| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The integrated PHY in 2.5Gbps chip RTL8125 is the first (known to me)
PHY that uses standard Clause 22 for all modes up to 1Gbps and adds
2.5Gbps control using vendor-specific registers. To use phylib for
the standard part little extensions are needed:
- Move most of genphy_config_aneg to a new function
__genphy_config_aneg that takes a parameter whether restarting
auto-negotiation is needed (depending on whether content of
vendor-specific advertisement register changed).
- Don't clear phydev->lp_advertising in genphy_read_status so that
we can set non-C22 mode flags before.
Basically both changes mimic the behavior of the equivalent Clause 45
functions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previous patch made the length of the per-CPU skb drop list
configurable. Expose a counter that shows how many packets could not be
enqueued to this list.
This allows users determine the desired queue length.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In packet alert mode, each CPU holds a list of dropped skbs that need to
be processed in process context and sent to user space. To avoid
exhausting the system's memory the maximum length of this queue is
currently set to 1000.
Allow users to tune the length of this queue according to their needs.
The configured length is reported to user space when drop monitor
configuration is queried.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Users should be able to query the current configuration of drop monitor
before they start using it. Add a command to query the existing
configuration which currently consists of alert mode and packet
truncation length.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When sending dropped packets to user space it is not always necessary to
copy the entire packet as usually only the headers are of interest.
Allow user to specify the truncation length and add the original length
of the packet as additional metadata to the netlink message.
By default no truncation is performed.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So far drop monitor supported only one alert mode in which a summary of
locations in which packets were recently dropped was sent to user space.
This alert mode is sufficient in order to understand that packets were
dropped, but lacks information to perform a more detailed analysis.
Add a new alert mode in which the dropped packet itself is passed to
user space along with metadata: The drop location (as program counter
and resolved symbol), ingress netdevice and drop timestamp. More
metadata can be added in the future.
To avoid performing expensive operations in the context in which
kfree_skb() is invoked (can be hard IRQ), the dropped skb is cloned and
queued on per-CPU skb drop list. Then, in process context the netlink
message is allocated, prepared and finally sent to user space.
The per-CPU skb drop list is limited to 1000 skbs to prevent exhausting
the system's memory. Subsequent patches will make this limit
configurable and also add a counter that indicates how many skbs were
tail dropped.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The next patch is going to add another alert mode in which the dropped
packet is notified to user space, instead of only a summary of recent
drops.
Abstract the differences between the modes by adding alert mode
operations. The operations are selected based on the currently
configured mode and associated with the probes and the work item just
before tracing starts.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
This cleans up a lot of unneeded code and logic around the debugfs
files, making all of this much simpler and easier to understand as we
don't need to keep the dentries saved anymore.
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
This cleans up a lot of unneeded code and logic around the debugfs wimax
files, making all of this much simpler and easier to understand.
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: linux-wimax@intel.com
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently mlx5_eswitch_rep stores same hw ID for all representors.
However it is never used from this structure.
It is always used from mlx5_vport.
Hence, remove unused field.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
To remove dependency on rtnl lock, protect mod_hdr hash table from
concurrent modifications with new mutex.
Implement helper function to get flow namespace to prevent code
duplication.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
List of flows attached to mod header entry is used as implicit reference
counter (mod header entry is deallocated when list becomes free) and as a
mechanism to obtain mod header entry that flow is attached to (through list
head). This is not safe when concurrent modification of list of flows
attached to mod header entry is possible. Proper atomic reference counter
is required to support concurrent access.
As a preparation for extending mod header with reference counting, extract
code that lookups and deletes mod header entry into standalone put/get
helpers. In order to remove this dependency on external locking, extend mod
header entry with reference counter to manage its lifetime and extend flow
structure with direct pointer to mod header entry that flow is attached to.
To remove code duplication between legacy and switchdev mode
implementations that both support mod_hdr functionality, store mod_hdr
table in dedicated structure used by both fdb and kernel namespaces. New
table structure is extended with table lock by one of the following patches
in this series. Implement helper function to get correct mod_hdr table
depending on flow namespace.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
TCP_BASE_MSS is used as the default initial MSS value when MTU probing is
enabled. Update the comment to reflect this.
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current implementation of TCP MTU probing can considerably
underestimate the MTU on lossy connections allowing the MSS to get down to
48. We have found that in almost all of these cases on our networks these
paths can handle much larger MTUs meaning the connections are being
artificially limited. Even though TCP MTU probing can raise the MSS back up
we have seen this not to be the case causing connections to be "stuck" with
an MSS of 48 when heavy loss is present.
Prior to pushing out this change we could not keep TCP MTU probing enabled
b/c of the above reasons. Now with a reasonble floor set we've had it
enabled for the past 6 months.
The new sysctl will still default to TCP_MIN_SND_MSS (48), but gives
administrators the ability to control the floor of MSS probing.
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The size of the snapshot has to be the same as the size of the region,
therefore no need to pass it again during snapshot creation. Remove the
arg and use region->size instead.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement the RSS functionality and add the corresponding callbacks in
XGMAC core.
Changes from v1:
- Do not use magic constants (Jakub)
- Use ethtool_rxfh_indir_default() (Jakub)
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nftable support indr-block call. It makes nftable an offload vlan
and tunnel device.
nft add table netdev firewall
nft add chain netdev firewall aclout { type filter hook ingress offload device mlx_pf0vf0 priority - 300 \; }
nft add rule netdev firewall aclout ip daddr 10.0.0.1 fwd to vlan0
nft add chain netdev firewall aclin { type filter hook ingress device vlan0 priority - 300 \; }
nft add rule netdev firewall aclin ip daddr 10.0.0.7 fwd to mlx_pf0vf0
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It provide a callback list to find the blocks of tc
and nft subsystems
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
move tc indirect block to flow_offload and rename
it to flow indirect block.The nf_tables can use the
indr block architecture.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When GRO decides not to coalesce a packet, in napi_frags_finish(), instead
of passing it to the stack immediately, place it on a list in the napi
struct. Then, at flush time (napi_complete_done(), napi_poll(), or
napi_busy_loop()), call netif_receive_skb_list_internal() on the list.
We'd like to do that in napi_gro_flush(), but it's not called if
!napi->gro_bitmask, so we have to do it in the callers instead. (There are
a handful of drivers that call napi_gro_flush() themselves, but it's not
clear why, or whether this will affect them.)
Because a full 64 packets is an inefficiently large batch, also consume the
list whenever it exceeds gro_normal_batch, a new net/core sysctl that
defaults to 8.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Supported ports in ethtool <eth1> are displayed based on media type.
For media type fibre and twinaxial, port type is "FIBRE". Media type
Base-T is "TP" and media KR is "Backplane".
V1->V2:
Corrected the subject.
Signed-off-by: Rahul Verma <rahulv@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just minor overlapping changes in the conflicts here.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
"Yeah I should have sent a pull request last week, so there is a lot
more here than usual:
1) Fix memory leak in ebtables compat code, from Wenwen Wang.
2) Several kTLS bug fixes from Jakub Kicinski (circular close on
disconnect etc.)
3) Force slave speed check on link state recovery in bonding 802.3ad
mode, from Thomas Falcon.
4) Clear RX descriptor bits before assigning buffers to them in
stmmac, from Jose Abreu.
5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
loops, from Nishka Dasgupta.
6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
7) Need to hold sock across skb->destructor invocation, from Cong
Wang.
8) IP header length needs to be validated in ipip tunnel xmit, from
Haishuang Yan.
9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
Heiner Kallweit.
11) Upon bridge device init failure, we need to delete the local fdb.
From Nikolay Aleksandrov.
12) Handle erros from of_get_mac_address() properly in stmmac, from
Martin Blumenstingl.
13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
Kadlecsik.
14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
some devices, so revert. From Johannes Berg.
15) Fix deadlock in rxrpc, from David Howells.
16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
Haibing.
17) Fix mvpp2 crash on module removal, from Matteo Croce.
18) Fix race in genphy_update_link, from Heiner Kallweit.
19) bpf_xdp_adjust_head() stopped working with generic XDP when we
fixes generic XDP to support stacked devices properly, fix from
Jesper Dangaard Brouer.
20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
David Ahern.
21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
net: dsa: sja1105: Fix memory leak on meta state machine error path
net: dsa: sja1105: Fix memory leak on meta state machine normal path
net: dsa: sja1105: Really fix panic on unregistering PTP clock
net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
net: sched: sample: allow accessing psample_group with rtnl
net: sched: police: allow accessing police->params with rtnl
net: hisilicon: Fix dma_map_single failed on arm64
net: hisilicon: fix hip04-xmit never return TX_BUSY
net: hisilicon: make hip04_tx_reclaim non-reentrant
tc-testing: updated vlan action tests with batch create/delete
net sched: update vlan action for batched events operations
net: stmmac: tc: Do not return a fragment entry
net: stmmac: Fix issues when number of Queues >= 4
net: stmmac: xgmac: Fix XGMAC selftests
be2net: disable bh with spin_lock in be_process_mcc
net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
...
|
|
TC mirred actions (redirect and mirred) can send to egress or ingress of a
device. Currently only egress is used for hw offload rules.
Modify the intermediate representation for hw offload to include mirred
actions that go to ingress. This gives drivers access to such rules and
can decide whether or not to offload them.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TC mirred actions can send to egress or ingress on a given netdev. Helpers
exist to detect actions that are mirred to egress. Extend the header file
to include helpers to detect ingress mirred actions.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TC rules can impliment skbedit actions. Currently actions that modify the
skb mark are passed to offloading drivers via the hardware intermediate
representation in the flow_offload API.
Extend this to include skbedit actions that modify the packet type of the
skb. Such actions may be used to set the ptype to HOST when redirecting a
packet to ingress.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The tc_act header file contains an inline function that checks if an
action is changing the skb mark of a packet and a further function to
extract the mark.
Add similar functions to check for and get skbedit actions that modify
the packet type of the skb.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently implemented support for sample action in flow_offload infra leads
to following rcu usage warning:
[ 1938.234856] =============================
[ 1938.234858] WARNING: suspicious RCU usage
[ 1938.234863] 5.3.0-rc1+ #574 Not tainted
[ 1938.234866] -----------------------------
[ 1938.234869] include/net/tc_act/tc_sample.h:47 suspicious rcu_dereference_check() usage!
[ 1938.234872]
other info that might help us debug this:
[ 1938.234875]
rcu_scheduler_active = 2, debug_locks = 1
[ 1938.234879] 1 lock held by tc/19540:
[ 1938.234881] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970
[ 1938.234900]
stack backtrace:
[ 1938.234905] CPU: 2 PID: 19540 Comm: tc Not tainted 5.3.0-rc1+ #574
[ 1938.234908] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 1938.234911] Call Trace:
[ 1938.234922] dump_stack+0x85/0xc0
[ 1938.234930] tc_setup_flow_action+0xed5/0x2040
[ 1938.234944] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower]
[ 1938.234965] fl_change+0xd24/0x1b30 [cls_flower]
[ 1938.234990] tc_new_tfilter+0x3e0/0x970
[ 1938.235021] ? tc_del_tfilter+0x720/0x720
[ 1938.235028] rtnetlink_rcv_msg+0x389/0x4b0
[ 1938.235038] ? netlink_deliver_tap+0x95/0x400
[ 1938.235044] ? rtnl_dellink+0x2d0/0x2d0
[ 1938.235053] netlink_rcv_skb+0x49/0x110
[ 1938.235063] netlink_unicast+0x171/0x200
[ 1938.235073] netlink_sendmsg+0x224/0x3f0
[ 1938.235091] sock_sendmsg+0x5e/0x60
[ 1938.235097] ___sys_sendmsg+0x2ae/0x330
[ 1938.235111] ? __handle_mm_fault+0x12cd/0x19e0
[ 1938.235125] ? __handle_mm_fault+0x12cd/0x19e0
[ 1938.235138] ? find_held_lock+0x2b/0x80
[ 1938.235147] ? do_user_addr_fault+0x22d/0x490
[ 1938.235160] __sys_sendmsg+0x59/0xa0
[ 1938.235178] do_syscall_64+0x5c/0xb0
[ 1938.235187] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1938.235192] RIP: 0033:0x7ff9a4d597b8
[ 1938.235197] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83
ec 28 89 54
[ 1938.235200] RSP: 002b:00007ffcfe381c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1938.235205] RAX: ffffffffffffffda RBX: 000000005d4497f9 RCX: 00007ff9a4d597b8
[ 1938.235208] RDX: 0000000000000000 RSI: 00007ffcfe381cb0 RDI: 0000000000000003
[ 1938.235211] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006
[ 1938.235214] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001
[ 1938.235217] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001
Change tcf_sample_psample_group() helper to allow using it from both rtnl
and rcu protected contexts.
Fixes: a7a7be6087b0 ("net/sched: add sample action to the hardware intermediate representation")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently implemented support for police action in flow_offload infra leads
to following rcu usage warning:
[ 1925.881092] =============================
[ 1925.881094] WARNING: suspicious RCU usage
[ 1925.881098] 5.3.0-rc1+ #574 Not tainted
[ 1925.881100] -----------------------------
[ 1925.881104] include/net/tc_act/tc_police.h:57 suspicious rcu_dereference_check() usage!
[ 1925.881106]
other info that might help us debug this:
[ 1925.881109]
rcu_scheduler_active = 2, debug_locks = 1
[ 1925.881112] 1 lock held by tc/18591:
[ 1925.881115] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970
[ 1925.881124]
stack backtrace:
[ 1925.881127] CPU: 2 PID: 18591 Comm: tc Not tainted 5.3.0-rc1+ #574
[ 1925.881130] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 1925.881132] Call Trace:
[ 1925.881138] dump_stack+0x85/0xc0
[ 1925.881145] tc_setup_flow_action+0x1771/0x2040
[ 1925.881155] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower]
[ 1925.881175] fl_change+0xd24/0x1b30 [cls_flower]
[ 1925.881200] tc_new_tfilter+0x3e0/0x970
[ 1925.881231] ? tc_del_tfilter+0x720/0x720
[ 1925.881243] rtnetlink_rcv_msg+0x389/0x4b0
[ 1925.881250] ? netlink_deliver_tap+0x95/0x400
[ 1925.881257] ? rtnl_dellink+0x2d0/0x2d0
[ 1925.881264] netlink_rcv_skb+0x49/0x110
[ 1925.881275] netlink_unicast+0x171/0x200
[ 1925.881284] netlink_sendmsg+0x224/0x3f0
[ 1925.881299] sock_sendmsg+0x5e/0x60
[ 1925.881305] ___sys_sendmsg+0x2ae/0x330
[ 1925.881309] ? task_work_add+0x43/0x50
[ 1925.881314] ? fput_many+0x45/0x80
[ 1925.881329] ? __lock_acquire+0x248/0x1930
[ 1925.881342] ? find_held_lock+0x2b/0x80
[ 1925.881347] ? task_work_run+0x7b/0xd0
[ 1925.881359] __sys_sendmsg+0x59/0xa0
[ 1925.881375] do_syscall_64+0x5c/0xb0
[ 1925.881381] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1925.881384] RIP: 0033:0x7feb245047b8
[ 1925.881388] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83
ec 28 89 54
[ 1925.881391] RSP: 002b:00007ffc2d2a5788 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1925.881395] RAX: ffffffffffffffda RBX: 000000005d4497ed RCX: 00007feb245047b8
[ 1925.881398] RDX: 0000000000000000 RSI: 00007ffc2d2a57f0 RDI: 0000000000000003
[ 1925.881400] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006
[ 1925.881403] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001
[ 1925.881406] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001
Change tcf_police_rate_bytes_ps() and tcf_police_tcfp_burst() helpers to
allow using them from both rtnl and rcu protected contexts.
Fixes: 8c8cfc6ed274 ("net/sched: add police action to the hardware intermediate representation")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Looks like we were slightly overzealous with the shutdown()
cleanup. Even though the sock->sk_state can reach CLOSED again,
socket->state will not got back to SS_UNCONNECTED once
connections is ESTABLISHED. Meaning we will see EISCONN if
we try to reconnect, and EINVAL if we try to listen.
Only listen sockets can be shutdown() and reused, but since
ESTABLISHED sockets can never be re-connected() or used for
listen() we don't need to try to clean up the ULP state early.
Fixes: 32857cf57f92 ("net/tls: fix transition through disconnect with close")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a lot of those warnings with GCC8+ 64-bit,
In file included from ./include/linux/sctp.h:42,
from net/core/skbuff.c:47:
./include/uapi/linux/sctp.h:395:1: warning: alignment 4 of 'struct
sctp_paddr_change' is less than 8 [-Wpacked-not-aligned]
} __attribute__((packed, aligned(4)));
^
./include/uapi/linux/sctp.h:728:1: warning: alignment 4 of 'struct
sctp_setpeerprim' is less than 8 [-Wpacked-not-aligned]
} __attribute__((packed, aligned(4)));
^
./include/uapi/linux/sctp.h:727:26: warning: 'sspp_addr' offset 4 in
'struct sctp_setpeerprim' isn't aligned to 8 [-Wpacked-not-aligned]
struct sockaddr_storage sspp_addr;
^~~~~~~~~
./include/uapi/linux/sctp.h:741:1: warning: alignment 4 of 'struct
sctp_prim' is less than 8 [-Wpacked-not-aligned]
} __attribute__((packed, aligned(4)));
^
./include/uapi/linux/sctp.h:740:26: warning: 'ssp_addr' offset 4 in
'struct sctp_prim' isn't aligned to 8 [-Wpacked-not-aligned]
struct sockaddr_storage ssp_addr;
^~~~~~~~
./include/uapi/linux/sctp.h:792:1: warning: alignment 4 of 'struct
sctp_paddrparams' is less than 8 [-Wpacked-not-aligned]
} __attribute__((packed, aligned(4)));
^
./include/uapi/linux/sctp.h:784:26: warning: 'spp_address' offset 4 in
'struct sctp_paddrparams' isn't aligned to 8 [-Wpacked-not-aligned]
struct sockaddr_storage spp_address;
^~~~~~~~~~~
./include/uapi/linux/sctp.h:905:1: warning: alignment 4 of 'struct
sctp_paddrinfo' is less than 8 [-Wpacked-not-aligned]
} __attribute__((packed, aligned(4)));
^
./include/uapi/linux/sctp.h:899:26: warning: 'spinfo_address' offset 4
in 'struct sctp_paddrinfo' isn't aligned to 8 [-Wpacked-not-aligned]
struct sockaddr_storage spinfo_address;
^~~~~~~~~~~~~~
This is because the commit 20c9c825b12f ("[SCTP] Fix SCTP socket options
to work with 32-bit apps on 64-bit kernels.") added "packed, aligned(4)"
GCC attributes to some structures but one of the members, i.e, "struct
sockaddr_storage" in those structures has the attribute,
"aligned(__alignof__ (struct sockaddr *)" which is 8-byte on 64-bit
systems, so the commit overwrites the designed alignments for
"sockaddr_storage".
To fix this, "struct sockaddr_storage" needs to be aligned to 4-byte as
it is only used in those packed sctp structure which is part of UAPI,
and "struct __kernel_sockaddr_storage" is used in some other
places of UAPI that need not to change alignments in order to not
breaking userspace.
Use an implicit alignment for "struct __kernel_sockaddr_storage" so it
can keep the same alignments as a member in both packed and un-packed
structures without breaking UAPI.
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
drivers/acpi/scan.c: document why we don't need the device_hotplug_lock
memremap: move from kernel/ to mm/
lib/test_meminit.c: use GFP_ATOMIC in RCU critical section
asm-generic: fix -Wtype-limits compiler warnings
cgroup: kselftest: relax fs_spec checks
mm/memory_hotplug.c: remove unneeded return for void function
mm/migrate.c: initialize pud_entry in migrate_vma()
coredump: split pipe command whitespace before expanding template
page flags: prioritize kasan bits over last-cpuid
ubsan: build ubsan.c more conservatively
kasan: remove clang version check for KASAN_STACK
mm: compaction: avoid 100% CPU usage during compaction when a task is killed
mm: migrate: fix reference check race between __find_get_block() and migration
mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker
ocfs2: remove set but not used variable 'last_hash'
Revert "kmemleak: allow to coexist with fault injection"
kernel/signal.c: fix a kernel-doc markup
|
|
Commit d66acc39c7ce ("bitops: Optimise get_order()") introduced a
compilation warning because "rx_frag_size" is an "ushort" while
PAGE_SHIFT here is 16.
The commit changed the get_order() to be a multi-line macro where
compilers insist to check all statements in the macro even when
__builtin_constant_p(rx_frag_size) will return false as "rx_frag_size"
is a module parameter.
In file included from ./arch/powerpc/include/asm/page_64.h:107,
from ./arch/powerpc/include/asm/page.h:242,
from ./arch/powerpc/include/asm/mmu.h:132,
from ./arch/powerpc/include/asm/lppaca.h:47,
from ./arch/powerpc/include/asm/paca.h:17,
from ./arch/powerpc/include/asm/current.h:13,
from ./include/linux/thread_info.h:21,
from ./arch/powerpc/include/asm/processor.h:39,
from ./include/linux/prefetch.h:15,
from drivers/net/ethernet/emulex/benet/be_main.c:14:
drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create':
./include/asm-generic/getorder.h:54:9: warning: comparison is always
true due to limited range of data type [-Wtype-limits]
(((n) < (1UL << PAGE_SHIFT)) ? 0 : \
^
drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion
of macro 'get_order'
adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
^~~~~~~~~
Fix it by moving all of this multi-line macro into a proper function,
and killing __get_order() off.
[akpm@linux-foundation.org: remove __get_order() altogether]
[cai@lca.pw: v2]
Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw
Fixes: d66acc39c7ce ("bitops: Optimise get_order()")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: James Y Knight <jyknight@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ARM64 randdconfig builds regularly run into a build error, especially
when NUMA_BALANCING and SPARSEMEM are enabled but not SPARSEMEM_VMEMMAP:
#error "KASAN: not enough bits in page flags for tag"
The last-cpuid bits are already contitional on the available space, so
the result of the calculation is a bit random on whether they were
already left out or not.
Adding the kasan tag bits before last-cpuid makes it much more likely to
end up with a successful build here, and should be reliable for
randconfig at least, as long as that does not randomize NR_CPUS or
NODES_SHIFT but uses the defaults.
In order for the modified check to not trigger in the x86 vdso32 code
where all constants are wrong (building with -m32), enclose all the
definitions with an #ifdef.
[arnd@arndb.de: build fix]
Link: http://lkml.kernel.org/r/CAK8P3a3Mno1SWTcuAOT0Wa9VS15pdU6EfnkxLbDpyS55yO04+g@mail.gmail.com
Link: http://lkml.kernel.org/r/20190722115520.3743282-1-arnd@arndb.de
Link: https://lore.kernel.org/lkml/20190618095347.3850490-1-arnd@arndb.de/
Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull more drm fixes from Daniel Vetter:
"Dave sends his pull, everyone realizes they've been asleep at the
wheel and hits send on their own pulls :-/
Normally I'd just ignore these all because w/e for me and Dave. But
this time around the latecomers also included drm-intel-fixes, which
failed to send out a -fixes pull thus far for this release (screwed up
vacation coverage, despite that 2/3 maintainers were around ... they
all look appropriately guilty), and that really is overdue to get
landed.
And since I had to do a pull request anyway I pulled the other two
late ones too.
intel fixes (didn't have any ever since the main merge window pull):
- gvt fixes (2 cc: stable)
- fix gpu reset vs mm-shrinker vs wakeup fun (needed a few patches)
- two gem locking fixes (one cc: stable)
- pile of misc fixes all over with minor impact, 6 cc: stable, others
from this window
exynos:
- misc minor fixes
misc:
- some build/Kconfig fixes
- regression fix for vm scalability perf test which seems to mostly
exercise dmesg/console logging ...
- the vgem cache flush fix for arm64 broke the world on x86, so
that's reverted again
* tag 'drm-fixes-2019-08-02-1' of git://anongit.freedesktop.org/drm/drm: (42 commits)
Revert "drm/vgem: fix cache synchronization on arm/arm64"
drm/exynos: fix missing decrement of retry counter
drm/exynos: add CONFIG_MMU dependency
drm/exynos: remove redundant assignment to pointer 'node'
drm/exynos: using dev_get_drvdata directly
drm/bochs: Use shadow buffer for bochs framebuffer console
drm/fb-helper: Instanciate shadow FB if configured in device's mode_config
drm/fb-helper: Map DRM client buffer only when required
drm/client: Support unmapping of DRM client buffers
drm/i915: Only recover active engines
drm/i915: Add a wakeref getter for iff the wakeref is already active
drm/i915: Lift intel_engines_resume() to callers
drm/vgem: fix cache synchronization on arm/arm64
drm/i810: Use CONFIG_PREEMPTION
drm/bridge: tc358764: Fix build error
drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=m
drm/i915/gvt: Adding ppgtt to GVT GEM context after shadow pdps settled.
drm/i915/gvt: grab runtime pm first for forcewake use
drm/i915/gvt: fix incorrect cache entry for guest page mapping
drm/i915/gvt: Checking workload's gma earlier
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a small cleanup
- a fix for a build error on ARM with some configs
- a fix of a patch for the Xen gntdev driver
- three patches for fixing a potential problem in the swiotlb-xen
driver which Konrad was fine with me carrying them through the Xen
tree
* tag 'for-linus-5.3a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/swiotlb: remember having called xen_create_contiguous_region()
xen/swiotlb: simplify range_straddles_page_boundary()
xen/swiotlb: fix condition for calling xen_destroy_contiguous_region()
xen: avoid link error on ARM
xen/gntdev.c: Replace vm_map_pages() with vm_map_pages_zero()
xen/pciback: remove set but not used variable 'old_state'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes to four drivers with no core changes.
The mpt3sas one is theoretical until we get a CPU that goes up to 64
bits physical, the qla2xxx one fixes an oops in a driver
initialization error leg and the others are mostly cosmetic"
[ The fcoe patches may be worth highlighting - they may be "just"
cleanups, but they simplify and fix the odd fc_rport_priv structure
handling rules so that the new gcc-9 warnings about memset crossing
structure boundaries are gone.
The old code was hard for humans to understand too, and really
confused the compiler sanity checks - Linus ]
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix possible fcport null-pointer dereferences
scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA
scsi: hpsa: remove printing internal cdb on tag collision
scsi: hpsa: correct scsi command status issue after reset
scsi: fcoe: pass in fcoe_rport structure instead of fc_rport_priv
scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure
scsi: libfc: Whitespace cleanup in libfc.h
|
|
Pull block fixes from Jens Axboe:
"Here's a small collection of fixes that should go into this series.
This contains:
- io_uring potential use-after-free fix (Jackie)
- loop regression fix (Jan)
- O_DIRECT fragmented bio regression fix (Damien)
- Mark Denis as the new floppy maintainer (Denis)
- ataflop switch fall-through annotation (Gustavo)
- libata zpodd overflow fix (Kees)
- libata ahci deferred probe fix (Miquel)
- nbd invalidation BUG_ON() fix (Munehisa)
- dasd endless loop fix (Stefan)"
* tag 'for-linus-20190802' of git://git.kernel.dk/linux-block:
s390/dasd: fix endless loop after read unit address configuration
block: Fix __blkdev_direct_IO() for bio fragments
MAINTAINERS: floppy: take over maintainership
nbd: replace kill_bdev() with __invalidate_device() again
ata: libahci: do not complain in case of deferred probe
io_uring: fix KASAN use after free in io_sq_wq_submit_work
loop: Fix mount(2) failure due to race with LOOP_SET_FD
libata: zpodd: Fix small read overflow in zpodd_get_mech_type()
ataflop: Mark expected switch fall-through
|
|
Pull rdma fixes from Doug Ledford:
"Here's our second -rc pull request. Nothing particularly special in
this one. The client removal deadlock fix is kindy tricky, but we had
multiple eyes on it and no one could find a fault in it. A couple
Spectre V1 fixes too. Otherwise, all just normal -rc fodder:
- A couple Spectre V1 fixes (umad, hfi1)
- Fix a tricky deadlock in the rdma core code with refcounting
instead of locks (client removal patches)
- Build errors (hns)
- Fix a scheduling while atomic issue (mlx5)
- Use after free fix (mad)
- Fix error path return code (hns)
- Null deref fix (siw_crypto_hash)
- A few other misc. minor fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Fix error return code in hns_roce_v1_rsv_lp_qp()
RDMA/mlx5: Release locks during notifier unregister
IB/hfi1: Fix Spectre v1 vulnerability
IB/mad: Fix use-after-free in ib mad completion handling
RDMA/restrack: Track driver QP types in resource tracker
IB/mlx5: Fix MR registration flow to use UMR properly
RDMA/devices: Remove the lock around remove_client_context
RDMA/devices: Do not deadlock during client removal
IB/core: Add mitigation for Spectre V1
Do not dereference 'siw_crypto_shash' before checking
RDMA/qedr: Fix the hca_type and hca_rev returned in device attributes
RDMA/hns: Fix build error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few fixes for code that came in during the merge window or that
started getting exercised differently this time around:
- Select regmap MMIO kconfig in spreadtrum driver to avoid compile
errors
- Complete kerneldoc on devm_clk_bulk_get_optional()
- Register an essential clk earlier on mediatek mt8183 SoCs so the
clocksource driver can use it
- Fix divisor math in the at91 driver
- Plug a race in Renesas reset control logic"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: renesas: cpg-mssr: Fix reset control race condition
clk: sprd: Select REGMAP_MMIO to avoid compile errors
clk: mediatek: mt8183: Register 13MHz clock earlier for clocksource
clk: Add missing documentation of devm_clk_bulk_get_optional() argument
clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1
|
|
Add a pool of flow counters, based on flow counter bulks, removing the
need to allocate a new counter via a costly FW command during the flow
creation process. The time it takes to acquire/release a flow counter
is cut from ~50 [us] to ~50 [ns].
The pool is part of the mlx5 driver instance, and provides flow
counters for aging flows. mlx5_fc_create() was modified to provide
counters for aging flows from the pool by default, and
mlx5_destroy_fc() was modified to release counters back to the pool
for later reuse. If bulk allocation is not supported or fails, and for
non-aging flows, the fallback behavior is to allocate and free
individual counters.
The pool is comprised of three lists of flow counter bulks, one of
fully used bulks, one of partially used bulks, and one of unused
bulks. Counters are provided from the partially used bulks first, to
help limit bulk fragmentation.
The pool maintains a threshold, and strives to maintain the amount of
available counters below it. The pool is increased in size when a
counter acquisition request is made and there are no available
counters, and it is decreased in size when the last counter in a bulk
is released and there are more available counters than the threshold.
All pool size changes are done in the context of the
acquiring/releasing process.
The value of the threshold is directly correlated to the amount of
used counters the pool is providing, while constrained by a hard
maximum, and is recalculated every time a bulk is allocated/freed.
This ensures that the pool only consumes large amounts of memory for
available counters if the pool is being used heavily. When fully
populated and at the hard maximum, the buffer of available counters
consumes ~40 [MB].
Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Misc updates from mlx5-next branch.
1) Eli improves the handling of the support for QoS element type
2) Gavi refactors and prepares mlx5 flow counters for bulk allocation
support
3) Parav, refactors and improves E-Switch load/unload flows
4) Saeed, two misc cleanups
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Check if firmware supports the requested element type before
attempting to create the element type.
In addition, explicitly specify the request element type and tsar type.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
First reserved field is off by one instead of reserved_at_1 it should be
reserved_at_2, fix that.
Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add a handle to invoke the new FW capability of allocating a bulk of
flow counters.
Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Towards introducing the ability to allocate bulks of flow counters,
refactor the flow counter bulk query process, removing functions and
structs whose names indicated being used for flow counter bulk
allocation FW commands, despite them actually only being used to
support bulk querying, and migrate their functionality to correctly
named functions in their natural location, fs_counters.c.
Additionally, optimize the bulk query process by:
* Extracting the memory used for the query to mlx5_fc_stats so
that it is only allocated once, and not for each bulk query.
* Querying all the counters in one function call.
Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Due to the complexity of client->remove() callbacks it is desirable to not
hold any locks while calling them. Remove the last one by tracking only
the highest client ID and running backwards from there over the xarray.
Since the only purpose of that lock was to protect the linked list, we can
drop the lock.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081841.32345-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
lockdep reports:
WARNING: possible circular locking dependency detected
modprobe/302 is trying to acquire lock:
0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990
but task is already holding lock:
000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&device->client_data_rwsem){++++}:
down_read+0x3f/0x160
ib_get_net_dev_by_params+0xd5/0x200 [ib_core]
cma_ib_req_handler+0x5f6/0x2090 [rdma_cm]
cm_process_work+0x29/0x110 [ib_cm]
cm_req_handler+0x10f5/0x1c00 [ib_cm]
cm_work_handler+0x54c/0x311d [ib_cm]
process_one_work+0x4aa/0xa30
worker_thread+0x62/0x5b0
kthread+0x1ca/0x1f0
ret_from_fork+0x24/0x30
-> #1 ((work_completion)(&(&work->work)->work)){+.+.}:
process_one_work+0x45f/0xa30
worker_thread+0x62/0x5b0
kthread+0x1ca/0x1f0
ret_from_fork+0x24/0x30
-> #0 ((wq_completion)ib_cm){+.+.}:
lock_acquire+0xc8/0x1d0
flush_workqueue+0x102/0x990
cm_remove_one+0x30e/0x3c0 [ib_cm]
remove_client_context+0x94/0xd0 [ib_core]
disable_device+0x10a/0x1f0 [ib_core]
__ib_unregister_device+0x5a/0xe0 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib]
__mlx5_ib_remove+0x3d/0x70 [mlx5_ib]
mlx5_ib_remove+0x12e/0x140 [mlx5_ib]
mlx5_remove_device+0x144/0x150 [mlx5_core]
mlx5_unregister_interface+0x3f/0xf0 [mlx5_core]
mlx5_ib_cleanup+0x10/0x3a [mlx5_ib]
__x64_sys_delete_module+0x227/0x350
do_syscall_64+0xc3/0x6a4
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Which is due to the read side of the client_data_rwsem being obtained
recursively through a work queue flush during cm client removal.
The lock is being held across the remove in remove_client_context() so
that the function is a fence, once it returns the client is removed. This
is required so that the two callers do not proceed with destruction until
the client completes removal.
Instead of using client_data_rwsem use the existing device unregistration
refcount and add a similar client unregistration (client->uses) refcount.
This will fence the two unregistration paths without holding any locks.
Cc: <stable@vger.kernel.org>
Fixes: 921eab1143aa ("RDMA/devices: Re-organize device.c locking")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Three GPIO fixes, all touching the core, so quite important:
- Fix the request of active low GPIO line events.
- Don't issue WARN() stuff on NULL descriptors if the GPIOLIB is
disabled.
- Preserve the descriptor flags when setting the initial direction on
lines"
* tag 'gpio-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: Preserve desc->flags when setting state
gpio: don't WARN() on NULL descs if gpiolib is disabled
gpiolib: fix incorrect IRQ requesting of an active-low lineevent
|
|
Generic framebuffer emulation uses a shadow buffer for framebuffers with
dirty() function. If drivers want to use the shadow FB without such a
function, they can now set prefer_shadow or prefer_shadow_fbdev in their
mode_config structures. The former flag is exported to userspace, the
latter flag is fbdev-only.
v3:
* only schedule dirty worker if fbdev uses shadow fb
* test shadow fb settings with boolean operators
* use bool for struct drm_mode_config.prefer_shadow_fbdev
* fix documentation comments
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315834/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
