| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix all kernel-doc warnings in <uapi/linux/isst_if.h>:
- don't use "[]" in the variable name in kernel-doc
- add a few missing entries
- change "power_domain" to "power_domain_id" in kernel-doc to match
the struct member name
- add a leading '@' on a few existing kernel-doc lines
- use '_' instead of '-' in struct member names
Examples (but not all 27 warnings):
Warning: include/uapi/linux/isst_if.h:63 struct member 'cpu_map'
not described in 'isst_if_cpu_maps'
Warning: ../include/uapi/linux/isst_if.h:95 struct member 'req_count'
not described in 'isst_if_io_regs'
Warning: include/uapi/linux/isst_if.h:132 struct member 'mbox_cmd'
not described in 'isst_if_mbox_cmds'
Warning: ../include/uapi/linux/isst_if.h:183 struct member 'supported'
not described in 'isst_core_power'
Warning: ../include/uapi/linux/isst_if.h:206 struct member
'power_domain_id' not described in 'isst_clos_param'
Warning: ../include/uapi/linux/isst_if.h:239 struct member 'assoc_info'
not described in 'isst_if_clos_assoc_cmds'
Warning: ../include/uapi/linux/isst_if.h:286 struct member 'sst_tf_support'
not described in 'isst_perf_level_info'
Warning: ../include/uapi/linux/isst_if.h:375 struct member 'trl_freq_mhz'
not described in 'isst_perf_level_data_info'
Warning: ../include/uapi/linux/isst_if.h:475 struct member 'max_buckets'
not described in 'isst_turbo_freq_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251023194615.180824-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On bpf(BPF_PROG_LOAD) syscall user-supplied BPF programs are
translated by the verifier into "xlated" BPF programs. During this
process the original instructions offsets might be adjusted and/or
individual instructions might be replaced by new sets of instructions,
or deleted.
Add a new BPF map type which is aimed to keep track of how, for a
given program, the original instructions were relocated during the
verification. Also, besides keeping track of the original -> xlated
mapping, make x86 JIT to build the xlated -> jitted mapping for every
instruction listed in an instruction array. This is required for every
future application of instruction arrays: static keys, indirect jumps
and indirect calls.
A map of the BPF_MAP_TYPE_INSN_ARRAY type must be created with a u32
keys and value of size 8. The values have different semantics for
userspace and for BPF space. For userspace a value consists of two
u32 values – xlated and jitted offsets. For BPF side the value is
a real pointer to a jitted instruction.
On map creation/initialization, before loading the program, each
element of the map should be initialized to point to an instruction
offset within the program. Before the program load such maps should
be made frozen. After the program verification xlated and jitted
offsets can be read via the bpf(2) syscall.
If a tracked instruction is removed by the verifier, then the xlated
offset is set to (u32)-1 which is considered to be too big for a valid
BPF program offset.
One such a map can, obviously, be used to track one and only one BPF
program. If the verification process was unsuccessful, then the same
map can be re-used to verify the program with a different log level.
However, if the program was loaded fine, then such a map, being
frozen in any case, can't be reused by other programs even after the
program release.
Example. Consider the following original and xlated programs:
Original prog: Xlated prog:
0: r1 = 0x0 0: r1 = 0
1: *(u32 *)(r10 - 0x4) = r1 1: *(u32 *)(r10 -4) = r1
2: r2 = r10 2: r2 = r10
3: r2 += -0x4 3: r2 += -4
4: r1 = 0x0 ll 4: r1 = map[id:88]
6: call 0x1 6: r1 += 272
7: r0 = *(u32 *)(r2 +0)
8: if r0 >= 0x1 goto pc+3
9: r0 <<= 3
10: r0 += r1
11: goto pc+1
12: r0 = 0
7: r6 = r0 13: r6 = r0
8: if r6 == 0x0 goto +0x2 14: if r6 == 0x0 goto pc+4
9: call 0x76 15: r0 = 0xffffffff8d2079c0
17: r0 = *(u64 *)(r0 +0)
10: *(u64 *)(r6 + 0x0) = r0 18: *(u64 *)(r6 +0) = r0
11: r0 = 0x0 19: r0 = 0x0
12: exit 20: exit
An instruction array map, containing, e.g., instructions [0,4,7,12]
will be translated by the verifier to [0,4,13,20]. A map with
index 5 (the middle of 16-byte instruction) or indexes greater than 12
(outside the program boundaries) would be rejected.
The functionality provided by this patch will be extended in consequent
patches to implement BPF Static Keys, indirect jumps, and indirect calls.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251105090410.1250500-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New Hotkey Support:
- input + dell-wmi-base: Electronic privacy screen on/off hotkey
support
- int3472: Fix unregister double free
- wireless-hotkey: Fix Kconfig typo"
* tag 'platform-drivers-x86-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform: x86: Kconfig: fix minor typo in help for WIRELESS_HOTKEY
platform/x86: dell-wmi-base: Handle electronic privacy screen on/off events
Input: Add keycodes for electronic privacy screen on/off hotkeys
MAINTAINERS: Update int3472 maintainers
platform/x86: int3472: Fix double free of GPIO device during unregister
|
|
Introduce the new BLKREPORTZONESV2 ioctl command to allow user
applications access to the fast zone report implemented by
blkdev_report_zones_cached(). This new ioctl is defined as number 142
and is documented in include/uapi/linux/fs.h.
Unlike the existing BLKREPORTZONES ioctl, this new ioctl uses the flags
field of struct blk_zone_report also as an input. If the user sets the
BLK_ZONE_REP_CACHED flag as an input, then blkdev_report_zones_cached()
is used to generate the zone report using cached zone information. If
this flag is not set, then BLKREPORTZONESV2 behaves in the same manner
as BLKREPORTZONES and the zone report is generated by accessing the
zoned device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The function blk_revalidate_zone_cond() already caches the condition of
all zones of a zoned block device in the zones_cond array of a gendisk.
However, the zone conditions are updated only when the device is scanned
or revalidated.
Implement tracking of the runtime changes to zone conditions using
the new cond field in struct blk_zone_wplug. The size of this structure
remains 112 Bytes as the new field replaces the 4 Bytes padding at the
end of the structure.
Beause zones that do not have a zone write plug can be in the empty,
implicit open, explicit open or full condition, the zones_cond array of
a disk is used to track the conditions, of zones that do not have a zone
write plug. The condition of such zone is updated in the disk zones_cond
array when a zone reset, reset all or finish operation is executed, and
also when a zone write plug is removed from the disk hash table when the
zone becomes full.
Since a device may automatically close an implicitly open zone when
writing to an empty or closed zone, if the total number of open zones
has reached the device limit, the BLK_ZONE_COND_IMP_OPEN and
BLK_ZONE_COND_CLOSED zone conditions cannot be precisely tracked. To
overcome this, the zone condition BLK_ZONE_COND_ACTIVE is introduced to
represent a zone that has the condition BLK_ZONE_COND_IMP_OPEN,
BLK_ZONE_COND_EXP_OPEN or BLK_ZONE_COND_CLOSED. This follows the
definition of an active zone as defined in the NVMe Zoned Namespace
specifications. As such, for a zoned device that has a limit on the
maximum number of open zones, we will never have more zones in the
BLK_ZONE_COND_ACTIVE condition than the device limit. This is compatible
with the SCSI ZBC and ATA ZAC specifications for SMR HDDs as these
devices do not have a limit on the number of active zones.
The function disk_zone_wplug_set_wp_offset() is modified to use the new
helper disk_zone_wplug_update_cond() to update a zone write plug
condition whenever a zone write plug write offset is updated on
submission or merging of write BIOs to a zone.
The functions blk_zone_reset_bio_endio(), blk_zone_reset_all_bio_endio()
and blk_zone_finish_bio_endio() are modified to update the condition of
the zones targeted by reset, reset_all and finish operations, either
using though disk_zone_wplug_set_wp_offset() for zones that have a
zone write plug, or using the disk_zone_set_cond() helper to update the
zones_cond array of the disk for zones that do not have a zone write
plug.
When a zone write plug is removed from the disk hash table (when the
zone becomes empty or full), the condition of struct blk_zone_wplug is
used to update the disk zones_cond array. Conversely, when a zone write
plug is added to the disk hash table, the zones_cond array is used to
initialize the zone write plug condition.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of iterating over all endpoints, under RCU read lock, just to
check if one of them as the fullmesh flag, we can keep a counter of
fullmesh endpoint, similar to what is done with the other flags.
This counter is now checked, before iterating over all endpoints.
Similar to the other counters, this new one is also exposed. A userspace
app can then know when it is being used in a fullmesh mode, with
potentially (too) many subflows.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-1-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Changing alignment of header would mean it's no longer safe to cast a
2 byte aligned pointer between formats. Use two 16 bit fields to make
it 2 byte aligned as previously.
This fixes the performance regression since
commit ("virtio_net: enable gso over UDP tunnel support.") as it uses
virtio_net_hdr_v1_hash_tunnel which embeds
virtio_net_hdr_v1_hash. Pktgen in guest + XDP_DROP on TAP + vhost_net
shows the TX PPS is recovered from 2.4Mpps to 4.45Mpps.
Fixes: 56a06bd40fab ("virtio_net: enable gso over UDP tunnel support.")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251031060551.126-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 0190e4198e47 ("rseq: Deprecate RSEQ_CS_FLAG_NO_RESTART_ON_*
flags") the bits in task::rseq_event_mask are meaningless and just extra
work in terms of setting them individually.
Aside of that the only relevant point where an event has to be raised is
context switch. Neither the CPU nor MM CID can change without going through
a context switch.
Collapse them all into a single boolean which simplifies the code a lot and
remove the pointless invocations which have been sprinkled all over the
place for no value.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084306.336978188@linutronix.de
|
|
PCIe r7.0 Section 7.7.9 Device 3 Extended Capability Structure, defines the
canonical location for determining the Flit Mode of a device. This status
is a dependency for PCIe IDE enabling. Add a new fm_enabled flag to 'struct
pci_dev'.
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Samuel Ortiz <sameo@rivosinc.com>
Cc: Alexey Kardashevskiy <aik@amd.com>
Cc: Xu Yilun <yilun.xu@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251031212902.2256310-6-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The PCIe 7.0 specification, section 11, defines the Trusted Execution
Environment (TEE) Device Interface Security Protocol (TDISP). This
protocol definition builds upon Component Measurement and Authentication
(CMA), and link Integrity and Data Encryption (IDE). It adds support for
assigning devices (PCI physical or virtual function) to a confidential VM
such that the assigned device is enabled to access guest private memory
protected by technologies like Intel TDX, AMD SEV-SNP, RISCV COVE, or ARM
CCA.
The "TSM" (TEE Security Manager) is a concept in the TDISP specification
of an agent that mediates between a "DSM" (Device Security Manager) and
system software in both a VMM and a confidential VM. A VMM uses TSM ABIs
to setup link security and assign devices. A confidential VM uses TSM
ABIs to transition an assigned device into the TDISP "RUN" state and
validate its configuration. From a Linux perspective the TSM abstracts
many of the details of TDISP, IDE, and CMA. Some of those details leak
through at times, but for the most part TDISP is an internal
implementation detail of the TSM.
CONFIG_PCI_TSM adds an "authenticated" attribute and "tsm/" subdirectory
to pci-sysfs. Consider that the TSM driver may itself be a PCI driver.
Userspace can watch for the arrival of a "TSM" device,
/sys/class/tsm/tsm0/uevent KOBJ_CHANGE, to know when the PCI core has
initialized TSM services.
The operations that can be executed against a PCI device are split into
two mutually exclusive operation sets, "Link" and "Security" (struct
pci_tsm_{link,security}_ops). The "Link" operations manage physical link
security properties and communication with the device's Device Security
Manager firmware. These are the host side operations in TDISP. The
"Security" operations coordinate the security state of the assigned
virtual device (TDI). These are the guest side operations in TDISP.
Only "link" (Secure Session and physical Link Encryption) operations are
defined at this stage. There are placeholders for the device security
(Trusted Computing Base entry / exit) operations.
The locking allows for multiple devices to be executing commands
simultaneously, one outstanding command per-device and an rwsem
synchronizes the implementation relative to TSM registration/unregistration
events.
Thanks to Wu Hao for his work on an early draft of this support.
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Samuel Ortiz <sameo@rivosinc.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://patch.msgid.link/20251031212902.2256310-5-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Link encryption is a new PCIe feature enumerated by "PCIe r7.0 section
7.9.26 IDE Extended Capability".
It is both a standalone port + endpoint capability, and a building block
for the security protocol defined by "PCIe r7.0 section 11 TEE Device
Interface Security Protocol (TDISP)". That protocol coordinates device
security setup between a platform TSM (TEE Security Manager) and a
device DSM (Device Security Manager). While the platform TSM can
allocate resources like Stream ID and manage keys, it still requires
system software to manage the IDE capability register block.
Add register definitions and basic enumeration in preparation for
Selective IDE Stream establishment. A follow on change selects the new
CONFIG_PCI_IDE symbol. Note that while the IDE specification defines
both a point-to-point "Link Stream" and a Root Port to endpoint
"Selective Stream", only "Selective Stream" is considered for Linux as
that is the predominant mode expected by Trusted Execution Environment
Security Managers (TSMs), and it is the security model that limits the
number of PCI components within the TCB in a PCIe topology with
switches.
Co-developed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Link: https://patch.msgid.link/20251031212902.2256310-3-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Introduce the userspace entry point for PHY MSE diagnostics via
ethtool netlink. This exposes the core API added previously and
returns both capability information and one or more snapshots.
Userspace sends ETHTOOL_MSG_MSE_GET. The reply carries:
- ETHTOOL_A_MSE_CAPABILITIES: scale limits and timing information
- ETHTOOL_A_MSE_CHANNEL_* nests: one or more snapshots (per-channel
if available, otherwise WORST, otherwise LINK)
Link down returns -ENETDOWN.
Changes:
- YAML: add attribute sets (mse, mse-capabilities, mse-snapshot)
and the mse-get operation
- UAPI (generated): add ETHTOOL_A_MSE_* enums and message IDs,
ETHTOOL_MSG_MSE_GET/REPLY
- ethtool core: add net/ethtool/mse.c implementing the request,
register genl op, and hook into ethnl dispatch
- docs: document MSE_GET in ethtool-netlink.rst
The include/uapi/linux/ethtool_netlink_generated.h is generated
from Documentation/netlink/specs/ethtool.yaml.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251027122801.982364-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new state NAPI_STATE_THREADED_BUSY_POLL to the NAPI state enum to
enable and disable threaded busy polling.
When threaded busy polling is enabled for a NAPI, enable
NAPI_STATE_THREADED also.
When the threaded NAPI is scheduled, set NAPI_STATE_IN_BUSY_POLL to
signal napi_complete_done not to rearm interrupts.
Whenever NAPI_STATE_THREADED_BUSY_POLL is unset, the
NAPI_STATE_IN_BUSY_POLL will be unset, napi_complete_done unsets the
NAPI_STATE_SCHED_THREADED bit also, which in turn will make the kthread
go to sleep.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Martin Karsten <mkarsten@uwaterloo.ca>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Link: https://patch.msgid.link/20251028203007.575686-2-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new listns() system call that allows userspace to iterate through
namespaces in the system. This provides a programmatic interface to
discover and inspect namespaces, enhancing existing namespace apis.
Currently, there is no direct way for userspace to enumerate namespaces
in the system. Applications must resort to scanning /proc/<pid>/ns/
across all processes, which is:
1. Inefficient - requires iterating over all processes
2. Incomplete - misses inactive namespaces that aren't attached to any
running process but are kept alive by file descriptors, bind mounts,
or parent namespace references
3. Permission-heavy - requires access to /proc for many processes
4. No ordering or ownership.
5. No filtering per namespace type: Must always iterate and check all
namespaces.
The list goes on. The listns() system call solves these problems by
providing direct kernel-level enumeration of namespaces. It is similar
to listmount() but obviously tailored to namespaces.
/*
* @req: Pointer to struct ns_id_req specifying search parameters
* @ns_ids: User buffer to receive namespace IDs
* @nr_ns_ids: Size of ns_ids buffer (maximum number of IDs to return)
* @flags: Reserved for future use (must be 0)
*/
ssize_t listns(const struct ns_id_req *req, u64 *ns_ids,
size_t nr_ns_ids, unsigned int flags);
Returns:
- On success: Number of namespace IDs written to ns_ids
- On error: Negative error code
/*
* @size: Structure size
* @ns_id: Starting point for iteration; use 0 for first call, then
* use the last returned ID for subsequent calls to paginate
* @ns_type: Bitmask of namespace types to include (from enum ns_type):
* 0: Return all namespace types
* MNT_NS: Mount namespaces
* NET_NS: Network namespaces
* USER_NS: User namespaces
* etc. Can be OR'd together
* @user_ns_id: Filter results to namespaces owned by this user namespace:
* 0: Return all namespaces (subject to permission checks)
* LISTNS_CURRENT_USER: Namespaces owned by caller's user namespace
* Other value: Namespaces owned by the specified user namespace ID
*/
struct ns_id_req {
__u32 size; /* sizeof(struct ns_id_req) */
__u32 spare; /* Reserved, must be 0 */
__u64 ns_id; /* Last seen namespace ID (for pagination) */
__u32 ns_type; /* Filter by namespace type(s) */
__u32 spare2; /* Reserved, must be 0 */
__u64 user_ns_id; /* Filter by owning user namespace */
};
Example 1: List all namespaces
void list_all_namespaces(void)
{
struct ns_id_req req = {
.size = sizeof(req),
.ns_id = 0, /* Start from beginning */
.ns_type = 0, /* All types */
.user_ns_id = 0, /* All user namespaces */
};
uint64_t ids[100];
ssize_t ret;
printf("All namespaces in the system:\n");
do {
ret = listns(&req, ids, 100, 0);
if (ret < 0) {
perror("listns");
break;
}
for (ssize_t i = 0; i < ret; i++)
printf(" Namespace ID: %llu\n", (unsigned long long)ids[i]);
/* Continue from last seen ID */
if (ret > 0)
req.ns_id = ids[ret - 1];
} while (ret == 100); /* Buffer was full, more may exist */
}
Example 2: List network namespaces only
void list_network_namespaces(void)
{
struct ns_id_req req = {
.size = sizeof(req),
.ns_id = 0,
.ns_type = NET_NS, /* Only network namespaces */
.user_ns_id = 0,
};
uint64_t ids[100];
ssize_t ret;
ret = listns(&req, ids, 100, 0);
if (ret < 0) {
perror("listns");
return;
}
printf("Network namespaces: %zd found\n", ret);
for (ssize_t i = 0; i < ret; i++)
printf(" netns ID: %llu\n", (unsigned long long)ids[i]);
}
Example 3: List namespaces owned by current user namespace
void list_owned_namespaces(void)
{
struct ns_id_req req = {
.size = sizeof(req),
.ns_id = 0,
.ns_type = 0, /* All types */
.user_ns_id = LISTNS_CURRENT_USER, /* Current userns */
};
uint64_t ids[100];
ssize_t ret;
ret = listns(&req, ids, 100, 0);
if (ret < 0) {
perror("listns");
return;
}
printf("Namespaces owned by my user namespace: %zd\n", ret);
for (ssize_t i = 0; i < ret; i++)
printf(" ns ID: %llu\n", (unsigned long long)ids[i]);
}
Example 4: List multiple namespace types
void list_network_and_mount_namespaces(void)
{
struct ns_id_req req = {
.size = sizeof(req),
.ns_id = 0,
.ns_type = NET_NS | MNT_NS, /* Network and mount */
.user_ns_id = 0,
};
uint64_t ids[100];
ssize_t ret;
ret = listns(&req, ids, 100, 0);
printf("Network and mount namespaces: %zd found\n", ret);
}
Example 5: Pagination through large namespace sets
void list_all_with_pagination(void)
{
struct ns_id_req req = {
.size = sizeof(req),
.ns_id = 0,
.ns_type = 0,
.user_ns_id = 0,
};
uint64_t ids[50];
size_t total = 0;
ssize_t ret;
printf("Enumerating all namespaces with pagination:\n");
while (1) {
ret = listns(&req, ids, 50, 0);
if (ret < 0) {
perror("listns");
break;
}
if (ret == 0)
break; /* No more namespaces */
total += ret;
printf(" Batch: %zd namespaces\n", ret);
/* Last ID in this batch becomes start of next batch */
req.ns_id = ids[ret - 1];
if (ret < 50)
break; /* Partial batch = end of results */
}
printf("Total: %zu namespaces\n", total);
}
Permission Model
listns() respects namespace isolation and capabilities:
(1) Global listing (user_ns_id = 0):
- Requires CAP_SYS_ADMIN in the namespace's owning user namespace
- OR the namespace must be in the caller's namespace context (e.g.,
a namespace the caller is currently using)
- User namespaces additionally allow listing if the caller has
CAP_SYS_ADMIN in that user namespace itself
(2) Owner-filtered listing (user_ns_id != 0):
- Requires CAP_SYS_ADMIN in the specified owner user namespace
- OR the namespace must be in the caller's namespace context
- This allows unprivileged processes to enumerate namespaces they own
(3) Visibility:
- Only "active" namespaces are listed
- A namespace is active if it has a non-zero __ns_ref_active count
- This includes namespaces used by running processes, held by open
file descriptors, or kept active by bind mounts
- Inactive namespaces (kept alive only by internal kernel
references) are not visible via listns()
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-19-2e6f823ebdc0@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The initial set of namespace comes with fixed inode numbers making it
easy for userspace to identify them solely based on that information.
This has long preceeded anything here.
Similarly, let's assign fixed namespace ids for the initial namespaces.
Kill the cookie and use a sequentially increasing number. This has the
nice side-effect that the owning user namespace will always have a
namespace id that is smaller than any of it's descendant namespaces.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-15-2e6f823ebdc0@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There is a better way to handle the problem IORING_REGISTER_ZCRX_REFILL
solves. The uapi can also be slightly adjusted to accommodate future
extensions. Remove the feature for now, it'll be reworked for the next
release.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, REQ_OP_WRITE_ZEROES operations are not handled in the
blktrace infrastructure, resulting in incorrect or missing operation
labels in ftrace blktrace output. This manifests as write-zeroes
operations appearing with incorrect labels like "N" instead of a
proper "WZ" designation.
This patch adds complete support for REQ_OP_WRITE_ZEROES across the
blktrace infrastructure:
Add BLK_TC_WRITE_ZEROES trace category in blktrace_api.h and update
BLK_TC_END_V2 marker accordingly
Map REQ_OP_WRITE_ZEROES to BLK_TC_WRITE_ZEROES in __blk_add_trace()
to ensure proper trace event categorization
Update fill_rwbs() to generate "WZ" label for write-zeroes operations
in ftrace output, making them easily identifiable
Add "write-zeroes" string mapping in act_to_str array for debugfs
filter interface
Update blk_fill_rwbs() to handle REQ_OP_WRITE_ZEROES for block layer
event tracing
With this fix, write-zeroes operations are now correctly traced and
displayed.
===========================================================
BEFORE THIS PATCH
===========================================================
blkdiscard -z -o 0 -l 40960 /dev/nvme0n1
blkdiscard-3809 [030] ..... 1212.253701: block_bio_queue: 259,0 NS 0 + 80 [blkdiscard]
blkdiscard-3809 [030] ..... 1212.253703: block_getrq: 259,0 NS 0 + 80 [blkdiscard]
blkdiscard-3809 [030] ..... 1212.253704: block_io_start: 259,0 NS 40960 () 0 + 80 be,0,4 [blkdiscard]
blkdiscard-3809 [030] ..... 1212.253704: block_plug: [blkdiscard]
blkdiscard-3809 [030] ..... 1212.253706: block_unplug: [blkdiscard] 1
blkdiscard-3809 [030] ..... 1212.253706: block_rq_insert: 259,0 NS 40960 () 0 + 80 be,0,4 [blkdiscard]
kworker/30:1H-566 [030] ..... 1212.253726: block_rq_issue: 259,0 NS 40960 () 0 + 80 be,0,4 [kworker/30:1H]
<idle>-0 [030] d.h1. 1212.253957: block_rq_complete: 259,0 NS () 0 + 80 be,0,4 [0]
<idle>-0 [030] dNh1. 1212.253960: block_io_done: 259,0 NS 0 () 0 + 0 none,0,0 [swapper/30]
Trace Event Breakdown:
Event | Device | Op | Sector | Sectors | Byte Size | Calculation
block_bio_queue | 259,0 | NS | 0 | 80 | - | 80 × 512 = 40,960
block_getrq | 259,0 | NS | 0 | 80 | - | 80 × 512 = 40,960
block_io_start | 259,0 | NS | 0 | 80 | 40960 | Direct from trace
block_rq_insert | 259,0 | NS | 0 | 80 | 40960 | Direct from trace
block_rq_issue | 259,0 | NS | 0 | 80 | 40960 | Direct from trace
block_rq_complete | 259,0 | NS | 0 | 80 | - | 80 × 512 = 40,960
block_io_done | 259,0 | NS | 0 | 0 | 0 | Completion (no data)
Total Bytes Transferred: Sectors: 80 Bytes: 80 × 512 = 40,960 bytes
===========================================================
AFTER THIS PATCH
===========================================================
blkdiscard -z -o 0 -l 40960 /dev/nvme0n1
blkdiscard-2477 [020] ..... 960.989131: block_bio_queue: 259,0 WZS 0 + 80 [blkdiscard]
blkdiscard-2477 [020] ..... 960.989134: block_getrq: 259,0 WZS 0 + 80 [blkdiscard]
blkdiscard-2477 [020] ..... 960.989135: block_io_start: 259,0 WZS 40960 () 0 + 80 be,0,4 [blkdiscard]
blkdiscard-2477 [020] ..... 960.989138: block_plug: [blkdiscard]
blkdiscard-2477 [020] ..... 960.989140: block_unplug: [blkdiscard] 1
blkdiscard-2477 [020] ..... 960.989141: block_rq_insert: 259,0 WZS 40960 () 0 + 80 be,0,4 [blkdiscard]
kworker/20:1H-736 [020] ..... 960.989166: block_rq_issue: 259,0 WZS 40960 () 0 + 80 be,0,4 [kworker/20:1H]
<idle>-0 [020] d.h1. 960.989476: block_rq_complete: 259,0 WZS () 0 + 80 be,0,4 [0]
<idle>-0 [020] dNh1. 960.989482: block_io_done: 259,0 WZS 0 () 0 + 0 none,0,0 [swapper/20]
Trace Event Breakdown:
Event | Device | Op | Sector | Sectors | Byte Size | Calculation
block_bio_queue | 259,0 | WZS | 0 | 80 | - | 80 × 512 = 40,960
block_getrq | 259,0 | WZS | 0 | 80 | - | 80 × 512 = 40,960
block_io_start | 259,0 | WZS | 0 | 80 | 40960 | Direct from trace
block_rq_insert | 259,0 | WZS | 0 | 80 | 40960 | Direct from trace
block_rq_issue | 259,0 | WZS | 0 | 80 | 40960 | Direct from trace
block_rq_complete | 259,0 | WZS | 0 | 80 | - | 80 × 512 = 40,960
block_io_done | 259,0 | WZS | 0 | 0 | 0 | Completion (no data)
Total Bytes Transferred: Sectors: 80 Bytes: 80 × 512 = 40,960 bytes
Tested with ftrace blktrace on NVMe devices using blkdiscard with
the -z (write-zeroes) flag.
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Phase-adjust values are currently limited by a min-max range. Some
hardware requires, for certain pin types, that values be multiples of
a specific granularity, as in the zl3073x driver.
Add a `phase-adjust-gran` pin attribute and an appropriate field in
dpll_pin_properties. If set by the driver, use its value to validate
user-provided phase-adjust values.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20251029153207.178448-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Userspace needs access to the signal that caused the coredump before the
coredumping process has been reaped. Expose it as part of the coredump
information in struct pidfd_info. After the process has been reaped that
info is also available as part of PIDFD_INFO_EXIT's exit_code field.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-8-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some of the future fields in struct pidfd_info can be optional. If the
kernel has nothing to emit in that field, then it doesn't set the flag
in the reply. This presents a problem: There is currently no way to know
what mask flags the kernel supports since one can't always count on them
being in the reply.
Add a new PIDFD_INFO_SUPPORTED_MASK flag and field that the kernel can
set in the reply. Userspace can use this to determine if the fields it
requires from the kernel are supported. This also gives us a way to
deprecate fields in the future, if that should become necessary.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-5-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We grew struct pidfd_info not too long ago.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-3-ca449b7b7aa0@kernel.org
Fixes: 1d8db6fd698d ("pidfs, coredump: add PIDFD_INFO_COREDUMP")
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add support for deferred userspace unwind to perf.
Where perf currently relies on in-place stack unwinding; from NMI
context and all that. This moves the userspace part of the unwind to
right before the return-to-userspace.
This has two distinct benefits, the biggest is that it moves the
unwind to a faultable context. It becomes possible to fault in debug
info (.eh_frame, SFrame etc.) that might not otherwise be readily
available. And secondly, it de-duplicates the user callchain where
multiple samples happen during the same kernel entry.
To facilitate this the perf interface is extended with a new record
type:
PERF_RECORD_CALLCHAIN_DEFERRED
and two new attribute flags:
perf_event_attr::defer_callchain - to request the user unwind be deferred
perf_event_attr::defer_output - to request PERF_RECORD_CALLCHAIN_DEFERRED records
The existing PERF_RECORD_SAMPLE callchain section gets a new
context type:
PERF_CONTEXT_USER_DEFERRED
After which will come a single entry, denoting the 'cookie' of the
deferred callchain that should be attached here, matching the 'cookie'
field of the above mentioned PERF_RECORD_CALLCHAIN_DEFERRED.
The 'defer_callchain' flag is expected on all events with
PERF_SAMPLE_CALLCHAIN. The 'defer_output' flag is expect on the event
responsible for collecting side-band events (like mmap, comm etc.).
Setting 'defer_output' on multiple events will get you duplicated
PERF_RECORD_CALLCHAIN_DEFERRED records.
Based on earlier patches by Josh and Steven.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251023150002.GR4067720@noisy.programming.kicks-ass.net
|
|
dma_map_benchmark is a standalone developer tool rather than an
automated selftest. It has no pass/fail criteria, expects manual
invocation, and is built as a normal userspace binary. Move it to
tools/dma/ and add a minimal Makefile.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Suggested-by: Barry Song <baohua@kernel.org>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251028120900.2265511-3-xiaqinxin@huawei.com
|
|
Fix typo: "verical" -> "vertical" in macro description
Signed-off-by: PIYUSH CHOUDHARY <mercmerc961@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
|
|
Add keycodes for hotkeys toggling the electronic privacy screen found on
some laptops on/off.
There already is an API for eprivacy screens as kernel-mode-setting drm
connector object properties:
https://www.kernel.org/doc/html/latest/gpu/drm-kms.html#standard-connector-properties
this API also supports reporting when the eprivacy screen is turned on/off
by the embedded-controller (EC) in response to hotkey presses.
But on some laptops (e.g. the Dell Latitude 7300) the firmware does not
allow querying the presence nor the status of the eprivacy screen at boot.
This makes it impossible to implement the drm connector properties API
since drm objects do not allow adding new properties after creation and
the presence of the eprivacy cannot be detected at boot.
The first notice of the presence of an eprivacy screen on these laptops is
an EC generated (WMI) event when the eprivacy screen hotkeys are pressed.
In this case the new keycodes this change adds can be generated to notify
userspace of the eprivacy screen on/off hotkeys being pressed, so that
userspace can show the usual on-screen-display (OSD) notification for eprivacy
screen on/off to the user. This is similar to how e.g. touchpad on/off
keycodes are used to show the touchpad on/off OSD.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20251020152331.52870-2-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When the BPF ring buffer is full, a new event cannot be recorded until one
or more old events are consumed to make enough space for it. In cases such
as fault diagnostics, where recent events are more useful than older ones,
this mechanism may lead to critical events being lost.
So add overwrite mode for BPF ring buffer to address it. In this mode, the
new event overwrites the oldest event when the buffer is full.
The basic idea is as follows:
1. producer_pos tracks the next position to record new event. When there
is enough free space, producer_pos is simply advanced by producer to
make space for the new event.
2. To avoid waiting for consumer when the buffer is full, a new variable,
overwrite_pos, is introduced for producer. It points to the oldest event
committed in the buffer. It is advanced by producer to discard one or more
oldest events to make space for the new event when the buffer is full.
3. pending_pos tracks the oldest event to be committed. pending_pos is never
passed by producer_pos, so multiple producers never write to the same
position at the same time.
The following example diagrams show how it works in a 4096-byte ring buffer.
1. At first, {producer,overwrite,pending,consumer}_pos are all set to 0.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| |
| |
| |
+-----------------------------------------------------------------------+
^
|
|
producer_pos = 0
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
2. Now reserve a 512-byte event A.
There is enough free space, so A is allocated at offset 0. And producer_pos
is advanced to 512, the end of A. Since A is not submitted, the BUSY bit is
set.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | |
| A | |
| [BUSY] | |
+-----------------------------------------------------------------------+
^ ^
| |
| |
| producer_pos = 512
|
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
3. Reserve event B, size 1024.
B is allocated at offset 512 with BUSY bit set, and producer_pos is advanced
to the end of B.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | |
| A | B | |
| [BUSY] | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^
| |
| |
| producer_pos = 1536
|
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
4. Reserve event C, size 2048.
C is allocated at offset 1536, and producer_pos is advanced to 3584.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| A | B | C | |
| [BUSY] | [BUSY] | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^
| |
| |
| producer_pos = 3584
|
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
5. Submit event A.
The BUSY bit of A is cleared. B becomes the oldest event to be committed, so
pending_pos is advanced to 512, the start of B.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| A | B | C | |
| | [BUSY] | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | |
| pending_pos = 512 producer_pos = 3584
|
overwrite_pos = 0
consumer_pos = 0
6. Submit event B.
The BUSY bit of B is cleared, and pending_pos is advanced to the start of C,
which is now the oldest event to be committed.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| A | B | C | |
| | | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | |
| pending_pos = 1536 producer_pos = 3584
|
overwrite_pos = 0
consumer_pos = 0
7. Reserve event D, size 1536 (3 * 512).
There are 2048 bytes not being written between producer_pos (currently 3584)
and pending_pos, so D is allocated at offset 3584, and producer_pos is advanced
by 1536 (from 3584 to 5120).
Since event D will overwrite all bytes of event A and the first 512 bytes of
event B, overwrite_pos is advanced to the start of event C, the oldest event
that is not overwritten.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| D End | | C | D Begin|
| [BUSY] | | [BUSY] | [BUSY] |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | pending_pos = 1536
| | overwrite_pos = 1536
| |
| producer_pos=5120
|
consumer_pos = 0
8. Reserve event E, size 1024.
Although there are 512 bytes not being written between producer_pos and
pending_pos, E cannot be reserved, as it would overwrite the first 512
bytes of event C, which is still being written.
9. Submit event C and D.
pending_pos is advanced to the end of D.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| D End | | C | D Begin|
| | | | |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | overwrite_pos = 1536
| |
| producer_pos=5120
| pending_pos=5120
|
consumer_pos = 0
The performance data for overwrite mode will be provided in a follow-up
patch that adds overwrite-mode benchmarks.
A sample of performance data for non-overwrite mode, collected on an x86_64
CPU and an arm64 CPU, before and after this patch, is shown below. As we can
see, no obvious performance regression occurs.
- x86_64 (AMD EPYC 9654)
Before:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.623 ± 0.027M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 15.812 ± 0.014M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 7.871 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 6.703 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 2.896 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 2.054 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 1.864 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 1.580 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 1.484 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 1.369 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 1.316 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 1.272 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 1.239 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 1.226 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 1.213 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 1.193 ± 0.001M/s (drops 0.000 ± 0.000M/s)
After:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.845 ± 0.036M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 15.889 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 8.155 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 6.708 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 2.918 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 2.065 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 1.870 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 1.582 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 1.482 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 1.372 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 1.323 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 1.264 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 1.236 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 1.209 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 1.189 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 1.165 ± 0.002M/s (drops 0.000 ± 0.000M/s)
- arm64 (HiSilicon Kunpeng 920)
Before:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.310 ± 0.623M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 9.947 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 6.634 ± 0.011M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 4.502 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 3.888 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 3.372 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 3.189 ± 0.010M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 2.998 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 3.086 ± 0.018M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 2.845 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 2.815 ± 0.008M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 2.771 ± 0.009M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 2.814 ± 0.011M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 2.752 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 2.695 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 2.710 ± 0.006M/s (drops 0.000 ± 0.000M/s)
After:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.283 ± 0.550M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 9.993 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 6.898 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 5.257 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 3.830 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 3.528 ± 0.013M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 3.265 ± 0.018M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 2.990 ± 0.007M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 2.929 ± 0.014M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 2.898 ± 0.010M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 2.818 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 2.789 ± 0.012M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 2.770 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 2.651 ± 0.007M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 2.669 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 2.695 ± 0.009M/s (drops 0.000 ± 0.000M/s)
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251018035738.4039621-2-xukuohai@huaweicloud.com
|
|
During a handshake, an endpoint may specify a maximum record size limit.
Currently, the kernel defaults to TLS_MAX_PAYLOAD_SIZE (16KB) for the
maximum record size. Meaning that, the outgoing records from the kernel
can exceed a lower size negotiated during the handshake. In such a case,
the TLS endpoint must send a fatal "record_overflow" alert [1], and
thus the record is discarded.
Upcoming Western Digital NVMe-TCP hardware controllers implement TLS
support. For these devices, supporting TLS record size negotiation is
necessary because the maximum TLS record size supported by the controller
is less than the default 16KB currently used by the kernel.
Currently, there is no way to inform the kernel of such a limit. This patch
adds support to a new setsockopt() option `TLS_TX_MAX_PAYLOAD_LEN` that
allows for setting the maximum plaintext fragment size. Once set, outgoing
records are no larger than the size specified. This option can be used to
specify the record size limit.
[1] https://www.rfc-editor.org/rfc/rfc8449
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251022001937.20155-1-wilfred.opensource@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dynptr currently caps size and offset at 24 bits, which isn’t sufficient
for file-backed use cases; even 32 bits can be limiting. Refactor dynptr
helpers/kfuncs to use 64-bit size and offset, ensuring consistency
across the APIs.
This change does not affect internals of xdp, skb or other dynptrs,
which continue to behave as before. Also it does not break binary
compatibility.
The widening enables large-file access support via dynptr, implemented
in the next patches.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a generic netlink spec in YAML format and autogenerate boilerplate
code using ynl-regen.sh to introduce a generic netlink for the energy
model. It allows a userspace program to read the performance domain and
its energy model. It notifies the userspace program when a performance
domain is created or deleted or its energy model is updated through a
multicast interface.
Specifically, it supports two commands:
- EM_CMD_GET_PDS: Get the list of information for all performance
domains.
- EM_CMD_GET_PD_TABLE: Get the energy model table of a performance
domain.
Also, it supports three notification events:
- EM_CMD_PD_CREATED: When a performance domain is created.
- EM_CMD_PD_DELETED: When a performance domain is deleted.
- EM_CMD_PD_UPDATED: When the energy model table of a performance domain
is updated.
Finally, update MAINTAINERS to include new files.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-4-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Trace zone write plugging operations on block devices.
As tracing of zoned block commands needs the upper 32bit of the widened
64bit action, only add traces to blktrace if user-space has requested
version 2 of the blktrace protocol.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Expose ZONE APPEND completions as a block trace completion action to
blktrace.
As tracing of zoned block commands needs the upper 32bit of the widened
64bit action, only add traces to blktrace if user-space has requested
version 2 of the blktrace protocol.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add block trace commands for zone operations. These commands can only be
handled with version 2 of the blktrace protocol. For version 1, warn if a
command that does not fit into the 16 bits reserved for the command in
this version is passed in.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add definitions for the extended version of the blktrace protocol using a
wider action type to be able to record new actions in the kernel.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add definitions for a version 2 of the blk_user_trace_setup ioctl. This
new ioctl will enable a different struct layout of the binary data passed
to user-space when using a new version of the blktrace utility requesting
the new struct layout.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Normal rings support 64b SQEs for posting submissions, while certain
features require the ring to be configured with IORING_SETUP_SQE128, as
they need to convey more information per submission. This, in turn,
makes ALL the SQEs be 128b in size. This is somewhat wasteful and
inefficient, particularly when only certain SQEs need to be of the
bigger variant.
This adds support for setting up a ring with mixed SQE sizes, using
IORING_SETUP_SQE_MIXED. When setup in this mode, SQEs posted to the ring
may be either 64b or 128b in size. If a SQE is 128b in size, then opcode
will be set to a variante to indicate that this is the case. Any other
non-128b opcode will assume the SQ's default size.
SQEs on these types of mixed rings may also utilize NOP with skip
success set. This can happen if the ring is one (small) SQE entry away
from wrapping, and an attempt is made to get a 128b SQE. As SQEs must be
contiguous in the SQ ring, a 128b SQE cannot wrap the ring. For this
case, a single NOP SQE should be inserted with the SKIP_SUCCESS flag
set. The kernel will process this as a normal NOP and without posting a
CQE.
Signed-off-by: Keith Busch <kbusch@kernel.org>
[axboe: {} style fix and assign sqe before opcode read]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for Motorcomm YT921x tags, which includes a proper
configurable ethertype field (default to 0x9988).
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251017060859.326450-3-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
guest_memfd's inode represents memory the guest_memfd is
providing. guest_memfd's file represents a struct kvm's view of that
memory.
Using a custom inode allows customization of the inode teardown
process via callbacks. For example, ->evict_inode() allows
customization of the truncation process on file close, and
->destroy_inode() and ->free_inode() allow customization of the inode
freeing process.
Customizing the truncation process allows flexibility in management of
guest_memfd memory and customization of the inode freeing process
allows proper cleanup of memory metadata stored on the inode.
Memory metadata is more appropriately stored on the inode (as opposed
to the file), since the metadata is for the memory and is not unique
to a specific binding and struct kvm.
Acked-by: David Hildenbrand <david@redhat.com>
Co-developed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Tested-by: Ashish Kalra <ashish.kalra@amd.com>
[sean: drop helpers, open code logic in __kvm_gmem_create()]
Link: https://lore.kernel.org/r/20251016172853.52451-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
|
|
If a socket has sk->sk_bypass_prot_mem flagged, the socket opts out
of the global protocol memory accounting.
This is easily controlled by net.core.bypass_prot_mem sysctl, but it
lacks flexibility.
Let's support flagging (and clearing) sk->sk_bypass_prot_mem via
bpf_setsockopt() at the BPF_CGROUP_INET_SOCK_CREATE hook.
int val = 1;
bpf_setsockopt(ctx, SOL_SOCKET, SK_BPF_BYPASS_PROT_MEM,
&val, sizeof(val));
As with net.core.bypass_prot_mem, this is inherited to child sockets,
and BPF always takes precedence over sysctl at socket(2) and accept(2).
SK_BPF_BYPASS_PROT_MEM is only supported at BPF_CGROUP_INET_SOCK_CREATE
and not supported on other hooks for some reasons:
1. UDP charges memory under sk->sk_receive_queue.lock instead
of lock_sock()
2. Modifying the flag after skb is charged to sk requires such
adjustment during bpf_setsockopt() and complicates the logic
unnecessarily
We can support other hooks later if a real use case justifies that.
Most changes are inline and hard to trace, but a microbenchmark on
__sk_mem_raise_allocated() during neper/tcp_stream showed that more
samples completed faster with sk->sk_bypass_prot_mem == 1. This will
be more visible under tcp_mem pressure (but it's not a fair comparison).
# bpftrace -e 'kprobe:__sk_mem_raise_allocated { @start[tid] = nsecs; }
kretprobe:__sk_mem_raise_allocated /@start[tid]/
{ @end[tid] = nsecs - @start[tid]; @times = hist(@end[tid]); delete(@start[tid]); }'
# tcp_stream -6 -F 1000 -N -T 256
Without bpf prog:
[128, 256) 3846 | |
[256, 512) 1505326 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 1371006 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[1K, 2K) 198207 |@@@@@@ |
[2K, 4K) 31199 |@ |
With bpf prog in the next patch:
(must be attached before tcp_stream)
# bpftool prog load sk_bypass_prot_mem.bpf.o /sys/fs/bpf/test type cgroup/sock_create
# bpftool cgroup attach /sys/fs/cgroup/test cgroup_inet_sock_create pinned /sys/fs/bpf/test
[128, 256) 6413 | |
[256, 512) 1868425 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 1101697 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[1K, 2K) 117031 |@@@@ |
[2K, 4K) 11773 | |
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-6-kuniyu@google.com
|
|
Pull bpf fixes from Alexei Starovoitov:
- Finish constification of 1st parameter of bpf_d_path() (Rong Tao)
- Harden userspace-supplied xdp_desc validation (Alexander Lobakin)
- Fix metadata_dst leak in __bpf_redirect_neigh_v{4,6}() (Daniel
Borkmann)
- Fix undefined behavior in {get,put}_unaligned_be32() (Eric Biggers)
- Use correct context to unpin bpf hash map with special types (KaFai
Wan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add test for unpinning htab with internal timer struct
bpf: Avoid RCU context warning when unpinning htab with internal structs
xsk: Harden userspace-supplied xdp_desc validation
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
libbpf: Fix undefined behavior in {get,put}_unaligned_be32()
bpf: Finish constification of 1st parameter of bpf_d_path()
|
|
Add a guest_memfd flag to allow userspace to state that the underlying
memory should be configured to be initialized as shared, and reject user
page faults if the guest_memfd instance's memory isn't shared. Because
KVM doesn't yet support in-place private<=>shared conversions, all
guest_memfd memory effectively follows the initial state.
Alternatively, KVM could deduce the initial state based on MMAP, which for
all intents and purposes is what KVM currently does. However, implicitly
deriving the default state based on MMAP will result in a messy ABI when
support for in-place conversions is added.
For x86 CoCo VMs, which don't yet support MMAP, memory is currently private
by default (otherwise the memory would be unusable). If MMAP implies
memory is shared by default, then the default state for CoCo VMs will vary
based on MMAP, and from userspace's perspective, will change when in-place
conversion support is added. I.e. to maintain guest<=>host ABI, userspace
would need to immediately convert all memory from shared=>private, which
is both ugly and inefficient. The inefficiency could be avoided by adding
a flag to state that memory is _private_ by default, irrespective of MMAP,
but that would lead to an equally messy and hard to document ABI.
Bite the bullet and immediately add a flag to control the default state so
that the effective behavior is explicit and straightforward.
Fixes: 3d3a04fad25a ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework the not-yet-released KVM_CAP_GUEST_MEMFD_MMAP into a more generic
KVM_CAP_GUEST_MEMFD_FLAGS capability so that adding new flags doesn't
require a new capability, and so that developers aren't tempted to bundle
multiple flags into a single capability.
Note, kvm_vm_ioctl_check_extension_generic() can only return a 32-bit
value, but that limitation can be easily circumvented by adding e.g.
KVM_CAP_GUEST_MEMFD_FLAGS2 in the unlikely event guest_memfd supports more
than 32 flags.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull more drm fixes from Dave Airlie:
"Just the follow up fixes for rc1 from the next branch, amdgpu and xe
mostly with a single v3d fix in there.
amdgpu:
- DC DCE6 fixes
- GPU reset fixes
- Secure diplay messaging cleanup
- MES fix
- GPUVM locking fixes
- PMFW messaging cleanup
- PCI US/DS switch handling fix
- VCN queue reset fix
- DC FPU handling fix
- DCN 3.5 fix
- DC mirroring fix
amdkfd:
- Fix kfd process ref leak
- mmap write lock handling fix
- Fix comments in IOCTL
xe:
- Fix build with clang 16
- Fix handling of invalid configfs syntax usage and spell out the
expected syntax in the documentation
- Do not try late bind firmware when running as VF since it shouldn't
handle firmware loading
- Fix idle assertion for local BOs
- Fix uninitialized variable for late binding
- Do not require perfmon_capable to expose free memory at page
granularity. Handle it like other drm drivers do
- Fix lock handling on suspend error path
- Fix I2C controller resume after S3
v3d:
- fix fence locking"
* tag 'drm-next-2025-10-11-1' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/amd/display: Incorrect Mirror Cositing
drm/amd/display: Enable Dynamic DTBCLK Switch
drm/amdgpu: Report individual reset error
drm/amdgpu: partially revert "revert to old status lock handling v3"
drm/amd/display: Fix unsafe uses of kernel mode FPU
drm/amd/pm: Disable VCN queue reset on SMU v13.0.6 due to regression
drm/amdgpu: Fix general protection fault in amdgpu_vm_bo_reset_state_machine
drm/amdgpu: Check swus/ds for switch state save
drm/amdkfd: Fix two comments in kfd_ioctl.h
drm/amd/pm: Avoid interface mismatch messaging
drm/amdgpu: Merge amdgpu_vm_set_pasid into amdgpu_vm_init
drm/amd/amdgpu: Fix the mes version that support inv_tlbs
drm/amd: Check whether secure display TA loaded successfully
drm/amdkfd: Fix mmap write lock not release
drm/amdkfd: Fix kfd process ref leaking when userptr unmapping
drm/amdgpu: Fix for GPU reset being blocked by KIQ I/O.
drm/amd/display: Disable scaling on DCE6 for now
drm/amd/display: Properly disable scaling on DCE6
drm/amd/display: Properly clear SCL_*_FILTER_CONTROL on DCE6
drm/amd/display: Add missing DCE6 SCL_HORZ_FILTER_INIT* SRIs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fixup indentation in the UAPI header
- Two fixes for zcrx. One fixes receiving too much in some cases, and
the other deals with not correctly incrementing the source in the
fallback copy loop
- Fix for a race in the IORING_OP_WAITID command, where there was a
small window where the request would be left on the wait_queue_head
list even though it was being canceled/completed
- Update liburing git URL in the kernel tree
* tag 'io_uring-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: increment fallback loop src offset
io_uring/zcrx: fix overshooting recv limit
io_uring: use tab indentation for IORING_SEND_VECTORIZED comment
io_uring/waitid: always prune wait queue entry in io_waitid_wait()
io_uring: update liburing git URL
|
|
Queue read and write pointers are "to KFD", not "from KFD".
Suggested-by: Robert Liu <robert.liu@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Robert Liu <robert.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Be consistent with tab style of "liburing/src/include/liburing/io_uring.h".
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
