| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 8b4ac5429938dd5f1fbf2eea0687f08cbcccb6be ]
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-36-tiwai@suse.de
Stable-dep-of: 0c4a13ba8859 ("ALSA: wavefront: Fix integer overflow in sample size validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 93a81ca0657758b607c3f4ba889ae806be9beb73 upstream.
The PCM OSS layer tries to clear the buffer with the silence data at
initialization (or reconfiguration) of a stream with the explicit call
of snd_pcm_format_set_silence() with runtime->dma_area. But this may
lead to a UAF because the accessed runtime->dma_area might be freed
concurrently, as it's performed outside the PCM ops.
For avoiding it, move the code into the PCM core and perform it inside
the buffer access lock, so that it won't be changed during the
operation.
Reported-by: syzbot+32d4647f551007595173@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/68164d8e.050a0220.11da1b.0019.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250516080817.20068-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit aa85822c611aef7cd4dc17d27121d43e21bb82f0 ]
PC speaker works well on this platform in BIOS and in Linux until sound
card drivers are loaded. Then it stops working.
There seems to be a beep generator node at 0x1a in this CODEC
(ALC269_TYPE_ALC215) but it seems to be only connected to capture mixers
at nodes 0x22 and 0x23.
If I unmute the mixer input for 0x1a at node 0x23 and start recording
from its "ALC285 Analog" capture device I can clearly hear beeps in that
recording.
So the beep generator is indeed working properly, however I wasn't able to
figure out any way to connect it to speakers.
However, the bits in the "Passthrough Control" register (0x36) seems to
work at least partially: by zeroing "B" and "h" and setting "S" I can at
least make the PIT PC speaker output appear either in this laptop speakers
or headphones (depending on whether they are connected or not).
There are some caveats, however:
* If the CODEC gets runtime-suspended the beeps stop so it needs HDA beep
device for keeping it awake during beeping.
* If the beep generator node is generating any beep the PC beep passthrough
seems to be temporarily inhibited, so the HDA beep device has to be
prevented from using the actual beep generator node - but the beep device
is still necessary due to the previous point.
* In contrast with other platforms here beep amplification has to be
disabled otherwise the beeps output are WAY louder than they were on pure
BIOS setup.
Unless someone (from Realtek probably) knows how to make the beep generator
node output appear in speakers / headphones using PC beep passthrough seems
to be the only way to make PC speaker beeping actually work on this
platform.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: kailang@realtek.com
Link: https://patch.msgid.link/7461f695b4daed80f2fc4b1463ead47f04f9ad05.1739741254.git.mail@maciej.szmigiero.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd33993a9721ab1dae38bd37c9f665987d554239 ]
s/devince/device/
It's used only internally, so no any behavior changes.
Fixes: 37e0e14128e0 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250511141147.10246-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56f1f30e6795b890463d9b20b11e576adf5a2f77 ]
The conversion function from MIDI 1.0 to UMP packet contains an
internal buffer to keep the incoming MIDI bytes, and its size is 4, as
it was supposed to be the max size for a MIDI1 UMP packet data.
However, the implementation overlooked that SysEx is handled in a
different format, and it can be up to 6 bytes, as found in
do_convert_to_ump(). It leads eventually to a buffer overflow, and
may corrupt the memory when a longer SysEx message is received.
The fix is simply to extend the buffer size to 6 to fit with the SysEx
UMP message.
Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Reported-by: Argusee <vr@darknavy.com>
Link: https://patch.msgid.link/20250429124845.25128-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0eba2a7e858907a746ba69cd002eb9eb4dbd7bf3 ]
This reverts commit 9bdd10d57a88 ("ASoC: ops: Shift tested values in
snd_soc_put_volsw() by +min"), and makes some additional related
updates.
There are two ways the platform_max could be interpreted; the maximum
register value, or the maximum value the control can be set to. The
patch moved from treating the value as a control value to a register
one. When the patch was applied it was technically correct as
snd_soc_limit_volume() also used the register interpretation. However,
even then most of the other usages treated platform_max as a
control value, and snd_soc_limit_volume() has since been updated to
also do so in commit fb9ad24485087 ("ASoC: ops: add correct range
check for limiting volume"). That patch however, missed updating
snd_soc_put_volsw() back to the control interpretation, and fixing
snd_soc_info_volsw_range(). The control interpretation makes more
sense as limiting is typically done from the machine driver, so it is
appropriate to use the customer facing representation rather than the
internal codec representation. Update all the code to consistently use
this interpretation of platform_max.
Finally, also add some comments to the soc_mixer_control struct to
hopefully avoid further patches switching between the two approaches.
Fixes: fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250228151456.3703342-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ebaa86c0bddd2c47c516bf2096b17c0bed71d914 upstream.
When a FB is created from a GTB instead of UMP FB Info inquiry, we
missed the update of the corresponding UMP Group attributes.
Export the call of updater and let it be called from the USB driver.
Fixes: 0642a3c5cacc ("ALSA: ump: Update substream name from assigned FB names")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-5-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0642a3c5cacc0321c755d45ae48f2c84475469a6 ]
We had a nice name scheme in ALSA sequencer UMP binding for each
sequencer port referring to each assigned Function Block name, while
the legacy rawmidi refers only to the UMP Endpoint name. It's better
to align both.
This patch moves the UMP Group attribute update functions into the
core UMP code from the sequencer binding code, and improve the
substream name of the legacy rawmidi.
Link: https://patch.msgid.link/20240729141315.18253-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: aaa55faa2495 ("ALSA: seq: ump: Fix seq port updates per FB info notify")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 831ec5e3538e989c7995137b5c5c661991a09504 ]
Since we put dvc_tlv static variable to a header file it's copied to
each module that includes the header. But not all of them are actually
used it.
Fix this W=1 build warning:
include/sound/tas2781-tlv.h:18:35: warning: 'dvc_tlv' defined but not
used [-Wunused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403290354.v0StnRpc-lkp@intel.com/
Fixes: ae065d0ce9e3 ("ALSA: hda/tas2781: remove digital gain kcontrol")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <0e461545a2a6e9b6152985143e50526322e5f76b.1711665731.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 245eeff18d7a37693815250ae15979ce98c3d190 ]
If the "spk-id-gpios" property is present it points to GPIOs whose
value must be used to select the correct bin file to match the
speakers.
Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type of
speaker fitted is indicated by the values of one or more GPIOs. The
number formed by the GPIOs identifies the tuning required.
The speaker ID must be used in combination with the subsystem ID
(either from PCI SSID or cirrus,firmware-uid property), because the
GPIOs can only indicate variants of a specific model.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1a1c3d794ef6 ("ASoC: cs35l56: Use PCI SSID as the firmware UID")
Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c2c0b67dca3cb3b3cea0dd60075a1c5ba77e2fcd ]
The tas2781-i2c driver gets an IRQ from either ACPI or device tree,
then proceeds to check if the IRQ has a corresponding GPIO and in
case it does enforce the GPIO as input and set a label on it.
This is abuse of the API:
- First we cannot guarantee that the numberspaces of the GPIOs and
the IRQs are the same, i.e that an IRQ number corresponds to
a GPIO number like that.
- Second, GPIO chips and IRQ chips should be treated as orthogonal
APIs, the irqchip needs to ascertain that the backing GPIO line
is set to input etc just using the irqchip.
- Third it is using the legacy <linux/gpio.h> API which should not
be used in new code yet this was added just a year ago.
Delete the offending code.
If this creates problems the GPIO and irqchip maintainers can help
to fix the issues.
It *should* not create any problems, because the irq isn't
used anywhere in the driver, it's just obtained and then
left unused.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240807-asoc-tas-gpios-v2-1-bd0f2705d58b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4089d82e67a9967fc5bf2b4e5ef820d67fe73924 ]
The acpi_subysystem_id is only written and freed, not read, so
unnecessary.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/454639336be28d2b50343e9c8366a56b0975e31d.1707456753.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: c2c0b67dca3c ("ASoC: tas2781-i2c: Drop weird GPIO code")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6ce8a28c768dbbad3f818db286cd0f4c7a921a8 ]
The UMP 1.1 spec says that an RPN/NRPN should be sent when one of the
following occurs:
* a CC 38 is received
* a subsequent CC 6 is received
* a CC 98, 99, 100, and 101 is received, indicating the last RPN/NRPN
message has ended and a new one has started
That said, we should send a partial data even if it's not fully
filled. Let's change the UMP conversion helper code to follow that
rule.
Link: https://patch.msgid.link/20240731130528.12600-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f774c757e3fb2ac32dc4377e8f21f3364a8df81 ]
In only loading RCA (Reconfigurable Architecture) binary case, no DSP
program will be working inside tas2563/tas2781, that is dsp-bypass mode,
do not support speaker protection, or audio acoustic algorithms in this
mode.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240614133646.910-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8343410ddf08fc36a9b9cc7c51a4e53a262d4c6 ]
Sometimes the stream may be stopped due to XRUN events, in which case
the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and
start the stream again.
In these cases, we must wait for the DMA channel to synchronize before
marking the stream as prepared for playback, as the DMA channel gets
stopped by drop() without any synchronization. Make sure the ALSA core
synchronizes the DMA channel by adding a sync_stop() hook.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-1-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b195acf5266d2dee4067f89345c3e6b88d925311 ]
Calibrated data will be set to default after loading DSP config params,
which will cause speaker protection work abnormally. Reload calibrated
data after loading DSP config params. Remove declaration of unused API
which load calibrated data in wrong sequence, changed the copyright year
and correct file name in license
header.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240518141546.1742-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 72a77d7631c6e392677c0134343cf5edcd3a4572 ]
Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to match the regmap cache when the ASP is
powered-up.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However. If it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP registers. This means that we can't assume the default
state of the ASP registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
To avoid blocking probe() for several seconds waiting for the
firmware, the silicon defaults are assumed. This allows the machine
driver to setup the ASP configuration during probe() without being
blocked. If the ASP is hooked up and used, the SUPPLY widget
ensures that the chip registers match what was configured in the
regmap cache.
If the machine driver does not hook up the ASP, it is assumed that
it won't call any functions to configure the ASP DAI. Therefore
the regmap cache will be clean for these registers so a
regcache_sync() will not overwrite the chip registers. If the
DAI is not hooked up, the dummy SUPPLY widget will not be
invoked so it will never force-overwrite the chip registers.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: d344873c4cbd ("ALSA: hda: cs35l56: Fix lifetime of cs_dsp instance")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24af0d7c0f9f49a243b77e607e3f4a4737386b59 ]
Initial support for ARL w/ RT711
Signed-off-by: Arun T <arun.t@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915080635.1619942-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 1f1b820dc3c6 ("ASoC: SOF: Intel: mtl: Correct rom_status_reg")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f848337cd801c7106a4ec0d61765771dab2a5909 ]
The actual event processing was already done by workqueue items. We can
move the event dispatching there as well, rather than doing it already
in the interrupt handler callback.
This change has a rather profound "side effect" on the reliability of
the FPGA programming: once we enter programming mode, we must not issue
any snd_emu1010_fpga_{read,write}() calls until we're done, as these
would badly mess up the programming protocol. But exactly that would
happen when trying to program the dock, as that triggers GPIO interrupts
as a side effect. This is mitigated by deferring the actual interrupt
handling, as workqueue items are not re-entrant.
To avoid scheduling the dispatcher on non-events, we now explicitly
ignore GPIO IRQs triggered by "uninteresting" pins, which happens a lot
as a side effect of calling snd_emu1010_fpga_{read,write}().
Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-4-oswald.buddenhagen@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6974f2cd2fa94fef663133af23722cf607853e22 ]
Change the enum names for the IPC types to be more descriptive and drop
tying the IPC4 to Intel SoCs.
Add defines to avoid build breakage while the related code is
modified to use the new enum names.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919104226.32239-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 305539a25a1c ("ASoC: SOF: Intel: add default firmware library path for LNL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 76f5f55c45b906710c9565a7e68c8d782c46b394 ]
Make calibration functions configurable to support different calibration
data storage modes.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/5859c77ffef752b8a9784713b412d815d7e2688c.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 5f51de7e30c7 ("ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eba2eb2495f47690400331c722868902784e59de ]
snd_soc_card_get_kcontrol() must be holding a read lock on
card->controls_rwsem while walking the controls list.
Compare with snd_ctl_find_numid().
The existing function is renamed snd_soc_card_get_kcontrol_locked()
so that it can be called from contexts that are already holding
card->controls_rwsem (for example, control get/put functions).
There are few direct or indirect callers of
snd_soc_card_get_kcontrol(), and most are safe. Three require
changes, which have been included in this patch:
codecs/cs35l45.c:
cs35l45_activate_ctl() is called from a control put() function so
is changed to call snd_soc_card_get_kcontrol_locked().
codecs/cs35l56.c:
cs35l56_sync_asp1_mixer_widgets_with_firmware() is called from
control get()/put() functions so is changed to call
snd_soc_card_get_kcontrol_locked().
fsl/fsl_xcvr.c:
fsl_xcvr_activate_ctl() is called from three places, one of which
already holds card->controls_rwsem:
1. fsl_xcvr_mode_put(), a control put function, which will
already be holding card->controls_rwsem.
2. fsl_xcvr_startup(), a DAI startup function.
3. fsl_xcvr_shutdown(), a DAI shutdown function.
To fix this, fsl_xcvr_activate_ctl() has been changed to call
snd_soc_card_get_kcontrol_locked() so that it is safe to call
directly from fsl_xcvr_mode_put().
The fsl_xcvr_startup() and fsl_xcvr_shutdown() functions have been
changed to take a read lock on card->controls_rsem() around calls
to fsl_xcvr_activate_ctl(). While this is not very elegant, it
keeps the change small, to avoid this patch creating a large
collateral churn in fsl/fsl_xcvr.c.
Analysis of other callers of snd_soc_card_get_kcontrol() is that
they do not need any changes, they are not holding card->controls_rwsem
when they call snd_soc_card_get_kcontrol().
Direct callers of snd_soc_card_get_kcontrol():
fsl/fsl_spdif.c: fsl_spdif_dai_probe() - DAI probe function
fsl/fsl_micfil.c: voice_detected_fn() - IRQ handler
Indirect callers via soc_component_notify_control():
codecs/cs42l43: cs42l43_mic_shutter() - IRQ handler
codecs/cs42l43: cs42l43_spk_shutter() - IRQ handler
codecs/ak4118.c: ak4118_irq_handler() - IRQ handler
codecs/wm_adsp.c: wm_adsp_write_ctl() - not currently used
Indirect callers via snd_soc_limit_volume():
qcom/sc8280xp.c: sc8280xp_snd_init() - DAIlink init function
ti/rx51.c: rx51_aic34_init() - DAI init function
I don't have hardware to test the fsl/*, qcom/sc828xp.c, ti/rx51.c
and ak4118.c changes.
Backport note:
The fsl/, qcom/, cs35l45, cs35l56 and cs42l43 callers were added
since the Fixes commit so won't all be present on older kernels.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 209c6cdfd283 ("ASoC: soc-card: move snd_soc_card_get_kcontrol() to soc-card")
Link: https://lore.kernel.org/r/20240221123710.690224-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d5a2b5dd0a8d2b2b535b5266699429dbd48e62f ]
ASoC is using 2 type of prefix (asoc_xxx() vs snd_soc_xxx()), but there
is no particular reason about that [1].
To reduce confusing, standarding these to snd_soc_xxx() is sensible.
This patch adds asoc_xxx() macro to keep compatible for a while.
It will be removed if all drivers were switched to new style.
Link: https://lore.kernel.org/r/87h6td3hus.wl-kuninori.morimoto.gx@renesas.com [1]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fs3ks26i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 1382d8b55129 ("ASoC: qcom: Fix uninitialized pointer dmactl")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 34a1066981a967eab619938e7b35a9be6b4c34e1 upstream.
The tascodec_init() of the snd-soc-tas2781-comlib module is called from
snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls
request_firmware_nowait() with parameter THIS_MODULE and a cont/callback
from the latter modules.
The latter modules can be removed while their callbacks are running,
resulting in a general protection failure.
Add module parameter to tascodec_init() so request_firmware_nowait() can
be called with the module of the callback.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/118dad922cef50525e5aab09badef2fa0eb796e5.1707076603.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f0220575e65abe09c09cd17826a3cdea76e8d58f upstream.
In some setups like Speaker amps which are very sensitive, ex: keeping them
unmute without actual data stream for very short duration results in a
static charge and results in pop and clicks. To minimize this, provide a way
to mute and unmute such codecs during trigger callbacks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ johan: backport to v6.6.2 ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ba2de401d32625fe538d3f2c00ca73740dd2d516 ]
Pass the PCI SSID of the audio interface through to the machine driver.
This allows the machine driver to use the SSID to uniquely identify the
specific hardware configuration and apply any platform-specific
configuration.
struct snd_sof_pdata is passed around inside the SOF code, but it then
passes configuration information to the machine driver through
struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID
information has been added to both snd_sof_pdata and
snd_soc_acpi_mach_params.
PCI does not define 0x0000 as an invalid value so we can't use zero to
indicate that the struct member was not written. Instead a flag is
included to indicate that a value has been written to the
subsystem_vendor and subsystem_device members.
sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct
pci_dev so it can fill in the SSID value.
sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It
copies the SSID information across to the struct snd_soc_acpi_mach_params.
This done before calling any custom set_mach_params() so that it could be
used by the set_mach_params() callback to apply variant params.
The machine driver receives the struct snd_soc_acpi_mach as its
platform_data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 47f56e38a199bd45514b8e0142399cba4feeaf1a ]
Add members to struct snd_soc_card to store the PCI subsystem ID (SSID)
of the soundcard.
The PCI specification provides two registers to store a vendor-specific
SSID that can be read by drivers to uniquely identify a particular
"soundcard". This is defined in the PCI specification to distinguish
products that use the same silicon (and therefore have the same silicon
ID) so that product-specific differences can be applied.
PCI only defines 0xFFFF as an invalid value. 0x0000 is not defined as
invalid. So the usual pattern of zero-filling the struct and then
assuming a zero value unset will not work. A flag is included to
indicate when the SSID information has been filled in.
Unlike DMI information, which has a free-format entirely up to the vendor,
the PCI SSID has a strictly defined format and a registry of vendor IDs.
It is usual in Windows drivers that the SSID is used as the sole identifier
of the specific end-product and the Windows driver contains tables mapping
that to information about the hardware setup, rather than using ACPI
properties.
This SSID is important information for ASoC components that need to apply
hardware-specific configuration on PCI-based systems.
As the SSID is a generic part of the PCI specification and is treated as
identifying the "soundcard", it is reasonable to include this information
in struct snd_soc_card, instead of components inventing their own custom
ways to pass this information around.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 77bf613f0bf08c021309cdb5f84b5f630b829261 ]
Enabling the active/passive shared boosts requires setting SYNC_EN, but
*not* before receiving the PLL Lock signal.
Due to improper error handling, it was not obvious that waiting for the
completion operation times out and, consequently, the shared boost is
never activated.
Further investigations revealed the signal is triggered while
snd_pcm_start() is executed, right after receiving the
SNDRV_PCM_TRIGGER_START command, which happens long after the
SND_SOC_DAPM_PRE_PMU event handler is invoked as part of
snd_pcm_prepare(). That is where cs35l41_global_enable() is called
from.
Increasing the wait duration doesn't help, as it only causes an
unnecessary delay in the invocation of snd_pcm_start(). Moving the wait
and the subsequent regmap operations to the SNDRV_PCM_TRIGGER_START
callback is not a solution either, since they would be executed in an
IRQ-off atomic context.
Solve the issue by setting the SYNC_EN bit in PWR_CTRL3 register right
after receiving the PLL Lock interrupt.
Additionally, drop the unnecessary writes to PWR_CTRL1 register, part of
the original mdsync_up_seq, which would have toggled GLOBAL_EN with
unwanted consequences on PLL locking behavior.
Fixes: f5030564938b ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Some drivers use one event callback for multiple widgets but still need
to perform a bit different actions based on actual widget. This is done
by comparing widget name, however drivers tend to miss possible name
prefix. Add a helper to solve common mistakes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231003155710.821315-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On init we have sequence:
for_each_card_prelinks(card, i, dai_link) {
ret = snd_soc_add_pcm_runtime(card, dai_link);
ret = init_some_other_things(...);
if (ret)
goto probe_end:
for_each_card_rtds(card, rtd) {
ret = soc_init_pcm_runtime(card, rtd);
probe_end:
while on exit:
for_each_card_rtds(card, rtd)
snd_soc_link_exit(rtd);
If init_some_other_things() step fails due to error we end up with
not fully setup rtds and try to call snd_soc_link_exit on them, which
depending on contents on .link_exit handler, can end up dereferencing
NULL pointer.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929103243.705433-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While transitioning ASoC code for iov_iter usages, I kept the argument
name as "buf" as the original code. But, iov_iter is an iterator, and
using the name "buf" may be misleading: the crucial difference is that
iov_iter can be proceeded after the operation, hence it can't be
passed twice, while a simple "buffer" sounds as if reusable.
To make the usage clearer, rename the argument from "buf" to "iter".
There is no functional changes, just names.
Fixes: 66201cacc33d ("ASoC: component: Add generic PCM copy ops")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wje+VkXjjfVTmK-uJdG_M5=ar14QxAwK+XDiq07k_pzBg@mail.gmail.com
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230831130457.8180-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Passing the iov_iter to the process callback is rather buggy, as the
iterator has been already processed for playback. Similarly, it makes
the copy for capture buggy after the process callback reading the
iterator out. Moreover, all existing process callbacks don't refer to
the passed iterator at all. So, it's better to drop the argument from
the process callback.
Fixes: 9bebd65443c1 ("ASoC: dmaengine: Use iov_iter for process callback, too")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wje+VkXjjfVTmK-uJdG_M5=ar14QxAwK+XDiq07k_pzBg@mail.gmail.com
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230831130457.8180-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.6
The rest of the updates for v6.6, some of the highlights include:
- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.
|
|
When the UMP Endpoint is declared as "static", that is, no dynamic
reassignment of UMP Groups, it makes little sense to expose always all
16 groups with 16 substreams. Many of those substreams are disabled
groups, hence they are useless, but applications don't know it and try
to open / access all those substreams unnecessarily.
This patch limits the number of UMP legacy rawmidi substreams only to
the active groups. The behavior is changed only for the static
endpoint (i.e. devices without UMP v1.1 feature implemented or with
the static block flag is set).
Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230824075108.29958-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Xingyu Wu <xingyu.wu@starfivetech.com>:
This patch series adds I2S support for the StarFive JH7110 RISC-V
SoC based on Designware I2S controller. There has three I2S channels
(RX/TX0/TX1) on the JH7110 SoC, one of which is for record(RX) and
two for playback(TX).
The first patch adds support for the StarFive JH7110 SoC in the
Designware I2S bindings.
The second patch adds the ops to get data from platform bus in the
I2S driver.
The third patch adds support for the StarFive JH7110 SoC in
the Designware I2S driver.
The fourth patch fixes the name of I2STX1 pinmux.
The last patch adds device node of I2S RX/TX0/TX1 in JH7110 dts.
This patch series is based on Linux-next(20230818) which is merge
clock, syscon and dma nodes for the StarFive JH7110 SoC.
The series has been tested and works normally on the VisionFive 2
board by plugging an audio expansion board.
|
|
Add StarFive JH7110(TX0/TX1/RX channels) SoC support in the
designware I2S driver and a flag to check if it is on the JH7110 SoC.
These channels need to enable clocks, resets and syscon register on the
JH7110 SoC. So add init ops in platform data for the JH7110 SoC to do this.
Their resets should be deassert before changing the parent of clocks so
these are done in the init ops of platform data.
The I2S controllers use DMA controller by platform data on the JH7110
and their settings about snd_dmaengine_dai_dma_data() should be added
in the dw_configure_dai_by_pd(). And use dmaengine PCM registration if
these do not have IRQ on the JH7110 SoC.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Link: https://lore.kernel.org/r/20230821144151.207339-4-xingyu.wu@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This codec was used by the deleted S3C board
sound/soc/samsung/s3c24xx_uda134x.c.
Fixes: 503278c12701 ("ASoC: samsung: remove unused drivers")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230822-delete-l3-v2-1-b3ffc07348af@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC. The chain is currently based of Lee's for-mfd-next
branch.
This series is mostly just a resend keeping pace with the kernel under
it, except for a minor fixup in the ASoC stuff.
Thanks,
Charles
Charles Keepax (4):
dt-bindings: mfd: cirrus,cs42l43: Add initial DT binding
mfd: cs42l43: Add support for cs42l43 core driver
pinctrl: cs42l43: Add support for the cs42l43
ASoC: cs42l43: Add support for the cs42l43
Lucas Tanure (2):
soundwire: bus: Allow SoundWire peripherals to register IRQ handlers
spi: cs42l43: Add SPI controller support
.../bindings/sound/cirrus,cs42l43.yaml | 313 +++
MAINTAINERS | 4 +
drivers/mfd/Kconfig | 23 +
drivers/mfd/Makefile | 3 +
drivers/mfd/cs42l43-i2c.c | 98 +
drivers/mfd/cs42l43-sdw.c | 239 ++
drivers/mfd/cs42l43.c | 1188 +++++++++
drivers/mfd/cs42l43.h | 28 +
drivers/pinctrl/cirrus/Kconfig | 11 +
drivers/pinctrl/cirrus/Makefile | 2 +
drivers/pinctrl/cirrus/pinctrl-cs42l43.c | 609 +++++
drivers/soundwire/bus.c | 32 +
drivers/soundwire/bus_type.c | 12 +
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-cs42l43.c | 284 ++
include/linux/mfd/cs42l43-regs.h | 1184 +++++++++
include/linux/mfd/cs42l43.h | 102 +
include/linux/soundwire/sdw.h | 9 +
include/sound/cs42l43.h | 17 +
sound/soc/codecs/Kconfig | 16 +
sound/soc/codecs/Makefile | 4 +
sound/soc/codecs/cs42l43-jack.c | 946 +++++++
sound/soc/codecs/cs42l43-sdw.c | 74 +
sound/soc/codecs/cs42l43.c | 2278 +++++++++++++++++
sound/soc/codecs/cs42l43.h | 131 +
26 files changed, 7615 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
create mode 100644 drivers/mfd/cs42l43-i2c.c
create mode 100644 drivers/mfd/cs42l43-sdw.c
create mode 100644 drivers/mfd/cs42l43.c
create mode 100644 drivers/mfd/cs42l43.h
create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs42l43.c
create mode 100644 drivers/spi/spi-cs42l43.c
create mode 100644 include/linux/mfd/cs42l43-regs.h
create mode 100644 include/linux/mfd/cs42l43.h
create mode 100644 include/sound/cs42l43.h
create mode 100644 sound/soc/codecs/cs42l43-jack.c
create mode 100644 sound/soc/codecs/cs42l43-sdw.c
create mode 100644 sound/soc/codecs/cs42l43.c
create mode 100644 sound/soc/codecs/cs42l43.h
--
2.30.2
|
|
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
The ASoC component provides the majority of the functionality of the
device, all the audio functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Finally all users have been converted to the new PCM copy ops, let's
drop the obsoleted copy_kernel and copy_user ops completely.
Link: https://lore.kernel.org/r/20230815190136.8987-26-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now all ASoC users have been replaced to use the new PCM copy ops,
let's drop the obsoleted copy_user ops and its helper function.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815190136.8987-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Along with the conversion to PCM copy ops, use the iov_iter for the
pointer to be passed to the dmaengine process callback, too. It
avoids the direct reference of iter_iov_addr(), and it can potentially
help for the drivers to access memory properly (although both atmel
and stm drivers don't use the given buffer address at all for now).
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230815190136.8987-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For following the ALSA PCM core change, a new PCM copy ops is added
toe ASoC component framework: snd_soc_component_driver receives the
copy ops, and snd_soc_pcm_component_copy() helper is provided.
This also fixes a long-standing potential bug where the ASoC driver
covers only copy_user PCM callback and misses the copy from kernel
pointers (such as OSS PCM layer), too.
As of this patch, the old copy_user is still kept, but it'll be
dropped later after all drivers are converted.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815190136.8987-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add two more helpers for copying memory between iov_iter and iomem,
which will be used by the new PCM copy ops in a few drivers.
The existing helpers became wrappers of those now.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
iov_iter is a universal interface to copy the data chunk from/to
user-space and kernel in a unified manner. This API can fit for ALSA
PCM copy ops, too; we had to split to copy_user and copy_kernel in the
past, and those can be unified to a single ops with iov_iter.
This patch adds a new PCM copy ops that passes iov_iter for copying
both kernel and user-space in the same way. This patch touches only
the ALSA PCM core part, and the actual users will be replaced in the
following patches.
The expansion of iov_iter is done in the PCM core right before calling
each copy callback. It's a bit suboptimal, but I took this now as
it's the most straightforward replacement. The more conversion to
iov_iter in the caller side is a TODO for future.
As of now, the old copy_user and copy_kernel ops are still kept.
Once after all users are converted, we'll drop the old copy_user and
copy_kernel ops, too.
Link: https://lore.kernel.org/r/20230815190136.8987-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Convert the RT5682S to use GPIO descriptors and drop the
legacy GPIO headers.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-5-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the RT5682 to use GPIO descriptors and drop the
legacy GPIO headers.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Make sure to make sure SDW devices can associate with
an LDO1 EN descriptor too, if they so desire by putting
the lookup into the common code.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-4-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the RT5668 to use GPIO descriptors and drop the
legacy GPIO headers.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-3-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The RT5665 driver has some stub support for GPIO descriptors
going back to the initial driver commit, where there are
two GPIO descriptors for the LDO and headphone detection
defined in the device state. Well, let's make use of the
descriptor properly.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-2-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now all users of snd_device_intialize() are gone, let's drop it.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
