| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
|
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
|
|
Pull io_uring updates from Jens Axboe:
"This is the first of the io_uring pull requests for the 6.15 merge
window, there will be others once the net tree has gone in. This
contains:
- Cleanup and unification of cancelation handling across various
request types.
- Improvement for bundles, supporting them both for incrementally
consumed buffers, and for non-multishot requests.
- Enable toggling of using iowait while waiting on io_uring events or
not. Unfortunately this is still tied with CPU frequency boosting
on short waits, as the scheduler side has not been very receptive
to splitting the (useless) iowait stat from the cpufreq implied
boost.
- Add support for kbuf nodes, enabling zero-copy support for the ublk
block driver.
- Various cleanups for resource node handling.
- Series greatly cleaning up the legacy provided (non-ring based)
buffers. For years, we've been pushing the ring provided buffers as
the way to go, and that is what people have been using. Reduce the
complexity and code associated with legacy provided buffers.
- Series cleaning up the compat handling.
- Series improving and cleaning up the recvmsg/sendmsg iovec and msg
handling.
- Series of cleanups for io-wq.
- Start adding a bunch of selftests. The liburing repository
generally carries feature and regression tests for everything, but
at least for ublk initially, we'll try and go the route of having
it in selftests as well. We'll see how this goes, might decide to
migrate more tests this way in the future.
- Various little cleanups and fixes"
* tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux: (108 commits)
selftests: ublk: add stripe target
selftests: ublk: simplify loop io completion
selftests: ublk: enable zero copy for null target
selftests: ublk: prepare for supporting stripe target
selftests: ublk: move common code into common.c
selftests: ublk: increase max buffer size to 1MB
selftests: ublk: add single sqe allocator helper
selftests: ublk: add generic_01 for verifying sequential IO order
selftests: ublk: fix starting ublk device
io_uring: enable toggle of iowait usage when waiting on CQEs
selftests: ublk: fix write cache implementation
selftests: ublk: add variable for user to not show test result
selftests: ublk: don't show `modprobe` failure
selftests: ublk: add one dependency header
io_uring/kbuf: enable bundles for incrementally consumed buffers
Revert "io_uring/rsrc: simplify the bvec iter count calculation"
selftests: ublk: improve test usability
selftests: ublk: add stress test for covering IO vs. killing ublk server
selftests: ublk: add one stress test for covering IO vs. removing device
selftests: ublk: load/unload ublk_drv when preparing & cleaning up tests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- platform: synopsys: hdmirx: Fix 64-bit division for 32-bit targets
- vim2m: print device name after registering device
- Synopsys DesignWare HDMI RX Driver and various fixes
- cec/printk fixes and the removal of the vidioc_g/s_ctrl and
vidioc_queryctrl callbacks
- AVerMedia H789-C PCIe support and rc-core structs padding
- Several camera sensor patches
- uvcvideo improvements
- visl: Fix ERANGE error when setting enum controls
- codec fixes
- V4L2 camera sensor patches mostly
- chips-media: wave5: Fixes
- Add SDM670 camera subsystem
- Qualcomm iris video decoder driver
- dt-bindings: update clocks for sc7280-camss
- various fixes and enhancements
* tag 'media/v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (264 commits)
media: pci: mgb4: include linux/errno.h
media: synopsys: hdmirx: Fix signedness bug in hdmirx_parse_dt()
media: platform: synopsys: hdmirx: Fix 64-bit division for 32-bit targets
media: vim2m: print device name after registering device
media: vivid: Introduce VIDEO_VIVID_OSD
media: vivid: Move all fb_info references into vivid-osd
media: platform: synopsys: hdmirx: Optimize struct snps_hdmirx_dev
media: platform: synopsys: hdmirx: Remove unused HDMI audio CODEC relics
media: platform: synopsys: hdmirx: Remove duplicated header inclusion
media: qcom: Clean up Kconfig dependencies
media: dvb-frontends: tda10048: Make the range of z explicit.
media: platform: stm32: Add check for clk_enable()
media: xilinx-tpg: fix double put in xtpg_parse_of()
media: siano: Fix error handling in smsdvb_module_init()
media: c8sectpfe: Call of_node_put(i2c_bus) only once in c8sectpfe_probe()
media: i2c: tda1997x: Call of_node_put(ep) only once in tda1997x_parse_dt()
dt-bindings: media: mediatek,vcodec: Revise description
dt-bindings: media: mediatek,jpeg: Relax IOMMU max item count
media: v4l2-dv-timings: prevent possible overflow in v4l2_detect_gtf()
media: rockchip: rga: fix rga offset lookup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Add support for running as the root partition in Hyper-V (Microsoft
Hypervisor) by exposing /dev/mshv (Nuno and various people)
- Add support for CPU offlining in Hyper-V (Hamza Mahfooz)
- Misc fixes and cleanups (Roman Kisel, Tianyu Lan, Wei Liu, Michael
Kelley, Thorsten Blum)
* tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: fix an indentation issue in mshyperv.h
x86/hyperv: Add comments about hv_vpset and var size hypercall input args
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs
hyperv: Add definitions for root partition driver to hv headers
x86: hyperv: Add mshv_handler() irq handler and setup function
Drivers: hv: Introduce per-cpu event ring tail
Drivers: hv: Export some functions for use by root partition module
acpi: numa: Export node_to_pxm()
hyperv: Introduce hv_recommend_using_aeoi()
arm64/hyperv: Add some missing functions to arm64
x86/mshyperv: Add support for extended Hyper-V features
hyperv: Log hypercall status codes as strings
x86/hyperv: Fix check of return value from snp_set_vmsa()
x86/hyperv: Add VTL mode callback for restarting the system
x86/hyperv: Add VTL mode emergency restart callback
hyperv: Remove unused union and structs
hyperv: Add CONFIG_MSHV_ROOT to gate root partition support
hyperv: Change hv_root_partition into a function
hyperv: Convert hypercall statuses to linux error codes
drivers/hv: add CPU offlining support
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
* tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (53 commits)
Bluetooth: MGMT: Add LL Privacy Setting
Bluetooth: hci_event: Fix handling of HCI_EV_LE_DIRECT_ADV_REPORT
Bluetooth: btnxpuart: Fix kernel panic during FW release
Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7
Bluetooth: btnxpuart: Add correct bootloader error codes
t blameBluetooth: btintel: Fix leading white space
Bluetooth: btintel: Add support to configure TX power
Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal
Bluetooth: btmtk: Remove the resetting step before downloading the fw
Bluetooth: SCO: add TX timestamping
Bluetooth: L2CAP: add TX timestamping
Bluetooth: ISO: add TX timestamping
Bluetooth: add support for skb TX SND/COMPLETION timestamping
net-timestamp: COMPLETION timestamp on packet tx completion
HCI: coredump: Log devcd dumps into the monitor
Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel
Bluetooth: hci_vhci: Mark Sync Flow Control as supported
Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO
Bluetooth: btintel_pci: Fix build warning
Bluetooth: btintel_pcie: Trigger device coredump on hardware exception
...
====================
Link: https://patch.msgid.link/20250325192925.2497890-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Fix a memory ordering issue in posix-timers
Posix-timer lookup is lockless and reevaluates the timer validity
under the timer lock, but the update which validates the timer is not
protected by the timer lock. That allows the store to be reordered
against the initialization stores, so that the lookup side can
observe a partially initialized timer. That's mostly a theoretical
problem, but incorrect nevertheless.
- Fix a long standing inconsistency of the coarse time getters
The coarse time getters read the base time of the current update
cycle without reading the actual hardware clock. NTP frequency
adjustment can set the base time backwards. The fine grained
interfaces compensate this by reading the clock and applying the new
conversion factor, but the coarse grained time getters use the base
time directly. That allows the user to observe time going backwards.
Cure it by always forwarding base time, when NTP changes the
frequency with an immediate step.
- Rework of posix-timer hashing
The posix-timer hash is not scalable and due to the CRIU timer
restore mechanism prone to massive contention on the global hash
bucket lock.
Replace the global hash lock with a fine grained per bucket locking
scheme to address that.
- Rework the proc/$PID/timers interface.
/proc/$PID/timers is provided for CRIU to be able to restore a timer.
The printout happens with sighand lock held and interrupts disabled.
That's not required as this can be done with RCU protection as well.
- Provide a sane mechanism for CRIU to restore a timer ID
CRIU restores timers by creating and deleting them until the kernel
internal per process ID counter reached the requested ID. That's
horribly slow for sparse timer IDs.
Provide a prctl() which allows CRIU to restore a timer with a given
ID. When enabled the ID pointer is used as input pointer to read the
requested ID from user space. When disabled, the normal allocation
scheme (next ID) is active as before. This is backwards compatible
for both kernel and user space.
- Make hrtimer_update_function() less expensive.
The sanity checks are valuable, but expensive for high frequency
usage in io/uring. Make the debug checks conditional and enable them
only when lockdep is enabled.
- Small updates, cleanups and improvements
* tag 'timers-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
selftests/timers: Improve skew_consistency by testing with other clockids
timekeeping: Fix possible inconsistencies in _COARSE clockids
posix-timers: Drop redundant memset() invocation
selftests/timers/posix-timers: Add a test for exact allocation mode
posix-timers: Provide a mechanism to allocate a given timer ID
posix-timers: Dont iterate /proc/$PID/timers with sighand:: Siglock held
posix-timers: Make per process list RCU safe
posix-timers: Avoid false cacheline sharing
posix-timers: Switch to jhash32()
posix-timers: Improve hash table performance
posix-timers: Make signal_struct:: Next_posix_timer_id an atomic_t
posix-timers: Make lock_timer() use guard()
posix-timers: Rework timer removal
posix-timers: Simplify lock/unlock_timer()
posix-timers: Use guards in a few places
posix-timers: Remove SLAB_PANIC from kmem cache
posix-timers: Remove a few paranoid warnings
posix-timers: Cleanup includes
posix-timers: Add cond_resched() to posix_timer_add() search loop
posix-timers: Initialise timer before adding it to the hash table
...
|
|
Add SOF_TIMESTAMPING_TX_COMPLETION, for requesting a software timestamp
when hardware reports a packet completed.
Completion tstamp is useful for Bluetooth, as hardware timestamps do not
exist in the HCI specification except for ISO packets, and the hardware
has a queue where packets may wait. In this case the software SND
timestamp only reflects the kernel-side part of the total latency
(usually small) and queue length (usually 0 unless HW buffers
congested), whereas the completion report time is more informative of
the true latency.
It may also be useful in other cases where HW TX timestamps cannot be
obtained and user wants to estimate an upper bound to when the TX
probably happened.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
struct virtio_net_rss_config was less useful in actual code because of a
flexible array placed in the middle. Add new structures that split it
into two to avoid having a flexible array in the middle.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20250321-virtio-v2-1-33afb8f4640b@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
More features for 6.15, major changes:
* cfg80211/mac80211: fix and enable link reconfiguration
* rtw88: support RTL8814AE/RTL8814AU
* mt7996: preparations for MLO
* ath12k: continued work on MLO
* iwlwifi: add new iwlmld sub-driver/op-mode for
some current and future devices
* wfx: wowlan support
* tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (311 commits)
wifi: mt76: mt7996: fix locking in mt7996_mac_sta_rc_work()
wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table
wifi: mt76: mt792x: re-register CHANCTX_STA_CSA only for the mt7921 series
wifi: mt76: mt7996: Update mt7996_tx to MLO support
wifi: mt76: mt7996: rework mt7996_ampdu_action to support MLO
wifi: mt76: mt7996: rework set/get_tsf callabcks to support MLO
wifi: mt76: mt7996: set vif default link_id adding/removing vif links
wifi: mt76: mt7996: rework mt7996_mcu_beacon_inband_discov to support MLO
wifi: mt76: mt7996: rework mt7996_mcu_add_obss_spr to support MLO
wifi: mt76: mt7996: rework mt7996_net_fill_forward_path to support MLO
wifi: mt76: mt7996: rework mt7996_update_mu_group to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_poll to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO
wifi: mt76: mt7996: remove mt7996_mac_enable_rtscts()
wifi: mt76: mt7996: rework mt7996_sta_hw_queue_read to support MLO
wifi: mt76: mt7996: rework mt7996_set_hw_key to support MLO
wifi: mt76: mt7996: Add mt7996_sta_link to mt7996_mcu_add_bss_info signature
wifi: mt76: mt7996: rework mt7996_sta_set_4addr and mt7996_sta_set_decap_offload to support MLO
wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO
wifi: mt76: mt7996: Rely on wcid_to_sta in mt7996_mac_add_txs_skb()
...
====================
Link: https://patch.msgid.link/20250320131106.33266-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 14a196807482 ("net: reorganize IP MIB values") changed
MIB values to group hot fields together.
Since then 5 new fields have been added without caring about
data locality.
This patch moves IPSTATS_MIB_OUTPKTS, IPSTATS_MIB_NOECTPKTS,
IPSTATS_MIB_ECT1PKTS, IPSTATS_MIB_ECT0PKTS, IPSTATS_MIB_CEPKTS
to the hot portion of per-cpu data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250320101434.3174412-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support adjusting/reading delayed ack max for socket level by using
set/getsockopt().
This option aligns with TCP_BPF_DELACK_MAX usage. Considering that bpf
option was implemented before this patch, so we need to use a standalone
new option for pure tcp set/getsockopt() use.
Add WRITE_ONCE/READ_ONCE() to prevent data-race if setsockopt()
happens to write one value to icsk_delack_max while icsk_delack_max is
being read.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250317120314.41404-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support adjusting/reading RTO MIN for socket level by using set/getsockopt().
This new option has the same effect as TCP_BPF_RTO_MIN, which means it
doesn't affect RTAX_RTO_MIN usage (by using ip route...). Considering that
bpf option was implemented before this patch, so we need to use a standalone
new option for pure tcp set/getsockopt() use.
When the socket is created, its icsk_rto_min is set to the default
value that is controlled by sysctl_tcp_rto_min_us. Then if application
calls setsockopt() with TCP_RTO_MIN_US flag to pass a valid value, then
icsk_rto_min will be overridden in jiffies unit.
This patch adds WRITE_ONCE/READ_ONCE to avoid data-race around
icsk_rto_min.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250317120314.41404-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core:
- Move perf_event sysctls into kernel/events/ (Joel Granados)
- Use POLLHUP for pinned events in error (Namhyung Kim)
- Avoid the read if the count is already updated (Peter Zijlstra)
- Allow the EPOLLRDNORM flag for poll (Tao Chen)
- locking/percpu-rwsem: Add guard support [ NOTE: this got
(mis-)merged into the perf tree due to related work ] (Peter
Zijlstra)
perf_pmu_unregister() related improvements: (Peter Zijlstra)
- Simplify the perf_event_alloc() error path
- Simplify the perf_pmu_register() error path
- Simplify perf_pmu_register()
- Simplify perf_init_event()
- Simplify perf_event_alloc()
- Merge struct pmu::pmu_disable_count into struct
perf_cpu_pmu_context::pmu_disable_count
- Add this_cpc() helper
- Introduce perf_free_addr_filters()
- Robustify perf_event_free_bpf_prog()
- Simplify the perf_mmap() control flow
- Further simplify perf_mmap()
- Remove retry loop from perf_mmap()
- Lift event->mmap_mutex in perf_mmap()
- Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes
- Fix perf_mmap() failure path
Uprobes:
- Harden x86 uretprobe syscall trampoline check (Jiri Olsa)
- Remove redundant spinlock in uprobe_deny_signal() (Liao Chang)
- Remove the spinlock within handle_singlestep() (Liao Chang)
x86 Intel PMU enhancements:
- Support PEBS counters snapshotting (Kan Liang)
- Fix intel_pmu_read_event() (Kan Liang)
- Extend per event callchain limit to branch stack (Kan Liang)
- Fix system-wide LBR profiling (Kan Liang)
- Allocate bts_ctx only if necessary (Li RongQing)
- Apply static call for drain_pebs (Peter Zijlstra)
x86 AMD PMU enhancements: (Ravi Bangoria)
- Remove pointless sample period check
- Fix ->config to sample period calculation for OP PMU
- Fix perf_ibs_op.cnt_mask for CurCnt
- Don't allow freq mode event creation through ->config interface
- Add PMU specific minimum period
- Add ->check_period() callback
- Ceil sample_period to min_period
- Add support for OP Load Latency Filtering
- Update DTLB/PageSize decode logic
Hardware breakpoints:
- Return EOPNOTSUPP for unsupported breakpoint type (Saket Kumar
Bhaskar)
Hardlockup detector improvements: (Li Huafei)
- perf_event memory leak
- Warn if watchdog_ev is leaked
Fixes and cleanups:
- Misc fixes and cleanups (Andy Shevchenko, Kan Liang, Peter
Zijlstra, Ravi Bangoria, Thorsten Blum, XieLudan)"
* tag 'perf-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
perf: Fix __percpu annotation
perf: Clean up pmu specific data
perf/x86: Remove swap_task_ctx()
perf/x86/lbr: Fix shorter LBRs call stacks for the system-wide mode
perf: Supply task information to sched_task()
perf: attach/detach PMU specific data
locking/percpu-rwsem: Add guard support
perf: Save PMU specific data in task_struct
perf: Extend per event callchain limit to branch stack
perf/ring_buffer: Allow the EPOLLRDNORM flag for poll
perf/core: Use POLLHUP for pinned events in error
perf/core: Use sysfs_emit() instead of scnprintf()
perf/core: Remove optional 'size' arguments from strscpy() calls
perf/x86/intel/bts: Check if bts_ctx is allocated when calling BTS functions
uprobes/x86: Harden uretprobe syscall trampoline check
watchdog/hardlockup/perf: Warn if watchdog_ev is leaked
watchdog/hardlockup/perf: Fix perf_event memory leak
perf/x86: Annotate struct bts_buffer::buf with __counted_by()
perf/core: Clean up perf_try_init_event()
perf/core: Fix perf_mmap() failure path
...
|
|
Pull bitmap updates from Yury Norov:
- cpumask_next_wrap() rework (me)
- GENMASK() simplification (I Hsin)
- rust bindings for cpumasks (Viresh and me)
- scattered cleanups (Andy, Tamir, Vincent, Ignacio and Joel)
* tag 'bitmap-for-6.15' of https://github.com/norov/linux: (22 commits)
cpumask: align text in comment
riscv: fix test_and_{set,clear}_bit ordering documentation
treewide: fix typo 'unsigned __init128' -> 'unsigned __int128'
MAINTAINERS: add rust bindings entry for bitmap API
rust: Add cpumask helpers
uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"
cpumask: drop cpumask_next_wrap_old()
PCI: hv: Switch hv_compose_multi_msi_req_get_cpu() to using cpumask_next_wrap()
scsi: lpfc: rework lpfc_next_{online,present}_cpu()
scsi: lpfc: switch lpfc_irq_rebalance() to using cpumask_next_wrap()
s390: switch stop_machine_yield() to using cpumask_next_wrap()
padata: switch padata_find_next() to using cpumask_next_wrap()
cpumask: use cpumask_next_wrap() where appropriate
cpumask: re-introduce cpumask_next{,_and}_wrap()
cpumask: deprecate cpumask_next_wrap()
powerpc/xmon: simplify xmon_batch_next_cpu()
ibmvnic: simplify ibmvnic_set_queue_affinity()
virtio_net: simplify virtnet_set_affinity()
objpool: rework objpool_pop()
cpumask: add for_each_{possible,online}_cpu_wrap
...
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a reasonably busy cycle for docs...
- Significant changes throughout the tree to bring Python code up to
current standards and raise the minimum Python required to 3.9
Much of this is preparatory to replacing the ancient Perl
scripts/kernel-doc horror with a slightly less horrifying Python
implementation, expected for 6.16
- Update the minimum Sphinx required to 3.4.3, allowing us to remove
a bunch of older compatibility code
- Rework and improve the generation of the ABI documentation
(All of the above done by Mauro)
- Lots of translation updates. Alex Shi and Yanteng Si are taking on
responsibility for the Chinese translations going forward; that
work will still get to you via docs-next
- Try to standardize the format for indicating a developer's
affiliation in commit tags
- Clarify the TAB's role in CoC enforcement actions
- Try to spell out the rules for when a commit tag can name another
developer without their explicit permission
Plus lots of other typo fixes and updates"
* tag 'docs-6.15' of git://git.lwn.net/linux: (98 commits)
docs/zh_CN: fix spelling mistake
docs/Chinese: change the disclaimer words
docs/zh_CN: Add snp-tdx-threat-model index Chinese translation
docs: driver-api: firmware: clarify userspace requirements
docs: clarify rules wrt tagging other people
docs: Remove outdated highuid.rst documentation
Documentation: dma-buf: heaps: Add heap name definitions
docs/.../submit-checklist: Use Documentation/admin-guide/abi.rst for cross-ref of README
docs: Correct installation instruction
Documentation: kcsan: fix "Plain Accesses and Data Races" URL in kcsan.rst
Documentation/CoC: Spell out the TAB role in enforcement decisions
Documentation: ocxl.rst: Update consortium site
scripts: get_feat.pl: substitute s390x with s390
scripts/kernel-doc: drop dead code for Wcontents_before_sections
scripts/kernel-doc: don't add not needed new lines
docs: driver-api/infiniband.rst: fix Kerneldoc markup
drivers: firewire: firewire-cdev.h: fix identation on a kernel-doc markup
drivers: media: intel-ipu3.h: fix identation on a kernel-doc markup
include/asm-generic/io.h: fix kerneldoc markup
Docs/arch/arm64: Fix spelling in amu.rst
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As usual, it's scattered changes all over. Patches touching things
outside of our traditional areas in the tree have been Acked by
maintainers or were trivial changes:
- loadpin: remove unsupported MODULE_COMPRESS_NONE (Arulpandiyan
Vadivel)
- samples/check-exec: Fix script name (Mickaël Salaün)
- yama: remove needless locking in yama_task_prctl() (Oleg Nesterov)
- lib/string_choices: Sort by function name (R Sundar)
- hardening: Allow default HARDENED_USERCOPY to be set at compile
time (Mel Gorman)
- uaccess: Split out compile-time checks into ucopysize.h
- kbuild: clang: Support building UM with SUBARCH=i386
- x86: Enable i386 FORTIFY_SOURCE on Clang 16+
- ubsan/overflow: Rework integer overflow sanitizer option
- Add missing __nonstring annotations for callers of
memtostr*()/strtomem*()
- Add __must_be_noncstr() and have memtostr*()/strtomem*() check for
it
- Introduce __nonstring_array for silencing future GCC 15 warnings"
* tag 'hardening-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
compiler_types: Introduce __nonstring_array
hardening: Enable i386 FORTIFY_SOURCE on Clang 16+
x86/build: Remove -ffreestanding on i386 with GCC
ubsan/overflow: Enable ignorelist parsing and add type filter
ubsan/overflow: Enable pattern exclusions
ubsan/overflow: Rework integer overflow sanitizer option to turn on everything
samples/check-exec: Fix script name
yama: don't abuse rcu_read_lock/get_task_struct in yama_task_prctl()
kbuild: clang: Support building UM with SUBARCH=i386
loadpin: remove MODULE_COMPRESS_NONE as it is no longer supported
lib/string_choices: Rearrange functions in sorted order
string.h: Validate memtostr*()/strtomem*() arguments more carefully
compiler.h: Introduce __must_be_noncstr()
nilfs2: Mark on-disk strings as nonstring
uapi: stddef.h: Introduce __kernel_nonstring
x86/tdx: Mark message.bytes as nonstring
string: kunit: Mark nonstring test strings as __nonstring
scsi: qla2xxx: Mark device strings as nonstring
scsi: mpt3sas: Mark device strings as nonstring
scsi: mpi3mr: Mark device strings as nonstring
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- elf: Define and use note name macros (Akihiko Odaki)
- elf: add remaining SHF_ flag macros (Timur Tabi)
- binfmt: Remove loader from linux_binprm struct (Yonatan Goldschmidt)
- binfmt_elf_fdpic: fix variable set but not used warning (sunliming)
* tag 'execve-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf_fdpic: fix variable set but not used warning
elf: add remaining SHF_ flag macros
binfmt: Remove loader from linux_binprm struct
crash: Remove KEXEC_CORE_NOTE_NAME
s390/crash: Use note name macros
crash: Use note name macros
powerpc/crash: Use note name macros
binfmt_elf: Use note name macros
elf: Define note name macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pidfs updates from Christian Brauner:
- Allow retrieving exit information after a process has been reaped
through pidfds via the new PIDFD_INTO_EXIT extension for the
PIDFD_GET_INFO ioctl. Various tools need access to information about
a process/task even after it has already been reaped.
Pidfd polling allows waiting on either task exit or for a task to
have been reaped. The contract for PIDFD_INFO_EXIT is simply that
EPOLLHUP must be observed before exit information can be retrieved,
i.e., exit information is only provided once the task has been reaped
and then can be retrieved as long as the pidfd is open.
- Add PIDFD_SELF_{THREAD,THREAD_GROUP} sentinels allowing userspace to
forgo allocating a file descriptor for their own process. This is
useful in scenarios where users want to act on their own process
through pidfds and is akin to AT_FDCWD.
- Improve premature thread-group leader and subthread exec behavior
when polling on pidfds:
(1) During a multi-threaded exec by a subthread, i.e.,
non-thread-group leader thread, all other threads in the
thread-group including the thread-group leader are killed and the
struct pid of the thread-group leader will be taken over by the
subthread that called exec. IOW, two tasks change their TIDs.
(2) A premature thread-group leader exit means that the thread-group
leader exited before all of the other subthreads in the
thread-group have exited.
Both cases lead to inconsistencies for pidfd polling with
PIDFD_THREAD. Any caller that holds a PIDFD_THREAD pidfd to the
current thread-group leader may or may not see an exit notification
on the file descriptor depending on when poll is performed. If the
poll is performed before the exec of the subthread has concluded an
exit notification is generated for the old thread-group leader. If
the poll is performed after the exec of the subthread has concluded
no exit notification is generated for the old thread-group leader.
The correct behavior is to simply not generate an exit notification
on the struct pid of a subhthread exec because the struct pid is
taken over by the subthread and thus remains alive.
But this is difficult to handle because a thread-group may exit
premature as mentioned in (2). In that case an exit notification is
reliably generated but the subthreads may continue to run for an
indeterminate amount of time and thus also may exec at some point.
After this pull no exit notifications will be generated for a
PIDFD_THREAD pidfd for a thread-group leader until all subthreads
have been reaped. If a subthread should exec before no exit
notification will be generated until that task exits or it creates
subthreads and repeates the cycle.
This means an exit notification indicates the ability for the father
to reap the child.
* tag 'vfs-6.15-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
selftests/pidfd: third test for multi-threaded exec polling
selftests/pidfd: second test for multi-threaded exec polling
selftests/pidfd: first test for multi-threaded exec polling
pidfs: improve multi-threaded exec and premature thread-group leader exit polling
pidfs: ensure that PIDFS_INFO_EXIT is available
selftests/pidfd: add seventh PIDFD_INFO_EXIT selftest
selftests/pidfd: add sixth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fifth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fourth PIDFD_INFO_EXIT selftest
selftests/pidfd: add third PIDFD_INFO_EXIT selftest
selftests/pidfd: add second PIDFD_INFO_EXIT selftest
selftests/pidfd: add first PIDFD_INFO_EXIT selftest
selftests/pidfd: expand common pidfd header
pidfs/selftests: ensure correct headers for ioctl handling
selftests/pidfd: fix header inclusion
pidfs: allow to retrieve exit information
pidfs: record exit code and cgroupid at exit
pidfs: use private inode slab cache
pidfs: move setting flags into pidfs_alloc_file()
pidfd: rely on automatic cleanup in __pidfd_prepare()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Mount notifications
The day has come where we finally provide a new api to listen for
mount topology changes outside of /proc/<pid>/mountinfo. A mount
namespace file descriptor can be supplied and registered with
fanotify to listen for mount topology changes.
Currently notifications for mount, umount and moving mounts are
generated. The generated notification record contains the unique
mount id of the mount.
The listmount() and statmount() api can be used to query detailed
information about the mount using the received unique mount id.
This allows userspace to figure out exactly how the mount topology
changed without having to generating diffs of /proc/<pid>/mountinfo
in userspace.
- Support O_PATH file descriptors with FSCONFIG_SET_FD in the new mount
api
- Support detached mounts in overlayfs
Since last cycle we support specifying overlayfs layers via file
descriptors. However, we don't allow detached mounts which means
userspace cannot user file descriptors received via
open_tree(OPEN_TREE_CLONE) and fsmount() directly. They have to
attach them to a mount namespace via move_mount() first.
This is cumbersome and means they have to undo mounts via umount().
Allow them to directly use detached mounts.
- Allow to retrieve idmappings with statmount
Currently it isn't possible to figure out what idmapping has been
attached to an idmapped mount. Add an extension to statmount() which
allows to read the idmapping from the mount.
- Allow creating idmapped mounts from mounts that are already idmapped
So far it isn't possible to allow the creation of idmapped mounts
from already idmapped mounts as this has significant lifetime
implications. Make the creation of idmapped mounts atomic by allow to
pass struct mount_attr together with the open_tree_attr() system call
allowing to solve these issues without complicating VFS lookup in any
way.
The system call has in general the benefit that creating a detached
mount and applying mount attributes to it becomes an atomic operation
for userspace.
- Add a way to query statmount() for supported options
Allow userspace to query which mount information can be retrieved
through statmount().
- Allow superblock owners to force unmount
* tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
umount: Allow superblock owners to force umount
selftests: add tests for mount notification
selinux: add FILE__WATCH_MOUNTNS
samples/vfs: fix printf format string for size_t
fs: allow changing idmappings
fs: add kflags member to struct mount_kattr
fs: add open_tree_attr()
fs: add copy_mount_setattr() helper
fs: add vfs_open_tree() helper
statmount: add a new supported_mask field
samples/vfs: add STATMOUNT_MNT_{G,U}IDMAP
selftests: add tests for using detached mount with overlayfs
samples/vfs: check whether flag was raised
statmount: allow to retrieve idmappings
uidgid: add map_id_range_up()
fs: allow detached mounts in clone_private_mount()
selftests/overlayfs: test specifying layers as O_PATH file descriptors
fs: support O_PATH fds with FSCONFIG_SET_FD
vfs: add notifications for mount attach and detach
fanotify: notify on mount attach and detach
...
|
|
Provide a set of IOCTLs for creating and managing child partitions when
running as root partition on Hyper-V. The new driver is enabled via
CONFIG_MSHV_ROOT.
A brief overview of the interface:
MSHV_CREATE_PARTITION is the entry point, returning a file descriptor
representing a child partition. IOCTLs on this fd can be used to map
memory, create VPs, etc.
Creating a VP returns another file descriptor representing that VP which
in turn has another set of corresponding IOCTLs for running the VP,
getting/setting state, etc.
MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be
used for a number of partition or VP hypercalls. This is for hypercalls
that do not affect any state in the kernel driver, such as getting and
setting VP registers and partition properties, translating addresses,
etc. It is "passthrough" because the binary input and output for the
hypercall is only interpreted by the VMM - the kernel driver does
nothing but insert the VP and partition id where necessary (which are
always in the same place), and execute the hypercall.
Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Co-developed-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Co-developed-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Co-developed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
|
|
This one is hilariously outdated, it provided a faster downlink over
TV cable for users of analog modems in the 1990s, through an ISA card.
The web page for the userspace tools has been broken for 25 years, and
the driver has only ever seen mechanical updates.
Link: http://web.archive.org/web/20000611165545/http://home.adelphia.net:80/~siglercm/sb1000.html
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312085236.2531870-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
By default, io_uring marks a waiting task as being in iowait, if it's
sleeping waiting on events and there are pending requests. This isn't
necessarily always useful, and may be confusing on non-storage setups
where iowait isn't expected. It can also cause extra power usage, by
preventing the CPU from entering lower sleep states.
This adds a new enter flag, IORING_ENTER_NO_IOWAIT. If set, then
io_uring will not account the sleeping task as being in iowait. If the
kernel supports this feature, then it will be marked by having the
IORING_FEAT_NO_IOWAIT feature flag set.
As the kernel currently does not support separating the iowait
accounting and CPU frequency boosting, the IORING_ENTER_NO_IOWAIT
controls both of these at the same time. In the future, if those do end
up being split, then it'd be possible to control them separately.
However, it seems more likely that the kernel will decouple iowait and
CPU frequency boosting anyway.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* kvm-arm64/writable-midr:
: Writable implementation ID registers, courtesy of Sebastian Ott
:
: Introduce a new capability that allows userspace to set the
: ID registers that identify a CPU implementation: MIDR_EL1, REVIDR_EL1,
: and AIDR_EL1. Also plug a hole in KVM's trap configuration where
: SMIDR_EL1 was readable at EL1, despite the fact that KVM does not
: support SME.
KVM: arm64: Fix documentation for KVM_CAP_ARM_WRITABLE_IMP_ID_REGS
KVM: arm64: Copy MIDR_EL1 into hyp VM when it is writable
KVM: arm64: Copy guest CTR_EL0 into hyp VM
KVM: selftests: arm64: Test writes to MIDR,REVIDR,AIDR
KVM: arm64: Allow userspace to change the implementation ID registers
KVM: arm64: Load VPIDR_EL2 with the VM's MIDR_EL1 value
KVM: arm64: Maintain per-VM copy of implementation ID regs
KVM: arm64: Set HCR_EL2.TID1 unconditionally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When we currently create a pidfd we check that the task hasn't been
reaped right before we create the pidfd. But it is of course possible
that by the time we return the pidfd to userspace the task has already
been reaped since we don't check again after having created a dentry for
it.
This was fine until now because that race was meaningless. But now that
we provide PIDFD_INFO_EXIT it is a problem because it is possible that
the kernel returns a reaped pidfd and it depends on the race whether
PIDFD_INFO_EXIT information is available. This depends on if the task
gets reaped before or after a dentry has been attached to struct pid.
Make this consistent and only returned pidfds for reaped tasks if
PIDFD_INFO_EXIT information is available. This is done by performing
another check whether the task has been reaped right after we attached a
dentry to struct pid.
Since pidfs_exit() is called before struct pid's task linkage is removed
the case where the task got reaped but a dentry was already attached to
struct pid and exit information was recorded and published can be
handled correctly. In that case we do return a pidfd for a reaped task
like we would've before.
Link: https://lore.kernel.org/r/20250316-kabel-fehden-66bdb6a83436@brauner
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- drop batadv_priv_debug_log struct, by Sven Eckelmann
- adopt netdev_hold() / netdev_put(), by Eric Dumazet
- add support for jumbo frames, by Sven Eckelmann
- use consistent name for mesh interface, by Sven Eckelmann
- cleanup B.A.T.M.A.N. IV OGM aggregation handling,
by Sven Eckelmann (4 patches)
- add missing newlines for log macros, by Sven Eckelmann
* tag 'batadv-next-pullrequest-20250313' of git://git.open-mesh.org/linux-merge:
batman-adv: add missing newlines for log macros
batman-adv: Limit aggregation size to outgoing MTU
batman-adv: Use actual packet count for aggregated packets
batman-adv: Switch to bitmap helper for aggregation handling
batman-adv: Limit number of aggregated packets directly
batman-adv: Use consistent name for mesh interface
batman-adv: Add support for jumbo frames
batman-adv: adopt netdev_hold() / netdev_put()
batman-adv: Drop batadv_priv_debug_log struct
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250313164519.72808-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There are a few conflicts between the work that went
into wireless and that's here now, resolve them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With AccECN, there's one additional TCP flag to be used (AE)
and ACE field that overloads the definition of AE, CWR, and
ECE flags. As tcp_flags was previously only 1 byte, the
byte-order stuff needs to be added to it's handling.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit 97c79a38cd45 ("perf core: Per event callchain limit")
introduced a per-event term to allow finer tuning of the depth of
callchains to save space.
It should be applied to the branch stack as well. For example, autoFDO
collections require maximum LBR entries. In the meantime, other
system-wide LBR users may only be interested in the latest a few number
of LBRs. A per-event LBR depth would save the perf output buffer.
The patch simply drops the uninterested branches, but HW still collects
the maximum branches. There may be a model-specific optimization that
can reduce the HW depth for some cases to reduce the overhead further.
But it isn't included in the patch set. Because it's not useful for all
cases. For example, ARCH LBR can utilize the PEBS and XSAVE to collect
LBRs. The depth should have less impact on the collecting overhead.
The model-specific optimization may be implemented later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310181536.3645382-1-kan.liang@linux.intel.com
|
|
Checkpoint/Restore in Userspace (CRIU) requires to reconstruct posix timers
with the same timer ID on restore. It uses sys_timer_create() and relies on
the monotonic increasing timer ID provided by this syscall. It creates and
deletes timers until the desired ID is reached. This is can loop for a long
time, when the checkpointed process had a very sparse timer ID range.
It has been debated to implement a new syscall to allow the creation of
timers with a given timer ID, but that's tideous due to the 32/64bit compat
issues of sigevent_t and of dubious value.
The restore mechanism of CRIU creates the timers in a state where all
threads of the restored process are held on a barrier and cannot issue
syscalls. That means the restorer task has exclusive control.
This allows to address this issue with a prctl() so that the restorer
thread can do:
if (prctl(PR_TIMER_CREATE_RESTORE_IDS, PR_TIMER_CREATE_RESTORE_IDS_ON))
goto linear_mode;
create_timers_with_explicit_ids();
prctl(PR_TIMER_CREATE_RESTORE_IDS, PR_TIMER_CREATE_RESTORE_IDS_OFF);
This is backwards compatible because the prctl() fails on older kernels and
CRIU can fall back to the linear timer ID mechanism. CRIU versions which do
not know about the prctl() just work as before.
Implement the prctl() and modify timer_create() so that it copies the
requested timer ID from userspace by utilizing the existing timer_t
pointer, which is used to copy out the allocated timer ID on success.
If the prctl() is disabled, which it is by default, timer_create() works as
before and does not try to read from the userspace pointer.
There is no problem when a broken or rogue user space application enables
the prctl(). If the user space pointer does not contain a valid ID, then
timer_create() fails. If the data is not initialized, but constains a
random valid ID, timer_create() will create that random timer ID or fail if
the ID is already given out.
As CRIU must use the raw syscall to avoid manipulating the internal state
of the restored process, this has no library dependencies and can be
adopted by CRIU right away.
Recreating two timers with IDs 1000000 and 2000000 takes 1.5 seconds with
the create/delete method. With the prctl() it takes 3 microseconds.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
Link: https://lore.kernel.org/all/87jz8vz0en.ffs@tglx
|
|
Improve the documentation for supported BSS selectors to make it more
precise.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.ba402ff47314.I502b56111b62ea0be174ae76bd03684ae1d4aefb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some regulatory bodies doesn't allow IR (initiate radioation) on a
specific subband, but allows it for channels with a bandwidth of 20 MHz.
Add a channel flag that indicates that, and consider it in
cfg80211_reg_check_beaconing.
While on it, fix the kernel doc of enum nl80211_reg_rule_flags and
change it to use BIT().
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Co-developed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.d3ab352a73ff.I8a8f79e1c9eb74936929463960ee2a324712fe51@changeid
[fix typo]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some extended MLD capabilities and operations bits (currently
the "BTM MLD Recommendataion For Multiple APs Support" bit)
may depend on userspace capabilities. Allow userspace to pass
the values for this field that it supports to the association
and link reconfiguration operations.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20250308225541.bd52078b5f65.I4dd8f53b0030db7ea87a2e0920989e7e2c7b5345@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the remaining SHF_ flags, as listed in the "Executable and
Linkable Format" Wikipedia page and the System V Application Binary
Interface[1]. This allows drivers to load and parse ELF images that use
some of those flags.
In particular, an upcoming change to the Nouveau GPU driver will
use some of the flags.
Link: https://refspecs.linuxfoundation.org/elf/gabi4+/ch4.sheader.html#sh_flags [1]
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250307171417.267488-1-ttabi@nvidia.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
"int" was misspelled as "init" the code comments in the bits.h and
const.h files. Fix the typo.
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Some tools like systemd's jounral need to retrieve the exit and cgroup
information after a process has already been reaped. This can e.g.,
happen when retrieving a pidfd via SCM_PIDFD or SCM_PEERPIDFD.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-6-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The description of @tstamp parameter has one line that starts at the
beginning. This moves such line to the description, which is not the
intent here.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/8238bed1c0375e6b389a8cafe1ad99fdeb1cb1f2.1740387599.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Since commit 05c1280a2bcf ("netdev_features: convert NETIF_F_NETNS_LOCAL to
dev->netns_local"), there is no way to see if the netns_immutable property
s set on a device. Let's add a netlink attribute to advertise it.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The types are used by tools/testing/selftests/vDSO/parse_vdso.c.
To be able to build the vDSO selftests without a libc dependency,
add the types to the kernels own UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/symversion.html#VERDEFEXTS
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-6-28e14e031ed8@linutronix.de
|
|
The type is used by tools/testing/selftests/vDSO/parse_vdso.c.
To be able to build the vDSO selftests without a libc dependency,
add the type to the kernels own UAPI headers. As documented by elf(5).
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-5-28e14e031ed8@linutronix.de
|
|
The definitions are used by tools/testing/selftests/vDSO/parse_vdso.c.
To be able to build the vDSO selftests without a libc dependency,
add the definitions to the kernels own UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://docs.oracle.com/cd/E19683-01/816-1386/chapter6-80869/index.html
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-4-28e14e031ed8@linutronix.de
|
|
The definition is used by tools/testing/selftests/vDSO/parse_vdso.c.
To be able to build the vDSO selftests without a libc dependency,
add the define to the kernels own UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://refspecs.linuxbase.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/libc-ddefs.html
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-3-28e14e031ed8@linutronix.de
|
|
The definition is used by tools/testing/selftests/vDSO/parse_vdso.c.
To be able to build the vDSO selftests without a libc dependency,
add the definition to the kernels own UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://refspecs.linuxfoundation.org/elf/gabi4+/ch4.symtab.html
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-2-28e14e031ed8@linutronix.de
|
|
The in-tree ublk driver doesn't need DMA alignment limit because there
is one data copy between request pages and the userspace buffer.
However, ublk is going to support zero copy, then DMA alignment limit
is required, because same IO buffer is forwarded to backend which may
have specific buffer DMA alignment limit, so the limit has to be exposed
from the frontend driver to client application.
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250227103707.2640014-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implement support for ROI as described in UVC 1.5:
4.2.2.1.20 Digital Region of Interest (ROI) Control
ROI control is implemented using V4L2 control API as
two UVC-specific controls:
V4L2_CID_UVC_REGION_OF_INTEREST_RECT and
V4L2_CID_UVC_REGION_OF_INTEREST_AUTO.
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-16-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix control names: "Of" -> "of", "Controls" -> "Ctrls"]
|
|
Add the capability of retrieving the min and max values of a
compound control.
[Ricardo: Added static to v4l2_ctrl_type_op_(maximum|minimum) proto]
[Ricardo: Fix documentation]
Signed-off-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-2-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix small alignment checkpatch warning]
|
|
Add p_rect to struct v4l2_ext_control with basic support in
v4l2-ctrls.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-1-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
