures, use page_is_ram().
Link: https://lkml.kernel.org/r/20251231061609.907170-1-harshit.m.mogalapalli@oracle.com
Link: https://lkml.kernel.org/r/20251231061609.907170-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: guoweikang <guoweikang.kernel@gmail.com>
Cc: Henry Willard <henry.willard@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Jonathan McDowell <noodles@fb.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Webb <paul.x.webb@oracle.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Yifei Liu <yifei.l.liu@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f18e502db673c75f762d47101dafcf58f30e2733 ]
The IMA log is currently copied to the new kernel during kexec 'load'
using ima_dump_measurement_list(). However, the log copied at kexec
'load' may result in loss of IMA measurements that only occurred after
kexec "load'. Setup the needed infrastructure to move the IMA log copy
from kexec 'load' to 'execute'.
Define a new IMA hook ima_update_kexec_buffer() as a stub function.
It will be used to call ima_dump_measurement_list() during kexec 'execute'.
Implement ima_kexec_post_load() function to be invoked after the new
Kernel image has been loaded for kexec. ima_kexec_post_load() maps the
IMA buffer to a segment in the newly loaded Kernel. It also registers
the reboot notifier_block to trigger ima_update_kexec_buffer() at
kexec 'execute'.
Set the priority of register_reboot_notifier to INT_MIN to ensure that the
IMA log copy operation will happen at the end of the operation chain, so
that all the IMA measurement records extended into the TPM are copied
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed438 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0091d9241ea24c5275be4a3e5a032862fd9de9ec ]
Implement kimage_map_segment() to enable IMA to map the measurement log
list to the kimage structure during the kexec 'load' stage. This function
gathers the source pages within the specified address range, and maps them
to a contiguous virtual address range.
This is a preparation for later usage.
Implement kimage_unmap_segment() for unmapping segments using vunmap().
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed438 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 128ea9f6ccfb6960293ae4212f4f97165e42222d ]
Currently, if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_wq is a per-CPU worqueue, yet nothing in its name tells about that
CPU affinity constraint, which is very often not required by users. Make it
clear by adding a system_percpu_wq.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Stable-dep-of: 870c2e7cd881 ("Input: synaptics_i2c - guard polling restart in resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba879dfc0574878f3e08f217b2b4fdf845c426c0 ]
Introduce optional fw_node() callback which allows a mailbox controller
driver to provide controller specific mapping using fwnode.
The Linux OF framework already implements fwnode operations for the
Linux DD framework so the fw_xlate() callback works fine with device
tree as well.
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20250818040920.272664-6-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Stable-dep-of: fcd7f96c7836 ("mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db824c1119fc16556a84cb7a771ca6553b3c3a45 ]
Sorting headers alphabetically helps locating duplicates,
and makes it easier to figure out where to insert new headers.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Stable-dep-of: fcd7f96c7836 ("mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ea84089dbf62a92dc7889c79e6b18fc89260808 ]
When a non-NCQ command is issued while NCQ commands are being executed,
ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing
should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command
deferring is correct and as mandated by the ACS specifications since
NCQ and non-NCQ commands cannot be mixed.
However, in the case of a host adapter using multiple submission queues,
when the target device is under a constant load of NCQ commands, there
are no guarantees that requeueing the non-NCQ command will be executed
later and it may be deferred again repeatedly as other submission queues
can constantly issue NCQ commands from different CPUs ahead of the
non-NCQ command. This can lead to very long delays for the execution of
non-NCQ commands, and even complete starvation for these commands in the
worst case scenario.
Since the block layer and the SCSI layer do not distinguish between
queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT
implementation must ensure forward progress for non-NCQ commands in the
presence of NCQ command traffic. This is similar to what SAS HBAs with a
hardware/firmware based SAT implementation do.
Implement such forward progress guarantee by limiting requeueing of
non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is
received and NCQ commands are in-flight, do not force a requeue of the
non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0
to indicate that the command was accepted but hold on to the qc using
the new deferred_qc field of struct ata_port.
This deferred qc will be issued using the work item deferred_qc_work
running the function ata_scsi_deferred_qc_work() once all in-flight
commands complete, which is checked with the port qc_defer() callback
return value indicating that no further delay is necessary. This check
is done using the helper function ata_scsi_schedule_deferred_qc() which
is called from ata_scsi_qc_complete(). This thus excludes this mechanism
from all internal non-NCQ commands issued by ATA EH.
When a port deferred_qc is non NULL, that is, the port has a command
waiting for the device queue to drain, the issuing of all incoming
commands (both NCQ and non-NCQ) is deferred using the regular busy
mechanism. This simplifies the code and also avoids potential denial of
service problems if a user issues too many non-NCQ commands.
Finally, whenever ata EH is scheduled, regardless of the reason, a
deferred qc is always requeued so that it can be retried once EH
completes. This is done by calling the function
ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids
the need for any special processing for the deferred qc in case of NCQ
error, link or device reset, or device timeout.
Reported-by: Xingui Yang <yangxingui@huawei.com>
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Fixes: bdb01301f3ea ("scsi: Add host and host template flag 'host_tagset'")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Tested-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a0f26fcc383965e0522b81269062a9278bc802fe ]
The ATA device flag ATA_DFLAG_ZAC is used to indicate if a devie is a
host managed or host aware zoned device. However, this flag is not used
in the hot path and only used during device scanning/revalidation and
for inquiry and sense SCSI command translation.
Save one bit from struct ata_device flags field by replacing this flag
with the internal helper function ata_dev_is_zac(). This function
returns true if the device class is ATA_DEV_ZAC (host managed ZAC device
case) or if its identify data reports it supports the zoned command set
(host aware ZAC device case).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Stable-dep-of: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9fb6fef0fb49124291837af1da5028f79d53f98e ]
Setting the end address for a resource with a given size lacks a helper and
is therefore coded manually unlike the getter side which has a helper for
resource size calculation. Also, almost all callsites that calculate the
end address for a resource also set the start address right before it like
this:
res->start = start_addr;
res->end = res->start + size - 1;
Add resource_set_range(res, start_addr, size) that sets the start address
and calculates the end address to simplify this often repeated fragment.
Also add resource_set_size() for the cases where setting the start address
of the resource is not necessary but mention in its kerneldoc that
resource_set_range() is preferred when setting both addresses.
Link: https://lore.kernel.org/r/20240614100606.15830-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 11721c45a826 ("PCI: Use resource_set_range() that correctly sets ->end")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 39195990e4c093c9eecf88f29811c6de29265214 ]
fb82437fdd8c ("PCI: Change capability register offsets to hex") incorrectly
converted the PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 value from decimal 52 to hex
0x32:
-#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 0x32 /* end of v2 EPs w/ link */
This broke PCI capabilities in a VMM because subsequent ones weren't
DWORD-aligned.
Change PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 to the correct value of 0x34.
fb82437fdd8c was from Baruch Siach <baruch@tkos.co.il>, but this was not
Baruch's fault; it's a mistake I made when applying the patch.
Fixes: fb82437fdd8c ("PCI: Change capability register offsets to hex")
Reported-by: David Woodhouse <dwmw2@infradead.org>
Closes: https://lore.kernel.org/all/3ae392a0158e9d9ab09a1d42150429dd8ca42791.camel@infradead.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce1dfe6d328966b75821c1f043a940eb2569768a ]
Some endpoint controllers have requirements on the alignment of the
controller physical memory address that must be used to map a RC PCI
address region. For instance, the endpoint controller of the RK3399 SoC
uses at most the lower 20 bits of a physical memory address region as
the lower bits of a RC PCI address region. For mapping a PCI address
region of size bytes starting from pci_addr, the exact number of
address bits used is the number of address bits changing in the address
range [pci_addr..pci_addr + size - 1]. For this example, this creates
the following constraints:
1) The offset into the controller physical memory allocated for a
mapping depends on the mapping size *and* the starting PCI address
for the mapping.
2) A mapping size cannot exceed the controller windows size (1MB) minus
the offset needed into the allocated physical memory, which can end
up being a smaller size than the desired mapping size.
Handling these constraints independently of the controller being used
in an endpoint function driver is not possible with the current EPC
API as only the ->align field in struct pci_epc_features is provided
but used for BAR (inbound ATU mappings) mapping only. A new API is
needed for function drivers to discover mapping constraints and handle
non-static requirements based on the RC PCI address range to access.
Introduce the endpoint controller operation ->align_addr() to allow
the EPC core functions to obtain the size and the offset into a
controller address region that must be allocated and mapped to access
a RC PCI address region. The size of the mapping provided by the
align_addr() operation can then be used as the size argument for the
function pci_epc_mem_alloc_addr() and the offset into the allocated
controller memory provided can be used to correctly handle data
transfers. For endpoint controllers that have PCI address alignment
constraints, the align_addr() operation may indicate upon return an
effective PCI address mapping size that is smaller (but not 0) than the
requested PCI address region size.
The controller ->align_addr() operation is optional: controllers that
do not have any alignment constraints for mapping RC PCI address regions
do not need to implement this operation. For such controllers, it is
always assumed that the mapping size is equal to the requested size of
the PCI region and that the mapping offset is 0.
The function pci_epc_mem_map() is introduced to use this new controller
operation (if it is defined) to handle controller memory allocation and
mapping to a RC PCI address region in endpoint function drivers.
This function first uses the ->align_addr() controller operation to
determine the controller memory address size (and offset into) needed
for mapping an RC PCI address region. The result of this operation is
used to allocate a controller physical memory region using
pci_epc_mem_alloc_addr() and then to map that memory to the RC PCI
address space with pci_epc_map_addr().
Since ->align_addr() () may indicate that not all of a RC PCI address
region can be mapped, pci_epc_mem_map() may only partially map the RC
PCI address region specified. It is the responsibility of the caller
(an endpoint function driver) to handle such smaller mapping by
repeatedly using pci_epc_mem_map() over the desried PCI address range.
The counterpart of pci_epc_mem_map() to unmap and free a mapped
controller memory address region is pci_epc_mem_unmap().
Both functions operate using the new struct pci_epc_map data structure.
This new structure represents a mapping PCI address, mapping effective
size, the size of the controller memory needed for the mapping as well
as the physical and virtual CPU addresses of the mapping (phys_base and
virt_base fields). For convenience, the physical and virtual CPU
addresses within that mapping to use to access the target RC PCI address
region are also provided (phys_addr and virt_addr fields).
Endpoint function drivers can use struct pci_epc_map to access the
mapped RC PCI address region using the ->virt_addr and ->pci_size
fields.
Co-developed-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241012113246.95634-4-dlemoal@kernel.org
[mani: squashed the patch that changed phy_addr_t to u64]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: c22533c66cca ("PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9678e53179aa7e907360f5b5b275769008a69b80 ]
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbed6 ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4ff9f646a4d373f9e895c2f0073305da288bc0a ]
The function graph tracer was modified to us the ftrace_ops of the
function tracer. This simplified the code as well as allowed more features
of the function graph tracer.
Not all architectures were converted over as it required the
implementation of HAVE_DYNAMIC_FTRACE_WITH_ARGS to implement. For those
architectures, it still did it the old way where the function graph tracer
handle was called by the function tracer trampoline. The handler then had
to check the hash to see if the registered handlers wanted to be called by
that function or not.
In order to speed up the function graph tracer that used ftrace_ops, if
only one callback was registered with function graph, it would call its
function directly via a static call.
Now, if the architecture does not support the use of using ftrace_ops and
still has the ftrace function trampoline calling the function graph
handler, then by doing a direct call it removes the check against the
handler's hash (list of functions it wants callbacks to), and it may call
that handler for functions that the handler did not request calls for.
On 32bit x86, which does not support the ftrace_ops use with function
graph tracer, it shows the issue:
~# trace-cmd start -p function -l schedule
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) * 11898.94 us | schedule();
3) # 1783.041 us | schedule();
1) | schedule() {
------------------------------------------
1) bash-8369 => kworker-7669
------------------------------------------
1) | schedule() {
------------------------------------------
1) kworker-7669 => bash-8369
------------------------------------------
1) + 97.004 us | }
1) | schedule() {
[..]
Now by starting the function tracer is another instance:
~# trace-cmd start -B foo -p function
This causes the function graph tracer to trace all functions (because the
function trace calls the function graph tracer for each on, and the
function graph trace is doing a direct call):
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) 1.669 us | } /* preempt_count_sub */
1) + 10.443 us | } /* _raw_spin_unlock_irqrestore */
1) | tick_program_event() {
1) | clockevents_program_event() {
1) 1.044 us | ktime_get();
1) 6.481 us | lapic_next_event();
1) + 10.114 us | }
1) + 11.790 us | }
1) ! 181.223 us | } /* hrtimer_interrupt */
1) ! 184.624 us | } /* __sysvec_apic_timer_interrupt */
1) | irq_exit_rcu() {
1) 0.678 us | preempt_count_sub();
When it should still only be tracing the schedule() function.
To fix this, add a macro FGRAPH_NO_DIRECT to be set to 0 when the
architecture does not support function graph use of ftrace_ops, and set to
1 otherwise. Then use this macro to know to allow function graph tracer to
call the handlers directly or not.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260218104244.5f14dade@gandalf.local.home
Fixes: cc60ee813b503 ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6db8b56eed62baacaf37486e83378a72635c04cc ]
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00).
Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Cc: stable@vger.kernel.org
Signed-off-by: Junxi Qian <qjx1298677004@gmail.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260211040412.86195-1-qjx1298677004@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9dc052234da736f7749f19ab6936342ec7dbe3ac ]
Enabling KCSAN is causing a large number of duplicate types in BTF for
core kernel structs like task_struct [1]. This is due to the definition
in include/linux/compiler_types.h
`#ifdef __SANITIZE_THREAD__
...
`#define __data_racy volatile
..
`#else
...
`#define __data_racy
...
`#endif
Because some objects in the kernel are compiled without KCSAN flags
(KCSAN_SANITIZE) we sometimes get the empty __data_racy annotation for
objects; as a result we get multiple conflicting representations of the
associated structs in DWARF, and these lead to multiple instances of core
kernel types in BTF since they cannot be deduplicated due to the
additional modifier in some instances.
Moving the __data_racy definition under CONFIG_KCSAN avoids this problem,
since the volatile modifier will be present for both KCSAN and
KCSAN_SANITIZE objects in a CONFIG_KCSAN=y kernel.
Link: https://lkml.kernel.org/r/20260116091730.324322-1-alan.maguire@oracle.com
Fixes: 31f605a308e6 ("kcsan, compiler_types: Introduce __data_racy type qualifier")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Bart van Assche <bvanassche@acm.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Naman Jain <namjain@linux.microsoft.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4b4385d0523e39a7c058cb5a6c8269e513126ca ]
drm_of_panel_bridge_remove() uses of_graph_get_remote_node() to get a
device_node but does not put the node reference.
Fixes: c70087e8f16f ("drm/drm_of: add drm_of_panel_bridge_remove function")
Cc: stable@vger.kernel.org # v4.15
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-1-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c28d2bff70444a85b3b86aaf241ece9408c7858c ]
Test L2CAP/ECFC/BV-26-C expect the response to L2CAP_ECRED_CONN_REQ with
and MTU value < L2CAP_ECRED_MIN_MTU (64) to be L2CAP_CR_LE_INVALID_PARAMS
rather than L2CAP_CR_LE_UNACCEPT_PARAMS.
Also fix not including the correct number of CIDs in the response since
the spec requires all CIDs being rejected to be included in the
response.
Link: https://github.com/bluez/bluez/issues/1868
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7accb1c4321acb617faf934af59d928b0b047e2b ]
This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 64
MPS: 64
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reserved (0x000c)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
MTU: 264
MPS: 99
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 65
MPS: 64
! Source CID: 85
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 672
! MPS: 63
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Result: Reconfiguration failed - other unacceptable parameters (0x0004)
Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
MTU: 84
! MPS: 71
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Link: https://github.com/bluez/bluez/issues/1865
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4edd4ba71ce0df015303dba75ea9d20d1a217546 ]
Musl defines its own struct ethhdr and thus defines __UAPI_DEF_ETHHDR to
zero. To avoid struct redefinition errors, user space is therefore
supposed to include netinet/if_ether.h before (or instead of)
linux/if_ether.h. To relieve them from this burden, include the libc
header here if not building for kernel space.
Reported-by: Alyssa Ross <hi@alyssa.is>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e4faaf65a75f650ac4366ddff5dabb826029ca5a ]
idev->mr_maxdelay is read and written locklessly,
add READ_ONCE()/WRITE_ONCE() annotations.
While we are at it, make this field an u32.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260122172247.2429403-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03e9d91dd64e2f5ea632df5d59568d91757efc4d ]
Add missing READ_ONCE() when reading sysctl values.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b190870e0e0cfb375c0d4da02761c32083f3644d ]
Add Nova Lake (NVL) audio Device ID
The ID will be used by HDA legacy, SOF audio stack and the driver
to determine which audio stack should be used (intel-dsp-config).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260120193507.14019-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c25d01e1c4f2d43f47af87c00e223f5ca7c71792 ]
The unpacked unions within a packed struct generates alignment warnings
on clang for 32-bit ARM:
./usr/include/linux/vbox_vmmdev_types.h:239:4: error: field u within 'struct vmmdev_hgcm_function_parameter32'
is less aligned than 'union (unnamed union at ./usr/include/linux/vbox_vmmdev_types.h:223:2)'
and is usually due to 'struct vmmdev_hgcm_function_parameter32' being packed,
which can lead to unaligned accesses [-Werror,-Wunaligned-access]
239 | } u;
| ^
./usr/include/linux/vbox_vmmdev_types.h:254:6: error: field u within
'struct vmmdev_hgcm_function_parameter64::(anonymous union)::(unnamed at ./usr/include/linux/vbox_vmmdev_types.h:249:3)'
is less aligned than 'union (unnamed union at ./usr/include/linux/vbox_vmmdev_types.h:251:4)' and is usually due to
'struct vmmdev_hgcm_function_parameter64::(anonymous union)::(unnamed at ./usr/include/linux/vbox_vmmdev_types.h:249:3)'
being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
With the recent changes to compile-test the UAPI headers in more cases,
these warning in combination with CONFIG_WERROR breaks the build.
Fix the warnings.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512140314.DzDxpIVn-lkp@intel.com/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/linux-kbuild/20260110-uapi-test-disable-headers-arm-clang-unaligned-access-v1-1-b7b0fa541daa@kernel.org/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-kbuild/29b2e736-d462-45b7-a0a9-85f8d8a3de56@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Tested-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260115-kbuild-alignment-vbox-v1-2-076aed1623ff@linutronix.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e5271393d777f6159d896943b4c44c4f3ecff52 ]
The unpacked union within a packed struct generates alignment warnings
on clang for 32-bit ARM:
./usr/include/linux/hyperv.h:361:2: error: field within 'struct hv_kvp_exchg_msg_value'
is less aligned than 'union hv_kvp_exchg_msg_value::(anonymous at ./usr/include/linux/hyperv.h:361:2)'
and is usually due to 'struct hv_kvp_exchg_msg_value' being packed,
which can lead to unaligned accesses [-Werror,-Wunaligned-access]
361 | union {
| ^
With the recent changes to compile-test the UAPI headers in more cases,
this warning in combination with CONFIG_WERROR breaks the build.
Fix the warning.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512140314.DzDxpIVn-lkp@intel.com/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/linux-kbuild/20260110-uapi-test-disable-headers-arm-clang-unaligned-access-v1-1-b7b0fa541daa@kernel.org/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-kbuild/29b2e736-d462-45b7-a0a9-85f8d8a3de56@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Wei Liu (Microsoft) <wei.liu@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260115-kbuild-alignment-vbox-v1-1-076aed1623ff@linutronix.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4e620eccbef76aa5564ebb295e23d6540e27215 ]
Currently the buffers are being filled until full, which works fine
for the transport stream, but not when reading sections, those have
to be returned to userspace immediately, otherwise dvbv5-scan will
just wait forever.
Add a 'flush' argument to dvb_vb2_fill_buffer to indicate whether
the buffer must be flushed or wait until it is full.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eae21beecb95a3b69ee5c38a659f774e171d730e ]
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the buffer
if ERR_INFO_NUM is too big, making it report instead:
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: ARM processor error
[Hardware Error]: MIDR: 0xff304b2f8476870a
[Hardware Error]: section length: 854918320, CPER size: 67
[Hardware Error]: section length is too big
[Hardware Error]: firmware-generated error record is incorrect
[Hardware Error]: ERR_INFO_NUM is 46198
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/41cd9f6b3ace3cdff7a5e864890849e4b1c58b63.1767871950.git.mchehab+huawei@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa2408a24f8f0db14d9cfc613ef162dc267d7ad4 ]
The logic at ghes_new() prevents allocating too large records, by
checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB).
Yet, the allocation is done with the actual number of pages from the
CPER bios table location, which can be smaller.
Yet, a bad firmware could send data with a different size, which might
be bigger than the allocated memory, causing an OOPS:
Unable to handle kernel paging request at virtual address fff00000f9b40000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000
[fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000
Internal error: Oops: 0000000096000007 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022
Workqueue: kacpi_notify acpi_os_execute_deferred
pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : hex_dump_to_buffer+0x30c/0x4a0
lr : hex_dump_to_buffer+0x328/0x4a0
sp : ffff800080e13880
x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083
x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004
x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083
x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010
x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020
x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008
x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020
x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000
x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008
Call trace:
hex_dump_to_buffer+0x30c/0x4a0 (P)
print_hex_dump+0xac/0x170
cper_estatus_print_section+0x90c/0x968
cper_estatus_print+0xf0/0x158
__ghes_print_estatus+0xa0/0x148
ghes_proc+0x1bc/0x220
ghes_notify_hed+0x5c/0xb8
notifier_call_chain+0x78/0x148
blocking_notifier_call_chain+0x4c/0x80
acpi_hed_notify+0x28/0x40
acpi_ev_notify_dispatch+0x50/0x80
acpi_os_execute_deferred+0x24/0x48
process_one_work+0x15c/0x3b0
worker_thread+0x2d0/0x400
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44)
---[ end trace 0000000000000000 ]---
Prevent that by taking the actual allocated are into account when
checking for CPER length.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject tweaks ]
Link: https://patch.msgid.link/4e70310a816577fabf37d94ed36cde4ad62b1e0a.1767871950.git.mchehab+huawei@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bcb90a2834c7393c26df9609b889a3097b7700cd ]
The "at" variant of getxattr() and listxattr() are missing from the
audit read class. Calling getxattrat() or listxattrat() on a file to
read its extended attributes will bypass audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds missing syscalls to the audit read class.
Signed-off-by: Jeffrey Bencteux <jeff@bencteux.fr>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f493a6079b588cf1f04ce5ed6cdad45ab0d53dc ]
fchmodat2(), introduced in version 6.6 is currently not in the change
attribute class of audit. Calling fchmodat2() to change a file
attribute in the same fashion than chmod() or fchmodat() will bypass
audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds fchmodat2() to the change attributes class.
Signed-off-by: Jeffrey Bencteux <jeff@bencteux.fr>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 47bf2e813817159f4d195be83a9b5a640ee6baec ]
Driver is using num_vhca_ports capability to distinguish between
multiport master device and multiport slave device. num_vhca_ports is a
capability the driver sets according to the MAX num_vhca_ports
capability reported by FW. On the other hand, light SFs doesn't set the
above capbility.
This leads to wrong results whenever light SFs is checking whether he is
a multiport master or slave.
Therefore, use the MAX capability to distinguish between master and
slave devices.
Fixes: e71383fb9cd1 ("net/mlx5: Light probe local SFs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 87b08913a9ae82082e276d237ece08fc8ee24380 ]
icmp_global_credit was meant to be changed ~1000 times per second,
but if an admin sets net.ipv4.icmp_msgs_per_sec to a very high value,
icmp_global_credit changes can inflict false sharing to surrounding
fields that are read mostly.
Move icmp_global_credit and icmp_global_stamp to a separate
cacheline aligned group.
Fixes: b056b4cd9178 ("icmp: move icmp_global.credit and icmp_global.stamp to per netns storage")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260216142832.3834174-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 452a3eee22c57a5786ae6db5c97f3b0ec13bb3b7 ]
It is unlikely that this function will be ever called
with isk->inet_num being not zero.
Perform the check on isk->inet_num inside the locked section
for complete safety.
Fixes: 9b115749acb24 ("ipv6: add ip6_sock_set_v6only")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260216102202.3343588-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f47c1b77d0a2a9c0d49ec14302e74f933398d1a3 ]
The clk_save_context() and clk_restore_context() helpers are only
implemented by the Common Clock Framework. They are not available when
using legacy clock frameworks. Dummy implementations are provided, but
only if no clock support is available at all.
Hence when CONFIG_HAVE_CLK=y, but CONFIG_COMMON_CLK is not enabled:
m68k-linux-gnu-ld: drivers/net/phy/air_en8811h.o: in function `en8811h_resume':
air_en8811h.c:(.text+0x83e): undefined reference to `clk_restore_context'
m68k-linux-gnu-ld: drivers/net/phy/air_en8811h.o: in function `en8811h_suspend':
air_en8811h.c:(.text+0x856): undefined reference to `clk_save_context'
Fix this by moving forward declarations and dummy implementions from the
HAVE_CLK to the COMMON_CLK section.
Fixes: 8b95d1ce3300c411 ("clk: Add functions to save/restore clock context en-masse")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511301553.eaEz1nEW-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bbb8d98fb4536594cb104fd630ea0f7dce3771d6 ]
The added print statement from a recent fix causes the driver to fail
building when CONFIG_PM is disabled:
drivers/ufs/host/ufs-mediatek.c: In function 'ufs_mtk_resume':
drivers/ufs/host/ufs-mediatek.c:1890:40: error: 'struct dev_pm_info' has no member named 'request'
1890 | hba->dev->power.request,
It seems unlikely that the driver can work at all without CONFIG_PM, so
just add a dependency and remove the existing ifdef checks, rather than
adding another ifdef.
Fixes: 15ef3f5aa822 ("scsi: ufs: host: mediatek: Enhance recovery on resume failure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260202095052.1232703-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a57b1f07d2d35843a7ada30c8cf9a215c0931868 ]
The @data buffer is 5 bytes, not 4, it has been extended for the need of
devices with an extra ID bytes.
Fixes: 34a956739d29 ("mtd: spinand: Add support for 5-byte IDs")
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afcae7d7b8a278a6c29e064f99e5bafd4ac1fb37 ]
svc_rdma_accept() computes sc_sq_depth as the sum of rq_depth and the
number of rdma_rw contexts (ctxts). This value is used to allocate the
Send CQ and to initialize the sc_sq_avail credit pool.
However, when the device uses memory registration for RDMA operations,
rdma_rw_init_qp() inflates the QP's max_send_wr by a factor of three
per context to account for REG and INV work requests. The Send CQ and
credit pool remain sized for only one work request per context,
causing Send Queue exhaustion under heavy NFS WRITE workloads.
Introduce rdma_rw_max_sge() to compute the actual number of Send Queue
entries required for a given number of rdma_rw contexts. Upper layer
protocols call this helper before creating a Queue Pair so that their
Send CQs and credit accounting match the QP's true capacity.
Update svc_rdma_accept() to use rdma_rw_max_sge() when computing
sc_sq_depth, ensuring the credit pool reflects the work requests
that rdma_rw_init_qp() will reserve.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 00bd1439f464 ("RDMA/rw: Support threshold for registration vs scattering to local pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-5-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b85137caf110a09a4a18f00f730de4709f9afc8 ]
The hibernate resume sequence involves loading a resume kernel that is just
used for loading the hibernate image before shifting back to the existing
kernel.
During that hibernate resume sequence the resume kernel may have loaded
the ccp driver. If this happens the resume kernel will also have called
PSP_CMD_TEE_RING_INIT but it will never have called
PSP_CMD_TEE_RING_DESTROY.
This is problematic because the existing kernel needs to re-initialize the
ring. One could argue that the existing kernel should call destroy
as part of restore() but there is no guarantee that the resume kernel did
or didn't load the ccp driver. There is also no callback opportunity for
the resume kernel to destroy before handing back control to the existing
kernel.
Similar problems could potentially exist with the use of kdump and
crash handling. I actually reproduced this issue like this:
1) rmmod ccp
2) hibernate the system
3) resume the system
4) modprobe ccp
The resume kernel will have loaded ccp but never destroyed and then when
I try to modprobe it fails.
Because of these possible cases add a flow that checks the error code from
the PSP_CMD_TEE_RING_INIT call and tries to call PSP_CMD_TEE_RING_DESTROY
if it failed. If this succeeds then call PSP_CMD_TEE_RING_INIT again.
Fixes: f892a21f51162 ("crypto: ccp - use generic power management")
Reported-by: Lars Francke <lars.francke@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/CAD-Ua_gfJnQSo8ucS_7ZwzuhoBRJ14zXP7s8b-zX3ZcxcyWePw@mail.gmail.com/
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260116041132.153674-6-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
