| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Last argument in effective_prot() is u64 assuming pxd_val() returned value
(all page table levels) is 64 bit. pxd_val() is very platform specific
and its type should not be assumed in generic MM.
Split effective_prot() into individual page table level specific callbacks
which accepts corresponding pxd_t argument instead and then the
subscribing platform (only x86) just derive pxd_val() from the entries as
required and proceed as earlier.
Link: https://lkml.kernel.org/r/20250407053113.746295-3-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/ptdump: Drop assumption that pxd_val() is u64", v2.
Last argument passed down in note_page() is u64 assuming pxd_val()
returned value (all page table levels) is 64 bit - which might not be the
case going ahead when D128 page tables is enabled on arm64 platform.
Besides pxd_val() is very platform specific and its type should not be
assumed in generic MM. A similar problem exists for effective_prot(),
although it is restricted to x86 platform.
This series splits note_page() and effective_prot() into individual page
table level specific callbacks which accepts corresponding pxd_t page
table entry as an argument instead and later on all subscribing platforms
could derive pxd_val() from the table entries as required and proceed as
before.
Define ptdesc_t type which describes the basic page table descriptor
layout on arm64 platform. Subsequently all level specific pxxval_t
descriptors are derived from ptdesc_t thus establishing a common original
format, which can also be appropriate for page table entries, masks and
protection values etc which are used at all page table levels.
This patch (of 3):
Last argument passed down in note_page() is u64 assuming pxd_val()
returned value (all page table levels) is 64 bit - which might not be the
case going ahead when D128 page tables is enabled on arm64 platform.
Besides pxd_val() is very platform specific and its type should not be
assumed in generic MM.
Split note_page() into individual page table level specific callbacks
which accepts corresponding pxd_t argument instead and then subscribing
platforms just derive pxd_val() from the entries as required and proceed
as earlier.
Also add a note_page_flush() callback for flushing the last page table
page that was being handled earlier via level = -1.
Link: https://lkml.kernel.org/r/20250407053113.746295-1-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/20250407053113.746295-2-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
uprobe_write_opcode()
We already have the VMA, no need to look it up using
get_user_page_vma_remote(). We can now switch to get_user_pages_remote().
Link: https://lkml.kernel.org/r/20250321113713.204682-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Namhyung kim <namhyung@kernel.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: tongtiangen <tongtiangen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix parameter passed to page_mapcount_is_type()", v2.
Found by code inspection. There are two places where the parameter passed
to page_mapcount_is_type() is (page->_mapcount), which is incorrect since
it should be one more than the value, as explained in the comments to
page_mapcount_is_type(): (a) page_has_type() in page-flags.h (b)
__dump_folio() in mm/debug.c
PATCH[1] fixes the parameter for (a)
PATCH[2] fixes the parameter for (b)
Note that the issue doesn't cause any visible impacts due to the safety
gap introduced by PGTY_mapcount_underflow limit. So the tag 'Cc:
stable@vger.kernel.org' isn't needed.
This patch (of 2):
As the comments of page_mapcount_is_type() indicate, the parameter passed
to the function should be one more than page->_mapcount. However,
page->_mapcount (equivalent to page->page_type) is passed to the function
by commit 4ffca5a96678 ("mm: support only one page_type per page")
page_type_has_type() is replaced by page_mapcount_is_type(), but the
parameter isn't adjusted.
Fix it by replacing page_mapcount_is_type() with page_type_has_type() in
page_has_type(). Note that the issue doesn't cause any visible impacts
due to the safety gap introduced by PGTY_mapcount_underflow limit.
Link: https://lkml.kernel.org/r/20250321120222.1456770-1-gshan@redhat.com
Link: https://lkml.kernel.org/r/20250321120222.1456770-2-gshan@redhat.com
Fixes: 4ffca5a96678 ("mm: support only one page_type per page")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: gehao <gehao@kylinos.cn>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard
regions", v2.
Introduce the PAGE_IS_GUARD flag in the PAGEMAP_SCAN ioctl to expose
information about guard regions. This allows userspace tools, such as
CRIU, to detect and handle guard regions.
Currently, CRIU utilizes PAGEMAP_SCAN as a more efficient alternative to
parsing /proc/pid/pagemap. Without this change, guard regions are
incorrectly reported as swap-anon regions, leading CRIU to attempt dumping
them and subsequently failing.
The series includes updates to the documentation and selftests to reflect
the new functionality.
This patch (of 3):
Introduce the PAGE_IS_GUARD flag in the PAGEMAP_SCAN ioctl to expose
information about guard regions. This allows userspace tools, such as
CRIU, to detect and handle guard regions.
Link: https://lkml.kernel.org/r/20250324065328.107678-1-avagin@google.com
Link: https://lkml.kernel.org/r/20250324065328.107678-2-avagin@google.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PTRACE_SET_SYSCALL_INFO is a generic ptrace API that complements
PTRACE_GET_SYSCALL_INFO by letting the ptracer modify details of system
calls the tracee is blocked in.
This API allows ptracers to obtain and modify system call details in a
straightforward and architecture-agnostic way, providing a consistent way
of manipulating the system call number and arguments across architectures.
As in case of PTRACE_GET_SYSCALL_INFO, PTRACE_SET_SYSCALL_INFO also does
not aim to address numerous architecture-specific system call ABI
peculiarities, like differences in the number of system call arguments for
such system calls as pread64 and preadv.
The current implementation supports changing only those bits of system
call information that are used by strace system call tampering, namely,
syscall number, syscall arguments, and syscall return value.
Support of changing additional details returned by
PTRACE_GET_SYSCALL_INFO, such as instruction pointer and stack pointer,
could be added later if needed, by using struct ptrace_syscall_info.flags
to specify the additional details that should be set. Currently, "flags"
and "reserved" fields of struct ptrace_syscall_info must be initialized
with zeroes; "arch", "instruction_pointer", and "stack_pointer" fields are
currently ignored.
PTRACE_SET_SYSCALL_INFO currently supports only PTRACE_SYSCALL_INFO_ENTRY,
PTRACE_SYSCALL_INFO_EXIT, and PTRACE_SYSCALL_INFO_SECCOMP operations.
Other operations could be added later if needed.
Ideally, PTRACE_SET_SYSCALL_INFO should have been introduced along with
PTRACE_GET_SYSCALL_INFO, but it didn't happen. The last straw that
convinced me to implement PTRACE_SET_SYSCALL_INFO was apparent failure to
provide an API of changing the first system call argument on riscv
architecture.
ptrace(2) man page:
long ptrace(enum __ptrace_request request, pid_t pid, void *addr, void *data);
...
PTRACE_SET_SYSCALL_INFO
Modify information about the system call that caused the stop.
The "data" argument is a pointer to struct ptrace_syscall_info
that specifies the system call information to be set.
The "addr" argument should be set to sizeof(struct ptrace_syscall_info)).
Link: https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/
Link: https://lkml.kernel.org/r/20250303112044.GF24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to syscall_set_arguments() that complements
syscall_get_arguments(), introduce syscall_set_nr() that complements
syscall_get_nr().
syscall_set_nr() is going to be needed along with syscall_set_arguments()
on all HAVE_ARCH_TRACEHOOK architectures to implement
PTRACE_SET_SYSCALL_INFO API.
Link: https://lkml.kernel.org/r/20250303112020.GD24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> # mips
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function is going to be needed on all HAVE_ARCH_TRACEHOOK
architectures to implement PTRACE_SET_SYSCALL_INFO API.
This partially reverts commit 7962c2eddbfe ("arch: remove unused function
syscall_set_arguments()") by reusing some of old syscall_set_arguments()
implementations.
[nathan@kernel.org: fix compile time fortify checks]
Link: https://lkml.kernel.org/r/20250408213131.GA2872426@ax162
Link: https://lkml.kernel.org/r/20250303112009.GC24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> [mips]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mm_struct.hiwater_rss can be accessed concurrently without proper
synchronization as reported by KCSAN.
This data race is benign as it only affects accounting information.
Annotate it with data_race() to make KCSAN happy.
Link: https://lkml.kernel.org/r/20250331-mm-maxrss-data-race-v2-1-cf958e6205bf@iencinas.com
Signed-off-by: Ignacio Encinas <ignacio@iencinas.com>
Reported-by: syzbot+419c4b42acc36c420ad3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67e3390c.050a0220.1ec46.0001.GAE@google.com/
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use a folio in the hugetlb pathway during the compaction migrate-able
pageblock scan.
This removes a call to compound_head().
Link: https://lkml.kernel.org/r/20250401021025.637333-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memory,x86,acpi: hotplug memory alignment advisement", v8.
When physical address regions are not aligned to memory block size, the
misaligned portion is lost (stranded capacity).
Block size (min/max/selected) is architecture defined. Most architectures
tend to use the minimum block size or some simplistic heurist. On x86,
memory block size increases up to 2GB, and is otherwise fitted to the
alignment of non-hotplug (i.e. not special purpose memory).
CXL exposes its memory for management through the ACPI CEDT (CXL Early
Detection Table) in a field called the CXL Fixed Memory Window. Per the
CXL specification, this memory must be aligned to at least 256MB.
When a CFMW aligns on a size less than the block size, this causes a loss
of up to 2GB per CFMW on x86. It is not uncommon for CFMW to be allocated
per-device - though this behavior is BIOS defined.
This patch set provides 3 things:
1) implement advise/query functions in driverse/base/memory.c to
report/query architecture agnostic hotplug block alignment advice.
2) update x86 memblock size logic to consider the hotplug advice
3) add code in acpi/numa/srat.c to report CFMW alignment advice
The advisement interfaces are design to be called during arch_init code
prior to allocator and smp_init. start_kernel will call these through
setup_arch() (via acpi and mm/init_64.c on x86), which occurs prior to
mm_core_init and smp_init - so no need for atomics.
There's an attempt to signal callers to advise() that query has already
occurred, but this is predicated on the notion that query actually occurs
(which presently only happens on the x86 arch). This is to assist
debugging future users. Otherwise, the advise() call has been marked
__init to help static discovery of bad call times.
Once query is called the first time, it will always return the same value.
Interfaces return -EBUSY and 0 respectively on systems without hotplug.
This patch (of 3):
Hotplug memory sources may have opinions on what the memblock size should
be - usually for alignment purposes. For example, CXL memory extents can
be 256MB with a matching alignment. If this size/alignment is smaller
than the block size, it can result in stranded capacity.
Implement memory_block_advise_max_size for use prior to allocator init,
for software to advise the system on the max block size.
Implement memory_block_probe_max_size for use by arch init code to
calculate the best block size. Use of advice is architecture defined.
The probe value can never change after first probe. Calls to advise after
probe will return -EBUSY to aid debugging.
On systems without hotplug, always return -ENODEV and 0 respectively.
Link: https://lkml.kernel.org/r/20250127153405.3379117-1-gourry@gourry.net
Link: https://lkml.kernel.org/r/20250127153405.3379117-2-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Bruno Faccini <bfaccini@nvidia.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, zsmalloc, zswap's and zram's backend memory allocator, does not
enforce any policy for the allocation of memory for the compressed data,
instead just adopting the memory policy of the task entering reclaim, or
the default policy (prefer local node) if no such policy is specified.
This can lead to several pathological behaviors in multi-node NUMA
systems:
1. Systems with CXL-based memory tiering can encounter the following
inversion with zswap/zram: the coldest pages demoted to the CXL tier
can return to the high tier when they are reclaimed to compressed swap,
creating memory pressure on the high tier.
2. Consider a direct reclaimer scanning nodes in order of allocation
preference. If it ventures into remote nodes, the memory it compresses
there should stay there. Trying to shift those contents over to the
reclaiming thread's preferred node further *increases* its local
pressure, and provoking more spills. The remote node is also the most
likely to refault this data again. This undesirable behavior was
pointed out by Johannes Weiner in [1].
3. For zswap writeback, the zswap entries are organized in
node-specific LRUs, based on the node placement of the original pages,
allowing for targeted zswap writeback for specific nodes.
However, the compressed data of a zswap entry can be placed on a
different node from the LRU it is placed on. This means that reclaim
targeted at one node might not free up memory used for zswap entries in
that node, but instead reclaiming memory in a different node.
All of these issues will be resolved if the compressed data go to the same
node as the original page. This patch encourages this behavior by having
zswap and zram pass the node of the original page to zsmalloc, and have
zsmalloc prefer the specified node if we need to allocate new (zs)pages
for the compressed data.
Note that we are not strictly binding the allocation to the preferred
node. We still allow the allocation to fall back to other nodes when the
preferred node is full, or if we have zspages with slots available on a
different node. This is OK, and still a strict improvement over the
status quo:
1. On a system with demotion enabled, we will generally prefer
demotions over compressed swapping, and only swap when pages have
already gone to the lowest tier. This patch should achieve the desired
effect for the most part.
2. If the preferred node is out of memory, letting the compressed data
going to other nodes can be better than the alternative (OOMs, keeping
cold memory unreclaimed, disk swapping, etc.).
3. If the allocation go to a separate node because we have a zspage
with slots available, at least we're not creating extra immediate
memory pressure (since the space is already allocated).
3. While there can be mixings, we generally reclaim pages in same-node
batches, which encourage zspage grouping that is more likely to go to
the right node.
4. A strict binding would require partitioning zsmalloc by node, which
is more complicated, and more prone to regression, since it reduces the
storage density of zsmalloc. We need to evaluate the tradeoff and
benchmark carefully before adopting such an involved solution.
[1]: https://lore.kernel.org/linux-mm/20250331165306.GC2110528@cmpxchg.org/
[senozhatsky@chromium.org: coding-style fixes]
Link: https://lkml.kernel.org/r/mnvexa7kseswglcqbhlot4zg3b3la2ypv2rimdl5mh5glbmhvz@wi6bgqn47hge
Link: https://lkml.kernel.org/r/20250402204416.3435994-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Gregory Price <gourry@gourry.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org> [zram, zsmalloc]
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev> [zswap/zsmalloc]
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers now use folio_nr_pages(). Delete this wrapper.
Link: https://lkml.kernel.org/r/20250402210612.2444135-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function has no more callers; delete it.
Link: https://lkml.kernel.org/r/20250402210612.2444135-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extract folios from i_mapping, not pages. Removes a hidden call to
compound_head(), a use of thp_nr_pages() and an unnecessary assertion that
we didn't find a tail page in the page cache.
Link: https://lkml.kernel.org/r/20250402210612.2444135-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All users of this function now call folio_file_page() instead. Delete it.
Link: https://lkml.kernel.org/r/20250402210612.2444135-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers have been converted to call offset_in_folio().
Link: https://lkml.kernel.org/r/20250402210612.2444135-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Misc folio patches for 6.16".
Remove a few APIs that we've converted everybody from using. I also found
a few places that extract a page pointer from i_pages, which will be an
invalid thing to do when we separate pages from folios.
This patch (of 8):
All filesystems have now been converted to call readahead_folio() so we
can delete this wrapper.
Link: https://lkml.kernel.org/r/20250402210612.2444135-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20250402210612.2444135-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are now no callers of mk_huge_pmd() and mk_pmd(). Remove them.
Link: https://lkml.kernel.org/r/20250402181709.2386022-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Removes five conversions from folio to page. Also removes both callers of
mk_pmd() that aren't part of mk_huge_pmd(), getting us a step closer to
removing the confusion between mk_pmd(), mk_huge_pmd() and pmd_mkhuge().
Link: https://lkml.kernel.org/r/20250402181709.2386022-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The only remaining user of mk_huge_pte() is the debug code, so remove the
API and replace its use with pfn_pte() which lets us remove the conversion
to a page first. We should always call arch_make_huge_pte() to turn this
PTE into a huge PTE before operating on it with huge_pte_mkdirty() etc.
Link: https://lkml.kernel.org/r/20250402181709.2386022-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove a cast from folio to page in four callers of mk_pte().
Link: https://lkml.kernel.org/r/20250402181709.2386022-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All architectures now use the common mk_pte() definition, so we can remove
the condition.
Link: https://lkml.kernel.org/r/20250402181709.2386022-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Most architectures simply call pfn_pte(). Centralise that as the normal
definition and remove the definition of mk_pte() from the architectures
which have either that exact definition or something similar.
Link: https://lkml.kernel.org/r/20250402181709.2386022-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 51ff4d7486f0 ("mm: avoid extra mem_alloc_profiling_enabled()
checks") introduces a possible use-after-free scenario, when page
is non-compound, page[0] could be released by other thread right
after put_page_testzero failed in current thread, pgalloc_tag_sub_pages
afterwards would manipulate an invalid page for accounting remaining
pages:
[timeline] [thread1] [thread2]
| alloc_page non-compound
V
| get_page, rf counter inc
V
| in ___free_pages
| put_page_testzero fails
V
| put_page, page released
V
| in ___free_pages,
| pgalloc_tag_sub_pages
| manipulate an invalid page
V
Restore __free_pages() to its state before, retrieve alloc tag
beforehand.
Link: https://lkml.kernel.org/r/20250505193034.91682-1-00107082@163.com
Fixes: 51ff4d7486f0 ("mm: avoid extra mem_alloc_profiling_enabled() checks")
Signed-off-by: David Wang <00107082@163.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
|
|
Turn Sargun's internal kprobe based implementation of this into a normal
static tracepoint. Also, remove the dprintk's that got added recently
with the fix for zero-length ACLs.
Cc: Sargun Dillon <sargun@sargun.me>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I've been looking at a problem where we see increased RPC timeouts in
clients when the nfs_layout_flexfiles dataserver_timeo value is tuned
very low (6s). This is necessary to ensure quick failover to a different
mirror if a server goes down, but it causes a lot more major RPC timeouts.
Ultimately, the problem is server-side however. It's sometimes doesn't
respond to connection attempts. My theory is that the interrupt handler
runs when a connection comes in, the xprt ends up being enqueued, but it
takes a significant amount of time for the nfsd thread to pick it up.
Currently, the svc_xprt_dequeue tracepoint displays "wakeup-us". This is
the time between the wake_up() call, and the thread dequeueing the xprt.
If no thread was woken, or the thread ended up picking up a different
xprt than intended, then this value won't tell us how long the xprt was
waiting.
Add a new xpt_qtime field to struct svc_xprt and set it in
svc_xprt_enqueue(). When the dequeue tracepoint fires, also store the
time that the xprt sat on the queue in total. Display it as "qtime-us".
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add the unique ID for Qualcomm SM8750 SoC.
This value is used to differentiate the SoC across qcom targets.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250508134635.1627031-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Resolve conflicts in dell/alienware-wmi-wmax and asus-wmi, and enable
applying a few amd/hsmp patches that depend on changes in the fixes
branch.
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.16-2025-05-09:
amdgpu:
- IPS fixes
- DSC cleanup
- DC Scaling updates
- DC FP fixes
- Fused I2C-over-AUX updates
- SubVP fixes
- Freesync fix
- DMUB AUX fixes
- VCN fix
- Hibernation fixes
- HDP fixes
- DCN 2.1 fixes
- DPIA fixes
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- Misc code cleanups
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
amdkfd:
- Update error messages for SDMA
- Userptr updates
drm:
- Add drm_file_err function
dma-buf:
- Add a helper to sort and deduplicate dma_fence arrays
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250509230951.3871914-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
|
|
s/devince/device/
It's used only internally, so no any behavior changes.
Fixes: 37e0e14128e0 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250511141147.10246-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is no snd_wavefront_xxx() implementation, and no one is using it.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msbmpqls.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is no snd_gf1_lfo_xxx() implementation, and no one is using it.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6w2pqm8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The acpi_handle should be just a handle and not a pointer in
sdw_intel_acpi_scan() parameter list.
It is called with 'acpi_handle handle' as parameter and it is passing it to
acpi_walk_namespace, which also expects acpi_handle and not acpi_handle*
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250508181207.22113-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
futex_mm_init()
The following commit added an rcu_assign_pointer() assignment to
futex_mm_init() in <linux/futex.h>:
bd54df5ea7ca ("futex: Allow to resize the private local hash")
Which breaks the build on older compilers (gcc-9, x86-64 defconfig):
CC io_uring/futex.o
In file included from ./arch/x86/include/generated/asm/rwonce.h:1,
from ./include/linux/compiler.h:390,
from ./include/linux/array_size.h:5,
from ./include/linux/kernel.h:16,
from io_uring/futex.c:2:
./include/linux/futex.h: In function 'futex_mm_init':
./include/linux/rcupdate.h:555:36: error: dereferencing pointer to incomplete type 'struct futex_private_hash'
The problem is that this variant of rcu_assign_pointer() wants to
know the full type of 'struct futex_private_hash', which type
is local to futex.c:
kernel/futex/core.c:struct futex_private_hash {
There are a couple of mechanical solutions for this bug:
- we can uninline futex_mm_init() and move it into futex/core.c
- or we can share the structure definition with kernel/fork.c.
But both of these solutions have disadvantages: the first one adds
runtime overhead, while the second one dis-encapsulates private
futex types.
A third solution, implemented by this patch, is to just initialize
mm->futex_phash with NULL like the patch below, it's not like this
new MM's ->futex_phash can be observed externally until the task
is inserted into the task list, which guarantees full store ordering.
The relaxation of this initialization might also give a tiny speedup
on certain platforms.
Fixes: bd54df5ea7ca ("futex: Allow to resize the private local hash")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/aB8SI00EHBri23lB@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
|
|
Add device tree bindings for video clock controller for SM6350 SoCs.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
Co-developed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250324-sm6350-videocc-v2-2-cc22386433f4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small driver fixes (mostly all IIO) for 6.15-rc6.
Included in here are:
- loads of tiny IIO driver fixes for reported issues
- hyperv driver fix for a much-reported and worked on sysfs ring
buffer creation bug
All of these have been in linux-next for over a week (the IIO ones for
many weeks now), with no reported issues"
* tag 'char-misc-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Drivers: hv: Make the sysfs node size for the ring buffer dynamic
uio_hv_generic: Fix sysfs creation path for ring buffer
iio: adis16201: Correct inclinometer channel resolution
iio: adc: ad7606: fix serial register access
iio: pressure: mprls0025pa: use aligned_s64 for timestamp
iio: imu: adis16550: align buffers for timestamp
staging: iio: adc: ad7816: Correct conditional logic for store mode
iio: adc: ad7266: Fix potential timestamp alignment issue.
iio: adc: ad7768-1: Fix insufficient alignment of timestamp.
iio: adc: dln2: Use aligned_s64 for timestamp
iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64
iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.
iio: chemical: pms7003: use aligned_s64 for timestamp
iio: chemical: sps30: use aligned_s64 for timestamp
iio: imu: inv_mpu6050: align buffer for timestamp
iio: imu: st_lsm6dsx: Fix wakeup source leaks on device unbind
iio: adc: qcom-spmi-iadc: Fix wakeup source leaks on device unbind
iio: accel: fxls8962af: Fix wakeup source leaks on device unbind
iio: adc: ad7380: fix event threshold shift
iio: hid-sensor-prox: Fix incorrect OFFSET calculation
...
|
|
It's no longer used and can be removed, also remove the field
'gendisk->sync_io'.
Link: https://lore.kernel.org/linux-raid/20250506124903.2540268-10-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
- rename part_in_{flight, flight_rw} to bdev_count_{inflight, inflight_rw}
- export bdev_count_inflight, to fix a problem in mdraid that foreground
IO can be starved by background sync IO in later patches
Link: https://lore.kernel.org/linux-raid/20250506124903.2540268-6-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Add the required LVDS reset binding for the LCD TCON.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250507201943.330111-2-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert DSA to the new API, so that the ndo_eth_ioctl() path can
be removed completely.
Move the ds->ops->port_hwtstamp_get() and ds->ops->port_hwtstamp_set()
calls from dsa_user_ioctl() to dsa_user_hwtstamp_get() and
dsa_user_hwtstamp_set().
Due to the fact that the underlying ifreq type changes to
kernel_hwtstamp_config, the drivers and the Ocelot switchdev front-end,
all hooked up directly or indirectly, must also be converted all at once.
The conversion also updates the comment from dsa_port_supports_hwtstamp(),
which is no longer true because kernel_hwtstamp_config is kernel memory
and does not need copy_to_user(). I've deliberated whether it is
necessary to also update "err != -EOPNOTSUPP" to a more general "!err",
but all drivers now either return 0 or -EOPNOTSUPP.
The existing logic from the ocelot_ioctl() function, to avoid
configuring timestamping if the PHY supports the operation, is obsoleted
by more advanced core logic in dev_set_hwtstamp_phylib().
This is only a partial preparation for proper PHY timestamping support.
None of these switch driver currently sets up PTP traps for PHY
timestamping, so setting dev->see_all_hwtstamp_requests is not yet
necessary and the conversion is relatively trivial.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # felix, sja1105, mv88e6xxx
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508095236.887789-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
requested
Symmetric RSS hash requires that:
* No other fields besides IP src/dst and/or L4 src/dst are set
* If src is set, dst must also be set
This restriction was only enforced when RXNFC was configured after
symmetric hash was enabled. In the opposite order of operations (RXNFC
then symmetric enablement) the check was not performed.
Perform the sanity check on set_rxfh as well, by iterating over all flow
types hash fields and making sure they are all symmetric.
Introduce a function that returns whether a flow type is hashable (not
spec only) and needs to be iterated over. To make sure that no one
forgets to update the list of hashable flow types when adding new flow
types, a static assert is added to draw the developer's attention.
The conversion of uapi #defines to enum is not ideal, but as Jakub
mentioned [1], we have precedent for that.
[1] https://lore.kernel.org/netdev/20250324073509.6571ade3@kernel.org/
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250508103034.885536-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.16
1. Mediatek: Add support for MT6893 MTK SMI.
2. STM32: Add new driver for STM32 Octo Memory Manager (OMM), which
manages muxing between two OSPI busses.
3. Several cleanups and minor improvements (OMAP GPMC, Kconfig entries,
BT1 L2).
* tag 'memory-controller-drv-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
MAINTAINERS: add entry for STM32 OCTO MEMORY MANAGER driver
memory: Add STM32 Octo Memory Manager driver
dt-bindings: memory-controllers: Add STM32 Octo Memory Manager controller
bus: firewall: Fix missing static inline annotations for stubs
memory: bt1-l2-ctl: replace scnprintf() with sysfs_emit()
memory: mtk-smi: Add support for Dimensity 1200 MT6893 SMI
dt-bindings: memory: mtk-smi: Add support for MT6893
memory: tegra: Do not enable by default during compile testing
memory: Simplify 'default' choice in Kconfig
memory: omap-gpmc: remove GPIO set() and direction_output() callbacks
memory: omap-gpmc: use the dedicated define for GPIO direction
Link: https://lore.kernel.org/r/20250508093451.55755-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Renesas memory controller drivers for v6.16
Improvements and new device support for the Renesas RPC IF memory
controller driver:
1. Minor cleanup and improvements.
2. Refactor the driver to accommodate for newly added Renesas RZ/G3E support:
- Acquire two resets instead of only one,
- Add RZ/G3E xSPI support with different register layout and its own,
new interface for Renesas SPI.
* tag 'memory-controller-drv-renesas-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: renesas-rpc-if: Add missing static keyword
memory: renesas-rpc-if: Add RZ/G3E xSPI support
memory: renesas-rpc-if: Add wrapper functions
memory: renesas-rpc-if: Add regmap to struct rpcif_info
memory: renesas-rpc-if: Use devm_reset_control_array_get_exclusive()
memory: renesas-rpc-if: Move rpc-if reg definitions
dt-bindings: memory: Document RZ/G3E support
memory: renesas-rpc-if: Move rpcif_info definitions near to the user
memory: renesas-rpc-if: Fix RPCIF_DRENR_CDB macro error
Link: https://lore.kernel.org/r/20250508090749.51379-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.16
1. Quirk framework to handle buggy firmware
With SCMI gaining broader adoption across arm64 platforms, it's
increasingly important to address how we consistently manage out-of-spec
SCMI firmware already deployed in the field. This change introduces a
lightweight quirk framework built around static_keys, enabling developers to:
- Define quirks and their match criteria, which can include:
o A list of compatibles ({ comp, comp2, NULL })
o Vendor ID / Sub-Vendor ID
o Firmware implementation version ranges ([Min_Vers, Max_Vers])
Matching proceeds from the most specific (longest match) to the least
specific. NULL entries are treated as wildcards (i.e., match any value).
This flexibility allows matching very specific combinations or just a
general compatible string.
The quirk code blocks/snippets implementing the workaround are placed near
their intended usage and guarded by a static_key that's tied to the quirk.
Once the SCMI core stack is initialized and retrieves platform info via the
base protocol, any matching quirks will have their associated static_keys
enabled.
2. Quirk for Qualcomm X1E platforms
On some Qualcomm X1E platforms, such as the Lenovo ThinkPad T14s, the
SCMI firmware fails to set the FastChannel support bit for PERF_LEVEL_GET,
yet it crashes when the driver attempts to fall back to standard messaging
which is clearly out-of-spec behavior.
To work around this, the new SCMI quirk framework is used to
unconditionally enable FC initialization for this firmware version.
In the future, once the fixed firmware version is identified, an upper
version bound can be added to the quirk match criteria. Alternatively,
matching can be further restricted using a SoC-specific compatible string
if always enabling FC proves problematic elsewhere.
3. Support for NXP i.MX LMM/CPU vendor protocol extensions
The i.MX95 System Manager (SM) implements Logical Machine Management (LMM)
and a CPU protocol to manage Logical Machines (LM) and CPUs (e.g., M7).
These changes integrate the vendor-specific protocol extensions
implementing the LMM and CPU protocols for the i.MX95, facilitating
standardized communication between the operating system and the platform's
firmware, which will be used by remoteproc drivers. The changes also
include the necessary device tree bindings.
4. Miscellaneous cleanups/changes
These mainly include polling support in SCMI raw mode. The cleanups
centralize error logging for SCMI device creation into a single helper
function, consolidate the device matching logic into a single function, and
ensure that devices must have a name for registration—removing support for
unnamed devices when matching drivers and devices for probing. Transport
devices are now excluded from bus matching, and the correct assignment of
the parent device for the arm-scmi platform device is ensured in the
transport drivers.
* tag 'scmi-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: quirk: Force perf level get fastchannel
firmware: arm_scmi: quirk: Fix CLOCK_DESCRIBE_RATES triplet
firmware: arm_scmi: Add common framework to handle firmware quirks
firmware: arm_scmi: Ensure that the message-id supports fastchannel
MAINTAINERS: add entry for i.MX SCMI extensions
firmware: imx: Add i.MX95 SCMI CPU driver
firmware: imx: Add i.MX95 SCMI LMM driver
firmware: arm_scmi: imx: Add i.MX95 CPU Protocol
firmware: arm_scmi: imx: Add i.MX95 LMM protocol
dt-bindings: firmware: Add i.MX95 SCMI LMM and CPU protocol
firmware: arm_scmi: imx: Add LMM and CPU documentation
firmware: arm_scmi: Add polling support to raw mode
firmware: arm_scmi: Exclude transport devices from bus matching
firmware: arm_scmi: Assign correct parent to arm-scmi platform device
firmware: arm_scmi: Refactor error logging from SCMI device creation to single helper
firmware: arm_scmi: Refactor device matching logic to eliminate duplication
firmware: arm_scmi: Ensure scmi_devices are always matched by name as well
Link: https://lore.kernel.org/r/20250507134713.49039-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.16
Several improvements to Exynos ACPM (Alive Clock and Power Manager)
driver:
1. Handle communication timeous better.
2. Avoid sleeping, so users (PMIC) can still transfer during system
shutdown.
3. Fix reading longer messages from them firmware.
4. Deferred probe improvements.
5. Model the user of ACPM - PMIC - a as child device and export
devm_acpm_get_by_node() for such use case.
* tag 'samsung-drivers-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: Correct kerneldoc and use typical np argument name
firmware: exynos-acpm: introduce devm_acpm_get_by_node()
firmware: exynos-acpm: populate devices from device tree data
firmware: exynos-acpm: silence EPROBE_DEFER error on boot
firmware: exynos-acpm: fix reading longer results
dt-bindings: firmware: google,gs101-acpm-ipc: add PMIC child node
firmware: exynos-acpm: allow use during system shutdown
firmware: exynos-acpm: use ktime APIs for timeout detection
Link: https://lore.kernel.org/r/20250501103541.13795-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16
- Add SDHI, ICU, I2C, PMIC, and GPU support on the RZ/G3E SoC and the
RZ/G3E SoM and SMARC Carrier-II EVK development board,
- Add internal SDHI regulator support on the RZ/V2H(P) SoC,
- Add UFS tuning parameters in E-FUSE on the R-Car S4-8 ES1.2 SoC,
- Add support for Ethernet ports C and D, I2C, keys, and SDHI on the
RZ/N1D SoC and the RZN1D-DB and RZN1D-EB development and expansion
boards,
- Add initial support for the RZ/V2N (R9A09G056) and the RZ/V2N EVK
board,
- Add support for the Retronix Sparrow Hawk board, which is based on
R-Car V4H ES3.0,
- Add ISP core support on R-Car V3U, V4H, and V4M,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: r8a779h0: Add ISP core function block
arm64: dts: renesas: r8a779g0: Add ISP core function block
arm64: dts: renesas: r8a779a0: Add ISP core function block
arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support
arm64: dts: renesas: rzg3e-smarc-som: Enable Mali-G52
arm64: dts: renesas: r9a09g047: Add Mali-G52 GPU node
arm64: dts: renesas: rzg3e-smarc-som: Add RAA215300 pmic support
arm64: dts: renesas: rzg3e-smarc-som: Add I2C2 device pincontrol
ARM: dts: renesas: r9a06g032-rzn1d400-eb: describe SD card port
ARM: dts: renesas: r9a06g032: Describe SDHCI controllers
arm64: dts: renesas: Add initial device tree for RZ/V2N EVK
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2N
dt-bindings: pinctrl: renesas: Document RZ/V2N SoC
dt-bindings: clock: renesas: Document RZ/V2N SoC CPG
dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC
dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVK
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe keys
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Describe I2C bus
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe I2C bus
ARM: dts: renesas: r9a06g032: Describe I2C controllers
...
Link: https://lore.kernel.org/r/cover.1745582596.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
