| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 2293c57484ae64c9a3c847c8807db8c26a3a4d41 upstream.
During the connection establishment, a peer can tell the other one that
it cannot establish new subflows to the initial IP address and port by
setting the 'C' flag [1]. Doing so makes sense when the sender is behind
a strict NAT, operating behind a legacy Layer 4 load balancer, or using
anycast IP address for example.
When this 'C' flag is set, the path-managers must then not try to
establish new subflows to the other peer's initial IP address and port.
The in-kernel PM has access to this info, but the userspace PM didn't.
The RFC8684 [1] is strict about that:
(...) therefore the receiver MUST NOT try to open any additional
subflows toward this address and port.
So it is important to tell the userspace about that as it is responsible
for the respect of this flag.
When a new connection is created and established, the Netlink events
now contain the existing but not currently used 'flags' attribute. When
MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 is set, it means no other subflows
to the initial IP address and port -- info that are also part of the
event -- can be established.
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.1-20.6 [1]
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/532
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-2-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in mptcp_pm.yaml, because the indentation has been modified
in commit ec362192aa9e ("netlink: specs: fix up indentation errors"),
which is not in this version. Applying the same modifications, but at
a different level. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c27973211ffcdf0a092eec265d5993e64b89adaf ]
commit 907a99c314a5 ("md: rename recovery_cp to resync_offset") replaces
recovery_cp with resync_offset in mdp_superblock_s which is in md_p.h.
md_p.h is used in userspace too. So mdadm building fails because of this.
This patch revert this change.
Fixes: 907a99c314a5 ("md: rename recovery_cp to resync_offset")
Signed-off-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/linux-raid/20250815040028.18085-1-xni@redhat.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4039ce7ef40474d5ba46f414c50cc7020b9cf8ae ]
This new attribute is supposed to be used instead of NFTA_DEVICE_NAME
for simple wildcard interface specs. It holds a NUL-terminated string
representing an interface name prefix to match on.
While kernel code to distinguish full names from prefixes in
NFTA_DEVICE_NAME is simpler than this solution, reusing the existing
attribute with different semantics leads to confusion between different
versions of kernel and user space though:
* With old kernels, wildcards submitted by user space are accepted yet
silently treated as regular names.
* With old user space, wildcards submitted by kernel may cause crashes
since libnftnl expects NUL-termination when there is none.
Using a distinct attribute type sanitizes these situations as the
receiving part detects and rejects the unexpected attribute nested in
*_HOOK_DEVS attributes.
Fixes: 6d07a289504a ("netfilter: nf_tables: Support wildcard netdev hook specs")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24fc631539cc78225f5c61f99c7666fcff48024d ]
The VHOST_[GS]ET_FEATURES_ARRAY ioctl already took 0x83 and it would
result in a build error when the vhost uapi header is used for perf tool
build like below.
In file included from trace/beauty/ioctl.c:93:
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c: In function ‘ioctl__scnprintf_vhost_virtio_cmd’:
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c:36:18: error: initialized field overwritten [-Werror=override-init]
36 | [0x83] = "SET_FORK_FROM_OWNER",
| ^~~~~~~~~~~~~~~~~~~~~
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c:36:18: note: (near initialization for ‘vhost_virtio_ioctl_cmds[131]’)
Fixes: 7d9896e9f6d02d8a ("vhost: Reintroduce kthread API and add mode selection")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Message-Id: <20250819063958.833770-1-namhyung@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 907a99c314a5a695e35acff78ac61f4ec950a6d3 ]
'recovery_cp' was used to represent the progress of sync, but its name
contains recovery, which can cause confusion. Replaces 'recovery_cp'
with 'resync_offset' for clarity.
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250722033340.1933388-1-linan666@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Stable-dep-of: b7ee30f0efd1 ("md: fix sync_action incorrect display during resync")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8151320c747efb22d30b035af989fed0d502176e upstream.
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
Fixes: 0db89fa243e5 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Reported-by: "Govindarajulu, Hariganesh" <hariganesh.govindarajulu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250722143233.3970607-1-yu.c.chen@intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 31557b3487b349464daf42bc4366153743c1e727 ]
A decade ago commit 6d08acd2d32e ("in6: fix conflict with glibc")
hid the definitions of IPV6 options, because GCC was complaining
about duplicates. The commit did not list the warnings seen, but
trying to recreate them now I think they are (building iproute2):
In file included from ./include/uapi/rdma/rdma_user_cm.h:39,
from rdma.h:16,
from res.h:9,
from res-ctx.c:7:
../include/uapi/linux/in6.h:171:9: warning: ‘IPV6_ADD_MEMBERSHIP’ redefined
171 | #define IPV6_ADD_MEMBERSHIP 20
| ^~~~~~~~~~~~~~~~~~~
In file included from /usr/include/netinet/in.h:37,
from rdma.h:13:
/usr/include/bits/in.h:233:10: note: this is the location of the previous definition
233 | # define IPV6_ADD_MEMBERSHIP IPV6_JOIN_GROUP
| ^~~~~~~~~~~~~~~~~~~
../include/uapi/linux/in6.h:172:9: warning: ‘IPV6_DROP_MEMBERSHIP’ redefined
172 | #define IPV6_DROP_MEMBERSHIP 21
| ^~~~~~~~~~~~~~~~~~~~
/usr/include/bits/in.h:234:10: note: this is the location of the previous definition
234 | # define IPV6_DROP_MEMBERSHIP IPV6_LEAVE_GROUP
| ^~~~~~~~~~~~~~~~~~~~
Compilers don't complain about redefinition if the defines
are identical, but here we have the kernel using the literal
value, and glibc using an indirection (defining to a name
of another define, with the same numerical value).
Problem is, the commit in question hid all the IPV6 socket
options, and glibc has a pretty sparse list. For instance
it lacks Flow Label related options. Willem called this out
in commit 3fb321fde22d ("selftests/net: ipv6 flowlabel"):
/* uapi/glibc weirdness may leave this undefined */
#ifndef IPV6_FLOWINFO
#define IPV6_FLOWINFO 11
#endif
More interestingly some applications (socat) use
a #ifdef IPV6_FLOWINFO to gate compilation of thier
rudimentary flow label support. (For added confusion
socat misspells it as IPV4_FLOWINFO in some places.)
Hide only the two defines we know glibc has a problem
with. If we discover more warnings we can hide more
but we should avoid covering the entire block of
defines for "IPV6 socket options".
Link: https://patch.msgid.link/20250609143933.1654417-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cf73d9970ea4f8cace5d8f02d2565a2723003112 upstream.
__kernel_rwf_t is defined as int, the actual size of which is
implementation defined. It won't go well if some compiler / archs
ever defines it as i64, so replace it with __u32, hoping that
there is no one using i16 for it.
Cc: stable@vger.kernel.org
Fixes: 2b188cc1bb857 ("Add io_uring IO interface")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/47c666c4ee1df2018863af3a2028af18feef11ed.1751412511.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 86624ba3b522b6512def25534341da93356c8da4 ]
This was missed during the initial implementation. The VFIO PCI encodes
the vf_token inside the device name when opening the device from the group
FD, something like:
"0000:04:10.0 vf_token=bd8d9d2b-5a5f-4f5a-a211-f591514ba1f3"
This is used to control access to a VF unless there is co-ordination with
the owner of the PF.
Since we no longer have a device name in the cdev path, pass the token
directly through VFIO_DEVICE_BIND_IOMMUFD using an optional field
indicated by VFIO_DEVICE_BIND_FLAG_TOKEN.
Fixes: 5fcc26969a16 ("vfio: Add VFIO_DEVICE_BIND_IOMMUFD")
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v3-bdd8716e85fe+3978a-vfio_token_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d9896e9f6d02d8aa85e63f736871f96c59a5263 ]
Since commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"),
the vhost uses vhost_task and operates as a child of the
owner thread. This is required for correct CPU usage accounting,
especially when using containers.
However, this change has caused confusion for some legacy
userspace applications, and we didn't notice until it's too late.
Unfortunately, it's too late to revert - we now have userspace
depending both on old and new behaviour :(
To address the issue, reintroduce kthread mode for vhost workers and
provide a configuration to select between kthread and task worker.
- Add 'fork_owner' parameter to vhost_dev to let users select kthread
or task mode. Default mode is task mode(VHOST_FORK_OWNER_TASK).
- Reintroduce kthread mode support:
* Bring back the original vhost_worker() implementation,
and renamed to vhost_run_work_kthread_list().
* Add cgroup support for the kthread
* Introduce struct vhost_worker_ops:
- Encapsulates create / stop / wake‑up callbacks.
- vhost_worker_create() selects the proper ops according to
inherit_owner.
- Userspace configuration interface:
* New IOCTLs:
- VHOST_SET_FORK_FROM_OWNER lets userspace select task mode
(VHOST_FORK_OWNER_TASK) or kthread mode (VHOST_FORK_OWNER_KTHREAD)
- VHOST_GET_FORK_FROM_OWNER reads the current worker mode
* Expose module parameter 'fork_from_owner_default' to allow system
administrators to configure the default mode for vhost workers
* Kconfig option CONFIG_VHOST_ENABLE_FORK_OWNER_CONTROL controls whether
these IOCTLs and the parameter are available
- The VHOST_NEW_WORKER functionality requires fork_owner to be set
to true, with validation added to ensure proper configuration
This partially reverts or improves upon:
commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
commit 1cdaafa1b8b4 ("vhost: replace single worker pointer with xarray")
Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"),
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20250714071333.59794-2-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 771f002ef1d6f6c2b9bddf779abd31da6b9ccd25 ]
Commit 37d078e51b4c ("drm/xe/uapi: Split xe_sync types from flags") renamed some DRM_XE_SYNC_*
defines but later commits kept using the old names. Correct them with the new definition.
v2: correct fixes tag and update commit message to explain why (Lucas)
Fixes: 9329f0667215 ("drm/xe/uapi: Use LR abbrev for long-running vms")
Fixes: 4b437893a826 ("drm/xe/uapi: More uAPI documentation additions and cosmetic updates")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Zongyao Bai <zongyao.bai@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250608230133.1250849-1-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95cbab48782bf62e4093837dc15ac6133902c12f ]
drm_panthor_gpu_info::shader_present is currently automatically offset
by 4 byte to meet Arm's 32-bit/64-bit field alignment rules, but those
constraints don't stand on 32-bit x86 and cause a mismatch when running
an x86 binary in a user emulated environment like FEX. It's also
generally agreed that uAPIs should explicitly pad their struct fields,
which we originally intended to do, but a mistake slipped through during
the submission process, leading drm_panthor_gpu_info::shader_present to
be misaligned.
This uAPI change doesn't break any of the existing users of panthor
which are either arm32 or arm64 where the 64-bit alignment of
u64 fields is already enforced a the compiler level.
Changes in v2:
- Rename the garbage field into pad0 and adjust the comment accordingly
- Add Liviu's A-b
Changes in v3:
- Add R-bs
Fixes: 0f25e493a246 ("drm/panthor: Add uAPI")
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250606080932.4140010-2-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit 465b9ee0ee7bc268d7f261356afd6c4262e48d82.
Such notifications fit better into core or nfnetlink_hook code,
following the NFNL_MSG_HOOK_GET message format.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"Many patches, pretty much all of them small, that accumulated while I
was on vacation.
ARM:
- Remove the last leftovers of the ill-fated FPSIMD host state
mapping at EL2 stage-1
- Fix unexpected advertisement to the guest of unimplemented S2 base
granule sizes
- Gracefully fail initialising pKVM if the interrupt controller isn't
GICv3
- Also gracefully fail initialising pKVM if the carveout allocation
fails
- Fix the computing of the minimum MMIO range required for the host
on stage-2 fault
- Fix the generation of the GICv3 Maintenance Interrupt in nested
mode
x86:
- Reject SEV{-ES} intra-host migration if one or more vCPUs are
actively being created, so as not to create a non-SEV{-ES} vCPU in
an SEV{-ES} VM
- Use a pre-allocated, per-vCPU buffer for handling de-sparsification
of vCPU masks in Hyper-V hypercalls; fixes a "stack frame too
large" issue
- Allow out-of-range/invalid Xen event channel ports when configuring
IRQ routing, to avoid dictating a specific ioctl() ordering to
userspace
- Conditionally reschedule when setting memory attributes to avoid
soft lockups when userspace converts huge swaths of memory to/from
private
- Add back MWAIT as a required feature for the MONITOR/MWAIT selftest
- Add a missing field in struct sev_data_snp_launch_start that
resulted in the guest-visible workarounds field being filled at the
wrong offset
- Skip non-canonical address when processing Hyper-V PV TLB flushes
to avoid VM-Fail on INVVPID
- Advertise supported TDX TDVMCALLs to userspace
- Pass SetupEventNotifyInterrupt arguments to userspace
- Fix TSC frequency underflow"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: avoid underflow when scaling TSC frequency
KVM: arm64: Remove kvm_arch_vcpu_run_map_fp()
KVM: arm64: Fix handling of FEAT_GTG for unimplemented granule sizes
KVM: arm64: Don't free hyp pages with pKVM on GICv2
KVM: arm64: Fix error path in init_hyp_mode()
KVM: arm64: Adjust range correctly during host stage-2 faults
KVM: arm64: nv: Fix MI line level calculation in vgic_v3_nested_update_mi()
KVM: x86/hyper-v: Skip non-canonical addresses during PV TLB flush
KVM: SVM: Add missing member in SNP_LAUNCH_START command structure
Documentation: KVM: Fix unexpected unindent warnings
KVM: selftests: Add back the missing check of MONITOR/MWAIT availability
KVM: Allow CPU to reschedule while setting per-page memory attributes
KVM: x86/xen: Allow 'out of range' event channel ports in IRQ routing table.
KVM: x86/hyper-v: Use preallocated per-vCPU buffer for de-sparsified vCPU masks
KVM: SVM: Initialize vmsa_pa in VMCB to INVALID_PAGE if VMSA page is NULL
KVM: SVM: Reject SEV{-ES} intra host migration if vCPU creation is in-flight
KVM: TDX: Report supported optional TDVMCALLs in TDX capabilities
KVM: TDX: Exit to userspace for SetupEventNotifyInterrupt
|
|
BITS_PER_LONG does not exist in UAPI headers, so can't be used by the UAPI
__GENMASK(). Instead __BITS_PER_LONG needs to be used.
When __GENMASK() was introduced in commit 3c7a8e190bc5 ("uapi: introduce uapi-friendly macros for GENMASK"),
the code was fine. A broken revert in 1e7933a575ed ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
introduced the incorrect usage of BITS_PER_LONG.
That was fixed in commit 11fcf368506d ("uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again").
But a broken sync of the kernel headers with the tools/ headers in
commit fc92099902fb ("tools headers: Synchronize linux/bits.h with the kernel sources")
undid the fix.
Reapply the fix and while at it also fix the tools header.
Fixes: fc92099902fb ("tools headers: Synchronize linux/bits.h with the kernel sources")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
Pull block fixes from Jens Axboe:
- Fixes for ublk:
- fix C++ narrowing warnings in the uapi header
- update/improve UBLK_F_SUPPORT_ZERO_COPY comment in uapi header
- fix for the ublk ->queue_rqs() implementation, limiting a batch
to just the specific task AND ring
- ublk_get_data() error handling fix
- sanity check more arguments in ublk_ctrl_add_dev()
- selftest addition
- NVMe pull request via Christoph:
- reset delayed remove_work after reconnect
- fix atomic write size validation
- Fix for a warning introduced in bdev_count_inflight_rw() in this
merge window
* tag 'block-6.16-20250626' of git://git.kernel.dk/linux:
block: fix false warning in bdev_count_inflight_rw()
ublk: sanity check add_dev input for underflow
nvme: fix atomic write size validation
nvme: refactor the atomic write unit detection
nvme: reset delayed remove_work after reconnect
ublk: setup ublk_io correctly in case of ublk_get_data() failure
ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI header
ublk: fix narrowing warnings in UAPI header
selftests: ublk: don't take same backing file for more than one ublk devices
ublk: build batch from IOs in same io_ring_ctx and io task
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- bridge: fix use-after-free during router port configuration
Current release - new code bugs:
- eth: wangxun: fix the creation of page_pool
Previous releases - regressions:
- netpoll: initialize UDP checksum field before checksumming
- wifi: mac80211: finish link init before RCU publish
- bluetooth: fix use-after-free in vhci_flush()
- eth:
- ionic: fix DMA mapping test
- bnxt: properly flush XDP redirect lists
Previous releases - always broken:
- netlink: specs: enforce strict naming of properties
- unix: don't leave consecutive consumed OOB skbs.
- vsock: fix linux/vm_sockets.h userspace compilation errors
- selftests: fix TCP packet checksum"
* tag 'net-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: libwx: fix the creation of page_pool
net: selftests: fix TCP packet checksum
atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister().
netlink: specs: enforce strict naming of properties
netlink: specs: tc: replace underscores with dashes in names
netlink: specs: rt-link: replace underscores with dashes in names
netlink: specs: mptcp: replace underscores with dashes in names
netlink: specs: ovs_flow: replace underscores with dashes in names
netlink: specs: devlink: replace underscores with dashes in names
netlink: specs: dpll: replace underscores with dashes in names
netlink: specs: ethtool: replace underscores with dashes in names
netlink: specs: fou: replace underscores with dashes in names
netlink: specs: nfsd: replace underscores with dashes in names
net: enetc: Correct endianness handling in _enetc_rd_reg64
atm: idt77252: Add missing `dma_map_error()`
bnxt: properly flush XDP redirect lists
vsock/uapi: fix linux/vm_sockets.h userspace compilation errors
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
selftest: af_unix: Add tests for -ECONNRESET.
...
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp")
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UBLK_F_SUPPORT_ZERO_COPY has a very old comment describing the initial
idea for how zero-copy would be implemented. The actual implementation
added in commit 1f6540e2aabb ("ublk: zc register/unregister bvec") uses
io_uring registered buffers rather than shared memory mapping.
Remove the inaccurate remarks about mapping ublk request memory into the
ublk server's address space and requiring 4K block size. Replace them
with a description of the current zero-copy mechanism.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250621171015.354932-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When a C++ file compiled with -Wc++11-narrowing includes the UAPI header
linux/ublk_cmd.h, ublk_sqe_addr_to_auto_buf_reg()'s assignments of u64
values to u8, u16, and u32 fields result in compiler warnings. Add
explicit casts to the intended types to avoid these warnings. Drop the
unnecessary bitmasks.
Reported-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 99c1e4eb6a3f ("ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250621162842.337452-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a userspace application just include <linux/vm_sockets.h> will fail
to build with the following errors:
/usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’
182 | unsigned char svm_zero[sizeof(struct sockaddr) -
| ^~~~~~
/usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function)
183 | sizeof(sa_family_t) -
|
Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__)
where `struct sockaddr` and `sa_family_t` are defined.
We already do something similar in <linux/mptcp.h> and <linux/if.h>.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
missing synchronisation
- A small fix for the irqbypass hook fixes, tightening the check and
ensuring that we only deal with MSI for both the old and the new
route entry
- Rework the way the shadow LRs are addressed in a nesting
configuration, plugging an embarrassing bug as well as simplifying
the whole process
- Add yet another fix for the dreaded arch_timer_edge_cases selftest
RISC-V:
- Fix the size parameter check in SBI SFENCE calls
- Don't treat SBI HFENCE calls as NOPs
x86 TDX:
- Complete API for handling complex TDVMCALLs in userspace.
This was delayed because the spec lacked a way for userspace to
deny supporting these calls; the new exit code is now approved"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: TDX: Exit to userspace for GetTdVmCallInfo
KVM: TDX: Handle TDG.VP.VMCALL<GetQuote>
KVM: TDX: Add new TDVMCALL status code for unsupported subfuncs
KVM: arm64: VHE: Centralize ISBs when returning to host
KVM: arm64: Remove cpacr_clear_set()
KVM: arm64: Remove ad-hoc CPTR manipulation from kvm_hyp_handle_fpsimd()
KVM: arm64: Remove ad-hoc CPTR manipulation from fpsimd_sve_sync()
KVM: arm64: Reorganise CPTR trap manipulation
KVM: arm64: VHE: Synchronize CPTR trap deactivation
KVM: arm64: VHE: Synchronize restore of host debug registers
KVM: arm64: selftests: Close the GIC FD in arch_timer_edge_cases
KVM: arm64: Explicitly treat routing entry type changes as changes
KVM: arm64: nv: Fix tracking of shadow list registers
RISC-V: KVM: Don't treat SBI HFENCE calls as NOPs
RISC-V: KVM: Fix the size parameter check in SBI SFENCE calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix some file descriptor leaks that stand out with recent changes to
'perf list'
- Fix prctl include to fix building 'perf bench futex' hash with musl
libc
- Restrict 'perf test' uniquifying entry to machines with 'uncore_imc'
PMUs
- Document new output fields (op, cache, mem, dtlb, snoop) used with
'perf mem'
- Synchronize kernel header copies
* tag 'perf-tools-fixes-for-v6.16-1-2025-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools headers x86 cpufeatures: Sync with the kernel sources
perf bench futex: Fix prctl include in musl libc
perf test: Directory file descriptor leak
perf evsel: Missed close() when probing hybrid core PMUs
tools headers: Synchronize linux/bits.h with the kernel sources
tools arch amd ibs: Sync ibs.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers: Syncronize linux/build_bug.h with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync the drm/drm.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync kvm header with the kernel sources
tools headers x86 svm: Sync svm headers with the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
tools kvm headers arm64: Update KVM header from the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources to pick FUTEX knob
perf mem: Document new output fields (op, cache, mem, dtlb, snoop)
tools headers: Update the fs headers with the kernel sources
perf test: Restrict uniquifying test to machines with 'uncore_imc'
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Exit to userspace for TDG.VP.VMCALL<GetTdVmCallInfo> via KVM_EXIT_TDX,
to allow userspace to provide information about the support of
TDVMCALLs when r12 is 1 for the TDVMCALLs beyond the GHCI base API.
GHCI spec defines the GHCI base TDVMCALLs: <GetTdVmCallInfo>, <MapGPA>,
<ReportFatalError>, <Instruction.CPUID>, <#VE.RequestMMIO>,
<Instruction.HLT>, <Instruction.IO>, <Instruction.RDMSR> and
<Instruction.WRMSR>. They must be supported by VMM to support TDX guests.
For GetTdVmCallInfo
- When leaf (r12) to enumerate TDVMCALL functionality is set to 0,
successful execution indicates all GHCI base TDVMCALLs listed above are
supported.
Update the KVM TDX document with the set of the GHCI base APIs.
- When leaf (r12) to enumerate TDVMCALL functionality is set to 1, it
indicates the TDX guest is querying the supported TDVMCALLs beyond
the GHCI base TDVMCALLs.
Exit to userspace to let userspace set the TDVMCALL sub-function bit(s)
accordingly to the leaf outputs. KVM could set the TDVMCALL bit(s)
supported by itself when the TDVMCALLs don't need support from userspace
after returning from userspace and before entering guest. Currently, no
such TDVMCALLs implemented, KVM just sets the values returned from
userspace.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
[Adjust userspace API. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Handle TDVMCALL for GetQuote to generate a TD-Quote.
GetQuote is a doorbell-like interface used by TDX guests to request VMM
to generate a TD-Quote signed by a service hosting TD-Quoting Enclave
operating on the host. A TDX guest passes a TD Report (TDREPORT_STRUCT) in
a shared-memory area as parameter. Host VMM can access it and queue the
operation for a service hosting TD-Quoting enclave. When completed, the
Quote is returned via the same shared-memory area.
KVM only checks the GPA from the TDX guest has the shared-bit set and drops
the shared-bit before exiting to userspace to avoid bleeding the shared-bit
into KVM's exit ABI. KVM forwards the request to userspace VMM (e.g. QEMU)
and userspace VMM queues the operation asynchronously. KVM sets the return
code according to the 'ret' field set by userspace to notify the TDX guest
whether the request has been queued successfully or not. When the request
has been queued successfully, the TDX guest can poll the status field in
the shared-memory area to check whether the Quote generation is completed
or not. When completed, the generated Quote is returned via the same
buffer.
Add KVM_EXIT_TDX as a new exit reason to userspace. Userspace is
required to handle the KVM exit reason as the initial support for TDX,
by reentering KVM to ensure that the TDVMCALL is complete. While at it,
add a note that KVM_EXIT_HYPERCALL also requires reentry with KVM_RUN.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
[Adjust userspace API. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless.
The ath12k fix to avoid FW crashes requires adding support for a
number of new FW commands so it's quite large in terms of LoC. The
rest is relatively small.
Current release - fix to a fix:
- ptp: fix breakage after ptp_vclock_in_use() rework
Current release - regressions:
- openvswitch: allocate struct ovs_pcpu_storage dynamically, static
allocation may exhaust module loader limit on smaller systems
Previous releases - regressions:
- tcp: fix tcp_packet_delayed() for peers with no selective ACK
support
Previous releases - always broken:
- wifi: ath12k: don't activate more links than firmware supports
- tcp: make sure sockets open via passive TFO have valid NAPI ID
- eth: bnxt_en: update MRU and RSS table of RSS contexts on queue
reset, prevent Rx queues from silently hanging after queue reset
- NFC: uart: set tty->disc_data only in success path"
* tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: airoha: Differentiate hwfd buffer size for QDMA0 and QDMA1
net: airoha: Compute number of descriptors according to reserved memory size
tools: ynl: fix mixing ops and notifications on one socket
net: atm: fix /proc/net/atm/lec handling
net: atm: add lec_mutex
mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not available
net: airoha: Always check return value from airoha_ppe_foe_get_entry()
NFC: nci: uart: Set tty->disc_data only in success path
calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
MAINTAINERS: Remove Shannon Nelson from MAINTAINERS file
net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
eth: fbnic: avoid double free when failing to DMA-map FW msg
tcp: fix passive TFO socket having invalid NAPI ID
selftests: net: add test for passive TFO socket NAPI ID
selftests: net: add passive TFO test binary
selftests: netdevsim: improve lib.sh include in peer.sh
tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer
Octeontx2-pf: Fix Backpresure configuration
net: ftgmac100: select FIXED_PHY
net: ethtool: remove duplicate defines for family info
...
|
|
Commit under fixes switched to uAPI generation from the YAML
spec. A number of custom defines were left behind, mostly
for commands very hard to express in YAML spec.
Among what was left behind was the name and version of
the generic netlink family. Problem is that the codegen
always outputs those values so we ended up with a duplicated,
differently named set of defines.
Provide naming info in YAML and remove the incorrect defines.
Fixes: 8d0580c6ebdd ("ethtool: regenerate uapi header from the spec")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250617202240.811179-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To pick up the changes in this cset:
1e7933a575ed8af4 ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
5b572e8a9f3dcd6e ("bits: introduce fixed-type BIT_U*()")
19408200c094858d ("bits: introduce fixed-type GENMASK_U*()")
31299a5e02112411 ("bits: add comments and newlines to #if, #else and #endif directives")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/bits.h include/linux/bits.h
Please see tools/include/uapi/README for further details.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: I Hsin Cheng <richard120310@gmail.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/aEr0ZJ60EbshEy6p@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull bitmap fix from Yury Norov:
"Fix for __GENMASK() and __GENMASK_ULL() in UAPI"
* tag 'bitmap-for-6.16-rc2' of https://github.com/norov/linux:
uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again
|
|
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.16-rc1.
A little more churn than normal in this portion of the kernel for this
development cycle, Jiri and Nicholas were busy with cleanups and
reviews and fixes for the vt unicode handling logic which composed
most of the overall work in here.
Major changes are:
- vt unicode changes/reverts/changes from Nicholas. This should help
out a lot with screen readers and others that rely on vt console
support
- lock guard additions to the core tty/serial code to clean up lots
of error handling logic
- 8250 driver updates and fixes
- device tree conversions to yaml
- sh-sci driver updates
- other small cleanups and updates for serial drivers and tty core
portions
All of these have been in linux-next for 2 weeks with no reported issues"
* tag 'tty-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (105 commits)
tty: serial: 8250_omap: fix TX with DMA for am33xx
vt: add VT_GETCONSIZECSRPOS to retrieve console size and cursor position
vt: bracketed paste support
vt: remove VT_RESIZE and VT_RESIZEX from vt_compat_ioctl()
vt: process the full-width ASCII fallback range programmatically
vt: make use of ucs_get_fallback() when glyph is unavailable
vt: add ucs_get_fallback()
vt: create ucs_fallback_table.h_shipped with gen_ucs_fallback_table.py
vt: introduce gen_ucs_fallback_table.py to create ucs_fallback_table.h
vt: move glyph determination to a separate function
vt: make sure displayed double-width characters are remembered as such
vt: ucs.c: fix misappropriate in_range() usage
serial: max3100: Replace open-coded parity calculation with parity8()
dt-bindings: serial: 8250_omap: Drop redundant properties
dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema
dt-bindings: serial: Convert microchip,pic32mzda-uart to DT schema
dt-bindings: serial: Convert arm,sbsa-uart to DT schema
dt-bindings: serial: Convert snps,arc-uart to DT schema
dt-bindings: serial: Convert marvell,armada-3700-uart to DT schema
dt-bindings: serial: Convert lantiq,asc to DT schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
|
|
Pull drm fixes from Dave Airlie:
"This is pretty much two weeks worth of fixes, plus one thing that
might be considered next: amdkfd is now able to be enabled on risc-v
platforms.
Otherwise, amdgpu and xe with the majority of fixes, and then a
smattering all over.
panel:
- nt37801: fix IS_ERR
- nt37801: fix KConfig
connector:
- Fix null deref in HDMI audio helper.
bridge:
- analogix_dp: fixup clk-disable removal
nouveau:
- minor typo fix (',' vs ';')
msm:
- mailmap updates
i915:
- Fix the enabling/disabling of DP audio SDP splitting
- Fix PSR register definitions for ALPM
- Fix u32 overflow in SNPS PHY HDMI PLL setup
- Fix GuC pending message underflow when submit fails
- Fix GuC wakeref underflow race during reset
xe:
- Two documentation fixes
- A couple of vm init fixes
- Hwmon fixes
- Drop reduntant conversion to bool
- Fix CONFIG_INTEL_VSEC dependency
- Rework eviction rejection of bound external bos
- Stop re-submitting signalled jobs
- A couple of pxp fixes
- Add back a fix that got lost in a merge
- Create LRC bo without VM
- Fix for the above fix
amdgpu:
- UserQ fixes
- SMU 13.x fixes
- VCN fixes
- JPEG fixes
- Misc cleanups
- runtime pm fix
- DCN 4.0.1 fixes
- Misc display fixes
- ISP fix
- VRAM manager fix
- RAS fixes
- IP discovery fix
- Cleaner shader fix for GC 10.1.x
- OD fix
- Non-OLED panel fix
- Misc display fixes
- Brightness fixes
amdkfd:
- Enable CONFIG_HSA_AMD on RISCV
- SVM fix
- Misc cleanups
- Ref leak fix
- WPTR BO fix
radeon:
- Misc cleanups"
* tag 'drm-next-2025-06-06' of https://gitlab.freedesktop.org/drm/kernel: (105 commits)
drm/nouveau/vfn/r535: Convert comma to semicolon
drm/xe: remove unmatched xe_vm_unlock() from __xe_exec_queue_init()
drm/xe: Create LRC BO without VM
drm/xe/guc_submit: add back fix
drm/xe/pxp: Clarify PXP queue creation behavior if PXP is not ready
drm/xe/pxp: Use the correct define in the set_property_funcs array
drm/xe/sched: stop re-submitting signalled jobs
drm/xe: Rework eviction rejection of bound external bos
drm/xe/vsec: fix CONFIG_INTEL_VSEC dependency
drm/xe: drop redundant conversion to bool
drm/xe/hwmon: Move card reactive critical power under channel card
drm/xe/hwmon: Add support to manage power limits though mailbox
drm/xe/vm: move xe_svm_init() earlier
drm/xe/vm: move rebind_work init earlier
MAINTAINERS: .mailmap: update Rob Clark's email address
mailmap: Update entry for Akhil P Oommen
MAINTAINERS: update my email address
MAINTAINERS: drop myself as maintainer
drm/i915/display: Fix u32 overflow in SNPS PHY HDMI PLL setup
drm/amd/display: Fix default DC and AC levels
...
|
|
Commit 1e7933a575ed ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
did not take in account that the usage of BITS_PER_LONG in __GENMASK() was
changed to __BITS_PER_LONG for UAPI-safety in
commit 3c7a8e190bc5 ("uapi: introduce uapi-friendly macros for GENMASK").
BITS_PER_LONG can not be used in UAPI headers as it derives from the kernel
configuration and not from the current compiler invocation.
When building compat userspace code or a compat vDSO its value will be
incorrect.
Switch back to __BITS_PER_LONG.
Fixes: 1e7933a575ed ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- A couple of vm init fixes (Matt Auld)
- Hwmon fixes (Karthik)
- Drop reduntant conversion to bool (Raag)
- Fix CONFIG_INTEL_VSEC dependency (Arnd)
- Rework eviction rejection of bound external bos (Thomas)
- Stop re-submitting signalled jobs (Matt Auld)
- A couple of pxp fixes (Daniele)
- Add back a fix that got lost in a merge (Matt Auld)
- Create LRC bo without VM (Niranjana)
- Fix for the above fix (Maciej)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aEHq44uIAZwfK-mG@fedora
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place, fix
GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth:
- stmmac: prevent div by 0 when clock rate is misconfigured
- ice: fix Tx scheduler handling of XDP and changing queue count
- eth: fix support for the RGMII interface when delays configured"
* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
calipso: unlock rcu before returning -EAFNOSUPPORT
seg6: Fix validation of nexthop addresses
net: prevent a NULL deref in rtnl_create_link()
net: annotate data-races around cleanup_net_task
selftests: drv-net: tso: make bkg() wait for socat to quit
selftests: drv-net: tso: fix the GRE device name
selftests: drv-net: add configs for the TSO test
wireguard: device: enable threaded NAPI
netlink: specs: rt-link: decode ip6gre
netlink: specs: rt-link: add missing byte-order properties
net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
net: dsa: b53: do not touch DLL_IQQD on bcm53115
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
net: dsa: b53: do not configure bcm63xx's IMP port interface
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: do not enable EEE on bcm63xx
net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
...
|
|
The expected flow of operations when using PXP is to query the PXP
status and wait for it to transition to "ready" before attempting to
create an exec_queue. This flow is followed by the Mesa driver, but
there is no guarantee that an incorrectly coded (or malicious) app
will not attempt to create the queue first without querying the status.
Therefore, we need to clarify what the expected behavior of the queue
creation ioctl is in this scenario.
Currently, the ioctl always fails with an -EBUSY code no matter the
error, but for consistency it is better to distinguish between "failed
to init" (-EIO) and "not ready" (-EBUSY), the same way the query ioctl
does. Note that, while this is a change in the return code of an ioctl,
the behavior of the ioctl in this particular corner case was not clearly
spec'd, so no one should have been relying on it (and we know that Mesa,
which is the only known userspace for this, didn't).
v2: Minor rework of the doc (Rodrigo)
Fixes: 72d479601d67 ("drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queues")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250522225401.3953243-7-daniele.ceraolospurio@intel.com
(cherry picked from commit 21784ca96025b62d95b670b7639ad70ddafa69b8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- better error handling when reloading a table
- use use generic disable_* functions instead of open coding them
- lock queue limits when reading them
- remove unneeded kvfree from alloc_targets
- fix BLK_FEAT_ATOMIC_WRITES
- pass through operations on wrapped inline crypto keys
- dm-verity:
- use softirq context only when !need_resched()
- fix a memory leak if some arguments are specified multiple times
- dm-mpath:
- interface for explicit probing of active paths
- replace spin_lock_irqsave with spin_lock_irq
- dm-delay: don't busy-wait in kthread
- dm-bufio: remove maximum age based eviction
- dm-flakey: various fixes
- vdo indexer: don't read request structure after enqueuing
- dm-zone: Use bdev_*() helper functions where applicable
- dm-mirror: fix a tiny race condition
- dm-stripe: small code cleanup
* tag 'for-6.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm-stripe: small code cleanup
dm-verity: fix a memory leak if some arguments are specified multiple times
dm-mirror: fix a tiny race condition
dm-table: check BLK_FEAT_ATOMIC_WRITES inside limits_lock
dm mpath: replace spin_lock_irqsave with spin_lock_irq
dm-mpath: Don't grab work_mutex while probing paths
dm-zone: Use bdev_*() helper functions where applicable
dm vdo indexer: don't read request structure after enqueuing
dm: pass through operations on wrapped inline crypto keys
blk-crypto: export wrapped key functions
dm-table: Set BLK_FEAT_ATOMIC_WRITES for target queue limits
dm mpath: Interface for explicit probing of active paths
dm: Allow .prepare_ioctl to handle ioctls directly
dm-flakey: make corrupting read bios work
dm-flakey: remove useless ERROR_READS check in flakey_end_io
dm-flakey: error all IOs when num_features is absent
dm-flakey: Clean up parsing messages
dm: remove unneeded kvfree from alloc_targets
dm-bufio: remove maximum age based eviction
dm-verity: use softirq context only when !need_resched()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Remove tmp page copying in writeback path (Joanne).
This removes ~300 lines and with that a lot of complexity related to
avoiding reclaim related deadlock. The old mechanism is replaced with
a mapping flag that tells the MM not to block reclaim waiting for
writeback to complete. The MM parts have been reviewed/acked by
respective maintainers.
- Convert more code to handle large folios (Joanne). This still just
adds the code to deal with large folios and does not enable them yet.
- Allow invalidating all cached lookups atomically (Luis Henriques).
This feature is useful for CernVMFS, which currently does this
iteratively.
- Align write prefaulting in fuse with generic one (Dave Hansen)
- Fix race causing invalid data to be cached when setting attributes on
different nodes of a distributed fs (Guang Yuan Wu)
- Update documentation for passthrough (Chen Linxuan)
- Add fdinfo about the device number associated with an opened
/dev/fuse instance (Chen Linxuan)
- Increase readdir buffer size (Miklos). This depends on a patch to VFS
readdir code that was already merged through Christians tree.
- Optimize io-uring request expiration (Joanne)
- Misc cleanups
* tag 'fuse-update-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits)
fuse: increase readdir buffer size
readdir: supply dir_context.count as readdir buffer size hint
fuse: don't allow signals to interrupt getdents copying
fuse: support large folios for writeback
fuse: support large folios for readahead
fuse: support large folios for queued writes
fuse: support large folios for stores
fuse: support large folios for symlinks
fuse: support large folios for folio reads
fuse: support large folios for writethrough writes
fuse: refactor fuse_fill_write_pages()
fuse: support large folios for retrieves
fuse: support copying large folios
fs: fuse: add dev id to /dev/fuse fdinfo
docs: filesystems: add fuse-passthrough.rst
MAINTAINERS: update filter of FUSE documentation
fuse: fix race between concurrent setattrs from multiple nodes
fuse: remove tmp folio for writebacks and internal rb tree
mm: skip folio reclaim in legacy memcg contexts for deadlockable mappings
fuse: optimize over-io-uring request expiration check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
|
|
Currently, ublk_drv associates to each hardware queue (hctx) a unique
task (called the queue's ubq_daemon) which is allowed to issue
COMMIT_AND_FETCH commands against the hctx. If any other task attempts
to do so, the command fails immediately with EINVAL. When considered
together with the block layer architecture, the result is that for each
CPU C on the system, there is a unique ublk server thread which is
allowed to handle I/O submitted on CPU C. This can lead to suboptimal
performance under imbalanced load generation. For an extreme example,
suppose all the load is generated on CPUs mapping to a single ublk
server thread. Then that thread may be fully utilized and become the
bottleneck in the system, while other ublk server threads are totally
idle.
This issue can also be addressed directly in the ublk server without
kernel support by having threads dequeue I/Os and pass them around to
ensure even load. But this solution requires inter-thread communication
at least twice for each I/O (submission and completion), which is
generally a bad pattern for performance. The problem gets even worse
with zero copy, as more inter-thread communication would be required to
have the buffer register/unregister calls to come from the correct
thread.
Therefore, address this issue in ublk_drv by allowing each I/O to have
its own daemon task. Two I/Os in the same queue are now allowed to be
serviced by different daemon tasks - this was not possible before.
Imbalanced load can then be balanced across all ublk server threads by
having the ublk server threads issue FETCH_REQs in a round-robin manner.
As a small toy example, consider a system with a single ublk device
having 2 queues, each of depth 4. A ublk server having 4 threads could
issue its FETCH_REQs against this device as follows (where each entry is
the qid,tag pair that the FETCH_REQ targets):
ublk server thread: T0 T1 T2 T3
0,0 0,1 0,2 0,3
1,3 1,0 1,1 1,2
This setup allows for load that is concentrated on one hctx/ublk_queue
to be spread out across all ublk server threads, alleviating the issue
described above.
Add the new UBLK_F_PER_IO_DAEMON feature to ublk_drv, which ublk servers
can use to essentially test for the presence of this change and tailor
their behavior accordingly.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-1-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
2: __wsum diff, bool pseudohdr)
3: {
4: if (skb->ip_summed != CHECKSUM_PARTIAL) {
5: csum_replace_by_diff(sum, diff);
6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
7: skb->csum = ~csum_sub(diff, skb->csum);
8: } else if (pseudohdr) {
9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
10: }
11: }
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"Usual collection of driver fixes:
- Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw
- Further ODP functionality in rxe
- Remote access MRs in mana, along with more page sizes
- Improve CM scalability with a rwlock around the agent
- More trace points for hns
- ODP hmm conversion to the new two step dma API
- Support the ethernet HW device in mana as well as the RNIC
- Cleanups:
- Use secs_to_jiffies() when appropriate
- Use ERR_CAST() instead of naked casts
- Don't use %pK in printk
- Unusued functions removed
- Allocation type matching"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (57 commits)
RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work
RDMA/bnxt_re: Support extended stats for Thor2 VF
RDMA/hns: Fix endian issue in trace events
RDMA/mlx5: Avoid flexible array warning
IB/cm: Remove dead code and adjust naming
RDMA/core: Avoid hmm_dma_map_alloc() for virtual DMA devices
RDMA/rxe: Break endless pagefault loop for RO pages
RDMA/bnxt_re: Fix return code of bnxt_re_configure_cc
RDMA/bnxt_re: Fix missing error handling for tx_queue
RDMA/bnxt_re: Fix incorrect display of inactivity_cp in debugfs output
RDMA/mlx5: Add support for 200Gbps per lane speeds
RDMA/mlx5: Remove the redundant MLX5_IB_STAGE_UAR stage
RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction
net: mana: Add support for auxiliary device servicing events
RDMA/mana_ib: unify mana_ib functions to support any gdma device
RDMA/mana_ib: Add support of mana_ib for RNIC and ETH nic
net: mana: Probe rdma device in mana driver
RDMA/siw: replace redundant ternary operator with just rv
RDMA/umem: Separate implicit ODP initialization from explicit ODP
RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
"The changes are mostly business as usual. Besides pdx86 changes, there
are a few power supply changes needed for related pdx86 features, move
of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
warning to hid-asus.
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi:
- Add driver for Dasharo devices supporting fans and temperatures
monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace
using power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering
more than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to
new variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the
enlarged scope
- power supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and
"cell imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
docs: ABI: Fix "aassociated" to "associated"
platform/x86: Add AMD ISP platform config for OV05C10
Documentation: admin-guide: pm: Add documentation for die_id
platform/x86/intel-uncore-freq: Add attributes to show die_id
platform/x86/intel: power-domains: Add interface to get Linux die ID
Documentation: admin-guide: pm: Add documentation for agent_types
platform/x86/intel-uncore-freq: Add attributes to show agent types
platform/x86/tuxedo: Prevent invalid Kconfig state
platform/x86: dell-ddv: Expose the battery health to userspace
platform/x86: dell-ddv: Expose the battery manufacture date to userspace
platform/x86: dell-ddv: Implement the battery matching algorithm
power: supply: core: Add additional health status values
platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
platform/x86/amd/hsmp: Report power via hwmon sensors
platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
platform/mellanox: mlxreg-dpu: Fix smatch warnings
platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
...
|
|
Pull virtio updates from Michael Tsirkin:
- A new virtio RTC driver
- vhost scsi now logs write descriptors so migration works
- Some hardening work in virtio core
- An old spec compliance issue fixed in vhost net
- A couple of cleanups, fixes in vringh, virtio-pci, vdpa
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: reject shm region if length is zero
virtio_rtc: Add RTC class driver
virtio_rtc: Add Arm Generic Timer cross-timestamping
virtio_rtc: Add PTP clocks
virtio_rtc: Add module and driver core
vringh: use bvec_kmap_local
vhost: vringh: Use matching allocation type in resize_iovec()
virtio-pci: Fix result size returned for the admin command completion
vdpa/octeon_ep: Control PCI dev enabling manually
vhost-scsi: log event queue write descriptors
vhost-scsi: log control queue write descriptors
vhost-scsi: log I/O queue write descriptors
vhost-scsi: adjust vhost_scsi_get_desc() to log vring descriptors
vhost: modify vhost_log_write() for broader users
|
|
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit 7bcf7246c42a ('Merge
branch 'kvm-tdx-finish-initial' into HEAD')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits)
x86/tdx: mark tdh_vp_enter() as __flatten
Documentation: virt/kvm: remove unreferenced footnote
RISC-V: KVM: lock the correct mp_state during reset
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET
RISC-V: KVM: Remove scounteren initialization
KVM: RISC-V: remove unnecessary SBI reset state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
|
