summaryrefslogtreecommitdiff
path: root/include/uapi/linux/usb/ch9.h
AgeCommit message (Collapse)AuthorFilesLines
2021-03-24USB: replace hardcode maximum usb string length by definitionMacpaul Lin1-0/+3
commit 81c7462883b0cc0a4eeef0687f80ad5b5baee5f6 upstream. Replace hardcoded maximum USB string length (126 bytes) by definition "USB_MAX_STRING_LEN". Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1592471618-29428-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20usb: add helper to extract bits 12:11 of wMaxPacketSizeFelipe Balbi1-0/+19
commit 541b6fe63023f3059cf85d47ff2767a3e42a8e44 upstream. According to USB Specification 2.0 table 9-4, wMaxPacketSize is a bitfield. Endpoint's maxpacket is laid out in bits 10:0. For high-speed, high-bandwidth isochronous endpoints, bits 12:11 contain a multiplier to tell us how many transactions we want to try per uframe. This means that if we want an isochronous endpoint to issue 3 transfers of 1024 bytes per uframe, wMaxPacketSize should contain the value: 1024 | (2 << 11) or 5120 (0x1400). In order to make Host and Peripheral controller drivers' life easier, we're adding a helper which returns bits 12:11. Note that no care is made WRT to checking endpoint type and gadget's speed. That's left for drivers to handle. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-10USB: core: Add type-specific length check of BOS descriptorsMasakazu Mokuno1-0/+3
commit 81cf4a45360f70528f1f64ba018d61cb5767249a upstream. As most of BOS descriptors are longer in length than their header 'struct usb_dev_cap_header', comparing solely with it is not sufficient to avoid out-of-bounds access to BOS descriptors. This patch adds descriptor type specific length check in usb_get_bos_descriptor() to fix the issue. Signed-off-by: Masakazu Mokuno <masakazu.mokuno@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12USB: fix out-of-bounds in usb_set_configurationGreg Kroah-Hartman1-0/+1
commit bd7a3fe770ebd8391d1c7d072ff88e9e76d063eb upstream. Andrey Konovalov reported a possible out-of-bounds problem for a USB interface association descriptor. He writes: It seems there's no proper size check of a USB_DT_INTERFACE_ASSOCIATION descriptor. It's only checked that the size is >= 2 in usb_parse_configuration(), so find_iad() might do out-of-bounds access to intf_assoc->bInterfaceCount. And he's right, we don't check for crazy descriptors of this type very well, so resolve this problem. Yet another issue found by syzkaller... Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-18USB: PD: additional feature selectorsOliver Neukum1-0/+16
This adds the feature selectors from Table 9-8 Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-18USB: PD: define specific requestsOliver Neukum1-0/+7
This takes the definitions of requests from chapter 9.3.1 of the USB Power Delivery spec. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-18USB: add descriptors from USB Power Delivery specOliver Neukum1-0/+98
Adding the descriptors of chapter 9.2 of the Power Delivery spec. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-29usb: ch9: Fix SSP Device Cap wFunctionalitySupport typeJohn Youn1-1/+1
The wFunctionalitySupport field should be __le16. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-04usb: add OTG status selector definition for HNP pollingLi Jun1-0/+1
A host is required to use the GetStatus command, with wIndex set to the OTG status selector(F000H) to request the Host request flag from the peripheral. Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: ch9: Add size macro for SSP dev cap descriptorJohn Youn1-0/+6
The SuperspeedPlus Device Capability Descriptor has a variable size depending on the number of sublink speed attributes. This patch adds a macro to calculate that size. The macro takes one argument, the Sublink Speed Attribute Count (SSAC) as reported by the descriptor in bmAttributes[4:0]. See USB 3.1 9.6.2.5, Table 9-19. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-15usb: Add USB 3.1 Precision time measurement capability descriptor supportMathias Nyman1-0/+10
USB 3.1 devices that support precision time measurement have an additional PTM cabaility descriptor as part of the full BOS descriptor Look for this descriptor while parsing the BOS descriptor, and store it in struct usb_hub_bos if it exists. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-15usb: Add USB3.1 SuperSpeedPlus Isoc Endpoint Companion descriptorMathias Nyman1-0/+18
USB3.1 specifies a SuperSpeedPlus Isoc endpoint companion descriptor which is returned as part of the devices complete configuration descriptor. It contains number of bytes per service interval which is needed when reserving bus time in the schedule for transfers over 48K bytes per service interval. If bmAttributes bit 7 is set in the old SuperSpeed Endpoint Companion descriptor, it will be ollowed by the new SuperSpeedPlus Isoc Endpoint Companion descriptor. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-25usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devicesMathias Nyman1-0/+1
Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: Add USB 3.1 SuperSpeedPlus device capability descriptorMathias Nyman1-0/+29
USB 3.1 SuperSpeedPlus device capability descriptor is returned as part of the bos descriptor for devices that support SuperSpeedPlus protocol. The descriptor contains more detailed information about the supported speeds of the device. More details about the descriptor can be found in the USB 3.1 specification section 9.6.2.5 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-29usb: add USB_OTG_ADP definitionMacpaul Lin1-0/+1
Add USB_OTG_ADP definition for usb_otg_descriptor.bmAttributes. Signed-off-by: Macpaul Lin <macpaul@gmail.com> Signed-off-by: Li Jun <jun.li@freescale.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29usb: add usb_otg20_descriptor for OTG 2.0 and aboveMacpaul Lin1-0/+11
OTG 2.0 introduces bcdOTG in otg descriptor to identify the OTG and EH supplement release number with which the OTG device is compliant, this patch adds structure usb_otg20_descriptor for OTG 2.0 and above. Signed-off-by: Macpaul Lin <macpaul@gmail.com> Signed-off-by: Li Jun <jun.li@freescale.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-08USB: fix an incorrect table index in commentHuang Rui1-2/+2
Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24usb: Using correct way to clear usb3.0 device's remote wakeup feature.Lan Tianyu1-0/+6
Usb3.0 device defines function remote wakeup which is only for interface recipient rather than device recipient. This is different with usb2.0 device's remote wakeup feature which is defined for device recipient. According usb3.0 spec 9.4.5, the function remote wakeup can be modified by the SetFeature() requests using the FUNCTION_SUSPEND feature selector. This patch is to use correct way to disable usb3.0 device's function remote wakeup after suspend error and resuming. This should be backported to kernels as old as 3.4, that contain the commit 623bef9e03a60adc623b09673297ca7a1cdfb367 "USB/xhci: Enable remote wakeup for USB3 devices." Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-10-09UAPI: (Scripted) Disintegrate include/linux/usbDavid Howells1-0/+993
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 08:18:19 +0300