| Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit ccde2ac757c713535b224233a296de40efe5212d ]
Under some circumstances, netfs_perform_write() doesn't correctly
manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing
to a group and pointing to a netfs_folio struct, leading to potential
multiple attachments of private data with associated folio ref leaks and
also leaks of netfs_folio structs or netfs_group refs.
Fix this by consolidating the place at which a folio is marked uptodate in
one place and having that look at what's attached to folio->private and
decide how to clean it up and then set the new group. Also, the content
shouldn't be flushed if group is NULL, even if a group is specified in the
netfs_group parameter, as that would be the case for a new folio. A
filesystem should always specify netfs_group or never specify netfs_group.
The Sashiko auto-review tool noted that it was theoretically possible that
the fpos >= ctx->zero_point section might leak if it modified a streaming
write folio. This is unlikely, but with a network filesystem, third party
changes can happen. It also pointed out that __netfs_set_group() would
leak if called multiple times on the same folio from the "whole folio
modify section".
Fixes: 8f52de0077ba ("netfs: Reduce number of conditional branches in netfs_perform_write()")
Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-22-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b4dcf1b9455a6e52ac7478b4057dbe10359576d ]
In order to avoid reading whilst writing, netfslib will allow "streaming
writes" in which dirty data is stored directly into folios without reading
them first. Such folios are marked dirty but may not be marked uptodate.
If a folio is entirely written by a streaming write, uptodate will be set,
otherwise it will have a netfs_folio struct attached to ->private recording
the dirty region.
In the event that a partially written streaming write page is to be
overwritten entirely by a single write(), netfs_perform_write() will try to
copy over it, but doesn't discard the netfs_folio if it succeeds; further,
it doesn't correctly handle a partial copy that overwrites some of the
dirty data.
Fix this by the following:
(1) If the folio is successfully overwritten, free the netfs_folio struct
before marking the page uptodate.
(2) If the copy to the folio partially fails, but short of the dirty data,
just ignore the copy.
(3) If the copy partially fails and overwrites some of the dirty data,
accept the copy, update the netfs_folio struct to record the new data.
If the folio is now filled, free the netfs_folio and set uptodate,
otherwise return a partial write.
Found with:
fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \
/xfstest.test/junk --replay-ops=junk.fsxops
using the following as junk.fsxops:
truncate 0x0 0 0x927c0
write 0x63fb8 0x53c8 0
copy_range 0xb704 0x19b9 0x24429 0x79380
write 0x2402b 0x144a2 0x90660 *
write 0x204d5 0x140a0 0x927c0 *
copy_range 0x1f72c 0x137d0 0x7a906 0x927c0 *
read 0x00000 0x20000 0x9157c
read 0x20000 0x20000 0x9157c
read 0x40000 0x20000 0x9157c
read 0x60000 0x20000 0x9157c
read 0x7e1a0 0xcfb9 0x9157c
on cifs with the default cache option.
It shows folio 0x24 misbehaving if the FMODE_READ check is commented out in
netfs_perform_write():
if (//(file->f_mode & FMODE_READ) ||
netfs_is_cache_enabled(ctx)) {
and no fscache. This was initially found with the generic/522 xfstest.
Fixes: 8f52de0077ba ("netfs: Reduce number of conditional branches in netfs_perform_write()")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-14-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 156ac2ec2ee77c44c4eb7439d6d165247ba12247 ]
If a streaming write is made, this will leave the relevant modified folio
in a not-uptodate, but dirty state with a netfs_folio struct hung off of
folio->private indicating the dirty range. Subsequently truncating the
file such that the dirty data in the folio is removed, but the first part
of the folio theoretically remains will cause the netfs_folio struct to be
discarded... but will leave the dirty flag set.
If the folio is then read via mmap(), netfs_read_folio() will see that the
page is dirty and jump to netfs_read_gaps() to fill in the missing bits.
netfs_read_gaps(), however, expects there to be a netfs_folio struct
present and can oops because truncate removed it.
Fix this by calling folio_cancel_dirty() in netfs_invalidate_folio() in the
event that all the dirty data in the folio is erased (as nfs does).
Also add some tracepoints to log modifications to a dirty page.
This can be reproduced with something like:
dd if=/dev/zero of=/xfstest.test/foo bs=1M count=1
umount /xfstest.test
mount /xfstest.test
xfs_io -c "w 0xbbbf 0xf96c" \
-c "truncate 0xbbbf" \
-c "mmap -r 0xb000 0x11000" \
-c "mr 0xb000 0x11000" \
/xfstest.test/foo
with fscaching disabled (otherwise streaming writes are suppressed) and a
change to netfs_perform_write() to disallow streaming writes if the fd is
open O_RDWR:
if (//(file->f_mode & FMODE_READ) || <--- comment this out
netfs_is_cache_enabled(ctx)) {
It should be reproducible even without this change, but if prevents the
above trivial xfs_io command from reproducing it.
Note that the initial dd is important: the file must start out sufficiently
large that the zero-point logic doesn't just clear the gaps because it
knows there's nothing in the file to read yet. Unmounting and mounting is
needed to clear the pagecache (there are other ways to do that that may
also work).
This was initially reproduced with the generic/522 xfstest on some patches
that remove the FMODE_READ restriction.
Fixes: 9ebff83e6481 ("netfs: Prep to use folio->private for write grouping and streaming write")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-12-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c73370c677646e86fc4b1780fb07027bdf847375 ]
The trace event btrfs_sync_file() is called in an atomic context (all trace
events are) and its call to dput(), which is needed due to the call to
dget_parent(), can sleep, triggering a kernel splat.
This can be reproduced by enabling the trace event and running btrfs/056
from fstests for example. The splat shown in dmesg is the following:
[53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970
[53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io
[53.988] preempt_count: 2, expected: 0
[53.967] RCU nest depth: 0, expected: 0
[53.943] Preemption disabled at:
[53.944] [<0000000000000000>] 0x0
[54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full)
[54.070] Tainted: [W]=WARN
[54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[54.072] Call Trace:
[54.074] <TASK>
[54.076] dump_stack_lvl+0x56/0x80
[54.079] __might_resched.cold+0xd6/0x10f
[54.072] dput.part.0+0x24/0x110
[54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs]
[54.089] btrfs_sync_file+0x1ed/0x530 [btrfs]
[54.087] ? __handle_mm_fault+0x8ae/0xed0
[54.089] btrfs_do_write_iter+0x172/0x210 [btrfs]
[54.091] vfs_write+0x21f/0x450
[54.094] __x64_sys_pwrite64+0x8d/0xc0
[54.096] ? do_user_addr_fault+0x20c/0x670
[54.099] do_syscall_64+0x60/0xf20
[54.092] ? clear_bhb_loop+0x60/0xb0
[54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e
So stop using dget_parent() and dput() and access the parent dentry
directly as dentry->d_parent. This is also what ext4 is doing in
its equivalent trace event ext4_sync_file_enter().
Fixes: a85b46db143f ("btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f2e388a019e4cf83a15883a3d1f1384298e9a6aa ]
hrtimer_start() when invoked with an already armed timer traces like:
<comm>-.. [032] d.h2. 5.002263: hrtimer_cancel: hrtimer= ....
<comm>-.. [032] d.h1. 5.002263: hrtimer_start: hrtimer= ....
Which is incorrect as the timer doesn't get canceled. Just the expiry time
changes. The internal dequeue operation which is required for that is not
really interesting for trace analysis. But it makes it tedious to keep real
cancellations and the above case apart.
Remove the cancel tracing in hrtimer_start() and add a 'was_armed'
indicator to the hrtimer start tracepoint, which clearly indicates what the
state of the hrtimer is when hrtimer_start() is invoked:
<comm>-.. [032] d.h1. 6.200103: hrtimer_start: hrtimer= .... was_armed=0
<comm>-.. [032] d.h1. 6.200558: hrtimer_start: hrtimer= .... was_armed=1
Fixes: c6a2a1770245 ("hrtimer: Add tracepoint for hrtimers")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260224163430.208491877@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 24481a7f573305706054c59e275371f8d0fe919f upstream.
The security operations that verify the RESPONSE packets decrypt bits of it
in place - however, the sk_buff may be shared with a packet sniffer, which
would lead to the sniffer seeing an apparently corrupt packet (actually
decrypted).
Fix this by handing a copy of the packet off to the specific security
handler if the packet was cloned.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Closes: https://sashiko.dev/#/patchset/20260408121252.2249051-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260422161438.2593376-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Readd rxrpc_skb_put_response_copy which missed in bf20f46d94f1 in v6.12.86]
Stable-dep-of: aa54b1d27fe0 ("rxrpc: Also unshare DATA/RESPONSE packets when
paged frags are present")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f2740150f904bfa60e4bad74d65add3ccb5e7f8 ]
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer.
Fixes: 2d1faf7a0ca3 ("rxrpc: Simplify skbuff accounting in receive path")
Closes: https://sashiko.dev/#/patchset/20260408121252.2249051-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260422161438.2593376-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ adapted to per-skb rxrpc_input_call_event() signature ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0422e7a4883f25101903f3e8105c0808aa5f4ce9 upstream.
If a RESPONSE packet gets a temporary failure during processing, it may end
up in a partially decrypted state - and then get requeued for a retry.
Fix this by just discarding the packet; we will send another CHALLENGE
packet and thereby elicit a further response. Similarly, discard an
incoming CHALLENGE packet if we get an error whilst generating a RESPONSE;
the server will send another CHALLENGE.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Closes: https://sashiko.dev/#/patchset/20260422161438.2593376-4-dhowells@redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260423200909.3049438-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit def304aae2edf321d2671fd6ca766a93c21f877e upstream.
Fix handling of a packet with a misaligned crypto length. Also handle
non-ENOMEM errors from decryption by aborting. Further, remove the
WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can
still be emitted).
Fixes: f93af41b9f5f ("rxrpc: Fix missing error checks for rxkad encryption/decryption failure")
Closes: https://sashiko.dev/#/patchset/20260408121252.2249051-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260422161438.2593376-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
btrfs_sync_file()
[ Upstream commit a85b46db143fda5869e7d8df8f258ccef5fa1719 ]
If overlay is used on top of btrfs, dentry->d_sb translates to overlay's
super block and fsid assignment will lead to a crash.
Use file_inode(file)->i_sb to always get btrfs_sb.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 146d4ab94cf129ee06cd467cb5c71368a6b5bad6 upstream.
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs.
Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing")
Closes: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2c28769a51deb6022d7fbd499987e237a01dd63a ]
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also.
Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Faith <faith@zellic.io>
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
cc: Nir Ohfeld <niro@wiz.io>
cc: Willy Tarreau <w@1wt.eu>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/95163.1768428203@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Use spin_unlock instead of spin_unlock_irq to maintain context consistency.]
Signed-off-by: Robert Garcia <rob_garcia@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 079c24d5690262e83ee476e2a548e416f3237511 upstream.
The rss_stat trace event allows userspace tools, like Perfetto [1], to
inspect per-process RSS metric changes over time.
The curr field was introduced to rss_stat in commit e4dcad204d3a
("rss_stat: add support to detect RSS updates of external mm"). Its
intent is to indicate whether the RSS update is for the mm_struct of the
current execution context; and is set to false when operating on a remote
mm_struct (e.g., via kswapd or a direct reclaimer).
However, an issue arises when a kernel thread temporarily adopts a user
process's mm_struct. Kernel threads do not have their own mm_struct and
normally have current->mm set to NULL. To operate on user memory, they
can "borrow" a memory context using kthread_use_mm(), which sets
current->mm to the user process's mm.
This can be observed, for example, in the USB Function Filesystem (FFS)
driver. The ffs_user_copy_worker() handles AIO completions and uses
kthread_use_mm() to copy data to a user-space buffer. If a page fault
occurs during this copy, the fault handler executes in the kthread's
context.
At this point, current is the kthread, but current->mm points to the user
process's mm. Since the rss_stat event (from the page fault) is for that
same mm, the condition current->mm == mm becomes true, causing curr to be
incorrectly set to true when the trace event is emitted.
This is misleading because it suggests the mm belongs to the kthread,
confusing userspace tools that track per-process RSS changes and
corrupting their mm_id-to-process association.
Fix this by ensuring curr is always false when the trace event is emitted
from a kthread context by checking for the PF_KTHREAD flag.
Link: https://lkml.kernel.org/r/20260219233708.1971199-1-kaleshsingh@google.com
Link: https://perfetto.dev/ [1]
Fixes: e4dcad204d3a ("rss_stat: add support to detect RSS updates of external mm")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: "David Hildenbrand (Arm)" <david@kernel.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit daafcc0ef0b358d9d622b6e3b7c43767aa3814ee ]
The dma_map_sg tracepoint can trigger a perf buffer overflow when
tracing large scatter-gather lists. With devices like virtio-gpu
creating large DRM buffers, nents can exceed 1000 entries, resulting
in:
phys_addrs: 1000 * 8 bytes = 8,000 bytes
dma_addrs: 1000 * 8 bytes = 8,000 bytes
lengths: 1000 * 4 bytes = 4,000 bytes
Total: ~20,000 bytes
This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing:
WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405
perf buffer not large enough, wanted 24620, have 8192
Cap all three dynamic arrays at 128 entries using min() in the array
size calculation. This ensures arrays are only as large as needed
(up to the cap), avoiding unnecessary memory allocation for small
operations while preventing overflow for large ones.
The tracepoint now records the full nents/ents counts and a truncated
flag so users can see when data has been capped.
Changes in v2:
- Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing
instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from
Steven Rostedt)
- This allocates only what's needed up to the cap, avoiding waste
for small operations
Reported-by: syzbot+28cea38c382fd15e751a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=28cea38c382fd15e751a
Tested-by: syzbot+28cea38c382fd15e751a@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Reviwed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260130155215.69737-1-kartikey406@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f157dd661339fc6f5f2b574fe2429c43bd309534 ]
When evicting an inode the first thing we do is to setup tracing for it,
which implies fetching the root's id. But in btrfs_evict_inode() the
root might be NULL, as implied in the next check that we do in
btrfs_evict_inode().
Hence, we either should set the ->root_objectid to 0 in case the root is
NULL, or we move tracing setup after checking that the root is not
NULL. Setting the rootid to 0 at least gives us the possibility to trace
this call even in the case when the root is NULL, so that's the solution
taken here.
Fixes: 1abe9b8a138c ("Btrfs: add initial tracepoint support for btrfs")
Reported-by: syzbot+d991fea1b4b23b1f6bf8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d991fea1b4b23b1f6bf8
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f987c099d22c3b8c7d94fd13f957792e46f79c9 ]
Instead of open coding btrfs_root_id() to get the ID of a root, use the
helper in the trace points, which also makes the code less verbose.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: f157dd661339 ("btrfs: fix NULL dereference on root when tracing inode eviction")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c6c209ceb87f64a6ceebe61761951dcbbf4a0baa upstream.
I haven't found an NFSERR_EAGAIN in RFCs 1094, 1813, 7530, or 8881.
None of these RFCs have an NFS status code that match the numeric
value "11".
Based on the meaning of the EAGAIN errno, I presume the use of this
status in NFSD means NFS4ERR_DELAY. So replace the one usage of
nfserr_eagain, and remove it from NFSD's NFS status conversion
tables.
As far as I can tell, NFSERR_EAGAIN has existed since the pre-git
era, but was not actually used by any code until commit f4e44b393389
("NFSD: delay unmount source's export after inter-server copy
completed."), at which time it become possible for NFSD to return
a status code of 11 (which is not valid NFS protocol).
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 16abbabc004bedeeaa702e11913da9d4fa70e63a upstream.
Set __entry->dir to the actual "dir" parameter of all trace events
in dma_alloc_class. This struct member was left uninitialized by
mistake.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Fixes: 3afff779a725 ("dma-mapping: trace dma_alloc/free direction")
Cc: stable@vger.kernel.org
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251001061028.412258-1-ptesarik@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c593b9d6c446510684da400833f9d632651942f0 ]
Show the FL_RECLAIM flag symbolically in tracepoints.
Fixes: bb0a55bb7148 ("nfs: don't allow reexport reclaims")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/20250903-filelock-v1-1-f2926902962d@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68b6dbf1f441c4eba3b8511728a41cf9b01dca35 ]
It can be surprising to the user if DMA functions are only traced on
success. On failure, it can be unclear what the source of the problem
is. Fix this by tracing all functions even when they fail. Cases where
we BUG/WARN are skipped, since those should be sufficiently noisy
already.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: 7e2368a21741 ("dma-debug: don't enforce dma mapping check on noncoherent allocations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4484ab86ee00f2d9236e2851621ea02c105f4cc ]
In some cases, we use trace_dma_map to trace dma_alloc* functions. This
generally follows dma_debug. However, this does not record all of the
relevant information for allocations, such as GFP flags. Create new
dma_alloc tracepoints for these functions. Note that while
dma_alloc_noncontiguous may allocate discontiguous pages (from the CPU's
point of view), the device will only see one contiguous mapping.
Therefore, we just need to trace dma_addr and size.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: 7e2368a21741 ("dma-debug: don't enforce dma mapping check on noncoherent allocations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3afff779a725cba914e6caba360b696ae6f90249 ]
In preparation for using these tracepoints in a few more places, trace
the DMA direction as well. For coherent allocations this is always
bidirectional.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: 7e2368a21741 ("dma-debug: don't enforce dma mapping check on noncoherent allocations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43cf0e05089afe23dac74fa6e1e109d49f2903c4 ]
The events hugepage_set_pmd, hugepage_set_pud, hugepage_update_pmd and
hugepage_update_pud are only called when CONFIG_PPC_BOOK3S_64 is defined.
As each event can take up to 5K regardless if they are used or not, it's
best not to define them when they are not used. Add #ifdef around these
events when they are not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/20250612101259.0ad43e48@batman.local.home
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 962fb1f651c2cf2083e0c3ef53ba69e3b96d3fbc ]
If a call receives an event (such as incoming data), the call gets placed
on the socket's queue and a thread in recvmsg can be awakened to go and
process it. Once the thread has picked up the call off of the queue,
further events will cause it to be requeued, and once the socket lock is
dropped (recvmsg uses call->user_mutex to allow the socket to be used in
parallel), a second thread can come in and its recvmsg can pop the call off
the socket queue again.
In such a case, the first thread will be receiving stuff from the call and
the second thread will be blocked on call->user_mutex. The first thread
can, at this point, process both the event that it picked call for and the
event that the second thread picked the call for and may see the call
terminate - in which case the call will be "released", decoupling the call
from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control
message).
The first thread will return okay, but then the second thread will wake up
holding the user_mutex and, if it sees that the call has been released by
the first thread, it will BUG thusly:
kernel BUG at net/rxrpc/recvmsg.c:474!
Fix this by just dequeuing the call and ignoring it if it is seen to be
already released. We can't tell userspace about it anyway as the user call
ID has become stale.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250717074350.3767366-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4eb56b0761e75034dd35067a81da4c280c178262 ]
- trace_erofs_readpages => trace_erofs_readahead;
- Rename a redundant statement `nrpages = readahead_count(rac);`;
- Move the tracepoint to the beginning of z_erofs_readahead().
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20250514120820.2739288-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Stable-dep-of: d53238b614e0 ("erofs: fix to add missing tracepoint in erofs_readahead()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 30b58444807c93bffeaba7d776110f2a909d2f9a upstream.
The trace event `erofs_destroy_inode` was added but remains unused. This
unused event contributes approximately 5KB to the kernel module size.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/r/20250612224906.15000244@batman.local.home
Fixes: 13f06f48f7bf ("staging: erofs: support tracepoint")
Cc: stable@vger.kernel.org
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250617054056.3232365-1-hsiangkao@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bc7e0975093567f51be8e1bdf4aa5900a3cf0b1e ]
btrfs_prelim_ref() calls the old and new reference variables in the
incorrect order. This causes a NULL pointer dereference because oldref
is passed as NULL to trace_btrfs_prelim_ref_insert().
Note, trace_btrfs_prelim_ref_insert() is being called with newref as
oldref (and oldref as NULL) on purpose in order to print out
the values of newref.
To reproduce:
echo 1 > /sys/kernel/debug/tracing/events/btrfs/btrfs_prelim_ref_insert/enable
Perform some writeback operations.
Backtrace:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 115949067 P4D 115949067 PUD 11594a067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 1188 Comm: fsstress Not tainted 6.15.0-rc2-tester+ #47 PREEMPT(voluntary) 7ca2cef72d5e9c600f0c7718adb6462de8149622
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
RIP: 0010:trace_event_raw_event_btrfs__prelim_ref+0x72/0x130
Code: e8 43 81 9f ff 48 85 c0 74 78 4d 85 e4 0f 84 8f 00 00 00 49 8b 94 24 c0 06 00 00 48 8b 0a 48 89 48 08 48 8b 52 08 48 89 50 10 <49> 8b 55 18 48 89 50 18 49 8b 55 20 48 89 50 20 41 0f b6 55 28 88
RSP: 0018:ffffce44820077a0 EFLAGS: 00010286
RAX: ffff8c6b403f9014 RBX: ffff8c6b55825730 RCX: 304994edf9cf506b
RDX: d8b11eb7f0fdb699 RSI: ffff8c6b403f9010 RDI: ffff8c6b403f9010
RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000010
R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8c6b4e8fb000
R13: 0000000000000000 R14: ffffce44820077a8 R15: ffff8c6b4abd1540
FS: 00007f4dc6813740(0000) GS:ffff8c6c1d378000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 000000010eb42000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
prelim_ref_insert+0x1c1/0x270
find_parent_nodes+0x12a6/0x1ee0
? __entry_text_end+0x101f06/0x101f09
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
btrfs_is_data_extent_shared+0x167/0x640
? fiemap_process_hole+0xd0/0x2c0
extent_fiemap+0xa5c/0xbc0
? __entry_text_end+0x101f05/0x101f09
btrfs_fiemap+0x7e/0xd0
do_vfs_ioctl+0x425/0x9d0
__x64_sys_ioctl+0x75/0xc0
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6975c1a486a40446b5bc77a89d9c520f8296fd08 ]
The request ioprio is only initialized from the first attached bio,
so requests without a bio already never set it. Directly use the
bio field instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241112170050.1612998-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: fc0e982b8a3a ("block: make sure ->nr_integrity_segments is cloned in blk_rq_prep_clone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e52750fb1458ae9ea5860a08ed7a149185bc5b97 ]
When printing a dynamic array in a trace event, the method is rather ugly.
It has the format of:
__print_array(__get_dynamic_array(array),
__get_dynmaic_array_len(array) / el_size, el_size)
Since dynamic arrays are known to the tracing infrastructure, create a
helper macro that does the above for you.
__print_dynamic_array(array, el_size)
Which would expand to the same output.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/r/20241022194158.110073-3-avadhut.naik@amd.com
Stable-dep-of: ea8d7647f9dd ("tracing: Verify event formats that have "%*p.."")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f0fc3374f3345ff1d150c5c56ac5016e5d3826a ]
Give an afs_server object a ref on the afs_cell object it points to so that
the cell doesn't get deleted before the server record.
Whilst this is circular (cell -> vol -> server_list -> server -> cell), the
ref only pins the memory, not the lifetime as that's controlled by the
activity counter. When the volume's activity counter reaches 0, it
detaches from the cell and discards its server list; when a cell's activity
counter reaches 0, it discards its root volume. At that point, the
circularity is cut.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-6-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5bbd6e863b15a85221e49b9bdb2d5d8f0bb91f3d ]
If rpc_signal_task() is called while a task is in an rpc_call_done()
callback function, and the latter calls rpc_restart_call(), the task can
end up looping due to the RPC_TASK_SIGNALLED flag being set without the
tk_rpc_status being set.
Removing the redundant mechanism for signalling the task fixes the
looping behaviour.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: 39494194f93b ("SUNRPC: Fix races with rpc_killall_tasks()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4241a702e0d0c2ca9364cfac08dbf134264962de ]
The rxrpc_connection attend queue is never used because conn::attend_link
is never initialised and so is always NULL'd out and thus always appears to
be busy. This requires the following fix:
(1) Fix this the attend queue problem by initialising conn::attend_link.
And, consequently, two further fixes for things masked by the above bug:
(2) Fix rxrpc_input_conn_event() to handle being invoked with a NULL
sk_buff pointer - something that can now happen with the above change.
(3) Fix the RXRPC_SKB_MARK_SERVICE_CONN_SECURED message to carry a pointer
to the connection and a ref on it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Fixes: f2cce89a074e ("rxrpc: Implement a mechanism to send an event notification to a connection")
Link: https://patch.msgid.link/20250203110307.7265-3-dhowells@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e56ebde245e4799ce74d38419426f2a80d39950 ]
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9750be93b2be12b6d92323b97d7c055099d279e6 ]
If we manage to begin an async call, but fail to transmit any data on it
due to a signal, we then abort it which causes a race between the
notification of call completion from rxrpc and our attempt to cancel the
notification. The notification will be necessary, however, for async
FetchData to terminate the netfs subrequest.
However, since we get a notification from rxrpc upon completion of a call
(aborted or otherwise), we can just leave it to that.
This leads to calls not getting cleaned up, but appearing in
/proc/net/rxrpc/calls as being aborted with code 6.
Fix this by making the "error_do_abort:" case of afs_make_call() abort the
call and then abandon it to the notification handler.
Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-25-dhowells@redhat.com
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 60295b944ff6805e677c48ae4178532b207d43be upstream.
Tracing tools like perf and trace-cmd read the /sys/kernel/tracing/events/*/*/format
files to know how to parse the data and also how to print it. For the
"print fmt" portion of that file, if anything uses an enum that is not
exported to the tracing system, user space will not be able to parse it.
The GFP flags use to be defines, and defines get translated in the print
fmt sections. But now they are converted to use enums, which is not.
The mm_page_alloc trace event format use to have:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (((struct page *)vmemmap_base) + (REC->pfn)) : ((void
*)0), REC->pfn != -1UL ? REC->pfn : 0, REC->order, REC->migratetype,
(REC->gfp_flags) ? __print_flags(REC->gfp_flags, "|", {( unsigned
long)(((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) |
(( gfp_t)0x40000u) | (( gfp_t)0x80000u) | (( gfp_t)0x2000u)) & ~((
gfp_t)(0x400u|0x800u))) | (( gfp_t)0x400u)), "GFP_TRANSHUGE"}, {( unsigned
long)((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) ...
Where the GFP values are shown and not their names. But after the GFP
flags were converted to use enums, it has:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (vmemmap + (REC->pfn)) : ((void *)0), REC->pfn != -1UL
? REC->pfn : 0, REC->order, REC->migratetype, (REC->gfp_flags) ?
__print_flags(REC->gfp_flags, "|", {( unsigned long)((((((((
gfp_t)(((((1UL))) << (___GFP_DIRECT_RECLAIM_BIT))|((((1UL))) <<
(___GFP_KSWAPD_RECLAIM_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_IO_BIT)))
| (( gfp_t)((((1UL))) << (___GFP_FS_BIT))) | (( gfp_t)((((1UL))) <<
(___GFP_HARDWALL_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_HIGHMEM_BIT))))
| (( gfp_t)((((1UL))) << (___GFP_MOVABLE_BIT))) | (( gfp_t)0)) | ((
gfp_t)((((1UL))) << (___GFP_COMP_BIT))) ...
Where the enums names like ___GFP_KSWAPD_RECLAIM_BIT are shown and not their
values. User space has no way to convert these names to their values and
the output will fail to parse. What is shown is now:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x1d1ac1 order=0 migratetype=1 gfp_flags=0x140cca
The TRACE_DEFINE_ENUM() macro was created to handle enums in the print fmt
files. This causes them to be replaced at boot up with the numbers, so
that user space tooling can parse it. By using this macro, the output is
back to the human readable:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x122233 order=0 migratetype=1 gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250116214438.749504792@goodmis.org
Reported-by: Michael Petlan <mpetlan@redhat.com>
Closes: https://lore.kernel.org/all/87be5f7c-1a0-dad-daa0-54e342efaea7@redhat.com/
Fixes: 772dd0342727c ("mm: enumerate all gfp flags")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 13d750c2c03e9861e15268574ed2c239cca9c9d5 ]
In preparation for allowing system call enter/exit instrumentation to
handle page faults, make sure that ftrace can handle this change by
explicitly disabling preemption within the ftrace system call tracepoint
probes to respect the current expectations within ftrace ring buffer
code.
This change does not yet allow ftrace to take page faults per se within
its probe, but allows its existing probes to adapt to the upcoming
change.
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: https://lore.kernel.org/20241009010718.2050182-3-mathieu.desnoyers@efficios.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6535b8669c1a74078098517174e53fc907ce9d56 upstream.
Since the order of the scheme_idx and target_idx arguments in TP_ARGS is
reversed, they are stored in the trace record in reverse.
Link: https://lkml.kernel.org/r/20241115182023.43118-1-sj@kernel.org
Link: https://patch.msgid.link/20241112154828.40307-1-akinobu.mita@gmail.com
Fixes: c603c630b509 ("mm/damon/core: add a tracepoint for damos apply target regions")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here. No
known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed in a
refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
|
|
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes: 9d35d880e0e4 ("rxrpc: Move client call connection to the I/O thread")
Link: https://patch.msgid.link/726660.1730898202@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull filesystem fixes from Christian Brauner:
"VFS:
- Fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP=y is set
- Add a get_tree_bdev_flags() helper that allows to modify e.g.,
whether errors are logged into the filesystem context during
superblock creation. This is used by erofs to fix a userspace
regression where an error is currently logged when its used on a
regular file which is an new allowed mode in erofs.
netfs:
- Fix the sysfs debug path in the documentation.
- Fix iov_iter_get_pages*() for folio queues by skipping the page
extracation if we're at the end of a folio.
afs:
- Fix moving subdirectories to different parent directory.
autofs:
- Fix handling of AUTOFS_DEV_IOCTL_TIMEOUT_CMD ioctl in
validate_dev_ioctl(). The actual ioctl number, not the ioctl
command needs to be checked for autofs"
* tag 'vfs-6.12-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP
autofs: fix thinko in validate_dev_ioctl()
iov_iter: Fix iov_iter_get_pages*() for folio_queue
afs: Fix missing subdir edit when renamed between parent dirs
doc: correcting the debug path for cachefiles
erofs: use get_tree_bdev_flags() to avoid misleading messages
fs/super.c: introduce get_tree_bdev_flags()
|
|
When rename moves an AFS subdirectory between parent directories, the
subdir also needs a bit of editing: the ".." entry needs updating to point
to the new parent (though I don't make use of the info) and the DV needs
incrementing by 1 to reflect the change of content. The server also sends
a callback break notification on the subdirectory if we have one, but we
can take care of recovering the promise next time we access the subdir.
This can be triggered by something like:
mount -t afs %example.com:xfstest.test20 /xfstest.test/
mkdir /xfstest.test/{aaa,bbb,aaa/ccc}
touch /xfstest.test/bbb/ccc/d
mv /xfstest.test/{aaa/ccc,bbb/ccc}
touch /xfstest.test/bbb/ccc/e
When the pathwalk for the second touch hits "ccc", kafs spots that the DV
is incorrect and downloads it again (so the fix is not critical).
Fix this, if the rename target is a directory and the old and new
parents are different, by:
(1) Incrementing the DV number of the target locally.
(2) Editing the ".." entry in the target to refer to its new parent's
vnode ID and uniquifier.
Link: https://lore.kernel.org/r/3340431.1729680010@warthog.procyon.org.uk
Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
cc: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix a lock recursion in afs_wake_up_async_call() on ->notify_lock
netfs:
- Drop the references to a folio immediately after the folio has been
extracted to prevent races with future I/O collection
- Fix a documenation build error
- Downgrade the i_rwsem for buffered writes to fix a cifs reported
performance regression when switching to netfslib
vfs:
- Explicitly return -E2BIG from openat2() if the specified size is
unexpectedly large. This aligns openat2() with other extensible
struct based system calls
- When copying a mount namespace ensure that we only try to remove
the new copy from the mount namespace rbtree if it has already been
added to it
nilfs:
- Clear the buffer delay flag when clearing the buffer state clags
when a buffer head is discarded to prevent a kernel OOPs
ocfs2:
- Fix an unitialized value warning in ocfs2_setattr()
proc:
- Fix a kernel doc warning"
* tag 'vfs-6.12-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
proc: Fix W=1 build kernel-doc warning
afs: Fix lock recursion
fs: Fix uninitialized value issue in from_kuid and from_kgid
fs: don't try and remove empty rbtree node
netfs: Downgrade i_rwsem for a buffered write
nilfs2: fix kernel bug due to missing clearing of buffer delay flag
openat2: explicitly return -E2BIG for (usize > PAGE_SIZE)
netfs: fix documentation build error
netfs: In readahead, put the folio refs as soon extracted
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"Just another small tracing fix from Sean"
* tag 'dma-mapping-6.12-2024-10-20' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix tracing dma_alloc/free with vmalloc'd memory
|
|
Not all virtual addresses have physical addresses, such as if they were
vmalloc'd. Just trace the virtual address instead of trying to trace a
physical address. This aligns with the API, and is good enough to
associate dma_alloc with dma_free.
Fixes: 038eb433dc14 ("dma-mapping: add tracing for dma-mapping API calls")
Reported-by: syzbot+b4bfacdec173efaa8567@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/670ebde5.050a0220.d9b66.0154.GAE@google.com/
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The "addr" and "is_shmem" arguments have different order in TP_PROTO and
TP_ARGS. This resulted in the incorrect trace result:
text-hugepage-644429 [276] 392092.878683: mm_khugepaged_collapse_file:
mm=0xffff20025d52c440, hpage_pfn=0x200678c00, index=512, addr=1, is_shmem=0,
filename=text-hugepage, nr=512, result=failed
The value of "addr" is wrong because it was treated as bool value, the
type of is_shmem.
Fix the order in TP_PROTO to keep "addr" is before "is_shmem" since the
original patch review suggested this order to achieve best packing.
And use "lx" for "addr" instead of "ld" in TP_printk because address is
typically shown in hex.
After the fix, the trace result looks correct:
text-hugepage-7291 [004] 128.627251: mm_khugepaged_collapse_file:
mm=0xffff0001328f9500, hpage_pfn=0x20016ea00, index=512, addr=0x400000,
is_shmem=0, filename=text-hugepage, nr=512, result=failed
Link: https://lkml.kernel.org/r/20241012011702.1084846-1-yang@os.amperecomputing.com
Fixes: 4c9473e87e75 ("mm/khugepaged: add tracepoint to collapse_file()")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Cc: Gautam Menghani <gautammenghani201@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org> [6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
netfslib currently defers dropping the ref on the folios it obtains during
readahead to after it has started I/O on the basis that we can do it whilst
we wait for the I/O to complete, but this runs the risk of the I/O
collection racing with this in future.
Furthermore, Matthew Wilcox strongly suggests that the refs should be
dropped immediately, as readahead_folio() does (netfslib is using
__readahead_batch() which doesn't drop the refs).
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/3771538.1728052438@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in incremental send, fix invalid clone operation for file that got
its size decreased
- fix __counted_by() annotation of send path cache entries, we do not
store the terminating NUL
- fix a longstanding bug in relocation (and quite hard to hit by
chance), drop back reference cache that can get out of sync after
transaction commit
- wait for fixup worker kthread before finishing umount
- add missing raid-stripe-tree extent for NOCOW files, zoned mode
cannot have NOCOW files but RST is meant to be a standalone feature
- handle transaction start error during relocation, avoid potential
NULL pointer dereference of relocation control structure (reported by
syzbot)
- disable module-wide rate limiting of debug level messages
- minor fix to tracepoint definition (reported by checkpatch.pl)
* tag 'for-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: disable rate limiting when debug enabled
btrfs: wait for fixup workers before stopping cleaner kthread during umount
btrfs: fix a NULL pointer dereference when failed to start a new trasacntion
btrfs: send: fix invalid clone operation for file that got its size decreased
btrfs: tracepoints: end assignment with semicolon at btrfs_qgroup_extent event class
btrfs: drop the backref cache during relocation if we commit
btrfs: also add stripe entries for NOCOW writes
btrfs: send: fix buffer overflow detection when copying path to cache entry
|
|
event class
While running checkpatch.pl against a patch that modifies the
btrfs_qgroup_extent event class, it complained about using a comma instead
of a semicolon:
$ ./scripts/checkpatch.pl qgroups/0003-btrfs-qgroups-remove-bytenr-field-from-struct-btrfs_.patch
WARNING: Possible comma where semicolon could be used
#215: FILE: include/trace/events/btrfs.h:1720:
+ __entry->bytenr = bytenr,
__entry->num_bytes = rec->num_bytes;
total: 0 errors, 1 warnings, 184 lines checked
So replace the comma with a semicolon to silence checkpatch and possibly
other tools. It also makes the code consistent with the rest.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix setting of the server responding flag
- Remove unused struct afs_address_list and afs_put_address_list()
function
- Fix infinite loop because of unresponsive servers
- Ensure that afs_retry_request() function is correctly added to the
afs_req_ops netfs operations table
netfs:
- Fix netfs_folio tracepoint handling to handle NULL mappings
- Add a missing folio_queue API documentation
- Ensure that netfs_write_folio() correctly advances the iterator via
iov_iter_advance()
- Fix a dentry leak during concurrent cull and cookie lookup
operations in cachefiles
pidfs:
- Correctly handle accessing another task's pid namespace"
* tag 'vfs-6.12-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix the netfs_folio tracepoint to handle NULL mapping
netfs: Add folio_queue API documentation
netfs: Advance iterator correctly rather than jumping it
afs: Fix the setting of the server responding flag
afs: Remove unused struct and function prototype
afs: Fix possible infinite loop with unresponsive servers
pidfs: check for valid pid namespace
afs: Fix missing wire-up of afs_retry_request()
cachefiles: fix dentry leak in cachefiles_open_file()
|
|
Fix the netfs_folio tracepoint to handle folios that have a NULL mapping
pointer. In such a case, just substitute a zero inode number.
Fixes: c38f4e96e605 ("netfs: Provide func to copy data to pagecache for buffered write")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/2917423.1727697556@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|