| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This config option makes only couple of lines optional.
Two small helpers and an int in couple of cls structs.
Remove the config option and always compile this in.
This saves the user from unexpected surprises when he adds
a filter with ingress device match which is silently ignored
in case the config option is not set.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Many changes all over:
* HE (802.11ax) work continues
* WPA3 offloads
* work on extended key ID handling continues
* fixes to honour AP supported rates with auth/assoc frames
* nl80211 netlink policy improvements to fix some issues
with strict validation on new commands with old attrs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow the userland daemon to en/disable TWT support for an AP.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
[simplify parsing code]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Let drivers advertise support for station-mode SAE authentication
offload with a new NL80211_EXT_FEATURE_SAE_OFFLOAD flag.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add definition of WPA version 3 for SAE authentication.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Adding delays to TCP flows is crucial for studying behavior
of TCP stacks, including congestion control modules.
Linux offers netem module, but it has unpractical constraints :
- Need root access to change qdisc
- Hard to setup on egress if combined with non trivial qdisc like FQ
- Single delay for all flows.
EDT (Earliest Departure Time) adoption in TCP stack allows us
to enable a per socket delay at a very small cost.
Networking tools can now establish thousands of flows, each of them
with a different delay, simulating real world conditions.
This requires FQ packet scheduler or a EDT-enabled NIC.
This patchs adds TCP_TX_DELAY socket option, to set a delay in
usec units.
unsigned int tx_delay = 10000; /* 10 msec */
setsockopt(fd, SOL_TCP, TCP_TX_DELAY, &tx_delay, sizeof(tx_delay));
Note that FQ packet scheduler limits might need some tweaking :
man tc-fq
PARAMETERS
limit
Hard limit on the real queue size. When this limit is
reached, new packets are dropped. If the value is lowered,
packets are dropped so that the new limit is met. Default
is 10000 packets.
flow_limit
Hard limit on the maximum number of packets queued per
flow. Default value is 100.
Use of TCP_TX_DELAY option will increase number of skbs in FQ qdisc,
so packets would be dropped if any of the previous limit is hit.
Use of a jump label makes this support runtime-free, for hosts
never using the option.
Also note that TSQ (TCP Small Queues) limits are slightly changed
with this patch : we need to account that skbs artificially delayed
wont stop us providind more skbs to feed the pipe (netem uses
skb_orphan_partial() for this purpose, but FQ can not use this trick)
Because of that, using big delays might very well trigger
old bugs in TSO auto defer logic and/or sndbuf limited detection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some ISDN files that got removed in net-next had some changes
done in mainline, take the removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add 1000BaseX to the link modes which are detected based on the
MII_ESTATUS register as per 802.3 Clause 22. This allows PHYs which
support 1000BaseX to work properly with drivers using phylink.
Previously 1000BaseX support was not detected, and if that was the only
mode the PHY indicated support for, phylink would refuse to attach it
due to the list of supported modes being empty.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"This fixes a leaked inode lock in an error cleanup path and a data
consistency issue with copy_file_range().
It also adds a new flag for the WRITE request that allows userspace
filesystems to clear suid/sgid bits on the file if necessary"
* tag 'fuse-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: extract helper for range writeback
fuse: fix copy_file_range() in the writeback case
fuse: add FUSE_WRITE_KILL_PRIV
fuse: fallocate: fix return with locked inode
|
|
The variable cache_allocs is to indicate how many frags (KiB) are in one
rds connection frag cache.
The command "rds-info -Iv" will output the rds connection cache
statistics as below:
"
RDS IB Connections:
LocalAddr RemoteAddr Tos SL LocalDev RemoteDev
1.1.1.14 1.1.1.14 58 255 fe80::2:c903:a:7a31 fe80::2:c903:a:7a31
send_wr=256, recv_wr=1024, send_sge=8, rdma_mr_max=4096,
rdma_mr_size=257, cache_allocs=12
"
This means that there are about 12KiB frag in this rds connection frag
cache.
Since rds.h in rds-tools is not related with the kernel rds.h, the change
in kernel rds.h does not affect rds-tools.
rds-info in rds-tools 2.0.5 and 2.0.6 is tested with this commit. It works
well.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new define ETH_P_LLDP for Link Layer Discovery Protocol (LLDP)
ethertype.
Suggested-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Introduce a function to be called from drivers during flash. It sends
notification to userspace about flash update progress.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Arnd Bergmann says:
====================
isdn: deprecate non-mISDN drivers
When isdn4linux came up in the context of another patch series, I
remembered that we had discussed removing it a while ago.
It turns out that the suggestion from Karsten Keil wa to remove I4L
in 2018 after the last public ISDN networks are shut down. This has
happened now (with a very small number of exceptions), so I guess it's
time to try again.
We currently have three ISDN stacks in the kernel: the original
isdn4linux (with the hisax driver), the newer CAPI (with four drivers),
and finally the mISDN stack (supporting roughly the same hardware as
hisax).
As far as I can tell, anyone using ISDN with mainline kernel drivers in
the past few years uses mISDN, and this is typically used for voice-only
PBX installations that don't require a public network.
The older stacks support additional features for data networks, but those
typically make no sense any more if there is no network to connect to.
My proposal for this time is to kill off isdn4linux entirely, as it seems
to have been unusable for quite a while. This code has been abandoned
for many years and it does cause problems for treewide maintenance as
it tends to do everything that we try to stop doing.
Birger Harzenetter mentioned that is is still using i4l in order to
make use of the 'divert' feature that is not part of mISDN, but has
otherwise moved on to mISDN for normal operation, like apparently
everyone else.
CAPI in turn is not quite as obsolete, but two of the drivers (avm
and hysdn) don't seem to be used at all, while another one (gigaset)
will stop being maintained as Paul Bolle is no longer able to
test it after the network gets shut down in September.
All three are now moved into drivers/staging to let others speak
up in case there are remaining users.
This leaves Bluetooth CMTP as the only remaining user of CAPI, but
Marcel Holtmann wishes to keep maintaining it.
For the discussion on version 1, see [2]
Unfortunately, Karsten Keil as the maintainer has not participated in
the discussion.
Arnd
[1] https://patchwork.kernel.org/patch/8484861/#17900371
[2] https://listserv.isdn4linux.de/pipermail/isdn4linux/2019-April/thread.html
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset container Netfilter/IPVS update for net-next:
1) Add UDP tunnel support for ICMP errors in IPVS.
Julian Anastasov says:
This patchset is a followup to the commit that adds UDP/GUE tunnel:
"ipvs: allow tunneling with gue encapsulation".
What we do is to put tunnel real servers in hash table (patch 1),
add function to lookup tunnels (patch 2) and use it to strip the
embedded tunnel headers from ICMP errors (patch 3).
2) Extend xt_owner to match for supplementary groups, from
Lukasz Pawelczyk.
3) Remove unused oif field in flow_offload_tuple object, from
Taehee Yoo.
4) Release basechain counters from workqueue to skip synchronize_rcu()
call. From Florian Westphal.
5) Replace skb_make_writable() by skb_ensure_writable(). Patchset
from Florian Westphal.
6) Checksum support for gue encapsulation in IPVS, from Jacky Hu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-05-31
The following pull-request contains BPF updates for your *net-next* tree.
Lots of exciting new features in the first PR of this developement cycle!
The main changes are:
1) misc verifier improvements, from Alexei.
2) bpftool can now convert btf to valid C, from Andrii.
3) verifier can insert explicit ZEXT insn when requested by 32-bit JITs.
This feature greatly improves BPF speed on 32-bit architectures. From Jiong.
4) cgroups will now auto-detach bpf programs. This fixes issue of thousands
bpf programs got stuck in dying cgroups. From Roman.
5) new bpf_send_signal() helper, from Yonghong.
6) cgroup inet skb programs can signal CN to the stack, from Lawrence.
7) miscellaneous cleanups, from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phylink conflict was between a bug fix by Russell King
to make sure we have a consistent PHY interface mode, and
a change in net-next to pull some code in phylink_resolve()
into the helper functions phylink_mac_link_{up,down}()
On the dp83867 side it's mostly overlapping changes, with
the 'net' side removing a condition that was supposed to
trigger for RGMII but because of how it was coded never
actually could trigger.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add checksum support for gue encapsulation with the tun_flags parameter,
which could be one of the values below:
IP_VS_TUNNEL_ENCAP_FLAG_NOCSUM
IP_VS_TUNNEL_ENCAP_FLAG_CSUM
IP_VS_TUNNEL_ENCAP_FLAG_REMCSUM
Signed-off-by: Jacky Hu <hengqing.hu@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The XT_OWNER_SUPPL_GROUPS flag causes GIDs specified with XT_OWNER_GID
to be also checked in the supplementary groups of a process.
f_cred->group_info cannot be modified during its lifetime and f_cred
holds a reference to it so it's safe to use.
Signed-off-by: Lukasz Pawelczyk <l.pawelczyk@samsung.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
With all isdn4linux hardware drivers gone, this is only a wrapper around
CAPI to support old user space. However, from looking at the mailing
list, it seems that the last time anyone asked about it was in 2014,
when the upgrade from a linux-2.4 installation failed, and mISDN was
suggested as a replacement.
The largest public ISDN network (Deutsche Telekom) was supposed to be
shut down 2018, which must have drastically reduced the number of legacy
installations.
When we last discussed removing i4l in 2016, Karsten Keil suggested
revisiting this in 2018. I guess this is overdue.
Link: http://listserv.isdn4linux.de/pipermail/isdn4linux/2014-October/006165.html
Link: https://patchwork.kernel.org/patch/8484861/#17900371
Link: https://listserv.isdn4linux.de/pipermail/isdn4linux/2019-April/thread.html
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We would like to be able to rotate TFO keys while minimizing the number of
client cookies that are rejected. Currently, we have only one key which can
be used to generate and validate cookies, thus if we simply replace this
key clients can easily have cookies rejected upon rotation.
We propose having the ability to have both a primary key and a backup key.
The primary key is used to generate as well as to validate cookies.
The backup is only used to validate cookies. Thus, keys can be rotated as:
1) generate new key
2) add new key as the backup key
3) swap the primary and backup key, thus setting the new key as the primary
We don't simply set the new key as the primary key and move the old key to
the backup slot because the ip may be behind a load balancer and we further
allow for the fact that all machines behind the load balancer will not be
updated simultaneously.
We make use of this infrastructure in subsequent patches.
Suggested-by: Igor Lubashev <ilubashe@akamai.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ctinfo is a new tc filter action module. It is designed to restore
information contained in firewall conntrack marks to other packet fields
and is typically used on packet ingress paths. At present it has two
independent sub-functions or operating modes, DSCP restoration mode &
skb mark restoration mode.
The DSCP restore mode:
This mode copies DSCP values that have been placed in the firewall
conntrack mark back into the IPv4/v6 diffserv fields of relevant
packets.
The DSCP restoration is intended for use and has been found useful for
restoring ingress classifications based on egress classifications across
links that bleach or otherwise change DSCP, typically home ISP Internet
links. Restoring DSCP on ingress on the WAN link allows qdiscs such as
but by no means limited to CAKE to shape inbound packets according to
policies that are easier to set & mark on egress.
Ingress classification is traditionally a challenging task since
iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
lookups, hence are unable to see internal IPv4 addresses as used on the
typical home masquerading gateway. Thus marking the connection in some
manner on egress for later restoration of classification on ingress is
easier to implement.
Parameters related to DSCP restore mode:
dscpmask - a 32 bit mask of 6 contiguous bits and indicate bits of the
conntrack mark field contain the DSCP value to be restored.
statemask - a 32 bit mask of (usually) 1 bit length, outside the area
specified by dscpmask. This represents a conditional operation flag
whereby the DSCP is only restored if the flag is set. This is useful to
implement a 'one shot' iptables based classification where the
'complicated' iptables rules are only run once to classify the
connection on initial (egress) packet and subsequent packets are all
marked/restored with the same DSCP. A mask of zero disables the
conditional behaviour ie. the conntrack mark DSCP bits are always
restored to the ip diffserv field (assuming the conntrack entry is found
& the skb is an ipv4/ipv6 type)
e.g. dscpmask 0xfc000000 statemask 0x01000000
|----0xFC----conntrack mark----000000---|
| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
| DSCP | unused | flag |unused |
|-----------------------0x01---000000---|
| |
| |
---| Conditional flag
v only restore if set
|-ip diffserv-|
| 6 bits |
|-------------|
The skb mark restore mode (cpmark):
This mode copies the firewall conntrack mark to the skb's mark field.
It is completely the functional equivalent of the existing act_connmark
action with the additional feature of being able to apply a mask to the
restored value.
Parameters related to skb mark restore mode:
mask - a 32 bit mask applied to the firewall conntrack mark to mask out
bits unwanted for restoration. This can be useful where the conntrack
mark is being used for different purposes by different applications. If
not specified and by default the whole mark field is copied (i.e.
default mask of 0xffffffff)
e.g. mask 0x00ffffff to mask out the top 8 bits being used by the
aforementioned DSCP restore mode.
|----0x00----conntrack mark----ffffff---|
| Bits 31-24 | |
| DSCP & flag| some value here |
|---------------------------------------|
|
|
v
|------------skb mark-------------------|
| | |
| zeroed | |
|---------------------------------------|
Overall parameters:
zone - conntrack zone
control - action related control (reclassify | pipe | drop | continue |
ok | goto chain <CHAIN_INDEX>)
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
New UAPI for nexthops as standalone objects:
- defines netlink ancillary header, struct nhmsg
- RTM commands for nexthop objects, RTM_*NEXTHOP,
- RTNLGRP for nexthop notifications, RTNLGRP_NEXTHOP,
- Attributes for creating nexthops, NHA_*
- Attribute for route specs to specify a nexthop by id, RTA_NH_ID.
The nexthop attributes and semantics follow the route and RTA ones for
device, gateway and lwt encap. Unique to nexthop objects are a blackhole
and a group which contains references to other nexthop objects. With the
exception of blackhole and group, nexthop objects MUST contain a device.
Gateway and encap are optional. Nexthop groups can only reference other
pre-existing nexthops by id. If the NHA_ID attribute is present that id
is used for the nexthop. If not specified, one is auto assigned.
Dump requests can include attributes:
- NHA_GROUPS to return only nexthop groups,
- NHA_MASTER to limit dumps to nexthops with devices enslaved to the
given master (e.g., VRF)
- NHA_OIF to limit dumps to nexthops using given device
nlmsg_route_perms in selinux code is updated for the new RTM comands.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the FOPEN_DIRECT_IO case the write path doesn't call file_remove_privs()
and that means setuid bit is not cleared if unpriviliged user writes to a
file with setuid bit set.
pjdfstest chmod test 12.t tests this and fails.
Fix this by adding a flag to the FUSE_WRITE message that requests clearing
privileges on the given file. This needs
This better than just calling fuse_remove_privs(), because the attributes
may not be up to date, so in that case a write may miss clearing the
privileges.
Test case:
$ passthrough_ll /mnt/pasthrough-mnt -o default_permissions,allow_other,cache=never
$ mkdir /mnt/pasthrough-mnt/testdir
$ cd /mnt/pasthrough-mnt/testdir
$ prove -rv pjdfstests/tests/chmod/12.t
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
|
|
x86_64 and AArch64 perhaps are two arches that running bpf testsuite
frequently, however the zero extension insertion pass is not enabled for
them because of their hardware support.
It is critical to guarantee the pass correction as it is supposed to be
enabled at default for a couple of other arches, for example PowerPC,
SPARC, arm, NFP etc. Therefore, it would be very useful if there is a way
to test this pass on for example x86_64.
The test methodology employed by this set is "poisoning" useless bits. High
32-bit of a definition is randomized if it is identified as not used by any
later insn. Such randomization is only enabled under testing mode which is
gated by the new bpf prog load flags "BPF_F_TEST_RND_HI32".
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pule more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later".
Only the "obvious" versions of these matches are included here, a
number of "non-obvious" variants of text have been found but those
have been postponed for later review and analysis.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98
...
|
|
This patch tries to solve the following specific use case.
Currently, bpf program can already collect stack traces
through kernel function get_perf_callchain()
when certain events happens (e.g., cache miss counter or
cpu clock counter overflows). But such stack traces are
not enough for jitted programs, e.g., hhvm (jited php).
To get real stack trace, jit engine internal data structures
need to be traversed in order to get the real user functions.
bpf program itself may not be the best place to traverse
the jit engine as the traversing logic could be complex and
it is not a stable interface either.
Instead, hhvm implements a signal handler,
e.g. for SIGALARM, and a set of program locations which
it can dump stack traces. When it receives a signal, it will
dump the stack in next such program location.
Such a mechanism can be implemented in the following way:
. a perf ring buffer is created between bpf program
and tracing app.
. once a particular event happens, bpf program writes
to the ring buffer and the tracing app gets notified.
. the tracing app sends a signal SIGALARM to the hhvm.
But this method could have large delays and causing profiling
results skewed.
This patch implements bpf_send_signal() helper to send
a signal to hhvm in real time, resulting in intended stack traces.
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public licence as published by
the free software foundation either version 2 of the licence or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 114 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add link modes for 100Mbps and 1Gbps over a single pair.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds the ability for Netlink to report a socket's UID along with the
other UNIX diagnostic information that is already available. This will
allow diagnostic tools greater insight into which users control which
socket.
To test this, do the following as a non-root user:
unshare -U -r bash
nc -l -U user.socket.$$ &
.. and verify from within that same session that Netlink UNIX socket
diagnostics report the socket's UID as 0. Also verify that Netlink UNIX
socket diagnostics report the socket's UID as the user's UID from an
unprivileged process in a different session. Verify the same from
a root process.
Signed-off-by: Felipe Gasper <felipe@felipegasper.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLV_SET is called with a data pointer and a len parameter that tells us
how many bytes are pointed to by data. When invoking memcpy() we need
to careful to only copy len bytes.
Previously we would copy TLV_LENGTH(len) bytes which would copy an extra
4 bytes past the end of the data pointer which newer GCC versions
complain about.
In file included from test.c:17:
In function 'TLV_SET',
inlined from 'test' at test.c:186:5:
/usr/include/linux/tipc_config.h:317:3:
warning: 'memcpy' forming offset [33, 36] is out of the bounds [0, 32]
of object 'bearer_name' with type 'char[32]' [-Warray-bounds]
memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
test.c: In function 'test':
test.c::161:10: note:
'bearer_name' declared here
char bearer_name[TIPC_MAX_BEARER_NAME];
^~~~~~~~~~~
We still want to ensure any padding bytes at the end are initialised, do
this with a explicit memset() rather than copy bytes past the end of
data. Apply the same logic to TCM_SET.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet.
1) Use after free in __dev_map_entry_free(), from Eric Dumazet.
2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung
Cheng.
3) Orphan NFC, we'll take the patches directly into my tree. From
Johannes Berg.
4) We can't recycle cloned TCP skbs, from Eric Dumazet.
5) Some flow dissector bpf test fixes, from Stanislav Fomichev.
6) Fix RCU marking and warnings in rhashtable, from Herbert Xu.
7) Fix some potential fib6 leaks, from Eric Dumazet.
8) Fix a _decode_session4 uninitialized memory read bug fix that got
lost in a merge. From Florian Westphal.
9) Fix ipv6 source address routing wrt. exception route entries, from
Wei Wang.
10) The netdev_xmit_more() conversion was not done %100 properly in mlx5
driver, fix from Tariq Toukan.
11) Clean up botched merge on netfilter kselftest, from Florian
Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits)
of_net: fix of_get_mac_address retval if compiled without CONFIG_OF
net: fix kernel-doc warnings for socket.c
net: Treat sock->sk_drops as an unsigned int when printing
kselftests: netfilter: fix leftover net/net-next merge conflict
mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM
mlxsw: core: Prevent QSFP module initialization for old hardware
vsock/virtio: Initialize core virtio vsock before registering the driver
net/mlx5e: Fix possible modify header actions memory leak
net/mlx5e: Fix no rewrite fields with the same match
net/mlx5e: Additional check for flow destination comparison
net/mlx5e: Add missing ethtool driver info for representors
net/mlx5e: Fix number of vports for ingress ACL configuration
net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled
net/mlx5e: Fix wrong xmit_more application
net/mlx5: Fix peer pf disable hca command
net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index
net/mlx5: Add meaningful return codes to status_to_err function
net/mlx5: Imply MLXFW in mlx5_core
Revert "tipc: fix modprobe tipc failed after switch order of device registration"
vsock/virtio: free packets during the socket release
...
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- support for SVE and Pointer Authentication in guests
- PMU improvements
POWER:
- support for direct access to the POWER9 XIVE interrupt controller
- memory and performance optimizations
x86:
- support for accessing memory not backed by struct page
- fixes and refactoring
Generic:
- dirty page tracking improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (155 commits)
kvm: fix compilation on aarch64
Revert "KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU"
kvm: x86: Fix L1TF mitigation for shadow MMU
KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible
KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM device
KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing"
KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUs
kvm: nVMX: Set nested_run_pending in vmx_set_nested_state after checks complete
tests: kvm: Add tests for KVM_SET_NESTED_STATE
KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state
tests: kvm: Add tests for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_CPU_ID
tests: kvm: Add tests to .gitignore
KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2
KVM: Fix kvm_clear_dirty_log_protect off-by-(minus-)one
KVM: Fix the bitmap range to copy during clear dirty
KVM: arm64: Fix ptrauth ID register masking logic
KVM: x86: use direct accessors for RIP and RSP
KVM: VMX: Use accessors for GPRs outside of dedicated caching logic
KVM: x86: Omit caching logic for always-available GPRs
kvm, x86: Properly check whether a pfn is an MMIO or not
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-05-16
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a use after free in __dev_map_entry_free(), from Eric.
2) Several sockmap related bug fixes: a splat in strparser if
it was never initialized, remove duplicate ingress msg list
purging which can race, fix msg->sg.size accounting upon
skb to msg conversion, and last but not least fix a timeout
bug in tcp_bpf_wait_data(), from John.
3) Fix LRU map to avoid messing with eviction heuristics upon
syscall lookup, e.g. map walks from user space side will
then lead to eviction of just recently created entries on
updates as it would mark all map entries, from Daniel.
4) Don't bail out when libbpf feature probing fails. Also
various smaller fixes to flow_dissector test, from Stanislav.
5) Fix missing brackets for BTF_INT_OFFSET() in UAPI, from Gary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull nfsd updates from Bruce Fields:
"This consists mostly of nfsd container work:
Scott Mayhew revived an old api that communicates with a userspace
daemon to manage some on-disk state that's used to track clients
across server reboots. We've been using a usermode_helper upcall for
that, but it's tough to run those with the right namespaces, so a
daemon is much friendlier to container use cases.
Trond fixed nfsd's handling of user credentials in user namespaces. He
also contributed patches that allow containers to support different
sets of NFS protocol versions.
The only remaining container bug I'm aware of is that the NFS reply
cache is shared between all containers. If anyone's aware of other
gaps in our container support, let me know.
The rest of this is miscellaneous bugfixes"
* tag 'nfsd-5.2' of git://linux-nfs.org/~bfields/linux: (23 commits)
nfsd: update callback done processing
locks: move checks from locks_free_lock() to locks_release_private()
nfsd: fh_drop_write in nfsd_unlink
nfsd: allow fh_want_write to be called twice
nfsd: knfsd must use the container user namespace
SUNRPC: rsi_parse() should use the current user namespace
SUNRPC: Fix the server AUTH_UNIX userspace mappings
lockd: Pass the user cred from knfsd when starting the lockd server
SUNRPC: Temporary sockets should inherit the cred from their parent
SUNRPC: Cache the process user cred in the RPC server listener
nfsd: Allow containers to set supported nfs versions
nfsd: Add custom rpcbind callbacks for knfsd
SUNRPC: Allow further customisation of RPC program registration
SUNRPC: Clean up generic dispatcher code
SUNRPC: Add a callback to initialise server requests
SUNRPC/nfs: Fix return value for nfs4_callback_compound()
nfsd: handle legacy client tracking records sent by nfsdcld
nfsd: re-order client tracking method selection
nfsd: keep a tally of RECLAIM_COMPLETE operations when using nfsdcld
nfsd: un-deprecate nfsdcld
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm updates for 5.2
- guest SVE support
- guest Pointer Authentication support
- Better discrimination of perf counters between host and guests
Conflicts:
include/uapi/linux/kvm.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
PPC KVM update for 5.2
* Support for guests to access the new POWER9 XIVE interrupt controller
hardware directly, reducing interrupt latency and overhead for guests.
* In-kernel implementation of the H_PAGE_INIT hypercall.
* Reduce memory usage of sparsely-populated IOMMU tables.
* Several bug fixes.
Second PPC KVM update for 5.2
* Fix a bug, fix a spelling mistake, remove some useless code.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration changes:
- Add _HPX Type 3 settings support, which gives firmware more
influence over device configuration (Alexandru Gagniuc)
- Support fixed bus numbers from bridge Enhanced Allocation
capabilities (Subbaraya Sundeep)
- Add "external-facing" DT property to identify cases where we
require IOMMU protection against untrusted devices (Jean-Philippe
Brucker)
- Enable PCIe services for host controller drivers that use managed
host bridge alloc (Jean-Philippe Brucker)
- Log PCIe port service messages with pci_dev, not the pcie_device
(Frederick Lawler)
- Convert pciehp from pciehp_debug module parameter to generic
dynamic debug (Frederick Lawler)
Peer-to-peer DMA:
- Add whitelist of Root Complexes that support peer-to-peer DMA
between Root Ports (Christian König)
Native controller drivers:
- Add PCI host bridge DMA ranges for bridges that can't DMA
everywhere, e.g., iProc (Srinath Mannam)
- Add Amazon Annapurna Labs PCIe host controller driver (Jonathan
Chocron)
- Fix Tegra MSI target allocation so DMA doesn't generate unwanted
MSIs (Vidya Sagar)
- Fix of_node reference leaks (Wen Yang)
- Fix Hyper-V module unload & device removal issues (Dexuan Cui)
- Cleanup R-Car driver (Marek Vasut)
- Cleanup Keystone driver (Kishon Vijay Abraham I)
- Cleanup i.MX6 driver (Andrey Smirnov)
Significant bug fixes:
- Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude
Paul)
- Fix Switchtec firmware update performance issue (Wesley Sheng)
- Work around Pericom switch link retraining erratum (Stefan Mätje)"
* tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits)
MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI
PCI: pciehp: Remove pointless MY_NAME definition
PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition
PCI: pciehp: Remove unused dbg/err/info/warn() wrappers
PCI: pciehp: Log messages with pci_dev, not pcie_device
PCI: pciehp: Replace pciehp_debug module param with dyndbg
PCI: pciehp: Remove pciehp_debug uses
PCI/AER: Log messages with pci_dev, not pcie_device
PCI/DPC: Log messages with pci_dev, not pcie_device
PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info()
PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc
PCI: Replace printk(KERN_INFO) with pr_info(), etc
PCI: Use dev_printk() when possible
PCI: Cleanup setup-bus.c comments and whitespace
PCI: imx6: Allow asynchronous probing
PCI: dwc: Save root bus for driver remove hooks
PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code
PCI: dwc: Free MSI in dw_pcie_host_init() error path
PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()
...
|
|
Merge misc updates from Andrew Morton:
- a few misc things and hotfixes
- ocfs2
- almost all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (139 commits)
kernel/memremap.c: remove the unused device_private_entry_fault() export
mm: delete find_get_entries_tag
mm/huge_memory.c: make __thp_get_unmapped_area static
mm/mprotect.c: fix compilation warning because of unused 'mm' variable
mm/page-writeback: introduce tracepoint for wait_on_page_writeback()
mm/vmscan: simplify trace_reclaim_flags and trace_shrink_flags
mm/Kconfig: update "Memory Model" help text
mm/vmscan.c: don't disable irq again when count pgrefill for memcg
mm: memblock: make keeping memblock memory opt-in rather than opt-out
hugetlbfs: always use address space in inode for resv_map pointer
mm/z3fold.c: support page migration
mm/z3fold.c: add structure for buddy handles
mm/z3fold.c: improve compression by extending search
mm/z3fold.c: introduce helper functions
mm/page_alloc.c: remove unnecessary parameter in rmqueue_pcplist
mm/hmm: add ARCH_HAS_HMM_MIRROR ARCH_HAS_HMM_DEVICE Kconfig
mm/vmscan.c: simplify shrink_inactive_list()
fs/sync.c: sync_file_range(2) may use WB_SYNC_ALL writeback
xen/privcmd-buf.c: convert to use vm_map_pages_zero()
xen/gntdev.c: convert to use vm_map_pages()
...
|
|
23d0127096cb ("fs/sync.c: make sync_file_range(2) use WB_SYNC_NONE
writeback") claims that sync_file_range(2) syscall was "created for
userspace to be able to issue background writeout and so waiting for
in-flight IO is undesirable there" and changes the writeback (back) to
WB_SYNC_NONE.
This claim is only partially true. It is true for users that use the flag
SYNC_FILE_RANGE_WRITE by itself, as does PostgreSQL, the user that was the
reason for changing to WB_SYNC_NONE writeback.
However, that claim is not true for users that use that flag combination
SYNC_FILE_RANGE_{WAIT_BEFORE|WRITE|_WAIT_AFTER}. Those users explicitly
requested to wait for in-flight IO as well as to writeback of dirty pages.
Re-brand that flag combination as SYNC_FILE_RANGE_WRITE_AND_WAIT and use
WB_SYNC_ALL writeback to perform the full range sync request.
Link: http://lkml.kernel.org/r/20190409114922.30095-1-amir73il@gmail.com
Link: http://lkml.kernel.org/r/20190419072938.31320-1-amir73il@gmail.com
Fixes: 23d0127096cb ("fs/sync.c: make sync_file_range(2) use WB_SYNC_NONE")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Jan Kara <jack@suse.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse update from Miklos Szeredi:
"Add more caching controls for userspace filesystems to use, as well as
bug fixes and cleanups"
* tag 'fuse-update-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: clean up fuse_alloc_inode
fuse: Add ioctl flag for x32 compat ioctl
fuse: Convert fusectl to use the new mount API
fuse: fix changelog entry for protocol 7.9
fuse: fix changelog entry for protocol 7.12
fuse: document fuse_fsync_in.fsync_flags
fuse: Add FOPEN_STREAM to use stream_open()
fuse: require /dev/fuse reads to have enough buffer capacity
fuse: retrieve: cap requested size to negotiated max_write
fuse: allow filesystems to have precise control over data cache
fuse: convert printk -> pr_*
fuse: honor RLIMIT_FSIZE in fuse_file_fallocate
fuse: fix writepages on 32bit
|
|
'VAL' should be protected by the brackets.
v2:
* Squash the fix for Documentation/bpf/btf.rst
Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Gary Lin <glin@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
- Cleanup PCI register definitions, typos, etc (Bjorn Helgaas)
- Remove unnecessary use of user-space types in CPER (Bjorn Helgaas)
- Cleanup setup-bus.c comments & whitespace (Nicholas Johnson)
* pci/trivial:
PCI: Cleanup setup-bus.c comments and whitespace
CPER: Remove unnecessary use of user-space types
CPER: Add UEFI spec references
PCI: Fix comment typos
PCI: Cleanup register definition width and whitespace
# Conflicts:
# drivers/pci/pci.c
# drivers/pci/setup-bus.c
|
|
- Support all 255 PFF ports in switchtec driver (Wesley Sheng)
- Fix unintentional switchtec MRPC event masking that degraded firmware
update speed (Wesley Sheng)
* pci/switchtec:
switchtec: Fix unintended mask of MRPC event
switchtec: Increase PFF limit from 48 to 255
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"A few new drivers:
- driver for Azoteq IQS550/572/525 touch controllers
- driver for Microchip AT42QT1050 keys
- driver for GPIO controllable vibrators
- support for GT5663 in Goodix driver
... along with miscellaneous driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: libps2 - mark expected switch fall-through
Input: qt1050 - add Microchip AT42QT1050 support
Input: add support for Azoteq IQS550/572/525
Input: add a driver for GPIO controllable vibrators
Input: synaptics-rmi4 - fix enum_fmt
Input: synaptics-rmi4 - fill initial format
HID: input: add mapping for KEY_KBD_LAYOUT_NEXT
Input: add KEY_KBD_LAYOUT_NEXT
Input: hyperv-keyboard - add module description
Input: olpc_apsp - depend on ARCH_MMP
Input: sun4i-a10-lradc-keys - add support for A83T
Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify code
Input: lpc32xx-key - add clocks property and fix DT binding example
Input: i8042 - signal wakeup from atkbd/psmouse
Input: goodix - add GT5663 CTP support
Input: goodix - add regulators suppot
Input: evdev - use struct_size() in kzalloc() and vzalloc()
Input: edt-ft5x06 - convert to use SPDX identifier
Input: edt-ft5x06 - enable ACPI enumeration
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Postpone chain policy update to drop after transaction is complete,
from Florian Westphal.
2) Add entry to flowtable after confirmation to fix UDP flows with
packets going in one single direction.
3) Reference count leak in dst object, from Taehee Yoo.
4) Check for TTL field in flowtable datapath, from Taehee Yoo.
5) Fix h323 conntrack helper due to incorrect boundary check,
from Jakub Jankowski.
6) Fix incorrect rcu dereference when fetching basechain stats,
from Florian Westphal.
7) Missing error check when adding new entries to flowtable,
from Taehee Yoo.
8) Use version field in nfnetlink message to honor the nfgen_family
field, from Kristian Evensen.
9) Remove incorrect configuration check for CONFIG_NF_CONNTRACK_IPV6,
from Subash Abhinov Kasiviswanathan.
10) Prevent dying entries from being added to the flowtable,
from Taehee Yoo.
11) Don't hit WARN_ON() with malformed blob in ebtables with
trailing data after last rule, reported by syzbot, patch
from Florian Westphal.
12) Remove NFT_CT_TIMEOUT enumeration, never used in the kernel
code.
13) Fix incorrect definition for NFT_LOGLEVEL_MAX, from Florian
Westphal.
This batch comes with a conflict that can be fixed with this patch:
diff --cc include/uapi/linux/netfilter/nf_tables.h
index 7bdb234f3d8c,f0cf7b0f4f35..505393c6e959
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@@ -966,6 -966,8 +966,7 @@@ enum nft_socket_keys
* @NFT_CT_DST_IP: conntrack layer 3 protocol destination (IPv4 address)
* @NFT_CT_SRC_IP6: conntrack layer 3 protocol source (IPv6 address)
* @NFT_CT_DST_IP6: conntrack layer 3 protocol destination (IPv6 address)
- * @NFT_CT_TIMEOUT: connection tracking timeout policy assigned to conntrack
+ * @NFT_CT_ID: conntrack id
*/
enum nft_ct_keys {
NFT_CT_STATE,
@@@ -991,6 -993,8 +992,7 @@@
NFT_CT_DST_IP,
NFT_CT_SRC_IP6,
NFT_CT_DST_IP6,
- NFT_CT_TIMEOUT,
+ NFT_CT_ID,
__NFT_CT_MAX
};
#define NFT_CT_MAX (__NFT_CT_MAX - 1)
That replaces the unused NFT_CT_TIMEOUT definition by NFT_CT_ID. If you prefer,
I can also solve this conflict here, just let me know.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit brings many minor fixes to the documentation for BPF helper
functions. Mostly, this is limited to formatting fixes and improvements.
In particular, fix broken formatting for bpf_skb_adjust_room().
Besides formatting, replace the mention of "bpf_fullsock()" (that is not
associated with any function or type exposed to the user) in the
description of bpf_sk_storage_get() by "full socket".
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
"Underlaying packet buffer" should be an "underlying" one, in the
warning about invalidated data and data_end pointers. Through
copy-and-paste, the typo occurred no fewer than 19 times in the
documentation. Let's fix it.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
should be same as NFT_LOGLEVEL_AUDIT, so use -, not +.
Fixes: 7eced5ab5a73 ("netfilter: nf_tables: add NFT_LOGLEVEL_* enumeration and use it")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Prepare input updates for 5.2 merge window.
|
