summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-01-10tcp: Export TCP functions and ops structMat Martineau1-0/+8
MPTCP will make use of tcp_send_mss() and tcp_push() when sending data to specific TCP subflows. tcp_request_sock_ipvX_ops and ipvX_specific will be referenced during TCP subflow creation. Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10tcp: coalesce/collapse must respect MPTCP extensionsMat Martineau2-0/+65
Coalesce and collapse of packets carrying MPTCP extensions is allowed when the newer packet has no extension or the extensions carried by both packets are equal. This allows merging of TSO packet trains and even cross-TSO packets, and does not require any additional action when moving data into existing SKBs. v3 -> v4: - allow collapsing, under mptcp_skb_can_collapse() constraint v5 -> v6: - clarify MPTCP skb extensions must always be cleared at allocation time Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10mptcp: Add MPTCP to skb extensionsMat Martineau2-0/+31
Add enum value for MPTCP and update config dependencies v5 -> v6: - fixed '__unused' field size Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10tcp, ulp: Add clone operation to tcp_ulp_opsMat Martineau1-0/+3
If ULP is used on a listening socket, icsk_ulp_ops and icsk_ulp_data are copied when the listener is cloned. Sometimes the clone is immediately deleted, which will invoke the release op on the clone and likely corrupt the listening socket's icsk_ulp_data. The clone operation is invoked immediately after the clone is copied and gives the ULP type an opportunity to set up the clone socket and its icsk_ulp_data. The MPTCP ULP clone will silently fallback to plain TCP on allocation failure, so 'clone()' does not need to return an error code. v6 -> v7: - move and rename ulp clone helper to make it inline-friendly v5 -> v6: - clarified MPTCP clone usage in commit message Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10tcp: Add MPTCP option numberMat Martineau1-0/+1
TCP option 30 is allocated for MPTCP by the IANA. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10tcp: Define IPPROTO_MPTCPMat Martineau2-1/+4
To open a MPTCP socket with socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP), IPPROTO_MPTCP needs a value that differs from IPPROTO_TCP. The existing IPPROTO numbers mostly map directly to IANA-specified protocol numbers. MPTCP does not have a protocol number allocated because MPTCP packets use the TCP protocol number. Use private number not used OTA. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10sock: Make sk_protocol a 16-bit valueMat Martineau2-21/+6
Match the 16-bit width of skbuff->protocol. Fills an 8-bit hole so sizeof(struct sock) does not change. Also take care of BPF field access for sk_type/sk_protocol. Both of them are now outside the bitfield, so we can use load instructions without further shifting/masking. v5 -> v6: - update eBPF accessors, too (Intel's kbuild test robot) v2 -> v3: - keep 'sk_type' 2 bytes aligned (Eric) v1 -> v2: - preserve sk_pacing_shift as bit field (Eric) Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: bpf@vger.kernel.org Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: Make sock protocol value checks more specificMat Martineau1-1/+0
SK_PROTOCOL_MAX is only used in two places, for DECNet and AX.25. The limits have more to do with the those protocol definitions than they do with the data type of sk_protocol, so remove SK_PROTOCOL_MAX and use U8_MAX directly. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller12-23/+78
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds4-1/+49
Pull networking fixes from David Miller: 1) Missing netns pointer init in arp_tables, from Florian Westphal. 2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang. 3) Fix divide by zero in sch_cake, from Wen Yang. 4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl Huang. 5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long. 6) cgroup bpf programs can be released out of order, fix from Roman Gushchin. 7) Make sure stmmac debugfs entry name is changed when device name changes, from Jiping Ma. 8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric Dumazet. 9) SKB leak in lan78xx usb driver, also from Eric Dumazet. 10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq packet scheduler, reject them. From Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) tipc: fix wrong connect() return code tipc: fix link overflow issue at socket shutdown netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present netfilter: conntrack: dccp, sctp: handle null timeout argument atm: eni: fix uninitialized variable warning macvlan: do not assume mac_header is set in macvlan_broadcast() net: sch_prio: When ungrafting, replace with FIFO mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos gtp: fix bad unlock balance in gtp_encap_enable_socket pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM tipc: remove meaningless assignment in Makefile tipc: do not add socket.o to tipc-y twice net: stmmac: dwmac-sun8i: Allow all RGMII modes net: stmmac: dwmac-sunxi: Allow all RGMII modes net: usb: lan78xx: fix possible skb leak net: stmmac: Fixed link does not need MDIO Bus vlan: vlan_changelink() should propagate errors vlan: fix memory leak in vlan_dev_set_egress_priority stmmac: debugfs entry name is not be changed when udev rename device name. ...
2020-01-09net: dsa: Get information about stacked DSA protocolFlorian Fainelli1-1/+2
It is possible to stack multiple DSA switches in a way that they are not part of the tree (disjoint) but the DSA master of a switch is a DSA slave of another. When that happens switch drivers may have to know this is the case so as to determine whether their tagging protocol has a remove chance of working. This is useful for specific switch drivers such as b53 where devices have been known to be stacked in the wild without the Broadcom tag protocol supporting that feature. This allows b53 to continue supporting those devices by forcing the disabling of Broadcom tags on the outermost switches if necessary. The get_tag_protocol() function is therefore updated to gain an additional enum dsa_tag_protocol argument which denotes the current tagging protocol used by the DSA master we are attached to, else DSA_TAG_PROTO_NONE for the top of the dsa_switch_tree. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09devlink: add support for reporter recovery completionVikas Gupta1-0/+2
It is possible that a reporter recovery completion do not finish successfully when recovery is triggered via devlink_health_reporter_recover as recovery could be processed in different context. In such scenario an error is returned by driver when recover hook is invoked and successful recovery completion is intimated later. Expose devlink recover done API to update recovery stats. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller1-0/+6
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Missing netns context in arp_tables, from Florian Westphal. 2) Underflow in flowtable reference counter, from wenxu. 3) Fix incorrect ethernet destination address in flowtable offload, from wenxu. 4) Check for status of neighbour entry, from wenxu. 5) Fix NAT port mangling, from wenxu. 6) Unbind callbacks from destroy path to cleanup hardware properly on flowtable removal. 7) Fix missing casting statistics timestamp, add nf_flowtable_time_stamp and use it. 8) NULL pointer exception when timeout argument is null in conntrack dccp and sctp protocol helpers, from Florian Westphal. 9) Possible nul-dereference in ipset with IPSET_ATTR_LINENO, also from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09net: introduce skb_list_walk_safe for skb segment walkingJason A. Donenfeld1-0/+5
As part of the continual effort to remove direct usage of skb->next and skb->prev, this patch adds a helper for iterating through the singly-linked variant of skb lists, which are used for lists of GSO packet. The name "skb_list_..." has been chosen to match the existing function, "kfree_skb_list, which also operates on these singly-linked lists, and the "..._walk_safe" part is the same idiom as elsewhere in the kernel. This patch removes the helper from wireguard and puts it into linux/skbuff.h, while making it a bit more robust for general usage. In particular, parenthesis are added around the macro argument usage, and it now accounts for trying to iterate through an already-null skb pointer, which will simply run the iteration zero times. This latter enhancement means it can be used to replace both do { ... } while and while (...) open-coded idioms. This should take care of these three possible usages, which match all current methods of iterations. skb_list_walk_safe(segs, skb, next) { ... } skb_list_walk_safe(skb, skb, next) { ... } skb_list_walk_safe(segs, skb, segs) { ... } Gcc appears to generate efficient code for each of these. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08macvlan: do not assume mac_header is set in macvlan_broadcast()Eric Dumazet1-0/+8
Use of eth_hdr() in tx path is error prone. Many drivers call skb_reset_mac_header() before using it, but others do not. Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") attempted to fix this generically, but commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option") brought back the macvlan bug. Lets add a new helper, so that tx paths no longer have to call skb_reset_mac_header() only to get a pointer to skb->data. Hopefully we will be able to revert 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") and save few cycles in transmit fast path. BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline] BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579 CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] mc_hash drivers/net/macvlan.c:251 [inline] macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline] macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559 __netdev_start_xmit include/linux/netdevice.h:4447 [inline] netdev_start_xmit include/linux/netdevice.h:4461 [inline] dev_direct_xmit+0x419/0x630 net/core/dev.c:4079 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240 packet_snd net/packet/af_packet.c:2966 [inline] packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 __sys_sendto+0x262/0x380 net/socket.c:1985 __do_sys_sendto net/socket.c:1997 [inline] __se_sys_sendto net/socket.c:1993 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x442639 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639 RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x163/0x770 mm/slab.c:3665 kmalloc include/linux/slab.h:561 [inline] tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a4932000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1025 bytes inside of 4096-byte region [ffff8880a4932000, ffff8880a4933000) The buggy address belongs to the page: page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000 raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: b863ceb7ddce ("[NET]: Add macvlan driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-07net/mlx5: limit the function in local scopeZhu Yanjun1-2/+0
The function mlx5_buf_alloc_node is only used by the function in the local scope. So it is appropriate to limit this function in the local scope. Signed-off-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-07Merge tag 'trace-v5.5-rc5' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Various tracing fixes: - kbuild found missing define of MCOUNT_INSN_SIZE for various build configs - Initialize variable to zero as gcc thinks it is used undefined (it really isn't but the code is subtle enough that this doesn't hurt) - Convert from do_div() to div64_ull() to prevent potential divide by zero - Unregister a trace point on error path in sched_wakeup tracer - Use signed offset for archs that can have stext not be first - A simple indentation fix (whitespace error)" * tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix indentation issue kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail tracing: Change offset type to s32 in preempt/irq tracepoints ftrace: Avoid potential division by zero in function profiler tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined tracing: Define MCOUNT_INSN_SIZE when not defined without direct calls tracing: Initialize val to zero in parse_entry of inject code
2020-01-07net: ethernet: sxgbe: Rename Samsung to lowercaseKrzysztof Kozlowski1-1/+1
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06Merge tag 'spi-fix-v5.5-rc5' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of fixes here, one to make the newly added PTP timestamping code more accurate, a few driver fixes and a fix for the core DT binding to document the fact that we support eight wire buses" * tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Document Octal mode as valid SPI bus width spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode spi: Don't look at TX buffer for PTP system timestamping spi: uniphier: Fix FIFO threshold
2020-01-06Merge tag 'rtc-5.5-2' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "A few fixes for this cycle. The CMOS AltCentury support broke a few platforms with a recent BIOS so I reverted it. The mt6397 fix is not that critical but good to have. And finally, the sun6i fix repairs WiFi and BT on a few platforms. Summary: - cmos: revert AltCentury support on AMD/Hygon - mt6397: fix alarm register overwrite - sun6i: ensure clock is working on R40" * tag 'rtc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: cmos: Revert "rtc: Fix the AltCentury value on AMD/Hygon platform" rtc: mt6397: fix alarm register overwrite rtc: sun6i: Add support for RTC clocks on R40
2020-01-06netfilter: flowtable: add nf_flowtable_time_stampPablo Neira Ayuso1-0/+6
This patch adds nf_flowtable_time_stamp and updates the existing code to use it. This patch is also implicitly fixing up hardware statistic fetching via nf_flow_offload_stats() where casting to u32 is missing. Use nf_flow_timeout_delta() to fix this. Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: wenxu <wenxu@ucloud.cn>
2020-01-06net: mscc: ocelot: export ANA, DEV and QSYS registers to include/soc/msccVladimir Oltean3-0/+1170
Since the Felix DSA driver is implementing its own PHYLINK instance due to SoC differences, it needs access to the few registers that are common, mainly for flow control. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: mscc: ocelot: make phy_mode a member of the common struct ocelot_portVladimir Oltean1-0/+2
The Ocelot switchdev driver and the Felix DSA one need it for different reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is integrated with the traditional NXP Layerscape PCS design which does not support runtime configuration of SerDes protocol. So it needs to pre-validate the phy-mode from the device tree and prevent PHYLINK from attempting to change it. For this, it needs to cache it in a private variable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06enetc: Make MDIO accessors more generic and export to include/linux/fslClaudiu Manoil1-0/+55
Within the LS1028A SoC, the register map for the ENETC MDIO controller is instantiated a few times: for the central (external) MDIO controller, for the internal bus of each standalone ENETC port, and for the internal bus of the Felix switch. Refactoring is needed to support multiple MDIO buses from multiple drivers. The enetc_hw structure is made an opaque type and a smaller enetc_mdio_priv is created. 'mdio_base' - MDIO registers base address - is being parameterized, to be able to work with different MDIO register bases. The ENETC MDIO bus operations are exported from the fsl-enetc-mdio kernel object, the same that registers the central MDIO controller (the dedicated PF). The ENETC main driver has been changed to select it, and use its exported helpers to further register its private MDIO bus. The DSA Felix driver will do the same. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: dsa: Pass pcs_poll flag from driver to PHYLINKVladimir Oltean1-0/+5
The DSA drivers that implement .phylink_mac_link_state should normally register an interrupt for the PCS, from which they should call phylink_mac_change(). However not all switches implement this, and those who don't should set this flag in dsa_switch in the .setup callback, so that PHYLINK will poll for a few ms until the in-band AN link timer expires and the PCS state settles. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: phylink: add support for polling MAC PCSVladimir Oltean1-0/+2
Some MAC PCS blocks are unable to provide interrupts when their status changes. As we already have support in phylink for polling status, use this to provide a hook for MACs to enable polling mode. The patch idea was picked up from Russell King's suggestion on the macb phylink patch thread here [0] but the implementation was changed. Instead of introducing a new phylink_start_poll() function, which would make the implementation cumbersome for common PHYLINK implementations for multiple types of devices, like DSA, just add a boolean property to the phylink_config structure, which is just as backwards-compatible. https://lkml.org/lkml/2019/12/16/603 Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06mii: Add helpers for parsing SGMII auto-negotiationVladimir Oltean2-0/+62
Typically a MAC PCS auto-configures itself after it receives the negotiated copper-side link settings from the PHY, but some MAC devices are more special and need manual interpretation of the SGMII AN result. In other cases, the PCS exposes the entire tx_config_reg base page as it is transmitted on the wire during auto-negotiation, so it makes sense to be able to decode the equivalent lp_advertised bit mask from the raw u16 (of course, "lp" considering the PCS to be the local PHY). Therefore, add the bit definitions for the SGMII registers 4 and 5 (local device ability, link partner ability), as well as a link_mode conversion helper that can be used to feed the AN results into phy_resolve_aneg_linkmode. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: dsa: Make deferred_xmit private to sja1105Vladimir Oltean2-9/+3
There are 3 things that are wrong with the DSA deferred xmit mechanism: 1. Its introduction has made the DSA hotpath ever so slightly more inefficient for everybody, since DSA_SKB_CB(skb)->deferred_xmit needs to be initialized to false for every transmitted frame, in order to figure out whether the driver requested deferral or not (a very rare occasion, rare even for the only driver that does use this mechanism: sja1105). That was necessary to avoid kfree_skb from freeing the skb. 2. Because L2 PTP is a link-local protocol like STP, it requires management routes and deferred xmit with this switch. But as opposed to STP, the deferred work mechanism needs to schedule the packet rather quickly for the TX timstamp to be collected in time and sent to user space. But there is no provision for controlling the scheduling priority of this deferred xmit workqueue. Too bad this is a rather specific requirement for a feature that nobody else uses (more below). 3. Perhaps most importantly, it makes the DSA core adhere a bit too much to the NXP company-wide policy "Innovate Where It Doesn't Matter". The sja1105 is probably the only DSA switch that requires some frames sent from the CPU to be routed to the slave port via an out-of-band configuration (register write) rather than in-band (DSA tag). And there are indeed very good reasons to not want to do that: if that out-of-band register is at the other end of a slow bus such as SPI, then you limit that Ethernet flow's throughput to effectively the throughput of the SPI bus. So hardware vendors should definitely not be encouraged to design this way. We do _not_ want more widespread use of this mechanism. Luckily we have a solution for each of the 3 issues: For 1, we can just remove that variable in the skb->cb and counteract the effect of kfree_skb with skb_get, much to the same effect. The advantage, of course, being that anybody who doesn't use deferred xmit doesn't need to do any extra operation in the hotpath. For 2, we can create a kernel thread for each port's deferred xmit work. If the user switch ports are named swp0, swp1, swp2, the kernel threads will be named swp0_xmit, swp1_xmit, swp2_xmit (there appears to be a 15 character length limit on kernel thread names). With this, the user can change the scheduling priority with chrt $(pidof swp2_xmit). For 3, we can actually move the entire implementation to the sja1105 driver. So this patch deletes the generic implementation from the DSA core and adds a new one, more adequate to the requirements of PTP TX timestamping, in sja1105_main.c. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: dsa: sja1105: Always send through management routes in slot 0Vladimir Oltean1-1/+0
I finally found out how the 4 management route slots are supposed to be used, but.. it's not worth it. The description from the comment I've just deleted in this commit is still true: when more than 1 management slot is active at the same time, the switch will match frames incoming [from the CPU port] on the lowest numbered management slot that matches the frame's DMAC. My issue was that one was not supposed to statically assign each port a slot. Yes, there are 4 slots and also 4 non-CPU ports, but that is a mere coincidence. Instead, the switch can be used like this: every management frame gets a slot at the right of the most recently assigned slot: Send mgmt frame 1 through S0: S0 x x x Send mgmt frame 2 through S1: S0 S1 x x Send mgmt frame 3 through S2: S0 S1 S2 x Send mgmt frame 4 through S3: S0 S1 S2 S3 The difference compared to the old usage is that the transmission of frames 1-4 doesn't need to wait until the completion of the management route. It is safe to use a slot to the right of the most recently used one, because by protocol nobody will program a slot to your left and "steal" your route towards the correct egress port. So there is a potential throughput benefit here. But mgmt frame 5 has no more free slot to use, so it has to wait until _all_ of S0, S1, S2, S3 are full, in order to use S0 again. And that's actually exactly the problem: I was looking for something that would bring more predictable transmission latency, but this is exactly the opposite: 3 out of 4 frames would be transmitted quicker, but the 4th would draw the short straw and have a worse worst-case latency than before. Useless. Things are made even worse by PTP TX timestamping, which is something I won't go deeply into here. Suffice to say that the fact there is a driver-level lock on the SPI bus offsets any potential throughput gains that parallelism might bring. So there's no going back to the multi-slot scheme, remove the "mgmt_slot" variable from sja1105_port and the dummy static assignment made at probe time. While passing by, also remove the assignment to casc_port altogether. Don't pretend that we support cascaded setups. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: phy: add PHY_INTERFACE_MODE_10GBASERRussell King1-4/+8
Recent discussion has revealed that the use of PHY_INTERFACE_MODE_10GKR is incorrect. Add a 10GBASE-R definition, document both the -R and -KR versions, and the fact that 10GKR was used incorrectly. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: ethernet: sxgbe: Rename Samsung to lowercaseKrzysztof Kozlowski1-1/+1
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05kcov: fix struct layout for kcov_remote_argAndrey Konovalov1-5/+5
Make the layout of kcov_remote_arg the same for 32-bit and 64-bit code. This makes it more convenient to write userspace apps that can be compiled into 32-bit or 64-bit binaries and still work with the same 64-bit kernel. Also use proper __u32 types in uapi headers instead of unsigned ints. Link: http://lkml.kernel.org/r/9e91020876029cfefc9211ff747685eba9536426.1575638983.git.andreyknvl@google.com Fixes: eec028c9386ed1a ("kcov: remote coverage support") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Marco Elver <elver@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@kernel.org> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: "Jacky . Cao @ sony . com" <Jacky.Cao@sony.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-05mm/memory_hotplug: shrink zones when offlining memoryDavid Hildenbrand1-2/+5
We currently try to shrink a single zone when removing memory. We use the zone of the first page of the memory we are removing. If that memmap was never initialized (e.g., memory was never onlined), we will read garbage and can trigger kernel BUGs (due to a stale pointer): BUG: unable to handle page fault for address: 000000000000353d #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:clear_zone_contiguous+0x5/0x10 Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __remove_pages+0x4b/0x640 arch_remove_memory+0x63/0x8d try_remove_memory+0xdb/0x130 __remove_memory+0xa/0x11 acpi_memory_device_remove+0x70/0x100 acpi_bus_trim+0x55/0x90 acpi_device_hotplug+0x227/0x3a0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x221/0x550 worker_thread+0x50/0x3b0 kthread+0x105/0x140 ret_from_fork+0x3a/0x50 Modules linked in: CR2: 000000000000353d Instead, shrink the zones when offlining memory or when onlining failed. Introduce and use remove_pfn_range_from_zone(() for that. We now properly shrink the zones, even if we have DIMMs whereby - Some memory blocks fall into no zone (never onlined) - Some memory blocks fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Drop the zone parameter (with a potential dubious value) from __remove_pages() and __remove_section(). Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-04Merge tag 'dmaengine-fix-5.5-rc5' of ↵Linus Torvalds1-1/+4
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "A bunch of fixes for: - uninitialized dma_slave_caps access - virt-dma use after free in vchan_complete() - driver fixes for ioat, k3dma and jz4780" * tag 'dmaengine-fix-5.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma: ioat: ioat_alloc_ring() failure handling. dmaengine: virt-dma: Fix access after free in vchan_complete() dmaengine: k3dma: Avoid null pointer traversal dmaengine: dma-jz4780: Also break descriptor chains on JZ4725B dmaengine: Fix access to uninitialized dma_slave_caps
2020-01-03net: remove the check argument from __skb_gro_checksum_convertLi RongQing1-3/+3
The argument is always ignored, so remove it. Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03Merge tag 'block-5.5-20200103' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull block fixes from Jens Axboe: "Three fixes in here: - Fix for a missing split on default memory boundary mask (4G) (Ming) - Fix for multi-page read bio truncate (Ming) - Fix for null_blk zone close request handling (Damien)" * tag 'block-5.5-20200103' of git://git.kernel.dk/linux-block: null_blk: Fix REQ_OP_ZONE_CLOSE handling block: fix splitting segments on boundary masks block: add bio_truncate to fix guard_bio_eod
2020-01-03tracing: Change offset type to s32 in preempt/irq tracepointsJoel Fernandes (Google)1-4/+4
Discussion in the below link reported that symbols in modules can appear to be before _stext on ARM architecture, causing wrapping with the offsets of this tracepoint. Change the offset type to s32 to fix this. Link: http://lore.kernel.org/r/20191127154428.191095-1-antonio.borneo@st.com Link: http://lkml.kernel.org/r/20200102194625.226436-1-joel@joelfernandes.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David Sterba <dsterba@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Antonio Borneo <antonio.borneo@st.com> Cc: stable@vger.kernel.org Fixes: d59158162e032 ("tracing: Add support for preempt and irq enable/disable events") Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-03Merge tag 'sizeof_field-v5.5-rc5' of ↵Linus Torvalds1-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull final sizeof_field conversion from Kees Cook: "Remove now unused FIELD_SIZEOF() macro (Kees Cook)" * tag 'sizeof_field-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kernel.h: Remove unused FIELD_SIZEOF()
2020-01-03Revert "fs: remove ksys_dup()"Dominik Brodowski1-0/+1
This reverts commit 8243186f0cc7 ("fs: remove ksys_dup()") and the subsequent fix for it in commit 2d3145f8d280 ("early init: fix error handling when opening /dev/console"). Trying to use filp_open() and f_dupfd() instead of pseudo-syscalls caused more trouble than what is worth it: it requires accessing vfs internals and it turns out there were other bugs in it too. In particular, the file reference counting was wrong - because unlike the original "open+2*dup" sequence it used "filp_open+3*f_dupfd" and thus had an extra leaked file reference. That in turn then caused odd problems with Androidx86 long after boot becaue of how the extra reference to the console kept the session active even after all file descriptors had been closed. Reported-by: youling 257 <youling257@gmail.com> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-03net: Add device index to tcp_md5sigDavid Ahern1-2/+3
Add support for userspace to specify a device index to limit the scope of an entry via the TCP_MD5SIG_EXT setsockopt. The existing __tcpm_pad is renamed to tcpm_ifindex and the new field is only checked if the new TCP_MD5SIG_FLAG_IFINDEX is set in tcpm_flags. For now, the device index must point to an L3 master device (e.g., VRF). The API and error handling are setup to allow the constraint to be relaxed in the future to any device index. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03tcp: Add l3index to tcp_md5sig_key and md5 functionsDavid Ahern1-12/+12
Add l3index to tcp_md5sig_key to represent the L3 domain of a key, and add l3index to tcp_md5_do_add and tcp_md5_do_del to fill in the key. With the key now based on an l3index, add the new parameter to the lookup functions and consider the l3index when looking for a match. The l3index comes from the skb when processing ingress packets leveraging the helpers created for socket lookups, tcp_v4_sdif and inet_iif (and the v6 variants). When the sdif index is set it means the packet ingressed a device that is part of an L3 domain and inet_iif points to the VRF device. For egress, the L3 domain is determined from the socket binding and sk_bound_dev_if. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02can: can_dropped_invalid_skb(): ensure an initialized headroom in outgoing ↵Oliver Hartkopp1-0/+34
CAN sk_buffs KMSAN sysbot detected a read access to an untinitialized value in the headroom of an outgoing CAN related sk_buff. When using CAN sockets this area is filled appropriately - but when using a packet socket this initialization is missing. The problematic read access occurs in the CAN receive path which can only be triggered when the sk_buff is sent through a (virtual) CAN interface. So we check in the sending path whether we need to perform the missing initializations. Fixes: d3b58c47d330d ("can: replace timestamp as unique skb attribute") Reported-by: syzbot+b02ff0707a97e4e79ebb@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> # >= v4.1 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller7-12/+33
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds5-12/+30
Pull networking fixes from David Miller: 1) Fix big endian overflow in nf_flow_table, from Arnd Bergmann. 2) Fix port selection on big endian in nft_tproxy, from Phil Sutter. 3) Fix precision tracking for unbound scalars in bpf verifier, from Daniel Borkmann. 4) Fix integer overflow in socket rcvbuf check in UDP, from Antonio Messina. 5) Do not perform a neigh confirmation during a pmtu update over a tunnel, from Hangbin Liu. 6) Fix DMA mapping leak in dpaa_eth driver, from Madalin Bucur. 7) Various PTP fixes for sja1105 dsa driver, from Vladimir Oltean. 8) Add missing to dummy definition of of_mdiobus_child_is_phy(), from Geert Uytterhoeven * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename() net/sched: add delete_empty() to filters and use it in cls_flower tcp: Fix highest_sack and highest_sack_seq ptp: fix the race between the release of ptp_clock and cdev net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S Documentation: net: dsa: sja1105: Remove text about taprio base-time limitation net: dsa: sja1105: Remove restriction of zero base-time for taprio offload net: dsa: sja1105: Really make the PTP command read-write net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slot cxgb4/cxgb4vf: fix flow control display for auto negotiation mlxsw: spectrum: Use dedicated policer for VRRP packets mlxsw: spectrum_router: Skip loopback RIFs during MAC validation net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device net_sched: sch_fq: properly set sk->sk_pacing_status bnx2x: Fix accounting of vlan resources among the PFs bnx2x: Use appropriate define for vlan credit of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy net: phy: aquantia: add suspend / resume ops for AQR105 dpaa_eth: fix DMA mapping leak ...
2019-12-31net/sched: add delete_empty() to filters and use it in cls_flowerDavide Caratti1-0/+5
Revert "net/sched: cls_u32: fix refcount leak in the error path of u32_change()", and fix the u32 refcount leak in a more generic way that preserves the semantic of rule dumping. On tc filters that don't support lockless insertion/removal, there is no need to guard against concurrent insertion when a removal is in progress. Therefore, for most of them we can avoid a full walk() when deleting, and just decrease the refcount, like it was done on older Linux kernels. This fixes situations where walk() was wrongly detecting a non-empty filter, like it happened with cls_u32 in the error path of change(), thus leading to failures in the following tdc selftests: 6aa7: (filter, u32) Add/Replace u32 with source match and invalid indev 6658: (filter, u32) Add/Replace u32 with custom hash table and invalid handle 74c2: (filter, u32) Add/Replace u32 filter with invalid hash table id On cls_flower, and on (future) lockless filters, this check is necessary: move all the check_empty() logic in a callback so that each filter can have its own implementation. For cls_flower, it's sufficient to check if no IDRs have been allocated. This reverts commit 275c44aa194b7159d1191817b20e076f55f0e620. Changes since v1: - document the need for delete_empty() when TCF_PROTO_OPS_DOIT_UNLOCKED is used, thanks to Vlad Buslov - implement delete_empty() without doing fl_walk(), thanks to Vlad Buslov - squash revert and new fix in a single patch, to be nice with bisect tests that run tdc on u32 filter, thanks to Dave Miller Fixes: 275c44aa194b ("net/sched: cls_u32: fix refcount leak in the error path of u32_change()") Fixes: 6676d5e416ee ("net: sched: set dedicated tcf_walker flag when tp is empty") Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Suggested-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Tested-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31net: dsa: sja1105: Use PTP core's dedicated kernel thread for RX timestampingVladimir Oltean1-2/+0
And move the queue of skb's waiting for RX timestamps into the ptp_data structure, since it isn't needed if PTP is not compiled. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31ptp: introduce ptp_cancel_worker_syncVladimir Oltean1-0/+9
In order to effectively use the PTP kernel thread for tasks such as timestamping packets, allow the user control over stopping it, which is needed e.g. when the timestamping queues must be drained. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31ptp: fix the race between the release of ptp_clock and cdevVladis Dronov1-8/+11
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u Analyzed-by: Stephen Johnston <sjohnsto@redhat.com> Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller2-0/+5
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Remove #ifdef pollution around nf_ingress(), from Lukas Wunner. 2) Document ingress hook in netdevice, also from Lukas. 3) Remove htons() in tunnel metadata port netlink attributes, from Xin Long. 4) Missing erspan netlink attribute validation also from Xin Long. 5) Missing erspan version in tunnel, from Xin Long. 6) Missing attribute nest in NFTA_TUNNEL_KEY_OPTS_{VXLAN,ERSPAN} Patch from Xin Long. 7) Missing nla_nest_cancel() in tunnel netlink dump path, from Xin Long. 8) Remove two exported conntrack symbols with no clients, from Florian Westphal. 9) Add nft_meta_get_eval_time() helper to nft_meta, from Florian. 10) Add nft_meta_pkttype helper for loopback, also from Florian. 11) Add nft_meta_socket uid helper, from Florian Westphal. 12) Add nft_meta_cgroup helper, from Florian. 13) Add nft_meta_ifkind helper, from Florian. 14) Group all interface related meta selector, from Florian. 15) Add nft_prandom_u32() helper, from Florian. 16) Add nft_meta_rtclassid helper, from Florian. 17) Add support for matching on the slave device index, from Florian. This batch, among other things, contains updates for the netfilter tunnel netlink interface: This extension is still incomplete and lacking proper userspace support which is actually my fault, I did not find the time to go back and finish this. This update is breaking tunnel UAPI in some aspects to fix it but do it better sooner than never. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30kernel.h: Remove unused FIELD_SIZEOF()Kees Cook1-9/+0
Now that all callers of FIELD_SIZEOF() have been converted to sizeof_field(), remove the unused prior macro. Signed-off-by: Kees Cook <keescook@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-25 03:37:07 +0300