summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2026-03-04drm: of: drm_of_panel_bridge_remove(): fix device_node leakLuca Ceresoli1-0/+3
[ Upstream commit a4b4385d0523e39a7c058cb5a6c8269e513126ca ] drm_of_panel_bridge_remove() uses of_graph_get_remote_node() to get a device_node but does not put the node reference. Fixes: c70087e8f16f ("drm/drm_of: add drm_of_panel_bridge_remove function") Cc: stable@vger.kernel.org # v4.15 Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-1-8bad3ef90b9f@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQLuiz Augusto von Dentz1-0/+2
[ Upstream commit 7accb1c4321acb617faf934af59d928b0b047e2b ] This fixes responding with an invalid result caused by checking the wrong size of CID which should have been (cmd_len - sizeof(*req)) and on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C: > ACL Data RX: Handle 64 flags 0x02 dlen 14 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6 MTU: 64 MPS: 64 Source CID: 64 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reserved (0x000c) Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003) Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002) when more than one channel gets its MPS reduced: > ACL Data RX: Handle 64 flags 0x02 dlen 16 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8 MTU: 264 MPS: 99 Source CID: 64 ! Source CID: 65 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration successful (0x0000) Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002) Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected): > ACL Data RX: Handle 64 flags 0x02 dlen 14 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6 MTU: 65 MPS: 64 ! Source CID: 85 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration successful (0x0000) Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003) Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64): > ACL Data RX: Handle 64 flags 0x02 dlen 14 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6 MTU: 672 ! MPS: 63 Source CID: 64 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002) Result: Reconfiguration failed - other unacceptable parameters (0x0004) Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel: > ACL Data RX: Handle 64 flags 0x02 dlen 16 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8 MTU: 84 ! MPS: 71 Source CID: 64 ! Source CID: 65 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration successful (0x0000) Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002) Link: https://github.com/bluez/bluez/issues/1865 Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04include: uapi: netfilter_bridge.h: Cover for musl libcPhil Sutter1-0/+4
[ Upstream commit 4edd4ba71ce0df015303dba75ea9d20d1a217546 ] Musl defines its own struct ethhdr and thus defines __UAPI_DEF_ETHHDR to zero. To avoid struct redefinition errors, user space is therefore supposed to include netinet/if_ether.h before (or instead of) linux/if_ether.h. To relieve them from this burden, include the libc header here if not building for kernel space. Reported-by: Alyssa Ross <hi@alyssa.is> Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04virt: vbox: uapi: Mark inner unions in packed structs as packedThomas Weißschuh1-2/+2
[ Upstream commit c25d01e1c4f2d43f47af87c00e223f5ca7c71792 ] The unpacked unions within a packed struct generates alignment warnings on clang for 32-bit ARM: ./usr/include/linux/vbox_vmmdev_types.h:239:4: error: field u within 'struct vmmdev_hgcm_function_parameter32' is less aligned than 'union (unnamed union at ./usr/include/linux/vbox_vmmdev_types.h:223:2)' and is usually due to 'struct vmmdev_hgcm_function_parameter32' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] 239 | } u; | ^ ./usr/include/linux/vbox_vmmdev_types.h:254:6: error: field u within 'struct vmmdev_hgcm_function_parameter64::(anonymous union)::(unnamed at ./usr/include/linux/vbox_vmmdev_types.h:249:3)' is less aligned than 'union (unnamed union at ./usr/include/linux/vbox_vmmdev_types.h:251:4)' and is usually due to 'struct vmmdev_hgcm_function_parameter64::(anonymous union)::(unnamed at ./usr/include/linux/vbox_vmmdev_types.h:249:3)' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] With the recent changes to compile-test the UAPI headers in more cases, these warning in combination with CONFIG_WERROR breaks the build. Fix the warnings. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202512140314.DzDxpIVn-lkp@intel.com/ Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/linux-kbuild/20260110-uapi-test-disable-headers-arm-clang-unaligned-access-v1-1-b7b0fa541daa@kernel.org/ Suggested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-kbuild/29b2e736-d462-45b7-a0a9-85f8d8a3de56@app.fastmail.com/ Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Tested-by: Nicolas Schier <nsc@kernel.org> Reviewed-by: Nicolas Schier <nsc@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20260115-kbuild-alignment-vbox-v1-2-076aed1623ff@linutronix.de Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04hyper-v: Mark inner union in hv_kvp_exchg_msg_value as packedThomas Weißschuh1-1/+1
[ Upstream commit 1e5271393d777f6159d896943b4c44c4f3ecff52 ] The unpacked union within a packed struct generates alignment warnings on clang for 32-bit ARM: ./usr/include/linux/hyperv.h:361:2: error: field within 'struct hv_kvp_exchg_msg_value' is less aligned than 'union hv_kvp_exchg_msg_value::(anonymous at ./usr/include/linux/hyperv.h:361:2)' and is usually due to 'struct hv_kvp_exchg_msg_value' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] 361 | union { | ^ With the recent changes to compile-test the UAPI headers in more cases, this warning in combination with CONFIG_WERROR breaks the build. Fix the warning. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202512140314.DzDxpIVn-lkp@intel.com/ Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/linux-kbuild/20260110-uapi-test-disable-headers-arm-clang-unaligned-access-v1-1-b7b0fa541daa@kernel.org/ Suggested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-kbuild/29b2e736-d462-45b7-a0a9-85f8d8a3de56@app.fastmail.com/ Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Wei Liu (Microsoft) <wei.liu@kernel.org> Tested-by: Nicolas Schier <nsc@kernel.org> Reviewed-by: Nicolas Schier <nsc@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20260115-kbuild-alignment-vbox-v1-1-076aed1623ff@linutronix.de Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04media: dvb-core: dmxdevfilter must always flush bufsHans Verkuil1-2/+4
[ Upstream commit c4e620eccbef76aa5564ebb295e23d6540e27215 ] Currently the buffers are being filled until full, which works fine for the transport stream, but not when reading sections, those have to be returned to userspace immediately, otherwise dvbv5-scan will just wait forever. Add a 'flush' argument to dvb_vb2_fill_buffer to indicate whether the buffer must be flushed or wait until it is full. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04EFI/CPER: don't go past the ARM processor CPER record bufferMauro Carvalho Chehab1-1/+2
[ Upstream commit eae21beecb95a3b69ee5c38a659f774e171d730e ] There's a logic inside GHES/CPER to detect if the section_length is too small, but it doesn't detect if it is too big. Currently, if the firmware receives an ARM processor CPER record stating that a section length is big, kernel will blindly trust section_length, producing a very long dump. For instance, a 67 bytes record with ERR_INFO_NUM set 46198 and section length set to 854918320 would dump a lot of data going a way past the firmware memory-mapped area. Fix it by adding a logic to prevent it to go past the buffer if ERR_INFO_NUM is too big, making it report instead: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [Hardware Error]: event severity: recoverable [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: ARM processor error [Hardware Error]: MIDR: 0xff304b2f8476870a [Hardware Error]: section length: 854918320, CPER size: 67 [Hardware Error]: section length is too big [Hardware Error]: firmware-generated error record is incorrect [Hardware Error]: ERR_INFO_NUM is 46198 Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> [ rjw: Subject and changelog tweaks ] Link: https://patch.msgid.link/41cd9f6b3ace3cdff7a5e864890849e4b1c58b63.1767871950.git.mchehab+huawei@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04APEI/GHES: ensure that won't go past CPER allocated recordMauro Carvalho Chehab1-0/+1
[ Upstream commit fa2408a24f8f0db14d9cfc613ef162dc267d7ad4 ] The logic at ghes_new() prevents allocating too large records, by checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB). Yet, the allocation is done with the actual number of pages from the CPER bios table location, which can be smaller. Yet, a bad firmware could send data with a different size, which might be bigger than the allocated memory, causing an OOPS: Unable to handle kernel paging request at virtual address fff00000f9b40000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000 [fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000 Internal error: Oops: 0000000096000007 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022 Workqueue: kacpi_notify acpi_os_execute_deferred pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : hex_dump_to_buffer+0x30c/0x4a0 lr : hex_dump_to_buffer+0x328/0x4a0 sp : ffff800080e13880 x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083 x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004 x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083 x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010 x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020 x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008 x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020 x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000 x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008 Call trace: hex_dump_to_buffer+0x30c/0x4a0 (P) print_hex_dump+0xac/0x170 cper_estatus_print_section+0x90c/0x968 cper_estatus_print+0xf0/0x158 __ghes_print_estatus+0xa0/0x148 ghes_proc+0x1bc/0x220 ghes_notify_hed+0x5c/0xb8 notifier_call_chain+0x78/0x148 blocking_notifier_call_chain+0x4c/0x80 acpi_hed_notify+0x28/0x40 acpi_ev_notify_dispatch+0x50/0x80 acpi_os_execute_deferred+0x24/0x48 process_one_work+0x15c/0x3b0 worker_thread+0x2d0/0x400 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44) ---[ end trace 0000000000000000 ]--- Prevent that by taking the actual allocated are into account when checking for CPER length. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> [ rjw: Subject tweaks ] Link: https://patch.msgid.link/4e70310a816577fabf37d94ed36cde4ad62b1e0a.1767871950.git.mchehab+huawei@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04audit: add missing syscalls to read classJeffrey Bencteux1-0/+6
[ Upstream commit bcb90a2834c7393c26df9609b889a3097b7700cd ] The "at" variant of getxattr() and listxattr() are missing from the audit read class. Calling getxattrat() or listxattrat() on a file to read its extended attributes will bypass audit rules such as: -w /tmp/test -p rwa -k test_rwa The current patch adds missing syscalls to the audit read class. Signed-off-by: Jeffrey Bencteux <jeff@bencteux.fr> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04audit: add fchmodat2() to change attributes classJeffrey Bencteux1-0/+3
[ Upstream commit 4f493a6079b588cf1f04ce5ed6cdad45ab0d53dc ] fchmodat2(), introduced in version 6.6 is currently not in the change attribute class of audit. Calling fchmodat2() to change a file attribute in the same fashion than chmod() or fchmodat() will bypass audit rules such as: -w /tmp/test -p rwa -k test_rwa The current patch adds fchmodat2() to the change attributes class. Signed-off-by: Jeffrey Bencteux <jeff@bencteux.fr> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04ipv6: fix a race in ip6_sock_set_v6only()Eric Dumazet1-4/+7
[ Upstream commit 452a3eee22c57a5786ae6db5c97f3b0ec13bb3b7 ] It is unlikely that this function will be ever called with isk->inet_num being not zero. Perform the check on isk->inet_num inside the locked section for complete safety. Fixes: 9b115749acb24 ("ipv6: add ip6_sock_set_v6only") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de> Link: https://patch.msgid.link/20260216102202.3343588-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04misc: rtsx: Add SD Express mode support for RTS5261Rui Feng1-0/+23
[ Upstream commit 5afe802132f242f5520d2acac09ea05d31e3c7cf ] RTS5261 support SD mode and PCIe/NVMe mode. The workflow is as follows. 1.RTS5261 work in SD mode and set MMC_CAPS2_SD_EXP flag. 2.If card is plugged in, Host send CMD8 to ask card's PCIe availability. 3.If the card has PCIe availability and WP is not set, init_sd_express() will be invoked, RTS5261 switch to PCIe/NVMe mode. 4.Mmc driver handover it to NVMe driver. 5.If card is unplugged, RTS5261 will switch to SD mode. Signed-off-by: Rui Feng <rui_feng@realsil.com.cn> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/1603936668-3363-1-git-send-email-rui_feng@realsil.com.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Stable-dep-of: aced969e9bf3 ("mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04mmc: core: Initial support for SD express card/hostUlf Hansson1-0/+7
[ Upstream commit ead49373d2916080509f51fc6a4ee8f9bc021b9b ] In the SD specification v7.10 the SD express card has been added. This new type of removable SD card, can be managed via a PCIe/NVMe based interface, while also allowing backwards compatibility towards the legacy SD interface. To keep the backwards compatibility, it's required to start the initialization through the legacy SD interface. If it turns out that the mmc host and the SD card, both supports the PCIe/NVMe interface, then a switch should be allowed. Therefore, let's introduce some basic support for this type of SD cards to the mmc core. The mmc host, should set MMC_CAP2_SD_EXP if it supports this interface and MMC_CAP2_SD_EXP_1_2V, if also 1.2V is supported, as to inform the core about it. To deal with the switch to the PCIe/NVMe interface, the mmc host is required to implement a new host ops, ->init_sd_express(). Based on the initial communication between the host and the card, host->ios.timing is set to either MMC_TIMING_SD_EXP or MMC_TIMING_SD_EXP_1_2V, depending on if 1.2V is supported or not. In this way, the mmc host can check these values in its ->init_sd_express() ops, to know how to proceed with the handover. Note that, to manage card insert/removal, the mmc core sticks with using the ->get_cd() callback, which means it's the host's responsibility to make sure it provides valid data, even if the card may be managed by PCIe/NVMe at the moment. As long as the card seems to be present, the mmc core keeps the card powered on. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Rui Feng <rui_feng@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/1603936636-3126-1-git-send-email-rui_feng@realsil.com.cn Stable-dep-of: aced969e9bf3 ("mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04clk: Move clk_{save,restore}_context() to COMMON_CLK sectionGeert Uytterhoeven1-24/+24
[ Upstream commit f47c1b77d0a2a9c0d49ec14302e74f933398d1a3 ] The clk_save_context() and clk_restore_context() helpers are only implemented by the Common Clock Framework. They are not available when using legacy clock frameworks. Dummy implementations are provided, but only if no clock support is available at all. Hence when CONFIG_HAVE_CLK=y, but CONFIG_COMMON_CLK is not enabled: m68k-linux-gnu-ld: drivers/net/phy/air_en8811h.o: in function `en8811h_resume': air_en8811h.c:(.text+0x83e): undefined reference to `clk_restore_context' m68k-linux-gnu-ld: drivers/net/phy/air_en8811h.o: in function `en8811h_suspend': air_en8811h.c:(.text+0x856): undefined reference to `clk_save_context' Fix this by moving forward declarations and dummy implementions from the HAVE_CLK to the COMMON_CLK section. Fixes: 8b95d1ce3300c411 ("clk: Add functions to save/restore clock context en-masse") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202511301553.eaEz1nEW-lkp@intel.com/ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04RDMA/core: add rdma_rw_max_sge() helper for SQ sizingChuck Lever1-0/+2
[ Upstream commit afcae7d7b8a278a6c29e064f99e5bafd4ac1fb37 ] svc_rdma_accept() computes sc_sq_depth as the sum of rq_depth and the number of rdma_rw contexts (ctxts). This value is used to allocate the Send CQ and to initialize the sc_sq_avail credit pool. However, when the device uses memory registration for RDMA operations, rdma_rw_init_qp() inflates the QP's max_send_wr by a factor of three per context to account for REG and INV work requests. The Send CQ and credit pool remain sized for only one work request per context, causing Send Queue exhaustion under heavy NFS WRITE workloads. Introduce rdma_rw_max_sge() to compute the actual number of Send Queue entries required for a given number of rdma_rw contexts. Upper layer protocols call this helper before creating a Queue Pair so that their Send CQs and credit accounting match the QP's true capacity. Update svc_rdma_accept() to use rdma_rw_max_sge() when computing sc_sq_depth, ensuring the credit pool reflects the work requests that rdma_rw_init_qp() will reserve. Reviewed-by: Christoph Hellwig <hch@lst.de> Fixes: 00bd1439f464 ("RDMA/rw: Support threshold for registration vs scattering to local pages") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20260128005400.25147-5-cel@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04RDMA/core: Fix a couple of obvious typos in commentsChuck Lever1-1/+1
[ Upstream commit 0aa44595d61ca9e61239f321fec799518884feb3 ] Fix typos. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/169643338101.8035.6826446669479247727.stgit@manet.1015granger.net Signed-off-by: Leon Romanovsky <leon@kernel.org> Stable-dep-of: afcae7d7b8a2 ("RDMA/core: add rdma_rw_max_sge() helper for SQ sizing") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04svcrdma: Maintain a Receive water markChuck Lever1-0/+2
[ Upstream commit c558d47596867ff1082fd7475b63670f63f7f5cf ] Post more Receives when the number of pending Receives drops below a water mark. The batch mechanism is disabled if the underlying device cannot support a reasonably-sized Receive Queue. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Stable-dep-of: afcae7d7b8a2 ("RDMA/core: add rdma_rw_max_sge() helper for SQ sizing") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04PM: core: Add new *_PM_OPS macros, deprecate old onesPaul Cercueil1-24/+50
[ Upstream commit 1a3c7bb088266fa2db017be299f91f1c1894c857 ] This commit introduces the following macros: SYSTEM_SLEEP_PM_OPS() LATE_SYSTEM_SLEEP_PM_OPS() NOIRQ_SYSTEM_SLEEP_PM_OPS() RUNTIME_PM_OPS() These new macros are very similar to their SET_*_PM_OPS() equivalent. They however differ in the fact that the callbacks they set will always be seen as referenced by the compiler. This means that the callback functions don't need to be wrapped with a #ifdef CONFIG_PM guard, or tagged with __maybe_unused, to prevent the compiler from complaining about unused static symbols. The compiler will then simply evaluate at compile time whether or not these symbols are dead code. The callbacks that are only useful with CONFIG_PM_SLEEP is enabled, are now also wrapped with a new pm_sleep_ptr() macro, which is inspired from pm_ptr(). This is needed for drivers that use different callbacks for sleep and runtime PM, to handle the case where CONFIG_PM is set and CONFIG_PM_SLEEP is not. This commit also deprecates the following macros: SIMPLE_DEV_PM_OPS() UNIVERSAL_DEV_PM_OPS() And introduces the following macros: DEFINE_SIMPLE_DEV_PM_OPS() DEFINE_UNIVERSAL_DEV_PM_OPS() These macros are similar to the functions they were created to replace, with the following differences: - They use the new macros introduced above, and as such always reference the provided callback functions. - They are not tagged with __maybe_unused. They are meant to be used with pm_ptr() or pm_sleep_ptr() for DEFINE_UNIVERSAL_DEV_PM_OPS() and DEFINE_SIMPLE_DEV_PM_OPS() respectively. - They declare the symbol static, since every driver seems to do that anyway; and if a non-static use-case is needed an indirection pointer could be used. The point of this change, is to progressively switch from a code model where PM callbacks are all protected behind CONFIG_PM guards, to a code model where the PM callbacks are always seen by the compiler, but discarded if not used. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 0ba2035026d0 ("crypto: ccp - Add an S4 restore flow") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04PM: core: Redefine pm_ptr() macroPaul Cercueil1-5/+1
[ Upstream commit c06ef740d401d0f4ab188882bf6f8d9cf0f75eaf ] The pm_ptr() macro was previously conditionally defined, according to the value of the CONFIG_PM option. This meant that the pointed structure was either referenced (if CONFIG_PM was set), or never referenced (if CONFIG_PM was not set), causing it to be detected as unused by the compiler. This worked fine, but required the __maybe_unused compiler attribute to be used to every symbol pointed to by a pointer wrapped with pm_ptr(). We can do better. With this change, the pm_ptr() is now defined the same, independently of the value of CONFIG_PM. It now uses the (?:) ternary operator to conditionally resolve to its argument. Since the condition is known at compile time, the compiler will then choose to discard the unused symbols, which won't need to be tagged with __maybe_unused anymore. This pm_ptr() macro is usually used with pointers to dev_pm_ops structures created with SIMPLE_DEV_PM_OPS() or similar macros. These do use a __maybe_unused flag, which is now useless with this change, so it later can be removed. However in the meantime it causes no harm, and all the drivers still compile fine with the new pm_ptr() macro. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 0ba2035026d0 ("crypto: ccp - Add an S4 restore flow") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04power: supply: wm97xx_battery: Convert to GPIO descriptorLinus Walleij1-1/+0
[ Upstream commit cb6d6918c56ffd98e88164d5471f692d33dabf2b ] This converts the WM97xx driver to use a GPIO descriptor instead of passing a GPIO number thru platform data. Like everything else in the driver, use a simple local variable for the descriptor, it can only ever appear in one instance anyway so it should not hurt. After converting the driver I noticed that none of the boardfiles actually define a meaningful GPIO line for this, but hey, it is converted. Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Stable-dep-of: 39fe0eac6d75 ("power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04netfilter: nf_conncount: increase the connection clean up limit to 64Fernando Fernandez Mancera1-0/+1
[ Upstream commit 21d033e472735ecec677f1ae46d6740b5e47a4f3 ] After the optimization to only perform one GC per jiffy, a new problem was introduced. If more than 8 new connections are tracked per jiffy the list won't be cleaned up fast enough possibly reaching the limit wrongly. In order to prevent this issue, only skip the GC if it was already triggered during the same jiffy and the increment is lower than the clean up limit. In addition, increase the clean up limit to 64 connections to avoid triggering GC too often and do more effective GCs. This has been tested using a HTTP server and several performance tools while having nft_connlimit/xt_connlimit or OVS limit configured. Output of slowhttptest + OVS limit at 52000 connections: slow HTTP test status on 340th second: initializing: 0 pending: 432 connected: 51998 error: 0 closed: 0 service available: YES Fixes: d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC") Reported-by: Aleksandra Rukomoinikova <ARukomoinikova@k2.cloud> Closes: https://lore.kernel.org/netfilter/b2064e7b-0776-4e14-adb6-c68080987471@k2.cloud/ Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04regulator: core: Fix off_on_delay handlingVincent Whitchurch1-1/+1
[ Upstream commit a8ce7bd89689997537dd22dcbced46cf23dc19da ] The jiffies-based off_on_delay implementation has a couple of problems that cause it to sometimes not actually delay for the required time: (1) If, for example, the off_on_delay time is equivalent to one jiffy, and the ->last_off_jiffy is set just before a new jiffy starts, then _regulator_do_enable() does not wait at all since it checks using time_before(). (2) When jiffies overflows, the value of "remaining" becomes higher than "max_delay" and the code simply proceeds without waiting. Fix these problems by changing it to use ktime_t instead. [Note that since jiffies doesn't start at zero but at INITIAL_JIFFIES ("-5 minutes"), (2) above also led to the code not delaying if the first regulator_enable() is called when the ->last_off_jiffy is not initialised, such as for regulators with ->constraints->boot_on set. It's not clear to me if this was intended or not, but I've preserved this behaviour explicitly with the check for a non-zero ->last_off.] Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20210423114524.26414-1-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 86a8eeb0e913 ("regulator: core: move supply check earlier in set_machine_constraints()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04mfd: wm8350-core: Use IRQF_ONESHOTSebastian Andrzej Siewior1-1/+1
[ Upstream commit 553b4999cbe231b5011cb8db05a3092dec168aca ] Using a threaded interrupt without a dedicated primary handler mandates the IRQF_ONESHOT flag to mask the interrupt source while the threaded handler is active. Otherwise the interrupt can fire again before the threaded handler had a chance to run. Mark explained that this should not happen with this hardware since it is a slow irqchip which is behind an I2C/ SPI bus but the IRQ-core will refuse to accept such a handler. Set IRQF_ONESHOT so the interrupt source is masked until the secondary handler is done. Fixes: 1c6c69525b40e ("genirq: Reject bogus threaded irq requests") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20260128095540.863589-16-bigeasy@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04i3c: remove i2c board info from i2c_dev_descJamie Iles1-1/+0
[ Upstream commit 31b9887c7258ca47d9c665a80f19f006c86756b1 ] I2C board info is only required during adapter setup so there is no requirement to keeping a pointer to it once running. To support dynamic device addition we can't rely on board info - user-space creation through sysfs won't have a boardinfo. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220117174816.1963463-2-quic_jiles@quicinc.com Stable-dep-of: 3502cea99c7c ("i3c: Move device name assignment after i3c_bus_init") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06mm/pagewalk: add walk_page_range_vma()David Hildenbrand1-0/+3
[ Upstream commit e07cda5f232fac4de0925d8a4c92e51e41fa2f6e ] Let's add walk_page_range_vma(), which is similar to walk_page_vma(), however, is only interested in a subset of the VMA range. To be used in KSM code to stop using follow_page() next. Link: https://lkml.kernel.org/r/20221021101141.84170-8-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: f5548c318d6 ("ksm: use range-walk function to jump over holes in scan_get_next_rmap_item") Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06nvme-pci: do not directly handle subsys reset falloutKeith Busch1-0/+3
[ Upstream commit 210b1f6576e8b367907e7ff51ef425062e1468e4 ] Scheduling reset_work after a nvme subsystem reset is expected to fail on pcie, but this also prevents potential handling the platform's pcie services may provide that might successfully recovering the link without re-enumeration. Such examples include AER, DPC, and power's EEH. Provide a pci specific operation that safely initiates a subsystem reset, and instead of scheduling reset work, read back the status register to trigger a pcie read error. Since this only affects pci, the other fabrics drivers subscribe to a generic nvmf subsystem reset that is exactly the same as before. The loop fabric doesn't use it because nvmet doesn't support setting that property anyway. And since we're using the magic NSSR value in two places now, provide a symbolic define for it. Reported-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Stable-dep-of: 0edb475ac0a7 ("nvme: fix PCIe subsystem reset controller state transition") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06nfc: nci: Fix race between rfkill and nci_unregister_device().Kuniyuki Iwashima1-0/+2
[ Upstream commit d2492688bb9fed6ab6e313682c387ae71a66ebae ] syzbot reported the splat below [0] without a repro. It indicates that struct nci_dev.cmd_wq had been destroyed before nci_close_device() was called via rfkill. nci_dev.cmd_wq is only destroyed in nci_unregister_device(), which (I think) was called from virtual_ncidev_close() when syzbot close()d an fd of virtual_ncidev. The problem is that nci_unregister_device() destroys nci_dev.cmd_wq first and then calls nfc_unregister_device(), which removes the device from rfkill by rfkill_unregister(). So, the device is still visible via rfkill even after nci_dev.cmd_wq is destroyed. Let's unregister the device from rfkill first in nci_unregister_device(). Note that we cannot call nfc_unregister_device() before nci_close_device() because 1) nfc_unregister_device() calls device_del() which frees all memory allocated by devm_kzalloc() and linked to ndev->conn_info_list 2) nci_rx_work() could try to queue nci_conn_info to ndev->conn_info_list which could be leaked Thus, nfc_unregister_device() is split into two functions so we can remove rfkill interfaces only before nci_close_device(). [0]: DEBUG_LOCKS_WARN_ON(1) WARNING: kernel/locking/lockdep.c:238 at hlock_class kernel/locking/lockdep.c:238 [inline], CPU#0: syz.0.8675/6349 WARNING: kernel/locking/lockdep.c:238 at check_wait_context kernel/locking/lockdep.c:4854 [inline], CPU#0: syz.0.8675/6349 WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x39d/0x2cf0 kernel/locking/lockdep.c:5187, CPU#0: syz.0.8675/6349 Modules linked in: CPU: 0 UID: 0 PID: 6349 Comm: syz.0.8675 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026 RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline] RIP: 0010:check_wait_context kernel/locking/lockdep.c:4854 [inline] RIP: 0010:__lock_acquire+0x3a4/0x2cf0 kernel/locking/lockdep.c:5187 Code: 18 00 4c 8b 74 24 08 75 27 90 e8 17 f2 fc 02 85 c0 74 1c 83 3d 50 e0 4e 0e 00 75 13 48 8d 3d 43 f7 51 0e 48 c7 c6 8b 3a de 8d <67> 48 0f b9 3a 90 31 c0 0f b6 98 c4 00 00 00 41 8b 45 20 25 ff 1f RSP: 0018:ffffc9000c767680 EFLAGS: 00010046 RAX: 0000000000000001 RBX: 0000000000040000 RCX: 0000000000080000 RDX: ffffc90013080000 RSI: ffffffff8dde3a8b RDI: ffffffff8ff24ca0 RBP: 0000000000000003 R08: ffffffff8fef35a3 R09: 1ffffffff1fde6b4 R10: dffffc0000000000 R11: fffffbfff1fde6b5 R12: 00000000000012a2 R13: ffff888030338ba8 R14: ffff888030338000 R15: ffff888030338b30 FS: 00007fa5995f66c0(0000) GS:ffff8881256f8000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7e72f842d0 CR3: 00000000485a0000 CR4: 00000000003526f0 Call Trace: <TASK> lock_acquire+0x106/0x330 kernel/locking/lockdep.c:5868 touch_wq_lockdep_map+0xcb/0x180 kernel/workqueue.c:3940 __flush_workqueue+0x14b/0x14f0 kernel/workqueue.c:3982 nci_close_device+0x302/0x630 net/nfc/nci/core.c:567 nci_dev_down+0x3b/0x50 net/nfc/nci/core.c:639 nfc_dev_down+0x152/0x290 net/nfc/core.c:161 nfc_rfkill_set_block+0x2d/0x100 net/nfc/core.c:179 rfkill_set_block+0x1d2/0x440 net/rfkill/core.c:346 rfkill_fop_write+0x461/0x5a0 net/rfkill/core.c:1301 vfs_write+0x29a/0xb90 fs/read_write.c:684 ksys_write+0x150/0x270 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa59b39acb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fa5995f6028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fa59b615fa0 RCX: 00007fa59b39acb9 RDX: 0000000000000008 RSI: 0000200000000080 RDI: 0000000000000007 RBP: 00007fa59b408bf7 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa59b616038 R14: 00007fa59b615fa0 R15: 00007ffc82218788 </TASK> Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Reported-by: syzbot+f9c5fd1a0874f9069dce@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/695e7f56.050a0220.1c677c.036c.GAE@google.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260127040411.494931-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06net/mlx5e: Expose rx_oversize_pkts_buffer counterGal Pressman1-2/+6
[ Upstream commit 16ab85e78439bab1201ff26ba430231d1574b4ae ] Add the rx_oversize_pkts_buffer counter to ethtool statistics. This counter exposes the number of dropped received packets due to length which arrived to RQ and exceed software buffer size allocated by the device for incoming traffic. It might imply that the device MTU is larger than the software buffers size. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 476681f10cc1 ("net/mlx5e: Account for netdev stats in ndo_get_stats64") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06net/mlx5: Add HW definitions of vport debug countersSaeed Mahameed1-4/+19
[ Upstream commit 3e94e61bd44d90070dcda53b647fdc826097ef26 ] total_q_under_processor_handle - number of queues in error state due to an async error or errored command. send_queue_priority_update_flow - number of QP/SQ priority/SL update events. cq_overrun - number of times CQ entered an error state due to an overflow. async_eq_overrun -number of time an EQ mapped to async events was overrun. comp_eq_overrun - number of time an EQ mapped to completion events was overrun. quota_exceeded_command - number of commands issued and failed due to quota exceeded. invalid_command - number of commands issued and failed dues to any reason other than quota exceeded. Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Stable-dep-of: 476681f10cc1 ("net/mlx5e: Account for netdev stats in ndo_get_stats64") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06posix-clock: Store file pointer in struct posix_clock_contextWojtek Wasko1-1/+5
[ Upstream commit e859d375d1694488015e6804bfeea527a0b25b9f ] File descriptor based pc_clock_*() operations of dynamic posix clocks have access to the file pointer and implement permission checks in the generic code before invoking the relevant dynamic clock callback. Character device operations (open, read, poll, ioctl) do not implement a generic permission control and the dynamic clock callbacks have no access to the file pointer to implement them. Extend struct posix_clock_context with a struct file pointer and initialize it in posix_clock_open(), so that all dynamic clock callbacks can access it. Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Wojtek Wasko <wwasko@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06posix-clock: introduce posix_clock_context conceptXabier Marquiegui1-8/+27
[ Upstream commit 60c6946675fc06dd2fd2b7a4b6fd1c1f046f1056 ] Add the necessary structure to support custom private-data per posix-clock user. The previous implementation of posix-clock assumed all file open instances need access to the same clock structure on private_data. The need for individual data structures per file open instance has been identified when developing support for multiple timestamp event queue users for ptp_clock. Signed-off-by: Xabier Marquiegui <reibax@gmail.com> Suggested-by: Richard Cochran <richardcochran@gmail.com> Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: e859d375d169 ("posix-clock: Store file pointer in struct posix_clock_context") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06ALSA: pcm: Improve the fix for race of buffer access at PCM OSS layerJaroslav Kysela1-1/+1
commit 47c27c9c9c720bc93fdc69605d0ecd9382e99047 upstream. Handle the error code from snd_pcm_buffer_access_lock() in snd_pcm_runtime_buffer_set_silence() function. Found by Alexandros Panagiotou <apanagio@redhat.com> Fixes: 93a81ca06577 ("ALSA: pcm: Fix race of buffer access at PCM OSS layer") Cc: stable@vger.kernel.org # 6.15 Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://patch.msgid.link/20260107213642.332954-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06textsearch: describe @list member in ts_ops searchBagas Sanjaya1-0/+1
[ Upstream commit f26528478bb102c28e7ac0cbfc8ec8185afdafc7 ] Sphinx reports kernel-doc warning: WARNING: ./include/linux/textsearch.h:49 struct member 'list' not described in 'ts_ops' Describe @list member to fix it. Link: https://lkml.kernel.org/r/20251219014006.16328-4-bagasdotme@gmail.com Fixes: 2de4ff7bd658 ("[LIB]: Textsearch infrastructure.") Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06macvlan: Add nodst option to macvlan type sourceJethro Beekman1-0/+1
[ Upstream commit 427f0c8c194b22edcafef1b0a42995ddc5c2227d ] The default behavior for source MACVLAN is to duplicate packets to appropriate type source devices, and then do the normal destination MACVLAN flow. This patch adds an option to skip destination MACVLAN processing if any matching source MACVLAN device has the option set. This allows setting up a "catch all" device for source MACVLAN: create one or more devices with type source nodst, and one device with e.g. type vepa, and incoming traffic will be received on exactly one device. v2: netdev wants non-standard line length Signed-off-by: Jethro Beekman <kernel@jbeekman.nl> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 7470a7a63dc1 ("macvlan: fix possible UAF in macvlan_forward_source()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19netdev: preserve NETIF_F_ALL_FOR_ALL across TSO updatesDi Zhu1-1/+2
[ Upstream commit 02d1e1a3f9239cdb3ecf2c6d365fb959d1bf39df ] Directly increment the TSO features incurs a side effect: it will also directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device, which can cause issues such as the inability to enable the nocache copy feature on the bonding driver. The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby preventing it from being cleared. Fixes: b0ce3508b25e ("bonding: allow TSO being set on bonding master") Signed-off-by: Di Zhu <zhud@hygon.cn> Link: https://patch.msgid.link/20251224012224.56185-1-zhud@hygon.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddressMike Christie1-0/+2
[ Upstream commit 6f1d64b13097e85abda0f91b5638000afc5f9a06 ] Bug report and analysis from Ding Hui. During iSCSI session logout, if another task accesses the shost ipaddress attr, we can get a KASAN UAF report like this: [ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0 [ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088 [ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3 [ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 276.944470] Call Trace: [ 276.944943] <TASK> [ 276.945397] dump_stack_lvl+0x34/0x48 [ 276.945887] print_address_description.constprop.0+0x86/0x1e7 [ 276.946421] print_report+0x36/0x4f [ 276.947358] kasan_report+0xad/0x130 [ 276.948234] kasan_check_range+0x35/0x1c0 [ 276.948674] _raw_spin_lock_bh+0x78/0xe0 [ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp] [ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi] [ 276.952185] dev_attr_show+0x3f/0x80 [ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0 [ 276.953401] seq_read_iter+0x402/0x1020 [ 276.954260] vfs_read+0x532/0x7b0 [ 276.955113] ksys_read+0xed/0x1c0 [ 276.955952] do_syscall_64+0x38/0x90 [ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.956769] RIP: 0033:0x7f5d3a679222 [ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222 [ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003 [ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000 [ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000 [ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58 [ 276.960536] </TASK> [ 276.961357] Allocated by task 2209: [ 276.961756] kasan_save_stack+0x1e/0x40 [ 276.962170] kasan_set_track+0x21/0x30 [ 276.962557] __kasan_kmalloc+0x7e/0x90 [ 276.962923] __kmalloc+0x5b/0x140 [ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi] [ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi] [ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp] [ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi] [ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi] [ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.965546] netlink_unicast+0x4d5/0x7b0 [ 276.965905] netlink_sendmsg+0x78d/0xc30 [ 276.966236] sock_sendmsg+0xe5/0x120 [ 276.966576] ____sys_sendmsg+0x5fe/0x860 [ 276.966923] ___sys_sendmsg+0xe0/0x170 [ 276.967300] __sys_sendmsg+0xc8/0x170 [ 276.967666] do_syscall_64+0x38/0x90 [ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.968773] Freed by task 2209: [ 276.969111] kasan_save_stack+0x1e/0x40 [ 276.969449] kasan_set_track+0x21/0x30 [ 276.969789] kasan_save_free_info+0x2a/0x50 [ 276.970146] __kasan_slab_free+0x106/0x190 [ 276.970470] __kmem_cache_free+0x133/0x270 [ 276.970816] device_release+0x98/0x210 [ 276.971145] kobject_cleanup+0x101/0x360 [ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi] [ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp] [ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi] [ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.972808] netlink_unicast+0x4d5/0x7b0 [ 276.973201] netlink_sendmsg+0x78d/0xc30 [ 276.973544] sock_sendmsg+0xe5/0x120 [ 276.973864] ____sys_sendmsg+0x5fe/0x860 [ 276.974248] ___sys_sendmsg+0xe0/0x170 [ 276.974583] __sys_sendmsg+0xc8/0x170 [ 276.974891] do_syscall_64+0x38/0x90 [ 276.975216] entry_SYSCALL_64_after_hwframe+0x63/0xcd We can easily reproduce by two tasks: 1. while :; do iscsiadm -m node --login; iscsiadm -m node --logout; done 2. while :; do cat \ /sys/devices/platform/host*/iscsi_host/host*/ipaddress; done iscsid | cat --------------------------------+--------------------------------------- |- iscsi_sw_tcp_session_destroy | |- iscsi_session_teardown | |- device_release | |- iscsi_session_release ||- dev_attr_show |- kfree | |- show_host_param_ | ISCSI_HOST_PARAM_IPADDRESS | |- iscsi_sw_tcp_host_get_param | |- r/w tcp_sw_host->session (UAF) |- iscsi_host_remove | |- iscsi_host_free | Fix the above bug by splitting the session removal into 2 parts: 1. removal from iSCSI class which includes sysfs and removal from host tracking. 2. freeing of session. During iscsi_tcp host and session removal we can remove the session from sysfs then remove the host from sysfs. At this point we know userspace is not accessing the kernel via sysfs so we can free the session and host. Link: https://lore.kernel.org/r/20230117193937.21244-2-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Acked-by: Ding Hui <dinghui@sangfor.com.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [Shivani: The false parameter was not passed to iscsi_host_remove() because, in Linux 5.10.y, the default behavior of iscsi_host_remove() already assumes false.] Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19mm/balloon_compaction: convert balloon_page_delete() to balloon_page_finalize()David Hildenbrand1-27/+16
[ Upstream commit 15504b1163007bbfbd9a63460d5c14737c16e96d ] Let's move the removal of the page from the balloon list into the single caller, to remove the dependency on the PG_isolated flag and clarify locking requirements. Note that for now, balloon_page_delete() was used on two paths: (1) Removing a page from the balloon for deflation through balloon_page_list_dequeue() (2) Removing an isolated page from the balloon for migration in the per-driver migration handlers. Isolated pages were already removed from the balloon list during isolation. So instead of relying on the flag, we can just distinguish both cases directly and handle it accordingly in the caller. We'll shuffle the operations a bit such that they logically make more sense (e.g., remove from the list before clearing flags). In balloon migration functions we can now move the balloon_page_finalize() out of the balloon lock and perform the finalization just before dropping the balloon reference. Document that the page lock is currently required when modifying the movability aspects of a page; hopefully we can soon decouple this from the page lock. Link: https://lkml.kernel.org/r/20250704102524.326966-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brendan Jackman <jackmanb@google.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Eugenio Pé rez <eperezma@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gregory Price <gourry@gourry.net> Cc: Harry Yoo <harry.yoo@oracle.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jason Wang <jasowang@redhat.com> Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: xu xin <xu.xin16@zte.com.cn> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: 0da2ba35c0d5 ("powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19mm/balloon_compaction: make balloon page compaction callbacks staticMiaohe Lin1-22/+0
[ Upstream commit 504c1cabe325df65c18ef38365ddd1a41c6b591b ] Since commit b1123ea6d3b3 ("mm: balloon: use general non-lru movable page feature"), these functions are called via balloon_aops callbacks. They're not called directly outside this file. So make them static and clean up the relevant code. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/20220125132221.2220-1-linmiaohe@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Stable-dep-of: 0da2ba35c0d5 ("powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19tpm: Cap the number of PCR banksJarkko Sakkinen1-3/+6
[ Upstream commit faf07e611dfa464b201223a7253e9dc5ee0f3c9e ] tpm2_get_pcr_allocation() does not cap any upper limit for the number of banks. Cap the limit to eight banks so that out of bounds values coming from external I/O cause on only limited harm. Cc: stable@vger.kernel.org # v5.10+ Fixes: bcfff8384f6c ("tpm: dynamically allocate the allocated_banks array") Tested-by: Lai Yi <yi1.lai@linux.intel.com> Reviewed-by: Jonathan McDowell <noodles@meta.com> Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com> [ added backward-compatible define for TPM_MAX_DIGEST_SIZE to support older ima_init.c code still using that macro name ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19mptcp: pm: ignore unknown endpoint flagsMatthieu Baerts (NGI0)1-0/+1
[ Upstream commit 0ace3297a7301911e52d8195cb1006414897c859 ] Before this patch, the kernel was saving any flags set by the userspace, even unknown ones. This doesn't cause critical issues because the kernel is only looking at specific ones. But on the other hand, endpoints dumps could tell the userspace some recent flags seem to be supported on older kernel versions. Instead, ignore all unknown flags when parsing them. By doing that, the userspace can continue to set unsupported flags, but it has a way to verify what is supported by the kernel. Note that it sounds better to continue accepting unsupported flags not to change the behaviour, but also that eases things on the userspace side by adding "optional" endpoint types only supported by newer kernel versions without having to deal with the different kernel versions. A note for the backports: there will be conflicts in mptcp.h on older versions not having the mentioned flags, the new line should still be added last, and the '5' needs to be adapted to have the same value as the last entry. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-1-9e4781a6c1b8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ GENMASK(5, 0) => GENMASK(2, 0) and applied fix to mptcp_pm_parse_addr() ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19usb: gadget: udc: fix use-after-free in usb_gadget_state_workJimmy Hu1-0/+5
[ Upstream commit baeb66fbd4201d1c4325074e78b1f557dff89b5b ] A race condition during gadget teardown can lead to a use-after-free in usb_gadget_state_work(), as reported by KASAN: BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0 Workqueue: events usb_gadget_state_work The fundamental race occurs because a concurrent event (e.g., an interrupt) can call usb_gadget_set_state() and schedule gadget->work at any time during the cleanup process in usb_del_gadget(). Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after device removal") attempted to fix this by moving flush_work() to after device_del(). However, this does not fully solve the race, as a new work item can still be scheduled *after* flush_work() completes but before the gadget's memory is freed, leading to the same use-after-free. This patch fixes the race condition robustly by introducing a 'teardown' flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is set during cleanup in usb_del_gadget() *before* calling flush_work() to prevent any new work from being scheduled once cleanup has commenced. The scheduling site, usb_gadget_set_state(), now checks this flag under the lock before queueing the work, thus safely closing the race window. Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue") Cc: stable <stable@kernel.org> Signed-off-by: Jimmy Hu <hhhuuu@google.com> Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ Adjust context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19Fonts: Add charcount field to font_descPeilin Ye1-0/+1
commit 4ee573086bd88ff3060dda07873bf755d332e9ba upstream. Subsystems are hard-coding the number of characters of our built-in fonts as 256. Include that information in our kernel font descriptor, `struct font_desc`. Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/65952296d1d9486093bd955d1536f7dcd11112c6.1605169912.git.yepeilin.cs@gmail.com Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19console: Delete unused con_font_copy() callback implementationsPeilin Ye2-2/+1
commit 7a089ec7d77fe7d50f6bb7b178fa25eec9fd822b upstream. Recently in commit 3c4e0dff2095 ("vt: Disable KD_FONT_OP_COPY") we disabled the KD_FONT_OP_COPY ioctl() option. Delete all the con_font_copy() callbacks, since we no longer use them. Mark KD_FONT_OP_COPY as "obsolete" in include/uapi/linux/kd.h, just like what we have done for PPPIOCDETACH in commit af8d3c7c001a ("ppp: remove the PPPIOCDETACH ioctl"). Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/c8d28007edf50de4387e1532eb3eb736db716f73.1605169912.git.yepeilin.cs@gmail.com Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19genalloc.h: fix htmldocs warningAndrew Morton1-0/+1
[ Upstream commit 5393802c94e0ab1295c04c94c57bcb00222d4674 ] WARNING: include/linux/genalloc.h:52 function parameter 'start_addr' not described in 'genpool_algo_t' Fixes: 52fbf1134d47 ("lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lkml.kernel.org/r/20251127130624.563597e3@canb.auug.org.au Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexey Skidanov <alexey.skidanov@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19media: v4l2-mem2mem: Fix outdated documentationLaurent Pinchart1-2/+1
commit 082b86919b7a94de01d849021b4da820a6cb89dc upstream. Commit cbd9463da1b1 ("media: v4l2-mem2mem: Avoid calling .device_run in v4l2_m2m_job_finish") deferred calls to .device_run() to a work queue to avoid recursive calls when a job is finished right away from .device_run(). It failed to update the v4l2_m2m_job_finish() documentation that still states the function must not be called from .device_run(). Fix it. Fixes: cbd9463da1b1 ("media: v4l2-mem2mem: Avoid calling .device_run in v4l2_m2m_job_finish") Cc: stable@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19efi/cper: align ARM CPER type with UEFI 2.9A/2.10 specsMauro Carvalho Chehab1-5/+5
[ Upstream commit 96b010536ee020e716d28d9b359a4bcd18800aeb ] Up to UEFI spec 2.9, the type byte of CPER struct for ARM processor was defined simply as: Type at byte offset 4: - Cache error - TLB Error - Bus Error - Micro-architectural Error All other values are reserved Yet, there was no information about how this would be encoded. Spec 2.9A errata corrected it by defining: - Bit 1 - Cache Error - Bit 2 - TLB Error - Bit 3 - Bus Error - Bit 4 - Micro-architectural Error All other values are reserved That actually aligns with the values already defined on older versions at N.2.4.1. Generic Processor Error Section. Spec 2.10 also preserve the same encoding as 2.9A. Adjust CPER and GHES handling code for both generic and ARM processors to properly handle UEFI 2.9A and 2.10 encoding. Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-information Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19efi/cper: Add a new helper function to print bitmasksMauro Carvalho Chehab1-0/+2
[ Upstream commit a976d790f49499ccaa0f991788ad8ebf92e7fd5c ] Add a helper function to print a string with names associated to each bit field. A typical example is: const char * const bits[] = { "bit 3 name", "bit 4 name", "bit 5 name", }; char str[120]; unsigned int bitmask = BIT(3) | BIT(5); #define MASK GENMASK(5,3) cper_bits_to_str(str, sizeof(str), FIELD_GET(MASK, bitmask), bits, ARRAY_SIZE(bits)); The above code fills string "str" with "bit 3 name|bit 5 name". Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19ALSA: uapi: Fix typo in asound.h commentAndres J Rosa1-1/+1
[ Upstream commit 9a97857db0c5655b8932f86b5d18bb959079b0ee ] Fix 'level-shit' to 'level-shift' in struct snd_cea_861_aud_if comment. Fixes: 7ba1c40b536e ("ALSA: Add definitions for CEA-861 Audio InfoFrames") Signed-off-by: Andres J Rosa <andyrosa@gmail.com> Link: https://patch.msgid.link/20251203162509.1822-1-andyrosa@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19block: fix comment for op_is_zone_mgmt() to include RESET_ALLshechenglong1-4/+1
[ Upstream commit 8a32282175c964eb15638e8dfe199fc13c060f67 ] REQ_OP_ZONE_RESET_ALL is a zone management request, and op_is_zone_mgmt() has returned true for it. Update the comment to remove the misleading exception note so the documentation matches the implementation. Fixes: 12a1c9353c47 ("block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL") Signed-off-by: shechenglong <shechenglong@xfusion.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19fs_context: drop the unused lsm_flags memberOndrej Mosnacek2-2/+1
[ Upstream commit 4e04143c869c5b6d499fbd5083caa860d5c942c3 ] This isn't ever used by VFS now, and it couldn't even work. Any FS that uses the SECURITY_LSM_NATIVE_LABELS flag needs to also process the value returned back from the LSM, so it needs to do its security_sb_set_mnt_opts() call on its own anyway. Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Stable-dep-of: 8675c69816e4 ("NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags") Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-03-27 05:35:42 +0300