summaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2023-08-16wifi: cfg80211: fix sband iftype data lookup for AP_VLANFelix Fietkau1-0/+3
commit 5fb9a9fb71a33be61d7d8e8ba4597bfb18d604d0 upstream. AP_VLAN interfaces are virtual, so doesn't really exist as a type for capabilities. When passed in as a type, AP is the one that's really intended. Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230622165919.46841-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16netfilter: nf_tables: GC transaction API to avoid race with control planePablo Neira Ayuso1-1/+63
commit 5f68718b34a531a556f2f50300ead2862278da26 upstream. The set types rhashtable and rbtree use a GC worker to reclaim memory. From system work queue, in periodic intervals, a scan of the table is done. The major caveat here is that the nft transaction mutex is not held. This causes a race between control plane and GC when they attempt to delete the same element. We cannot grab the netlink mutex from the work queue, because the control plane has to wait for the GC work queue in case the set is to be removed, so we get following deadlock: cpu 1 cpu2 GC work transaction comes in , lock nft mutex `acquire nft mutex // BLOCKS transaction asks to remove the set set destruction calls cancel_work_sync() cancel_work_sync will now block forever, because it is waiting for the mutex the caller already owns. This patch adds a new API that deals with garbage collection in two steps: 1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT so they are not visible via lookup. Annotate current GC sequence in the GC transaction. Enqueue GC transaction work as soon as it is full. If ruleset is updated, then GC transaction is aborted and retried later. 2) GC work grabs the mutex. If GC sequence has changed then this GC transaction lost race with control plane, abort it as it contains stale references to objects and let GC try again later. If the ruleset is intact, then this GC transaction deactivates and removes the elements and it uses call_rcu() to destroy elements. Note that no elements are removed from GC lockless path, the _DEAD bit is set and pointers are collected. GC catchall does not remove the elements anymore too. There is a new set->dead flag that is set on to abort the GC transaction to deal with set->ops->destroy() path which removes the remaining elements in the set from commit_release, where no mutex is held. To deal with GC when mutex is held, which allows safe deactivate and removal, add sync GC API which releases the set element object via call_rcu(). This is used by rbtree and pipapo backends which also perform garbage collection from control plane path. Since element removal from sets can happen from control plane and element garbage collection/timeout, it is necessary to keep the set structure alive until all elements have been deactivated and destroyed. We cannot do a cancel_work_sync or flush_work in nft_set_destroy because its called with the transaction mutex held, but the aforementioned async work queue might be blocked on the very mutex that nft_set_destroy() callchain is sitting on. This gives us the choice of ABBA deadlock or UaF. To avoid both, add set->refs refcount_t member. The GC API can then increment the set refcount and release it once the elements have been free'd. Set backends are adapted to use the GC transaction API in a follow up patch entitled: ("netfilter: nf_tables: use gc transaction API in set backends") This is joint work with Florian Westphal. Fixes: cfed7e1b1f8e ("netfilter: nf_tables: add set garbage collection helpers") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11vxlan: Fix nexthop hash sizeBenjamin Poirier1-2/+2
[ Upstream commit 0756384fb1bd38adb2ebcfd1307422f433a1d772 ] The nexthop code expects a 31 bit hash, such as what is returned by fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash returned by skb_get_hash() can lead to problems related to the fact that 'int hash' is a negative number when the MSB is set. In the case of hash threshold nexthop groups, nexthop_select_path_hthr() will disproportionately select the first nexthop group entry. In the case of resilient nexthop groups, nexthop_select_path_res() may do an out of bounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535 which leads to the following panic: BUG: unable to handle page fault for address: ffffc900025910c8 PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 RIP: 0000:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: CR2: ffffc900025910c8 ---[ end trace 0000000000000000 ]--- RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x2ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fix this problem by ensuring the MSB of hash is 0 using a right shift - the same approach used in fib_multipath_hash() and rt6_multipath_hash(). Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11net: annotate data-races around sk->sk_markEric Dumazet3-6/+7
[ Upstream commit 3c5b4d69c358a9275a8de98f87caf6eda644b086 ] sk->sk_mark is often read while another thread could change the value. Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11net: gro: fix misuse of CB in udp socket lookupRichard Gobert1-0/+43
[ Upstream commit 7938cd15436873f649f31cb867bac2d88ca564d0 ] This patch fixes a misuse of IP{6}CB(skb) in GRO, while calling to `udp6_lib_lookup2` when handling udp tunnels. `udp6_lib_lookup2` fetch the device from CB. The fix changes it to fetch the device from `skb->dev`. l3mdev case requires special attention since it has a master and a slave device. Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Reported-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11net: move gso declarations and functions to their own filesEric Dumazet3-0/+111
[ Upstream commit d457a0e329b0bfd3a1450e0b1a18cd2b47a25a08 ] Move declarations into include/net/gso.h and code into net/core/gso.c Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stanislav Fomichev <sdf@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 7938cd154368 ("net: gro: fix misuse of CB in udp socket lookup") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03tcp: Reduce chance of collisions in inet6_hashfn().Stewart Smith1-6/+2
[ Upstream commit d11b0df7ddf1831f3e170972f43186dad520bfcc ] For both IPv4 and IPv6 incoming TCP connections are tracked in a hash table with a hash over the source & destination addresses and ports. However, the IPv6 hash is insufficient and can lead to a high rate of collisions. The IPv6 hash used an XOR to fit everything into the 96 bits for the fast jenkins hash, meaning it is possible for an external entity to ensure the hash collides, thus falling back to a linear search in the bucket, which is slow. We take the approach of hash the full length of IPv6 address in __ipv6_addr_jhash() so that all users can benefit from a more secure version. While this may look like it adds overhead, the reality of modern CPUs means that this is unmeasurable in real world scenarios. In simulating with llvm-mca, the increase in cycles for the hashing code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9 on Nehalem (base of ~173). In commit dd6d2910c5e0 ("netfilter: conntrack: switch to siphash") netfilter switched from a jenkins hash to a siphash, but even the faster hsiphash is a more significant overhead (~20-30%) in some preliminary testing. So, in this patch, we keep to the more conservative approach to ensure we don't add much overhead per SYN. In testing, this results in a consistently even spread across the connection buckets. In both testing and real-world scenarios, we have not found any measurable performance impact. Fixes: 08dcdbf6a7b9 ("ipv6: use a stronger hash for tcp") Signed-off-by: Stewart Smith <trawets@amazon.com> Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230721222410.17914-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03vxlan: calculate correct header length for GPEJiri Benc1-4/+9
[ Upstream commit 94d166c5318c6edd1e079df8552233443e909c33 ] VXLAN-GPE does not add an extra inner Ethernet header. Take that into account when calculating header length. This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is cached. In the collect_md mode (which is the only mode that VXLAN-GPE supports), there's no magic auto-setting of the tunnel interface MTU. It can't be, since the destination and thus the underlying interface may be different for each packet. So, the administrator is responsible for setting the correct tunnel interface MTU. Apparently, the administrators are capable enough to calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36). They set the tunnel interface MTU to 1464. If you run a TCP stream over such interface, it's then segmented according to the MTU 1464, i.e. producing 1514 bytes frames. Which is okay, this still fits the lower MTU. However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as the header size and thus incorrectly calculates the frame size to be 1528. This leads to ICMP too big message being generated (locally), PMTU of 1450 to be cached and the TCP stream to be resegmented. The fix is to use the correct actual header size, especially for skb_tunnel_check_pmtu calculation. Fixes: e1e5314de08ba ("vxlan: implement GPE") Signed-off-by: Jiri Benc <jbenc@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27tcp: annotate data-races around tp->notsent_lowatEric Dumazet1-1/+5
[ Upstream commit 1aeb87bc1440c5447a7fa2d6e3c2cca52cbd206b ] tp->notsent_lowat can be read locklessly from do_tcp_getsockopt() and tcp_poll(). Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-10-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27tcp: annotate data-races around tp->keepalive_probesEric Dumazet1-2/+7
[ Upstream commit 6e5e1de616bf5f3df1769abc9292191dfad9110a ] do_tcp_getsockopt() reads tp->keepalive_probes while another cpu might change its value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27tcp: annotate data-races around tp->keepalive_intvlEric Dumazet1-2/+7
[ Upstream commit 5ecf9d4f52ff2f1d4d44c9b68bc75688e82f13b4 ] do_tcp_getsockopt() reads tp->keepalive_intvl while another cpu might change its value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27tcp: annotate data-races around tp->keepalive_timeEric Dumazet1-2/+5
[ Upstream commit 4164245c76ff906c9086758e1c3f87082a7f5ef5 ] do_tcp_getsockopt() reads tp->keepalive_time while another cpu might change its value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27Bluetooth: use RCU for hci_conn_params and iterate safely in hci_syncPauli Virtanen1-0/+5
[ Upstream commit 195ef75e19287b4bc413da3e3e3722b030ac881e ] hci_update_accept_list_sync iterates over hdev->pend_le_conns and hdev->pend_le_reports, and waits for controller events in the loop body, without holding hdev lock. Meanwhile, these lists and the items may be modified e.g. by le_scan_cleanup. This can invalidate the list cursor or any other item in the list, resulting to invalid behavior (eg use-after-free). Use RCU for the hci_conn_params action lists. Since the loop bodies in hci_sync block and we cannot use RCU or hdev->lock for the whole loop, copy list items first and then iterate on the copy. Only the flags field is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we read valid values. Free params everywhere with hci_conn_params_free so the cleanup is guaranteed to be done properly. This fixes the following, which can be triggered e.g. by BlueZ new mgmt-tester case "Add + Remove Device Nowait - Success", or by changing hci_le_set_cig_params to always return false, and running iso-tester: ================================================================== BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) ? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) kasan_report (mm/kasan/report.c:538) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) ? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780) ? mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_unlock (kernel/locking/mutex.c:538) ? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861) hci_cmd_sync_work (net/bluetooth/hci_sync.c:306) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) ? __pfx_worker_thread (kernel/workqueue.c:2480) kthread (kernel/kthread.c:376) ? __pfx_kthread (kernel/kthread.c:331) ret_from_fork (arch/x86/entry/entry_64.S:314) </TASK> Allocated by task 31: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) __kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383) hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277) hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589) hci_connect_cis (net/bluetooth/hci_conn.c:2266) iso_connect_cis (net/bluetooth/iso.c:390) iso_sock_connect (net/bluetooth/iso.c:899) __sys_connect (net/socket.c:2003 net/socket.c:2020) __x64_sys_connect (net/socket.c:2027) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Freed by task 15: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/generic.c:523) __kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244) __kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800) hci_conn_params_del (net/bluetooth/hci_core.c:2323) le_scan_cleanup (net/bluetooth/hci_conn.c:202) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:314) ================================================================== Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27net: ipv4: use consistent txhash in TIME_WAIT and SYN_RECVAntoine Tenart1-1/+1
[ Upstream commit c0a8966e2bc7d31f77a7246947ebc09c1ff06066 ] When using IPv4/TCP, skb->hash comes from sk->sk_txhash except in TIME_WAIT and SYN_RECV where it's not set in the reply skb from ip_send_unicast_reply. Those packets will have a mismatched hash with others from the same flow as their hashes will be 0. IPv6 does not have the same issue as the hash is set from the socket txhash in those cases. This commits sets the hash in the reply skb from ip_send_unicast_reply, which makes the IPv4 code behaving like IPv6. Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 5e5265522a9a ("tcp: annotate data-races around tcp_rsk(req)->txhash") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23net/sched: make psched_mtu() RTNL-less safePedro Tammela1-1/+1
[ Upstream commit 150e33e62c1fa4af5aaab02776b6c3812711d478 ] Eric Dumazet says[1]: ------- Speaking of psched_mtu(), I see that net/sched/sch_pie.c is using it without holding RTNL, so dev->mtu can be changed underneath. KCSAN could issue a warning. ------- Annotate dev->mtu with READ_ONCE() so KCSAN don't issue a warning. [1] https://lore.kernel.org/all/CANn89iJoJO5VtaJ-2=_d2aOQhb0Xw8iBT_Cxqp2HyuS-zj6azw@mail.gmail.com/ v1 -> v2: Fix commit message Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230711021634.561598-1-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23net/sched: taprio: replace tc_taprio_qopt_offload :: enable with a "cmd" enumVladimir Oltean1-1/+6
[ Upstream commit 2d800bc500fb3fb07a0fb42e2d0a1356fb9e1e8f ] Inspired from struct flow_cls_offload :: cmd, in order for taprio to be able to report statistics (which is future work), it seems that we need to drill one step further with the ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) multiplexing, and pass the command as part of the common portion of the muxed structure. Since we already have an "enable" variable in tc_taprio_qopt_offload, refactor all drivers to check for "cmd" instead of "enable", and reject every other command except "replace" and "destroy" - to be future proof. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> # for lan966x Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 8046063df887 ("igc: Rename qbv_enable to taprio_offload_enable") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23netfilter: conntrack: don't fold port numbers into addresses before hashingFlorian Westphal1-0/+3
[ Upstream commit eaf9e7192ec9af2fbf1b6eb2299dd0feca6c5f7e ] Originally this used jhash2() over tuple and folded the zone id, the pernet hash value, destination port and l4 protocol number into the 32bit seed value. When the switch to siphash was done, I used an on-stack temporary buffer to build a suitable key to be hashed via siphash(). But this showed up as performance regression, so I got rid of the temporary copy and collected to-be-hashed data in 4 u64 variables. This makes it easy to build tuples that produce the same hash, which isn't desirable even though chain lengths are limited. Switch back to plain siphash, but just like with jhash2(), take advantage of the fact that most of to-be-hashed data is already in a suitable order. Use an empty struct as annotation in 'struct nf_conntrack_tuple' to mark last member that can be used as hash input. The only remaining data that isn't present in the tuple structure are the zone identifier and the pernet hash: fold those into the key. Fixes: d2c806abcf0b ("netfilter: conntrack: use siphash_4u64") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23netfilter: nf_tables: report use refcount overflowPablo Neira Ayuso1-4/+27
[ Upstream commit 1689f25924ada8fe14a4a82c38925d04994c7142 ] Overflow use refcount checks are not complete. Add helper function to deal with object reference counter tracking. Report -EMFILE in case UINT_MAX is reached. nft_use_dec() splats in case that reference counter underflows, which should not ever happen. Add nft_use_inc_restore() and nft_use_dec_restore() which are used to restore reference counter from error and abort paths. Use u32 in nft_flowtable and nft_object since helper functions cannot work on bitfields. Remove the few early incomplete checks now that the helper functions are in place and used to check for refcount overflow. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19Bluetooth: MGMT: Fix marking SCAN_RSP as not connectableLuiz Augusto von Dentz1-0/+1
[ Upstream commit 73f55453ea5236a586a7f1b3d5e2ee051d655351 ] When receiving a scan response there is no way to know if the remote device is connectable or not, so when it cannot be merged don't make any assumption and instead just mark it with a new flag defined as MGMT_DEV_FOUND_SCAN_RSP so userspace can tell it is a standalone SCAN_RSP. Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+CYMsDSPTxBn09Js3BcdC-x7vZFfyLJ3ppZGGwJKmUTw@mail.gmail.com/ Fixes: c70a7e4cc8d2 ("Bluetooth: Add support for Not Connectable flag for Device Found events") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19netlink: Add __sock_i_ino() for __netlink_diag_dump().Kuniyuki Iwashima1-0/+1
[ Upstream commit 25a9c8a4431c364f97f75558cb346d2ad3f53fbb ] syzbot reported a warning in __local_bh_enable_ip(). [0] Commit 8d61f926d420 ("netlink: fix potential deadlock in netlink_set_err()") converted read_lock(&nl_table_lock) to read_lock_irqsave() in __netlink_diag_dump() to prevent a deadlock. However, __netlink_diag_dump() calls sock_i_ino() that uses read_lock_bh() and read_unlock_bh(). If CONFIG_TRACE_IRQFLAGS=y, read_unlock_bh() finally enables IRQ even though it should stay disabled until the following read_unlock_irqrestore(). Using read_lock() in sock_i_ino() would trigger a lockdep splat in another place that was fixed in commit f064af1e500a ("net: fix a lockdep splat"), so let's add __sock_i_ino() that would be safe to use under BH disabled. [0]: WARNING: CPU: 0 PID: 5012 at kernel/softirq.c:376 __local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376 Modules linked in: CPU: 0 PID: 5012 Comm: syz-executor487 Not tainted 6.4.0-rc7-syzkaller-00202-g6f68fc395f49 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 RIP: 0010:__local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376 Code: 45 bf 01 00 00 00 e8 91 5b 0a 00 e8 3c 15 3d 00 fb 65 8b 05 ec e9 b5 7e 85 c0 74 58 5b 5d c3 65 8b 05 b2 b6 b4 7e 85 c0 75 a2 <0f> 0b eb 9e e8 89 15 3d 00 eb 9f 48 89 ef e8 6f 49 18 00 eb a8 0f RSP: 0018:ffffc90003a1f3d0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000201 RCX: 1ffffffff1cf5996 RDX: 0000000000000000 RSI: 0000000000000201 RDI: ffffffff8805c6f3 RBP: ffffffff8805c6f3 R08: 0000000000000001 R09: ffff8880152b03a3 R10: ffffed1002a56074 R11: 0000000000000005 R12: 00000000000073e4 R13: dffffc0000000000 R14: 0000000000000002 R15: 0000000000000000 FS: 0000555556726300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 000000007c646000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sock_i_ino+0x83/0xa0 net/core/sock.c:2559 __netlink_diag_dump+0x45c/0x790 net/netlink/diag.c:171 netlink_diag_dump+0xd6/0x230 net/netlink/diag.c:207 netlink_dump+0x570/0xc50 net/netlink/af_netlink.c:2269 __netlink_dump_start+0x64b/0x910 net/netlink/af_netlink.c:2374 netlink_dump_start include/linux/netlink.h:329 [inline] netlink_diag_handler_dump+0x1ae/0x250 net/netlink/diag.c:238 __sock_diag_cmd net/core/sock_diag.c:238 [inline] sock_diag_rcv_msg+0x31e/0x440 net/core/sock_diag.c:269 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2547 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1914 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0xde/0x190 net/socket.c:747 ____sys_sendmsg+0x71c/0x900 net/socket.c:2503 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2557 __sys_sendmsg+0xf7/0x1c0 net/socket.c:2586 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5303aaabb9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc7506e548 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5303aaabb9 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 00007f5303a6ed60 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5303a6edf0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Fixes: 8d61f926d420 ("netlink: fix potential deadlock in netlink_set_err()") Reported-by: syzbot+5da61cf6a9bc1902d422@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=5da61cf6a9bc1902d422 Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230626164313.52528-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addressesVladimir Oltean1-2/+10
[ Upstream commit d06f925f13976ab82167c93467c70a337a0a3cda ] When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19wifi: cfg80211: fix regulatory disconnect with OCB/NANJohannes Berg1-12/+1
[ Upstream commit e8c2af660ba0790afd14d5cbc2fd05c6dc85e207 ] Since regulatory disconnect was added, OCB and NAN interface types were added, which made it completely unusable for any driver that allowed OCB/NAN. Add OCB/NAN (though NAN doesn't do anything, we don't have any info) and also remove all the logic that opts out, so it won't be broken again if/when new interface types are added. Fixes: 6e0bd6c35b02 ("cfg80211: 802.11p OCB mode handling") Fixes: cb3b7d87652a ("cfg80211: add start / stop NAN commands") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20230616222844.2794d1625a26.I8e78a3789a29e6149447b3139df724a6f1b46fc3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19wifi: mac80211: add helpers to access sband iftype dataJohannes Berg1-1/+43
[ Upstream commit 1ec7291e247055fab3a088e1a333a31e7c06e2dd ] There's quite a bit of code accessing sband iftype data (HE, HE 6 GHz, EHT) and we always need to remember to use the ieee80211_vif_type_p2p() helper. Add new helpers to directly get it from the sband/vif rather than having to call ieee80211_vif_type_p2p(). Convert most code with the following spatch: @@ expression vif, sband; @@ -ieee80211_get_he_iftype_cap(sband, ieee80211_vif_type_p2p(vif)) +ieee80211_get_he_iftype_cap_vif(sband, vif) @@ expression vif, sband; @@ -ieee80211_get_eht_iftype_cap(sband, ieee80211_vif_type_p2p(vif)) +ieee80211_get_eht_iftype_cap_vif(sband, vif) @@ expression vif, sband; @@ -ieee80211_get_he_6ghz_capa(sband, ieee80211_vif_type_p2p(vif)) +ieee80211_get_he_6ghz_capa_vif(sband, vif) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230604120651.db099f49e764.Ie892966c49e22c7b7ee1073bc684f142debfdc84@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Stable-dep-of: f91295987576 ("wifi: iwlwifi: mvm: correctly access HE/EHT sband capa") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-22Merge tag 'nf-23-06-21' of ↵Paolo Abeni1-2/+29
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net This is v3, including a crash fix for patch 01/14. The following patchset contains Netfilter/IPVS fixes for net: 1) Fix UDP segmentation with IPVS tunneled traffic, from Terin Stock. 2) Fix chain binding transaction logic, add a bound flag to rule transactions. Remove incorrect logic in nft_data_hold() and nft_data_release(). 3) Add a NFT_TRANS_PREPARE_ERROR deactivate state to deal with releasing the set/chain as a follow up to 1240eb93f061 ("netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE") 4) Drop map element references from preparation phase instead of set destroy path, otherwise bogus EBUSY with transactions such as: flush chain ip x y delete chain ip x w where chain ip x y contains jump/goto from set elements. 5) Pipapo set type does not regard generation mask from the walk iteration. 6) Fix reference count underflow in set element reference to stateful object. 7) Several patches to tighten the nf_tables API: - disallow set element updates of bound anonymous set - disallow unbound anonymous set/chain at the end of transaction. - disallow updates of anonymous set. - disallow timeout configuration for anonymous sets. 8) Fix module reference leak in chain updates. 9) Fix nfnetlink_osf module autoload. 10) Fix deletion of basechain when NFTA_CHAIN_HOOK is specified as in iptables-nft. This Netfilter batch is larger than usual at this stage, I am aware we are fairly late in the -rc cycle, if you prefer to route them through net-next, please let me know. netfilter pull request 23-06-21 * tag 'nf-23-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: Fix for deleting base chains with payload netfilter: nfnetlink_osf: fix module autoload netfilter: nf_tables: drop module reference after updating chain netfilter: nf_tables: disallow timeout for anonymous sets netfilter: nf_tables: disallow updates of anonymous sets netfilter: nf_tables: reject unbound chain set before commit phase netfilter: nf_tables: reject unbound anonymous set before commit phase netfilter: nf_tables: disallow element updates of bound anonymous sets netfilter: nf_tables: fix underflow in object reference counter netfilter: nft_set_pipapo: .walk does not deal with generations netfilter: nf_tables: drop map element references from preparation phase netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain netfilter: nf_tables: fix chain binding transaction logic ipvs: align inner_mac_header for encapsulation ==================== Link: https://lore.kernel.org/r/20230621100731.68068-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-20netfilter: nf_tables: reject unbound anonymous set before commit phasePablo Neira Ayuso1-0/+3
Add a new list to track set transaction and to check for unbound anonymous sets before entering the commit phase. Bail out at the end of the transaction handling if an anonymous set remains unbound. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-06-20netfilter: nf_tables: drop map element references from preparation phasePablo Neira Ayuso1-1/+4
set .destroy callback releases the references to other objects in maps. This is very late and it results in spurious EBUSY errors. Drop refcount from the preparation phase instead, update set backend not to drop reference counter from set .destroy path. Exceptions: NFT_TRANS_PREPARE_ERROR does not require to drop the reference counter because the transaction abort path releases the map references for each element since the set is unbound. The abort path also deals with releasing reference counter for new elements added to unbound sets. Fixes: 591054469b3e ("netfilter: nf_tables: revisit chain/object refcounting from elements") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-06-20netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chainPablo Neira Ayuso1-0/+2
Add a new state to deal with rule expressions deactivation from the newrule error path, otherwise the anonymous set remains in the list in inactive state for the next generation. Mark the set/chain transaction as unbound so the abort path releases this object, set it as inactive in the next generation so it is not reachable anymore from this transaction and reference counter is dropped. Fixes: 1240eb93f061 ("netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-06-20netfilter: nf_tables: fix chain binding transaction logicPablo Neira Ayuso1-1/+20
Add bound flag to rule and chain transactions as in 6a0a8d10a366 ("netfilter: nf_tables: use-after-free in failing rule with bound set") to skip them in case that the chain is already bound from the abort path. This patch fixes an imbalance in the chain use refcnt that triggers a WARN_ON on the table and chain destroy path. This patch also disallows nested chain bindings, which is not supported from userspace. The logic to deal with chain binding in nft_data_hold() and nft_data_release() is not correct. The NFT_TRANS_PREPARE state needs a special handling in case a chain is bound but next expressions in the same rule fail to initialize as described by 1240eb93f061 ("netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE"). The chain is left bound if rule construction fails, so the objects stored in this chain (and the chain itself) are released by the transaction records from the abort path, follow up patch ("netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain") completes this error handling. When deleting an existing rule, chain bound flag is set off so the rule expression .destroy path releases the objects. Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-06-20Merge tag 'ipsec-2023-06-20' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec ipsec-2023-06-20
2023-06-20net: dsa: introduce preferred_default_local_cpu_port and use on MT7530Vladimir Oltean1-0/+8
Since the introduction of the OF bindings, DSA has always had a policy that in case multiple CPU ports are present in the device tree, the numerically smallest one is always chosen. The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because it has higher bandwidth. The MT7530 driver developers had 3 options: - to modify DSA when the MT7531 switch support was introduced, such as to prefer the better port - to declare both CPU ports in device trees as CPU ports, and live with the sub-optimal performance resulting from not preferring the better port - to declare just port 6 in the device tree as a CPU port Of course they chose the path of least resistance (3rd option), kicking the can down the road. The hardware description in the device tree is supposed to be stable - developers are not supposed to adopt the strategy of piecemeal hardware description, where the device tree is updated in lockstep with the features that the kernel currently supports. Now, as a result of the fact that they did that, any attempts to modify the device tree and describe both CPU ports as CPU ports would make DSA change its default selection from port 6 to 5, effectively resulting in a performance degradation visible to users with the MT7531BE switch as can be seen below. Without preferring port 6: [ ID][Role] Interval Transfer Bitrate Retr [ 5][TX-C] 0.00-20.00 sec 374 MBytes 157 Mbits/sec 734 sender [ 5][TX-C] 0.00-20.00 sec 373 MBytes 156 Mbits/sec receiver [ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 778 Mbits/sec 0 sender [ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 777 Mbits/sec receiver With preferring port 6: [ ID][Role] Interval Transfer Bitrate Retr [ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 856 Mbits/sec 273 sender [ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 855 Mbits/sec receiver [ 7][RX-C] 0.00-20.00 sec 1.72 GBytes 737 Mbits/sec 15 sender [ 7][RX-C] 0.00-20.00 sec 1.71 GBytes 736 Mbits/sec receiver Using one port for WAN and the other ports for LAN is a very popular use case which is what this test emulates. As such, this change proposes that we retroactively modify stable kernels (which don't support the modification of the CPU port assignments, so as to let user space fix the problem and restore the throughput) to keep the mt7530 driver preferring port 6 even with device trees where the hardware is more fully described. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-14net/sched: qdisc_destroy() old ingress and clsact Qdiscs before graftingPeilin Ye1-0/+8
mini_Qdisc_pair::p_miniq is a double pointer to mini_Qdisc, initialized in ingress_init() to point to net_device::miniq_ingress. ingress Qdiscs access this per-net_device pointer in mini_qdisc_pair_swap(). Similar for clsact Qdiscs and miniq_egress. Unfortunately, after introducing RTNL-unlocked RTM_{NEW,DEL,GET}TFILTER requests (thanks Hillf Danton for the hint), when replacing ingress or clsact Qdiscs, for example, the old Qdisc ("@old") could access the same miniq_{in,e}gress pointer(s) concurrently with the new Qdisc ("@new"), causing race conditions [1] including a use-after-free bug in mini_qdisc_pair_swap() reported by syzbot: BUG: KASAN: slab-use-after-free in mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573 Write of size 8 at addr ffff888045b31308 by task syz-executor690/14901 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:319 print_report mm/kasan/report.c:430 [inline] kasan_report+0x11c/0x130 mm/kasan/report.c:536 mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573 tcf_chain_head_change_item net/sched/cls_api.c:495 [inline] tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:509 tcf_chain_tp_insert net/sched/cls_api.c:1826 [inline] tcf_chain_tp_insert_unique net/sched/cls_api.c:1875 [inline] tc_new_tfilter+0x1de6/0x2290 net/sched/cls_api.c:2266 ... @old and @new should not affect each other. In other words, @old should never modify miniq_{in,e}gress after @new, and @new should not update @old's RCU state. Fixing without changing sch_api.c turned out to be difficult (please refer to Closes: for discussions). Instead, make sure @new's first call always happen after @old's last call (in {ingress,clsact}_destroy()) has finished: In qdisc_graft(), return -EBUSY if @old has any ongoing filter requests, and call qdisc_destroy() for @old before grafting @new. Introduce qdisc_refcount_dec_if_one() as the counterpart of qdisc_refcount_inc_nz() used for filter requests. Introduce a non-static version of qdisc_destroy() that does a TCQ_F_BUILTIN check, just like qdisc_put() etc. Depends on patch "net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs". [1] To illustrate, the syzkaller reproducer adds ingress Qdiscs under TC_H_ROOT (no longer possible after commit c7cfbd115001 ("net/sched: sch_ingress: Only create under TC_H_INGRESS")) on eth0 that has 8 transmission queues: Thread 1 creates ingress Qdisc A (containing mini Qdisc a1 and a2), then adds a flower filter X to A. Thread 2 creates another ingress Qdisc B (containing mini Qdisc b1 and b2) to replace A, then adds a flower filter Y to B. Thread 1 A's refcnt Thread 2 RTM_NEWQDISC (A, RTNL-locked) qdisc_create(A) 1 qdisc_graft(A) 9 RTM_NEWTFILTER (X, RTNL-unlocked) __tcf_qdisc_find(A) 10 tcf_chain0_head_change(A) mini_qdisc_pair_swap(A) (1st) | | RTM_NEWQDISC (B, RTNL-locked) RCU sync 2 qdisc_graft(B) | 1 notify_and_destroy(A) | tcf_block_release(A) 0 RTM_NEWTFILTER (Y, RTNL-unlocked) qdisc_destroy(A) tcf_chain0_head_change(B) tcf_chain0_head_change_cb_del(A) mini_qdisc_pair_swap(B) (2nd) mini_qdisc_pair_swap(A) (3rd) | ... ... Here, B calls mini_qdisc_pair_swap(), pointing eth0->miniq_ingress to its mini Qdisc, b1. Then, A calls mini_qdisc_pair_swap() again during ingress_destroy(), setting eth0->miniq_ingress to NULL, so ingress packets on eth0 will not find filter Y in sch_handle_ingress(). This is just one of the possible consequences of concurrently accessing miniq_{in,e}gress pointers. Fixes: 7a096d579e8e ("net: sched: ingress: set 'unlocked' flag for Qdisc ops") Fixes: 87f373921c4e ("net: sched: ingress: set 'unlocked' flag for clsact Qdisc ops") Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/ Cc: Hillf Danton <hdanton@sina.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-14net/sched: act_ct: Fix promotion of offloaded unreplied tuplePaul Blakey1-1/+1
Currently UNREPLIED and UNASSURED connections are added to the nf flow table. This causes the following connection packets to be processed by the flow table which then skips conntrack_in(), and thus such the connections will remain UNREPLIED and UNASSURED even if reply traffic is then seen. Even still, the unoffloaded reply packets are the ones triggering hardware update from new to established state, and if there aren't any to triger an update and/or previous update was missed, hardware can get out of sync with sw and still mark packets as new. Fix the above by: 1) Not skipping conntrack_in() for UNASSURED packets, but still refresh for hardware, as before the cited patch. 2) Try and force a refresh by reply-direction packets that update the hardware rules from new to established state. 3) Remove any bidirectional flows that didn't failed to update in hardware for re-insertion as bidrectional once any new packet arrives. Fixes: 6a9bad0069cf ("net/sched: act_ct: offload UDP NEW connections") Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/1686313379-117663-1-git-send-email-paulb@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-10Merge tag 'nf-23-06-08' of ↵David S. Miller1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf netfilter pull request 23-06-08 Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Add commit and abort set operation to pipapo set abort path. 2) Bail out immediately in case of ENOMEM in nfnetlink batch. 3) Incorrect error path handling when creating a new rule leads to dangling pointer in set transaction list. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-08netfilter: nf_tables: integrate pipapo into commit protocolPablo Neira Ayuso1-1/+3
The pipapo set backend follows copy-on-update approach, maintaining one clone of the existing datastructure that is being updated. The clone and current datastructures are swapped via rcu from the commit step. The existing integration with the commit protocol is flawed because there is no operation to clean up the clone if the transaction is aborted. Moreover, the datastructure swap happens on set element activation. This patch adds two new operations for sets: commit and abort, these new operations are invoked from the commit and abort steps, after the transactions have been digested, and it updates the pipapo set backend to use it. This patch adds a new ->pending_update field to sets to maintain a list of sets that require this new commit and abort operations. Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-06-07net: sched: move rtm_tca_policy declaration to include fileEric Dumazet1-0/+2
rtm_tca_policy is used from net/sched/sch_api.c and net/sched/cls_api.c, thus should be declared in an include file. This fixes the following sparse warning: net/sched/sch_api.c:1434:25: warning: symbol 'rtm_tca_policy' was not declared. Should it be static? Fixes: e331473fee3d ("net/sched: cls_api: add missing validation of netlink attributes") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-07net: sched: add rcu annotations around qdisc->qdisc_sleepingEric Dumazet1-2/+4
syzbot reported a race around qdisc->qdisc_sleeping [1] It is time we add proper annotations to reads and writes to/from qdisc->qdisc_sleeping. [1] BUG: KCSAN: data-race in dev_graft_qdisc / qdisc_lookup_rcu read to 0xffff8881286fc618 of 8 bytes by task 6928 on cpu 1: qdisc_lookup_rcu+0x192/0x2c0 net/sched/sch_api.c:331 __tcf_qdisc_find+0x74/0x3c0 net/sched/cls_api.c:1174 tc_get_tfilter+0x18f/0x990 net/sched/cls_api.c:2547 rtnetlink_rcv_msg+0x7af/0x8c0 net/core/rtnetlink.c:6386 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x375/0x4c0 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmsg+0x1e3/0x270 net/socket.c:2586 __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __x64_sys_sendmsg+0x46/0x50 net/socket.c:2593 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff8881286fc618 of 8 bytes by task 6912 on cpu 0: dev_graft_qdisc+0x4f/0x80 net/sched/sch_generic.c:1115 qdisc_graft+0x7d0/0xb60 net/sched/sch_api.c:1103 tc_modify_qdisc+0x712/0xf10 net/sched/sch_api.c:1693 rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6395 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x375/0x4c0 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmsg+0x1e3/0x270 net/socket.c:2586 __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __x64_sys_sendmsg+0x46/0x50 net/socket.c:2593 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 6912 Comm: syz-executor.5 Not tainted 6.4.0-rc3-syzkaller-00190-g0d85b27b0cc6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/16/2023 Fixes: 3a7d0d07a386 ("net: sched: extend Qdisc with rcu") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Buslov <vladbu@nvidia.com> Acked-by: Jamal Hadi Salim<jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-07rfs: annotate lockless accesses to sk->sk_rxhashEric Dumazet1-5/+13
Add READ_ONCE()/WRITE_ONCE() on accesses to sk->sk_rxhash. This also prevents a (smart ?) compiler to remove the condition in: if (sk->sk_rxhash != newval) sk->sk_rxhash = newval; We need the condition to avoid dirtying a shared cache line. Fixes: fec5e652e58f ("rfs: Receive Flow Steering") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-07Merge tag 'for-net-2023-06-05' of ↵Jakub Kicinski2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fixes to debugfs registration - Fix use-after-free in hci_remove_ltk/hci_remove_irk - Fixes to ISO channel support - Fix missing checks for invalid L2CAP DCID - Fix l2cap_disconnect_req deadlock - Add lock to protect HCI_UNREGISTER * tag 'for-net-2023-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Add missing checks for invalid DCID Bluetooth: ISO: use correct CIS order in Set CIG Parameters event Bluetooth: ISO: don't try to remove CIG if there are bound CIS left Bluetooth: Fix l2cap_disconnect_req deadlock Bluetooth: hci_qca: fix debugfs registration Bluetooth: fix debugfs registration Bluetooth: hci_sync: add lock to protect HCI_UNREGISTER Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk Bluetooth: ISO: Fix CIG auto-allocation to select configurable CIG Bluetooth: ISO: consider right CIS when removing CIG at cleanup ==================== Link: https://lore.kernel.org/r/20230606003454.2392552-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-07ipv6: rpl: Fix Route of Death.Kuniyuki Iwashima1-3/+0
A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156. The Source Routing Header (SRH) has the following format: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Next Header | Hdr Ext Len | Routing Type | Segments Left | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CmprI | CmprE | Pad | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | . . . Addresses[1..n] . . . | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The originator of an SRH places the first hop's IPv6 address in the IPv6 header's IPv6 Destination Address and the second hop's IPv6 address as the first address in Addresses[1..n]. The CmprI and CmprE fields indicate the number of prefix octets that are shared with the IPv6 Destination Address. When CmprI or CmprE is not 0, Addresses[1..n] are compressed as follows: 1..n-1 : (16 - CmprI) bytes n : (16 - CmprE) bytes Segments Left indicates the number of route segments remaining. When the value is not zero, the SRH is forwarded to the next hop. Its address is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6 Destination Address. When Segment Left is greater than or equal to 2, the size of SRH is not changed because Addresses[1..n-1] are decompressed and recompressed with CmprI. OTOH, when Segment Left changes from 1 to 0, the new SRH could have a different size because Addresses[1..n-1] are decompressed with CmprI and recompressed with CmprE. Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has 16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to 16 bytes and not recompressed. Finally, the new SRH will need more room in the header, and the size is (16 - 1) * (n - 1) bytes. Here the max value of n is 255 as Segment Left is u8, so in the worst case, we have to allocate 3825 bytes in the skb headroom. However, now we only allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7 bytes). If the decompressed size overflows the room, skb_push() hits BUG() below [0]. Instead of allocating the fixed buffer for every packet, let's allocate enough headroom only when we receive SRH with Segment Left 1. [0]: skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo kernel BUG at net/core/skbuff.c:200! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec0047 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_panic (net/core/skbuff.c:200) Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90000003da0 EFLAGS: 00000246 RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540 RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800 R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190 FS: 00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> skb_push (net/core/skbuff.c:210) ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5494) process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934) __napi_poll (net/core/dev.c:6496) net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) do_softirq (kernel/softirq.c:472 kernel/softirq.c:459) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:396) __dev_queue_xmit (net/core/dev.c:4272) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:724 net/socket.c:747) __sys_sendto (net/socket.c:2144) __x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f453a138aea Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003 RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b </TASK> Modules linked in: Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr") Reported-by: Max VA Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-06Bluetooth: ISO: use correct CIS order in Set CIG Parameters eventPauli Virtanen1-1/+2
The order of CIS handle array in Set CIG Parameters response shall match the order of the CIS_ID array in the command (Core v5.3 Vol 4 Part E Sec 7.8.97). We send CIS_IDs mainly in the order of increasing CIS_ID (but with "last" CIS first if it has fixed CIG_ID). In handling of the reply, we currently assume this is also the same as the order of hci_conn in hdev->conn_hash, but that is not true. Match the correct hci_conn to the correct handle by matching them based on the CIG+CIS combination. The CIG+CIS combination shall be unique for ISO_LINK hci_conn at state >= BT_BOUND, which we maintain in hci_le_set_cig_params. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-06Bluetooth: fix debugfs registrationJohan Hovold1-0/+1
Since commit ec6cef9cd98d ("Bluetooth: Fix SMP channel registration for unconfigured controllers") the debugfs interface for unconfigured controllers will be created when the controller is configured. There is however currently nothing preventing a controller from being configured multiple time (e.g. setting the device address using btmgmt) which results in failed attempts to register the already registered debugfs entries: debugfs: File 'features' in directory 'hci0' already present! debugfs: File 'manufacturer' in directory 'hci0' already present! debugfs: File 'hci_version' in directory 'hci0' already present! ... debugfs: File 'quirk_simultaneous_discovery' in directory 'hci0' already present! Add a controller flag to avoid trying to register the debugfs interface more than once. Fixes: ec6cef9cd98d ("Bluetooth: Fix SMP channel registration for unconfigured controllers") Cc: stable@vger.kernel.org # 4.0 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-06Bluetooth: hci_sync: add lock to protect HCI_UNREGISTERZhengping Jiang1-0/+1
When the HCI_UNREGISTER flag is set, no jobs should be scheduled. Fix potential race when HCI_UNREGISTER is set after the flag is tested in hci_cmd_sync_queue. Fixes: 0b94f2651f56 ("Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set") Signed-off-by: Zhengping Jiang <jiangzp@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-03net/ipv6: convert skip_notify_on_dev_down sysctl to u8Eric Dumazet1-1/+1
Save a bit a space, and could help future sysctls to use the same pattern. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-03net/ipv6: fix bool/int mismatch for skip_notify_on_dev_downEric Dumazet1-1/+1
skip_notify_on_dev_down ctl table expects this field to be an int (4 bytes), not a bool (1 byte). Because proc_dou8vec_minmax() was added in 5.13, this patch converts skip_notify_on_dev_down to an int. Following patch then converts the field to u8 and use proc_dou8vec_minmax(). Fixes: 7c6bb7d2faaf ("net/ipv6: Add knob to skip DELROUTE message on device down") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-02net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294Akihiro Suda1-5/+1
With this commit, all the GIDs ("0 4294967294") can be written to the "net.ipv4.ping_group_range" sysctl. Note that 4294967295 (0xffffffff) is an invalid GID (see gid_valid() in include/linux/uidgid.h), and an attempt to register this number will cause -EINVAL. Prior to this commit, only up to GID 2147483647 could be covered. Documentation/networking/ip-sysctl.rst had "0 4294967295" as an example value, but this example was wrong and causing -EINVAL. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Co-developed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-02neighbour: fix unaligned access to pneigh_entryQingfang DENG1-1/+1
After the blamed commit, the member key is longer 4-byte aligned. On platforms that do not support unaligned access, e.g., MIPS32R2 with unaligned_action set to 1, this will trigger a crash when accessing an IPv6 pneigh_entry, as the key is cast to an in6_addr pointer. Change the type of the key to u32 to make it aligned. Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.") Signed-off-by: Qingfang DENG <qingfang.deng@siflower.com.cn> Link: https://lore.kernel.org/r/20230601015432.159066-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-01tcp: fix mishandling when the sack compression is deferred.fuyuanli1-0/+1
In this patch, we mainly try to handle sending a compressed ack correctly if it's deferred. Here are more details in the old logic: When sack compression is triggered in the tcp_compressed_ack_kick(), if the sock is owned by user, it will set TCP_DELACK_TIMER_DEFERRED and then defer to the release cb phrase. Later once user releases the sock, tcp_delack_timer_handler() should send a ack as expected, which, however, cannot happen due to lack of ICSK_ACK_TIMER flag. Therefore, the receiver would not sent an ack until the sender's retransmission timeout. It definitely increases unnecessary latency. Fixes: 5d9f4262b7ea ("tcp: add SACK compression") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: fuyuanli <fuyuanli@didiglobal.com> Signed-off-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/netdev/20230529113804.GA20300@didi-ThinkCentre-M920t-N000/ Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230531080150.GA20424@didi-ThinkCentre-M920t-N000 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-30net: mana: Fix perf regression: remove rx_cqes, tx_cqes countersHaiyang Zhang1-2/+0
The apc->eth_stats.rx_cqes is one per NIC (vport), and it's on the frequent and parallel code path of all queues. So, r/w into this single shared variable by many threads on different CPUs creates a lot caching and memory overhead, hence perf regression. And, it's not accurate due to the high volume concurrent r/w. For example, a workload is iperf with 128 threads, and with RPS enabled. We saw perf regression of 25% with the previous patch adding the counters. And this patch eliminates the regression. Since the error path of mana_poll_rx_cq() already has warnings, so keeping the counter and convert it to a per-queue variable is not necessary. So, just remove this counter from this high frequency code path. Also, remove the tx_cqes counter for the same reason. We have warnings & other counters for errors on that path, and don't need to count every normal cqe processing. Cc: stable@vger.kernel.org Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/1685115537-31675-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-30tcp: deny tcp_disconnect() when threads are waitingEric Dumazet1-0/+4
Historically connect(AF_UNSPEC) has been abused by syzkaller and other fuzzers to trigger various bugs. A recent one triggers a divide-by-zero [1], and Paolo Abeni was able to diagnose the issue. tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN and TCP REPAIR mode being not used. Then later if socket lock is released in sk_wait_data(), another thread can call connect(AF_UNSPEC), then make this socket a TCP listener. When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf() and attempt a divide by 0 in tcp_rcv_space_adjust() [1] This patch adds a new socket field, counting number of threads blocked in sk_wait_event() and inet_wait_for_connect(). If this counter is not zero, tcp_disconnect() returns an error. This patch adds code in blocking socket system calls, thus should not hurt performance of non blocking ones. Note that we probably could revert commit 499350a5a6e7 ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore original tcpi_rcv_mss meaning (was 0 if no payload was ever received on a socket) [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740 Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48 RSP: 0018:ffffc900033af660 EFLAGS: 00010206 RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001 RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8 R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344 FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616 tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681 inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1038 ____sys_recvmsg+0x210/0x5a0 net/socket.c:2720 ___sys_recvmsg+0xf2/0x180 net/socket.c:2762 do_recvmmsg+0x25e/0x6e0 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5c0108c0f9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003 RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000 </TASK> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Paolo Abeni <pabeni@redhat.com> Diagnosed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20230526163458.2880232-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-25net/handshake: Enable the SNI extension to work properlyChuck Lever1-0/+1
Enable the upper layer protocol to specify the SNI peername. This avoids the need for tlshd to use a DNS lookup, which can return a hostname that doesn't match the incoming certificate's SubjectName. Fixes: 2fd5532044a8 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake") Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-09 21:18:42 +0300