summaryrefslogtreecommitdiff
path: root/include/xen/arm
AgeCommit message (Collapse)AuthorFilesLines
2019-09-11swiotlb-xen: simplify cache maintainanceChristoph Hellwig1-63/+0
Now that we know we always have the dma-noncoherent.h helpers available if we are on an architecture with support for non-coherent devices, we can just call them directly, and remove the calls to the dma-direct routines, including the fact that we call the dma_direct_map_page routines but ignore the value returned from it. Instead we now have Xen wrappers for the arch_sync_dma_for_{device,cpu} helpers that call the special Xen versions of those routines for foreign pages. Note that the new helpers get the physical address passed in addition to the dma address to avoid another translation for the local cache maintainance. The pfn_valid checks remain on the dma address as in the old code, even if that looks a little funny. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-09-11swiotlb-xen: use the same foreign page check everywhereChristoph Hellwig1-22/+9
xen_dma_map_page uses a different and more complicated check for foreign pages than the other three cache maintainance helpers. Switch it to the simpler pfn_valid method a well, and document the scheme with a single improved comment in xen_dma_map_page. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11xen/arm: remove xen_dma_opsChristoph Hellwig1-2/+0
arm and arm64 can just use xen_swiotlb_dma_ops directly like x86, no need for a pointer indirection. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11xen/arm: consolidate page-coherent.hChristoph Hellwig1-0/+80
Shared the duplicate arm/arm64 code in include/xen/arm/page-coherent.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-01-24arm64/xen: fix xen-swiotlb cache flushingChristoph Hellwig1-94/+3
Xen-swiotlb hooks into the arm/arm64 arch code through a copy of the DMA DMA mapping operations stored in the struct device arch data. Switching arm64 to use the direct calls for the merged DMA direct / swiotlb code broke this scheme. Replace the indirect calls with direct-calls in xen-swiotlb as well to fix this problem. Fixes: 356da6d0cde3 ("dma-mapping: bypass indirect calls for dma-direct") Reported-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman4-0/+4
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-19xen, arm64: drop dummy lookup_address()Tycho Andersen1-10/+0
This is unused, and conflicts with the definition that we'll add for XPFO. Signed-off-by: Tycho Andersen <tycho@docker.com> Reviewed-by: Julien Grall <julien.grall@arm.com> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: Juergen Gross <jgross@suse.com> CC: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-06-08xen: fix HYPERVISOR_dm_op() prototypeSergey Dyasli1-1/+4
Change the third parameter to be the required struct xen_dm_op_buf * instead of a generic void * (which blindly accepts any pointer). Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_opsStefano Stabellini1-10/+10
Now that __generic_dma_ops is a xen specific function, rename it to xen_get_dma_ops. Change all the call sites appropriately. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: linux@armlinux.org.uk CC: catalin.marinas@arm.com CC: will.deacon@arm.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: Julien Grall <julien.grall@arm.com>
2017-05-02xen/arm,arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..."Stefano Stabellini1-0/+8
The following commit: commit 815dd18788fe0d41899f51b91d0560279cf16b0d Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Fri Jan 20 13:04:04 2017 -0800 treewide: Consolidate get_dma_ops() implementations rearranges get_dma_ops in a way that xen_dma_ops are not returned when running on Xen anymore, dev->dma_ops is returned instead (see arch/arm/include/asm/dma-mapping.h:get_arch_dma_ops and include/linux/dma-mapping.h:get_dma_ops). Fix the problem by storing dev->dma_ops in dev_archdata, and setting dev->dma_ops to xen_dma_ops. This way, xen_dma_ops is returned naturally by get_dma_ops. The Xen code can retrieve the original dev->dma_ops from dev_archdata when needed. It also allows us to remove __generic_dma_ops from common headers. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Tested-by: Julien Grall <julien.grall@arm.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> [4.11+] CC: linux@armlinux.org.uk CC: catalin.marinas@arm.com CC: will.deacon@arm.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: Julien Grall <julien.grall@arm.com>
2017-02-26Merge tag 'for-next-dma_ops' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-02-14xen/privcmd: Add IOCTL_PRIVCMD_DM_OPPaul Durrant1-0/+1
Recently a new dm_op[1] hypercall was added to Xen to provide a mechanism for restricting device emulators (such as QEMU) to a limited set of hypervisor operations, and being able to audit those operations in the kernel of the domain in which they run. This patch adds IOCTL_PRIVCMD_DM_OP as gateway for __HYPERVISOR_dm_op. NOTE: There is no requirement for user-space code to bounce data through locked memory buffers (as with IOCTL_PRIVCMD_HYPERCALL) since privcmd has enough information to lock the original buffers directly. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=524a98c2 Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-01-24treewide: Constify most dma_map_ops structuresBart Van Assche1-1/+1
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-02arm/arm64: xen: Move shared architecture headers to include/xen/armMarc Zyngier5-0/+431
ARM and arm64 Xen ports share a number of headers, leading to packaging issues when these headers needs to be exported, as it breaks the reasonable requirement that an architecture port has self-contained headers. Fix the issue by moving the 5 header files to include/xen/arm, and keep local placeholders to include the relevant files. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>