summaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2018-04-20slip: Check if rstate is initialized before uncompressingTejaswi Tanikella1-0/+1
[ Upstream commit 3f01ddb962dc506916c243f9524e8bef97119b77 ] On receiving a packet the state index points to the rstate which must be used to fill up IP and TCP headers. But if the state index points to a rstate which is unitialized, i.e. filled with zeros, it gets stuck in an infinite loop inside ip_fast_csum trying to compute the ip checsum of a header with zero length. 89.666953: <2> [<ffffff9dd3e94d38>] slhc_uncompress+0x464/0x468 89.666965: <2> [<ffffff9dd3e87d88>] ppp_receive_nonmp_frame+0x3b4/0x65c 89.666978: <2> [<ffffff9dd3e89dd4>] ppp_receive_frame+0x64/0x7e0 89.666991: <2> [<ffffff9dd3e8a708>] ppp_input+0x104/0x198 89.667005: <2> [<ffffff9dd3e93868>] pppopns_recv_core+0x238/0x370 89.667027: <2> [<ffffff9dd4428fc8>] __sk_receive_skb+0xdc/0x250 89.667040: <2> [<ffffff9dd3e939e4>] pppopns_recv+0x44/0x60 89.667053: <2> [<ffffff9dd4426848>] __sock_queue_rcv_skb+0x16c/0x24c 89.667065: <2> [<ffffff9dd4426954>] sock_queue_rcv_skb+0x2c/0x38 89.667085: <2> [<ffffff9dd44f7358>] raw_rcv+0x124/0x154 89.667098: <2> [<ffffff9dd44f7568>] raw_local_deliver+0x1e0/0x22c 89.667117: <2> [<ffffff9dd44c8ba0>] ip_local_deliver_finish+0x70/0x24c 89.667131: <2> [<ffffff9dd44c92f4>] ip_local_deliver+0x100/0x10c ./scripts/faddr2line vmlinux slhc_uncompress+0x464/0x468 output: ip_fast_csum at arch/arm64/include/asm/checksum.h:40 (inlined by) slhc_uncompress at drivers/net/slip/slhc.c:615 Adding a variable to indicate if the current rstate is initialized. If such a packet arrives, move to toss state. Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20Bluetooth: Fix connection if directed advertising and privacy is usedSzymon Janc1-1/+1
commit 082f2300cfa1a3d9d5221c38c5eba85d4ab98bd8 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net: x25: fix one potential use-after-free issuelinzhang1-2/+2
[ Upstream commit 64df6d525fcff1630098db9238bfd2b3e092d5c1 ] The function x25_init is not properly unregister related resources on error handler.It is will result in kernel oops if x25_init init failed, so add properly unregister call on error handler. Also, i adjust the coding style and make x25_register_sysctl properly return failure. Signed-off-by: linzhang <xiaolou4617@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13cfg80211: make RATE_INFO_BW_20 the defaultJohannes Berg1-1/+1
[ Upstream commit 842be75c77cb72ee546a2b19da9c285fb3ded660 ] Due to the way I did the RX bitrate conversions in mac80211 with spatch, going setting flags to setting the value, many drivers now don't set the bandwidth value for 20 MHz, since with the flags it wasn't necessary to (there was no 20 MHz flag, only the others.) Rather than go through and try to fix up all the drivers, instead renumber the enum so that 20 MHz, which is the typical bandwidth, actually has the value 0, making those drivers all work again. If VHT was hit used with a driver not reporting it, e.g. iwlmvm, this manifested in hitting the bandwidth warning in cfg80211_calculate_bitrate_vht(). Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-31sch_netem: fix skb leak in netem_enqueue()Alexey Kodanev1-0/+19
[ Upstream commit 35d889d10b649fda66121891ec05eca88150059d ] When we exceed current packets limit and we have more than one segment in the list returned by skb_gso_segment(), netem drops only the first one, skipping the rest, hence kmemleak reports: unreferenced object 0xffff880b5d23b600 (size 1024): comm "softirq", pid 0, jiffies 4384527763 (age 2770.629s) hex dump (first 32 bytes): 00 80 23 5d 0b 88 ff ff 00 00 00 00 00 00 00 00 ..#]............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d8a19b9d>] __alloc_skb+0xc9/0x520 [<000000001709b32f>] skb_segment+0x8c8/0x3710 [<00000000c7b9bb88>] tcp_gso_segment+0x331/0x1830 [<00000000c921cba1>] inet_gso_segment+0x476/0x1370 [<000000008b762dd4>] skb_mac_gso_segment+0x1f9/0x510 [<000000002182660a>] __skb_gso_segment+0x1dd/0x620 [<00000000412651b9>] netem_enqueue+0x1536/0x2590 [sch_netem] [<0000000005d3b2a9>] __dev_queue_xmit+0x1167/0x2120 [<00000000fc5f7327>] ip_finish_output2+0x998/0xf00 [<00000000d309e9d3>] ip_output+0x1aa/0x2c0 [<000000007ecbd3a4>] tcp_transmit_skb+0x18db/0x3670 [<0000000042d2a45f>] tcp_write_xmit+0x4d4/0x58c0 [<0000000056a44199>] tcp_tasklet_func+0x3d9/0x540 [<0000000013d06d02>] tasklet_action+0x1ca/0x250 [<00000000fcde0b8b>] __do_softirq+0x1b4/0x5a3 [<00000000e7ed027c>] irq_exit+0x1e2/0x210 Fix it by adding the rest of the segments, if any, to skb 'to_free' list. Add new __qdisc_drop_all() and qdisc_drop_all() functions because they can be useful in the future if we need to drop segmented GSO packets in other places. Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22tcp: sysctl: Fix a race to avoid unexpected 0 window from spaceGao Feng1-3/+5
[ Upstream commit c48367427a39ea0b85c7cf018fe4256627abfd9e ] Because sysctl_tcp_adv_win_scale could be changed any time, so there is one race in tcp_win_from_space. For example, 1.sysctl_tcp_adv_win_scale<=0 (sysctl_tcp_adv_win_scale is negative now) 2.space>>(-sysctl_tcp_adv_win_scale) (sysctl_tcp_adv_win_scale is postive now) As a result, tcp_win_from_space returns 0. It is unexpected. Certainly if the compiler put the sysctl_tcp_adv_win_scale into one register firstly, then use the register directly, it would be ok. But we could not depend on the compiler behavior. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11udplite: fix partial checksum initializationAlexey Kodanev1-0/+1
[ Upstream commit 15f35d49c93f4fa9875235e7bf3e3783d2dd7a1b ] Since UDP-Lite is always using checksum, the following path is triggered when calculating pseudo header for it: udp4_csum_init() or udp6_csum_init() skb_checksum_init_zero_check() __skb_checksum_validate_complete() The problem can appear if skb->len is less than CHECKSUM_BREAK. In this particular case __skb_checksum_validate_complete() also invokes __skb_checksum_complete(skb). If UDP-Lite is using partial checksum that covers only part of a packet, the function will return bad checksum and the packet will be dropped. It can be fixed if we skip skb_checksum_init_zero_check() and only set the required pseudo header checksum for UDP-Lite with partial checksum before udp4_csum_init()/udp6_csum_init() functions return. Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4") Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25net_sched: red: Avoid illegal valuesNogah Frankel1-0/+11
[ Upstream commit 8afa10cbe281b10371fee5a87ab266e48d71a7f9 ] Check the qmin & qmax values doesn't overflow for the given Wlog value. Check that qmin <= qmax. Fixes: a783474591f2 ("[PKT_SCHED]: Generic RED layer") Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25net_sched: red: Avoid devision by zeroNogah Frankel1-1/+1
[ Upstream commit 5c472203421ab4f928aa1ae9e1dbcfdd80324148 ] Do not allow delta value to be zero since it is used as a divisor. Fixes: 8af2a218de38 ("sch_red: Adaptative RED AQM") Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25sctp: set frag_point in sctp_setsockopt_maxseg correctlyXin Long1-1/+2
commit ecca8f88da5c4260cc2bccfefd2a24976704c366 upstream. Now in sctp_setsockopt_maxseg user_frag or frag_point can be set with val >= 8 and val <= SCTP_MAX_CHUNK_LEN. But both checks are incorrect. val >= 8 means frag_point can even be less than SCTP_DEFAULT_MINSEGMENT. Then in sctp_datamsg_from_user(), when it's value is greater than cookie echo len and trying to bundle with cookie echo chunk, the first_len will overflow. The worse case is when it's value is equal as cookie echo len, first_len becomes 0, it will go into a dead loop for fragment later on. In Hangbin syzkaller testing env, oom was even triggered due to consecutive memory allocation in that loop. Besides, SCTP_MAX_CHUNK_LEN is the max size of the whole chunk, it should deduct the data header for frag_point or user_frag check. This patch does a proper check with SCTP_DEFAULT_MINSEGMENT subtracting the sctphdr and datahdr, SCTP_MAX_CHUNK_LEN subtracting datahdr when setting frag_point via sockopt. It also improves sctp_setsockopt_maxseg codes. Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANYJim Westfall1-0/+3
[ Upstream commit cd9ff4de0107c65d69d02253bb25d6db93c3dbc1 ] Map all lookup neigh keys to INADDR_ANY for loopback/point-to-point devices to avoid making an entry for every remote ip the device needs to talk to. This used the be the old behavior but became broken in a263b3093641f (ipv4: Make neigh lookups directly in output packet path) and later removed in 0bb4087cbec0 (ipv4: Fix neigh lookup keying over loopback/point-to-point devices) because it was broken. Signed-off-by: Jim Westfall <jwestfall@surrealistic.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31net: tcp: close sock if net namespace is exitingDan Streetman1-0/+10
[ Upstream commit 4ee806d51176ba7b8ff1efd81f271d7252e03a1d ] When a tcp socket is closed, if it detects that its net namespace is exiting, close immediately and do not wait for FIN sequence. For normal sockets, a reference is taken to their net namespace, so it will never exit while the socket is open. However, kernel sockets do not take a reference to their net namespace, so it may begin exiting while the kernel socket is still open. In this case if the kernel socket is a tcp socket, it will stay open trying to complete its close sequence. The sock's dst(s) hold a reference to their interface, which are all transferred to the namespace's loopback interface when the real interfaces are taken down. When the namespace tries to take down its loopback interface, it hangs waiting for all references to the loopback interface to release, which results in messages like: unregister_netdevice: waiting for lo to become free. Usage count = 1 These messages continue until the socket finally times out and closes. Since the net namespace cleanup holds the net_mutex while calling its registered pernet callbacks, any new net namespace initialization is blocked until the current net namespace finishes exiting. After this change, the tcp socket notices the exiting net namespace, and closes immediately, releasing its dst(s) and their reference to the loopback interface, which lets the net namespace continue exiting. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811 Signed-off-by: Dan Streetman <ddstreet@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABELBen Hutchings1-0/+1
[ Upstream commit e9191ffb65d8e159680ce0ad2224e1acbde6985c ] Commit 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl setting") removed the initialisation of ipv6_pinfo::autoflowlabel and added a second flag to indicate whether this field or the net namespace default should be used. The getsockopt() handling for this case was not updated, so it currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is not explicitly enabled. Fix it to return the effective value, whether that has been set at the socket or net namespace level. Fixes: 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17mac80211: Add RX flag to indicate ICV strippedDavid Spinadel1-1/+4
commit cef0acd4d7d4811d2d19cd0195031bf0dfe41249 upstream. Add a flag that indicates that the WEP ICV was stripped from an RX packet, allowing the device to not transfer that if it's already checked. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02tcp: invalidate rate samples during SACK renegingYousuk Seung1-1/+1
[ Upstream commit d4761754b4fb2ef8d9a1e9d121c4bec84e1fe292 ] Mark tcp_sock during a SACK reneging event and invalidate rate samples while marked. Such rate samples may overestimate bw by including packets that were SACKed before reneging. < ack 6001 win 10000 sack 7001:38001 < ack 7001 win 0 sack 8001:38001 // Reneg detected > seq 7001:8001 // RTO, SACK cleared. < ack 38001 win 10000 In above example the rate sample taken after the last ack will count 7001-38001 as delivered while the actual delivery rate likely could be much lower i.e. 7001-8001. This patch adds a new field tcp_sock.sack_reneg and marks it when we declare SACK reneging and entering TCP_CA_Loss, and unmarks it after the last rate sample was taken before moving back to TCP_CA_Open. This patch also invalidates rate samples taken while tcp_sock.is_sack_reneg is set. Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02ipv4: igmp: guard against silly MTU valuesEric Dumazet1-0/+2
[ Upstream commit b5476022bbada3764609368f03329ca287528dc8 ] IPv4 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in igmp code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv4 minimal MTU. This patch adds missing IPV4_MIN_MTU define, to not abuse ETH_MIN_MTU anymore. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25vhost-vsock: add pkt cancel capabilityPeng Tao1-0/+3
[ Upstream commit 16320f363ae128d9b9c70e60f00f2a572f57c23d ] To allow canceling all packets of a connection. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16net: remove hlist_nulls_add_tail_rcu()Eric Dumazet1-5/+1
[ Upstream commit d7efc6c11b277d9d80b99b1334a78bfe7d7edf10 ] Alexander Potapenko reported use of uninitialized memory [1] This happens when inserting a request socket into TCP ehash, in __sk_nulls_add_node_rcu(), since sk_reuseport is not initialized. Bug was added by commit d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets") Note that d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix") missed the opportunity to get rid of hlist_nulls_add_tail_rcu() : Both UDP sockets and TCP/DCCP listeners no longer use __sk_nulls_add_node_rcu() for their hash insertion. Since all other sockets have unique 4-tuple, the reuseport status has no special meaning, so we can always use hlist_nulls_add_head_rcu() for them and save few cycles/instructions. [1] ================================================================== BUG: KMSAN: use of uninitialized memory in inet_ehash_insert+0xd40/0x1050 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0+ #3288 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace:  <IRQ>  __dump_stack lib/dump_stack.c:16  dump_stack+0x185/0x1d0 lib/dump_stack.c:52  kmsan_report+0x13f/0x1c0 mm/kmsan/kmsan.c:1016  __msan_warning_32+0x69/0xb0 mm/kmsan/kmsan_instr.c:766  __sk_nulls_add_node_rcu ./include/net/sock.h:684  inet_ehash_insert+0xd40/0x1050 net/ipv4/inet_hashtables.c:413  reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:754  inet_csk_reqsk_queue_hash_add+0x1cc/0x300 net/ipv4/inet_connection_sock.c:765  tcp_conn_request+0x31e7/0x36f0 net/ipv4/tcp_input.c:6414  tcp_v4_conn_request+0x16d/0x220 net/ipv4/tcp_ipv4.c:1314  tcp_rcv_state_process+0x42a/0x7210 net/ipv4/tcp_input.c:5917  tcp_v4_do_rcv+0xa6a/0xcd0 net/ipv4/tcp_ipv4.c:1483  tcp_v4_rcv+0x3de0/0x4ab0 net/ipv4/tcp_ipv4.c:1763  ip_local_deliver_finish+0x6bb/0xcb0 net/ipv4/ip_input.c:216  NF_HOOK ./include/linux/netfilter.h:248  ip_local_deliver+0x3fa/0x480 net/ipv4/ip_input.c:257  dst_input ./include/net/dst.h:477  ip_rcv_finish+0x6fb/0x1540 net/ipv4/ip_input.c:397  NF_HOOK ./include/linux/netfilter.h:248  ip_rcv+0x10f6/0x15c0 net/ipv4/ip_input.c:488  __netif_receive_skb_core+0x36f6/0x3f60 net/core/dev.c:4298  __netif_receive_skb net/core/dev.c:4336  netif_receive_skb_internal+0x63c/0x19c0 net/core/dev.c:4497  napi_skb_finish net/core/dev.c:4858  napi_gro_receive+0x629/0xa50 net/core/dev.c:4889  e1000_receive_skb drivers/net/ethernet/intel/e1000/e1000_main.c:4018  e1000_clean_rx_irq+0x1492/0x1d30 drivers/net/ethernet/intel/e1000/e1000_main.c:4474  e1000_clean+0x43aa/0x5970 drivers/net/ethernet/intel/e1000/e1000_main.c:3819  napi_poll net/core/dev.c:5500  net_rx_action+0x73c/0x1820 net/core/dev.c:5566  __do_softirq+0x4b4/0x8dd kernel/softirq.c:284  invoke_softirq kernel/softirq.c:364  irq_exit+0x203/0x240 kernel/softirq.c:405  exiting_irq+0xe/0x10 ./arch/x86/include/asm/apic.h:638  do_IRQ+0x15e/0x1a0 arch/x86/kernel/irq.c:263  common_interrupt+0x86/0x86 Fixes: d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets") Fixes: d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexander Potapenko <glider@google.com> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18netfilter: nat: Revert "netfilter: nat: convert nat bysrc hash to rhashtable"Florian Westphal2-3/+1
commit e1bf1687740ce1a3598a1c5e452b852ff2190682 upstream. This reverts commit 870190a9ec9075205c0fa795a09fa931694a3ff1. It was not a good idea. The custom hash table was a much better fit for this purpose. A fast lookup is not essential, in fact for most cases there is no lookup at all because original tuple is not taken and can be used as-is. What needs to be fast is insertion and deletion. rhlist removal however requires a rhlist walk. We can have thousands of entries in such a list if source port/addresses are reused for multiple flows, if this happens removal requests are so expensive that deletions of a few thousand flows can take several seconds(!). The advantages that we got from rhashtable are: 1) table auto-sizing 2) multiple locks 1) would be nice to have, but it is not essential as we have at most one lookup per new flow, so even a million flows in the bysource table are not a problem compared to current deletion cost. 2) is easy to add to custom hash table. I tried to add hlist_node to rhlist to speed up rhltable_remove but this isn't doable without changing semantics. rhltable_remove_fast will check that the to-be-deleted object is part of the table and that requires a list walk that we want to avoid. Furthermore, using hlist_node increases size of struct rhlist_head, which in turn increases nf_conn size. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196821 Reported-by: Ivan Babrou <ibobrik@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18tcp/dccp: fix other lockdep splats accessing ireq_optEric Dumazet1-0/+6
[ Upstream commit 06f877d613be3621604c2520ec0351d9fbdca15f ] In my first attempt to fix the lockdep splat, I forgot we could enter inet_csk_route_req() with a freshly allocated request socket, for which refcount has not yet been elevated, due to complex SLAB_TYPESAFE_BY_RCU rules. We either are in rcu_read_lock() section _or_ we own a refcount on the request. Correct RCU verb to use here is rcu_dereference_check(), although it is not possible to prove we actually own a reference on a shared refcount :/ In v2, I added ireq_opt_deref() helper and use in three places, to fix other possible splats. [ 49.844590] lockdep_rcu_suspicious+0xea/0xf3 [ 49.846487] inet_csk_route_req+0x53/0x14d [ 49.848334] tcp_v4_route_req+0xe/0x10 [ 49.850174] tcp_conn_request+0x31c/0x6a0 [ 49.851992] ? __lock_acquire+0x614/0x822 [ 49.854015] tcp_v4_conn_request+0x5a/0x79 [ 49.855957] ? tcp_v4_conn_request+0x5a/0x79 [ 49.858052] tcp_rcv_state_process+0x98/0xdcc [ 49.859990] ? sk_filter_trim_cap+0x2f6/0x307 [ 49.862085] tcp_v4_do_rcv+0xfc/0x145 [ 49.864055] ? tcp_v4_do_rcv+0xfc/0x145 [ 49.866173] tcp_v4_rcv+0x5ab/0xaf9 [ 49.868029] ip_local_deliver_finish+0x1af/0x2e7 [ 49.870064] ip_local_deliver+0x1b2/0x1c5 [ 49.871775] ? inet_del_offload+0x45/0x45 [ 49.873916] ip_rcv_finish+0x3f7/0x471 [ 49.875476] ip_rcv+0x3f1/0x42f [ 49.876991] ? ip_local_deliver_finish+0x2e7/0x2e7 [ 49.878791] __netif_receive_skb_core+0x6d3/0x950 [ 49.880701] ? process_backlog+0x7e/0x216 [ 49.882589] __netif_receive_skb+0x1d/0x5e [ 49.884122] process_backlog+0x10c/0x216 [ 49.885812] net_rx_action+0x147/0x3df Fixes: a6ca7abe53633 ("tcp/dccp: fix lockdep splat in inet_csk_route_req()") Fixes: c92e8c02fe66 ("tcp/dccp: fix ireq->opt races") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kernel test robot <fengguang.wu@intel.com> Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18tcp/dccp: fix ireq->opt racesEric Dumazet1-1/+1
[ Upstream commit c92e8c02fe664155ac4234516e32544bec0f113d ] syzkaller found another bug in DCCP/TCP stacks [1] For the reasons explained in commit ce1050089c96 ("tcp/dccp: fix ireq->pktopts race"), we need to make sure we do not access ireq->opt unless we own the request sock. Note the opt field is renamed to ireq_opt to ease grep games. [1] BUG: KASAN: use-after-free in ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 Read of size 1 at addr ffff8801c951039c by task syz-executor5/3295 CPU: 1 PID: 3295 Comm: syz-executor5 Not tainted 4.14.0-rc4+ #80 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427 ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1135 tcp_send_ack.part.37+0x3bb/0x650 net/ipv4/tcp_output.c:3587 tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3557 __tcp_ack_snd_check+0x2c6/0x4b0 net/ipv4/tcp_input.c:5072 tcp_ack_snd_check net/ipv4/tcp_input.c:5085 [inline] tcp_rcv_state_process+0x2eff/0x4850 net/ipv4/tcp_input.c:6071 tcp_child_process+0x342/0x990 net/ipv4/tcp_minisocks.c:816 tcp_v4_rcv+0x1827/0x2f80 net/ipv4/tcp_ipv4.c:1682 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x40c341 RSP: 002b:00007f469523ec10 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 000000000040c341 RDX: 0000000000000037 RSI: 0000000020004000 RDI: 0000000000000015 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000f4240 R11: 0000000000000293 R12: 00000000004b7fd1 R13: 00000000ffffffff R14: 0000000020000000 R15: 0000000000025000 Allocated by task 3295: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 __do_kmalloc mm/slab.c:3725 [inline] __kmalloc+0x162/0x760 mm/slab.c:3734 kmalloc include/linux/slab.h:498 [inline] tcp_v4_save_options include/net/tcp.h:1962 [inline] tcp_v4_init_req+0x2d3/0x3e0 net/ipv4/tcp_ipv4.c:1271 tcp_conn_request+0xf6d/0x3410 net/ipv4/tcp_input.c:6283 tcp_v4_conn_request+0x157/0x210 net/ipv4/tcp_ipv4.c:1313 tcp_rcv_state_process+0x8ea/0x4850 net/ipv4/tcp_input.c:5857 tcp_v4_do_rcv+0x55c/0x7d0 net/ipv4/tcp_ipv4.c:1482 tcp_v4_rcv+0x2d10/0x2f80 net/ipv4/tcp_ipv4.c:1711 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3306: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kfree+0xca/0x250 mm/slab.c:3820 inet_sock_destruct+0x59d/0x950 net/ipv4/af_inet.c:157 __sk_destruct+0xfd/0x910 net/core/sock.c:1560 sk_destruct+0x47/0x80 net/core/sock.c:1595 __sk_free+0x57/0x230 net/core/sock.c:1603 sk_free+0x2a/0x40 net/core/sock.c:1614 sock_put include/net/sock.h:1652 [inline] inet_csk_complete_hashdance+0xd5/0xf0 net/ipv4/inet_connection_sock.c:959 tcp_check_req+0xf4d/0x1620 net/ipv4/tcp_minisocks.c:765 tcp_v4_rcv+0x17f6/0x2f80 net/ipv4/tcp_ipv4.c:1675 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18tcp: fix tcp_mtu_probe() vs highest_sackEric Dumazet1-3/+3
[ Upstream commit 2b7cda9c35d3b940eb9ce74b30bbd5eb30db493d ] Based on SNMP values provided by Roman, Yuchung made the observation that some crashes in tcp_sacktag_walk() might be caused by MTU probing. Looking at tcp_mtu_probe(), I found that when a new skb was placed in front of the write queue, we were not updating tcp highest sack. If one skb is freed because all its content was copied to the new skb (for MTU probing), then tp->highest_sack could point to a now freed skb. Bad things would then happen, including infinite loops. This patch renames tcp_highest_sack_combine() and uses it from tcp_mtu_probe() to fix the bug. Note that I also removed one test against tp->sacked_out, since we want to replace tp->highest_sack regardless of whatever condition, since keeping a stale pointer to freed skb is a recipe for disaster. Fixes: a47e5a988a57 ("[TCP]: Convert highest_sack to sk_buff to allow direct access") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by: Roman Gushchin <guro@fb.com> Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12netlink: fix nla_put_{u8,u16,u32} for KASANArnd Bergmann1-18/+55
commit b4391db42308c9940944b5d7be5ca4b78fb88dd0 upstream. When CONFIG_KASAN is enabled, the "--param asan-stack=1" causes rather large stack frames in some functions. This goes unnoticed normally because CONFIG_FRAME_WARN is disabled with CONFIG_KASAN by default as of commit 3f181b4d8652 ("lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y"). The kernelci.org build bot however has the warning enabled and that led me to investigate it a little further, as every build produces these warnings: net/wireless/nl80211.c:4389:1: warning: the frame size of 2240 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:1895:1: warning: the frame size of 3776 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:1410:1: warning: the frame size of 2208 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/bridge/br_netlink.c:1282:1: warning: the frame size of 2544 bytes is larger than 2048 bytes [-Wframe-larger-than=] Most of this problem is now solved in gcc-8, which can consolidate the stack slots for the inline function arguments. On older compilers we can add a workaround by declaring a local variable in each function to pass the inline function argument. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12sctp: potential read out of bounds in sctp_ulpevent_type_enabled()Dan Carpenter1-1/+5
[ Upstream commit fa5f7b51fc3080c2b195fa87c7eca7c05e56f673 ] This code causes a static checker warning because Smatch doesn't trust anything that comes from skb->data. I've reviewed this code and I do think skb->data can be controlled by the user here. The sctp_event_subscribe struct has 13 __u8 fields and we want to see if ours is non-zero. sn_type can be any value in the 0-USHRT_MAX range. We're subtracting SCTP_SN_TYPE_BASE which is 1 << 15 so we could read either before the start of the struct or after the end. This is a very old bug and it's surprising that it would go undetected for so long but my theory is that it just doesn't have a big impact so it would be hard to notice. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08netfilter: nf_tables: set pktinfo->thoff at AH header if foundPablo Neira Ayuso1-2/+4
[ Upstream commit 568af6de058cb2b0c5b98d98ffcf37cdc6bc38a7 ] Phil Sutter reports that IPv6 AH header matching is broken. From userspace, nft generates bytecode that expects to find the AH header at NFT_PAYLOAD_TRANSPORT_HEADER both for IPv4 and IPv6. However, pktinfo->thoff is set to the inner header after the AH header in IPv6, while in IPv4 pktinfo->thoff points to the AH header indeed. This behaviour is inconsistent. This patch fixes this problem by updating ipv6_find_hdr() to get the IP6_FH_F_AUTH flag so this function stops at the AH header, so both IPv4 and IPv6 pktinfo->thoff point to the AH header. This is also inconsistent when trying to match encapsulated headers: 1) A packet that looks like IPv4 + AH + TCP dport 22 will *not* match. 2) A packet that looks like IPv6 + AH + TCP dport 22 will match. Reported-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05mac80211: fix VLAN handling with TXQsJohannes Berg1-13/+2
commit 53168215909281a09d3afc6fb51a9d4f81f74d39 upstream. With TXQs, the AP_VLAN interfaces are resolved to their owner AP interface when enqueuing the frame, which makes sense since the frame really goes out on that as far as the driver is concerned. However, this introduces a problem: frames to be encrypted with a VLAN-specific GTK will now be encrypted with the AP GTK, since the information about which virtual interface to use to select the key is taken from the TXQ. Fix this by preserving info->control.vif and using that in the dequeue function. This now requires doing the driver-mapping in the dequeue as well. Since there's no way to filter the frames that are sitting on a TXQ, drop all frames, which may affect other interfaces, when an AP_VLAN is removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20Revert "net: fix percpu memory leaks"Jesper Dangaard Brouer1-6/+1
[ Upstream commit 5a63643e583b6a9789d7a225ae076fb4e603991c ] This reverts commit 1d6119baf0610f813eb9d9580eb4fd16de5b4ceb. After reverting commit 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") then here is no need for this fix-up patch. As percpu_counter is no longer used, it cannot memory leak it any-longer. Fixes: 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") Fixes: 1d6119baf061 ("net: fix percpu memory leaks") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20Revert "net: use lib/percpu_counter API for fragmentation mem accounting"Jesper Dangaard Brouer1-27/+9
[ Upstream commit fb452a1aa3fd4034d7999e309c5466ff2d7005aa ] This reverts commit 6d7b857d541ecd1d9bd997c97242d4ef94b19de2. There is a bug in fragmentation codes use of the percpu_counter API, that can cause issues on systems with many CPUs. The frag_mem_limit() just reads the global counter (fbc->count), without considering other CPUs can have upto batch size (130K) that haven't been subtracted yet. Due to the 3MBytes lower thresh limit, this become dangerous at >=24 CPUs (3*1024*1024/130000=24). The correct API usage would be to use __percpu_counter_compare() which does the right thing, and takes into account the number of (online) CPUs and batch size, to account for this and call __percpu_counter_sum() when needed. We choose to revert the use of the lib/percpu_counter API for frag memory accounting for several reasons: 1) On systems with CPUs > 24, the heavier fully locked __percpu_counter_sum() is always invoked, which will be more expensive than the atomic_t that is reverted to. Given systems with more than 24 CPUs are becoming common this doesn't seem like a good option. To mitigate this, the batch size could be decreased and thresh be increased. 2) The add_frag_mem_limit+sub_frag_mem_limit pairs happen on the RX CPU, before SKBs are pushed into sockets on remote CPUs. Given NICs can only hash on L2 part of the IP-header, the NIC-RXq's will likely be limited. Thus, a fair chance that atomic add+dec happen on the same CPU. Revert note that commit 1d6119baf061 ("net: fix percpu memory leaks") removed init_frag_mem_limit() and instead use inet_frags_init_net(). After this revert, inet_frags_uninit_net() becomes empty. Fixes: 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") Fixes: 1d6119baf061 ("net: fix percpu memory leaks") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20ipv6: fix sparse warning on rt6i_nodeWei Wang1-1/+1
[ Upstream commit 4e587ea71bf924f7dac621f1351653bd41e446cb ] Commit c5cff8561d2d adds rcu grace period before freeing fib6_node. This generates a new sparse warning on rt->rt6i_node related code: net/ipv6/route.c:1394:30: error: incompatible types in comparison expression (different address spaces) ./include/net/ip6_fib.h:187:14: error: incompatible types in comparison expression (different address spaces) This commit adds "__rcu" tag for rt6i_node and makes sure corresponding rcu API is used for it. After this fix, sparse no longer generates the above warning. Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node") Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20ipv6: add rcu grace period before freeing fib6_nodeWei Wang1-1/+29
[ Upstream commit c5cff8561d2d0006e972bd114afd51f082fee77c ] We currently keep rt->rt6i_node pointing to the fib6_node for the route. And some functions make use of this pointer to dereference the fib6_node from rt structure, e.g. rt6_check(). However, as there is neither refcount nor rcu taken when dereferencing rt->rt6i_node, it could potentially cause crashes as rt->rt6i_node could be set to NULL by other CPUs when doing a route deletion. This patch introduces an rcu grace period before freeing fib6_node and makes sure the functions that dereference it takes rcu_read_lock(). Note: there is no "Fixes" tag because this bug was there in a very early stage. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30net_sched: fix order of queue length updates in qdisc_replace()Konstantin Khlebnikov1-1/+4
[ Upstream commit 68a66d149a8c78ec6720f268597302883e48e9fa ] This important to call qdisc_tree_reduce_backlog() after changing queue length. Parent qdisc should deactivate class in ->qlen_notify() called from qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero. Missed class deactivations leads to crashes/warnings at picking packets from empty qdisc and corrupting state at reactivating this class in future. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 86a7996cc8a0 ("net_sched: introduce qdisc_replace() helper") Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30ipv4: better IP_MAX_MTU enforcementEric Dumazet1-2/+2
[ Upstream commit c780a049f9bf442314335372c9abc4548bfe3e44 ] While working on yet another syzkaller report, I found that our IP_MAX_MTU enforcements were not properly done. gcc seems to reload dev->mtu for min(dev->mtu, IP_MAX_MTU), and final result can be bigger than IP_MAX_MTU :/ This is a problem because device mtu can be changed on other cpus or threads. While this patch does not fix the issue I am working on, it is probably worth addressing it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11wext: handle NULL extra data in iwe_stream_add_point betterArnd Bergmann1-1/+2
commit 93be2b74279c15c2844684b1a027fdc71dd5d9bf upstream. gcc-7 complains that wl3501_cs passes NULL into a function that then uses the argument as the input for memcpy: drivers/net/wireless/wl3501_cs.c: In function 'wl3501_get_scan': include/net/iw_handler.h:559:3: error: argument 2 null where non-null expected [-Werror=nonnull] memcpy(stream + point_len, extra, iwe->u.data.length); This works fine here because iwe->u.data.length is guaranteed to be 0 and the memcpy doesn't actually have an effect. Making the length check explicit avoids the warning and should have no other effect here. Also check the pointer itself, since otherwise we get warnings elsewhere in the code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11sctp: fix the check for _sctp_walk_params and _sctp_walk_errorsXin Long1-2/+2
[ Upstream commit 6b84202c946cd3da3a8daa92c682510e9ed80321 ] Commit b1f5bfc27a19 ("sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()") tried to fix the issue that it may overstep the chunk end for _sctp_walk_{params, errors} with 'chunk_end > offset(length) + sizeof(length)'. But it introduced a side effect: When processing INIT, it verifies the chunks with 'param.v == chunk_end' after iterating all params by sctp_walk_params(). With the check 'chunk_end > offset(length) + sizeof(length)', it would return when the last param is not yet accessed. Because the last param usually is fwdtsn supported param whose size is 4 and 'chunk_end == offset(length) + sizeof(length)' This is a badly issue even causing sctp couldn't process 4-shakes. Client would always get abort when connecting to server, due to the failure of INIT chunk verification on server. The patch is to use 'chunk_end <= offset(length) + sizeof(length)' instead of 'chunk_end < offset(length) + sizeof(length)' for both _sctp_walk_params and _sctp_walk_errors. Fixes: b1f5bfc27a19 ("sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()Alexander Potapenko1-0/+4
[ Upstream commit b1f5bfc27a19f214006b9b4db7b9126df2dfdf5a ] If the length field of the iterator (|pos.p| or |err|) is past the end of the chunk, we shouldn't access it. This bug has been detected by KMSAN. For the following pair of system calls: socket(PF_INET6, SOCK_STREAM, 0x84 /* IPPROTO_??? */) = 3 sendto(3, "A", 1, MSG_OOB, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = 1 the tool has reported a use of uninitialized memory: ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_rcv+0x17b8/0x43b0 CPU: 1 PID: 2940 Comm: probe Not tainted 4.11.0-rc5+ #2926 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x172/0x1c0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927 __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469 __sctp_rcv_init_lookup net/sctp/input.c:1074 __sctp_rcv_lookup_harder net/sctp/input.c:1233 __sctp_rcv_lookup net/sctp/input.c:1255 sctp_rcv+0x17b8/0x43b0 net/sctp/input.c:170 sctp6_rcv+0x32/0x70 net/sctp/ipv6.c:984 ip6_input_finish+0x82f/0x1ee0 net/ipv6/ip6_input.c:279 NF_HOOK ./include/linux/netfilter.h:257 ip6_input+0x239/0x290 net/ipv6/ip6_input.c:322 dst_input ./include/net/dst.h:492 ip6_rcv_finish net/ipv6/ip6_input.c:69 NF_HOOK ./include/linux/netfilter.h:257 ipv6_rcv+0x1dbd/0x22e0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x2f6f/0x3a20 net/core/dev.c:4208 __netif_receive_skb net/core/dev.c:4246 process_backlog+0x667/0xba0 net/core/dev.c:4866 napi_poll net/core/dev.c:5268 net_rx_action+0xc95/0x1590 net/core/dev.c:5333 __do_softirq+0x485/0x942 kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902 </IRQ> do_softirq kernel/softirq.c:328 __local_bh_enable_ip+0x25b/0x290 kernel/softirq.c:181 local_bh_enable+0x37/0x40 ./include/linux/bottom_half.h:31 rcu_read_unlock_bh ./include/linux/rcupdate.h:931 ip6_finish_output2+0x19b2/0x1cf0 net/ipv6/ip6_output.c:124 ip6_finish_output+0x764/0x970 net/ipv6/ip6_output.c:149 NF_HOOK_COND ./include/linux/netfilter.h:246 ip6_output+0x456/0x520 net/ipv6/ip6_output.c:163 dst_output ./include/net/dst.h:486 NF_HOOK ./include/linux/netfilter.h:257 ip6_xmit+0x1841/0x1c00 net/ipv6/ip6_output.c:261 sctp_v6_xmit+0x3b7/0x470 net/sctp/ipv6.c:225 sctp_packet_transmit+0x38cb/0x3a20 net/sctp/output.c:632 sctp_outq_flush+0xeb3/0x46e0 net/sctp/outqueue.c:885 sctp_outq_uncork+0xb2/0xd0 net/sctp/outqueue.c:750 sctp_side_effects net/sctp/sm_sideeffect.c:1773 sctp_do_sm+0x6962/0x6ec0 net/sctp/sm_sideeffect.c:1147 sctp_primitive_ASSOCIATE+0x12c/0x160 net/sctp/primitive.c:88 sctp_sendmsg+0x43e5/0x4f90 net/sctp/socket.c:1954 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 do_syscall_64+0xe6/0x130 arch/x86/entry/common.c:285 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246 RIP: 0033:0x401133 RSP: 002b:00007fff6d99cd38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000401133 RDX: 0000000000000001 RSI: 0000000000494088 RDI: 0000000000000003 RBP: 00007fff6d99cd90 R08: 00007fff6d99cd50 R09: 000000000000001c R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004063d0 R14: 0000000000406460 R15: 0000000000000000 origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:211 slab_alloc_node mm/slub.c:2743 __kmalloc_node_track_caller+0x200/0x360 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x26b/0x840 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:933 sctp_packet_transmit+0x31e/0x3a20 net/sctp/output.c:570 sctp_outq_flush+0xeb3/0x46e0 net/sctp/outqueue.c:885 sctp_outq_uncork+0xb2/0xd0 net/sctp/outqueue.c:750 sctp_side_effects net/sctp/sm_sideeffect.c:1773 sctp_do_sm+0x6962/0x6ec0 net/sctp/sm_sideeffect.c:1147 sctp_primitive_ASSOCIATE+0x12c/0x160 net/sctp/primitive.c:88 sctp_sendmsg+0x43e5/0x4f90 net/sctp/socket.c:1954 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 do_syscall_64+0xe6/0x130 arch/x86/entry/common.c:285 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246 ================================================================== Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21net: ipv6: Compare lwstate in detecting duplicate nexthopsDavid Ahern1-0/+8
commit f06b7549b79e29a672336d4e134524373fb7a232 upstream. Lennert reported a failure to add different mpls encaps in a multipath route: $ ip -6 route add 1234::/16 \ nexthop encap mpls 10 via fe80::1 dev ens3 \ nexthop encap mpls 20 via fe80::1 dev ens3 RTNETLINK answers: File exists The problem is that the duplicate nexthop detection does not compare lwtunnel configuration. Add it. Fixes: 19e42e451506 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by: David Ahern <dsahern@gmail.com> Reported-by: João Taveira Araújo <joao.taveira@gmail.com> Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Tested-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21vxlan: fix hlist corruptionJiri Benc1-1/+9
[ Upstream commit 69e766612c4bcb79e19cebed9eed61d4222c1d47 ] It's not a good idea to add the same hlist_node to two different hash lists. This leads to various hard to debug memory corruptions. Fixes: b1be00a6c39f ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05xfrm: fix stack access out of bounds with CONFIG_XFRM_SUB_POLICYSabrina Dubroca1-10/+0
commit 9b3eb54106cf6acd03f07cf0ab01c13676a226c2 upstream. When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for that dst. Unfortunately, the code that allocates and fills this copy doesn't care about what type of flowi (flowi, flowi4, flowi6) gets passed. In multiple code paths (from raw_sendmsg, from TCP when replying to a FIN, in vxlan, geneve, and gre), the flowi that gets passed to xfrm is actually an on-stack flowi4, so we end up reading stuff from the stack past the end of the flowi4 struct. Since xfrm_dst->origin isn't used anywhere following commit ca116922afa8 ("xfrm: Eliminate "fl" and "pol" args to xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used either, so get rid of that too. Fixes: 9d6ec938019c ("ipv4: Use flowi4 in public route lookup interfaces.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17ipv6: fix flow labels when the traffic class is non-0Dimitris Michailidis1-0/+5
[ Upstream commit 90427ef5d2a4b9a24079889bf16afdcdaebc4240 ] ip6_make_flowlabel() determines the flow label for IPv6 packets. It's supposed to be passed a flow label, which it returns as is if non-0 and in some other cases, otherwise it calculates a new value. The problem is callers often pass a flowi6.flowlabel, which may also contain traffic class bits. If the traffic class is non-0 ip6_make_flowlabel() mistakes the non-0 it gets as a flow label and returns the whole thing. Thus it can return a 'flow label' longer than 20b and the low 20b of that is typically 0 resulting in packets with 0 label. Moreover, different packets of a flow may be labeled differently. For a TCP flow with ECN non-payload and payload packets get different labels as exemplified by this pair of consecutive packets: (pure ACK) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 0001 1100 1110 0100 1001 = Flow Label: 0x1ce49 Payload Length: 32 Next Header: TCP (6) (payload) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 0000 0000 0000 0000 0000 = Flow Label: 0x00000 Payload Length: 688 Next Header: TCP (6) This patch allows ip6_make_flowlabel() to be passed more than just a flow label and has it extract the part it really wants. This was simpler than modifying the callers. With this patch packets like the above become Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 32 Next Header: TCP (6) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 688 Next Header: TCP (6) Signed-off-by: Dimitris Michailidis <dmichail@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14net: ping: do not abuse udp_poll()Eric Dumazet1-0/+1
[ Upstream commit 77d4b1d36926a9b8387c6b53eeba42bcaaffcea3 ] Alexander reported various KASAN messages triggered in recent kernels The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Sasha Levin <alexander.levin@verizon.com> Cc: Solar Designer <solar@openwall.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Lorenzo Colitti <lorenzo@google.com> Acked-By: Lorenzo Colitti <lorenzo@google.com> Tested-By: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-07ipv4: add reference counting to metricsEric Dumazet2-6/+12
[ Upstream commit 3fb07daff8e99243366a081e5129560734de4ada ] Andrey Konovalov reported crashes in ipv4_mtu() I could reproduce the issue with KASAN kernels, between 10.246.7.151 and 10.246.7.152 : 1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 & 2) At the same time run following loop : while : do ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500 ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500 done Cong Wang attempted to add back rt->fi in commit 82486aa6f1b9 ("ipv4: restore rt->fi for reference counting") but this proved to add some issues that were complex to solve. Instead, I suggested to add a refcount to the metrics themselves, being a standalone object (in particular, no reference to other objects) I tried to make this patch as small as possible to ease its backport, instead of being super clean. Note that we believe that only ipv4 dst need to take care of the metric refcount. But if this is wrong, this patch adds the basic infrastructure to extend this to other families. Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang for his efforts on this problem. Fixes: 2860583fe840 ("ipv4: Kill rt->fi") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notfWANG Cong1-0/+2
[ Upstream commit 242d3a49a2a1a71d8eb9f953db1bcaa9d698ce00 ] For each netns (except init_net), we initialize its null entry in 3 places: 1) The template itself, as we use kmemdup() 2) Code around dst_init_metrics() in ip6_route_net_init() 3) ip6_route_dev_notify(), which is supposed to initialize it after loopback registers Unfortunately the last one still happens in a wrong order because we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to net->loopback_dev's idev, thus we have to do that after we add idev to loopback. However, this notifier has priority == 0 same as ipv6_dev_notf, and ipv6_dev_notf is registered after ip6_route_dev_notifier so it is called actually after ip6_route_dev_notifier. This is similar to commit 2f460933f58e ("ipv6: initialize route null entry in addrconf_init()") which fixes init_net. Fix it by picking a smaller priority for ip6_route_dev_notifier. Also, we have to release the refcnt accordingly when unregistering loopback_dev because device exit functions are called before subsys exit functions. Acked-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14ipv6: initialize route null entry in addrconf_init()WANG Cong1-0/+1
[ Upstream commit 2f460933f58eee3393aba64f0f6d14acb08d1724 ] Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev since it is always NULL. This is clearly wrong, we have code to initialize it to loopback_dev, unfortunately the order is still not correct. loopback_dev is registered very early during boot, we lose a chance to re-initialize it in notifier. addrconf_init() is called after ip6_route_init(), which means we have no chance to correct it. Fix it by moving this initialization explicitly after ipv6_add_dev(init_net.loopback_dev) in addrconf_init(). Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-18tcp: don't annotate mark on control socket from tcp_v6_send_response()Pablo Neira1-1/+1
commit 92e55f412cffd016cc245a74278cb4d7b89bb3bc upstream. Unlike ipv4, this control socket is shared by all cpus so we cannot use it as scratchpad area to annotate the mark that we pass to ip6_xmit(). Add a new parameter to ip6_xmit() to indicate the mark. The SCTP socket family caches the flowi6 structure in the sctp_transport structure, so we cannot use to carry the mark unless we later on reset it back, which I discarded since it looks ugly to me. Fixes: bf99b4ded5f8 ("tcp: fix mark propagation with fwmark_reflect enabled") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-18lwtunnel: valid encap attr check should return 0 when lwtunnel is disabledDavid Ahern1-1/+4
[ Upstream commit 2bd137de531367fb573d90150d1872cb2a2095f7 ] An error was reported upgrading to 4.9.8: root@Typhoon:~# ip route add default table 210 nexthop dev eth0 via 10.68.64.1 weight 1 nexthop dev eth0 via 10.68.64.2 weight 1 RTNETLINK answers: Operation not supported The problem occurs when CONFIG_LWTUNNEL is not enabled and a multipath route is submitted. The point of lwtunnel_valid_encap_type_attr is catch modules that need to be loaded before any references are taken with rntl held. With CONFIG_LWTUNNEL disabled, there will be no modules to load so the lwtunnel_valid_encap_type_attr stub should just return 0. Fixes: 9ed59592e3e3 ("lwtunnel: fix autoload of lwt modules") Reported-by: pupilla@libero.it Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-18netlabel: out of bound access in cipso_v4_validate()Eric Dumazet1-0/+4
[ Upstream commit d71b7896886345c53ef1d84bda2bc758554f5d61 ] syzkaller found another out of bound access in ip_options_compile(), or more exactly in cipso_v4_validate() Fixes: 20e2a8648596 ("cipso: handle CIPSO options correctly when NetLabel is disabled") Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paul Moore <paul@paul-moore.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-04lwtunnel: Fix oops on state free after encap module unloadRobert Shearman1-4/+1
[ Upstream commit 85c814016ce3b371016c2c054a905fa2492f5a65 ] When attempting to free lwtunnel state after the module for the encap has been unloaded an oops occurs: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: lwtstate_free+0x18/0x40 [..] task: ffff88003e372380 task.stack: ffffc900001fc000 RIP: 0010:lwtstate_free+0x18/0x40 RSP: 0018:ffff88003fd83e88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88002bbb3380 RCX: ffff88000c91a300 [..] Call Trace: <IRQ> free_fib_info_rcu+0x195/0x1a0 ? rt_fibinfo_free+0x50/0x50 rcu_process_callbacks+0x2d3/0x850 ? rcu_process_callbacks+0x296/0x850 __do_softirq+0xe4/0x4cb irq_exit+0xb0/0xc0 smp_apic_timer_interrupt+0x3d/0x50 apic_timer_interrupt+0x93/0xa0 [..] Code: e8 6e c6 fc ff 89 d8 5b 5d c3 bb de ff ff ff eb f4 66 90 66 66 66 66 90 55 48 89 e5 53 0f b7 07 48 89 fb 48 8b 04 c5 00 81 d5 81 <48> 8b 40 08 48 85 c0 74 13 ff d0 48 8d 7b 20 be 20 00 00 00 e8 The problem is after the module for the encap can be unloaded the corresponding ops is removed and is thus NULL here. Modules implementing lwtunnel ops should not be allowed to unload while there is state alive using those ops, so grab the module reference for the ops on creating lwtunnel state and of course release the reference when freeing the state. Fixes: 1104d9ba443a ("lwtunnel: Add destroy state operation") Signed-off-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-04net: Specify the owning module for lwtunnel opsRobert Shearman1-0/+2
[ Upstream commit 88ff7334f25909802140e690c0e16433e485b0a0 ] Modules implementing lwtunnel ops should not be allowed to unload while there is state alive using those ops, so specify the owning module for all lwtunnel ops. Signed-off-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-04lwtunnel: fix autoload of lwt modulesDavid Ahern1-0/+11
[ Upstream commit 9ed59592e3e379b2e9557dc1d9e9ec8fcbb33f16] Trying to add an mpls encap route when the MPLS modules are not loaded hangs. For example: CONFIG_MPLS=y CONFIG_NET_MPLS_GSO=m CONFIG_MPLS_ROUTING=m CONFIG_MPLS_IPTUNNEL=m $ ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2 The ip command hangs: root 880 826 0 21:25 pts/0 00:00:00 ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2 $ cat /proc/880/stack [<ffffffff81065a9b>] call_usermodehelper_exec+0xd6/0x134 [<ffffffff81065efc>] __request_module+0x27b/0x30a [<ffffffff814542f6>] lwtunnel_build_state+0xe4/0x178 [<ffffffff814aa1e4>] fib_create_info+0x47f/0xdd4 [<ffffffff814ae451>] fib_table_insert+0x90/0x41f [<ffffffff814a8010>] inet_rtm_newroute+0x4b/0x52 ... modprobe is trying to load rtnl-lwt-MPLS: root 881 5 0 21:25 ? 00:00:00 /sbin/modprobe -q -- rtnl-lwt-MPLS and it hangs after loading mpls_router: $ cat /proc/881/stack [<ffffffff81441537>] rtnl_lock+0x12/0x14 [<ffffffff8142ca2a>] register_netdevice_notifier+0x16/0x179 [<ffffffffa0033025>] mpls_init+0x25/0x1000 [mpls_router] [<ffffffff81000471>] do_one_initcall+0x8e/0x13f [<ffffffff81119961>] do_init_module+0x5a/0x1e5 [<ffffffff810bd070>] load_module+0x13bd/0x17d6 ... The problem is that lwtunnel_build_state is called with rtnl lock held preventing mpls_init from registering. Given the potential references held by the time lwtunnel_build_state it can not drop the rtnl lock to the load module. So, extract the module loading code from lwtunnel_build_state into a new function to validate the encap type. The new function is called while converting the user request into a fib_config which is well before any table, device or fib entries are examined. Fixes: 745041e2aaf1 ("lwtunnel: autoload of lwt modules") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09cfg80211/mac80211: fix BSS leaks when abandoning assoc attemptsJohannes Berg1-0/+11
commit e6f462df9acd2a3295e5d34eb29e2823220cf129 upstream. When mac80211 abandons an association attempt, it may free all the data structures, but inform cfg80211 and userspace about it only by sending the deauth frame it received, in which case cfg80211 has no link to the BSS struct that was used and will not cfg80211_unhold_bss() it. Fix this by providing a way to inform cfg80211 of this with the BSS entry passed, so that it can clean up properly, and use this ability in the appropriate places in mac80211. This isn't ideal: some code is more or less duplicated and tracing is missing. However, it's a fairly small change and it's thus easier to backport - cleanups can come later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-18 02:50:07 +0300