| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 3942bb49728ad9e1f94d953a88af169a8f5d8099 ]
Almost two thirds of the memchr_inv() usages check if the memory area is
all zeros, with no interest in where in the buffer the first non-zero
byte is located. Checking for !memchr_inv(s, 0, n) is also not very
intuitive or discoverable. Add an explicit mem_is_zero() helper for this
use case.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240814100035.3100852-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Stable-dep-of: 3e6ccd790ed6 ("gpio: cdev: check if uAPI v2 config attributes are correctly zeroed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c73370c677646e86fc4b1780fb07027bdf847375 ]
The trace event btrfs_sync_file() is called in an atomic context (all trace
events are) and its call to dput(), which is needed due to the call to
dget_parent(), can sleep, triggering a kernel splat.
This can be reproduced by enabling the trace event and running btrfs/056
from fstests for example. The splat shown in dmesg is the following:
[53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970
[53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io
[53.988] preempt_count: 2, expected: 0
[53.967] RCU nest depth: 0, expected: 0
[53.943] Preemption disabled at:
[53.944] [<0000000000000000>] 0x0
[54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full)
[54.070] Tainted: [W]=WARN
[54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[54.072] Call Trace:
[54.074] <TASK>
[54.076] dump_stack_lvl+0x56/0x80
[54.079] __might_resched.cold+0xd6/0x10f
[54.072] dput.part.0+0x24/0x110
[54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs]
[54.089] btrfs_sync_file+0x1ed/0x530 [btrfs]
[54.087] ? __handle_mm_fault+0x8ae/0xed0
[54.089] btrfs_do_write_iter+0x172/0x210 [btrfs]
[54.091] vfs_write+0x21f/0x450
[54.094] __x64_sys_pwrite64+0x8d/0xc0
[54.096] ? do_user_addr_fault+0x20c/0x670
[54.099] do_syscall_64+0x60/0xf20
[54.092] ? clear_bhb_loop+0x60/0xb0
[54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e
So stop using dget_parent() and dput() and access the parent dentry
directly as dentry->d_parent. This is also what ext4 is doing in
its equivalent trace event ext4_sync_file_enter().
Fixes: a85b46db143f ("btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc47e86dbfb75a864c0c9dd8e78affb6506296bb ]
At the moment ip6_dst_lookup_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel6_dst_lookup() and move it to file
net/ipv6/ip6_udp_tunnel.c.
This is similar to what already done for IPv4 in commit bf3fcbf7e7a0
("ipv4: rename and move ip_route_output_tunnel()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 72fc68c6356b663a8763f02d9b0ec773d59a4949 ]
We want to make the function more generic so that it can be used by
other UDP tunnel implementations such as geneve and vxlan. To do that,
add the following arguments:
- source and destination UDP port;
- ifindex of the output interface, needed by vxlan;
- the tos, because in some cases it is not taken from struct
ip_tunnel_info (for example, when it's inherited from the inner
packet);
- the dst cache, because not all tunnel types (e.g. vxlan) want to
use the one from struct ip_tunnel_info.
With these parameters, the function no longer needs the full struct
ip_tunnel_info as argument and we can pass only the relevant part of
it (struct ip_tunnel_key).
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78f3655adcb52412275f282267ee771421731632 ]
The function is now UDP-specific, the protocol is always IPPROTO_UDP.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf3fcbf7e7a08015d3b169bad6281b29d45c272d ]
At the moment ip_route_output_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel_dst_lookup() and move it to file
net/ipv4/udp_tunnel_core.c.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0898a817621a2f0cddca8122d9b974003fe5036d ]
The cdrom core never calls set_disk_ro() for a registered device, so
BLKROGET on a CD-ROM device always returns 0 (writable), even when the
drive has no write capabilities and writes will inevitably fail. This
causes problems for userspace that relies on BLKROGET to determine
whether a block device is read-only. For example, systemd's loop device
setup uses BLKROGET to decide whether to create a loop device with
LO_FLAGS_READ_ONLY. Without the read-only flag, writes pass through the
loop device to the CD-ROM and fail with I/O errors. systemd-fsck
similarly checks BLKROGET to decide whether to run fsck in no-repair
mode (-n).
The write-capability bits in cdi->mask come from two different sources:
CDC_DVD_RAM and CDC_CD_RW are populated by the driver from the MODE
SENSE capabilities page (page 0x2A) before register_cdrom() is called,
while CDC_MRW_W and CDC_RAM require the MMC GET CONFIGURATION command
and were only probed by cdrom_open_write() at device open time. This
meant that any attempt to compute the writable state from the full
mask at probe time was incorrect, because the GET CONFIGURATION bits
were still unset (and cdi->mask is initialized such that capabilities
are assumed present).
Fix this by factoring the GET CONFIGURATION probing out of
cdrom_open_write() into a new exported helper,
cdrom_probe_write_features(), and having sr call it from sr_probe()
right after get_capabilities() has populated the MODE SENSE bits.
register_cdrom() then calls set_disk_ro() based on the full
write-capability mask (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)
so the block layer reflects the drive's actual write support. The
feature queries used (CDF_MRW and CDF_RWRT via GET CONFIGURATION with
RT=00) report drive-level capabilities that are persistent across
media, so a single probe before register_cdrom() is sufficient and the
redundant probe at open time is dropped.
With set_disk_ro() now accurate, the long-vestigial cd->writeable flag
in sr can go: get_capabilities() used to set cd->writeable based on
the same four mask bits, but because CDC_MRW_W and CDC_RAM default to
"capability present" in cdi->mask and aren't touched by MODE SENSE,
the condition that gated cd->writeable was always true, making it
unconditionally 1. Replace the corresponding gate in sr_init_command()
with get_disk_ro(cd->disk), which turns a previously no-op check into
a real one and also catches kernel-internal bio writers that bypass
blkdev_write_iter()'s bdev_read_only() check.
The sd driver (SCSI disks) does not have this problem because it
checks the MODE SENSE Write Protect bit and calls set_disk_ro()
accordingly. The sr driver cannot use the same approach because the
MMC specification does not define the WP bit in the MODE SENSE
device-specific parameter byte for CD-ROM devices.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Daan De Meyer <daan@amutable.com>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://patch.msgid.link/20260427210139.1400-2-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ae41220ef5831674f446baef19bfe1b31358260 ]
Introduce a bitfield to allow the drivers to announce the available
features for an RTC.
The main use case would be to better handle alarms, that could be present
or not or have a minute resolution or may need a correct week day to be set.
Use the newly introduced RTC_FEATURE_ALARM bit to then test whether alarms
are available instead of relying on the presence of ops->set_alarm.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210110231752.1418816-2-alexandre.belloni@bootlin.com
Stable-dep-of: 0fedce7244e4 ("rtc: abx80x: Disable alarm feature if no interrupt attached")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4516c873e3b55856012ddd6db9d4366ce3c60c5d ]
The variable "other" in the struct red_stats is not used. Remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a8f5192809ca ("net/sched: sch_red: annotate data-races in red_dump_stats()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5154561d9b119f781249f8e845fecf059b38b483 ]
pie_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_pie_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17ed8 ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142944.4009941-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cc1ff87bce1ccd38410ab10960f576dcd17db679 ]
RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT
RECOMMENDED for PPPoE. In practice, pppd does not support negotiating
PFC for PPPoE sessions, and the current PPPoE driver assumes an
uncompressed (2-byte) protocol field. However, the generic PPP layer
function ppp_input() is not aware of the negotiation result, and still
accepts PFC frames.
If a peer with a broken implementation or an attacker sends a frame with
a compressed (1-byte) protocol field, the subsequent PPP payload is
shifted by one byte. This causes the network header to be 4-byte
misaligned, which may trigger unaligned access exceptions on some
architectures.
To reduce the attack surface, drop PPPoE PFC frames. Introduce
ppp_skb_is_compressed_proto() helper function to be used in both
ppp_generic.c and pppoe.c to avoid open-coding.
Fixes: 7fb1b8ca8fa1 ("ppp: Move PFC decompression to PPP generic layer")
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260415022456.141758-2-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46126db9c86110e5fc1e369b9bb89735ddefdae4 ]
Allow to dissect PPPoE specific fields which are:
- session ID (16 bits)
- ppp protocol (16 bits)
- type (16 bits) - this is PPPoE ethertype, for now only
ETH_P_PPP_SES is supported, possible ETH_P_PPP_DISC
in the future
The goal is to make the following TC command possible:
# tc filter add dev ens6f0 ingress prio 1 protocol ppp_ses \
flower \
pppoe_sid 12 \
ppp_proto ip \
action drop
Note that only PPPoE Session is supported.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: cc1ff87bce1c ("pppoe: drop PFC frames")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 34951fcf26c59e78ae430fba1fce7c08b1871249 ]
Our customers in the fiber telecom world have network configurations
where they would like to control their traffic according to the number
of tags appearing in the packet.
For example, TR247 GPON conformance test suite specification mostly
talks about untagged, single, double tagged packets and gives lax
guidelines on the vlan protocol vs. number of vlan tags.
This is different from the common IT networks where 802.1Q and 802.1ad
protocols are usually describe single and double tagged packet. GPON
configurations that we work with have arbitrary mix the above protocols
and number of vlan tags in the packet.
The goal is to make the following TC commands possible:
tc filter add dev eth1 ingress flower \
num_of_vlans 1 vlan_prio 5 action drop
From our logs, we have redirect rules such that:
tc filter add dev $GPON ingress flower num_of_vlans $N \
action mirred egress redirect dev $DEV
where N can range from 0 to 3 and $DEV is the function of $N.
Also there are rules setting skb mark based on the number of vlans:
tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \
$P action skbedit mark $M
This new dissector allows extracting the number of vlan tags existing in
the packet.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: cc1ff87bce1c ("pppoe: drop PFC frames")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36776b7f8a8955b4e75b5d490a75fee0c7a2a7ef ]
print_hex_dump_bytes() claims to be a simple wrapper around
print_hex_dump(), but it actally calls print_hex_dump_debug(), which
means no output is printed if (dynamic) DEBUG is disabled.
Update the documentation to match the implementation.
Fixes: 091cb0994edd20d6 ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/3d5c3069fd9102ecaf81d044b750cd613eb72a08.1774970392.git.geert+renesas@glider.be
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc6e29d42872680dca017f2e5169eefe971f8d89 ]
The MDSS resets have so far been left undescribed. Fix that.
Fixes: 75616da71291 ("dt-bindings: clock: Introduce QCOM sc7180 display clock bindings")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # sc7180-ecs-liva-qc710
Link: https://lore.kernel.org/r/20260120-topic-7180_dispcc_bcr-v1-1-0b1b442156c3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: b0bc6011c549 ("clk: qcom: dispcc-sc7180: Add missing MDSS resets")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dbbe7eaf0e4795bf003ac06872aaf52b6b6b1310 ]
This is similar to dev_err_probe() but for cases where an ERR_PTR() or
ERR_CAST() is to be returned simplifying patterns like:
dev_err_probe(dev, ret, ...);
return ERR_PTR(ret)
or
dev_err_probe(dev, PTR_ERR(ptr), ...);
return ERR_CAST(ptr)
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240606-dev-add_dev_errp_probe-v3-1-51bb229edd79@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 797cc011ae02 ("backlight: sky81452-backlight: Check return value of devm_gpiod_get_optional() in sky81452_bl_parse_dt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9e0cace7a6254070159ebd86497eadc29ea307ca ]
dev_err_probe() belongs to the printing API, hence
move the definition from device.h to dev_printk.h.
There is no change to the callers at all, since:
1) implementation is located in the same core.c;
2) dev_printk.h is guaranteed to be included by device.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20230721131309.16821-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 797cc011ae02 ("backlight: sky81452-backlight: Check return value of devm_gpiod_get_optional() in sky81452_bl_parse_dt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f43243c66e5e9ad839d235f82a58e73a7e7612af ]
The kernel coding style does not require 'extern' in function prototypes
in .h files, so remove them from include/linux/device.h as they are not
needed.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230324122711.2664537-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 797cc011ae02 ("backlight: sky81452-backlight: Check return value of devm_gpiod_get_optional() in sky81452_bl_parse_dt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e93ab401da4b2e2c1b8ef2424de2f238d51c8b2d ]
dquot_scan_active() can race with quota deactivation in
quota_release_workfn() like:
CPU0 (quota_release_workfn) CPU1 (dquot_scan_active)
============================== ==============================
spin_lock(&dq_list_lock);
list_replace_init(
&releasing_dquots, &rls_head);
/* dquot X on rls_head,
dq_count == 0,
DQ_ACTIVE_B still set */
spin_unlock(&dq_list_lock);
synchronize_srcu(&dquot_srcu);
spin_lock(&dq_list_lock);
list_for_each_entry(dquot,
&inuse_list, dq_inuse) {
/* finds dquot X */
dquot_active(X) -> true
atomic_inc(&X->dq_count);
}
spin_unlock(&dq_list_lock);
spin_lock(&dq_list_lock);
dquot = list_first_entry(&rls_head);
WARN_ON_ONCE(atomic_read(&dquot->dq_count));
The problem is not only a cosmetic one as under memory pressure the
caller of dquot_scan_active() can end up working on freed dquot.
Fix the problem by making sure the dquot is removed from releasing list
when we acquire a reference to it.
Fixes: 869b6ea1609f ("quota: Fix slow quotaoff")
Reported-by: Sam Sun <samsun1006219@gmail.com>
Link: https://lore.kernel.org/all/CAEkJfYPTt3uP1vAYnQ5V2ZWn5O9PLhhGi5HbOcAzyP9vbXyjeg@mail.gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc93c96fe34e10b873fef73e80cee52503f3a679 ]
snd_compress_register() and snd_compress_deregister() API functions
have been never used by in-tree drivers.
Let's clean up the dead code.
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210714162424.4412-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 796e119e9b14 ("ALSA: core: Validate compress device numbers without dynamic minors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c064abc68e009d2cc18416e7132d9c25e03125b6 ]
The entries later in enum dmi_entry_type don't match the SMBIOS
specification¹.
The entry for type 33: `64-Bit Memory Error Information` is not present and
thus the index for all later entries is incorrect.
Add it.
Also, add missing entry types 43-46, while at it.
¹ Search for "System Management BIOS (SMBIOS) Reference Specification"
[ bp: Drop the flaky SMBIOS spec URL. ]
Fixes: 93c890dbe5287 ("firmware: Add DMI entry types to the headers")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://patch.msgid.link/20260307141024.819807-2-superm1@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 756a0e011cfca0b45a48464aa25b05d9a9c2fb0b ]
Architecture support for rwlocks must be available whether or not
CONFIG_DEBUG_SPINLOCK has been defined. Move the definitions of the
arch_{read,write}_{lock,trylock,unlock}() macros such that these become
visbile if CONFIG_DEBUG_SPINLOCK=n.
This patch prepares for converting do_raw_{read,write}_trylock() into
inline functions. Without this patch that conversion triggers a build
failure for UP architectures, e.g. arm-ep93xx. I used the following
kernel configuration to build the kernel for that architecture:
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V7=n
CONFIG_ATAGS=y
CONFIG_MMU=y
CONFIG_ARCH_MULTI_V4T=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_ARCH_EP93XX=y
Fixes: fb1c8f93d869 ("[PATCH] spinlock consolidation")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313171510.230998-2-bvanassche@acm.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7746e3bd4cc19b5092e00d32d676e329bfcb6900 upstream.
fsnotify_get_mark_safe() may return false for a mark on an unrelated group,
which results in bypassing the permission check.
Fix by skipping over detached marks that are not in the current group.
CC: stable@vger.kernel.org
Fixes: abc77577a669 ("fsnotify: Provide framework for dropping SRCU lock in ->handle_event")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://patch.msgid.link/20260410144950.156160-1-mszeredi@redhat.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8de779dc40d35d39fa07387b6f921eb11df0f511 upstream.
dlfb_ops_mmap() uses remap_pfn_range() to map vmalloc framebuffer pages
to userspace but sets no vm_ops on the VMA. This means the kernel cannot
track active mmaps. When dlfb_realloc_framebuffer() replaces the backing
buffer via FBIOPUT_VSCREENINFO, existing mmap PTEs are not invalidated.
On USB disconnect, dlfb_ops_destroy() calls vfree() on the old pages
while userspace PTEs still reference them, resulting in a use-after-free:
the process retains read/write access to freed kernel pages.
Add vm_operations_struct with open/close callbacks that maintain an
atomic mmap_count on struct dlfb_data. In dlfb_realloc_framebuffer(),
check mmap_count and return -EBUSY if the buffer is currently mapped,
preventing buffer replacement while userspace holds stale PTEs.
Tested with PoC using dummy_hcd + raw_gadget USB device emulation.
Signed-off-by: Rajat Gupta <rajgupt@qti.qualcomm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b484311507b5d403c1f7a45f6aa3778549e268b upstream.
Even though nobody should use this value (except when declaring the
"flags" bitmap), kernel-doc still gets upset that it's not documented.
It reports:
WARNING: ../include/linux/device.h:519
Enum value 'DEV_FLAG_COUNT' not described in enum 'struct_device_flags'
Add the description of DEV_FLAG_COUNT.
Fixes: a2225b6e834a ("driver core: Don't let a device probe until it's ready")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/f318cd43-81fd-48b9-abf7-92af85f12f91@infradead.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260413195910.1.I23aca74fe2d3636a47df196a80920fecb2643220@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f1d4d2ecfcd1b577dc87350ea965fe81f272e83 upstream.
Outside of the EFI tpm code, the TPM_MEMREMAP()/TPM_MEMUNMAP functions are
defined as trivial macros, leading to the mapping_size variable ending
up unused:
In file included from drivers/char/tpm/tpm-sysfs.c:16:
In file included from drivers/char/tpm/tpm.h:28:
include/linux/tpm_eventlog.h:167:6: error: variable 'mapping_size' set but not used [-Werror,-Wunused-but-set-variable]
167 | int mapping_size;
Turn the stubs into inline functions to avoid this warning.
Cc: stable@vger.kernel.org # v5.3+
Fixes: c46f3405692d ("tpm: Reserve the TPM final events table")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a2225b6e834a838ae3c93709760edc0a169eb2f2 ]
The moment we link a "struct device" into the list of devices for the
bus, it's possible probe can happen. This is because another thread
can load the driver at any time and that can cause the device to
probe. This has been seen in practice with a stack crawl that looks
like this [1]:
really_probe()
__driver_probe_device()
driver_probe_device()
__driver_attach()
bus_for_each_dev()
driver_attach()
bus_add_driver()
driver_register()
__platform_driver_register()
init_module() [some module]
do_one_initcall()
do_init_module()
load_module()
__arm64_sys_finit_module()
invoke_syscall()
As a result of the above, it was seen that device_links_driver_bound()
could be called for the device before "dev->fwnode->dev" was
assigned. This prevented __fw_devlink_pickup_dangling_consumers() from
being called which meant that other devices waiting on our driver's
sub-nodes were stuck deferring forever.
It's believed that this problem is showing up suddenly for two
reasons:
1. Android has recently (last ~1 year) implemented an optimization to
the order it loads modules [2]. When devices opt-in to this faster
loading, modules are loaded one-after-the-other very quickly. This
is unlike how other distributions do it. The reproduction of this
problem has only been seen on devices that opt-in to Android's
"parallel module loading".
2. Android devices typically opt-in to fw_devlink, and the most
noticeable issue is the NULL "dev->fwnode->dev" in
device_links_driver_bound(). fw_devlink is somewhat new code and
also not in use by all Linux devices.
Even though the specific symptom where "dev->fwnode->dev" wasn't
assigned could be fixed by moving that assignment higher in
device_add(), other parts of device_add() (like the call to
device_pm_add()) are also important to run before probe. Only moving
the "dev->fwnode->dev" assignment would likely fix the current
symptoms but lead to difficult-to-debug problems in the future.
Fix the problem by preventing probe until device_add() has run far
enough that the device is ready to probe. If somehow we end up trying
to probe before we're allowed, __driver_probe_device() will return
-EPROBE_DEFER which will make certain the device is noticed.
In the race condition that was seen with Android's faster module
loading, we will temporarily add the device to the deferred list and
then take it off immediately when device_add() probes the device.
Instead of adding another flag to the bitfields already in "struct
device", instead add a new "flags" field and use that. This allows us
to freely change the bit from different thread without worrying about
corrupting nearby bits (and means threads changing other bit won't
corrupt us).
[1] Captured on a machine running a downstream 6.6 kernel
[2] https://cs.android.com/android/platform/superproject/main/+/main:system/core/libmodprobe/libmodprobe.cpp?q=LoadModulesParallel
Cc: stable@vger.kernel.org
Fixes: 2023c610dc54 ("Driver core: add new device to bus's list before probing")
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260406162231.v5.1.Id750b0fbcc94f23ed04b7aecabcead688d0d8c17@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 82a0302e7167d0b7c6cde56613db3748f8dd806d ]
Remove comment for reorder_work which no longer exists.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 71203f68c774 ("padata: Fix pd UAF once and for all")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Bin Lan <lanbincn@139.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 71203f68c7749609d7fc8ae6ad054bdedeb24f91 ]
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives.
Fixes: 16295bec6398 ("padata: Generic parallelization/serialization interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[ Adjust context of padata_find_next(). Replace
cpumask_next_wrap(cpu, pd->cpumask.pcpu) with
cpumask_next_wrap(cpu, pd->cpumask.pcpu, -1, false) in padata_reorder() in
v5.10 according to dc5bb9b769c9 ("cpumask: deprecate cpumask_next_wrap()") and
f954a2d37637 ("padata: switch padata_find_next() to using cpumask_next_wrap()")
. ]
Signed-off-by: Bin Lan <lanbincn@139.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 25e531b422dc2ac90cdae3b6e74b5cdeb081440d upstream.
xHCI hardware maintains its endpoint state between add_endpoint()
and drop_endpoint() calls followed by successful check_bandwidth().
So does the driver.
Core may call endpoint_disable() during xHCI endpoint life, so don't
clear host_ep->hcpriv then, because this breaks endpoint_reset().
If a driver calls usb_set_interface(), submits URBs which make host
sequence state non-zero and calls usb_clear_halt(), the device clears
its sequence state but xhci_endpoint_reset() bails out. The next URB
malfunctions: USB2 loses one packet, USB3 gets Transaction Error or
may not complete at all on some (buggy?) HCs from ASMedia and AMD.
This is triggered by uvcvideo on bulk video devices.
The code was copied from ehci_endpoint_disable() but it isn't needed
here - hcpriv should only be NULL on emulated root hub endpoints.
It might prevent resetting and inadvertently enabling a disabled and
dropped endpoint, but core shouldn't try to reset dropped endpoints.
Document xhci requirements regarding hcpriv. They are currently met.
Fixes: 18b74067ac78 ("xhci: Fix use-after-free regression in xhci clear hub TT implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-26-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2c28769a51deb6022d7fbd499987e237a01dd63a ]
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call
at the front of the recvmsg queue already has its mutex locked, it
requeues the call - whether or not the call is already queued. The call
may be on the queue because MSG_PEEK was also passed and so the call was
not dequeued or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue -
and moving it to the front if it is already queued. If we don't queue
it, we have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on
the queue, so fix that also.
Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Faith <faith@zellic.io>
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: stable@vger.kernel.org
[Adapted to 5.10: use write_lock_bh/write_unlock_bh, trace_rxrpc_call
directly for see-call tracing, 5.10 trace enum naming convention, and
added entries to both plain enum and EM() macro list.]
Signed-off-by: Jay Wang <wanjay@amazon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d55c571e4333fac71826e8db3b9753fadfbead6a ]
This script
#!/usr/bin/bash
echo 0 > /proc/sys/kernel/randomize_va_space
echo 'void main(void) {}' > TEST.c
# -fcf-protection to ensure that the 1st endbr32 insn can't be emulated
gcc -m32 -fcf-protection=branch TEST.c -o test
bpftrace -e 'uprobe:./test:main {}' -c ./test
"hangs", the probed ./test task enters an endless loop.
The problem is that with randomize_va_space == 0
get_unmapped_area(TASK_SIZE - PAGE_SIZE) called by xol_add_vma() can not
just return the "addr == TASK_SIZE - PAGE_SIZE" hint, this addr is used
by the stack vma.
arch_get_unmapped_area_topdown() doesn't take TIF_ADDR32 into account and
in_32bit_syscall() is false, this leads to info.high_limit > TASK_SIZE.
vm_unmapped_area() happily returns the high address > TASK_SIZE and then
get_unmapped_area() returns -ENOMEM after the "if (addr > TASK_SIZE - len)"
check.
handle_swbp() doesn't report this failure (probably it should) and silently
restarts the probed insn. Endless loop.
I think that the right fix should change the x86 get_unmapped_area() paths
to rely on TIF_ADDR32 rather than in_32bit_syscall(). Note also that if
CONFIG_X86_X32_ABI=y, in_x32_syscall() falsely returns true in this case
because ->orig_ax = -1.
But we need a simple fix for -stable, so this patch just sets TS_COMPAT if
the probed task is 32-bit to make in_ia32_syscall() true.
Fixes: 1b028f784e8c ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Reported-by: Paulo Andrade <pandrade@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/aV5uldEvV7pb4RA8@redhat.com/
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/aWO7Fdxn39piQnxu@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c20311d76cbaeb7ed2ecf9c8b8322f8fc4a7ae3 upstream.
Tracepoints are not allowed to sleep, as such the following splat is
generated due to call to ib_query_pkey() in atomic context.
WARNING: CPU: 0 PID: 1888000 at kernel/trace/ring_buffer.c:2492 rb_commit+0xc1/0x220
CPU: 0 PID: 1888000 Comm: kworker/u9:0 Kdump: loaded Tainted: G OE --------- - - 4.18.0-305.3.1.el8.x86_64 #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module_el8.3.0+555+a55c8938 04/01/2014
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
RIP: 0010:rb_commit+0xc1/0x220
RSP: 0000:ffffa8ac80f9bca0 EFLAGS: 00010202
RAX: ffff8951c7c01300 RBX: ffff8951c7c14a00 RCX: 0000000000000246
RDX: ffff8951c707c000 RSI: ffff8951c707c57c RDI: ffff8951c7c14a00
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8951c7c01300 R11: 0000000000000001 R12: 0000000000000246
R13: 0000000000000000 R14: ffffffff964c70c0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8951fbc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f20e8f39010 CR3: 000000002ca10005 CR4: 0000000000170ef0
Call Trace:
ring_buffer_unlock_commit+0x1d/0xa0
trace_buffer_unlock_commit_regs+0x3b/0x1b0
trace_event_buffer_commit+0x67/0x1d0
trace_event_raw_event_ib_mad_recv_done_handler+0x11c/0x160 [ib_core]
ib_mad_recv_done+0x48b/0xc10 [ib_core]
? trace_event_raw_event_cq_poll+0x6f/0xb0 [ib_core]
__ib_process_cq+0x91/0x1c0 [ib_core]
ib_cq_poll_work+0x26/0x80 [ib_core]
process_one_work+0x1a7/0x360
? create_worker+0x1a0/0x1a0
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x35/0x40
---[ end trace 78ba8509d3830a16 ]---
Fixes: 821bf1de45a1 ("IB/MAD: Add recv path trace point")
Signed-off-by: Leonid Ravich <lravich@gmail.com>
Link: https://lore.kernel.org/r/Y2t5feomyznrVj7V@leonid-Inspiron-3421
Signed-off-by: Leon Romanovsky <leon@kernel.org>
[ kovalev: bp to fix CVE-2022-50472 ]
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d5ad6ab61cbd89afdb60881f6274f74328af3ee9 ]
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260314065455.2462900-1-nbd@nbd.name
Fixes: 06be6b149f7e ("mac80211: add ieee80211_tx_prepare_skb() helper function")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ Exclude changes to drivers/net/wireless/mediatek/mt76/scan.c as this file is first
introduced by commit 31083e38548f("wifi: mt76: add code for emulating hardware scanning")
after linux-6.14.]
Signed-off-by: Li hongliang <1468888505@139.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0b16e69d17d8c35c5c9d5918bf596c75a44655d3 upstream.
When exiting to userspace to service an emulated MMIO write, copy the
to-be-written value to a scratch field in the MMIO fragment if the size
of the data payload is 8 bytes or less, i.e. can fit in a single chunk,
instead of pointing the fragment directly at the source value.
This fixes a class of use-after-free bugs that occur when the emulator
initiates a write using an on-stack, local variable as the source, the
write splits a page boundary, *and* both pages are MMIO pages. Because
KVM's ABI only allows for physically contiguous MMIO requests, accesses
that split MMIO pages are separated into two fragments, and are sent to
userspace one at a time. When KVM attempts to complete userspace MMIO in
response to KVM_RUN after the first fragment, KVM will detect the second
fragment and generate a second userspace exit, and reference the on-stack
variable.
The issue is most visible if the second KVM_RUN is performed by a separate
task, in which case the stack of the initiating task can show up as truly
freed data.
==================================================================
BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420
Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984
CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace:
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
check_memory_region+0xfd/0x1f0
memcpy+0x20/0x60
complete_emulated_mmio+0x305/0x420
kvm_arch_vcpu_ioctl_run+0x63f/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
RIP: 0033:0x42477d
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c
R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720
The buggy address belongs to the page:
page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
The bug can also be reproduced with a targeted KVM-Unit-Test by hacking
KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by
overwrite the data value with garbage.
Limit the use of the scratch fields to 8-byte or smaller accesses, and to
just writes, as larger accesses and reads are not affected thanks to
implementation details in the emulator, but add a sanity check to ensure
those details don't change in the future. Specifically, KVM never uses
on-stack variables for accesses larger that 8 bytes, e.g. uses an operand
in the emulator context, and *all* reads are buffered through the mem_read
cache.
Note! Using the scratch field for reads is not only unnecessary, it's
also extremely difficult to handle correctly. As above, KVM buffers all
reads through the mem_read cache, and heavily relies on that behavior when
re-emulating the instruction after a userspace MMIO read exit. If a read
splits a page, the first page is NOT an MMIO page, and the second page IS
an MMIO page, then the MMIO fragment needs to point at _just_ the second
chunk of the destination, i.e. its position in the mem_read cache. Taking
the "obvious" approach of copying the fragment value into the destination
when re-emulating the instruction would clobber the first chunk of the
destination, i.e. would clobber the data that was read from guest memory.
Fixes: f78146b0f923 ("KVM: Fix page-crossing MMIO")
Suggested-by: Yashu Zhang <zhangjiaji1@huawei.com>
Reported-by: Yashu Zhang <zhangjiaji1@huawei.com>
Closes: https://lore.kernel.org/all/369eaaa2b3c1425c85e8477066391bc7@huawei.com
Cc: stable@vger.kernel.org
Tested-by: Tom Lendacky <thomas.lendacky@gmail.com>
Tested-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://patch.msgid.link/20260225012049.920665-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c1a72a0fbe1b02c3ce0537f85f92ea935e0beec upstream.
There is a few stubs that left untouched during constification of
the fwnode related APIs. Constify three more stubs here.
Fixes: 8b9d6802583a ("ACPI: Constify acpi_bus helper functions, switch to macros")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
btrfs_sync_file()
[ Upstream commit a85b46db143fda5869e7d8df8f258ccef5fa1719 ]
If overlay is used on top of btrfs, dentry->d_sb translates to overlay's
super block and fsid assignment will lead to a crash.
Use file_inode(file)->i_sb to always get btrfs_sb.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 31e62c2ebbfdc3fe3dbdf5e02c92a9dc67087a3a upstream.
The 'dumpability' of a task is fundamentally about the memory image of
the task - the concept comes from whether it can core dump or not - and
makes no sense when you don't have an associated mm.
And almost all users do in fact use it only for the case where the task
has a mm pointer.
But we have one odd special case: ptrace_may_access() uses 'dumpable' to
check various other things entirely independently of the MM (typically
explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for
threads that no longer have a VM (and maybe never did, like most kernel
threads).
It's not what this flag was designed for, but it is what it is.
The ptrace code does check that the uid/gid matches, so you do have to
be uid-0 to see kernel thread details, but this means that the
traditional "drop capabilities" model doesn't make any difference for
this all.
Make it all make a *bit* more sense by saying that if you don't have a
MM pointer, we'll use a cached "last dumpability" flag if the thread
ever had a MM (it will be zero for kernel threads since it is never
set), and require a proper CAP_SYS_PTRACE capability to override.
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a664bf3d603dc3bdcf9ae47cc21e0daec706d7a5 upstream.
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly.
Fixes: 72548b093ee3 ("crypto: algif_aead - copy AAD from src to dst")
Reported-by: Taeyang Lee <0wn@theori.io>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This backports the current implementation of memcpy_sglist() from
upstream commit 4dffc9bbffb9ccfcda730d899c97c553599e7ca8.
This function was rewritten twice. The earlier implementations had many
prerequisite commits, while the latest implementation is standalone.
It's much easier to just backport the latest code directly.
[5.10: replaced kmap_local and memcpy_page]
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 002752af7b89b74c64fe6bec8c5fde3d3a7810d8 ]
Some of the fwnode APIs might return an error pointer instead of NULL
or valid fwnode handle. The result of such API call may be considered
optional and hence the test for it is usually done in a form of
fwnode = fwnode_find_reference(...);
if (IS_ERR(fwnode))
...error handling...
Nevertheless the resulting fwnode may have bumped the reference count
and hence caller of the above API is obliged to call fwnode_handle_put().
Since fwnode may be not valid either as NULL or error pointer the check
has to be performed there. This approach uglifies the code and adds
a point of making a mistake, i.e. forgetting about error point case.
To prevent this, allow an error pointer to be passed to the fwnode APIs.
Fixes: 83b34afb6b79 ("device property: Introduce fwnode_find_reference()")
Reported-by: Nuno Sá <nuno.sa@analog.com>
Tested-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fb38f314fbd173e2e9f9f0f2e720a5f4889562da ]
Historically we have a few variants how we access dev->fwnode
and dev->of_node. Some of the functions during development
gained different versions of the getters. Unify access to of_node
and as a side change slightly refactor ACPI specific branches.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b5d3e2fbcb10957521af14c4256cd0e5f68b9234 ]
Add fwnode_is_ancestor_of() helper function to check if a fwnode is an
ancestor of another fwnode.
Add fwnode_get_next_parent_dev() helper function that take as input a
fwnode and finds the closest ancestor fwnode that has a corresponding
struct device and returns that struct device.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-11-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4c5e7f0fcd592801c9cc18f29f80fbee84eb8669 ]
On arm64 server, we found folio that get from migration entry isn't locked
in softleaf_to_folio(). This issue triggers when mTHP splitting and
zap_nonpresent_ptes() races, and the root cause is lack of memory barrier
in softleaf_to_folio(). The race is as follows:
CPU0 CPU1
deferred_split_scan() zap_nonpresent_ptes()
lock folio
split_folio()
unmap_folio()
change ptes to migration entries
__split_folio_to_order() softleaf_to_folio()
set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry))
smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio))
prep_compound_page() for tail pages
In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages
are visible before the tail page becomes non-compound. smp_wmb() should
be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a
result, if zap_nonpresent_ptes() accesses migration entry that stores tail
pfn, softleaf_to_folio() may see the updated compound_head of tail page
before page->flags.
This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio()
because of the race between folio split and zap_nonpresent_ptes()
leading to a folio incorrectly undergoing modification without a folio
lock being held.
This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further
swapops predicates"), which in merged in v6.19-rc1.
To fix it, add missing smp_rmb() if the softleaf entry is migration entry
in softleaf_to_folio() and softleaf_to_page().
[tujinjiang@huawei.com: update function name and comments]
Link: https://lkml.kernel.org/r/20260321075214.3305564-1-tujinjiang@huawei.com
Link: https://lkml.kernel.org/r/20260319012541.4158561-1-tujinjiang@huawei.com
Fixes: e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ adapted upstream leafops.h changes to swapops.h ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f8dca15a1b190787bbd03285304b569631160eda upstream.
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0
Fixes: 7e0b2b57f01d ("netfilter: nft_ct: add ct timeout support")
Cc: stable@vger.kernel.org
Signed-off-by: Tuan Do <tuan@calif.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mmu_gather
commit 8ce720d5bd91e9dc16db3604aa4b1bf76770a9a1 upstream.
As reported, ever since commit 1013af4f585f ("mm/hugetlb: fix
huge_pmd_unshare() vs GUP-fast race") we can end up in some situations
where we perform so many IPI broadcasts when unsharing hugetlb PMD page
tables that it severely regresses some workloads.
In particular, when we fork()+exit(), or when we munmap() a large
area backed by many shared PMD tables, we perform one IPI broadcast per
unshared PMD table.
There are two optimizations to be had:
(1) When we process (unshare) multiple such PMD tables, such as during
exit(), it is sufficient to send a single IPI broadcast (as long as
we respect locking rules) instead of one per PMD table.
Locking prevents that any of these PMD tables could get reused before
we drop the lock.
(2) When we are not the last sharer (> 2 users including us), there is
no need to send the IPI broadcast. The shared PMD tables cannot
become exclusive (fully unshared) before an IPI will be broadcasted
by the last sharer.
Concurrent GUP-fast could walk into a PMD table just before we
unshared it. It could then succeed in grabbing a page from the
shared page table even after munmap() etc succeeded (and supressed
an IPI). But there is not difference compared to GUP-fast just
sleeping for a while after grabbing the page and re-enabling IRQs.
Most importantly, GUP-fast will never walk into page tables that are
no-longer shared, because the last sharer will issue an IPI
broadcast.
(if ever required, checking whether the PUD changed in GUP-fast
after grabbing the page like we do in the PTE case could handle
this)
So let's rework PMD sharing TLB flushing + IPI sync to use the mmu_gather
infrastructure so we can implement these optimizations and demystify the
code at least a bit. Extend the mmu_gather infrastructure to be able to
deal with our special hugetlb PMD table sharing implementation.
To make initialization of the mmu_gather easier when working on a single
VMA (in particular, when dealing with hugetlb), provide
tlb_gather_mmu_vma().
We'll consolidate the handling for (full) unsharing of PMD tables in
tlb_unshare_pmd_ptdesc() and tlb_flush_unshared_tables(), and track
in "struct mmu_gather" whether we had (full) unsharing of PMD tables.
Because locking is very special (concurrent unsharing+reuse must be
prevented), we disallow deferring flushing to tlb_finish_mmu() and instead
require an explicit earlier call to tlb_flush_unshared_tables().
>From hugetlb code, we call huge_pmd_unshare_flush() where we make sure
that the expected lock protecting us from concurrent unsharing+reuse is
still held.
Check with a VM_WARN_ON_ONCE() in tlb_finish_mmu() that
tlb_flush_unshared_tables() was properly called earlier.
Document it all properly.
Notes about tlb_remove_table_sync_one() interaction with unsharing:
There are two fairly tricky things:
(1) tlb_remove_table_sync_one() is a NOP on architectures without
CONFIG_MMU_GATHER_RCU_TABLE_FREE.
Here, the assumption is that the previous TLB flush would send an
IPI to all relevant CPUs. Careful: some architectures like x86 only
send IPIs to all relevant CPUs when tlb->freed_tables is set.
The relevant architectures should be selecting
MMU_GATHER_RCU_TABLE_FREE, but x86 might not do that in stable
kernels and it might have been problematic before this patch.
Also, the arch flushing behavior (independent of IPIs) is different
when tlb->freed_tables is set. Do we have to enlighten them to also
take care of tlb->unshared_tables? So far we didn't care, so
hopefully we are fine. Of course, we could be setting
tlb->freed_tables as well, but that might then unnecessarily flush
too much, because the semantics of tlb->freed_tables are a bit
fuzzy.
This patch changes nothing in this regard.
(2) tlb_remove_table_sync_one() is not a NOP on architectures with
CONFIG_MMU_GATHER_RCU_TABLE_FREE that actually don't need a sync.
Take x86 as an example: in the common case (!pv, !X86_FEATURE_INVLPGB)
we still issue IPIs during TLB flushes and don't actually need the
second tlb_remove_table_sync_one().
This optimized can be implemented on top of this, by checking e.g., in
tlb_remove_table_sync_one() whether we really need IPIs. But as
described in (1), it really must honor tlb->freed_tables then to
send IPIs to all relevant CPUs.
Notes on TLB flushing changes:
(1) Flushing for non-shared PMD tables
We're converting from flush_hugetlb_tlb_range() to
tlb_remove_huge_tlb_entry(). Given that we properly initialize the
MMU gather in tlb_gather_mmu_vma() to be hugetlb aware, similar to
__unmap_hugepage_range(), that should be fine.
(2) Flushing for shared PMD tables
We're converting from various things (flush_hugetlb_tlb_range(),
tlb_flush_pmd_range(), flush_tlb_range()) to tlb_flush_pmd_range().
tlb_flush_pmd_range() achieves the same that
tlb_remove_huge_tlb_entry() would achieve in these scenarios.
Note that tlb_remove_huge_tlb_entry() also calls
__tlb_remove_tlb_entry(), however that is only implemented on
powerpc, which does not support PMD table sharing.
Similar to (1), tlb_gather_mmu_vma() should make sure that TLB
flushing keeps on working as expected.
Further, note that the ptdesc_pmd_pts_dec() in huge_pmd_share() is not a
concern, as we are holding the i_mmap_lock the whole time, preventing
concurrent unsharing. That ptdesc_pmd_pts_dec() usage will be removed
separately as a cleanup later.
There are plenty more cleanups to be had, but they have to wait until
this is fixed.
[david@kernel.org: fix kerneldoc]
Link: https://lkml.kernel.org/r/f223dd74-331c-412d-93fc-69e360a5006c@kernel.org
Link: https://lkml.kernel.org/r/20251223214037.580860-5-david@kernel.org
Fixes: 1013af4f585f ("mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race")
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reported-by: "Uschakow, Stanislav" <suschako@amazon.de>
Closes: https://lore.kernel.org/all/4d3878531c76479d9f8ca9789dc6485d@amazon.de/
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 8ce720d5bd91e9dc16db3604aa4b1bf76770a9a1)
[ David: We don't have ptdesc and the wrappers, so work directly on
page->pt_share_count and pass "struct page" instead of "struct ptdesc".
CONFIG_HUGETLB_PMD_PAGE_TABLE_SHARING is still called
CONFIG_ARCH_WANT_HUGE_PMD_SHARE and is set even without
CONFIG_HUGETLB_PAGE. We don't have 550a7d60bd5e ("mm, hugepages: add
mremap() support for hugepage backed vma"), so move_hugetlb_page_tables()
does not exist. We don't have 40549ba8f8e0 ("hugetlb: use new vma_lock
for pmd sharing synchronization") and a98a2f0c8ce1 ("mm/rmap: split
migration into its own so changes in mm/rmap.c looks quite different. We
don't have 4ddb4d91b82f ("hugetlb: do not update address
in huge_pmd_unshare"), so huge_pmd_unshare() still gets a pointer to
an address. tlb_gather_mmu() + tlb_finish_mmu() still consume ranges, so
also teach tlb_gather_mmu_vma() to forward ranges. Some smaller
contextual stuff, in particular, around tlb_gather_mmu_full(). ]
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ca1a47cd3f5f4c46ca188b1c9a27af87d1ab2216 upstream.
Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using
mmu_gather)", v3.
One functional fix, one performance regression fix, and two related
comment fixes.
I cleaned up my prototype I recently shared [1] for the performance fix,
deferring most of the cleanups I had in the prototype to a later point.
While doing that I identified the other things.
The goal of this patch set is to be backported to stable trees "fairly"
easily. At least patch #1 and #4.
Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing
Patch #2 + #3 are simple comment fixes that patch #4 interacts with.
Patch #4 is a fix for the reported performance regression due to excessive
IPI broadcasts during fork()+exit().
The last patch is all about TLB flushes, IPIs and mmu_gather.
Read: complicated
There are plenty of cleanups in the future to be had + one reasonable
optimization on x86. But that's all out of scope for this series.
Runtime tested, with a focus on fixing the performance regression using
the original reproducer [2] on x86.
This patch (of 4):
We switched from (wrongly) using the page count to an independent shared
count. Now, shared page tables have a refcount of 1 (excluding
speculative references) and instead use ptdesc->pt_share_count to identify
sharing.
We didn't convert hugetlb_pmd_shared(), so right now, we would never
detect a shared PMD table as such, because sharing/unsharing no longer
touches the refcount of a PMD table.
Page migration, like mbind() or migrate_pages() would allow for migrating
folios mapped into such shared PMD tables, even though the folios are not
exclusive. In smaps we would account them as "private" although they are
"shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the
pagemap interface.
Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared().
Link: https://lkml.kernel.org/r/20251223214037.580860-1-david@kernel.org
Link: https://lkml.kernel.org/r/20251223214037.580860-2-david@kernel.org
Link: https://lore.kernel.org/all/8cab934d-4a56-44aa-b641-bfd7e23bd673@kernel.org/ [1]
Link: https://lore.kernel.org/all/8cab934d-4a56-44aa-b641-bfd7e23bd673@kernel.org/ [2]
Fixes: 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count")
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Tested-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: "Uschakow, Stanislav" <suschako@amazon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit ca1a47cd3f5f4c46ca188b1c9a27af87d1ab2216)
[ David: We don't have ptdesc and the wrappers, so work directly on
page->pt_share_count. ]
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7e8590987aa94c9dc51518fad0e58cb887b1db5 ]
IPSET_ATTR_NAME and IPSET_ATTR_NAMEREF are of NLA_STRING type, they
cannot be treated like a c-string.
They either have to be switched to NLA_NUL_STRING, or the compare
operations need to use the nla functions.
Fixes: f830837f0eed ("netfilter: ipset: list:set set type support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
steps
[ Upstream commit 54c516aeb8b39eeae6450b7d8076d381568dca46 ]
ACPI-2.0 says that the EC op_region handler must be available immediately
(like the standard default op_region handlers):
Quoting from the ACPI spec version 6.3: "6.5.4 _REG (Region) ...
2. OSPM must make Embedded Controller operation regions, accessed via
the Embedded Controllers described in ECDT, available before executing
any control method. These operation regions may become inaccessible
after OSPM runs _REG(EmbeddedControl, 0)."
So the OS must probe the ECDT described EC and install the OpRegion handler
before calling acpi_enable_subsystem() and acpi_initialize_objects().
This is a problem because calling acpi_install_address_space_handler()
does not just install the op_region handler, it also runs the EC's _REG
method. This _REG method may rely on initialization done by the _INI
methods of one of the PCI / _SB root devices.
For the other early/default op_region handlers the op_region handler
install and the _REG execution is split into 2 separate steps:
1. acpi_ev_install_region_handlers(), called early from acpi_load_tables()
2. acpi_ev_initialize_op_regions(), called from acpi_initialize_objects()
To fix the EC op_region issue, add 2 bew functions:
1. acpi_install_address_space_handler_no_reg()
2. acpi_execute_reg_methods()
to allow doing things in 2 steps for other op_region handlers,
like the EC handler, too.
Note that the comment describing acpi_ev_install_region_handlers() even has
an alinea describing this problem. Using the new methods allows users
to avoid this problem.
Link: https://github.com/acpica/acpica/pull/786
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214899
Reported-and-tested-by: Johannes Penßel <johannespenssel@posteo.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: f6484cadbcaf ("ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a9d74e7e403cb2e60d4d00c05f2f3ab2a33d0c3 ]
A bunch of the functions declared in include/acpi/acpixf.h have their
name aligned a space after the '(' of e.g. the
`ACPI_EXTERNAL_RETURN_STATUS(acpi_status` line above rather then being
directly aligned after the '('.
This breaks applying patches generated from the ACPICA upstream git,
remove the extra space before the function-names and all the arguments
to fix this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: f6484cadbcaf ("ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
