| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 6b132759b0fe78e518abafb62190c294100db6d6 upstream.
After mpage_map_and_submit_extent() supports restarting handle if
credits are insufficient during allocating blocks, it is more likely to
exit the current mapping iteration and continue to process the current
processing partially mapped folio again. The existing tracepoints are
not sufficient to track this situation, so enhance the tracepoints to
track the writeback position and the return value before and after
submitting the folios.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1bfe6354e0975fe89c3d25e81b6546d205556a4b upstream.
Since ext4 supports large folios, processing writebacks in pages is no
longer appropriate, it can be modified to process writebacks in bytes.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9f58d3572a8e1ef707b941eae58ec4014b9269d upstream.
If CONFIG_ACPI_SPCR_TABLE is disabled, acpi_parse_spcr()
currently returns 0, which may incorrectly suggest that
SPCR parsing was successful. This patch changes the behavior
to return -ENODEV to clearly indicate that SPCR support
is not available.
This prepares the codebase for future changes that depend
on acpi_parse_spcr() failure detection, such as suppressing
misleading console messages.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20250620131309.126555-2-me@linux.beauty
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0060beec0bfa647c4b510df188b1c4673a197839 upstream.
A port link power management (LPM) policy can be controlled using the
link_power_management_policy sysfs host attribute. However, this
attribute exists also for hosts that do not support LPM and in such
case, attempting to change the LPM policy for the host (port) will fail
with -EOPNOTSUPP.
Introduce the new sysfs link_power_management_supported host attribute
to indicate to the user if a the port and the devices connected to the
port for the host support LPM, which implies that the
link_power_management_policy attribute can be used.
Since checking that a port and its devices support LPM is common between
the new ata_scsi_lpm_supported_show() function and the existing
ata_scsi_lpm_store() function, the new helper ata_scsi_lpm_supported()
is introduced.
Fixes: 413e800cadbf ("ata: libata-sata: Disallow changing LPM state if not supported")
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202507251014.a5becc3b-lkp@intel.com
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f70291411ba20d50008db90a6f0731efac27872c upstream.
In preparation for fixing device mapper zone write handling, introduce
the inline helper function bio_needs_zone_write_plugging() to test if a
BIO requires handling through zone write plugging using the function
blk_zone_plug_bio(). This function returns true for any write
(op_is_write(bio) == true) operation directed at a zoned block device
using zone write plugging, that is, a block device with a disk that has
a zone write plug hash table.
This helper allows simplifying the check on entry to blk_zone_plug_bio()
and used in to protect calls to it for blk-mq devices and DM devices.
Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250625093327.548866-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 42e6c6ce03fd3e41e39a0f93f9b1a1d9fa664338 ]
Currently elevators will record internal 'async_depth' to throttle
asynchronous requests, and they both calculate shallow_dpeth based on
sb->shift, with the respect that sb->shift is the available tags in one
word.
However, sb->shift is not the availbale tags in the last word, see
__map_depth:
if (index == sb->map_nr - 1)
return sb->depth - (index << sb->shift);
For consequence, if the last word is used, more tags can be get than
expected, for example, assume nr_requests=256 and there are four words,
in the worst case if user set nr_requests=32, then the first word is
the last word, and still use bits per word, which is 64, to calculate
async_depth is wrong.
One the ohter hand, due to cgroup qos, bfq can allow only one request
to be allocated, and set shallow_dpeth=1 will still allow the number
of words request to be allocated.
Fix this problems by using shallow_depth to the whole sbitmap instead
of per word, also change kyber, mq-deadline and bfq to follow this,
a new helper __map_depth_with_shallow() is introduced to calculate
available bits in each word.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250807032413.1469456-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4051ead99888f101be92c7ce90d2de09aac6fd1c ]
Syzkaller can create many uhid devices that trigger
repeated warnings like:
"hid-generic xxxx: unknown main item tag 0x0"
These messages can flood the system log, especially if a crash occurs
(e.g., with a slow UART console, leading to soft lockups). To mitigate
this, convert `hid_warn()` to use `dev_warn_ratelimited()`.
This helps reduce log noise and improves system stability under fuzzing
or faulty device scenarios.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03a92f036a04fed2b00d69f5f46f1a486e70dc5c ]
When allocating receive buffers for the vsock virtio RX virtqueue, an
SKB is allocated with a 4140 data payload (the 44-byte packet header +
VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE). Even when factoring in the SKB
overhead, the resulting 8KiB allocation thanks to the rounding in
kmalloc_reserve() is wasteful (~3700 unusable bytes) and results in a
higher-order page allocation on systems with 4KiB pages just for the
sake of a few hundred bytes of packet data.
Limit the vsock virtio RX buffers to 4KiB per SKB, resulting in much
better memory utilisation and removing the need to allocate higher-order
pages entirely.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-5-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31557b3487b349464daf42bc4366153743c1e727 ]
A decade ago commit 6d08acd2d32e ("in6: fix conflict with glibc")
hid the definitions of IPV6 options, because GCC was complaining
about duplicates. The commit did not list the warnings seen, but
trying to recreate them now I think they are (building iproute2):
In file included from ./include/uapi/rdma/rdma_user_cm.h:39,
from rdma.h:16,
from res.h:9,
from res-ctx.c:7:
../include/uapi/linux/in6.h:171:9: warning: ‘IPV6_ADD_MEMBERSHIP’ redefined
171 | #define IPV6_ADD_MEMBERSHIP 20
| ^~~~~~~~~~~~~~~~~~~
In file included from /usr/include/netinet/in.h:37,
from rdma.h:13:
/usr/include/bits/in.h:233:10: note: this is the location of the previous definition
233 | # define IPV6_ADD_MEMBERSHIP IPV6_JOIN_GROUP
| ^~~~~~~~~~~~~~~~~~~
../include/uapi/linux/in6.h:172:9: warning: ‘IPV6_DROP_MEMBERSHIP’ redefined
172 | #define IPV6_DROP_MEMBERSHIP 21
| ^~~~~~~~~~~~~~~~~~~~
/usr/include/bits/in.h:234:10: note: this is the location of the previous definition
234 | # define IPV6_DROP_MEMBERSHIP IPV6_LEAVE_GROUP
| ^~~~~~~~~~~~~~~~~~~~
Compilers don't complain about redefinition if the defines
are identical, but here we have the kernel using the literal
value, and glibc using an indirection (defining to a name
of another define, with the same numerical value).
Problem is, the commit in question hid all the IPV6 socket
options, and glibc has a pretty sparse list. For instance
it lacks Flow Label related options. Willem called this out
in commit 3fb321fde22d ("selftests/net: ipv6 flowlabel"):
/* uapi/glibc weirdness may leave this undefined */
#ifndef IPV6_FLOWINFO
#define IPV6_FLOWINFO 11
#endif
More interestingly some applications (socat) use
a #ifdef IPV6_FLOWINFO to gate compilation of thier
rudimentary flow label support. (For added confusion
socat misspells it as IPV4_FLOWINFO in some places.)
Hide only the two defines we know glibc has a problem
with. If we discover more warnings we can hide more
but we should avoid covering the entire block of
defines for "IPV6 socket options".
Link: https://patch.msgid.link/20250609143933.1654417-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 60a8b1a5d0824afda869f18dc0ecfe72f8dfda42 ]
When CONFIG_VLAN_8021Q=n, a set of stub helpers are used, three of these
helpers use BUG() unconditionally.
This code should not be reached, as callers of these functions should
always check for is_vlan_dev() first, but the usage of BUG() is not
recommended, replace it with WARN_ON() instead.
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250616132626.1749331-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2de1ba0887e5d3bf02d7c212f380039b34e10aa3 ]
Add a stub implementation of is_vlan_dev() that returns false when
VLAN support is not compiled in (CONFIG_VLAN_8021Q=n).
This allows us to compile-out VLAN-dependent dead code when it is not
needed.
This also resolves the following compilation error when:
* CONFIG_VLAN_8021Q=n
* CONFIG_OBJTOOL=y
* CONFIG_OBJTOOL_WERROR=y
drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.o: error: objtool: parse_mirred.isra.0+0x370: mlx5e_tc_act_vlan_add_push_action() missing __noreturn in .c/.h or NORETURN() in noreturns.h
The error occurs because objtool cannot determine that unreachable BUG()
(which doesn't return) calls in VLAN code paths are actually dead code
when VLAN support is disabled.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250616132626.1749331-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4672aec56d2e8edabcb74c3e2320301d106a377e ]
skb_frag_address_safe() needs a check that the
skb_frag_page exists check similar to skb_frag_address().
Cc: ap420073@gmail.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250619175239.3039329-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8bd0af3154b2206ce19f8b1410339f7a2a56d0c3 ]
packing.h uses ARRAY_SIZE(), BUILD_BUG_ON_MSG(), min(), max(), and
sizeof_field() without including the headers where they are defined,
potentially causing build failures.
Fix this in packing.h and sort the result.
Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250624-packing-includes-v1-1-c23c81fab508@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be1ba9ed221ffb95a8bb15f4c83d0694225ba808 ]
If we get to the error path of ieee80211_prep_connection, for example
because of a FW issue, then ieee80211_vif_set_links is called
with 0.
But the call to drv_change_vif_links from ieee80211_vif_update_links
will probably fail as well, for the same reason.
In this case, the valid_links and active_links bitmaps will be reverted
to the value of the failing connection.
Then, in the next connection, due to the logic of
ieee80211_set_vif_links_bitmaps, valid_links will be set to the ID of
the new connection assoc link, but the active_links will remain with the
ID of the old connection's assoc link.
If those IDs are different, we get into a weird state of valid_links and
active_links being different. One of the consequences of this state is
to call drv_change_vif_links with new_links as 0, since the & operation
between the bitmaps will be 0.
Since a removal of a link should always succeed, ignore the return value
of drv_change_vif_links if it was called to only remove links, which is
the case for the ieee80211_prep_connection's error path.
That way, the bitmaps will not be reverted to have the value from the
failing connection and will have 0, so the next connection will have a
good state.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250609213231.ba2011fb435f.Id87ff6dab5e1cf757b54094ac2d714c656165059@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b04716cdcac37bdbacde34def08bc6fdb5fc4e2 ]
When SAE commit is sent and received in response, there's no
ordering for the SAE confirm messages. As such, don't call
drivers to stop listening on the channel when the confirm
message is still expected.
This fixes an issue if the local confirm is transmitted later
than the AP's confirm, for iwlwifi (and possibly mt76) the
AP's confirm would then get lost since the device isn't on
the channel at the time the AP transmit the confirm.
For iwlwifi at least, this also improves the overall timing
of the authentication handshake (by about 15ms according to
the report), likely since the session protection won't be
aborted and rescheduled.
Note that even before this, mgd_complete_tx() wasn't always
called for each call to mgd_prepare_tx() (e.g. in the case
of WEP key shared authentication), and the current drivers
that have the complete callback don't seem to mind. Document
this as well though.
Reported-by: Jan Hendrik Farr <kernel@jfarr.cc>
Closes: https://lore.kernel.org/all/aB30Ea2kRG24LINR@archlinux/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213232.12691580e140.I3f1d3127acabcd58348a110ab11044213cf147d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf8bbaefaa6ae0a07971ea57b3208df60e8ad0a4 ]
Since its inception, the GPU scheduler can leak memory if the driver
calls drm_sched_fini() while there are still jobs in flight.
The simplest way to solve this in a backwards compatible manner is by
adding a new callback, drm_sched_backend_ops.cancel_job(), which
instructs the driver to signal the hardware fence associated with the
job. Afterwards, the scheduler can safely use the established free_job()
callback for freeing the job.
Implement the new backend_ops callback cancel_job().
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/dri-devel/20250418113211.69956-1-tvrtko.ursulin@igalia.com/
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-4-phasta@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14450be2332a49445106403492a367412b8c23f4 ]
Fix a condition that verified valid values of interface types.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.7ad199ca5939.I0ac1ff74798bf59a87a57f2e18f2153c308b119b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 61c3e8940f2d8b5bfeaeec4bedc2f3e7d873abb3 ]
If the decice does not support filtering, filtering
must not be used and all packets delivered for the
upper layers to sort.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250717120649.2090929-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b2a5f2e1c127cb431df22e114998ff72eb4578c8 ]
When the BIS source stops, the controller sends an LE BIG Sync Lost
event (subevent 0x1E). Currently, this event is not handled, causing
the BIS stream to remain active in BlueZ and preventing recovery.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43cf0e05089afe23dac74fa6e1e109d49f2903c4 ]
The events hugepage_set_pmd, hugepage_set_pud, hugepage_update_pmd and
hugepage_update_pud are only called when CONFIG_PPC_BOOK3S_64 is defined.
As each event can take up to 5K regardless if they are used or not, it's
best not to define them when they are not used. Add #ifdef around these
events when they are not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/20250612101259.0ad43e48@batman.local.home
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 775f5729b47d8737f4f98e0141f61b3358245398 ]
Zero is a valid SDCA IRQ interrupt position so add a special value to
indicate that the IRQ is not used.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52565a935213cd6a8662ddb8efe5b4219343a25d ]
syzbot found a race condition when kcm_unattach(psock)
and kcm_release(kcm) are executed at the same time.
kcm_unattach() is missing a check of the flag
kcm->tx_stopped before calling queue_work().
If the kcm has a reserved psock, kcm_unattach() might get executed
between cancel_work_sync() and unreserve_psock() in kcm_release(),
requeuing kcm->tx_work right before kcm gets freed in kcm_done().
Remove kcm->tx_stopped and replace it by the less
error-prone disable_work_sync().
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+e62c9db591c30e174662@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e62c9db591c30e174662
Reported-by: syzbot+d199b52665b6c3069b94@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d199b52665b6c3069b94
Reported-by: syzbot+be6b1fdfeae512726b4e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=be6b1fdfeae512726b4e
Signed-off-by: Sven Stegemann <sven@stegemann.de>
Link: https://patch.msgid.link/20250812191810.27777-1-sven@stegemann.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c0a23bbc98e93704a1f4fb5e7e7bb2d7c0fb6eb3 ]
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a89197589c ("kthread: Default affine kthread to its preferred NUMA node")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 64fdaa94bfe0cca3a0f4b2dd922486c5f59fe678 ]
Page pool can have pages "directly" (locklessly) recycled to it,
if the NAPI that owns the page pool is scheduled to run on the same CPU.
To make this safe we check that the NAPI is disabled while we destroy
the page pool. In most cases NAPI and page pool lifetimes are tied
together so this happens naturally.
The queue API expects the following order of calls:
-> mem_alloc
alloc new pp
-> stop
napi_disable
-> start
napi_enable
-> mem_free
free old pp
Here we allocate the page pool in ->mem_alloc and free in ->mem_free.
But the NAPIs are only stopped between ->stop and ->start. We created
page_pool_disable_direct_recycling() to safely shut down the recycling
in ->stop. This way the page_pool_destroy() call in ->mem_free doesn't
have to worry about recycling any more.
Unfortunately, the page_pool_disable_direct_recycling() is not enough
to deal with failures which necessitate freeing the _new_ page pool.
If we hit a failure in ->mem_alloc or ->stop the new page pool has
to be freed while the NAPI is active (assuming driver attaches the
page pool to an existing NAPI instance and doesn't reallocate NAPIs).
Freeing the new page pool is technically safe because it hasn't been
used for any packets, yet, so there can be no recycling. But the check
in napi_assert_will_not_race() has no way of knowing that. We could
check if page pool is empty but that'd make the check much less likely
to trigger during development.
Add page_pool_enable_direct_recycling(), pairing with
page_pool_disable_direct_recycling(). It will allow us to create the new
page pools in "disabled" state and only enable recycling when we know
the reconfig operation will not fail.
Coincidentally it will also let us re-enable the recycling for the old
pool, if the reconfig failed:
-> mem_alloc (new)
-> stop (old)
# disables direct recycling for old
-> start (new)
# fail!!
-> start (old)
# go back to old pp but direct recycling is lost :(
-> mem_free (new)
The new helper is idempotent to make the life easier for drivers,
which can operate in HDS mode and support zero-copy Rx.
The driver can call the helper twice whether there are two pools
or it has multiple references to a single pool.
Fixes: 40eca00ae605 ("bnxt_en: unlink page pool when stopping Rx queue")
Tested-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250805003654.2944974-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cce35103135c7ffc7bebc32ebfc74fe1f2c3cb5d upstream.
In mt_perf_to_adistance(), the calculation of abstract distance (adist)
involves multiplying several int values including
MEMTIER_ADISTANCE_DRAM.
*adist = MEMTIER_ADISTANCE_DRAM *
(perf->read_latency + perf->write_latency) /
(default_dram_perf.read_latency + default_dram_perf.write_latency) *
(default_dram_perf.read_bandwidth + default_dram_perf.write_bandwidth) /
(perf->read_bandwidth + perf->write_bandwidth);
Since these values can be large, the multiplication may exceed the
maximum value of an int (INT_MAX) and overflow (Our platform did),
leading to an incorrect adist.
User-visible impact:
The memory tiering subsystem will misinterpret slow memory (like CXL)
as faster than DRAM, causing inappropriate demotion of pages from
CXL (slow memory) to DRAM (fast memory).
For example, we will see the following demotion chains from the dmesg, where
Node0,1 are DRAM, and Node2,3 are CXL node:
Demotion targets for Node 0: null
Demotion targets for Node 1: null
Demotion targets for Node 2: preferred: 0-1, fallback: 0-1
Demotion targets for Node 3: preferred: 0-1, fallback: 0-1
Change MEMTIER_ADISTANCE_DRAM to be a long constant by writing it with
the 'L' suffix. This prevents the overflow because the multiplication
will then be done in the long type which has a larger range.
Link: https://lkml.kernel.org/r/20250611023439.2845785-1-lizhijian@fujitsu.com
Link: https://lkml.kernel.org/r/20250610062751.2365436-1-lizhijian@fujitsu.com
Fixes: 3718c02dbd4c ("acpi, hmat: calculate abstract distance with HMAT")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3f66ccbaaef3a0c5bd844eab04e3207b4061c546 upstream.
REQ_OP_ZONE_FINISH is defined as "12", which makes
op_is_write(REQ_OP_ZONE_FINISH) return false, despite the fact that a
zone finish operation is an operation that modifies a zone (transition
it to full) and so should be considered as a write operation (albeit
one that does not transfer any data to the device).
Fix this by redefining REQ_OP_ZONE_FINISH to be an odd number (13), and
redefine REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL using sequential
odd numbers from that new value.
Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250625093327.548866-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6cff20ce3b92ffbf2fc5eb9e5a030b3672aa414a upstream.
pci_bridge_d3_possible() is called from both pcie_portdrv_probe() and
pcie_portdrv_remove() to determine whether runtime power management shall
be enabled (on probe) or disabled (on remove) on a PCIe port.
The underlying assumption is that pci_bridge_d3_possible() always returns
the same value, else a runtime PM reference imbalance would occur. That
assumption is not given if the PCIe port is inaccessible on remove due to
hot-unplug: pci_bridge_d3_possible() calls pciehp_is_native(), which
accesses Config Space to determine whether the port is Hot-Plug Capable.
An inaccessible port returns "all ones", which is converted to "all
zeroes" by pcie_capability_read_dword(). Hence the port no longer seems
Hot-Plug Capable on remove even though it was on probe.
The resulting runtime PM ref imbalance causes warning messages such as:
pcieport 0000:02:04.0: Runtime PM usage count underflow!
Avoid the Config Space access (and thus the runtime PM ref imbalance) by
caching the Hot-Plug Capable bit in struct pci_dev.
The struct already contains an "is_hotplug_bridge" flag, which however is
not only set on Hot-Plug Capable PCIe ports, but also Conventional PCI
Hot-Plug bridges and ACPI slots. The flag identifies bridges which are
allocated additional MMIO and bus number resources to allow for hierarchy
expansion.
The kernel is somewhat sloppily using "is_hotplug_bridge" in a number of
places to identify Hot-Plug Capable PCIe ports, even though the flag
encompasses other devices. Subsequent commits replace these occurrences
with the new flag to clearly delineate Hot-Plug Capable PCIe ports from
other kinds of hotplug bridges.
Document the existing "is_hotplug_bridge" and the new "is_pciehp" flag
and document the (non-obvious) requirement that pci_bridge_d3_possible()
always returns the same value across the entire lifetime of a bridge,
including its hot-removal.
Fixes: 5352a44a561d ("PCI: pciehp: Make pciehp_is_native() stricter")
Reported-by: Laurent Bigonville <bigon@bigon.be>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220216
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Closes: https://lore.kernel.org/r/20250609020223.269407-3-superm1@kernel.org/
Link: https://lore.kernel.org/all/20250620025535.3425049-3-superm1@kernel.org/T/#u
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: stable@vger.kernel.org # v4.18+
Link: https://patch.msgid.link/fe5dcc3b2e62ee1df7905d746bde161eb1b3291c.1752390101.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a02fd05661d73a8507dd70dd820e9b984490c545 upstream.
Like s390 and the jailhouse hypervisor, LoongArch's PCI architecture allows
passing isolated PCI functions to a guest OS instance. So it is possible
that there is a multi-function device without function 0 for the host or
guest.
Allow probing such functions by adding a IS_ENABLED(CONFIG_LOONGARCH) case
in the hypervisor_isolated_pci_functions() helper.
This is similar to commit 189c6c33ff42 ("PCI: Extend isolated function
probing to s390").
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250624062927.4037734-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cf73d9970ea4f8cace5d8f02d2565a2723003112 upstream.
__kernel_rwf_t is defined as int, the actual size of which is
implementation defined. It won't go well if some compiler / archs
ever defines it as i64, so replace it with __u32, hoping that
there is no one using i16 for it.
Cc: stable@vger.kernel.org
Fixes: 2b188cc1bb857 ("Add io_uring IO interface")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/47c666c4ee1df2018863af3a2028af18feef11ed.1751412511.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9bbffee67ffd16360179327b57f3b1245579ef08 upstream.
By inducing delays in the right places, Jann Horn created a reproducer for
a hard to hit UAF issue that became possible after VMAs were allowed to be
recycled by adding SLAB_TYPESAFE_BY_RCU to their cache.
Race description is borrowed from Jann's discovery report:
lock_vma_under_rcu() looks up a VMA locklessly with mas_walk() under
rcu_read_lock(). At that point, the VMA may be concurrently freed, and it
can be recycled by another process. vma_start_read() then increments the
vma->vm_refcnt (if it is in an acceptable range), and if this succeeds,
vma_start_read() can return a recycled VMA.
In this scenario where the VMA has been recycled, lock_vma_under_rcu()
will then detect the mismatching ->vm_mm pointer and drop the VMA through
vma_end_read(), which calls vma_refcount_put(). vma_refcount_put() drops
the refcount and then calls rcuwait_wake_up() using a copy of vma->vm_mm.
This is wrong: It implicitly assumes that the caller is keeping the VMA's
mm alive, but in this scenario the caller has no relation to the VMA's mm,
so the rcuwait_wake_up() can cause UAF.
The diagram depicting the race:
T1 T2 T3
== == ==
lock_vma_under_rcu
mas_walk
<VMA gets removed from mm>
mmap
<the same VMA is reallocated>
vma_start_read
__refcount_inc_not_zero_limited_acquire
munmap
__vma_enter_locked
refcount_add_not_zero
vma_end_read
vma_refcount_put
__refcount_dec_and_test
rcuwait_wait_event
<finish operation>
rcuwait_wake_up [UAF]
Note that rcuwait_wait_event() in T3 does not block because refcount was
already dropped by T1. At this point T3 can exit and free the mm causing
UAF in T1.
To avoid this we move vma->vm_mm verification into vma_start_read() and
grab vma->vm_mm to stabilize it before vma_refcount_put() operation.
[surenb@google.com: v3]
Link: https://lkml.kernel.org/r/20250729145709.2731370-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250728175355.2282375-1-surenb@google.com
Fixes: 3104138517fc ("mm: make vma cache SLAB_TYPESAFE_BY_RCU")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/all/CAG48ez0-deFbVH=E3jbkWx=X3uVbd8nWeo6kbJPQ0KoUD+m2tA@mail.gmail.com/
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d9cfc9b8cb17dbc29a98792d36ec39a1cf1395f upstream.
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link
up and down events when the WWAN interface is activated on the modem-side.
Interrupt URBs will in consecutive polls grab:
* Link Connected
* Link Disconnected
* Link Connected
Where the last Connected is then a stable link state.
When the system is under load this may cause the unlink_urbs() work in
__handle_link_change() to not complete before the next usbnet_link_change()
call turns the carrier on again, allowing rx_submit() to queue new SKBs.
In that event the URB queue is filled faster than it can drain, ending up
in a RCU stall:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
Call trace:
arch_local_irq_enable+0x4/0x8
local_bh_enable+0x18/0x20
__netdev_alloc_skb+0x18c/0x1cc
rx_submit+0x68/0x1f8 [usbnet]
rx_alloc_submit+0x4c/0x74 [usbnet]
usbnet_bh+0x1d8/0x218 [usbnet]
usbnet_bh_tasklet+0x10/0x18 [usbnet]
tasklet_action_common+0xa8/0x110
tasklet_action+0x2c/0x34
handle_softirqs+0x2cc/0x3a0
__do_softirq+0x10/0x18
____do_softirq+0xc/0x14
call_on_irq_stack+0x24/0x34
do_softirq_own_stack+0x18/0x20
__irq_exit_rcu+0xa8/0xb8
irq_exit_rcu+0xc/0x30
el1_interrupt+0x34/0x48
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x38/0x48
xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd]
unlink1+0xd4/0xdc [usbcore]
usb_hcd_unlink_urb+0x70/0xb0 [usbcore]
usb_unlink_urb+0x24/0x44 [usbcore]
unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet]
__handle_link_change+0x34/0x70 [usbnet]
usbnet_deferred_kevent+0x1c0/0x320 [usbnet]
process_scheduled_works+0x2d0/0x48c
worker_thread+0x150/0x1dc
kthread+0xd8/0xe8
ret_from_fork+0x10/0x20
Get around the problem by delaying the carrier on to the scheduled work.
This needs a new flag to keep track of the necessary action.
The carrier ok check cannot be removed as it remains required for the
LINK_RESET event flow.
Fixes: 4b49f58fff00 ("usbnet: handle link change")
Cc: stable@vger.kernel.org
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d46e51f1c78b9ab9323610feb14238d06d46d519 ]
When sending a packet with virtio_net_hdr to tun device, if the gso_type
in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr
size, below crash may happen.
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:4572!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 62 Comm: mytest Not tainted 6.16.0-rc7 #203 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:skb_pull_rcsum+0x8e/0xa0
Code: 00 00 5b c3 cc cc cc cc 8b 93 88 00 00 00 f7 da e8 37 44 38 00 f7 d8 89 83 88 00 00 00 48 8b 83 c8 00 00 00 5b c3 cc cc cc cc <0f> 0b 0f 0b 66 66 2e 0f 1f 84 00 000
RSP: 0018:ffffc900001fba38 EFLAGS: 00000297
RAX: 0000000000000004 RBX: ffff8880040c1000 RCX: ffffc900001fb948
RDX: ffff888003e6d700 RSI: 0000000000000008 RDI: ffff88800411a062
RBP: ffff8880040c1000 R08: 0000000000000000 R09: 0000000000000001
R10: ffff888003606c00 R11: 0000000000000001 R12: 0000000000000000
R13: ffff888004060900 R14: ffff888004050000 R15: ffff888004060900
FS: 000000002406d3c0(0000) GS:ffff888084a19000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000040 CR3: 0000000004007000 CR4: 00000000000006f0
Call Trace:
<TASK>
udp_queue_rcv_one_skb+0x176/0x4b0 net/ipv4/udp.c:2445
udp_queue_rcv_skb+0x155/0x1f0 net/ipv4/udp.c:2475
udp_unicast_rcv_skb+0x71/0x90 net/ipv4/udp.c:2626
__udp4_lib_rcv+0x433/0xb00 net/ipv4/udp.c:2690
ip_protocol_deliver_rcu+0xa6/0x160 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x72/0x90 net/ipv4/ip_input.c:233
ip_sublist_rcv_finish+0x5f/0x70 net/ipv4/ip_input.c:579
ip_sublist_rcv+0x122/0x1b0 net/ipv4/ip_input.c:636
ip_list_rcv+0xf7/0x130 net/ipv4/ip_input.c:670
__netif_receive_skb_list_core+0x21d/0x240 net/core/dev.c:6067
netif_receive_skb_list_internal+0x186/0x2b0 net/core/dev.c:6210
napi_complete_done+0x78/0x180 net/core/dev.c:6580
tun_get_user+0xa63/0x1120 drivers/net/tun.c:1909
tun_chr_write_iter+0x65/0xb0 drivers/net/tun.c:1984
vfs_write+0x300/0x420 fs/read_write.c:593
ksys_write+0x60/0xd0 fs/read_write.c:686
do_syscall_64+0x50/0x1c0 arch/x86/entry/syscall_64.c:63
</TASK>
To trigger gso segment in udp_queue_rcv_skb(), we should also set option
UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv
hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try
to pull udphdr, but the skb size has been segmented to gso size, which
leads to this crash.
Previous commit cf329aa42b66 ("udp: cope with UDP GRO packet misdirection")
introduces segmentation in UDP receive path only for GRO, which was never
intended to be used for UFO, so drop UFO packets in udp_rcv_segment().
Link: https://lore.kernel.org/netdev/20250724083005.3918375-1-wangliang74@huawei.com/
Link: https://lore.kernel.org/netdev/20250729123907.3318425-1-wangliang74@huawei.com/
Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250730101458.3470788-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d45cf1e7d7180256e17c9ce88e32e8061a7887fe ]
syzbot was able to craft a packet with very long IPv6 extension headers
leading to an overflow of skb->transport_header.
This 16bit field has a limited range.
Add skb_reset_transport_header_careful() helper and use it
from ipv6_gso_segment()
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Modules linked in:
CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Call Trace:
<TASK>
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
__skb_gso_segment+0x342/0x510 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950
validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000
sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329
__dev_xmit_skb net/core/dev.c:4102 [inline]
__dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679
Fixes: d1da932ed4ec ("ipv6: Separate ipv6 offload support")
Reported-by: syzbot+af43e647fd835acc02df@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/688a1a05.050a0220.5d226.0008.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250730131738.3385939-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9843cf7b6fd6f938c16fde51e86dd0e3ddbefb12 ]
The step for TLV on tas2781, should be 50 (-0.5dB).
Fixes: 678f38eba1f2 ("ASoC: tas2781: Add Header file for tas2781 driver")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250801021618.64627-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2ba58ccc9099514380c3300cbc0750b5055fc1c ]
Upstream commit 53889bcaf536 ("block: make __get_task_ioprio() easier to
read") changes the IO priority returned to the caller if no IO context
is defined for the task. Prior to this commit, the returned IO priority
was determined by task_nice_ioclass() and task_nice_ioprio(). Now it is
always IOPRIO_DEFAULT, which translates to IOPRIO_CLASS_NONE with priority
0. However, task_nice_ioclass() returns IOPRIO_CLASS_IDLE, IOPRIO_CLASS_RT,
or IOPRIO_CLASS_BE depending on the task scheduling policy, and
task_nice_ioprio() returns a value determined by task_nice(). This causes
regressions in test code checking the IO priority and class of IO
operations on tasks with no IO context.
Fix the problem by returning the IO priority calculated from
task_nice_ioclass() and task_nice_ioprio() if no IO context is defined
to match earlier behavior.
Fixes: 53889bcaf536 ("block: make __get_task_ioprio() easier to read")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250731044953.1852690-1-linux@roeck-us.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 82a0302e7167d0b7c6cde56613db3748f8dd806d ]
Remove comment for reorder_work which no longer exists.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 71203f68c774 ("padata: Fix pd UAF once and for all")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 86624ba3b522b6512def25534341da93356c8da4 ]
This was missed during the initial implementation. The VFIO PCI encodes
the vf_token inside the device name when opening the device from the group
FD, something like:
"0000:04:10.0 vf_token=bd8d9d2b-5a5f-4f5a-a211-f591514ba1f3"
This is used to control access to a VF unless there is co-ordination with
the owner of the PF.
Since we no longer have a device name in the cdev path, pass the token
directly through VFIO_DEVICE_BIND_IOMMUFD using an optional field
indicated by VFIO_DEVICE_BIND_FLAG_TOKEN.
Fixes: 5fcc26969a16 ("vfio: Add VFIO_DEVICE_BIND_IOMMUFD")
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v3-bdd8716e85fe+3978a-vfio_token_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bdc877ba6b7ff1b6d2ebeff11e63da4a50a54854 ]
The moduleparam code allows modules to provide their own definition of
MODULE_PARAM_PREFIX, instead of using the default KBUILD_MODNAME ".".
Commit 730b69d22525 ("module: check kernel param length at compile time,
not runtime") added a check to ensure the prefix doesn't exceed
MODULE_NAME_LEN, as this is what param_sysfs_builtin() expects.
Later, commit 58f86cc89c33 ("VERIFY_OCTAL_PERMISSIONS: stricter checking
for sysfs perms.") removed this check, but there is no indication this was
intentional.
Since the check is still useful for param_sysfs_builtin() to function
properly, reintroduce it in __module_param_call(), but in a modernized form
using static_assert().
While here, clean up the __module_param_call() comments. In particular,
remove the comment "Default value instead of permissions?", which comes
from commit 9774a1f54f17 ("[PATCH] Compile-time check re world-writeable
module params"). This comment was related to the test variable
__param_perm_check_##name, which was removed in the previously mentioned
commit 58f86cc89c33.
Fixes: 58f86cc89c33 ("VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-4-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5523a466e905b6287b94654ddb364536f2f948cf ]
When CONFIG_I3C is disabled and the i3c_i2c_driver_register() happens
to not be inlined, any driver calling it still references the i3c_driver
instance, which then causes a link failure:
x86_64-linux-ld: drivers/hwmon/lm75.o: in function `lm75_i3c_reg_read':
lm75.c:(.text+0xc61): undefined reference to `i3cdev_to_dev'
x86_64-linux-ld: lm75.c:(.text+0xd25): undefined reference to `i3c_device_do_priv_xfers'
x86_64-linux-ld: lm75.c:(.text+0xdd8): undefined reference to `i3c_device_do_priv_xfers'
This issue was part of the original i3c code, but only now caused problems
when i3c support got added to lm75.
Change the 'inline' annotations in the header to '__always_inline' to
ensure that the dead-code-elimination pass in the compiler can optimize
it out as intended.
Fixes: 6071d10413ff ("hwmon: (lm75) add I3C support for P3T1755")
Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250725090609.2456262-1-arnd@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d9896e9f6d02d8aa85e63f736871f96c59a5263 ]
Since commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"),
the vhost uses vhost_task and operates as a child of the
owner thread. This is required for correct CPU usage accounting,
especially when using containers.
However, this change has caused confusion for some legacy
userspace applications, and we didn't notice until it's too late.
Unfortunately, it's too late to revert - we now have userspace
depending both on old and new behaviour :(
To address the issue, reintroduce kthread mode for vhost workers and
provide a configuration to select between kthread and task worker.
- Add 'fork_owner' parameter to vhost_dev to let users select kthread
or task mode. Default mode is task mode(VHOST_FORK_OWNER_TASK).
- Reintroduce kthread mode support:
* Bring back the original vhost_worker() implementation,
and renamed to vhost_run_work_kthread_list().
* Add cgroup support for the kthread
* Introduce struct vhost_worker_ops:
- Encapsulates create / stop / wake‑up callbacks.
- vhost_worker_create() selects the proper ops according to
inherit_owner.
- Userspace configuration interface:
* New IOCTLs:
- VHOST_SET_FORK_FROM_OWNER lets userspace select task mode
(VHOST_FORK_OWNER_TASK) or kthread mode (VHOST_FORK_OWNER_KTHREAD)
- VHOST_GET_FORK_FROM_OWNER reads the current worker mode
* Expose module parameter 'fork_from_owner_default' to allow system
administrators to configure the default mode for vhost workers
* Kconfig option CONFIG_VHOST_ENABLE_FORK_OWNER_CONTROL controls whether
these IOCTLs and the parameter are available
- The VHOST_NEW_WORKER functionality requires fork_owner to be set
to true, with validation added to ensure proper configuration
This partially reverts or improves upon:
commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
commit 1cdaafa1b8b4 ("vhost: replace single worker pointer with xarray")
Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"),
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20250714071333.59794-2-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit abad3d0bad72a52137e0c350c59542d75ae4f513 ]
Lonial reported that an out-of-bounds access in cgroup local storage
can be crafted via tail calls. Given two programs each utilizing a
cgroup local storage with a different value size, and one program
doing a tail call into the other. The verifier will validate each of
the indivial programs just fine. However, in the runtime context
the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the
BPF program as well as any cgroup local storage flavor the program
uses. Helpers such as bpf_get_local_storage() pick this up from the
runtime context:
ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx);
storage = ctx->prog_item->cgroup_storage[stype];
if (stype == BPF_CGROUP_STORAGE_SHARED)
ptr = &READ_ONCE(storage->buf)->data[0];
else
ptr = this_cpu_ptr(storage->percpu_buf);
For the second program which was called from the originally attached
one, this means bpf_get_local_storage() will pick up the former
program's map, not its own. With mismatching sizes, this can result
in an unintended out-of-bounds access.
To fix this issue, we need to extend bpf_map_owner with an array of
storage_cookie[] to match on i) the exact maps from the original
program if the second program was using bpf_get_local_storage(), or
ii) allow the tail call combination if the second program was not
using any of the cgroup local storage maps.
Fixes: 7d9c3427894f ("bpf: Make cgroup storages shared between programs on the same cgroup")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9621e60f59eae87eb9ffe88d90f24f391a1ef0f0 ]
Move them into bpf.h given we also need them in core code.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: abad3d0bad72 ("bpf: Fix oob access in cgroup local storage")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd1c98f0ef5cbcec842209776505d9e70d8fcd53 ]
Given this is only relevant for BPF tail call maps, it is adding up space
and penalizing other map types. We also need to extend this with further
objects to track / compare to. Therefore, lets move this out into a separate
structure and dynamically allocate it only for BPF tail call maps.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: abad3d0bad72 ("bpf: Fix oob access in cgroup local storage")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 12df58ad294253ac1d8df0c9bb9cf726397a671d ]
Add a cookie to BPF maps to uniquely identify BPF maps for the timespan
when the node is up. This is different to comparing a pointer or BPF map
id which could get rolled over and reused.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: abad3d0bad72 ("bpf: Fix oob access in cgroup local storage")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
et.al
[ Upstream commit ff7ec8dc1b646296f8d94c39339e8d3833d16c05 ]
Check pde->proc_ops->proc_lseek directly may cause UAF in rmmod scenario.
It's a gap in proc_reg_open() after commit 654b33ada4ab("proc: fix UAF in
proc_get_inode()"). Followed by AI Viro's suggestion, fix it in same
manner.
Link: https://lkml.kernel.org/r/20250607021353.1127963-1-wangzijie1@honor.com
Fixes: 3f61631d47f1 ("take care to handle NULL ->proc_lseek()")
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98269398c02ab20eb9ed6d77416023a2627049d8 ]
The call to rdma_uattrs_has_raw_cap() is placed in mlx5 fs.c file,
which is compiled without relation to CONFIG_INFINIBAND_USER_ACCESS.
Despite the check is used only in flows with CONFIG_INFINIBAND_USER_ACCESS=y|m,
the compilers generate the following error for CONFIG_INFINIBAND_USER_ACCESS=n
builds.
>> ERROR: modpost: "rdma_uattrs_has_raw_cap" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined!
Fixes: f458ccd2aa2c ("RDMA/uverbs: Check CAP_NET_RAW in user namespace for flow create")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507080725.bh7xrhpg-lkp@intel.com/
Link: https://patch.msgid.link/72dee6b379bd709255a5d8e8010b576d50e47170.1751967071.git.leon@kernel.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f458ccd2aa2c5a6f0129a9b1548f2825071fdc6b ]
Currently, the capability check is done in the default
init_user_ns user namespace. When a process runs in a
non default user namespace, such check fails. Due to this
when a process is running using Podman, it fails to create
the flow resource.
Since the RDMA device is a resource within a network namespace,
use the network namespace associated with the RDMA device to
determine its owning user namespace.
Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://patch.msgid.link/6df6f2f24627874c4f6d041c19dc1f6f29f68f84.1750963874.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f1208b05574f63c52e88109d8c75afdf4fc6bf42 ]
Use the net namespace of the underlying rdma device.
After honoring the rdma device's namespace, the ipoib
netdev now also runs in the same net namespace of the
rdma device.
Add an API to read the net namespace of the rdma device
so that ULP such as IPoIB can use it to initialize its
netdev.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Stable-dep-of: f458ccd2aa2c ("RDMA/uverbs: Check CAP_NET_RAW in user namespace for flow create")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e2b7fcd3f075ff8c5b0e4474fe145d1c685f54f ]
Ensure that drivers that have not been converted to the ahash API
do not use the ahash_request_set_virt fallback path as they cannot
use the software fallback.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 9d7a0ab1c753 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ccd065a69df163cd9fe0dd8e0f609f1eeb4723d ]
Some drivers cannot have a fallback, e.g., because the key is held
in hardware. Allow these to be used with ahash by adding the bit
CRYPTO_ALG_NO_FALLBACK.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Stable-dep-of: 1e2b7fcd3f07 ("crypto: ahash - Stop legacy tfms from using the set_virt fallback path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
