summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)AuthorFilesLines
2013-06-18Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Series of fixes for 3.10. There are some usual driver fixes (mostly on s5p/exynos playform drivers), plus some fixes at V4L2 core" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (40 commits) [media] soc_camera: error dev remove and v4l2 call [media] sh_veu: fix the buffer size calculation [media] sh_veu: keep power supply until the m2m context is released [media] sh_veu: invoke v4l2_m2m_job_finish() even if a job has been aborted [media] v4l2-ioctl: don't print the clips list [media] v4l2-ctrls: V4L2_CTRL_CLASS_FM_RX controls are also valid radio controls [media] cx88: fix NULL pointer dereference [media] DocBook/media/v4l: update version number [media] exynos4-is: Remove "sysreg" clock handling [media] exynos4-is: Fix reported colorspace at FIMC-IS-ISP subdev [media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured [media] exynos4-is: Prevent NULL pointer dereference when firmware isn't loaded [media] s5p-mfc: Add NULL check for allocated buffer [media] s5p-mfc: added missing end-of-lines in debug messages [media] s5p-mfc: v4l2 controls setup routine moved to initialization code [media] s5p-mfc: separate encoder parameters for h264 and mpeg4 [media] s5p-mfc: Remove special clock usage in driver [media] s5p-mfc: Remove unused s5p_mfc_get_decoded_status_v6() function [media] v4l2: mem2mem: save irq flags correctly [media] coda: v4l2-compliance fix: add VIDIOC_CREATE_BUFS support ...
2013-06-03[media] v4l2-mem2mem: add v4l2_m2m_create_bufs helperPhilipp Zabel1-0/+2
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-01Merge branch 'topic/omap3isp' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull omap3isp clk support from Mauro Carvalho Chehab: "This patch were sent in separate as it depends on a merge from clock framework, that you merged in commit 362ed48dee50" * 'topic/omap3isp' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] omap3isp: Use the common clock framework
2013-04-25Merge branch 'topic/si476x' into patchworkMauro Carvalho Chehab1-0/+37
* topic/si476x: Revert "[media] mfd: Add chip properties handling code for SI476X MFD" Revert "[media] mfd: Add the main bulk of core driver for SI476x code" Revert "[media] mfd: Add commands abstraction layer for SI476X MFD" [media] v4l2: Add a V4L2 driver for SI476X MFD
2013-04-25[media] videobuf-dma-contig: remove support for cached memMauro Carvalho Chehab1-10/+0
videobuf_queue_dma_contig_init_cached() is not used anywhere. Drop support for it, cleaning up the code a little bit. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-19[media] v4l2: Add a V4L2 driver for SI476X MFDAndrey Smirnov1-0/+37
This commit adds a driver that exposes all the radio related functionality of the Si476x series of chips via the V4L2 subsystem. [mchehab@redhat.com: change it to depends on MFD_SI476X_CORE instead of selecting it; vidioc_s_register now uses const struct] Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-17Revert "[media] v4l2: Add a V4L2 driver for SI476X MFD"Mauro Carvalho Chehab1-426/+0
As requested by Andrey Smirnov <andrew.smirnov@gmail.com>, revert this patch. This reverts commit 30bac9110455402fa8888740c6819dd3daa2666f. Conflicts: drivers/media/radio/Kconfig drivers/media/radio/radio-si476x.c Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-15[media] rc: add rc-reddoAntti Palosaari1-0/+1
It is very similar than rc-msi-digivox-iii but new keytable is needed as there is one existing scancode mapped to different button. Also that one has less buttons. NEC extended protocol with address 0x61d6. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-15[media] omap3isp: Use the common clock frameworkLaurent Pinchart1-4/+6
Expose the two ISP external clocks XCLKA and XCLKB as common clocks for subdev drivers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-15[media] v4l2: rename VIDIOC_DBG_G_CHIP_NAME to _CHIP_INFOHans Verkuil1-2/+2
This ioctl will be extended to return more information than just the name. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-15[media] v4l2: put VIDIOC_DBG_G_CHIP_NAME under ADV_DEBUGHans Verkuil1-3/+3
Only enable this ioctl if the VIDEO_ADV_DEBUG config option is set. This prevents abuse from both userspace and kernelspace (some bridge drivers abuse DBG_G_CHIP_IDENT, lets prevent that from happening again with this ioctl). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] mt9p031: Use the common clock frameworkLaurent Pinchart1-2/+0
Configure the device external clock using the common clock framework instead of a board code callback function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] exynos4-is: Move the subdev group ID definitions to public headerSylwester Nawrocki1-0/+11
Move the sub-device group ID definitions to the driver's public header so they are available to other media drivers that need to share modules found in exynos4-is. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] tuner-core: Change config from unsigned int to void *Ondrej Zary1-1/+1
config looks like a hack that was added to tuner-core to allow some configuration of TDA8290 tuner (it's not used by any other driver). But with the new configuration options of tda8290 driver (no_i2c_gate and std_map), it's no longer sufficient. Change config to be void * instead, which allows passing tuner-dependent config struct to drivers. Also update saa7134 driver to reflect this change (no other driver uses this). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-05[media] exynos4-is: Allow colorspace conversion at FIMC-LITESylwester Nawrocki1-0/+2
The FIMC-LITE output DMA allows to configure different YUV order than the order at the camera input interface. Thus there is some limited colorspace conversion possible. This patch makes the color format variable be per FIMC-LITE input/output, rather than a global per device. This also fixes incorrect behavior where color format at the FIMC-LITE.N subdev's source pad is modified by VIDIOC_S_FMT ioctl on the related video node. YUV order definitions are corrected so that we use notation: | byte3 | byte2 | byte1 | byte0 -------+-------+-------+-------+------ YCBYCR | CR | Y | CB | Y YCRYCB | CB | Y | CR | Y CBYCRY | Y | CR | Y | CB CRYCBY | Y | CB | Y | CR Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-05[media] V4L: Remove incorrect EXPORT_SYMBOL() usage at v4l2-of.cSylwester Nawrocki1-3/+3
v4l2_of_parse_parallel_bus() function is now static and EXPORT_SYMBOL() doesn't apply to it any more. Drop this meaningless statement, which was supposed to be done in the original merged patch. While at it, edit the copyright notice so it is sorted in both the v4l2-of.c and v4l2-of.h file in newest entries on top order, and state clearly I'm just the author of parts of the code, not the copyright owner. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-05[media] soc_camera: Add RGB666 & RGB888 formatsPhil Edworthy2-1/+9
Based on work done by Katsuya Matsubara. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-31[media] s5p-fimc: Remove dependency on fimc-core.h in fimc-lite driverSylwester Nawrocki1-0/+34
Drop fimc-lite.h header inclusion to make the exynos-fimc-lite module independent on other modules. Move struct fimc_fmt declaration to the driver's private headers as it is used in multiple modules. Reported-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-31[media] s5p-fimc: Add device tree based sensors registrationSylwester Nawrocki1-0/+3
The sensor (I2C and/or SPI client) devices are instantiated by their corresponding control bus drivers. Since the I2C client's master clock is often provided by a video bus receiver (host interface) or other than I2C/SPI controller device, the drivers of those client devices are not accessing hardware in their driver's probe() callback. Instead, after enabling clock, the host driver calls back into a sub-device when it wants to activate them. This pattern is used by some in-tree drivers and this patch also uses it for DT case. This patch is intended as a first step for adding device tree support to the S5P/Exynos SoC camera drivers. The second one is adding support for asynchronous sub-devices registration and clock control from sub-device driver level. The bindings shall not change when asynchronous probing support is added. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-31[media] s5p-fimc: Add device tree support for the media device driverSylwester Nawrocki1-0/+1
This patch adds changes required for the main camera media device driver corresponding to the top level 'camera' device node. The drivers of devices corresponding to child nodes of the 'camera' node are looked up and and registered as sub-devices to the top level driver. The main driver's probing is deferred if any of the sub-device drivers is not yet initialized and ready. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-31[media] s5p-csis: Add device tree supportSylwester Nawrocki1-0/+13
This patch support for binding the driver to the MIPI-CSIS devices instantiated from device tree and parsing the SoC and board specific properties. The MIPI CSI-2 channel is determined by the value of reg property placed in csis' port subnode. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-31[media] Add a V4L2 OF parserGuennadi Liakhovetski1-0/+111
Add a V4L2 OF parser, implementing bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. [s.nawrocki@samsung.com: various corrections and improvements since the initial version] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-29[media] v4l2: Add a V4L2 driver for SI476X MFDAndrey Smirnov1-0/+426
This commit adds a driver that exposes all the radio related functionality of the Si476x series of chips via the V4L2 subsystem. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-29[media] ioctl numbers are unsigned intMauro Carvalho Chehab1-1/+1
ioctl's number is unsigned int. Fix it at vidioc_default. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-25[media] v4l2: add new VIDIOC_DBG_G_CHIP_NAME ioctlHans Verkuil1-0/+3
Simplify the debugging ioctls by creating the VIDIOC_DBG_G_CHIP_NAME ioctl. This will eventually replace VIDIOC_DBG_G_CHIP_IDENT. Chip matching is done by the name or index of subdevices or an index to a bridge chip. Most of this can all be done automatically, so most drivers just need to provide get/set register ops. In particular, it is now possible to get/set subdev registers without requiring assistance of the bridge driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2 core: remove the obsolete dv_preset supportHans Verkuil1-9/+0
These ioctls are no longer used by any drivers, so remove them. [mchehab@redhat.com: Fix merge conflict] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2-subdev: remove obsolete dv_preset opsHans Verkuil1-16/+0
These ops are no longer used, so it's time to remove them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2-common: remove obsolete v4l_fill_dv_preset_infoHans Verkuil1-1/+0
It's no longer used, so it can now be removed. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] uda1342: add new uda1342 audio codec driverHans Verkuil1-0/+29
This based on the wis-uda1342.c driver that's part of the go7007 driver. It has been converted to a v4l subdev driver by Pete Eberlein, and I made additional cleanups. Based on work by: Pete Eberlein <pete@sensoray.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] tuner: add Sony BTF tunersHans Verkuil1-0/+4
This adds support for three Sony BTF tuners: TUNER_SONY_BTF_PG472Z: PAL+SECAM TUNER_SONY_BTF_PK467Z: NTSC-M-JP TUNER_SONY_BTF_PB463Z: NTSC-M These come from the go7007 staging driver where they were implemented in the wis-sony-tuner i2c driver. Adding support for these tuners to tuner-types.c is the first step towards removing the wis-sony-tuner driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] saa7115: add support for double-rate ASCLKHans Verkuil1-3/+4
Some devices expect a double rate ASCLK. Add a flag to let the driver know through the s_crystal_freq call. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] saa7115: add config flag to change the IDQ polarityHans Verkuil1-10/+21
Needed by the go7007 driver: it assumes a different polarity of the IDQ signal, so we need to be able to tell the saa7115 about this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2-core: add code to check for specific opsHans Verkuil2-0/+16
This patch adds a v4l2_subdev_has_op() macro and a v4l2_device_has_op macro to quickly check if a specific subdev or any subdev supports a particular subdev operation. This makes it easy for drivers to disable certain ioctls if none of the subdevs supports the necessary functionality. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2-ctrls: eliminate lockdep false alarms for struct ↵Andy Walls1-3/+26
v4l2_ctrl_handler.lock When calling v4l2_ctrl_add_handler(), lockdep would detect a potential recursive locking problem on a situation that is by design intended and not a recursive lock. This happened because all struct v4l2_ctrl_handler.lock mutexes were created as members of the same lock class in v4l2_ctrl_handler_init(), and v4l2_ctrl_add_handler() takes the hdl->lock on two different v4l2_ctrl_handler instances. This change breaks the large lockdep lock class for struct v4l2_ctrl_handler.lock and breaks it into v4l2_ctrl_handler instantiation specific lock classes with meaningful class names. This will validly eliminate lockdep alarms for v4l2_ctrl_handler locking validation, as long as the relationships between drivers adding v4l2 controls to their own handler from other v4l2 drivers' control handlers remains straightforward. struct v4l2_ctrl_handler.lock lock classes are created with names such that the output of cat /proc/lockdep indicates where in the v4l2 driver code v4l2_ctrl_handle_init() is being called on instantiations: ffffffffa045f490 FD: 10 BD: 8 +.+...: cx2341x:1534:(hdl)->lock ffffffffa0497d20 FD: 12 BD: 2 +.+.+.: saa7115:1581:(hdl)->lock ffffffffa04ac660 FD: 14 BD: 2 +.+.+.: msp3400_driver:756:(hdl)->lock ffffffffa0484b90 FD: 12 BD: 1 +.+.+.: ivtv_gpio:366:(&itv->hdl_gpio)->lock ffffffffa04eb530 FD: 11 BD: 2 +.+.+.: cx25840_core:1982:(&state->hdl)->lock ffffffffa04fbc80 FD: 11 BD: 3 +.+.+.: wm8775:246:(&state->hdl)->lock Some lock chains, that were previously causing the recursion alarms, are now visible in the output of cat /proc/lockdep_chains: irq_context: 0 [ffffffffa0497d20] saa7115:1581:(hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa04ac660] msp3400_driver:756:(hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa0484b90] ivtv_gpio:366:(&itv->hdl_gpio)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa04eb530] cx25840_core:1982:(&state->hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa04fbc80] wm8775:246:(&state->hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock Signed-off-by: Andy Walls <awalls@md.metrocast.net> [hans.verkuil@cisco.com: keep mutex_init in v4l2_ctrl_handler_init_class] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_register ioctlHans Verkuil2-2/+2
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: pass std by value to the write-only s_std ioctlHans Verkuil2-2/+2
This ioctl is defined as IOW, so pass the argument by value instead of by reference. I could have chosen to add const instead, but this is 1) easier to handle in drivers and 2) consistent with the s_std subdev operation. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_tuner ioctlHans Verkuil2-2/+2
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_frequency ioctlHans Verkuil2-2/+2
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-23[media] rc-core: don't treat dev->rc_map.rc_type as a bitmapDavid Härdeman1-0/+2
store_protocols() treats dev->rc_map.rc_type as a bitmap which is wrong for two reasons. First of all, it is pretty bogus to change the protocol type of the keymap just because the hardware has been asked to decode a different protocol. Second, dev->rc_map.rc_type is an enum (i.e. a single protocol) as pointed out by James Hogan <james.hogan@imgtec.com>. Fix both issues by introducing a separate enabled_protocols member to struct rc_dev. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] media: ths7353: add support for ths7353 video amplifierLad, Prabhakar2-0/+45
The patch adds support for THS7353 video amplifier. The the THS7353 amplifier is very much similar to the existing THS7303 video amplifier driver. This patch appropriately makes changes to the existing ths7303 driver and adds support for the THS7353. This patch also adds V4L2_IDENT_THS7353 for the THS7353 chip and appropriate changes to Kconfig file for building. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] videobuf2: add gfp_flagsHans Verkuil1-2/+8
Some drivers have special memory requirements for their buffers, usually related to DMA (e.g. GFP_DMA or __GFP_DMA32). Make it possible to specify additional GFP flags for those buffers by adding a gfp_flags field to vb2_queue. Note that this field will be replaced in the future with a different mechanism, but that is still work in progress and we need this feature now so we won't be able to convert drivers with such requirements to vb2. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-19[media] davinci: more gama -> gamma typo fixesHans Verkuil1-3/+3
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-19[media] davinci/dm644x_ccdc: fix compiler warningHans Verkuil1-6/+18
drivers/media/platform/davinci/dm644x_ccdc.c: In function ‘validate_ccdc_param’: drivers/media/platform/davinci/dm644x_ccdc.c:233:32: warning: comparison between ‘enum ccdc_gama_width’ and ‘enum ccdc_data_size’ [-Wenum-compare] It took a bit of work, see this thread of an earlier attempt to fix this: https://patchwork.kernel.org/patch/1923091/ I've chosen not to follow the suggestions in that thread since gamma_width is really a different property from data_size. What you really want is to know if gamma_width fits inside data_size and for that you need to translate each enum into a maximum bit number so you can safely compare the two. So I put in two static inline translation functions instead, keeping the rest of the code the same (except for fixing the 'gama' typo). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-19[media] davinci: remove VPBE_ENC_DV_PRESET and rename VPBE_ENC_CUSTOM_TIMINGSHans Verkuil1-2/+1
Remove VPBE_ENC_DV_PRESET (the DV_PRESET API is no longer supported) and VPBE_ENC_CUSTOM_TIMINGS is renamed to VPBE_ENC_DV_TIMINGS since the old "CUSTOM_TIMINGS" name is deprecated in favor of "DV_TIMINGS". Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-19[media] media: Add 64--32 bit compat ioctl handlerSakari Ailus1-0/+1
Provide an ioctl handler for 32-bit binaries on 64-bit systems. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] vb2: Add support for non monotonic timestampsKamil Debski1-0/+1
Not all drivers use monotonic timestamps. This patch adds a way to set the timestamp type per every queue. In addition, set proper timestamp type in drivers that I am sure that use either MONOTONIC or COPY timestamps. Other drivers will correctly report UNKNOWN timestamp type instead of assuming that all drivers use monotonic timestamps. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] bttv: add VIDIOC_DBG_G_CHIP_IDENTHans Verkuil1-0/+8
VIDIOC_DBG_G_CHIP_IDENT is a prerequisite for the G/S_REGISTER ioctls. In addition, add support to call G/S_REGISTER for supporting i2c devices. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-08[media] media: ov7670: Add possibility to disable pixclk during hblankJavier Martin1-0/+1
Some bridge drivers capture pixels during blanking periods if pixclk is enabled. In order to avoid capturing bogus data we need to disable pixclk in the sensor during those blanking periods. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-08[media] media: ov7670: add possibility to bypass pll for ov7675Javier Martin1-0/+1
For a frame rate of 30 fps a pixclk of 24MHz is needed. For those cases where the ov7670 has a clean 24MHz input (xvclk) the PLL can be bypassed. This will result in a value of clkrc of 1, which means that in practice pixclk = xvclk (input clock) Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] blackfin: add error frame supportScott Jiang1-1/+2
Mark current frame as error frame when ppi error interrupt report fifo error. Member next_frm in struct bcap_device can be optimized out. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>