summaryrefslogtreecommitdiff
path: root/include/net/cfg80211.h
AgeCommit message (Collapse)AuthorFilesLines
2014-11-26cfg80211: clean up beacon loss CQM eventJohannes Berg1-0/+9
Having it as a sub-event for RSSI thresholds is very ugly, but luckily no userspace actually uses the events yet. Move the event to its own function call internally and to its own event attribute in nl80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-26cfg80211: refactor the various CQM event sending codeJohannes Berg1-27/+27
Much of the code can be shared by moving it into helper functions for the CQM event sending. Also move the code closer together, even in the header file. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: allow drivers to support random MAC addresses for scanJohannes Berg1-0/+25
Add the necessary feature flags and a scan flag to support using random MAC addresses for scan while unassociated. The configuration for this supports an arbitrary MAC address value and mask, so that any kind of configuration (e.g. fixed OUI or full 46-bit random) can be requested. Full 46-bit random is the default when no other configuration is passed. Also add a small helper function to use the addr/mask correctly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: add wowlan net-detect supportLuciano Coelho1-0/+41
Add a new WoWLAN API to enable net-detect as a wake up trigger. Net-detect allows the device to scan in the background while the host is asleep to wake up the host system when a matching network is found. Reuse the scheduled scan attributes to specify how the scan is performed while suspended and the matches that will trigger a wake event. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: introduce TDLS channel switch commandsArik Nemtsov1-0/+14
Introduce commands to initiate and cancel TDLS channel-switching. Once TDLS channel-switching is started, the lower level driver is responsible for continually initiating channel-switch operations and returning to the base (AP) channel to listen for beacons from time to time. Upon cancellation of the channel-switch all communication between the relevant TDLS peers will continue on the base channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10cfg80211: add channel switch started notificationLuciano Coelho1-0/+14
Add a new NL80211_CH_SWITCH_STARTED_NOTIFY message that can be sent to the userspace when a channel switch process has started. This allows userspace to take action, for instance, by requesting other interfaces to switch channel as necessary. This patch introduces a function that allows the drivers to send this notification. It should be used when the driver starts processing a channel switch initiated by a remote device (eg. when a STA receives a CSA from the AP) and when it successfully starts a userspace-triggered channel switch (eg. when hostapd triggers a channel swith in the AP). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04cfg80211: 802.11p OCB mode handlingRostislav Lisovy1-0/+19
This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-27cfg80211: support configuring vif mac addr on createBen Greear1-3/+6
This is useful when creating virtual interfaces. Keeps udev from mucking with things it shouldn't, since the default MAC is never seen by udev when specified on the cmd-line during creation. Signed-off-by: Ben Greear <greearb@candelatech.com> [check for feature flag in nl80211 to force drivers to set it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-27cfg80211: support creating wiphy with suggested nameBen Greear1-1/+22
Kernel will attempt to use the name if it is supplied, but if name cannot be used for some reason, the default phyX name will be used instead. Signed-off-by: Ben Greear <greearb@candelatech.com> [while at it, use wiphy_name() instead of dev_name(), fix format string issue reported by Kees Cook] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22cfg80211: make WMM TSPEC support flag an nl80211 feature flagJohannes Berg1-5/+1
During the review of the corresponding wpa_supplicant patches we noticed that the only way for it to detect that this functionality is supported currently is to check for the command support. This can be misleading though, as the command was also designed to, in the future, support pure 802.11 TSPECs. Expose the WMM-TSPEC feature flag to nl80211 so later we can also expose an 802.11-TSPEC feature flag (if needed) to differentiate the two cases. Note: this change isn't needed in 3.18 as there's no driver there yet that supports the functionality at all. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-20cfg80211: Specify frame and reason code for NL80211_CMD_DEL_STATIONJouni Malinen1-0/+5
The optional NL80211_ATTR_MGMT_SUBTYPE and NL80211_ATTR_REASON_CODE attributes can now be included in NL80211_CMD_DEL_STATION to indicate to the driver which frame (Deauthentication/Disassociation) and reason code in that frame should be used to indicate removal to the specific station. This is used by drivers that implement AP SME and generate those frames internally. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-20cfg80211: Convert del_station() callback to use a param structJouni Malinen1-2/+13
This makes it easier to add new parameters for the del_station calls without having to modify all drivers that use this. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-09cfg80211: add ops to query mesh proxy path tableHenning Rogge1-0/+7
Add two new cfg80211 operations for querying a table with proxied mesh paths. Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11cfg80211: allow requesting SMPS mode on ap startEliad Peller1-0/+2
Add feature bits to indicate device support for static-smps and dynamic-smps modes. Add a new NL80211_ATTR_SMPS_MODE attribue to allow configuring the smps mode to be used by the ap (e.g. configuring to ap to dynamic smps mode will reduce power consumption while having minor effect on throughput) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11cfg80211/mac80211: add wmm info to assoc eventEliad Peller1-1/+3
Userspace might need to know what queues are configured for uapsd (e.g. for setting proper default values in tspecs). Add this bitmap to the association event (inside wmm nested attribute) Add additional parameter to cfg80211_rx_assoc_resp, and update its callers. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11cfg80211: add WMM traffic stream APIJohannes Berg1-1/+22
Add nl80211 and driver API to validate, add and delete traffic streams with appropriate settings. The API calls for userspace doing the action frame handshake with the peer, and then allows only to set up the parameters in the driver. To avoid setting up a session only to tear it down again, the validate API is provided, but the real usage later can still fail so userspace must be prepared for that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11cfg80211: don't put kek/kck/replay counter on the stackJohannes Berg1-6/+4
There's no need to put the values on the stack, just pass a pointer to the data in the nl80211 message. This reduces stack usage and avoids potential issues with putting sensitive data on the stack. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-05cfg80211: enable dynack through nl80211Lorenzo Bianconi1-0/+2
Enable ACK timeout estimation algorithm (dynack) using mac80211 set_coverage_class API. Dynack is activated passing coverage class equals to -1 to lower drivers and it is automatically disabled setting valid value for coverage class. Define NL80211_ATTR_WIPHY_DYN_ACK flag attribute to enable dynack from userspace. In order to activate dynack NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower drivers to indicate dynack capability. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-05nl80211: Add flag attribute for RRM connectionsAssaf Krauss1-0/+2
Add a flag attribute to use in associations, for tagging the target connection as supporting RRM. It is the responsibility of upper layers to set this flag only if both the underlying device, and the target network indeed support RRM. To be used in ASSOCIATE and CONNECT commands. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-05cfg80211: add Intel Mobile Communications copyrightJohannes Berg1-0/+1
Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26cfg80211: allow passing frame type to cfg80211_inform_bss()Johannes Berg1-2/+18
When using the cfg80211_inform_bss[_width]() functions drivers cannot currently indicate whether the data was received in a beacon or probe response. Fix that by passing a new enum that indicates such (or unknown). For good measure, use it in ath6kl. Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> [ath6kl] Acked-by: Arend van Spriel <arend@broadcom.com> [brcmfmac] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26cfg80211: clarify BSS probe response vs. beacon dataJohannes Berg1-0/+2
There are a few possible cases of where BSS data came from: 1) only a beacon has been received 2) only a probe response has been received 3) the driver didn't report what it received (this happens when using cfg80211_inform_bss[_width]()) 4) both probe response and beacon data has been received Unfortunately, in the userspace API, a few things weren't there: a) there was no way to differentiate cases 1) and 4) above without comparing the data of the IEs b) the TSF was always from the last frame, instead of being exposed for beacon/probe response separately like IEs Fix this by i) exporting a new flag attribute that indicates whether or not probe response data has been received - this addresses (a) ii) exporting a BEACON_TSF attribute that holds the beacon's TSF if a beacon has been received iii) not exporting the beacon attributes in case (3) above as that would just lead userspace into thinking the data actually came from a beacon when that isn't clear To implement this, track inside the IEs struct whether or not it (definitely) came from a beacon. Reported-by: William Seto Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26cfg80211: remove @gfp parameter from cfg80211_rx_mgmt()Vladimir Kondratiev1-2/+1
In the cfg80211_rx_mgmt(), parameter @gfp was used for the memory allocation. But, memory get allocated under spin_lock_bh(), this implies atomic context. So, one can't use GFP_KERNEL, only variants with no __GFP_WAIT. Actually, in all occurrences GFP_ATOMIC is used (wil6210 use GFP_KERNEL by mistake), and it should be this way or warning triggered in the memory allocation code. Remove @gfp parameter as no actual choice exist, and use hard coded GFP_ATOMIC for memory allocation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25cfg80211: remove channel_switch combination checkMichal Kazior1-1/+6
Driver is now responsible for veryfing if the switch is possible. Since this is inherently tricky driver may decide to disconnect an interface later with cfg80211_stop_iface(). This doesn't mean driver can accept everything. It should do it's best to verify requests and reject them as soon as possible. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23cfg80211: pass TDLS initiator in tdls_mgmt operationsArik Nemtsov1-1/+1
The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23cfg80211: make ethtool the driver's responsibilityJohannes Berg1-25/+4
Currently, cfg80211 tries to implement ethtool, but that doesn't really scale well, with all the different operations. Make the lower-level driver responsible for it, which currently only has an effect on mac80211. It will similarly not scale well at that level though, since mac80211 also has many drivers. To cleanly implement this in mac80211, introduce a new file and move some code to appropriate places. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville1-58/+133
2014-05-22cfg80211: allow RSSI compensationEmmanuel Grumbach1-0/+7
Channels in 2.4GHz band overlap, this means that if we send a probe request on channel 1 and then move to channel 2, we will hear the probe response on channel 2. In this case, the RSSI will be lower than if we had heard it on the channel on which it was sent (1 in this case). The firmware / low level driver can parse the channel in the DS IE or HT IE and compensate the RSSI so that it will still have a valid value even if we heard the frame on an adjacent channel. This can be done up to a certain offset. Add this offset as a configuration for the low level driver. A low level driver that can compensate the low RSSI in this case should assign the maximal offset for which the RSSI value is still valid. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-21cfg80211: implement cfg80211_get_station cfg80211 APIAntonio Quartulli1-0/+13
Implement and export the new cfg80211_get_station() API. This utility can be used by other kernel modules to obtain detailed information about a given wireless station. It will be in particular useful to batman-adv which will implement a wireless rate based metric. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-20cfg80211: export expected throughput through get_station()Antonio Quartulli1-28/+34
Users may need information about the expected throughput towards a given peer. This value is supposed to consider the size overhead generated by the 802.11 header. This value is exported in kbps through the get_station() API by including it into the station_info object. Moreover, it is sent to user space when replying to the nl80211 GET_STATION command. This information will be useful to the batman-adv module which will use it for its new metric computation. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19cfg80211: constify wowlan/coalesce mask/pattern pointersJohannes Berg1-1/+1
This requires changing the nl80211 parsing code a bit to use intermediate pointers for the allocation, but clarifies the API towards the drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19cfg80211: constify more pointers in the cfg80211 APIJohannes Berg1-11/+12
This also propagates through the drivers. The orinoco driver uses the cfg80211 API structs for internal bookkeeping, and so needs a (void *) cast that removes the const - but that's OK because it allocates those pointers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19cfg80211: constify MAC addresses in cfg80211 opsJohannes Berg1-14/+15
This propagates through all the drivers and mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19cfg80211: add documentation for max_num_csa_countersLuciano Coelho1-5/+5
Move the comment in the structure to a description of the max_num_csa_counters field in the docbook area. This fixes a warning when building htmldocs (at least): Warning(include/net/cfg80211.h:3064): No description found for parameter 'max_num_csa_counters' Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15cfg80211: Support multiple CSA countersAndrei Otcheretianski1-3/+15
Change the type of NL80211_ATTR_CSA_C_OFF_BEACON and NL80211_ATTR_CSA_C_OFF_PRESP to be NLA_BINARY which allows userspace to use beacons and probe responses with multiple CSA counters. This isn't breaking the API since userspace can continue to use nla_put_u16 for this attributes, which is equivalent to a single element u16 array. In addition advertise max number of supported CSA counters. This is needed when using CSA and eCSA IEs together. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15cfg80211: Add API to update CSA counters in mgmt framesAndrei Otcheretianski1-0/+4
Add NL80211_ATTR_CSA_C_OFFSETS_TX which holds an array of offsets to the CSA counters which should be updated when sending a management frames with NL80211_CMD_FRAME. This API should be used by the drivers that wish to keep the CSA counter updated in probe responses, but do not implement probe response offloading and so, do not use ieee80211_proberesp_get function. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-13Merge branch 'master' of ↵John W. Linville1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-05-13cfg80211: allow restricting supported dfs regionsFelix Fietkau1-0/+2
At the moment, the ath9k/ath10k DFS module only supports detecting ETSI radar patterns. Add a bitmap in the interface combinations, indicating which DFS regions are supported by the detector. If unset, support for all regions is assumed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-09mac80211: handle failed restart/resume betterJohannes Berg1-0/+14
When the driver fails during HW restart or resume, the whole stack goes into a very confused state with interfaces being up while the hardware is down etc. Address this by shutting down everything; we'll run into a lot of warnings in the process but that's better than having the whole stack get messed up. Reviewed-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-08cfg80211: fix docbook warningLuciano Coelho1-1/+1
When trying to generate documentation, at least xmldocs, we get the following warning: Warning(include/net/cfg80211.h:461): No description found for parameter 'nl80211_iftype' Fix it by adding the iftype argument name to the cfg80211_chandef_dfs_required() function declaration. Reported-and-tested-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-06cfg80211: export interface stopping functionMichal Kazior1-0/+15
This exports a new cfg80211_stop_iface() function. This is intended for driver internal interface combination management and channel switching. Due to locking issues (it re-enters driver) the call is asynchronous and uses cfg80211 event list/worker. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-05cfg80211: add cfg80211_sched_scan_stopped_rtnlEliad Peller1-0/+12
Add locked-version for cfg80211_sched_scan_stopped. This is used for some users that might want to call it when rtnl is already locked. Fixes: d43c6b6 ("mac80211: reschedule sched scan after HW restart") Cc: stable@vger.kernel.org (3.14+) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-28cfg80211: Dynamic channel bandwidth changes in AP modeJouni Malinen1-0/+8
This extends NL80211_CMD_SET_CHANNEL to allow dynamic channel bandwidth changes in AP mode (including P2P GO) during a lifetime of the BSS. This can be used to implement, e.g., HT 20/40 MHz co-existence rules on the 2.4 GHz band. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: Add attributes describing prohibited channel bandwidthRostislav Lisovy1-0/+6
Since there are frequency bands (e.g. 5.9GHz) allowing channels with only 10 or 5 MHz bandwidth, this patch adds attributes that allow keeping track about this information. When channel attributes are reported to user-space, make sure to not break old tools, i.e. if the 'split wiphy dump' is enabled, report the extra attributes (if present) describing the bandwidth restrictions. If the 'split wiphy dump' is not enabled, completely omit those channels that have flags set to either IEEE80211_CHAN_NO_10MHZ or IEEE80211_CHAN_NO_20MHZ. Add the check for new bandwidth restriction flags in cfg80211_chandef_usable() to comply with the restrictions. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: allow drivers to iterate over matching combinationsMichal Kazior1-0/+27
The patch splits cfg80211_check_combinations() into an iterator function and a simple iteration user. This makes it possible for drivers to asses how many channels can use given iftype setup. This in turn can be used for future multi-interface/multi-channel channel switching. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: update comment about WIPHY_FLAG_CUSTOM_REGULATORYKalle Valo1-1/+1
Commit a2f73b6c5db3c ("cfg80211: move regulatory flags to their own variable") renamed WIPHY_FLAG_CUSTOM_REGULATORY to REGULATORY_CUSTOM_REG, but missed to update one comment. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: move interface counting for combination check to mac80211Luciano Coelho1-2/+0
Move the counting part of the interface combination check from cfg80211 to mac80211. This is needed to simplify locking when the driver has to perform a combination check by itself (eg. with channel-switch). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: refactor cfg80211_chandef_dfs_required()Luciano Coelho1-2/+5
Some interface types don't require DFS (such as STATION, P2P_CLIENT etc). In order to centralize these decisions, make cfg80211_chandef_dfs_required() take the iftype into consideration. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: refactor cfg80211_can_use_iftype_chan()Luciano Coelho1-0/+22
Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: Enable GO operation on additional channelsIlan Peer1-1/+3
Allow GO operation on a channel marked with IEEE80211_CHAN_GO_CONCURRENT iff there is an active station interface that is associated to an AP operating on the same channel in the 2 GHz band or the same UNII band (in the 5 GHz band). This relaxation is not allowed if the channel is marked with IEEE80211_CHAN_RADAR. Note that this is a permissive approach to the FCC definitions, that require a clear assessment that the device operating the AP is an authorized master, i.e., with radar detection and DFS capabilities. It is assumed that such restrictions are enforced by user space. Furthermore, it is assumed, that if the conditions that allowed for the operation of the GO on such a channel change, i.e., the station interface disconnected from the AP, it is the responsibility of user space to evacuate the GO from the channel. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>