summaryrefslogtreecommitdiff
path: root/include/sound
AgeCommit message (Collapse)AuthorFilesLines
2011-07-30Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits) [media] ir-mce_kbd-decoder: include module.h for its facilities [media] ov5642: include module.h for its facilities [media] em28xx: Fix DVB-C maxsize for em2884 [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz [media] v4l: mt9v032: Fix Bayer pattern [media] V4L: mt9m111: rewrite set_pixfmt [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear [media] V4L: initial driver for ov5642 CMOS sensor [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails [media] V4L: soc-camera: remove soc-camera bus and devices on it [media] V4L: soc-camera: un-export the soc-camera bus [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier [media] V4L: add media bus configuration subdev operations [media] V4L: soc-camera: group struct field initialisations together [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks [media] V4L: pxa-camera: switch to using standard PM hooks [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param [media] Don't OOPS if videobuf_dvb_get_frontend return NULL [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision [media] omap3isp: Support configurable HS/VS polarities ... Fix up conflicts: - arch/arm/mach-omap2/board-rx51-peripherals.c: cleanup regulator supply definitions in mach-omap2 vs OMAP3: RX-51: define vdds_csib regulator supply - drivers/staging/tm6000/tm6000-alsa.c (trivial)
2011-07-28[media] tea575x: allow multiple opensOndrej Zary1-1/+1
Change locking to allow tea575x-radio device to be opened multiple times. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] tea575x: convert to control frameworkOndrej Zary1-2/+4
Convert tea575x-tuner to use the new V4L2 control framework. Also add ext_init() callback that can be used by a card driver for additional initialization right before registering the video device (for SF16-FMR2). Also embed struct video_device to struct snd_tea575x to simplify the code. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27Merge branch 'for-linus' of ↵Linus Torvalds3-12/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (22 commits) ALSA: hda - Cirrus Logic CS421x support ALSA: Make pcm.h self-contained ALSA: hda - Allow codec-specific set_power_state ops ALSA: hda - Add post_suspend patch ops ALSA: hda - Make CONFIG_SND_HDA_POWER_SAVE depending on CONFIG_PM ALSA: hda - Make sure mute led reflects master mute state ALSA: hda - Fix invalid mute led state on resume of IDT codecs ASoC: Revert "ASoC: SAMSUNG: Add I2S0 internal dma driver" ALSA: hda - Add support of the 4 internal speakers on certain HP laptops ALSA: Make snd_pcm_debug_name usable outside pcm_lib ALSA: hda - Fix DAC filling for multi-connection pins in Realtek parser ASoC: dapm - Add methods to retrieve snd_card and soc_card from dapm context. ASoC: SAMSUNG: Add I2S0 internal dma driver ASoC: SAMSUNG: Modify I2S driver to support idma ASoC: davinci: add missing break statement ASoC: davinci: fix codec start and stop functions ASoC: dapm - add DAPM macro for external enum widgets ASoC: Acknowledge WM8962 interrupts before acting on them ASoC: sgtl5000: guide user when regulator support is needed ASoC: sgtl5000: refactor registering internal ldo ...
2011-07-26Merge branch 'fix/asoc' into for-linusTakashi Iwai1-0/+6
2011-07-26ALSA: Make pcm.h self-containedTakashi Iwai2-12/+27
Move the macros depending on snd_mask_min() and co out of pcm.h into pcm_params.h. Otherwise using some params_*() macros will give comiple errors without inclusion of pcm_params.h. Also use hw_param_interval_c() and hw_param_mask_c() for const pointer. Reported-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-24ALSA: Make snd_pcm_debug_name usable outside pcm_libEliot Blennerhassett1-0/+12
Formatting a PCM name is useful for module debug too. Add snd_prefix when making function public. [minor coding-style fixes by tiwai] Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-22Merge branch 'topic/misc' into for-linusTakashi Iwai1-1/+3
2011-07-22Merge branch 'topic/asoc' into for-linusTakashi Iwai3-7/+63
2011-07-21treewide: fix potentially dangerous trailing ';' in #defined values/expressionsPhil Carmody1-1/+1
All these are instances of #define NAME value; or #define NAME(params_opt) value; These of course fail to build when used in contexts like if(foo $OP NAME) while(bar $OP NAME) and may silently generate the wrong code in contexts such as foo = NAME + 1; /* foo = value; + 1; */ bar = NAME - 1; /* bar = value; - 1; */ baz = NAME & quux; /* baz = value; & quux; */ Reported on comp.lang.c, Message-ID: <ab0d55fe-25e5-482b-811e-c475aa6065c3@c29g2000yqd.googlegroups.com> Initial analysis of the dangers provided by Keith Thompson in that thread. There are many more instances of more complicated macros having unnecessary trailing semicolons, but this pile seems to be all of the cases of simple values suffering from the problem. (Thus things that are likely to be found in one of the contexts above, more complicated ones aren't.) Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-20ASoC: dapm - add DAPM macro for external enum widgetsLiam Girdwood1-0/+6
Add a convenience macro for external enumerated widgets. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05ASoC: core - Add convenience register for platform kcontrol and DAPMLiam Girdwood1-0/+8
Allow platform probe to register platform kcontrols and DAPM just like the CODEC probe(). Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05ASoC: core - Add platform widget IOLiam Girdwood2-0/+4
Allow platform driver widgets to perform any IO required for DAPM. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05ASoC: core - Add API call to register platform kcontrols.Liam Girdwood1-0/+2
In preparation for Dynamic PCM (AKA DSP) support. Allow platform drivers to register kcontrols. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: core - Add platform read and write.Liam Girdwood1-0/+8
In preparation for ASoC Dynamic PCM (AKA DSP) support. Allow platform driver to perform IO. Intended for platform DAPM. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-30ALSA: sb16 - Fix build errors on MIPS and others with 13bit ioctl sizeTakashi Iwai1-1/+8
One of ioctl definition in sound/sb16_csp.h contains the data size over 8kB, and this causes build errors on architectures like MIPS, which define _IOC_SIZEBITS=13. For avoiding this build errors but keeping the compatibility, manually expand with _IOC() instead of using _IOW() for the problematic ioctl. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-14ALSA: rawmidi - Use workq for event handlingTakashi Iwai1-1/+3
Kill tasklet usage in rawmidi core code. Use workq for the event callback instead of tasklet (which is used only in core/seq/seq_midi.c). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-14ASoC: Fix mismerge with release branchMark Brown1-0/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-13Merge branch 'for-3.0' into for-3.1Mark Brown1-2/+1
Trival fixup for move of I/O code into separate file. Conflicts: sound/soc/soc-cache.c
2011-06-13ASoC: Remove unused and about to be broken SND_SOC_CUSTOM I/O busMark Brown1-2/+1
This will be removed in -next so let's drop it from mainline as soon as we can in order to minimise surprises. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-13ASoC: Add weak routes for sidetone style pathsMark Brown1-0/+2
Normally DAPM will power up any connected audio path. This is not ideal for sidetone paths as with sidetone paths the audio path is not wanted in itself, it is only desired if the two paths it provides a sidetone between are both active. If the sidetone path causes a power up then it can be hard to minimise pops as we first power up either the sidetone or the main output path and then power the other, with the second power up potentially introducing a DC offset. Address this by introducing the concept of a weak path. If a path is marked as weak then DAPM will ignore that path when walking the graph, though all the relevant controls are still available to the application layer to allow these paths to be configured. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-09ASoC: core - PCM mutex per rtdLiam Girdwood1-0/+8
In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-07ASoC: core - Allow components to probe/remove in sequence.Liam Girdwood2-0/+22
Some ASoC components depend on other ASoC components to provide clocks and power resources in order to probe() and vice versa for remove(). Allow components to be ordered so that components can be probed() and removed() in sequences that conform to their dependencies. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-07ASoC: core - Optimise and refactor pcm_new() to pass only rtdLiam Girdwood1-2/+1
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI. Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains card, pcm and DAI along with other members too that are useful too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-07ASoC: Add context parameter to card DAPM callbacksMark Brown1-0/+2
The card callback will get called for each DAPM context in the card so it can be useful for it to know which device is currently undergoing a transition. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-07ASoC: Specify target bias state directly as a bias stateMark Brown2-5/+5
Rather than a simple flag to say if we want the DAPM context to be at full power specify the target bias state. This should have no current effect but is a bit more direct and so makes it easier to change our decisions about the which bias state to go into in future. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-22Merge branch 'topic/asoc' into for-linusTakashi Iwai8-43/+230
2011-05-22Merge branch 'topic/misc' into for-linusTakashi Iwai2-9/+18
2011-05-20Merge branch 'for-2.6.40' of ↵Takashi Iwai2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2011-05-20ASoC: Asahi Kasei AK4641 codec driverDmitry Artamonow1-0/+26
A driver for the AK4641 codec used in iPAQ hx4700 and Glofiish M800 among others. Signed-off-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-13ALSA: tea575x: use better card and bus namesOndrej Zary1-0/+2
Provide real card and bus_info instead of hardcoded values. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13ALSA: tea575x: remove unused card from structOndrej Zary1-1/+0
struct snd_card *card is present in struct snd_tea575x but never used. Remove it. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13ALSA: tea575x: remove freq_fixup from structOndrej Zary1-1/+2
freq_fixup is a constant, no need to hold it in struct snd_tea575x and set in each driver. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-12ASoC: core - allow ASoC more flexible machine nameLiam Girdwood1-0/+2
Allow ASoC machine drivers to register a driver name and a longname. This allows user space to determine the flavour of machine driver. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-11ASoC: tpa6130a2: Update e-mail addressPeter Ujfalusi1-1/+1
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-05-11ASoC: tlv320dac33: Update e-mail addressPeter Ujfalusi1-1/+1
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-05-10ALSA: tea575x: unify read/write functionsOndrej Zary1-4/+9
Implement generic read/write functions to access TEA575x tuners. They're now implemented 4 times (once in es1968 and 3 times in fm801). This also allows mute to work on all cards. Also improve tuner detection/initialization. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-04Merge branch 'topic/asoc' of ↵Mark Brown1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.40
2011-05-03ASoC: Store a list of widgets in a DAPM mux/mixer kcontrolStephen Warren1-0/+6
A future change will allow multiple widgets to be affected by the same control. For example, a single register bit that controls separate muxes in both the L and R audio paths. This change updates the code that handles relevant controls to be able to iterate over a list of affected widgets. Note that only the put functions need significant modification to implement the iteration; the get functions do not need to iterate, nor unify the results, since all affected widgets reference the same kcontrol. When creating the list of widgets, always create a 1-sized list, since the control sharing is not implemented in this change. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03ASoC: Add w->kcontrols, and populate itStephen Warren1-0/+1
Future changes will need reference to the kcontrol created for a given kcontrol_new. Store the created kcontrol values now. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03ASoC: s/w->kcontrols/w->kcontrol_news/gStephen Warren1-34/+34
A future change will modify struct snd_soc_dapm_widget to store the actual kcontrol pointers for each kcontrol_new in a field named kcontrols. Rename the existing kcontrols field to enable this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03ASoC: Move DAPM debugfs directory creation to snd_soc_dapm_debugfs_initLars-Peter Clausen1-1/+2
Move the creation of the DAPM debugfs directory to snd_soc_dapm_debugfs_init instead of having the same duplicated code in both codec and card DAPM setup. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03ASoC: Declare const properly for enum textsTakashi Iwai1-1/+1
The enum texts are supposed to be const char * const []. Without the second const, it gets compile warnings like sound/soc/codecs/max98095.c:607:2: warning: initialization discards qualifiers from pointer target type Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28ASoC: Work around allmodconfig failureMark Brown1-0/+3
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-26ASoC: Define constants for WM8962 GPIO functionsMark Brown1-0/+22
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-20ASoC: Add EQ and filter to max98095 CODEC driverPeter Hsiang1-0/+28
This patch adds the equalizer and biquad filter controls. Signed-off-by: Peter Hsiang <peter.hsiang@maxim-ic.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-20ASoC: simple style fixLu Guanqun1-1/+1
replace the tab with spaces, make it align with other paragraphs Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18ASoC: Merge branch 'for-2.6.39' into for-2.6.40Mark Brown5-5/+5
Fix trivial conflict caused by silly spelling fix patch. Conflicts: sound/soc/codecs/wm8994.c
2011-04-13ASoC: Make struct snd_soc_card's dapm_widgets and dapm_routes constLars-Peter Clausen1-2/+2
Those should not be modified (and are not) by the core code, so make them const. This also makes them consistent with the same members of snd_soc_codec. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 04:15:06 +0300