summaryrefslogtreecommitdiff
path: root/include/uapi/linux/fscrypt.h
AgeCommit message (Collapse)AuthorFilesLines
2020-05-19fscrypt: add support for IV_INO_LBLK_32 policiesEric Biggers1-1/+2
The eMMC inline crypto standard will only specify 32 DUN bits (a.k.a. IV bits), unlike UFS's 64. IV_INO_LBLK_64 is therefore not applicable, but an encryption format which uses one key per policy and permits the moving of encrypted file contents (as f2fs's garbage collector requires) is still desirable. To support such hardware, add a new encryption format IV_INO_LBLK_32 that makes the best use of the 32 bits: the IV is set to 'SipHash-2-4(inode_number) + file_logical_block_number mod 2^32', where the SipHash key is derived from the fscrypt master key. We hash only the inode number and not also the block number, because we need to maintain contiguity of DUNs to merge bios. Unlike with IV_INO_LBLK_64, with this format IV reuse is possible; this is unavoidable given the size of the DUN. This means this format should only be used where the requirements of the first paragraph apply. However, the hash spreads out the IVs in the whole usable range, and the use of a keyed hash makes it difficult for an attacker to determine which files use which IVs. Besides the above differences, this flag works like IV_INO_LBLK_64 in that on ext4 it is only allowed if the stable_inodes feature has been enabled to prevent inode numbers and the filesystem UUID from changing. Link: https://lore.kernel.org/r/20200515204141.251098-1-ebiggers@kernel.org Reviewed-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Paul Crowley <paulcrowley@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-03-20fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctlEric Biggers1-0/+1
Add an ioctl FS_IOC_GET_ENCRYPTION_NONCE which retrieves the nonce from an encrypted file or directory. The nonce is the 16-byte random value stored in the inode's encryption xattr. It is normally used together with the master key to derive the inode's actual encryption key. The nonces are needed by automated tests that verify the correctness of the ciphertext on-disk. Except for the IV_INO_LBLK_64 case, there's no way to replicate a file's ciphertext without knowing that file's nonce. The nonces aren't secret, and the existing ciphertext verification tests in xfstests retrieve them from disk using debugfs or dump.f2fs. But in environments that lack these debugging tools, getting the nonces by manually parsing the filesystem structure would be very hard. To make this important type of testing much easier, let's just add an ioctl that retrieves the nonce. Link: https://lore.kernel.org/r/20200314205052.93294-2-ebiggers@kernel.org Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-12-31fscrypt: include <linux/ioctl.h> in UAPI headerEric Biggers1-0/+1
<linux/fscrypt.h> defines ioctl numbers using the macros like _IOWR() which are defined in <linux/ioctl.h>, so <linux/ioctl.h> should be included as a prerequisite, like it is in many other kernel headers. In practice this doesn't really matter since anyone referencing these ioctl numbers will almost certainly include <sys/ioctl.h> too in order to actually call ioctl(). But we might as well fix this. Link: https://lore.kernel.org/r/20191219185624.21251-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-12-31fscrypt: support passing a keyring key to FS_IOC_ADD_ENCRYPTION_KEYEric Biggers1-1/+12
Extend the FS_IOC_ADD_ENCRYPTION_KEY ioctl to allow the raw key to be specified by a Linux keyring key, rather than specified directly. This is useful because fscrypt keys belong to a particular filesystem instance, so they are destroyed when that filesystem is unmounted. Usually this is desired. But in some cases, userspace may need to unmount and re-mount the filesystem while keeping the keys, e.g. during a system update. This requires keeping the keys somewhere else too. The keys could be kept in memory in a userspace daemon. But depending on the security architecture and assumptions, it can be preferable to keep them only in kernel memory, where they are unreadable by userspace. We also can't solve this by going back to the original fscrypt API (where for each file, the master key was looked up in the process's keyring hierarchy) because that caused lots of problems of its own. Therefore, add the ability for FS_IOC_ADD_ENCRYPTION_KEY to accept a Linux keyring key. This solves the problem by allowing userspace to (if needed) save the keys securely in a Linux keyring for re-provisioning, while still using the new fscrypt key management ioctls. This is analogous to how dm-crypt accepts a Linux keyring key, but the key is then stored internally in the dm-crypt data structures rather than being looked up again each time the dm-crypt device is accessed. Use a custom key type "fscrypt-provisioning" rather than one of the existing key types such as "logon". This is strongly desired because it enforces that these keys are only usable for a particular purpose: for fscrypt as input to a particular KDF. Otherwise, the keys could also be passed to any kernel API that accepts a "logon" key with any service prefix, e.g. dm-crypt, UBIFS, or (recently proposed) AF_ALG. This would risk leaking information about the raw key despite it ostensibly being unreadable. Of course, this mistake has already been made for multiple kernel APIs; but since this is a new API, let's do it right. This patch has been tested using an xfstest which I wrote to test it. Link: https://lore.kernel.org/r/20191119222447.226853-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-11-06fscrypt: add support for IV_INO_LBLK_64 policiesEric Biggers1-1/+2
Inline encryption hardware compliant with the UFS v2.1 standard or with the upcoming version of the eMMC standard has the following properties: (1) Per I/O request, the encryption key is specified by a previously loaded keyslot. There might be only a small number of keyslots. (2) Per I/O request, the starting IV is specified by a 64-bit "data unit number" (DUN). IV bits 64-127 are assumed to be 0. The hardware automatically increments the DUN for each "data unit" of configurable size in the request, e.g. for each filesystem block. Property (1) makes it inefficient to use the traditional fscrypt per-file keys. Property (2) precludes the use of the existing DIRECT_KEY fscrypt policy flag, which needs at least 192 IV bits. Therefore, add a new fscrypt policy flag IV_INO_LBLK_64 which causes the encryption to modified as follows: - The encryption keys are derived from the master key, encryption mode number, and filesystem UUID. - The IVs are chosen as (inode_number << 32) | file_logical_block_num. For filenames encryption, file_logical_block_num is 0. Since the file nonces aren't used in the key derivation, many files may share the same encryption key. This is much more efficient on the target hardware. Including the inode number in the IVs and mixing the filesystem UUID into the keys ensures that data in different files is nevertheless still encrypted differently. Additionally, limiting the inode and block numbers to 32 bits and placing the block number in the low bits maintains compatibility with the 64-bit DUN convention (property (2) above). Since this scheme assumes that inode numbers are stable (which may preclude filesystem shrinking) and that inode and file logical block numbers are at most 32-bit, IV_INO_LBLK_64 will only be allowed on filesystems that meet these constraints. These are acceptable limitations for the cases where this format would actually be used. Note that IV_INO_LBLK_64 is an on-disk format, not an implementation. This patch just adds support for it using the existing filesystem layer encryption. A later patch will add support for inline encryption. Reviewed-by: Paul Crowley <paulcrowley@google.com> Co-developed-by: Satya Tangirala <satyat@google.com> Signed-off-by: Satya Tangirala <satyat@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-13fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctlEric Biggers1-0/+1
Add a root-only variant of the FS_IOC_REMOVE_ENCRYPTION_KEY ioctl which removes all users' claims of the key, not just the current user's claim. I.e., it always removes the key itself, no matter how many users have added it. This is useful for forcing a directory to be locked, without having to figure out which user ID(s) the key was added under. This is planned to be used by a command like 'sudo fscrypt lock DIR --all-users' in the fscrypt userspace tool (http://github.com/google/fscrypt). Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-13fscrypt: allow unprivileged users to add/remove keys for v2 policiesEric Biggers1-1/+5
Allow the FS_IOC_ADD_ENCRYPTION_KEY and FS_IOC_REMOVE_ENCRYPTION_KEY ioctls to be used by non-root users to add and remove encryption keys from the filesystem-level crypto keyrings, subject to limitations. Motivation: while privileged fscrypt key management is sufficient for some users (e.g. Android and Chromium OS, where a privileged process manages all keys), the old API by design also allows non-root users to set up and use encrypted directories, and we don't want to regress on that. Especially, we don't want to force users to continue using the old API, running into the visibility mismatch between files and keyrings and being unable to "lock" encrypted directories. Intuitively, the ioctls have to be privileged since they manipulate filesystem-level state. However, it's actually safe to make them unprivileged if we very carefully enforce some specific limitations. First, each key must be identified by a cryptographic hash so that a user can't add the wrong key for another user's files. For v2 encryption policies, we use the key_identifier for this. v1 policies don't have this, so managing keys for them remains privileged. Second, each key a user adds is charged to their quota for the keyrings service. Thus, a user can't exhaust memory by adding a huge number of keys. By default each non-root user is allowed up to 200 keys; this can be changed using the existing sysctl 'kernel.keys.maxkeys'. Third, if multiple users add the same key, we keep track of those users of the key (of which there remains a single copy), and won't really remove the key, i.e. "lock" the encrypted files, until all those users have removed it. This prevents denial of service attacks that would be possible under simpler schemes, such allowing the first user who added a key to remove it -- since that could be a malicious user who has compromised the key. Of course, encryption keys should be kept secret, but the idea is that using encryption should never be *less* secure than not using encryption, even if your key was compromised. We tolerate that a user will be unable to really remove a key, i.e. unable to "lock" their encrypted files, if another user has added the same key. But in a sense, this is actually a good thing because it will avoid providing a false notion of security where a key appears to have been removed when actually it's still in memory, available to any attacker who compromises the operating system kernel. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-13fscrypt: v2 encryption policy supportEric Biggers1-8/+49
Add a new fscrypt policy version, "v2". It has the following changes from the original policy version, which we call "v1" (*): - Master keys (the user-provided encryption keys) are only ever used as input to HKDF-SHA512. This is more flexible and less error-prone, and it avoids the quirks and limitations of the AES-128-ECB based KDF. Three classes of cryptographically isolated subkeys are defined: - Per-file keys, like used in v1 policies except for the new KDF. - Per-mode keys. These implement the semantics of the DIRECT_KEY flag, which for v1 policies made the master key be used directly. These are also planned to be used for inline encryption when support for it is added. - Key identifiers (see below). - Each master key is identified by a 16-byte master_key_identifier, which is derived from the key itself using HKDF-SHA512. This prevents users from associating the wrong key with an encrypted file or directory. This was easily possible with v1 policies, which identified the key by an arbitrary 8-byte master_key_descriptor. - The key must be provided in the filesystem-level keyring, not in a process-subscribed keyring. The following UAPI additions are made: - The existing ioctl FS_IOC_SET_ENCRYPTION_POLICY can now be passed a fscrypt_policy_v2 to set a v2 encryption policy. It's disambiguated from fscrypt_policy/fscrypt_policy_v1 by the version code prefix. - A new ioctl FS_IOC_GET_ENCRYPTION_POLICY_EX is added. It allows getting the v1 or v2 encryption policy of an encrypted file or directory. The existing FS_IOC_GET_ENCRYPTION_POLICY ioctl could not be used because it did not have a way for userspace to indicate which policy structure is expected. The new ioctl includes a size field, so it is extensible to future fscrypt policy versions. - The ioctls FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY, and FS_IOC_GET_ENCRYPTION_KEY_STATUS now support managing keys for v2 encryption policies. Such keys are kept logically separate from keys for v1 encryption policies, and are identified by 'identifier' rather than by 'descriptor'. The 'identifier' need not be provided when adding a key, since the kernel will calculate it anyway. This patch temporarily keeps adding/removing v2 policy keys behind the same permission check done for adding/removing v1 policy keys: capable(CAP_SYS_ADMIN). However, the next patch will carefully take advantage of the cryptographically secure master_key_identifier to allow non-root users to add/remove v2 policy keys, thus providing a full replacement for v1 policies. (*) Actually, in the API fscrypt_policy::version is 0 while on-disk fscrypt_context::format is 1. But I believe it makes the most sense to advance both to '2' to have them be in sync, and to consider the numbering to start at 1 except for the API quirk. Reviewed-by: Paul Crowley <paulcrowley@google.com> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-13fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctlEric Biggers1-0/+15
Add a new fscrypt ioctl, FS_IOC_GET_ENCRYPTION_KEY_STATUS. Given a key specified by 'struct fscrypt_key_specifier' (the same way a key is specified for the other fscrypt key management ioctls), it returns status information in a 'struct fscrypt_get_key_status_arg'. The main motivation for this is that applications need to be able to check whether an encrypted directory is "unlocked" or not, so that they can add the key if it is not, and avoid adding the key (which may involve prompting the user for a passphrase) if it already is. It's possible to use some workarounds such as checking whether opening a regular file fails with ENOKEY, or checking whether the filenames "look like gibberish" or not. However, no workaround is usable in all cases. Like the other key management ioctls, the keyrings syscalls may seem at first to be a good fit for this. Unfortunately, they are not. Even if we exposed the keyring ID of the ->s_master_keys keyring and gave everyone Search permission on it (note: currently the keyrings permission system would also allow everyone to "invalidate" the keyring too), the fscrypt keys have an additional state that doesn't map cleanly to the keyrings API: the secret can be removed, but we can be still tracking the files that were using the key, and the removal can be re-attempted or the secret added again. After later patches, some applications will also need a way to determine whether a key was added by the current user vs. by some other user. Reserved fields are included in fscrypt_get_key_status_arg for this and other future extensions. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-13fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctlEric Biggers1-0/+9
Add a new fscrypt ioctl, FS_IOC_REMOVE_ENCRYPTION_KEY. This ioctl removes an encryption key that was added by FS_IOC_ADD_ENCRYPTION_KEY. It wipes the secret key itself, then "locks" the encrypted files and directories that had been unlocked using that key -- implemented by evicting the relevant dentries and inodes from the VFS caches. The problem this solves is that many fscrypt users want the ability to remove encryption keys, causing the corresponding encrypted directories to appear "locked" (presented in ciphertext form) again. Moreover, users want removing an encryption key to *really* remove it, in the sense that the removed keys cannot be recovered even if kernel memory is compromised, e.g. by the exploit of a kernel security vulnerability or by a physical attack. This is desirable after a user logs out of the system, for example. In many cases users even already assume this to be the case and are surprised to hear when it's not. It is not sufficient to simply unlink the master key from the keyring (or to revoke or invalidate it), since the actual encryption transform objects are still pinned in memory by their inodes. Therefore, to really remove a key we must also evict the relevant inodes. Currently one workaround is to run 'sync && echo 2 > /proc/sys/vm/drop_caches'. But, that evicts all unused inodes in the system rather than just the inodes associated with the key being removed, causing severe performance problems. Moreover, it requires root privileges, so regular users can't "lock" their encrypted files. Another workaround, used in Chromium OS kernels, is to add a new VFS-level ioctl FS_IOC_DROP_CACHE which is a more restricted version of drop_caches that operates on a single super_block. It does: shrink_dcache_sb(sb); invalidate_inodes(sb, false); But it's still a hack. Yet, the major users of filesystem encryption want this feature badly enough that they are actually using these hacks. To properly solve the problem, start maintaining a list of the inodes which have been "unlocked" using each master key. Originally this wasn't possible because the kernel didn't keep track of in-use master keys at all. But, with the ->s_master_keys keyring it is now possible. Then, add an ioctl FS_IOC_REMOVE_ENCRYPTION_KEY. It finds the specified master key in ->s_master_keys, then wipes the secret key itself, which prevents any additional inodes from being unlocked with the key. Then, it syncs the filesystem and evicts the inodes in the key's list. The normal inode eviction code will free and wipe the per-file keys (in ->i_crypt_info). Note that freeing ->i_crypt_info without evicting the inodes was also considered, but would have been racy. Some inodes may still be in use when a master key is removed, and we can't simply revoke random file descriptors, mmap's, etc. Thus, the ioctl simply skips in-use inodes, and returns -EBUSY to indicate that some inodes weren't evicted. The master key *secret* is still removed, but the fscrypt_master_key struct remains to keep track of the remaining inodes. Userspace can then retry the ioctl to evict the remaining inodes. Alternatively, if userspace adds the key again, the refreshed secret will be associated with the existing list of inodes so they remain correctly tracked for future key removals. The ioctl doesn't wipe pagecache pages. Thus, we tolerate that after a kernel compromise some portions of plaintext file contents may still be recoverable from memory. This can be solved by enabling page poisoning system-wide, which security conscious users may choose to do. But it's very difficult to solve otherwise, e.g. note that plaintext file contents may have been read in other places than pagecache pages. Like FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY is initially restricted to privileged users only. This is sufficient for some use cases, but not all. A later patch will relax this restriction, but it will require introducing key hashes, among other changes. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-13fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctlEric Biggers1-10/+39
Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY. This ioctl adds an encryption key to the filesystem's fscrypt keyring ->s_master_keys, making any files encrypted with that key appear "unlocked". Why we need this ~~~~~~~~~~~~~~~~ The main problem is that the "locked/unlocked" (ciphertext/plaintext) status of encrypted files is global, but the fscrypt keys are not. fscrypt only looks for keys in the keyring(s) the process accessing the filesystem is subscribed to: the thread keyring, process keyring, and session keyring, where the session keyring may contain the user keyring. Therefore, userspace has to put fscrypt keys in the keyrings for individual users or sessions. But this means that when a process with a different keyring tries to access encrypted files, whether they appear "unlocked" or not is nondeterministic. This is because it depends on whether the files are currently present in the inode cache. Fixing this by consistently providing each process its own view of the filesystem depending on whether it has the key or not isn't feasible due to how the VFS caches work. Furthermore, while sometimes users expect this behavior, it is misguided for two reasons. First, it would be an OS-level access control mechanism largely redundant with existing access control mechanisms such as UNIX file permissions, ACLs, LSMs, etc. Encryption is actually for protecting the data at rest. Second, almost all users of fscrypt actually do need the keys to be global. The largest users of fscrypt, Android and Chromium OS, achieve this by having PID 1 create a "session keyring" that is inherited by every process. This works, but it isn't scalable because it prevents session keyrings from being used for any other purpose. On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't similarly abuse the session keyring, so to make 'sudo' work on all systems it has to link all the user keyrings into root's user keyring [2]. This is ugly and raises security concerns. Moreover it can't make the keys available to system services, such as sshd trying to access the user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to read certificates from the user's home directory (see [5]); or to Docker containers (see [6], [7]). By having an API to add a key to the *filesystem* we'll be able to fix the above bugs, remove userspace workarounds, and clearly express the intended semantics: the locked/unlocked status of an encrypted directory is global, and encryption is orthogonal to OS-level access control. Why not use the add_key() syscall ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We use an ioctl for this API rather than the existing add_key() system call because the ioctl gives us the flexibility needed to implement fscrypt-specific semantics that will be introduced in later patches: - Supporting key removal with the semantics such that the secret is removed immediately and any unused inodes using the key are evicted; also, the eviction of any in-use inodes can be retried. - Calculating a key-dependent cryptographic identifier and returning it to userspace. - Allowing keys to be added and removed by non-root users, but only keys for v2 encryption policies; and to prevent denial-of-service attacks, users can only remove keys they themselves have added, and a key is only really removed after all users who added it have removed it. Trying to shoehorn these semantics into the keyrings syscalls would be very difficult, whereas the ioctls make things much easier. However, to reuse code the implementation still uses the keyrings service internally. Thus we get lockless RCU-mode key lookups without having to re-implement it, and the keys automatically show up in /proc/keys for debugging purposes. References: [1] https://github.com/google/fscrypt [2] https://goo.gl/55cCrI#heading=h.vf09isp98isb [3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939 [4] https://github.com/google/fscrypt/issues/116 [5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715 [6] https://github.com/google/fscrypt/issues/128 [7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-13fscrypt: use FSCRYPT_* definitions, not FS_*Eric Biggers1-0/+2
Update fs/crypto/ to use the new names for the UAPI constants rather than the old names, then make the old definitions conditional on !__KERNEL__. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-13fscrypt: use FSCRYPT_ prefix for uapi constantsEric Biggers1-23/+42
Prefix all filesystem encryption UAPI constants except the ioctl numbers with "FSCRYPT_" rather than with "FS_". This namespaces the constants more appropriately and makes it clear that they are related specifically to the filesystem encryption feature, and to the 'fscrypt_*' structures. With some of the old names like "FS_POLICY_FLAGS_VALID", it was not immediately clear that the constant had anything to do with encryption. This is also useful because we'll be adding more encryption-related constants, e.g. for the policy version, and we'd otherwise have to choose whether to use unclear names like FS_POLICY_V1 or inconsistent names like FS_ENCRYPTION_POLICY_V1. For source compatibility with existing userspace programs, keep the old names defined as aliases to the new names. Finally, as long as new names are being defined anyway, I skipped defining new names for the fscrypt mode numbers that aren't actually used: INVALID (0), AES_256_GCM (2), AES_256_CBC (3), SPECK128_256_XTS (7), and SPECK128_256_CTS (8). Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-13fs, fscrypt: move uapi definitions to new header <linux/fscrypt.h>Eric Biggers1-0/+61
More fscrypt definitions are being added, and we shouldn't use a disproportionate amount of space in <linux/fs.h> for fscrypt stuff. So move the fscrypt definitions to a new header <linux/fscrypt.h>. For source compatibility with existing userspace programs, <linux/fs.h> still includes the new header. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>