| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"Three main updates: folio conversion by Matthew, switch to a new mount
API by Hongbo and Eric, and several sysfs entries to tune GCs for ZUFS
with finer granularity by Daeho.
There are also patches to address bugs and issues in the existing
features such as GCs, file pinning, write-while-dio-read, contingous
block allocation, and memory access violations.
Enhancements:
- switch to new mount API and folio conversion
- add sysfs nodes to controle F2FS GCs for ZUFS
- improve performance on the nat entry cache
- drop inode from the donation list when the last file is closed
- avoid splitting bio when reading multiple pages
Bug fixes:
- fix to trigger foreground gc during f2fs_map_blocks() in lfs mode
- make sure zoned device GC to use FG_GC in shortage of free section
- fix to calculate dirty data during has_not_enough_free_secs()
- fix to update upper_p in __get_secs_required() correctly
- wait for inflight dio completion, excluding pinned files read using dio
- don't break allocation when crossing contiguous sections
- vm_unmap_ram() may be called from an invalid context
- fix to avoid out-of-boundary access in dnode page
- fix to avoid panic in f2fs_evict_inode
- fix to avoid UAF in f2fs_sync_inode_meta()
- fix to use f2fs_is_valid_blkaddr_raw() in do_write_page()
- fix UAF of f2fs_inode_info in f2fs_free_dic
- fix to avoid invalid wait context issue
- fix bio memleak when committing super block
- handle nat.blkaddr corruption in f2fs_get_node_info()
In addition, there are also clean-ups and minor bug fixes"
* tag 'f2fs-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (109 commits)
f2fs: drop inode from the donation list when the last file is closed
f2fs: add gc_boost_gc_greedy sysfs node
f2fs: add gc_boost_gc_multiple sysfs node
f2fs: fix to trigger foreground gc during f2fs_map_blocks() in lfs mode
f2fs: fix to calculate dirty data during has_not_enough_free_secs()
f2fs: fix to update upper_p in __get_secs_required() correctly
f2fs: directly add newly allocated pre-dirty nat entry to dirty set list
f2fs: avoid redundant clean nat entry move in lru list
f2fs: zone: wait for inflight dio completion, excluding pinned files read using dio
f2fs: ignore valid ratio when free section count is low
f2fs: don't break allocation when crossing contiguous sections
f2fs: remove unnecessary tracepoint enabled check
f2fs: merge the two conditions to avoid code duplication
f2fs: vm_unmap_ram() may be called from an invalid context
f2fs: fix to avoid out-of-boundary access in dnode page
f2fs: switch to the new mount api
f2fs: introduce fs_context_operation structure
f2fs: separate the options parsing and options checking
f2fs: Add f2fs_fs_context to record the mount options
f2fs: Allow sbi to be NULL in f2fs_printk
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add new "hash_pointers=[auto|always|never]" boot parameter to force
the hashing even with "slab_debug" enabled
- Allow to stop CPU, after losing nbcon console ownership during
panic(), even without proper NMI
- Allow to use the printk kthread immediately even for the 1st
registered nbcon
- Compiler warning removal
* tag 'printk-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: nbcon: Allow reacquire during panic
printk: Allow to use the printk kthread immediately even for 1st nbcon
slab: Decouple slab_debug and no_hash_pointers
vsprintf: Use __diag macros to disable '-Wsuggest-attribute=format'
compiler-gcc.h: Introduce __diag_GCC_all
|
|
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Support for a new RTC in an existing driver and all the drivers
exposing clocks using the common clock framework have been converted
to determine_rate(). Summary:
Subsystem:
- Convert drivers exposing a clock from round_rate() to determine_rate()
Drivers:
- ds1307: oscillator stop flag handling for ds1341
- pcf85063: add support for RV8063"
* tag 'rtc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: ds1685: Update Joshua Kinard's email address.
rtc: rv3032: convert from round_rate() to determine_rate()
rtc: rv3028: convert from round_rate() to determine_rate()
rtc: pcf8563: convert from round_rate() to determine_rate()
rtc: pcf85063: convert from round_rate() to determine_rate()
rtc: nct3018y: convert from round_rate() to determine_rate()
rtc: max31335: convert from round_rate() to determine_rate()
rtc: m41t80: convert from round_rate() to determine_rate()
rtc: hym8563: convert from round_rate() to determine_rate()
rtc: ds1307: convert from round_rate() to determine_rate()
rtc: rv3028: fix incorrect maximum clock rate handling
rtc: pcf8563: fix incorrect maximum clock rate handling
rtc: pcf85063: fix incorrect maximum clock rate handling
rtc: nct3018y: fix incorrect maximum clock rate handling
rtc: hym8563: fix incorrect maximum clock rate handling
rtc: ds1307: fix incorrect maximum clock rate handling
rtc: pcf85063: scope pcf85063_config structures
rtc: Optimize calculations in rtc_time64_to_tm()
dt-bindings: rtc: amlogic,a4-rtc: Add compatible string for C3
rtc: ds1307: handle oscillator stop flag (OSF) for ds1341
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing updates from Steven Rostedt:
- Remove unneeded goto out statements
Over time, the logic was restructured but left a "goto out" where the
out label simply did a "return ret;". Instead of jumping to this out
label, simply return immediately and remove the out label.
- Add guard(ring_buffer_nest)
Some calls to the tracing ring buffer can happen when the ring buffer
is already being written to at the same context (for example, a
trace_printk() in between a ring_buffer_lock_reserve() and a
ring_buffer_unlock_commit()).
In order to not trigger the recursion detection, these functions use
ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard()
for these functions so that their use cases can be simplified and not
need to use goto for the release.
- Clean up the tracing code with guard() and __free() logic
There were several locations that were prime candidates for using
guard() and __free() helpers. Switch them over to use them.
- Fix output of function argument traces for unsigned int values
The function tracer with "func-args" option set will record up to 6
argument registers and then use BTF to format them for human
consumption when the trace file is read. There are several arguments
that are "unsigned long" and even "unsigned int" that are either and
address or a mask. It is easier to understand if they were printed
using hexadecimal instead of decimal. The old method just printed all
non-pointer values as signed integers, which made it even worse for
unsigned integers.
For instance, instead of:
__local_bh_disable_ip(ip=-2127311112, cnt=256) <-handle_softirqs
show:
__local_bh_disable_ip(ip=0xffffffff8133cef8, cnt=0x100) <-handle_softirqs"
* tag 'trace-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have unsigned int function args displayed as hexadecimal
ring-buffer: Convert ring_buffer_write() to use guard(preempt_notrace)
tracing: Use __free(kfree) in trace.c to remove gotos
tracing: Add guard() around locks and mutexes in trace.c
tracing: Add guard(ring_buffer_nest)
tracing: Remove unneeded goto out logic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Daniel Gomez:
"This is a small set of changes for modules, primarily to extend module
users to use the module data structures in combination with the
already no-op stub module functions, even when support for modules is
disabled in the kernel configuration. This change follows the kernel's
coding style for conditional compilation and allows kunit code to drop
all CONFIG_MODULES ifdefs, which is also part of the changes. This
should allow others part of the kernel to do the same cleanup.
The remaining changes include a fix for module name length handling
which could potentially lead to the removal of an incorrect module,
and various cleanups"
* tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: Rename MAX_PARAM_PREFIX_LEN to __MODULE_NAME_LEN
tracing: Replace MAX_PARAM_PREFIX_LEN with MODULE_NAME_LEN
module: Restore the moduleparam prefix length check
module: Remove unnecessary +1 from last_unloaded_module::name size
module: Prevent silent truncation of module name in delete_module(2)
kunit: test: Drop CONFIG_MODULE ifdeffery
module: make structure definitions always visible
module: move 'struct module_use' to internal.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"New driver:
- Renesas I3C controller
Subsystem:
- use adapter timeout value for I2C transfers
- don't fail if GETHDRCAP is unsupported
- replace ENOTSUPP with SUSV4-compliant EOPNOTSUPP
Drivers:
- svc: Fix npcm845 FIFO_EMPTY quirk"
* tag 'i3c/for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (25 commits)
i3c: add missing include to internal header
i3c: dw: Remove redundant pm_runtime_mark_last_busy() calls
i3c: master: svc: Remove redundant pm_runtime_mark_last_busy() calls
i3c: master: svc: Fix npcm845 FIFO_EMPTY quirk
i3c: master: Add basic driver for the Renesas I3C controller
dt-bindings: i3c: Add Renesas I3C controller
i3c: Add more parameters for controllers to the header
i3c: Standardize defines for specification parameters
i3c: fix module_i3c_i2c_driver() with I3C=n
i3c: master: cdns: Simplify handling clocks in probe()
i3c: Fix i3c_device_do_priv_xfers() kernel-doc indentation
i3c: master: dw: Use i3c_writel_fifo() and i3c_readl_fifo()
i3c: master: cdns: Use i3c_writel_fifo() and i3c_readl_fifo()
i3c: master: Add inline i3c_readl_fifo() and i3c_writel_fifo()
i3c: prefix hexadecimal entries in sysfs
i3c: master: cdns: replace ENOTSUPP with SUSV4-compliant EOPNOTSUPP
i3c: dw: replace ENOTSUPP with SUSV4-compliant EOPNOTSUPP
i3c: master: replace ENOTSUPP with SUSV4-compliant EOPNOTSUPP
i3c: don't fail if GETHDRCAP is unsupported
i3c: add patchwork entry to MAINTAINERS
...
|
|
The lifetime of address handler has been managed by linked list and RCU.
This approach was introduced in commit 35202f7d8420 ("firewire: remove
global lock around address handlers, convert to RCU"). The invocations of
address handler are performed within RCU read-side critical sections.
In commit 57e6d9f85fff ("firewire: ohci: use workqueue to handle events
of AR request/response contexts"), the invocations are in a workqueue
context. The approach still imposes limitation that sleeping is not
allowed within RCU read-side critical sections. However, since sleeping
is not permitted within RCU read-side critical sections, this approach
still has a limitation.
This commit adds reference counting to decouple handler invocation from
handler discovery. The linked list and RCU is used to discover the
handlers, while the reference counting is used to invoke them safely.
Link: https://lore.kernel.org/r/20250803122015.236493-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
I am switching my address to a personal domain, so need to update the
driver's files and the entry in MAINTAINERS.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Link: https://lore.kernel.org/r/20250721170051.32407-1-kumba@gentoo.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Nothing stands out, apart from maybe the interesting Eswin EIC7700, a
RISC-V SoC I've never seen before.
Core changes:
- Open code PINCTRL_FUNCTION_DESC() instead of defining a complex
macro only used in one place
- Add pinmux_generic_add_pinfunction() helper and use this in a few
drivers
New drivers:
- Amlogic S7, S7D and S6 pin control support
- Eswin EIC7700 pin control support
- Qualcomm PMIV0104, PM7550 and Milos pin control support
Because of unhelpful numbering schemes, the Qualcomm driver now
needs to start to rely on SoC codenames
- STM32 HDP pin control support
- Mediatek MT8189 pin control support
Improvements:
- Switch remaining pin control drivers over to the new GPIO set
callback that provides a return value
- Support RSVD (reserved) pins in the STM32 driver
- Move many fixed assignments over to pinctrl_desc definitions
- Handle multiple TLMM regions in the Qualcomm driver"
* tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: mediatek: Add pinctrl driver for mt8189
dt-bindings: pinctrl: mediatek: Add support for mt8189
pinctrl: aspeed-g6: Add PCIe RC PERST pin group
pinctrl: ingenic: use pinmux_generic_add_pinfunction()
pinctrl: keembay: use pinmux_generic_add_pinfunction()
pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction()
pinctrl: airoha: use pinmux_generic_add_pinfunction()
pinctrl: equilibrium: use pinmux_generic_add_pinfunction()
pinctrl: provide pinmux_generic_add_pinfunction()
pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC()
pinctrl: ma35: use new GPIO line value setter callbacks
MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer
pinctrl: stm32: Introduce HDP driver
dt-bindings: pinctrl: stm32: Introduce HDP
pinctrl: qcom: Add Milos pinctrl driver
dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer
pinctrl: qcom: spmi: Add PM7550
dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support
pinctrl: qcom: spmi: Add PMIV0104
dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support
...
|
|
After update of execmem_cache_free() that made memory writable before
updating it, there is no need to update read only memory, so the writable
parameter to execmem_fill_trapping_insns() is not needed. Drop it.
Link: https://lkml.kernel.org/r/20250713071730.4117334-7-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some callers of execmem_alloc() require the memory to be temporarily
writable even when it is allocated from ROX cache. These callers use
execemem_make_temp_rw() right after the call to execmem_alloc().
Wrap this sequence in execmem_alloc_rw() API.
Link: https://lkml.kernel.org/r/20250713071730.4117334-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "x86: enable EXECMEM_ROX_CACHE for ftrace and kprobes", v3.
These patches enable use of EXECMEM_ROX_CACHE for ftrace and kprobes
allocations on x86.
They also include some ground work in execmem.
Since the execmem model for caching large ROX pages changed from the
initial assumption that the memory that is allocated from ROX cache is
always ROX to the current state where memory can be temporarily made RW
and then restored to ROX, we can stop using text poking to update it.
This also saves the hassle of trying lock text_mutex in
execmem_cache_free() when kprobes already hold that mutex.
This patch (of 8):
The execmem_update_copy() that used text poking was required when memory
allocated from ROX cache was always read-only. Since now its permissions
can be switched to read-write there is no need in a function that updates
memory with text poking.
Remove it.
Link: https://lkml.kernel.org/r/20250713071730.4117334-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20250713071730.4117334-2-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
By inducing delays in the right places, Jann Horn created a reproducer for
a hard to hit UAF issue that became possible after VMAs were allowed to be
recycled by adding SLAB_TYPESAFE_BY_RCU to their cache.
Race description is borrowed from Jann's discovery report:
lock_vma_under_rcu() looks up a VMA locklessly with mas_walk() under
rcu_read_lock(). At that point, the VMA may be concurrently freed, and it
can be recycled by another process. vma_start_read() then increments the
vma->vm_refcnt (if it is in an acceptable range), and if this succeeds,
vma_start_read() can return a recycled VMA.
In this scenario where the VMA has been recycled, lock_vma_under_rcu()
will then detect the mismatching ->vm_mm pointer and drop the VMA through
vma_end_read(), which calls vma_refcount_put(). vma_refcount_put() drops
the refcount and then calls rcuwait_wake_up() using a copy of vma->vm_mm.
This is wrong: It implicitly assumes that the caller is keeping the VMA's
mm alive, but in this scenario the caller has no relation to the VMA's mm,
so the rcuwait_wake_up() can cause UAF.
The diagram depicting the race:
T1 T2 T3
== == ==
lock_vma_under_rcu
mas_walk
<VMA gets removed from mm>
mmap
<the same VMA is reallocated>
vma_start_read
__refcount_inc_not_zero_limited_acquire
munmap
__vma_enter_locked
refcount_add_not_zero
vma_end_read
vma_refcount_put
__refcount_dec_and_test
rcuwait_wait_event
<finish operation>
rcuwait_wake_up [UAF]
Note that rcuwait_wait_event() in T3 does not block because refcount was
already dropped by T1. At this point T3 can exit and free the mm causing
UAF in T1.
To avoid this we move vma->vm_mm verification into vma_start_read() and
grab vma->vm_mm to stabilize it before vma_refcount_put() operation.
[surenb@google.com: v3]
Link: https://lkml.kernel.org/r/20250729145709.2731370-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250728175355.2282375-1-surenb@google.com
Fixes: 3104138517fc ("mm: make vma cache SLAB_TYPESAFE_BY_RCU")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/all/CAG48ez0-deFbVH=E3jbkWx=X3uVbd8nWeo6kbJPQ0KoUD+m2tA@mail.gmail.com/
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If an anon folio is mapped into userspace, its anon_vma must be alive,
otherwise rmap walks can hit UAF.
There have been syzkaller reports a few months ago[1][2] of UAF in rmap
walks that seems to indicate that there can be pages with elevated
mapcount whose anon_vma has already been freed, but I think we never
figured out what the cause is; and syzkaller only hit these UAFs when
memory pressure randomly caused reclaim to rmap-walk the affected pages,
so it of course didn't manage to create a reproducer.
Add a VM_WARN_ON_FOLIO() when we add/remove mappings of anonymous folios
to hopefully catch such issues more reliably.
[1] https://lore.kernel.org/r/67abaeaf.050a0220.110943.0041.GAE@google.com
[2] https://lore.kernel.org/r/67a76f33.050a0220.3d72c.0028.GAE@google.com
Link: https://lkml.kernel.org/r/20250725-anonvma-uaf-debug-v2-1-bc3c7e5ba5b1@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is dead code, which was used from commit b739f125e4eb ("i915: use
io_mapping_map_user") but reverted a month later by commit 0e4fe0c9f2f9
("Revert "i915: use io_mapping_map_user"") back in 2021.
Since then nobody has used it, so remove it.
[akpm@linux-foundation.org: update Documentation/core-api/mm-api.rst, per Vlastimil]
Link: https://lkml.kernel.org/r/20250725142901.81502-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Optimizations for khugepaged", v4.
If the underlying folio mapped by the ptes is large, we can process those
ptes in a batch using folio_pte_batch().
For arm64 specifically, this results in a 16x reduction in the number of
ptep_get() calls, since on a contig block, ptep_get() on arm64 will
iterate through all 16 entries to collect a/d bits. Next, ptep_clear()
will cause a TLBI for every contig block in the range via
contpte_try_unfold(). Instead, use clear_ptes() to only do the TLBI at
the first and last contig block of the range.
For split folios, there will be no pte batching; the batch size returned
by folio_pte_batch() will be 1. For pagetable split folios, the ptes will
still point to the same large folio; for arm64, this results in the
optimization described above, and for other arches, a minor improvement is
expected due to a reduction in the number of function calls and batching
atomic operations.
This patch (of 3):
Let's add variants to be used where "full" does not apply -- which will
be the majority of cases in the future. "full" really only applies if
we are about to tear down a full MM.
Use get_and_clear_ptes() in existing code, clear_ptes() users will
be added next.
Link: https://lkml.kernel.org/r/20250724052301.23844-2-dev.jain@arm.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mseal cleanups", v4.
Perform a number of cleanups to the mseal logic. Firstly, VM_SEALED is
treated differently from every other VMA flag, it really doesn't make
sense to do this, so we start by making this consistent with everything
else.
Next we place the madvise logic where it belongs - in mm/madvise.c. It
really makes no sense to abstract this elsewhere. In doing so, we go to
great lengths to explain very clearly the previously very confusing logic
as to what sealed mappings are impacted here.
In doing so, we retain existing logic regarding treatment of madvise()
discard operations for a sealed, read-only MAP_PRIVATE file-backed
mapping. This is something we likely need to revisit.
We then abstract out and explain the 'are there are any gaps in this range
in the mm?' check being performed as a prerequisite to mseal being
performed.
Finally, we simplify the actual mseal logic which is really quite
straightforward.
No functional change is intended.
This patch (of 4):
There is no reason to treat VM_SEALED in a special way, in each other case
in which a VMA flag is unavailable due to configuration, we simply assign
that flag to VM_NONE, so make VM_SEALED consistent with all other VMA
flags in this respect.
Additionally, use the next available bit for VM_SEALED, 42, rather than
arbitrarily putting it at 63 and update the declaration to match all other
VMA flags.
No functional change intended.
Link: https://lkml.kernel.org/r/cover.1753431105.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/aeb398a77029b6e7377cd944328bc9bbc3c90537.1753431105.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit cd57b77197a4 ("ext4: Convert ext4_bio_write_page() to use a folio)
removed set_page_writeback_keepwrite() which was the last/only caller of
folio_start_writeback_keepwrite().
Link: https://lkml.kernel.org/r/20250722182230.2114587-1-joannelkoong@gmail.com
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When booting a new kernel with kexec_file, the kernel picks a target
location that the kernel should live at, then allocates random pages,
checks whether any of those patches magically happens to coincide with a
target address range and if so, uses them for that range.
For every page allocated this way, it then creates a page list that the
relocation code - code that executes while all CPUs are off and we are
just about to jump into the new kernel - copies to their final memory
location. We can not put them there before, because chances are pretty
good that at least some page in the target range is already in use by the
currently running Linux environment. Copying is happening from a single
CPU at RAM rate, which takes around 4-50 ms per 100 MiB.
All of this is inefficient and error prone.
To successfully kexec, we need to quiesce all devices of the outgoing
kernel so they don't scribble over the new kernel's memory. We have seen
cases where that does not happen properly (*cough* GIC *cough*) and hence
the new kernel was corrupted. This started a month long journey to root
cause failing kexecs to eventually see memory corruption, because the new
kernel was corrupted severely enough that it could not emit output to tell
us about the fact that it was corrupted. By allocating memory for the
next kernel from a memory range that is guaranteed scribbling free, we can
boot the next kernel up to a point where it is at least able to detect
corruption and maybe even stop it before it becomes severe. This
increases the chance for successful kexecs.
Since kexec got introduced, Linux has gained the CMA framework which can
perform physically contiguous memory mappings, while keeping that memory
available for movable memory when it is not needed for contiguous
allocations. The default CMA allocator is for DMA allocations.
This patch adds logic to the kexec file loader to attempt to place the
target payload at a location allocated from CMA. If successful, it uses
that memory range directly instead of creating copy instructions during
the hot phase. To ensure that there is a safety net in case anything goes
wrong with the CMA allocation, it also adds a flag for user space to force
disable CMA allocations.
Using CMA allocations has two advantages:
1) Faster by 4-50 ms per 100 MiB. There is no more need to copy in the
hot phase.
2) More robust. Even if by accident some page is still in use for DMA,
the new kernel image will be safe from that access because it resides
in a memory region that is considered allocated in the old kernel and
has a chance to reinitialize that component.
Link: https://lkml.kernel.org/r/20250610085327.51817-1-graf@amazon.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Zhongkun He <hezhongkun.hzk@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
xxh32_digest() and xxh32_update() were added in 2017 in the original
xxhash commit, but have remained unused.
Remove them.
Link: https://lkml.kernel.org/r/20250716133245.243363-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Gilbert <linux@treblig.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This update replaces the remaining tasklet usage in the FireWire
subsystem with workqueue for asynchronous packet transmission. With
this change, tasklets are now fully eliminated from the subsystem.
Asynchronous packet transmission is used for serial bus topology
management as well as for the operation of the SBP-2 protocol driver
(firewire-sbp2). To ensure reliability during low-memory conditions,
the associated workqueue is created with the WQ_MEM_RECLAIM flag,
allowing it to participate in memory reclaim paths. Other attributes
are aligned with those used for isochronous packet handling, which was
migrated to workqueues in v6.12.
The workqueues are sleepable and support preemptible work items,
making them more suitable for real-time workloads that benefit from
timely task preemption at the system level.
There remains an issue where 'schedule()' may be called within an RCU
read-side critical section, due to a direct replacement of
'tasklet_disable_in_atomic()' with 'disable_work_sync()'. A proposed
fix for this has been posted[1], and is currently under review and
testing. It is expected to be sent upstream later"
Link: https://lore.kernel.org/lkml/20250728015125.17825-1-o-takashi@sakamocchi.jp/ [1]
* tag 'firewire-updates-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: reduce the size of common context structure by extracting members into AT structure
firewire: core: minor code refactoring to localize table of gap count
firewire: ohci: use workqueue to handle events of AT request/response contexts
firewire: ohci: use workqueue to handle events of AR request/response contexts
firewire: core: allocate workqueue for AR/AT request/response contexts
firewire: core: use from_work() macro to expand parent structure of work_struct
firewire: ohci: use from_work() macro to expand parent structure of work_struct
firewire: ohci: correct code comments about bus_reset tasklet
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix kCFI failures in JITed BPF code on arm64 (Sami Tolvanen, Puranjay
Mohan, Mark Rutland, Maxwell Bland)
- Disallow tail calls between BPF programs that use different cgroup
local storage maps to prevent out-of-bounds access (Daniel Borkmann)
- Fix unaligned access in flow_dissector and netfilter BPF programs
(Paul Chaignon)
- Avoid possible use of uninitialized mod_len in libbpf (Achill
Gilgenast)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test for unaligned flow_dissector ctx access
bpf: Improve ctx access verifier error message
bpf: Check netfilter ctx accesses are aligned
bpf: Check flow_dissector ctx accesses are aligned
arm64/cfi,bpf: Support kCFI + BPF on arm64
cfi: Move BPF CFI types and helpers to generic code
cfi: add C CFI type macro
libbpf: Avoid possible use of uninitialized mod_len
bpf: Fix oob access in cgroup local storage
bpf: Move cgroup iterator helpers to bpf.h
bpf: Move bpf map owner out of common struct
bpf: Add cookie object to bpf maps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The most significant changes in this pull request is the series that
introduces ACQUIRE() and ACQUIRE_ERR() macros to replace conditional
locking and ease the pain points of scoped_cond_guard().
The series also includes follow on changes that refactor the CXL
sub-system to utilize the new macros.
Detail summary:
- Add documentation template for CXL conventions to document CXL
platform quirks
- Replace mutex_lock_io() with mutex_lock() for mailbox
- Add location limit for fake CFMWS range for cxl_test, ARM platform
enabling
- CXL documentation typo and clarity fixes
- Use correct format specifier for function cxl_set_ecs_threshold()
- Make cxl_bus_type constant
- Introduce new helper cxl_resource_contains_addr() to check address
availability
- Fix wrong DPA checking for PPR operation
- Remove core/acpi.c and CXL core dependency on ACPI
- Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
- Add CXL updates utilizing ACQUIRE() macro to remove gotos and
improve readability
- Add return for the dummy version of cxl_decoder_detach() without
CONFIG_CXL_REGION
- CXL events updates for spec r3.2
- Fix return of __cxl_decoder_detach() error path
- CXL debugfs documentation fix"
* tag 'cxl-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (28 commits)
Documentation/ABI/testing/debugfs-cxl: Add 'cxl' to clear_poison path
cxl/region: Fix an ERR_PTR() vs NULL bug
cxl/events: Trace Memory Sparing Event Record
cxl/events: Add extra validity checks for CVME count in DRAM Event Record
cxl/events: Add extra validity checks for corrected memory error count in General Media Event Record
cxl/events: Update Common Event Record to CXL spec rev 3.2
cxl: Fix -Werror=return-type in cxl_decoder_detach()
cleanup: Fix documentation build error for ACQUIRE updates
cxl: Convert to ACQUIRE() for conditional rwsem locking
cxl/region: Consolidate cxl_decoder_kill_region() and cxl_region_detach()
cxl/region: Move ready-to-probe state check to a helper
cxl/region: Split commit_store() into __commit() and queue_reset() helpers
cxl/decoder: Drop pointless locking
cxl/decoder: Move decoder register programming to a helper
cxl/mbox: Convert poison list mutex to ACQUIRE()
cleanup: Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
cxl: Remove core/acpi.c and cxl core dependency on ACPI
cxl/core: Using cxl_resource_contains_addr() to check address availability
cxl/edac: Fix wrong dpa checking for PPR operation
cxl/core: Introduce a new helper cxl_resource_contains_addr()
...
|
|
syzbot was able to craft a packet with very long IPv6 extension headers
leading to an overflow of skb->transport_header.
This 16bit field has a limited range.
Add skb_reset_transport_header_careful() helper and use it
from ipv6_gso_segment()
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Modules linked in:
CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Call Trace:
<TASK>
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
__skb_gso_segment+0x342/0x510 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950
validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000
sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329
__dev_xmit_skb net/core/dev.c:4102 [inline]
__dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679
Fixes: d1da932ed4ec ("ipv6: Separate ipv6 offload support")
Reported-by: syzbot+af43e647fd835acc02df@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/688a1a05.050a0220.5d226.0008.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250730131738.3385939-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull virtio updates from Michael Tsirkin:
- vhost can now support legacy threading if enabled in Kconfig
- vsock memory allocation strategies for large buffers have been
improved, reducing pressure on kmalloc
- vhost now supports the in-order feature. guest bits missed the merge
window.
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (30 commits)
vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers
vsock/virtio: Rename virtio_vsock_skb_rx_put()
vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers
vsock/virtio: Move SKB allocation lower-bound check to callers
vsock/virtio: Rename virtio_vsock_alloc_skb()
vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page
vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put()
vsock/virtio: Validate length in packet header before skb_put()
vhost/vsock: Avoid allocating arbitrarily-sized SKBs
vhost_net: basic in_order support
vhost: basic in order support
vhost: fail early when __vhost_add_used() fails
vhost: Reintroduce kthread API and add mode selection
vdpa: Fix IDR memory leak in VDUSE module exit
vdpa/mlx5: Fix release of uninitialized resources on error path
vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limit
virtio: virtio_dma_buf: fix missing parameter documentation
vhost: Fix typos
vhost: vringh: Remove unused functions
vhost: vringh: Remove unused iotlb functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
|
|
Some calls to the tracing ring buffer can happen when the ring buffer is
already being written to by the same context (for example, a
trace_printk() in between a ring_buffer_lock_reserve() and a
ring_buffer_unlock_commit()).
In order to not trigger the recursion detection, these functions use
ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard() for
these functions so that their use cases can be simplified and not need to
use goto for the release.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250801203857.710501021@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- sbsa: Adjust keepalive timeout to avoid MediaTek WS0 race condition
- Various improvements and fixes
* tag 'linux-watchdog-6.17-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sbsa: Adjust keepalive timeout to avoid MediaTek WS0 race condition
watchdog: dw_wdt: Fix default timeout
watchdog: Don't use "proxy" headers
watchdog: it87_wdt: Don't use "proxy" headers
watchdog: renesas_wdt: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
watchdog: iTCO_wdt: Report error if timeout configuration fails
watchdog: rti_wdt: Use of_reserved_mem_region_to_resource() for "memory-region"
dt-bindings: watchdog: nxp,pnx4008-wdt: allow clocks property
watchdog: ziirave_wdt: check record length in ziirave_firm_verify()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Qualcomm Milos Synopsys eUSB2 PHY, SM8750 QMP phy support, M31
eUSB2 PHY driver
- Samsung Exynos990 usbdrd phy, Exynos7870 MIPI phy support
- Renesas RZ/V2N usb2-phy support
Updates:
- Bulk Yaml binding conversion By Rob H (too many to be listed)
- cadence: Sierra PCIe, USB PHY multilink configuration support
- Qualcomm refactoring of UFS PHY reset and UFS driver support for
phy calibrate API"
* tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (74 commits)
phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence
dt-bindings: phy: Convert brcm,sr-usb-combo-phy to DT schema
dt-bindings: phy: Convert ti,da830-usb-phy to DT schema
dt-bindings: phy: marvell,mmp2-usb-phy: Drop status from the example
dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties
phy: exynos-mipi-video: correct cam0 sysreg property name for exynos7870
phy: qcom: phy-qcom-snps-eusb2: Update init sequence per HPG 1.0.2
phy: qcom: phy-qcom-snps-eusb2: Add missing write from init sequence
dt-bindings: phy: qcom,snps-eusb2: document the Milos Synopsys eUSB2 PHY
dt-bindings: usb: qcom,snps-dwc3: Add Milos compatible
phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal
phy: rockchip-pcie: Enable all four lanes if required
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615
phy: qcom: qmp-combo: Add missing PLL (VCO) configuration on SM8750
phy: qcom: m31-eusb2: drop registration printk
phy: qcom: m31-eusb2: fix match data santity check
phy: qcom: qmp-pcie: Update PHY settings for QCS8300 & SA8775P
phy: qualcomm: phy-qcom-eusb2-repeater: Don't zero-out registers
dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values
phy: mediatek: tphy: Cleanup and document slew calibration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"A couple of small core changes and driver updates:
- Core: handling of nesting irqs to outside the lock, stream
parameters handing on port prep failures.
- AMD driver support for ACP 7.2 platforms and improved handing of
slave alerts and resume sequences
- Qualcomm updating driver debug spew
- Intel BPT message length limitations, rt721 codec as wake capable
etc"
* tag 'soundwire-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: Add support for acp7.2 platform
soundwire: stream: restore params when prepare ports fail
soundwire: debugfs: move debug statement outside of error handling
soundwire: amd: add check for status update registers
soundwire: intel_auxdevice: add rt721 codec to wake_capable_list
soundwire: Correct some property names
soundwire: update Intel BPT message length limitation
soundwire: intel_ace2.x: Use str_read_write() helper
soundwire: amd: cancel pending slave status handling workqueue during remove sequence
soundwire: amd: serialize amd manager resume sequence during pm_prepare
soundwire: qcom: demote probe registration printk
ASoC: cs42l43: Remove unnecessary work functions
soundwire: Move handle_nested_irq outside of sdw_dev_lock
MAINTAINERS: Remove Sanyog Kale as reviewer on SoundWire
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing
When tracefs was first introduced back in 2014, the directory
/sys/kernel/tracing was added and is the designated location to mount
tracefs. To keep backward compatibility, tracefs was auto-mounted in
/sys/kernel/debug/tracing as well.
All distros now mount tracefs on /sys/kernel/tracing. Having it seen
in two different locations has lead to various issues and
inconsistencies.
The VFS folks have to also maintain debugfs_create_automount() for
this single user.
It's been over 10 years. Tooling and scripts should start replacing
the debugfs location with the tracefs one. The reason tracefs was
created in the first place was to allow access to the tracing
facilities without the need to configure debugfs into the kernel.
Using tracefs should now be more robust.
A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED which is
default y, so that the kernel is still built with the automount. This
config allows those that want to remove the automount from debugfs to
do so.
When tracefs is accessed from /sys/kernel/debug/tracing, the
following printk is triggerd:
pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");
This gives users another 5 years to fix their scripts.
- Use queue_rcu_work() instead of call_rcu() for freeing event filters
The number of filters to be free can be many depending on the number
of events within an event system. Freeing them from softirq context
can potentially cause undesired latency. Use the RCU workqueue to
free them instead.
- Remove pointless memory barriers in latency code
Memory barriers were added to some of the latency code a long time
ago with the idea of "making them visible", but that's not what
memory barriers are for. They are to synchronize access between
different variables. There was no synchronization here making them
pointless.
- Remove "__attribute__()" from the type field of event format
When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y
and PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with
the following:
field:const char * filename; offset:24; size:8; signed:0;
Turns into:
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
This confuses parsers. Add code to strip these tags from the strings.
- Add eprobe config option CONFIG_EPROBE_EVENTS
Eprobes were added back in 5.15 but were only enabled when another
probe was enabled (kprobe, fprobe, uprobe, etc). The eprobes had no
config option of their own. Add one as they should be a separate
entity.
It's default y to keep with the old kernels but still has
dependencies on TRACING and HAVE_REGS_AND_STACK_ACCESS_API.
- Add eprobe documentation
When eprobes were added back in 5.15 no documentation was added to
describe them. This needs to be rectified.
- Replace open coded cpumask_next_wrap() in move_to_next_cpu()
- Have preemptirq_delay_run() use off-stack CPU mask
- Remove obsolete comment about pelt_cfs event
DECLARE_TRACE() appends "_tp" to trace events now, but the comment
above pelt_cfs still mentioned appending it manually.
- Remove EVENT_FILE_FL_SOFT_MODE flag
The SOFT_MODE flag was required when the soft enabling and disabling
of trace events was first introduced. But there was a bug with this
approach as it only worked for a single instance. When multiple users
required soft disabling and disabling the code was changed to have a
ref count. The SOFT_MODE flag is now set iff the ref count is non
zero. This is redundant and just reading the ref count is good
enough.
- Fix typo in comment
* tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Add documentation about eprobes
tracing: Have eprobes have their own config option
tracing: Remove "__attribute__()" from the type field of event format
tracing: Deprecate auto-mounting tracefs in debugfs
tracing: Fix comment in trace_module_remove_events()
tracing: Remove EVENT_FILE_FL_SOFT_MODE flag
tracing: Remove pointless memory barriers
tracing/sched: Remove obsolete comment on suffixes
kernel: trace: preemptirq_delay_test: use offstack cpu mask
tracing: Use queue_rcu_work() to free filters
tracing: Replace opencoded cpumask_next_wrap() in move_to_next_cpu()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull initial deferred unwind infrastructure from Steven Rostedt:
"This is the core infrastructure for the deferred unwinder that is
required for sframes[1]. Several other patch series are based on this
work although those patch series are not dependent on each other. In
order to simplify the development, having this core series upstream
will allow the other series to be worked on in parallel. The other
series are:
- The two patches to implement x86 support [2] [3]
- The s390 work [4]
- The perf work [5]
- The ftrace work [6]
- The sframe work [7]
And more is on the way.
The core infrastructure adds the following in kernel APIs:
- int unwind_user_faultable(struct unwind_stacktrace *trace);
Performs a user space stack trace that may fault user pages in.
- int unwind_deferred_init(struct unwind_work *work, unwind_callback_t func);
Allows a tracer to register with the unwind deferred
infrastructure.
- int unwind_deferred_request(struct unwind_work *work, u64 *cookie);
Used when a tracer request a deferred trace. Can be called from
interrupt or NMI context.
- void unwind_deferred_cancel(struct unwind_work *work);
Called by a tracer to unregister from the deferred unwind
infrastructure.
- void unwind_deferred_task_exit(struct task_struct *task);
Called by task exit code to flush any pending unwind requests.
- void unwind_task_init(struct task_struct *task);
Called by do_fork() to initialize the task struct for the
deferred unwinder.
- void unwind_task_free(struct task_struct *task);
Called by do_exit() to free up any resources used by the
deferred unwinder.
None of the above is actually compiled unless an architecture enables it,
which none currently do"
Link: https://sourceware.org/binutils/wiki/sframe [1]
Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.260781923@kernel.org/ [2]
Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.432327787@kernel.org/ [3]
Link: https://lore.kernel.org/linux-trace-kernel/20250710163522.3195293-1-jremus@linux.ibm.com/ [4]
Link: https://lore.kernel.org/linux-trace-kernel/20250718164119.089692174@kernel.org/ [5]
Link: https://lore.kernel.org/linux-trace-kernel/20250424192612.505622711@goodmis.org/ [6]
Link: https://lore.kernel.org/linux-trace-kernel/20250717012848.927473176@kernel.org/ [7]
* tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
unwind: Finish up unwind when a task exits
unwind deferred: Use SRCU unwind_deferred_task_work()
unwind: Add USED bit to only have one conditional on way back to user space
unwind deferred: Add unwind_completed mask to stop spurious callbacks
unwind deferred: Use bitmask to determine which callbacks to call
unwind_user/deferred: Make unwind deferral requests NMI-safe
unwind_user/deferred: Add deferred unwinding interface
unwind_user/deferred: Add unwind cache
unwind_user/deferred: Add unwind_user_faultable()
unwind_user: Add user space unwinding API with frame pointer support
|
|
In preparation for using virtio_vsock_skb_rx_put() when populating SKBs
on the vsock TX path, rename virtio_vsock_skb_rx_put() to
virtio_vsock_skb_put().
No functional change.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-9-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When receiving a packet from a guest, vhost_vsock_handle_tx_kick()
calls vhost_vsock_alloc_linear_skb() to allocate and fill an SKB with
the receive data. Unfortunately, these are always linear allocations and
can therefore result in significant pressure on kmalloc() considering
that the maximum packet size (VIRTIO_VSOCK_MAX_PKT_BUF_SIZE +
VIRTIO_VSOCK_SKB_HEADROOM) is a little over 64KiB, resulting in a 128KiB
allocation for each packet.
Rework the vsock SKB allocation so that, for sizes with page order
greater than PAGE_ALLOC_COSTLY_ORDER, a nonlinear SKB is allocated
instead with the packet header in the SKB and the receive data in the
fragments. Finally, add a debug warning if virtio_vsock_skb_rx_put() is
ever called on an SKB with a non-zero length, as this would be
destructive for the nonlinear case.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-8-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio_vsock_alloc_linear_skb() checks that the requested size is at
least big enough for the packet header (VIRTIO_VSOCK_SKB_HEADROOM).
Of the three callers of virtio_vsock_alloc_linear_skb(), only
vhost_vsock_alloc_skb() can potentially pass a packet smaller than the
header size and, as it already has a check against the maximum packet
size, extend its bounds checking to consider the minimum packet size
and remove the check from virtio_vsock_alloc_linear_skb().
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-7-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In preparation for nonlinear allocations for large SKBs, rename
virtio_vsock_alloc_skb() to virtio_vsock_alloc_linear_skb() to indicate
that it returns linear SKBs unconditionally and switch all callers over
to this new interface for now.
No functional change.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-6-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When allocating receive buffers for the vsock virtio RX virtqueue, an
SKB is allocated with a 4140 data payload (the 44-byte packet header +
VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE). Even when factoring in the SKB
overhead, the resulting 8KiB allocation thanks to the rounding in
kmalloc_reserve() is wasteful (~3700 unusable bytes) and results in a
higher-order page allocation on systems with 4KiB pages just for the
sake of a few hundred bytes of packet data.
Limit the vsock virtio RX buffers to 4KiB per SKB, resulting in much
better memory utilisation and removing the need to allocate higher-order
pages entirely.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-5-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio_vsock_skb_rx_put() only calls skb_put() if the length in the
packet header is not zero even though skb_put() handles this case
gracefully.
Remove the functionally redundant check from virtio_vsock_skb_rx_put()
and, on the assumption that this is a worthwhile optimisation for
handling credit messages, augment the existing length checks in
virtio_transport_rx_work() to elide the call for zero-length payloads.
Since the callers all have the length, extend virtio_vsock_skb_rx_put()
to take it as an additional parameter rather than fish it back out of
the packet header.
Note that the vhost code already has similar logic in
vhost_vsock_alloc_skb().
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-4-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The functions:
vringh_abandon_kern()
vringh_abandon_user()
vringh_iov_pull_kern() and
vringh_iov_push_kern()
were all added in 2013 by
commit f87d0fbb5798 ("vringh: host-side implementation of virtio rings.")
but have remained unused.
Remove them and the two helper functions they used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Message-Id: <20250617001838.114457-3-linux@treblig.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
|
|
The functions:
vringh_abandon_iotlb()
vringh_notify_disable_iotlb() and
vringh_notify_enable_iotlb()
were added in 2020 by
commit 9ad9c49cfe97 ("vringh: IOTLB support")
but have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-Id: <20250617001838.114457-2-linux@treblig.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
The MMIO transport implementation creates a list of virtqueues for a
virtio device, while the same is already available in the struct
virtio_device.
Don't create a duplicate list, and use the other one instead.
While at it, fix the virtio_device_for_each_vq() macro to accept an
argument like "&vm_dev->vdev" (which currently fails to build).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <3e56c6f74002987e22f364d883cbad177cd9ad9c.1747827066.git.viresh.kumar@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- battery-info: replace any DT specific bits with fwnode usage
- replace any device-tree code with generic fwnode based handling
Power-supply drivers:
- ug3105_battery: use battery-info API
- qcom_battmgr: report capacity
- qcom_battmgr: support LiPo battery reporting
- add missing missing power-supply ref to a bunch of DT bindings
- update drivers regarding pm_runtime_autosuspend() usage
- misc minor fixes and cleanups
Reset drivers:
- misc minor cleanups"
* tag 'for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
power: supply: core: fix static checker warning
power: supply: twl4030_charger: Remove redundant pm_runtime_mark_last_busy() calls
power: supply: bq24190: Remove redundant pm_runtime_mark_last_busy() calls
MAINTAINERS: rectify file entry in QUALCOMM SMB CHARGER DRIVER
power: supply: max1720x correct capacity computation
MAINTAINERS: add myself as smbx charger driver maintainer
power: supply: pmi8998_charger: rename to qcom_smbx
power: supply: qcom_pmi8998_charger: fix wakeirq
power: supply: max14577: Handle NULL pdata when CONFIG_OF is not set
power: return the correct error code
power: reset: POWER_RESET_TORADEX_EC should depend on ARCH_MXC
power: supply: cpcap-charger: Fix null check for power_supply_get_by_name
power: supply: bq25980_charger: Constify reg_default array
power: supply: bq256xx_charger: Constify reg_default array
power: reset: at91-sama5d2_shdwc: Refactor wake-up source logging to use dev_info
power: reset: qcom-pon: Rename variables to use generic naming
power: supply: qcom_battmgr: Add lithium-polymer entry
power: supply: qcom_battmgr: Report battery capacity
power: supply: bq24190: Free battery_info
power: supply: ug3105_battery: Switch to power_supply_batinfo_ocv2cap()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- hardening of HID core parser against conversion to 0 bits in s32ton()
by buggy/malicious devices (Alan Stern)
- fix for potential NULL pointer dereference in hid-apple that could be
caused by malicious device with APPLE_MAGIC_BACKLIGHT quirk present
triggering overflow in data field (Qasim Ijaz)
- support for Wake-on-touch in intel-thc (Even Xu)
- support for "Input max input size control" and "Input interrupt
delay" I2C features in order to improve compatibility of THC devices
with legacy HIDI2C touch devices (Even Xu)
- support for Touch Bars on x86 MacBook Pros (Kerem Karabay)
- support for XP-PEN Artist 22R Pro (Joshua Goins)
- third party trackpart support for MacBookPro15,1 (Aditya Garg)
- Apple Magic Keyboard A311[89] USB-C support (Aditya Garg, Grigorii
Sokoli)
- support for operating modes in amd-sfh (Basavaraj Natikar)
- avoid setting up battery timer for Apple and Magicmouse devices
without battery (Aditya Garg)
- fix for behavior of the hid-mcp2221 driver for !CONFIG_IIO cases
(Heiko Schocher)
- other assorted fixups and device ID additions
* tag 'hid-for-linus-2025073101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits)
HID: core: Harden s32ton() against conversion to 0 bits
HID: apple: validate feature-report field count to prevent NULL pointer dereference
HID: core: Improve the kerneldoc for hid_report_len()
selftests/hid: sync python tests to hid-tools 0.10
selftests/hid: sync the python tests to hid-tools 0.8
selftests/hid: run ruff format on the python part
HID: magicmouse: use secs_to_jiffies() for battery timeout
HID: apple: use secs_to_jiffies() for battery timeout
HID: magicmouse: avoid setting up battery timer when not needed
HID: apple: avoid setting up battery timer for devices without battery
HID: amd_sfh: Enable operating mode
HID: uclogic: Add support for XP-PEN Artist 22R Pro
HID: rate-limit hid_warn to prevent log flooding
HID: replace scnprintf() with sysfs_emit()
HID: uclogic: make read-only array reconnect_event static const
HID: mcp-2221: Replace manual comparison with min() macro
HID: intel-thc-hid: Separate max input size control conditional list
HID: mcp2221: set gpio pin mode
HID: multitouch: add device ID for Apple Touch Bar
HID: multitouch: specify that Apple Touch Bar is direct
...
|
|
Instead of duplicating the same code for each architecture, move
the CFI type hash variables for BPF function types and related
helper functions to generic CFI code, and allow architectures to
override the function definitions if needed.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250801001004.1859976-7-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently x86 and riscv open-code 4 instances of the same logic to
define a u32 variable with the KCFI typeid of a given function.
Replace the duplicate logic with a common macro.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-developed-by: Maxwell Bland <mbland@motorola.com>
Signed-off-by: Maxwell Bland <mbland@motorola.com>
Co-developed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Dao Huang <huangdao1@oppo.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250801001004.1859976-6-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull bitmap updates from Yury Norov:
- find_random_bit() series (Yury)
- GENMASK() consolidation (Vincent)
- random cleanups (Shaopeng, Ben, Yury)
* tag 'bitmap-for-6.17' of https://github.com/norov/linux:
bitfield: Ensure the return values of helper functions are checked
test_bits: add tests for __GENMASK() and __GENMASK_ULL()
bits: unify the non-asm GENMASK*()
bits: split the definition of the asm and non-asm GENMASK*()
cpumask: Remove unnecessary cpumask_nth_andnot()
watchdog: fix opencoded cpumask_next_wrap() in watchdog_next_cpu()
clocksource: Improve randomness in clocksource_verify_choose_cpus()
cpumask: introduce cpumask_random()
bitmap: generalize node_random()
|
