| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit bb2784d9ab49587ba4fbff37a319fff2924db289 upstream.
While converting users of msecs_to_jiffies(), lkp reported that some range
checks would always be true because of the mismatch between the implied int
value of secs_to_jiffies() vs the unsigned long return value of the
msecs_to_jiffies() calls it was replacing.
Fix this by casting the secs_to_jiffies() input value to unsigned long.
Fixes: b35108a51cf7ba ("jiffies: Define secs_to_jiffies()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250130192701.99626-1-eahariha@linux.microsoft.com
Closes: https://lore.kernel.org/oe-kbuild-all/202501301334.NB6NszQR-lkp@intel.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b35108a51cf7bab58d7eace1267d7965978bcdb8 upstream.
secs_to_jiffies() is defined in hci_event.c and cannot be reused by
other call sites. Hoist it into the core code to allow conversion of the
~1150 usages of msecs_to_jiffies() that either:
- use a multiplier value of 1000 or equivalently MSEC_PER_SEC, or
- have timeouts that are denominated in seconds (i.e. end in 000)
It's implemented as a macro to allow usage in static initializers.
This will also allow conversion of yet more sites that use (sec * HZ)
directly, and improve their readability.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Link: https://lore.kernel.org/all/20241030-open-coded-timeouts-v3-1-9ba123facf88@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 761fb8ec8778f0caf2bba5a41e3cff1ea86974f3 upstream.
This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f88a31308db6a856229150039b0f56d59696ed31 upstream.
Eliminate all kernel-doc warnings in seqlock.h:
- correct the macro to have "()" immediately following the macro name
- don't include the macro parameters in the short description (first line)
- make the parameter names in the comments match the actual macro
parameter names.
- use "::" for the Example
WARNING: include/linux/seqlock.h:1341 This comment starts with '/**', but isn't a kernel-doc comment.
* scoped_seqlock_read (lock, ss_state) - execute the read side critical
Documentation/locking/seqlock:242: include/linux/seqlock.h:1351: WARNING:
Definition list ends without a blank line; unexpected unindent. [docutils]
Warning: include/linux/seqlock.h:1357 function parameter '_seqlock' not described in 'scoped_seqlock_read'
Warning: include/linux/seqlock.h:1357 function parameter '_target' not described in 'scoped_seqlock_read'
Fixes: cc39f3872c08 ("seqlock: Introduce scoped_seqlock_read()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260123183749.3997533-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f19590b07cb620be1fcd5474c49515e21a05d406 ]
Netfilter code (net/netfilter/nft_log.c and net/netfilter/xt_AUDIT.c)
have to be kept in sync. Both source files had duplicated versions of
audit_ip4() and audit_ip6() functions, which can result in lack of
consistency and/or duplicated work.
This patch adds a helper function in audit.c that can be called by
netfilter code commonly, aiming to improve maintainability and
consistency.
Suggested-by: Florian Westphal <fw@strlen.de>
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Stable-dep-of: 65dfde57d1e2 ("audit: fix potential integer overflow in audit_log_n_hex()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 48a97ffc6c826640907d13b199e29008f4fe2c15 ]
We have many places which open-code what's now is bpf_rcu_lock_held()
macro, so replace all those places with a clean and short macro invocation.
For that, move bpf_rcu_lock_held() macro into include/linux/bpf.h.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20251014201403.4104511-1-andrii@kernel.org
Stable-dep-of: 2f884d371faf ("bpf: Allow LPM map access from sleepable BPF programs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cc39f3872c0865bef992b713338df369554fa9e0 ]
The read_seqbegin/need_seqretry/done_seqretry API is cumbersome and
error prone. With the new helper the "typical" code like
int seq, nextseq;
unsigned long flags;
nextseq = 0;
do {
seq = nextseq;
flags = read_seqbegin_or_lock_irqsave(&seqlock, &seq);
// read-side critical section
nextseq = 1;
} while (need_seqretry(&seqlock, seq));
done_seqretry_irqrestore(&seqlock, seq, flags);
can be rewritten as
scoped_seqlock_read (&seqlock, ss_lock_irqsave) {
// read-side critical section
}
Original idea by Oleg Nesterov; with contributions from Linus.
Originally-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Stable-dep-of: 6650527444da ("proc: protect ptrace_may_access() with exec_update_lock (part 1)")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5e0ae59159e3a07391a35865bb79ff335473fa79 ]
Introduce haptic usages as defined in HID Usage Tables specification.
Add HID units for newton and gram.
Signed-off-by: Angela Czubak <aczubak@google.com>
Co-developed-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Stable-dep-of: 8813b0612275 ("HID: multitouch: fix out-of-bounds bit access on mt_io_flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e1b849cfa6b61f1c866a908c9e8dd9b5aaab820b ]
There can be multiple inode switch works that are trying to switch
inodes to / from the same wb. This can happen in particular if some
cgroup exits which owns many (thousands) inodes and we need to switch
them all. In this case several inode_switch_wbs_work_fn() instances will
be just spinning on the same wb->list_lock while only one of them makes
forward progress. This wastes CPU cycles and quickly leads to softlockup
reports and unusable system.
Instead of running several inode_switch_wbs_work_fn() instances in
parallel switching to the same wb and contending on wb->list_lock, run
just one work item per wb and manage a queue of isw items switching to
this wb.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Stable-dep-of: cba38ec4cbd3 ("writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 13218453521d75916dfed55efb8e809bfc03cb4b ]
This enables buffer flow control for SCO/eSCO
(see: Bluetooth Core 6.0 spec: 6.22. Synchronous Flow Control Enable),
recently this has caused the following problem and is actually a nice
addition for the likes of Socket TX complete:
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0
> HCI Event: Command Complete (0x0e) plen 11
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 1021 ACL max packet: 5
SCO MTU: 240 SCO max packet: 8
...
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
> HCI Event: Hardware Error (0x10) plen 1
Code: 0x0a
To fix the code will now attempt to enable buffer flow control when
HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED is set by the driver:
< HCI Command: Write Sync Fl.. (0x03|0x002f) plen 1
Flow control: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4
Write Sync Flow Control Enable (0x03|0x002f) ncmd 1
Status: Success (0x00)
On success then HCI_SCO_FLOWCTL would be set which indicates sco_cnt
shall be used for flow contro.
Fixes: 7fedd3bb6b77 ("Bluetooth: Prioritize SCO traffic")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Pauli Virtanen <pav@iki.fi>
Stable-dep-of: 12917f591cea ("Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6c3ea155e5ee3e56606233acde8309afda66d483 ]
This attempts to proper track outstanding request by using struct ida
and allocating from it in l2cap_get_ident using ida_alloc_range which
would reuse ids as they are free, then upon completion release
the id using ida_free.
This fixes the qualification test case L2CAP/COS/CED/BI-29-C which
attempts to check if the host stack is able to work after 256 attempts
to connect which requires Ident field to use the full range of possible
values in order to pass the test.
Link: https://github.com/bluez/bluez/issues/1829
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Stable-dep-of: 2641a9e0a1dd ("Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6fef032af0092ed5ccb767239a9ac1bc38c08a40 ]
l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after
release_sock(parent). Once the parent lock is dropped the newly
enqueued child socket sk is reachable via the accept queue, so another
task can accept and free it before the callback dereferences sk,
resulting in a use-after-free.
Rework the ->new_connection() op so the core, rather than the callback,
owns the child channel's lifetime. The op now receives a pre-allocated
new_chan and returns an errno instead of allocating and returning a
channel. l2cap_new_connection() allocates the child channel and links
it into the conn list via __l2cap_chan_add() before invoking the
callback, so the conn-list reference keeps the channel alive once
release_sock(parent) exposes the socket to other tasks.
Channel configuration that was duplicated in l2cap_sock_init() and the
various new_connection callbacks is consolidated into
l2cap_chan_set_defaults(), which now inherits from the parent channel
when one is supplied.
Fixes: 8ffb929098a5 ("Bluetooth: Remove parent socket usage from l2cap_core.c")
Cc: stable@kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e7b02296fb400ee64822fbdd81a0718449066333 ]
High Speed, Alternate MAC and PHY (AMP) extension, has been removed from
Bluetooth Core specification on 5.3:
https://www.bluetooth.com/blog/new-core-specification-v5-3-feature-enhancements/
Fixes: 244bc377591c ("Bluetooth: Add BT_HS config option")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 6fef032af009 ("Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 181a42edddf51d5d9697ecdf365d72ebeab5afb0 ]
The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if
the handle of the first hci_conn entry in hci_dev->conn_hash->list
is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of
hci_conn->handle to make it be unique.
Fixes: 9f78191cc9f1 ("Bluetooth: hci_conn: Always allocate unique handles")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 6fef032af009 ("Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 337b1b566db087347194e4543ddfdfa5645275cc ]
BAR resize operation is implemented in the pci_resize_resource() and
pbus_reassign_bridge_resources() functions. pci_resize_resource() can be
called either from __resource_resize_store() from sysfs or directly by the
driver for the Endpoint Device.
The pci_resize_resource() requires that caller has released the device
resources that share the bridge window with the BAR to be resized as
otherwise the bridge window is pinned in place and cannot be changed.
pbus_reassign_bridge_resources() rolls back resources if the resize
operation fails, but rollback is performed only for the bridge windows.
Because releasing the device resources are done by the caller of the BAR
resize interface, these functions performing the BAR resize do not have
access to the device resources as they were before the resize.
pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources()
after rolling back the bridge windows as they were, however, it will not
guarantee the resource are assigned due to differences in how FW and the
kernel assign the resources (alignment of the start address and tail).
To perform rollback robustly, the BAR resize interface has to be altered to
also release the device resources that share the bridge window with the BAR
to be resized.
Also, remove restoring from the entries failed list as saved list should
now contain both the bridge windows and device resources so the extra
restore is duplicated work.
Some drivers (currently only amdgpu) want to prevent releasing some
resources. Add exclude_bars param to pci_resize_resource() and make amdgpu
pass its register BAR (BAR 2 or 5), which should never be released during
resize operation. Normally 64-bit prefetchable resources do not share a
bridge window with the 32-bit only register BAR, but there are various
fallbacks in the resource assignment logic which may make the resources
share the bridge window in rare cases.
This change (together with the driver side changes) is to counter the
resource releases that had to be done to prevent resource tree corruption
in the ("PCI: Release assigned resource before restoring them") change. As
such, it likely restores functionality in cases where device resources were
released to avoid resource tree conflicts which appeared to be "working"
when such conflicts were not correctly detected by the kernel.
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash amdgpu BAR selection from
https: //lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
Stable-dep-of: ee7471fe968d ("PCI: Skip Resizable BAR restore on read error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4575e9aac5336d1365138c0284773bf8da4b1fa3 ]
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state(). There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot. Therefore
the module parameter was made writable.
Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified. The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init. Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.
Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted. PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers. This introduces a window where PM operations
can now become unbalanced.
To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.
NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag. When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper.
Fixes: 7ab5e10eda02 ("vfio/pci: Move the unused device into low power state with runtime PM")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-2-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 40ef3edf151e184d021917a5c4c771cc0870844a ]
The current implementation uses pci_num_vf() while holding the
memory_lock to prevent changing the power state of a PF when
VFs are enabled. This creates a lockdep circular dependency
warning because memory_lock is held during device probing.
[ 286.997167] ======================================================
[ 287.003363] WARNING: possible circular locking dependency detected
[ 287.009562] 7.0.0-dbg-DEV #3 Tainted: G S
[ 287.015074] ------------------------------------------------------
[ 287.021270] vfio_pci_sriov_/18636 is trying to acquire lock:
[ 287.026942] ff45bea2294d4968 (&vdev->memory_lock){+.+.}-{4:4}, at:
vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.036530]
[ 287.036530] but task is already holding lock:
[ 287.042383] ff45bea3a96b8230 (&new_dev_set->lock){+.+.}-{4:4}, at:
vfio_group_fops_unl_ioctl+0x44d/0x7b0
[ 287.051879]
[ 287.051879] which lock already depends on the new lock.
[ 287.051879]
[ 287.060070]
[ 287.060070] the existing dependency chain (in reverse order) is:
[ 287.067568]
[ 287.067568] -> #2 (&new_dev_set->lock){+.+.}-{4:4}:
[ 287.073941] __mutex_lock+0x92/0xb80
[ 287.078058] vfio_assign_device_set+0x66/0x1b0
[ 287.083042] vfio_pci_core_register_device+0xd1/0x2a0
[ 287.088638] vfio_pci_probe+0xd2/0x100
[ 287.092933] local_pci_probe_callback+0x4d/0xa0
[ 287.098001] process_scheduled_works+0x2ca/0x680
[ 287.103158] worker_thread+0x1e8/0x2f0
[ 287.107452] kthread+0x10c/0x140
[ 287.111230] ret_from_fork+0x18e/0x360
[ 287.115519] ret_from_fork_asm+0x1a/0x30
[ 287.119983]
[ 287.119983] -> #1 ((work_completion)(&arg.work)){+.+.}-{0:0}:
[ 287.127219] __flush_work+0x345/0x490
[ 287.131429] pci_device_probe+0x2e3/0x490
[ 287.135979] really_probe+0x1f9/0x4e0
[ 287.140180] __driver_probe_device+0x77/0x100
[ 287.145079] driver_probe_device+0x1e/0x110
[ 287.149803] __device_attach_driver+0xe3/0x170
[ 287.154789] bus_for_each_drv+0x125/0x150
[ 287.159346] __device_attach+0xca/0x1a0
[ 287.163720] device_initial_probe+0x34/0x50
[ 287.168445] pci_bus_add_device+0x6e/0x90
[ 287.172995] pci_iov_add_virtfn+0x3c9/0x3e0
[ 287.177719] sriov_add_vfs+0x2c/0x60
[ 287.181838] sriov_enable+0x306/0x4a0
[ 287.186038] vfio_pci_core_sriov_configure+0x184/0x220
[ 287.191715] sriov_numvfs_store+0xd9/0x1c0
[ 287.196351] kernfs_fop_write_iter+0x13f/0x1d0
[ 287.201338] vfs_write+0x2be/0x3b0
[ 287.205286] ksys_write+0x73/0x100
[ 287.209233] do_syscall_64+0x14d/0x750
[ 287.213529] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 287.219120]
[ 287.219120] -> #0 (&vdev->memory_lock){+.+.}-{4:4}:
[ 287.225491] __lock_acquire+0x14c6/0x2800
[ 287.230048] lock_acquire+0xd3/0x2f0
[ 287.234168] down_write+0x3a/0xc0
[ 287.238019] vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.243436] __rpm_callback+0x8c/0x310
[ 287.247730] rpm_resume+0x529/0x6f0
[ 287.251765] __pm_runtime_resume+0x68/0x90
[ 287.256402] vfio_pci_core_enable+0x44/0x310
[ 287.261216] vfio_pci_open_device+0x1c/0x80
[ 287.265947] vfio_df_open+0x10f/0x150
[ 287.270148] vfio_group_fops_unl_ioctl+0x4a4/0x7b0
[ 287.275476] __se_sys_ioctl+0x71/0xc0
[ 287.279679] do_syscall_64+0x14d/0x750
[ 287.283975] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 287.289559]
[ 287.289559] other info that might help us debug this:
[ 287.289559]
[ 287.297582] Chain exists of:
[ 287.297582] &vdev->memory_lock --> (work_completion)(&arg.work)
--> &new_dev_set->lock
[ 287.297582]
[ 287.310023] Possible unsafe locking scenario:
[ 287.310023]
[ 287.315961] CPU0 CPU1
[ 287.320510] ---- ----
[ 287.325059] lock(&new_dev_set->lock);
[ 287.328917]
lock((work_completion)(&arg.work));
[ 287.336153] lock(&new_dev_set->lock);
[ 287.342523] lock(&vdev->memory_lock);
[ 287.346382]
[ 287.346382] *** DEADLOCK ***
[ 287.346382]
[ 287.352315] 2 locks held by vfio_pci_sriov_/18636:
[ 287.357125] #0: ff45bea208ed3e18 (&group->group_lock){+.+.}-{4:4},
at: vfio_group_fops_unl_ioctl+0x3e3/0x7b0
[ 287.367048] #1: ff45bea3a96b8230 (&new_dev_set->lock){+.+.}-{4:4},
at: vfio_group_fops_unl_ioctl+0x44d/0x7b0
[ 287.376976]
[ 287.376976] stack backtrace:
[ 287.381353] CPU: 191 UID: 0 PID: 18636 Comm: vfio_pci_sriov_
Tainted: G S 7.0.0-dbg-DEV #3 PREEMPTLAZY
[ 287.381355] Tainted: [S]=CPU_OUT_OF_SPEC
[ 287.381356] Call Trace:
[ 287.381357] <TASK>
[ 287.381358] dump_stack_lvl+0x54/0x70
[ 287.381361] print_circular_bug+0x2e1/0x300
[ 287.381363] check_noncircular+0xf9/0x120
[ 287.381364] ? __lock_acquire+0x5b4/0x2800
[ 287.381366] __lock_acquire+0x14c6/0x2800
[ 287.381368] ? pci_mmcfg_read+0x4f/0x220
[ 287.381370] ? pci_mmcfg_write+0x57/0x220
[ 287.381371] ? lock_acquire+0xd3/0x2f0
[ 287.381373] ? pci_mmcfg_write+0x57/0x220
[ 287.381374] ? lock_release+0xef/0x360
[ 287.381376] ? vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.381377] lock_acquire+0xd3/0x2f0
[ 287.381378] ? vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.381379] ? lock_is_held_type+0x76/0x100
[ 287.381382] down_write+0x3a/0xc0
[ 287.381382] ? vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.381383] vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.381384] ? __pfx_pci_pm_runtime_resume+0x10/0x10
[ 287.381385] __rpm_callback+0x8c/0x310
[ 287.381386] ? ktime_get_mono_fast_ns+0x3d/0xb0
[ 287.381389] ? __pfx_pci_pm_runtime_resume+0x10/0x10
[ 287.381390] rpm_resume+0x529/0x6f0
[ 287.381392] ? lock_is_held_type+0x76/0x100
[ 287.381394] __pm_runtime_resume+0x68/0x90
[ 287.381396] vfio_pci_core_enable+0x44/0x310
[ 287.381398] vfio_pci_open_device+0x1c/0x80
[ 287.381399] vfio_df_open+0x10f/0x150
[ 287.381401] vfio_group_fops_unl_ioctl+0x4a4/0x7b0
[ 287.381402] __se_sys_ioctl+0x71/0xc0
[ 287.381404] do_syscall_64+0x14d/0x750
[ 287.381405] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 287.381406] ? trace_irq_disable+0x25/0xd0
[ 287.381409] entry_SYSCALL_64_after_hwframe+0x77/0x7f
Introduce a private flag 'sriov_active' in the vfio_pci_core_device
struct. This allows the driver to track the SR-IOV power state requirement
without relying on pci_num_vf() while holding the memory_lock. The lock is
now only held to set the flag and ensure the device is in D0, after which
pci_enable_sriov() can be called without the lock.
Fixes: f4162eb1e2fc ("vfio/pci: Change the PF power state to D0 before enabling VFs")
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20260514173449.3282188-1-rananta@google.com
[promote bitfield to plain bool to avoid storage-unit races]
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9cd0f6d5cbb6fda09aa83beb8146c287a552017e ]
struct vfio_pci_core_device contains eleven boolean flags.
Boolean flags clearly indicate their usage but space usage
starts to be a concern when there are many.
An upcoming change adds another boolean flag to
struct vfio_pci_core_device, thereby increasing the concern
that the boolean flags are consuming unnecessary space.
Transition the boolean flags to use bitfields. On a system that
uses one byte per boolean this reduces the space consumed
by existing flags from 11 bytes to 2 bytes with room for
a few more flags without increasing the structure's size.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/cf34bf0499c889554a8105eeb18cc0ab673005be.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Stable-dep-of: 40ef3edf151e ("vfio/pci: Use a private flag to prevent power state change with VFs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7d8296b250f2eed73f1758607926d4d258dea5d4 ]
Avoid open-coding that simple expression each time by moving
BYTES_TO_BITS() from the probes code to <linux/bitops.h> to export
it to the rest of the kernel.
Simplify the macro while at it. `BITS_PER_LONG / sizeof(long)` always
equals to %BITS_PER_BYTE, regardless of the target architecture.
Do the same for the tools ecosystem as well (incl. its version of
bitops.h). The previous implementation had its implicit type of long,
while the new one is int, so adjust the format literal accordingly in
the perf code.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 55052184ac90 ("iio: common: st_sensors: honour channel endianness in read_axis_data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bf8367b00c33c64a9391c262bb2e11d274c9f2a4 ]
When a sensor is running and there is a FIFO frequency change due to
another sensor turned on/off, there are glitches on timestamp. Fix that
by using only interrupt timestamp when there is the corresponding sensor
data in the FIFO.
Delete FIFO period handling and simplify internal functions.
Update integration inside inv_mpu6050 and inv_icm42600 drivers.
Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic")
Cc: Stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240426094835.138389-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0ecc363ccea71eda6a2cceade120489259bcdb33 ]
Rename common module to inv_sensors_timestamp, add configuration
at init (chip internal clock, acceptable jitter, ...) and update
inv_icm42600 driver integration.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230606162147.79667-4-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d99ff463ecf651437e9e4abe68f331dfb6b5bd9d ]
Create new inv_sensors common modules and move inv_icm42600
timestamp module inside. This module will be used by IMUs and
also in the future by other chips.
Modify inv_icm42600 driver to use timestamp module and do some
headers cleanup.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230606162147.79667-3-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9c9b37f8c5505224e8d206184df3bb668ee00cf upstream.
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic.
Fixes: 34666d467cbf ("netfilter: bridge: move br_netfilter out of the core")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bae7ce7bafb59e42dc0e0e2999fdd9d1cffe3866 ]
IPVS callers already parse the packet into struct ip_vs_iphdr before
updating connection state. For IPv6 this records the real
transport-header offset after extension headers in iph.len.
Pass this parsed transport offset through ip_vs_set_state() and the
protocol state_transition() callback so protocol handlers can use the
same packet context as scheduling and NAT handling. This patch only
changes the common callback plumbing and adapts the protocol callback
signatures; TCP and SCTP start using the value in follow-up patches.
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 2500fa3958b1 ("ipvs: use parsed transport offset in TCP state lookup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b26518b6896a16b809b1e42986f4ebac7bccc1e ]
A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.
During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.
Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.
However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd076d8deeab6f9f18ef13400f89e1f550df665b ]
slen contains ISO_SDU_Length (12 bits), RFU (2 bits),
Packet_Status_Flags (2 bits).
Exclude the RFU bits from hci_iso_data_len. Also add masks to the pack
macro.
Fixes: 4de0fc599eb9 ("Bluetooth: Add definitions for CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d335dcc6f521571d57117b8deeebc940836e5450 ]
GUE private flags can indicate that remote checksum offload metadata is
present. The private flags field itself is accounted for by
guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even
when GUE_PFLAG_REMCSUM is set.
This lets a packet with only the private flags field pass
validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum()
read the missing REMCSUM start/offset fields from the following bytes.
Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that
malformed packets are rejected during option validation.
Fixes: c1aa8347e73e ("gue: Protocol constants for remote checksum offload")
Signed-off-by: Qihang <q.h.hack.winter@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b72f0db64205d9ce462038ba995d5d31eff32dc1 ]
When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added,
fib_lookup() performs route lookup directly on two tables.
Since the first lookup does not properly bail out, the result
of an error route in the merged local/main table could be
overwritten by another route in the default table:
# unshare -n
# ip link set lo up
# ip route add 192.168.0.0/24 dev lo table 253
# ip route add unreachable 192.168.0.0/24
# ip route get 192.168.0.1
192.168.0.1 dev lo table default uid 0
cache <local>
Once a random rule is added, the error route is respected:
# ip rule add table 0
# ip rule del table 0
# ip route get 192.168.0.1
RTNETLINK answers: No route to host
Let's fix the inconsistent behaviour.
Fixes: f4530fa574df ("ipv4: Avoid overhead when no custom FIB rules are installed.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260619212753.3367244-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8bd2f71054bd0bc997833e9825143672eb7e2801 ]
These API has been introduced:
* virtqueue_dma_need_sync
* virtqueue_dma_sync_single_range_for_cpu
* virtqueue_dma_sync_single_range_for_device
These APIs can be used together with the premapped mechanism to sync the
DMA address.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230810123057.43407-12-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: 9e5ad06ea826 ("virtio-net: fix len check in receive_big()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b6253b4e21939f1bb54e8fdb84c23af9c3fb834a ]
Added virtqueue_dma_map_api* to map DMA addresses for virtual memory in
advance. The purpose is to keep memory mapped across multiple add/get
buf operations.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230810123057.43407-11-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: 9e5ad06ea826 ("virtio-net: fix len check in receive_big()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8daafe9ebbd21a54bf91f9ff81decf215c203edd ]
This helper allows the driver change the dma mode to premapped mode.
Under the premapped mode, the virtio core do not do dma mapping
internally.
This just work when the use_dma_api is true. If the use_dma_api is false,
the dma options is not through the DMA APIs, that is not the standard
way of the linux kernel.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230810123057.43407-4-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: 9e5ad06ea826 ("virtio-net: fix len check in receive_big()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d8297e26b4e20b5d1c3c3fe51fe81a1c7fbc823 ]
SCTP_DIAG endpoint dumping was traversing endpoint address lists without
holding lock_sock(), while those lists could change concurrently via
socket operations (e.g., bindx changes). This creates a race where
nla_reserve() counts addresses under RCU protection, but the subsequent
copy may see fewer entries, potentially leaking uninitialized memory to
userspace.
Fix this by:
- Taking a reference on each endpoint during hash traversal
- Moving socket operations (lock_sock()) outside read_lock_bh()
- Serializing address list access during dump
- Reworking sctp_for_each_endpoint() to support restart-based traversal
with (net, pos) tracking
Also:
- Add WARN_ON_ONCE() for inconsistent address counts
- Fix idiag_states filtering for LISTEN vs association cases
- Skip dumping endpoints being freed (ep->base.dead)
- Move dump position tracking into iterator, removing cb->args[4] and
its comment for sctp_ep_dump().,
- Update the comment for cb->args[4] and remove the comment for unused
cb->args[5] for sctp_sock_dump().
Note: traversal is restart-based and may re-scan buckets multiple times,
but this is acceptable due to small bucket sizes and required to support
sleeping-safe callbacks.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative.
Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com>
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/4c1b49ab87e0f7d552ebd8172b364b1994e913c9.1781552190.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 40f0b1047918539f0b0f795ac65e35336b4c2c78 ]
syzbot reported a shift-out-of-bounds in xfrm_selector_match()
due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched
against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set).
Fix this by:
- Rejecting mismatched families in xfrm_selector_match.
- Returning false in addr4_match if prefixlen > 32.
- Returning false in addr_match if prefixlen > 128 (prevents overflow).
Fixes: 3f0ab59e6537 ("xfrm: validate new SA's prefixlen using SA family when sel.family is unset")
Reported-by: syzbot+9383b1ff0df4b29ca5e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a2fbe35.be3f099c.2836ae.0018.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68de007d5ac9df0e3f4f187a179c5c842bb5a2be ]
KCSAN reported a data race involving net->xfrm.policy_count access.
Add missing READ_ONCE()/WRITE_ONCE() annotations on
xfrm_policy_count and xfrm_policy_default.
Fixes: 2518c7c2b3d7 ("[XFRM]: Hash policies when non-prefixed.")
Reported-by: syzbot+d85ba1c732720b9a4097@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a2b9e96.99669fcc.12a77b.0006.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d14f28b8c1de668bab863bf5892a49c824cb110d ]
In the next patches, the xfrm core code will be extended to support
new type of offload - packet offload. In that mode, both policy and state
should be specially configured in order to perform whole offloaded data
path.
Full offload takes care of encryption, decryption, encapsulation and
other operations with headers.
As this mode is new for XFRM policy flow, we can "start fresh" with flag
bits and release first and second bit for future use.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Stable-dep-of: 68de007d5ac9 ("xfrm: annotate data-races around xfrm_policy_count[] and xfrm_policy_default[]")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 765bde47fe7f197dabeb12da76831f40d0b20377 ]
xprt_rdma_alloc_slot() and xprt_rdma_free_slot() lack serialization
between the buffer pool and the backlog queue. A buffer freed
after rpcrdma_buffer_get() finds the pool empty but before
rpc_sleep_on() places the task on the backlog is returned to the
pool with no waiter to wake, leaving the task stuck on the backlog
indefinitely.
After joining the backlog, re-check the pool and route any
recovered buffer through xprt_wake_up_backlog(), whose queue lock
serializes with concurrent wakeups and avoids double-assignment
of slots.
Because xprt_rdma_free_slot() does not hold reserve_lock, the
XPRT_CONGESTED double-check in xprt_throttle_congested() is
ineffective: a task can join the backlog through that path after
free_slot has already found it empty and cleared the bit. Avoid
this by using xprt_add_backlog_noncongested(), which queues the
task without setting XPRT_CONGESTED, so every allocation reaches
xprt_rdma_alloc_slot() and its post-sleep re-check.
Fixes: edb41e61a54e ("xprtrdma: Make rpc_rqst part of rpcrdma_req")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: e786233d2e0b ("xprtrdma: Decouple req recycling from RPC completion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2821e85c058f81c9948a2fb1a634f7b47457d51c ]
rocker_router_fib_event() calls fib_rule_get() during RCU dump.
If the fib_rule is dying, refcount_inc() will complain about it.
Let's call refcount_inc_not_zero() in fib_rules_dump().
Fixes: 5d7bfd141924 ("ipv4: fib_rules: Dump FIB rules when registering FIB notifier")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260610061744.2030996-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c55dd3b46c1208d6d2ea737a8aefef4aa4c70cb8 ]
find_vm_area() can return NULL if the given address is not a valid vmalloc
area. Check the return value before dereferencing it to avoid a kernel
crash.
Link: https://lore.kernel.org/20260529014130.671291-1-hui.zhu@linux.dev
Fixes: 121e6f3258fe ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Hui Zhu <zhuhui@kylinos.cn>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46397622a3fa8372b8fda0f04b33d16923b03b1b ]
Starting from this commit, we add the basic support of UMP (Universal
MIDI Packet) events on ALSA sequencer infrastructure. The biggest
change here is that, for transferring UMP packets that are up to 128
bits, we extend the data payload of ALSA sequencer event record when
the client is declared to support for the new UMP events.
A new event flag bit, SNDRV_SEQ_EVENT_UMP, is defined and it shall be
set for the UMP packet events that have the larger payload of 128
bits, defined as struct snd_seq_ump_event.
For controlling the UMP feature enablement in kernel, a new Kconfig,
CONFIG_SND_SEQ_UMP is introduced. The extended event for UMP is
available only when this Kconfig item is set. Similarly, the size of
the internal snd_seq_event_cell also increases (in 4 bytes) when the
Kconfig item is set. (But the size increase is effective only for
32bit architectures; 64bit archs already have padding there.)
Overall, when CONFIG_SND_SEQ_UMP isn't set, there is no change in the
event and cell, keeping the old sizes.
For applications that want to access the UMP packets, first of all, a
sequencer client has to declare the user-protocol to match with the
latest one via the new SNDRV_SEQ_IOCTL_USER_PVERSION; otherwise it's
treated as if a legacy client without UMP support.
Then the client can switch to the new UMP mode (MIDI 1.0 or MIDI 2.0)
with a new field, midi_version, in snd_seq_client_info. When switched
to UMP mode (midi_version = 1 or 2), the client can write the UMP
events with SNDRV_SEQ_EVENT_UMP flag. For reads, the alignment size
is changed from snd_seq_event (28 bytes) to snd_seq_ump_event (32
bytes). When a UMP sequencer event is delivered to a legacy sequencer
client, it's ignored or handled as an error.
Conceptually, ALSA sequencer client and port correspond to the UMP
Endpoint and Group, respectively; each client may have multiple ports
and each port has the fixed number (16) of channels, total up to 256
channels.
As of this commit, ALSA sequencer core just sends and receives the UMP
events as-is from/to clients. The automatic conversions between the
legacy events and the new UMP events will be implemented in a later
patch.
Along with this commit, bump the sequencer protocol version to 1.0.3.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-26-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afb72505e4614a2ccefe3440d37dec3a2273c330 ]
For the future extension of ALSA sequencer ABI, introduce a new ioctl
SNDRV_SEQ_IOCTL_USER_PVERSION. This is similar like the ioctls used
in PCM and other interfaces, for an application to specify its
supporting ABI version.
The use of this ioctl will be mandatory for the upcoming UMP support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 786be2b05980a5828e67fc564ad7517e2adbe9bd ]
Since there're 4 bytes padding at the end of struct bpf_prog_info, they
won't be checked by bpf_check_uarg_tail_zero().
pahole -C bpf_prog_info ./vmlinux
struct bpf_prog_info {
...
__u32 attach_btf_obj_id; /* 220 4 */
__u32 attach_btf_id; /* 224 4 */
/* size: 232, cachelines: 4, members: 38 */
/* sum members: 224 */
/* sum bitfield members: 1 bits, bit holes: 1, sum bit holes: 31 bits */
/* padding: 4 */
/* forced alignments: 9 */
/* last cacheline: 40 bytes */
} __attribute__((__aligned__(8)));
If a future kernel extension adds a new 4-byte field, older userspace
programs allocating this structure on the stack might inadvertently pass
uninitialized stack garbage into the new field, permanently breaking
backward compatibility. -- sashiko [1]
Fix it by changing sizeof(info) to
offsetofend(struct bpf_prog_info, attach_btf_id).
And, add "__u32 :32" to the tail of struct bpf_prog_info.
[1] https://lore.kernel.org/bpf/20260513224823.6494FC19425@smtp.kernel.org/
Fixes: aba64c7da983 ("bpf: Add verified_insns to bpf_prog_info and fdinfo")
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260605155249.20772-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3cbf5e3c46e66d9b3b6b91099bb720c6cb1be3bc ]
When a buffer object is pinned via host1x_bo_pin() with a cache, the
resulting mapping is kept in the cache so it can be reused on subsequent
pins. Each mapping held a reference to the underlying host1x_bo (taken
in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached,
the bo itself could not be freed.
However, the only way to remove the cached mapping was through the free
path of the buffer object. This meant that if a bo got cached, it could
never get freed again.
Resolve the circularity by holding a weak reference to the bo from the
cache side. This is done by having the .pin callbacks not bump the bo's
refcount -- instead the common Host1x bo code does so, except for the
cache reference.
Also move the remove-cache-mapping-on-free code into a common function
inside Host1x code. This is only called from the TegraDRM GEM buffers
since those are the only ones that can be cached at the moment.
Reported-by: Aaron Kling <webgeek1234@gmail.com>
Fixes: 1f39b1dfa53c ("drm/tegra: Implement buffer object cache")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260515-host1x-bocache-leak-v1-1-a0375f68aeab@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 507541c2a8eeb76c02bd2511958f73a8cfa3e1bc ]
dev_get_by_index_rcu() could return NULL if the original physical
device is unregistered.
Found by Sashiko.
Fixes: e1ae5c2ea478 ("vrf: Increment Icmp6InMsgs on the original netdev")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260526145529.3587126-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9506871a8ea304cde48ff4a57226df2aadddae3 ]
dev_has_sync_state() reads dev->driver twice without holding
device_lock() -- once for the NULL check and once to dereference
->sync_state. Some callers only hold device_links_write_lock, which
doesn't prevent a concurrent unbind from clearing dev->driver via
device_unbind_cleanup().
Fix it by reading dev->driver exactly once with READ_ONCE(), pairing
with the WRITE_ONCE() in device_set_driver().
Link: https://lore.kernel.org/driver-core/DHW8QPU1VU1F.3P6PH69HLFBYC@kernel.org/
Fixes: ac338acf514e ("driver core: Add dev_has_sync_state()")
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Saravana Kannan <saravanak@kernel.org>
Link: https://patch.msgid.link/20260418162221.1121873-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6aa38ef0eab32df5409b72d62509de6ba09cea50 upstream.
Add MIPI PHY power domain for shared PHY resources used by both
MIPI DSI and CSI blocks.
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Fixes: e9aa77d413c9 ("soc: imx: add i.MX93 media blk ctrl driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a6070839b1ef276d5b05bedfb787743e140fb17 upstream.
String event fields are not necessarily NUL-terminated, so the filter
predicate functions (filter_pred_string(), filter_pred_strloc() and
filter_pred_strrelloc()) pass the field length to the regex match
callbacks, and the length-aware matchers honour it.
regex_match_glob() was the exception: it ignored the length and called
glob_match(), which scans the string until it hits a NUL byte. Some
string fields are not NUL-terminated. One example is the dynamic char
array of the xfs_* namespace tracepoints, which is copied without a
trailing NUL. For such a field, glob matching reads past the end of
the event field, causing a KASAN slab-out-of-bounds read in
glob_match(), reached via regex_match_glob() and filter_match_preds()
from the xfs_lookup tracepoint.
Add a length-bounded glob_match_len() and use it from regex_match_glob()
so glob matching always stops at the field boundary. The matching loop
is factored into a shared helper so glob_match() keeps its behaviour.
Fixes: 60f1d5e3bac4 ("ftrace: Support full glob matching")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/da1aaf125fc3b63320b0c540fd6afa7c3d5b4f1a.1782836943.git.hhhuang@smu.edu.sg
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f49f00c981bbb9ef602966f19bfdbef46b681d2 upstream.
On 64-bit kernels, drbg_max_addtl() returns 2**35 bytes. That's too
large, for two reasons:
1. SP800-90A says the maximum limit is 2**35 *bits*, not 2**35 bytes.
So the implemented limit has confused bits and bytes.
2. When drbg_kcapi_hash() calls crypto_shash_update() on the additional
information string, the length is implicitly cast to 'unsigned int'.
That truncates the additional information string to U32_MAX bytes.
Fix the maximum additional information string length to always be
U32_MAX - 1, causing an error to be returned for any longer lengths.
Fixes: 541af946fe13 ("crypto: drbg - SP800-90A Deterministic Random Bit Generator")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d86ff3333cb1d5f42d8898fb5fdb304e143c0237 ]
When writing EFI variables, one might get errors with no other message
on why it fails. Being able to see how much is used by EFI variables
helps analyzing such issues.
Since this is not a conventional filesystem, block size is intentionally
set to 1 instead of PAGE_SIZE.
x86 quirks of reserved size are taken into account; so that available
and free size can be different, further helping debugging space issues.
With this patch, one can see the remaining space in EFI variable storage
via efivarfs, like this:
$ df -h /sys/firmware/efi/efivars/
Filesystem Size Used Avail Use% Mounted on
efivarfs 176K 106K 66K 62% /sys/firmware/efi/efivars
Signed-off-by: Anisse Astier <an.astier@criteo.com>
[ardb: - rename efi_reserved_space() to efivar_reserved_space()
- whitespace/coding style tweaks]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Adjusted for headers in linux-6.1.y
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f784fcea450617055d2d12eec5b2f6e0e38bf878 upstream.
sensor_hub_input_attr_get_raw_value() is limited to returning a single
32-bit value, which is insufficient for sensors that report data larger
than 32 bits, such as a quaternion with four s16 elements.
Add sensor_hub_input_attr_read_values() that accepts a caller-provided
buffer and accumulates incoming data until the buffer is full. The two
paths are distinguished in sensor_hub_raw_event() by pending.max_raw_size
being non-zero, preserving backward compatibility.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Co-developed-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 983512f3a87fd8dc4c94dfa6b596b6e57df5aad7 upstream.
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared.
Link: https://lore.kernel.org/all/20260205145104.iWinkXHv@linutronix.de
Fixes: b245be1f4db1a ("net-timestamp: no-payload only sysctl")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260220183858.N4ERjFW6@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ adapted sk_set_socket() in include/net/sock.h to fix the conflict from
not having commit 5d6b58c932ec ("net: lockless sock_i_ino()") and the
additional previous changes required by it.
It comes down to just now having the lines of
if (sock) {
WRITE_ONCE(sk->sk_uid, SOCK_INODE(sock)->i_uid);
WRITE_ONCE(sk->sk_ino, SOCK_INODE(sock)->i_ino);
}
below the changed line. ]
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
