summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2014-08-11net: Always untag vlan-tagged traffic on input.Vlad Yasevich2-6/+1
Currently the functionality to untag traffic on input resides as part of the vlan module and is build only when VLAN support is enabled in the kernel. When VLAN is disabled, the function vlan_untag() turns into a stub and doesn't really untag the packets. This seems to create an interesting interaction between VMs supporting checksum offloading and some network drivers. There are some drivers that do not allow the user to change tx-vlan-offload feature of the driver. These drivers also seem to assume that any VLAN-tagged traffic they transmit will have the vlan information in the vlan_tci and not in the vlan header already in the skb. When transmitting skbs that already have tagged data with partial checksum set, the checksum doesn't appear to be updated correctly by the card thus resulting in a failure to establish TCP connections. The following is a packet trace taken on the receiver where a sender is a VM with a VLAN configued. The host VM is running on doest not have VLAN support and the outging interface on the host is tg3: 10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294837885 ecr 0,nop,wscale 7], length 0 10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294838888 ecr 0,nop,wscale 7], length 0 This connection finally times out. I've only access to the TG3 hardware in this configuration thus have only tested this with TG3 driver. There are a lot of other drivers that do not permit user changes to vlan acceleration features, and I don't know if they all suffere from a similar issue. The patch attempt to fix this another way. It moves the vlan header stipping code out of the vlan module and always builds it into the kernel network core. This way, even if vlan is not supported on a virtualizatoin host, the virtual machines running on top of such host will still work with VLANs enabled. CC: Patrick McHardy <kaber@trash.net> CC: Nithin Nayak Sujir <nsujir@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-07Merge branch 'akpm' (patchbomb from Andrew Morton)Linus Torvalds32-322/+371
Merge incoming from Andrew Morton: - Various misc things. - arch/sh updates. - Part of ocfs2. Review is slow. - Slab updates. - Most of -mm. - printk updates. - lib/ updates. - checkpatch updates. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits) checkpatch: update $declaration_macros, add uninitialized_var checkpatch: warn on missing spaces in broken up quoted checkpatch: fix false positives for --strict "space after cast" test checkpatch: fix false positive MISSING_BREAK warnings with --file checkpatch: add test for native c90 types in unusual order checkpatch: add signed generic types checkpatch: add short int to c variable types checkpatch: add for_each tests to indentation and brace tests checkpatch: fix brace style misuses of else and while checkpatch: add --fix option for a couple OPEN_BRACE misuses checkpatch: use the correct indentation for which() checkpatch: add fix_insert_line and fix_delete_line helpers checkpatch: add ability to insert and delete lines to patch/file checkpatch: add an index variable for fixed lines checkpatch: warn on break after goto or return with same tab indentation checkpatch: emit a warning on file add/move/delete checkpatch: add test for commit id formatting style in commit log checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings checkpatch: improve "no space after cast" test checkpatch: allow multiple const * types ...
2014-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-3/+5
Pull networking fixes from David Miller: "This fixes the most immediate fallout from yesterday's networking merge: 1) sock_tx_timestamp() must not clear the passed in tx_flags, but rather add to them. Fix from Eric Dumazet. 2) The hyperv driver sendbuf region increase needs to be decreased slightly to handle older backends. From KY Srinivasan. 3) Fix RCU lockdep splats in netlink diag after recent hashing changes, from Thomas Graf. 4) The new IPV6_FLOWLABEL was given a socket option number that overlapped with an existing IP6 tables one, breaking ip6_tables. Fixed by Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netlink: hold nl_sock_hash_lock during diag dump tcp: md5: check md5 signature without socket lock net: fix USB network driver config option. net: reallocate new socket option number for IPV6_AUTOFLOWLABEL vmxnet3: fix decimal printf format specifiers prefixed with 0x net-timestamp: cumulative tcp timestamping fixes hyperv: Adjust the size of sendbuf region to support ws2008r2 cxgb4: Fix for SR-IOV VF initialization net-timestamp: sock_tx_timestamp() fix
2014-08-07Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "Some highlights: - hid-sony improvements of Sixaxis device support by Antonio Ospite - hid-hyperv driven devices can now be used as wakeup source, by Dexuan Cui - hid-lenovo driver is now more generic and supports more devices, by Jamie Lentin - hid-huion now supports wider range of tablets, by Nikolai Kondrashov - other various unsorted fixes and device ID additions" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits) HID: hyperv: register as a wakeup source HID: sony: Default initialize all elements of the LED max_brightness array to 1 HID: huion: Fix sparse warnings HID: usbhid: Use flag HID_DISCONNECTED when a usb device is removed HID: ignore jabra gn9350e HID: cp2112: add I2C mode HID: use multi input quirk for 22b9:2968 HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices HID: rmi: check that report ids exist in the report_id_hash before accessing their size HID: lenovo: Add support for Compact (BT|USB) keyboard HID: lenovo: Don't call function in condition, show error codes HID: lenovo: Prepare support for adding other devices HID: lenovo: Rename hid-lenovo-tpkbd to hid-lenovo HID: huion: Handle tablets with UC-Logic vendor ID HID: huion: Switch to generating report descriptor HID: huion: Don't ignore other interfaces HID: huion: Use "tablet" instead of specific model HID: add quirk for 0x04d9:0xa096 device HID: i2c-hid: call the hid driver's suspend and resume callbacks HID: rmi: change logging level of log messages related to unexpected reports ...
2014-08-07Merge tag 'pm+acpi-3.17-rc1' of ↵Linus Torvalds19-101/+389
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "Again, ACPICA leads the pack (47 commits), followed by cpufreq (18 commits) and system suspend/hibernation (9 commits). From the new code perspective, the ACPICA update brings ACPI 5.1 to the table, including a new device configuration object called _DSD (Device Specific Data) that will hopefully help us to operate device properties like Device Trees do (at least to some extent) and changes related to supporting ACPI on ARM. Apart from that we have hibernation changes making it use radix trees to store memory bitmaps which should speed up some operations carried out by it quite significantly. We also have some power management changes related to suspend-to-idle (the "freeze" sleep state) support and more preliminary changes needed to support ACPI on ARM (outside of ACPICA). The rest is fixes and cleanups pretty much everywhere. Specifics: - ACPICA update to upstream version 20140724. That includes ACPI 5.1 material (support for the _CCA and _DSD predefined names, changes related to the DMAR and PCCT tables and ARM support among other things) and cleanups related to using ACPICA's header files. A major part of it is related to acpidump and the core code used by that utility. Changes from Bob Moore, David E Box, Lv Zheng, Sascha Wildner, Tomasz Nowicki, Hanjun Guo. - Radix trees for memory bitmaps used by the hibernation core from Joerg Roedel. - Support for waking up the system from suspend-to-idle (also known as the "freeze" sleep state) using ACPI-based PCI wakeup signaling (Rafael J Wysocki). - Fixes for issues related to ACPI button events (Rafael J Wysocki). - New device ID for an ACPI-enumerated device included into the Wildcat Point PCH from Jie Yang. - ACPI video updates related to backlight handling from Hans de Goede and Linus Torvalds. - Preliminary changes needed to support ACPI on ARM from Hanjun Guo and Graeme Gregory. - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui. - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros (Rafael J Wysocki). - ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J Wysocki. - Cleanups and improvements related to system suspend from Lan Tianyu, Randy Dunlap and Rafael J Wysocki. - ACPI battery cleanup from Wei Yongjun. - cpufreq core fixes from Viresh Kumar. - Elimination of a deadband effect from the cpufreq ondemand governor and intel_pstate driver cleanups from Stratos Karafotis. - 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas Patocka. - Fix for the imx6 cpufreq driver from Anson Huang. - cpuidle core and governor cleanups from Daniel Lezcano, Sandeep Tripathy and Mohammad Merajul Islam Molla. - Build fix for the big_little cpuidle driver from Sachin Kamat. - Configuration fix for the Operation Performance Points (OPP) framework from Mark Brown. - APM cleanup from Jean Delvare. - cpupower utility fixes and cleanups from Peter Senna Tschudin, Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger" * tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits) ACPI / LPSS: add LPSS device for Wildcat Point PCH ACPI / PNP: Replace faulty is_hex_digit() by isxdigit() ACPICA: Update version to 20140724. ACPICA: ACPI 5.1: Update for PCCT table changes. ACPICA/ARM: ACPI 5.1: Update for GTDT table changes. ACPICA/ARM: ACPI 5.1: Update for MADT changes. ACPICA/ARM: ACPI 5.1: Update for FADT changes. ACPICA: ACPI 5.1: Support for the _CCA predifined name. ACPICA: ACPI 5.1: New notify value for System Affinity Update. ACPICA: ACPI 5.1: Support for the _DSD predefined name. ACPICA: Debug object: Add current value of Timer() to debug line prefix. ACPICA: acpihelp: Add UUID support, restructure some existing files. ACPICA: Utilities: Fix local printf issue. ACPICA: Tables: Update for DMAR table changes. ACPICA: Remove some extraneous printf arguments. ACPICA: Update for comments/formatting. No functional changes. ACPICA: Disassembler: Add support for the ToUUID opererator (macro). ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro. ACPICA: Work around an ancient GCC bug. ACPI / processor: Make it possible to get local x2apic id via _MAT ...
2014-08-07Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds15-349/+116
Pull SCSI updates from James Bottomley: "This patch set consists of the usual driver updates (ufs, storvsc, pm8001 hpsa). It also has removal of the user space target driver code (everyone is using LIO now), a partial PCI MSI-X update, more multi-queue updates, conversion to 64 bit LUNs (so we could theoretically cope with any LUN returned by a device) and placeholder support for the ZBC device type (Shingle drives), plus an assortment of minor updates and bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (143 commits) scsi: do not issue SCSI RSOC command to Promise Vtrak E610f vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix() pm8001: Fix invalid return when request_irq() failed lpfc: Remove superfluous call to pci_disable_msix() isci: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Cleanup bfad_setup_intr() function bfa: Do not call pci_enable_msix() after it failed once fnic: Use pci_enable_msix_exact() instead of pci_enable_msix() scsi: use short driver name for per-driver cmd slab caches scsi_debug: support scsi-mq, queues and locks Drivers: add blist flags scsi: ufs: fix endianness sparse warnings scsi: ufs: make undeclared functions static bnx2i: Update driver version to 2.7.10.1 pm8001: fix a memory leak in nvmd_resp pm8001: fix update_flash pm8001: fix a memory leak in flash_update pm8001: Cleaning up uninitialized variables pm8001: Fix to remove null pointer checks that could never happen ...
2014-08-07Merge tag 'sound-3.17-rc1' of ↵Linus Torvalds17-44/+199
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There've been many updates in ASoC side at this time, especially the framework enhancement for multiple CODECs on a single DAI and more componentization works. The only major change in ALSA core is the addition of timestamp type in sw_params field. This should behave in backward compatible way. Other than that, there are lots of small changes and new drivers in wide range, including a large code cut in HD-audio driver for deprecated static quirks. Some highlights are below: ALSA Core: - Add the new timestamp type field to sw_params to choose MONOTONIC_RAW type HD-audio: - Continued conversion to standard printk macros, generic code cleanups - Removal of obsoleted static quirk codes for Conexant and C-Media codecs - Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED, Gigabyte BXBT-2807 mobo - Intel Braswell support ASoC: - Support for multiple CODECs attached to a single DAI, enabling systems with for example multiple DAC/speaker drivers on a single link, contributed by Benoit Cousson based on work from Misael Lopez Cruz - Support for byte controls larger than 256 bytes based on the use of TLVs contributed by Omair Mohammed Abdullah - More componentisation work from Lars-Peter Clausen - The remainder of the conversions of CODEC drivers to params_width() by Mark Brown - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments TAS2552 - Lots of updates and fixes, especially to the DaVinci, Intel, Freescale, Realtek, and rcar drivers" * tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (402 commits) ALSA: usb-audio: Whitespace cleanups for sound/usb/midi.* ALSA: usb-audio: Respond to suspend and resume callbacks for MIDI input sound/oss/pss: Remove typedefs pss_mixerdata and pss_confdata sound/oss/opl3: Remove typedef opl_devinfo ALSA: fireworks: fix specifiers in format strings for propper output ASoC: imx-audmux: Use uintptr_t for port numbers ASoC: davinci: Enable menuconfig entry for McASP ASoC: fsl_asrc: Don't access members of config before checking it ASoC: fsl_sarc_dma: Check pair before using it ASoC: adau1977: Fix truncation warning on 64 bit architectures ALSA: virtuoso: add Xonar Essence STX II support ALSA: riptide: fix %d confusingly prefixed with 0x in format strings ALSA: fireworks: fix %d confusingly prefixed with 0x in format strings ALSA: hda - add codec ID for Braswell display audio codec ALSA: hda - add PCI IDs for Intel Braswell ALSA: usb-audio: Adjust Gamecom 780 volume level ALSA: usb-audio: improve dmesg source grepability ASoC: rt5670: Fix duplicate const warnings ASoC: rt5670: Staticise non-exported symbols ASoC: Intel: update stream only on stream IPC msgs ...
2014-08-07Merge tag 'for-v3.17' of git://git.infradead.org/battery-2.6Linus Torvalds1-0/+4
Pull power supply changes from Sebastian Reichel: - Added iPaq h3xxx battery driver - Added Broadcom STB reset driver - DT support for rx51-battery - misc. fixes * tag 'for-v3.17' of git://git.infradead.org/battery-2.6: ipaq_micro_battery: fix sparse non static symbol warning power: add driver for battery reading on iPaq h3xxx power: twl4030_charger: detect battery presence prior to enabling charger power: reset: Add reboot driver for brcmstb power_supply: Fix sparse non static symbol warning power_supply: Add inlmt,iterm, min/max temp props charger: tps65090: Allow charger module to be used when no irq power/reset: Fix GPL v2 license string typo power: poweroff: gpio: convert to use descriptors bq27000: report missing device better. bq27x00_battery: Introduce the use of the managed version of kzalloc Documentation: DT: Document rx51-battery binding rx51_battery: convert to iio consumer bq2415x_charger: Fix Atomic Sleep Bug
2014-08-07lib: bitmap: add missing mask in bitmap_andnotRasmus Villemoes1-1/+1
Apparently, bitmap_andnot is supposed to return whether the new bitmap is empty. But it didn't take potential garbage bits in the last word into account. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: add missing mask in bitmap_andRasmus Villemoes1-1/+1
Apparently, bitmap_and is supposed to return whether the new bitmap is empty. But it didn't take potential garbage bits in the last word into account. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: add missing mask in bitmap_shift_rightRasmus Villemoes1-1/+1
There is no guarantee that *src does not contain garbage bits outside the lower nbits, so we need to mask it before the shift-and-assign. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: change parameter of bitmap_*_region to unsignedRasmus Villemoes1-3/+3
Changing the pos parameter of __reg_op to unsigned allows the compiler to generate slightly smaller and simpler code. Also update its callers bitmap_*_region to receive and pass unsigned int. The return types of bitmap_find_free_region and bitmap_allocate_region are still int to allow a negative error code to be returned. An int is certainly capable of representing any realistic return value. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: make the start index of bitmap_clear unsignedRasmus Villemoes1-1/+1
The compiler can generate slightly smaller and simpler code when it knows that "start" is non-negative. Also, use the names "start" and "len" for the two parameters for consistency with bitmap_set. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: make the start index of bitmap_set unsignedRasmus Villemoes1-1/+1
The compiler can generate slightly smaller and simpler code when it knows that "start" is non-negative. Also, use the names "start" and "len" for the two parameters in both header file and implementation, instead of the previous mix. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: make nbits parameter of bitmap_weight unsignedRasmus Villemoes1-2/+2
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. I didn't change the return type, since that might change the semantics of some expression containing a call to bitmap_weight(). Certainly an int is capable of holding the result. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: make nbits parameter of bitmap_subset unsignedRasmus Villemoes1-2/+2
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: make nbits parameter of bitmap_intersects unsignedRasmus Villemoes1-2/+2
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: make nbits parameter of bitmap_{and,or,xor,andnot} unsignedRasmus Villemoes1-8/+8
This change is only for consistency with the changes to the other bitmap_* functions; it doesn't change the size of the generated code: inside BITS_TO_LONGS there is a sizeof(long), which causes bits to be interpreted as unsigned anyway. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: remove unnecessary mask from bitmap_complementRasmus Villemoes1-1/+1
Since the extra bits are "don't care", there is no reason to mask the last word to the used bits when complementing. This shaves off yet a few bytes. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: make nbits parameter of bitmap_complement unsignedRasmus Villemoes1-3/+3
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: make nbits parameter of bitmap_equal unsignedRasmus Villemoes1-1/+1
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: make nbits parameter of bitmap_full unsignedRasmus Villemoes1-2/+2
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: bitmap: make nbits parameter of bitmap_empty unsignedRasmus Villemoes1-2/+2
Many functions in lib/bitmap.c start with an expression such as lim = bits/BITS_PER_LONG. Since bits has type (signed) int, and since gcc cannot know that it is in fact non-negative, it generates worse code than it could. These patches, mostly consisting of changing various parameters to unsigned, gives a slight overall code reduction: add/remove: 1/1 grow/shrink: 8/16 up/down: 251/-414 (-163) function old new delta tick_device_uses_broadcast 335 425 +90 __irq_alloc_descs 498 554 +56 __bitmap_andnot 73 115 +42 __bitmap_and 70 101 +31 bitmap_weight - 11 +11 copy_hugetlb_page_range 752 762 +10 follow_hugetlb_page 846 854 +8 hugetlb_init 1415 1417 +2 hugetlb_nrpages_setup 130 131 +1 hugetlb_add_hstate 377 376 -1 bitmap_allocate_region 82 80 -2 select_task_rq_fair 2202 2191 -11 hweight_long 66 55 -11 __reg_op 230 219 -11 dm_stats_message 2849 2833 -16 bitmap_parselist 92 74 -18 __bitmap_weight 115 97 -18 __bitmap_subset 153 129 -24 __bitmap_full 128 104 -24 __bitmap_empty 120 96 -24 bitmap_set 179 149 -30 bitmap_clear 185 155 -30 __bitmap_equal 136 105 -31 __bitmap_intersects 148 108 -40 __bitmap_complement 109 67 -42 tick_device_setup_broadcast_func.isra 81 - -81 [The increases in __bitmap_and{,not} are due to bug fixes 17/18,18/18. No idea why bitmap_weight suddenly appears.] While 163 bytes treewide is insignificant, I believe the bitmap functions are often called with locks held, so saving even a few cycles might be worth it. While making these changes, I found a few other things that might be worth including. 16,17,18 are actual bug fixes. The rest shouldn't change the behaviour of any of the functions, provided no-one passed negative nbits values. If something should come up, it should be fairly bisectable. A few issues I thought about, but didn't know what to do with: * Many of the functions misbehave if nbits is compile-time 0; the out-of-line functions generally handle 0 correctly. bitmap_fill() is particularly bad, whether the 0 is known at compile time or not. It would probably be nice to add detection of at least compile-time 0 and handle that appropriately. * I didn't change __bitmap_shift_{left,right} to use unsigned because I want to fully understand why the algorithm works before making that change. However, AFAICT, they behave correctly for all (positive) shift amounts. This is not the case for the small_const_nbits versions. If for example nbits = n = BITS_PER_LONG, the shift operators turn into no-ops (at least on x86), so one get *dst = *src, whereas one would expect to get *dst=0. That difference in behaviour is somewhat annoying. This patch (of 18): The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07kernel.h: remove deprecated pack_hex_byteJoe Perches1-5/+0
It's been nearly 3 years now since commit 55036ba76b2d ("lib: rename pack_hex_byte() to hex_byte_pack()") so it's time to remove this deprecated and unused static inline. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib: add lib/glob.cGeorge Spelvin1-0/+9
This is a helper function from drivers/ata/libata_core.c, where it is used to blacklist particular device models. It's being moved to lib/ so other drivers may use it for the same purpose. This implementation in non-recursive, so is safe for the kernel stack. [akpm@linux-foundation.org: fix sparse warning] Signed-off-by: George Spelvin <linux@horizon.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07zlib: clean up some dead codeSergey Senozhatsky1-118/+0
Cleanup unused `if 0'-ed functions, which have been dead since 2006 (commits 87c2ce3b9305 ("lib/zlib*: cleanups") by Adrian Bunk and 4f3865fb57a0 ("zlib_inflate: Upgrade library code to a recent version") by Richard Purdie): - zlib_deflateSetDictionary - zlib_deflateParams - zlib_deflateCopy - zlib_inflateSync - zlib_syncsearch - zlib_inflateSetDictionary - zlib_inflatePrime Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07klist: use same naming scheme as hlist for klist_add_after()Ken Helias1-1/+1
The name was modified from hlist_add_after() to hlist_add_behind() when adjusting the order of arguments to match the one with klist_add_after(). This is necessary to break old code when it would use it the wrong way. Make klist follow this naming scheme for consistency. Signed-off-by: Ken Helias <kenhelias@firemail.de> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07list: fix order of arguments for hlist_add_after(_rcu)Ken Helias2-6/+6
All other add functions for lists have the new item as first argument and the position where it is added as second argument. This was changed for no good reason in this function and makes using it unnecessary confusing. The name was changed to hlist_add_behind() to cause unconverted code to generate a compile error instead of using the wrong parameter order. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Ken Helias <kenhelias@firemail.de> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [intel driver bits] Cc: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07list: make hlist_add_after() argument names match hlist_add_after_rcu()Ken Helias1-7/+7
The argument names for hlist_add_after() are poorly chosen because they look the same as the ones for hlist_add_before() but have to be used differently. hlist_add_after_rcu() has made a better choice. Signed-off-by: Ken Helias <kenhelias@firemail.de> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07printk: rename DEFAULT_MESSAGE_LOGLEVELAlex Elder1-1/+1
Commit a8fe19ebfbfd ("kernel/printk: use symbolic defines for console loglevels") makes consistent use of symbolic values for printk() log levels. The naming scheme used is different from the one used for DEFAULT_MESSAGE_LOGLEVEL though. Change that symbol name to be MESSAGE_LOGLEVEL_DEFAULT for consistency. And because the value of that symbol comes from a similarly-named config option, rename CONFIG_DEFAULT_MESSAGE_LOGLEVEL as well. Signed-off-by: Alex Elder <elder@linaro.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: John Stultz <john.stultz@linaro.org> Cc: Petr Mladek <pmladek@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07include/linux/byteorder/generic.h: minor comment fixGeoff Levand1-1/+1
Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07fs.h, drivers/hwmon/asus_atk0110.c: fix DEFINE_SIMPLE_ATTRIBUTE semicolon ↵Joe Perches1-1/+1
definition and use The DEFINE_SIMPLE_ATTRIBUTE macro should not end in a ; Fix the one use in the kernel tree that did not have a semicolon. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm/zpool: implement common zpool api to zbud/zsmallocDan Streetman1-0/+106
Add zpool api. zpool provides an interface for memory storage, typically of compressed memory. Users can select what backend to use; currently the only implementations are zbud, a low density implementation with up to two compressed pages per storage page, and zsmalloc, a higher density implementation with multiple compressed pages per storage page. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Tested-by: Seth Jennings <sjennings@variantweb.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Weijie Yang <weijie.yang@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm/zbud: change zbud_alloc size type to size_tDan Streetman1-1/+1
Change the type of the zbud_alloc() size param from unsigned int to size_t. Technically, this should not make any difference, as the zbud implementation already restricts the size to well within either type's limits; but as zsmalloc (and kmalloc) use size_t, and zpool will use size_t, this brings the size parameter type in line with zsmalloc/zpool. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Seth Jennings <sjennings@variantweb.net> Tested-by: Seth Jennings <sjennings@variantweb.net> Cc: Weijie Yang <weijie.yang@samsung.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mmu_notifier: add call_srcu and sync function for listener to delay call and ↵Peter Zijlstra1-0/+6
sync When kernel device drivers or subsystems want to bind their lifespan to t= he lifespan of the mm_struct, they usually use one of the following methods: 1. Manually calling a function in the interested kernel module. The funct= ion call needs to be placed in mmput. This method was rejected by several ker= nel maintainers. 2. Registering to the mmu notifier release mechanism. The problem with the latter approach is that the mmu_notifier_release cal= lback is called from__mmu_notifier_release (called from exit_mmap). That functi= on iterates over the list of mmu notifiers and don't expect the release call= back function to remove itself from the list. Therefore, the callback function= in the kernel module can't release the mmu_notifier_object, which is actuall= y the kernel module's object itself. As a result, the destruction of the kernel module's object must to be done in a delayed fashion. This patch adds support for this delayed callback, by adding a new mmu_notifier_call_srcu function that receives a function ptr and calls th= at function with call_srcu. In that function, the kernel module releases its object. To use mmu_notifier_call_srcu, the calling module needs to call b= efore that a new function called mmu_notifier_unregister_no_release that as its= name implies, unregisters a notifier without calling its notifier release call= back. This patch also adds a function that will call barrier_srcu so those kern= el modules can sync with mmu_notifier. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm: BUG when __kmap_atomic_idx equals KM_TYPE_NRChintan Pandya1-1/+1
__kmap_atomic_idx is per_cpu variable. Each CPU can use KM_TYPE_NR entries from FIXMAP i.e. from 0 to KM_TYPE_NR - 1. Allowing __kmap_atomic_idx to over- shoot to KM_TYPE_NR can mess up with next CPU's 0th entry which is a bug. Hence BUG_ON if __kmap_atomic_idx >= KM_TYPE_NR. Fix the off-by-on in this test. Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm, oom: rename zonelist locking functionsDavid Rientjes1-2/+2
try_set_zonelist_oom() and clear_zonelist_oom() are not named properly to imply that they require locking semantics to avoid out_of_memory() being reordered. zone_scan_lock is required for both functions to ensure that there is proper locking synchronization. Rename try_set_zonelist_oom() to oom_zonelist_trylock() and rename clear_zonelist_oom() to oom_zonelist_unlock() to imply there is proper locking semantics. At the same time, convert oom_zonelist_trylock() to return bool instead of int since only success and failure are tested. Signed-off-by: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm, oom: ensure memoryless node zonelist always includes zonesDavid Rientjes1-1/+10
With memoryless node support being worked on, it's possible that for optimizations that a node may not have a non-NULL zonelist. When CONFIG_NUMA is enabled and node 0 is memoryless, this means the zonelist for first_online_node may become NULL. The oom killer requires a zonelist that includes all memory zones for the sysrq trigger and pagefault out of memory handler. Ensure that a non-NULL zonelist is always passed to the oom killer. [akpm@linux-foundation.org: fix non-numa build] Signed-off-by: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07memory-hotplug: add zone_for_memory() for selecting zone for new memoryWang Nan1-0/+1
This series of patches fixes a problem when adding memory in bad manner. For example: for a x86_64 machine booted with "mem=400M" and with 2GiB memory installed, following commands cause problem: # echo 0x40000000 > /sys/devices/system/memory/probe [ 28.613895] init_memory_mapping: [mem 0x40000000-0x47ffffff] # echo 0x48000000 > /sys/devices/system/memory/probe [ 28.693675] init_memory_mapping: [mem 0x48000000-0x4fffffff] # echo online_movable > /sys/devices/system/memory/memory9/state # echo 0x50000000 > /sys/devices/system/memory/probe [ 29.084090] init_memory_mapping: [mem 0x50000000-0x57ffffff] # echo 0x58000000 > /sys/devices/system/memory/probe [ 29.151880] init_memory_mapping: [mem 0x58000000-0x5fffffff] # echo online_movable > /sys/devices/system/memory/memory11/state # echo online> /sys/devices/system/memory/memory8/state # echo online> /sys/devices/system/memory/memory10/state # echo offline> /sys/devices/system/memory/memory9/state [ 30.558819] Offlined Pages 32768 # free total used free shared buffers cached Mem: 780588 18014398509432020 830552 0 0 51180 -/+ buffers/cache: 18014398509380840 881732 Swap: 0 0 0 This is because the above commands probe higher memory after online a section with online_movable, which causes ZONE_HIGHMEM (or ZONE_NORMAL for systems without ZONE_HIGHMEM) overlaps ZONE_MOVABLE. After the second online_movable, the problem can be observed from zoneinfo: # cat /proc/zoneinfo ... Node 0, zone Movable pages free 65491 min 250 low 312 high 375 scanned 0 spanned 18446744073709518848 present 65536 managed 65536 ... This series of patches solve the problem by checking ZONE_MOVABLE when choosing zone for new memory. If new memory is inside or higher than ZONE_MOVABLE, makes it go there instead. After applying this series of patches, following are free and zoneinfo result (after offlining memory9): bash-4.2# free total used free shared buffers cached Mem: 780956 80112 700844 0 0 51180 -/+ buffers/cache: 28932 752024 Swap: 0 0 0 bash-4.2# cat /proc/zoneinfo Node 0, zone DMA pages free 3389 min 14 low 17 high 21 scanned 0 spanned 4095 present 3998 managed 3977 nr_free_pages 3389 ... start_pfn: 1 inactive_ratio: 1 Node 0, zone DMA32 pages free 73724 min 341 low 426 high 511 scanned 0 spanned 98304 present 98304 managed 92958 nr_free_pages 73724 ... start_pfn: 4096 inactive_ratio: 1 Node 0, zone Normal pages free 32630 min 120 low 150 high 180 scanned 0 spanned 32768 present 32768 managed 32768 nr_free_pages 32630 ... start_pfn: 262144 inactive_ratio: 1 Node 0, zone Movable pages free 65476 min 241 low 301 high 361 scanned 0 spanned 98304 present 65536 managed 65536 nr_free_pages 65476 ... start_pfn: 294912 inactive_ratio: 1 This patch (of 7): Introduce zone_for_memory() in arch independent code for arch_add_memory() use. Many arch_add_memory() function simply selects ZONE_HIGHMEM or ZONE_NORMAL and add new memory into it. However, with the existance of ZONE_MOVABLE, the selection method should be carefully considered: if new, higher memory is added after ZONE_MOVABLE is setup, the default zone and ZONE_MOVABLE may overlap each other. should_add_memory_movable() checks the status of ZONE_MOVABLE. If it has already contain memory, compare the address of new memory and movable memory. If new memory is higher than movable, it should be added into ZONE_MOVABLE instead of default zone. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Mel Gorman" <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm: describe mmap_sem rules for __lock_page_or_retry() and callersPaul Cassella1-0/+3
Add a comment describing the circumstances in which __lock_page_or_retry() will or will not release the mmap_sem when returning 0. Add comments to lock_page_or_retry()'s callers (filemap_fault(), do_swap_page()) noting the impact on VM_FAULT_RETRY returns. Add comments on up the call tree, particularly replacing the false "We return with mmap_sem still held" comments. Signed-off-by: Paul Cassella <cassella@cray.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm: page_alloc: reduce cost of the fair zone allocation policyMel Gorman1-0/+6
The fair zone allocation policy round-robins allocations between zones within a node to avoid age inversion problems during reclaim. If the first allocation fails, the batch counts are reset and a second attempt made before entering the slow path. One assumption made with this scheme is that batches expire at roughly the same time and the resets each time are justified. This assumption does not hold when zones reach their low watermark as the batches will be consumed at uneven rates. Allocation failure due to watermark depletion result in additional zonelist scans for the reset and another watermark check before hitting the slowpath. On UMA, the benefit is negligible -- around 0.25%. On 4-socket NUMA machine it's variable due to the variability of measuring overhead with the vmstat changes. The system CPU overhead comparison looks like 3.16.0-rc3 3.16.0-rc3 3.16.0-rc3 vanilla vmstat-v5 lowercost-v5 User 746.94 774.56 802.00 System 65336.22 32847.27 40852.33 Elapsed 27553.52 27415.04 27368.46 However it is worth noting that the overall benchmark still completed faster and intuitively it makes sense to take as few passes as possible through the zonelists. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm: move zone->pages_scanned into a vmstat counterMel Gorman1-1/+1
zone->pages_scanned is a write-intensive cache line during page reclaim and it's also updated during page free. Move the counter into vmstat to take advantage of the per-cpu updates and do not update it in the free paths unless necessary. On a small UMA machine running tiobench the difference is marginal. On a 4-node machine the overhead is more noticable. Note that automatic NUMA balancing was disabled for this test as otherwise the system CPU overhead is unpredictable. 3.16.0-rc3 3.16.0-rc3 3.16.0-rc3 vanillarearrange-v5 vmstat-v5 User 746.94 759.78 774.56 System 65336.22 58350.98 32847.27 Elapsed 27553.52 27282.02 27415.04 Note that the overhead reduction will vary depending on where exactly pages are allocated and freed. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm: rearrange zone fields into read-only, page alloc, statistics and page ↵Mel Gorman1-103/+108
reclaim lines The arrangement of struct zone has changed over time and now it has reached the point where there is some inappropriate sharing going on. On x86-64 for example o The zone->node field is shared with the zone lock and zone->node is accessed frequently from the page allocator due to the fair zone allocation policy. o span_seqlock is almost never used by shares a line with free_area o Some zone statistics share a cache line with the LRU lock so reclaim-intensive and allocator-intensive workloads can bounce the cache line on a stat update This patch rearranges struct zone to put read-only and read-mostly fields together and then splits the page allocator intensive fields, the zone statistics and the page reclaim intensive fields into their own cache lines. Note that the type of lowmem_reserve changes due to the watermark calculations being signed and avoiding a signed/unsigned conversion there. On the test configuration I used the overall size of struct zone shrunk by one cache line. On smaller machines, this is not likely to be noticable. However, on a 4-node NUMA machine running tiobench the system CPU overhead is reduced by this patch. 3.16.0-rc3 3.16.0-rc3 vanillarearrange-v5r9 User 746.94 759.78 System 65336.22 58350.98 Elapsed 27553.52 27282.02 Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm: pagemap: avoid unnecessary overhead when tracepoints are deactivatedMel Gorman1-9/+7
This was formerly the series "Improve sequential read throughput" which noted some major differences in performance of tiobench since 3.0. While there are a number of factors, two that dominated were the introduction of the fair zone allocation policy and changes to CFQ. The behaviour of fair zone allocation policy makes more sense than tiobench as a benchmark and CFQ defaults were not changed due to insufficient benchmarking. This series is what's left. It's one functional fix to the fair zone allocation policy when used on NUMA machines and a reduction of overhead in general. tiobench was used for the comparison despite its flaws as an IO benchmark as in this case we are primarily interested in the overhead of page allocator and page reclaim activity. On UMA, it makes little difference to overhead 3.16.0-rc3 3.16.0-rc3 vanilla lowercost-v5 User 383.61 386.77 System 403.83 401.74 Elapsed 5411.50 5413.11 On a 4-socket NUMA machine it's a bit more noticable 3.16.0-rc3 3.16.0-rc3 vanilla lowercost-v5 User 746.94 802.00 System 65336.22 40852.33 Elapsed 27553.52 27368.46 This patch (of 6): The LRU insertion and activate tracepoints take PFN as a parameter forcing the overhead to the caller. Move the overhead to the tracepoint fast-assign method to ensure the cost is only incurred when the tracepoint is active. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm/vmalloc.c: clean up map_vm_area third argumentWANG Chao1-1/+1
Currently map_vm_area() takes (struct page *** pages) as third argument, and after mapping, it moves (*pages) to point to (*pages + nr_mappped_pages). It looks like this kind of increment is useless to its caller these days. The callers don't care about the increments and actually they're trying to avoid this by passing another copy to map_vm_area(). The caller can always guarantee all the pages can be mapped into vm_area as specified in first argument and the caller only cares about whether map_vm_area() fails or not. This patch cleans up the pointer movement in map_vm_area() and updates its callers accordingly. Signed-off-by: WANG Chao <chaowang@redhat.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm: make copy_pte_range static againJerome Marchand1-4/+0
Commit 71e3aac0724f ("thp: transparent hugepage core") adds copy_pte_range prototype to huge_mm.h. I'm not sure why (or if) this function have been used outside of memory.c, but it currently isn't. This patch makes copy_pte_range() static again. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm, hugetlb: remove hugetlb_zero and hugetlb_infinityDavid Rientjes1-1/+0
They are unnecessary: "zero" can be used in place of "hugetlb_zero" and passing extra2 == NULL is equivalent to infinity. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm: replace init_page_accessed by __SetPageReferencedHugh Dickins1-1/+0
Do we really need an exported alias for __SetPageReferenced()? Its callers better know what they're doing, in which case the page would not be already marked referenced. Kill init_page_accessed(), just __SetPageReferenced() inline. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07include/linux/mmdebug.h: add VM_WARN_ONCE()Andrew Morton1-0/+2
It was missing... Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm tracing: tell mm_migrate_pages event about numa_misplacedMax Asbock1-0/+1
The mm_migrate_pages trace event reports a reason for the migration, typically as a symbolic string. The exception is the reason MR_NUMA_MISPLACED for which it just displays the numeric value: mm_migrate_pages: nr_succeeded=1 nr_failed=0 mode=MIGRATE_ASYNC reason=0x5 This patch makes the output consistent by introducing a string value for MR_NUMA_MISPLACED. The event is then reported as: mm_migrate_pages: nr_succeeded=1 nr_failed=0 mode=MIGRATE_ASYNC reason=numa_misplaced Signed-off-by: Max Asbock <masbock@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>